grow light s y s t e m overview and product catalog 2020 - independence led … · 2020-01-26 ·...

www.IndependenceLED.com

MADE in USA

20

20

GROW LIGHT S Y S T E M

Overview and Product Catalog

Cannabis + Leafy Greens

www.IndependenceLED.com 2

Our fixtures, with custom wavelength mixes of diodes, deliver added revenue for indoor and glasshouse cannabis growers, as well as energy savings on electricity.

Proven ResultsExample: Salinas, California – Glasshouse winter production with natural light yielded .28 lbs per plant per harvest (approx 1/4 lb), but with our Independence LED fixtures, four different strains yielded on average .32 lbs per plant per harvest (approx 1/3 lb). This 14% lift generates revenue far more than the small cost of electricity during the three month flowering period. A Master Grower, was recently very pleased to send photos (above) and report that “On this pic you can see trichomes growing on the sugar trim and more cola development than on the plants without your LEDs."

Cannabis Overview

INCREASED YIELD with Independence LED’s Custom Cannabis Grow Lights

Larger Flowers: 14% lift in pounds per harvestMore Trichomes = Higher THC

More Trichomes with our LEDs

Typical Trichomes without LEDs


Cannabis 101

3

Knowledge = Plant Power

Sugar Trim Sugar trim or sugar leaves refer to the

small leaves that hold cannabis buds together. They are called sugar leaves due to the high concentration of trichomes that cover the leaf with a sugar-like appearance. Because of their high concentration of cannabinoids and terpenes, sugar leaves are typically trimmed off of the plant after it has been harvested and are then used for the production of concentrates.

Coda A cola refers to a cluster of buds that grow tightly

together. While smaller colas occur along the budding sites of lower branches, the main cola (sometimes called the apical bud) forms at the very top of the plant.

Trichomes(Greek τρίχωμα meaning "hair"), are fine outgrowths orappendages on plants, algae,

lichens, and certain protists.Trichomes are responsible for producing the cannabis plant’s cannabinoids and terpenes. Trichomes contain resin glands that make the terpenes, THCA, CBDA, and other phytocannabinoids for which cannabis is known.


Our fixtures, with full spectrum output, deliver added revenue for indoor and glasshouse leafy green growers, as well as energy savings on electricity.

Proven ResultsExample: Eastern Shore, Maryland – Indoor poultry building conversions into lettuce and basil farms. Our most popular fixture is the four (4) module HB Series fixture (above) with the i-Beam form factor. We typically run six rows of three fixtures for hydroponic Grow Tables (8’ x 36’) that are often in sets of 28 for Grow Pods that include 8,000 sq ft of grow area. These pods are in poultry buildings that are 50’ x 500’, and this is just one of many applications for our full spectrum grow light technology. Fresh, local, and pesticide free vegetables are part of a growing trend of cost-effective “Future Food”.

Leafy Green Overview

INCREASED YIELD with Independence LED’s Full Spectrum Grow Lights

Consistent Plant Size: Even PPFD (Photosynthetic Photon Flux Density)Faster Growth to Harvest = More Plants

Still FRESH – over a month from harvest

from germination through to

harvest

4


Independence LED is pleased to offer Cannabis and Leafy Green growers a diverse

range of options to meet the specific needs of their plants at any given type of farming

operation. Each form factor includes options for custom wavelength mixes.

#1: Grow Light Rack Systems from 4' to 8' in length:

For Vegetation: https://independenceled.com/pdfs/iLED-Grow-Rack-Veg-Datasheet-6-11-17.pdf

For Flowering: https://independenceled.com/pdfs/Independence-LED-Grow-System-GS1250-Flower-datasheet-

1.25.17.pdf These systems are also available in Full Spectrum White Light (Growers choice of 70, 80, or 90 CRI)

Same cost regardless of CRI

#2: Grow Light Fixtures (i-Bean) High Bay Series

4' x 1.5' form factor that is an i-Beam fixture, rather than a rack system.

We use the High Bay (HB) housing per this spec sheet below and the variables for growers include

Veg Mix, Flowering Mix, Custom Mixes, and full spectrum White Light (most popular at 80 CRI)

HB Series Specs: https://independenceled.com/pdfs/iLED-HighBay-DataSheet.pdf

#3: Strip Fixture

Two and Three Module 4' x 4.38“ - Variable choices regarding wavelength mix

See the HB Series Specs (Same file as i-Bream): https://independenceled.com/pdfs/iLED-HighBay-

DataSheet.pdf

#4: Remote Pendant System

This is typically used for enhancing light in glasshouses and comes in standard 4' lengths with aircraft cable, and

all of the wavelength mix options including full spectrum.

