grid-integrated charging with iso 15118 - sunspec...
TRANSCRIPT
Grid-integrated Charging with ISO 15118
Advanced Grid: Integration and Testing DER with Communications ESNA, San Diego, 2016-10-05 Stephan Voit, [email protected]
© 2016 KnGrid 10/6/16 PAGE 2
Agenda
> How to do grid integrated charging: Philosophy of ISO 15118
> ISO 15118 and Backend IT protocols
> ISO 15118 and IEC 61850
> Learnings from European project PlanGridEV
© 2016 KnGrid 10/6/16 PAGE 3
Design principles of ISO 15118
> Have a unique standard, which is accepted worldwide
> Make charging for the customer as easy as possible
> Respect requirements from EV drivers, energy production (e.g. renewables), and grid
> Be open for future enhancements
© 2016 KnGrid 10/6/16 PAGE 4
Philosophy of ISO 15118
> Use Control Pilot (CP) and Pulse Width Modulation (PWM) of SAE J1772 (similar to IEC 61851-1 ) for “safety”
> Support of several services
> Authentication: “External Identification Means” (EIM) and “Plug ‘nd Charge” (PnC)
> Handling of digital certificates and electronic signatures
> Charging AC (Alternating Current) and DC (Direct Current)
> Respecting customer requirements
> Allows respecting of availability of capacity and power at (distribution) grid
> Allows respecting of price tables from energy (re)seller
> (Re)negotiation of a charge profile with new parameters
> Value Added Services
> Respect security and privacy
> Provide enough bandwidth by using PLC technology based on HomePlug GreenPHY
> EV acts as a client, EVSE acts as a server
© 2016 KnGrid 10/6/16 PAGE 5
Future development of ISO 15118 Second Edition
> Correction / enhancement of misunderstood or unprecise definitions
> Integration of wireless communication
> Integrate a first solution for Reverse Power Transfer (energy feedback)
© 2016 KnGrid 10/6/16 PAGE 6
ISO 15118 and Backend IT protocols
> Communication with Secondary Actors (SA) is not defined within ISO 15118
> Several data structures are defined for data exchange with SA
> EU funded project Green eMotion started the discussion on how to bring together the best of existing backend IT protocols
> At the time common understanding is to start standardization at OASIS, then hand it over to IEC
PROOF/ÉPREUVE
ISO/IEC 15118-1:2013(E)
6 Actors
6.1 General
Figure 1 — Overview with examples of participating actors in the overall scenario
Figure 1 shows all primary and secondary actors as well as their trigger functions that may be involved directly or indirectly in the charging procedure of ISO/IEC 15118. The use case element descriptions in clause 7 will incorporate, where applicable, those actors and functions.Primary actors are directly involved in the charging process. The information flow between EVCC and the SECC shall be specified according to all layers of the Open Systems Interconnection (OSI) reference model in accordance with ISO 7498.
The vehicle user (USER) plays an important role in the full context of charging EVs using the charging infrastructure. For implementing EVSE’s it is crucial to understand this role and the interactions between the charging system and the vehicle USER. However, this standard is not intended to establish requirements relative to USER behaviour. Whenever the term ‘USER’ is used in this standard as the subject of a requirement this is rather meant to provide guidance for the implementer of the standard how a USER can behave and how a user should be guided by any means than defining the exact behaviour of the USER.Although this standard does not specify the protocol between the primary actors and a secondary actor, there are messages defined in ISO/IEC 15118-2, which include elements to exchange data between these actors.
NOTE 1 Secondary actors may be involved in the charging process due to supplying information to the EVCC needed for the charging process. Depending on the use case element, they may be involved but a specific relation is not described in ISO/IEC 15118. Due to country-specific characteristics, the supply of information to the SECC may be done by centralised actors such as financial and demand clearing house and meter operator, or directly by secondary actors i.e. Electricity Provider or distribution system operator.NOTE 2 Not all primary actors are necessarily located within the EVSE.
