gridftp and srb
DESCRIPTION
GridFTP and SRB. Guy Warner Training, Outreach and Education Team, Edinburgh e-Science. Acknowledgement. GridFTP slides are slides given by Bill Allcock of Argonne National Laboratory at the GridFTP Course at NeSC in January 2005 With some minor presentational changes - PowerPoint PPT PresentationTRANSCRIPT
http://www.ngs.ac.uk
http://www.eu-egee.org/http://www.pparc.ac.uk/
http://www.nesc.ac.uk/training
GridFTP and SRB
Guy Warner
Training, Outreach and Education Team, Edinburgh e-Science
Acknowledgement
• GridFTP slides are slides given by Bill Allcock of Argonne National Laboratory at the GridFTP Course at NeSC in January 2005
• With some minor presentational changes
• SRB slides are selected from several sources, specifically from talks given by Wayne Schroeder (SDSC) and Peter Berrisford (RAL)
GridFTP
What is GridFTP?
• A secure, robust, fast, efficient, standards based, widely accepted data transfer protocol
• A Protocol– Multiple independent implementations can interoperate
• This works. Both the Condor Project at Uwis and Fermi Lab have home grown servers that work with ours.
• Lots of people have developed clients independent of the Globus Project.
• Globus also supply a reference implementation:– Server
– Client tools (globus-url-copy)
– Development Libraries
Basic Definitions
• Network Endpoint– Something that is addressable over the network (i.e. IP:Port).
Generally a NIC
– multi-homed hosts
– multiple stripes on a single host
• Parallelism– multiple TCP Streams between two network endpoints
• Striping– Multiple pairs of network endpoints participating in a single
logical transfer (i.e. only one control channel connection)
Striped Server
• Multiple nodes work together and act as a single GridFTP server
• An underlying parallel file system allows all nodes to see the same file system and must deliver good performance (usually the limiting factor in transfer speed)– I.e., NFS does not cut it
• Each node then moves (reads or writes) only the pieces of the file that it is responsible for.
• This allows multiple levels of parallelism, CPU, bus, NIC, disk, etc.– Critical if you want to achieve better than 1 Gbs without breaking the bank
MODE ESPAS (Listen) - returns list of host:port pairsSTOR <FileName>
MODE ESPOR (Connect) - connect to the host-port pairsRETR <FileName>
18-Nov-03
GridFTP Striped Transfer
Host Z
Host Y
Host A
Block 1
Block 5
Block 13
Block 9
Host B
Block 2
Block 6
Block 14
Block 10
Host C
Block 3
Block 7
Block 15
Block 11
Host D
Block 4
Block 8 - > Host D
Block 16
Block 12 -> Host D
Host X
Block1 -> Host A
Block 13 -> Host A
Block 9 -> Host A
Block 2 -> Host B
Block 14 -> Host B
Block 10 -> Host B
Block 3 -> Host C
Block 7 -> Host C
Block 15 -> Host C
Block 11 -> Host C
Block 16 -> Host D
Block 4 -> Host D
Block 5 -> Host A
Block 6 -> Host B
Block 8
Block 12
Parallel StreamsAffect of Parallel Streams
ANL to ISI
0
10
20
30
40
50
60
70
80
90
100
0 5 10 15 20 25 30 35
Number of Streams
Ban
dw
idth
(M
bs)
BWDP
• TCP is reliable, so it has to hold a copy of what it sends until it is acknowledged.
• Use a pipe as an analogy• I can keep putting water in until it is full.• Then, I can only put in one gallon for each gallon
removed.• You can calculate the volume of the tank by taking the
cross sectional area times the height• Think of the BW as the cross-sectional area and the RTT
as the length of the network pipe.
globus-url-copy: 1
• Command line scriptable client• Globus does not provide an interactive client• Most commonly used for GridFTP, however, it supports
many protocols– gsiftp:// (GridFTP, historical reasons)
– ftp://
– http://
– https://
– file://
globus-url-copy: 2• globus-url-copy [options] srcURL dstURL
• Important Options
• -p (parallelism or number of streams)– rule of thumb: 4-8, start with 4
• -tcp-bs (TCP buffer size)– use either ping or traceroute to determine the Round Trip Time (RTT) between
hosts– buffer size = BandWidth (Mbs) * RTT (ms) *(1000/8) / P– P = the value you used for –p
• -vb if you want performance feedback
• -dbg if you have trouble
Other Clients
• Globus also provides a Reliable File Transfer (RFT) service
• Think of it as a job scheduler for data movement jobs.• The client is very simple. You create a file with source-
destination URL pairs and options you want, and pass it in with the –f option.
• You can “fire and forget” or monitor its progress.
TeraGrid Striping results
• Ran varying number of stripes• Ran both memory to memory and disk to disk.• Memory to Memory gave extremely high linear
scalability (slope near 1).• Achieved 27 Gbs on a 30 Gbs link (90% utilization)
with 32 nodes.• Disk to disk - limited by the storage system, but still
achieved 17.5 Gbs
SRB
What is SRB
• Storage Resource Broker (SRB) is a software product developed by the San Diego Supercomputing Centre (SDSC).
• Allows users to access files and database objects across a distributed environment.
• Actual physical location and way the data is stored is abstracted from the user
• Allows the user to add user defined metadata describing the scientific content of the information
Storage Resource Broker
SRB serverResource Driver
SRB serverResource Driver
SRB serverResource Driver
Filesystems in different administrative domains
User sees a virtual filesytem: – Command line (S-Commands)
– MS Windows (InQ)
– Web based (MySRB).
– Java (JARGON)
– Web Services (MATRIX)
How SRB WorksMCATDatabase
MCATServer
SRB AServer
SRB BServer
SRBClient
a
b
c d
e
f
g
• 4 major components:
– The Metadata Catalogue (MCAT)
– The MCAT-EnabledSRB Server
– The SRB Storage Server
– The SRB Client
SRB on the NGS
• SRB provides NGS users with– a virtual filesystem
– Accessible from all core nodes and from the “UI” / desktop
– (will provide) redundancy – mirrored catalogue server
– Replica files
– Support for application metadata associated with files
– fuller metadata support from the “R-commands”
Practical Overview
• Use of the Scommands for SRB– Commands for unix based access to srb
– Strong analogy to unix file commands
• Accessing files from multiple (two) sites using SRB• globus-url-copy usage