Specs: https://independenceled.com/pdfs/Independence-LED-Remote-Pendant-System-Specification-

5.10.16.pdf

#5: Tube Series and Retrofit Kits (External Driver Modules)

These are ideal for replacing fluorescent tubes with the LED advantages of color mix

(Lengths 2' to 8’) Specs: https://independenceled.com/pdfs/Independence-LED-Retro-Fit-Kit-Specification-All-

Lengths-8.27.18.pdf

#6: Driverless Fixtures

Any of the above fixtures come with "traditional" LED drivers as well as options to integrate as "driverless"

fixtures with a Direct Current (DC) Microgrid for advanced energy savings though a Power Hub Driver

(PhD). This is most applicable for grow operations that currently have renewable power such as solar

photovoltaic (PV) or wind energy...or have renewables in their short term business model.

#7: Custom Engineering

As an example, we offer rotating beam angles. This is a key advantage for growers that want to slightly adjust

the beam angle at the end or side of their planting beds to "tune" the PPFD distribution and maximize growth.

See video: https://www.youtube.com/watch?v=VixGbAeVNVY

Price: Unless otherwise provided, our agriculture systems and fixtures have

MSRP of $2 / watt. The Volume Wholesale cost is $1.60 / watt, subject to different

volume levels by form factor.

Catalog Highlights

5


Core Products

#1: Grow Light Rack System MADE in USA10 Year Warranty

Technology Advantages:• Customized Photosynthetic Photon Flux

Density (PPFD) mix on the fixtures and modular system.

• Even light distribution• Natural light integration for greenhouse

applications

Description System Wattage PAR @ 12" PAR / Watt Part #

4' x 8' Rack (12) 8' Modules 1,250 475 0.38 GS1250

Coverage Area (sq ft) Watts / sq ft PAR @ 24" PAR / Watt (Custom wavelengths)

60 21 375 0.30 Vegetation and Flowering

SPEC SHEETS: www.IndependenceLED.com/Spec-Sheets

6


Core Products

#2: Grow Light Fixtures

Technology Advantages:• Customized Photosynthetic Photon Flux Density (PPFD) mix on the

fixtures and modular system.• Even light distribution

MADE in USA10 Year Warranty

Description System Wattage PAR @ 12" PAR / Watt Part #

4' 8 Module 380 545 1.43 8-Mod-VEGETATION Grow-Light

4' 8 Module 425 634 1.49 8-Mod-FLOWER Grow-Light


7


Core Products

#2 & #3: High Bay and Strip Fixtures


2 Module: 108 Watts: 14,200 lm 3 Module: 162 Watts: 21,300 lm

4 Module: 216 Watts: 28,400 lm 6 Module: 324 Watts: 42,600 lm

Technology Advantages:• The 7,100 lumen linear modules on the high bays have deep fin

aluminum heat sinks and aluminum printed circuit boards that are powered by the high performance external drivers for maximum thermal management.

• The modularity of the system provides maximum flexibility.• The simple elegance of the engineering design with extruded vs cast

aluminum reduces the cost to optimize the ROI.


Description System Wattage Lumens Lm/W Part #

4' 2 Module 108 14200 131 HB2-45450K-70-C

4' 3 Module 162 21300 131 HB3-45450K-70-C

4' 4 Module 216 28400 131 HB4-45450K-70-C

4' 6 Module 324 42600 131 HB6-45450K-70-C

8


Core Products

#4: Remote Pendant System MADE in USA10 Year Warranty

Technology Advantages:• Vertical (stacked modules) and horizontal (side-

by-side modules) suspended with wires with excellent flexibility for color, direct, indirect, symmetrical and asymmetrical illumination.


4' Pendant, Direct 18 2500 139 Pdd-41850K-ghij

4' Pendant, Asymmetrical 24 3100 129 Pda-42450K-ghij

4' Pendant, Symmetrical 36 5000 139 PdSa-43650K-ghij

Options 2' and 8' Variable Variable Variable Consult Factory

- -


9


Independence LED’s Remote Pendant System: Specs: https://independenceled.com/pdfs/Independence-LED-Remote-Pendant-System-Specification-5.10.16.pdfVideo: https://www.youtube.com/watch?v=vTEPrbiDZNA

Up, Down, or Up and Down light. For the glasshouse, down only is most appropriate

Adjust the aircraft cable as the plants grow or set them high enough to anticipate the growth.