14 © ISO/IEC 2013 – All rights reserved
Source: ISO 15118-1; Figure 1 — Overview with examples of participating actors in the overall scenario
© 2016 KnGrid 10/6/16 PAGE 7
ISO 15118 and IEC 61850
> IEC 61850-90-8 TR Ed.1.0:2015 “Communication networks and systems for power utility automation - Part 90-8: Object model for electric mobility”
> Object model was essential influenced by ISO/IEC 15118 Joint Working Group
IEC DTR 61850-90-8 © IEC 2015 21
3.1 E-Mobility actors and their roles 288
The E-Mobility domain involves a multitude of new stakeholders for charging EVs. The diagram in 289
Figure 4 provides an overview on the generic role model for actors involved on both the EV side 290
(green elements) and the power system (blue elements). 291
292
Figure 4: Generic role model of relevant actors for smart charging EVs [CEN BT N987] 293
NOTE: The diagram may not be exhaustive with respect to real-world actors. 294
Each of the actors involved has a specific role in the context of this technical report. In a real-life 295
scenario more actors could be combined into one legal entity. E.g. the Charging Infrastructure 296
Operator and the E-Mobility Service Provider could be the same legal entity. 297
The role model considers both public and private charging scenarios. In the public scenario more 298
service providers could share a charging spot operated by a 3rd party. 299
All the actors are defined in clause 1.3.1. 300
Charging Infrastructure
Operator
E-Mobility Service Provider
E-Mobility Clearing House
Energy Supplier (Retailer) Grid
congestions
Electric Vehicle User Charging
needs
Roaming serviceoffer/request
Bilateral agreement
Driving and parkingneeds
Data exchange
Energy purchase
Relationship between Actors
Energy flow
New E-Mobility Actors
Power System Actors
Electric Vehicle Supply
Equipment
BuildingEnergy Management
System
Distribution System Operator
Electric Vehicle
Charging limits
Roaming serviceoffer/request
Energy purchase
Mobility service needs
Charging Station
Source (top): IEC 61850-90-8 TR Ed.1.0:2015; Figure 4: Generic role model of relevant actors for smart charging EVs
Source (left): IEC 61850-90-8 TR Ed.1.0:2015; Figure 6: IEC 61850 Logical Nodes overview, based on [IEEE VPPC2012]
26 IEC DTR 61850-90-8 © IEC 2015
Common information model for electric vehicles 341
The basic idea behind this technical report is to describe one information model in terms of IEC 342 61850 logical nodes, reflecting EVs plugged into supply equipments from the point of view of the 343 power grid. 344
This technical report does not define how the exact implementation should be made. However, 345 independent of the underlying hardware architecture as well as communication technologies / 346 protocols behind the data exchange, the different information models should be harmonized. 347
From a power grid point of view, the operations of AC and DC charging an EV are very similar. 348 Technically, the difference is in the placement of the charging equipment: on-board for AC charging, 349 off-board for DC charging. This has an influence on the communication requirements between the 350 EV and the charge spot which is already covered in [ISO 15118-2:2014]. The real difference is in 351 the services provided to the connected EV in terms of charging power. Typically, dedicated off-352 board DC charging equipments provide higher charging power rates. 353
However, from the grid’s point of view an EV connected to an AC or DC charging socket, basically 354 has the same need: Power is drawn from the grid connection point based upon requirements of the 355 connected EV. In that respect it provides the same basic information relevant for power grid 356 operations. Hence this technical report models AC and DC chargers using a very similar LN model 357 shown in Figure 6. 358
359
Figure 6: IEC 61850 Logical Nodes overview, based on [IEEE VPPC2012] 360
361
Elect ric VehicleDC Supply Equipment
Battery
Battery Mgmt. System (BMS)
AC/DCConverter
LogicalNodes
MMTR
Logical Node according to IEC 61850Newly defined Logical Nodes
DEEV: Electric Vehicle MMTR: Metering XSBI: Circuit Switch DSCH: SchedulesDESE: E-mobility Supply Equipment MMXU: Measurement Unit XCBR: Circuit Breaker ZSAR: Surge ArrestorDEAO: AC OutLet DEDO: DC Outlet
XCBR XSWI
ZSAR
ZCAB DEDO
DESE
DEEV
FSCH
FSCH
MMXU
Elect ric VehicleAC Supply Equipment
Battery Mgmt. System (BMS)
Communication Controller
MMTR XCBR XSWI
ZSAR
ZCAB DEAO
DESE
DEEV
FSCH
FSCH
MMXU
Comm. Controller
XFUS
AC/DCConverter
Battery
© 2016 KnGrid 10/6/16 PAGE 8
Learnings from European project PlanGridEV [see http://www.plangridev.eu/project-output.html]
FP7 Call for proposal: Energy.2013.7.3.1
Project Consortium: 12 partners including 4 DSOs, renowned research institutions, universities and car manufacturers
Duration: June 2013 – February 2016
Project budget: Total 7.5 M€
Distribution Grid Planning and operational principals for EV mass roll-out while enabling DER integration
LV MV
?