#4: Remote Pendant System (continued) MADE in USA10 Year Warranty


10


Core Products

#5: Tube Series and Retrofit Kits MADE in USA10 Year Warranty


Technology Advantages:• Heat Sink: Deep Fin Aircraft Grade Aluminum vs Thin Fin or Plastic • Printed Circuit Boards: Aluminum vs FR4 Boards• Driver: External vs Internal• Dimming Standard: Yes • Power Connection: Directly to the linear module vs using tombstones

(This is a key differentiator given existing fixtures with tombstone damage and for installation flexibility in placement for delamping.)

The external driver with the tombstone bypass is also a key advantage for “universal” utility rebate approval. Some utilities offer incentives for internal line direct divers or ballast compatible drivers, but our tubes typically earn rebates from ALL U.S. utility companies offering incentives.


(2) 2' Tubes 28 3650 130 R2-214xxK-85-zBy-V1DIM




PLUS: Ask about our Magnetic Strip

Retrofit Kits, Replaceable Driver System Tubes, and Strip Fixtures with Tubes.

Cross Section: Deep Fin Aircraft Grade Aluminum Heat Sink

11


#6: Driverless Fixtures


Advanced Energy Saving Technology for Direct Current (DC) Microgrids

LEARN MORE: www.independenceled.com/dc-microgrids

Save 11.5% on energy!

12


#7: Custom Engineering


Our engineering team has developed numerous custom LED lighting solutions for our customers. Our custom design and production process starts with a needs assessment to provide the appropriate engineering.

The range of custom solution often includes technology integration such as:

• Optics• Reflectors• Housing Systems• Mounting Systems• Rotating Beam Angles• Direct Current Integrations• Specialty Plant Grow Light Systems• Hazardous Location Fixture Retrofits• Linear Kit Retrofits for Pendant and Sconce Fixtures

We design custom fixtures and retrofit kits for ANY lighting application!

LET US BUILD WHAT YOU NEED

13

www.IndependenceLED.com14

So lu t ions for Supp lementa l L igh t

HEMP for SEED Production in Greenhouses

See the Sample Form Factor and Spacing Grids on the Following Page


r² 3.14 x 81 = 254 sq in of shadow

15

Installation with Linear Modules Installation with Round FixturesEach 4’ Module = 7,100 lumens Each fixture = 36,000 lumensat 54 watts each at 240 watts each5 modules to achieve 35,500 lm Efficiency: 150 lm / wattEfficiency: 131.45 lm / watt (+ alternate option for higher output at

38,000 lm and 270 watts, 140 lm / watt)

Fixture size relative to “shadow” impact in greenhousesEach 4’ module is 1” wide and hangs from Each fixture is 18’ in diameter and hangsaircraft cable or chain at each end from aircraft cable or chain from center4.5 modules x 48” = 216 sq in of shadow1.5 sq ft of 32 sq ft coverage = .046% shadow 1.76 sq ft of 32 sq ft coverage = .055% shadow

32 sq ft of coverage area per fixture(5.65’ x 5.65’) for hanging optimization Layout: 1 fixture for 4’ x 8’ on 4’ structural members (dashed line)staggered on alternate rows for even distribution

32 sq ft of coverage area per fixture “set”of 5 modules Layout: Modules every 19.2” hung fromstructural members (dashed line) staggered on alternate rows for even distribution

So lu t ions for Supp lementa l L igh tForm FactorOptions


So lu t ions for Supp lementa l L igh t

HEMP for SEED Production in Greenhouses

21

3

1: Irrigation System 2: Canopy to provide 12 hours of darkness for male plants to rest and

develop pollen sacks 3: Trigger LED lights to provide minimal light that prevents Female plants

from flowering


So lu t ions for Supp lementa l L igh tResearch and Analytics to Maximize Performance:

Sample DLI across the U.S.

We support our farm customers and strategic partners with the key research and analytics to maximize yield using the most appropriate and cost-effective LED

technology. We consider Photosynthetic Photon Flux Density (PPFD) and run times relative to Daily Light Integral (DLI) specific to each geographic location and season.