?
How to derive grid planning rules for a changing environment?
© 2016 KnGrid 10/6/16 PAGE 9
DEREV CSEVSE GO
Front.End0Communication Back.End0Communication
Services(related toPlanGridEV(scenarios
Other(services
Other0DER0andLoads
Jan 2013 Feb 2013 Mar 2013 Apr 2013
May 2013 Jun 2013 Jul 2013 Aug 2013
Sep 2013 Oct 2013 Nov 2013 Dec 2013
0
1
2
3
0
1
2
3
0
1
2
3
0.00
0.25
0.50
0.75
0.00
0.25
0.50
0.75
0.00
0.25
0.50
0.75
0.00
0.25
0.50
0.75
Clearness index
dens
ity
Type of Clearness sampled beta measured data
EV Charging Profiles Planning Tools
DER Models
PlanGridEV: New EV and DER models and tools have been used to analyze the future grid planning problem
© 2016 KnGrid 10/6/16 PAGE 10
BACKUP
© 2016 KnGrid 10/6/16 PAGE 11
EV Supply Equipment (Charge point) Electric Vehicle
Data Communication controls Charging Session for better Integration of renewable Energy
Example: Controlling charging session according to ISO 15118-2
Valid ID can be used for charging up to 22 kW; load & price table enclosed
Contactor closed; send start meter reading
Special wind offer: 4 AM to 6 AM, price minus 10%
Send stop meter reading; please sign meter reading
Cable connected, CP/PWM ok, ask for service available
I want to charge with costs, my authentication ID is “1234”
Lock connector; I will charge from 2 AM to 6 AM at 5 kW
Offer accepted: I will charge from 4 AM to 6 AM at 11 kW
I want to stop charging session; open contactor
Signing drawn energy, unlock cable, end of communication
1
2
3
4
5
6
7
8
9
10
Backend System
Checking auth. ID, perhaps request at eRoaming platform
Calculation of charging profile; chosen price table
Capacity reservation, perhaps communication with Smart Grid
Capacity reservation, perhaps communication with Smart Grid
Provide charge data (Service Detail Record) for billing
Chose highest protocol version, send service list
Charging
Contactor opened
© 2016 KnGrid 10/6/16 PAGE 12
ISO 15118 uses Pmax and Tariff Tables for easy Integration of EVs into Power Grid and Power Production Grid and Power Production Tariff Table
TariffStart [Seconds from now] 0 7.200 14.400 21.600 TariffPMax [Watt] 6.928 22.170 11.085 6.928 EPrice [relative, in %] 100% 70% 80% 100%
TariffPMax max. Amp per phase max. Watt
32 22.170 16 11.085 10 6.928
0 0 0 7.200 14.400 21.600 TariffStart
EPrice 100%
90% 80% 70% 60% 50% 40% 30% 20% 10%
0 7.200 14.400 21.600 TariffStart
TariffTableType Currency REL Tariff T1 EPriceUnit 1 (one percent) EPriceMuliplier 1
Source: According to Committee Draft ISO 15118-2
© 2016 KnGrid 10/6/16 PAGE 13
Load Management according to ISO 15118 with a Smart fortwo ed 3 connected to an KnGrid Charge Spot
> Charging power was restricted by cable, installation, feed-in and grid transmission capacity to max. 22 kW.
> Electricity reseller offered a special price for this charging session at 50 % off, but between 10:30 and 11:00 AM normal price (100 %) had to be paid. During this period EV stopped charging.
EVSE offered charge profile
EV chosen charge profile