So lu t ions for Supp lementa l L igh tResearch and Analytics: Sample Daylight Review for Maryland

Account


So lu t ions for Supp lementa l L igh tResearch and Analytics:

Sample natural light output relative to time of day


So lu t ions for Supp lementa l L igh tResearch and Analytics:

Sample light schedule across propagation


So lu t ions for Lea f y Greens

Controlled Environment Agriculture (CEA) Example: “Adaptive Reuse” Former Poultry Buildings

into Lettuce and Basil Farms

Sample Maryland Farm

4 Buildings(each 50’ x 500’)


So lu t ions for Lea f y GreensBlueprint for Success from Seedling to Harvest

(8’ x 36’ Grow Tables with 18 LED Fixtures each)

36

’ Lo

ng

Hyd

rop

on

ic P

lan

tin

g B

ed

8’ Wide


So lu t ions for Lea f y GreensBlueprint for Modular System running the Length of the Buildings

(Service aisles between and on the sides of the Grow Tables)

< ---500’ Long Poultry Buildings --->

Each Grow Table has 6 rows of 3 fixtures (18” x 48” each) for even PPFD delivery.

To maximize growth, we engineered reflectors to “save” the light that was wasted in the aisles. See the next two pages.


CROSS SECTION8’ wide planting “Grow Tables” with Three LED Fixtures (short end 18” wide x 48” Long)

with four linear modules in each.

PLAN (Layout from above)8’ wide planting “Grow Tables” with Three LED Fixtures (short end 18” wide x 48” Long)


CROSS SECTION8’ wide planting “Grow Tables” with Three LED Fixtures (short end 18” wide x 48” Long) with four linear

modules in each. Note that the modules on the outside edge of the plants are angled to increase the advantage of the mirroredfinish reflector flange.

PLAN (Layout from above)8’ wide planting “Grow Tables” with Three LED Fixtures (short end 18” wide x 48” Long)


+ -

PERPETUAL FOOD MACHINE Technology Integration

BioWaste Reactor +

Gasifier (Generator)


PERPETUAL FOOD MACHINE Technology Integration

1: Grow Lights – The rack of light emitting diode (LED) lights are the engines of photosynthesis.

3: Hydroponics – The method of growing plants without soil, using mineral nutrient solutions in a water solvent.

4: Aquaponics – The method that combines conventional aquaculture (raising aquatic animals such as fish in tanks) with hydroponics (cultivating plants in water) in a symbiotic environment.

5: Fish Food – Our system incorporates herbivore fish, such as tilapia, that eat algae and duck weed, which we can grow in addition to the vegetables under the LED grow lights. Beyond the vegetable production, this system also cultivates fresh fish for human consumption, given the ongoing breeding cycle of life. A Pescatarian Diet (plant-based + seafood) is one of the healthiest ways to get protein, fiber, and the key minerals and vitamins that sustain human life.

6: HVAC – The correct balance of heating, ventilation, and air conditioning is key for successful indoor agriculture.

7: Renewables (Solar, Wind, Fuel Cells, and BioWaste) – Where and when appropriate. For certain facilities on site power production is required when existing utilities do not provide enough amps to power the lighting and air conditioning demand.

8: Water – Collection and filtration is an added sustainability factor. Indoor farming with hydroponic or aquaponic systems typically use 90% less water than outdoor agriculture, but collecting water is one more way to reduce the impact of corporate industrial agriculture on the environment.

9: Batteries – Back up batteries for power storage are part of the system for energy resilience.

10: Smart Controls – The Internet of Things (IoT) creates excellent opportunities for wireless and remote oversight and performance monitoring of single and/or multiple facilities in different geographical areas across the U.S. and around the world.


#1: Proven Track Record #2: Multiple Industry FIRSTS#3: The Made in America Advantage#4: The Right Technology for Longevity#5: The Right Quality Assurance & Warranty#6: The Right Management & Support Team#7: The Right Auditing & ROI Software #8: Rebate Ready Products#9: Industry Leadership #10: $0 Down Financing

10 Reasons why Independence LED is the preferred choice in the LED marketplace.

Independence LED is your professional lighting solutions partner with American made LED manufacturing experience and insight. Established in 2007, we provide trusted LED lighting products and services. Independence LED manufactures award winning, U.S. made technology from our Pennsylvania production facilities. Independence LED delivers reliable and cost-effective LED lighting solutions. Period.

For our U.S. LED manufacturing, we are committed to building the highest quality and most reliable commercial LED lighting products on the market. Our 10 Year Warranty technology, with external independent drivers and aircraft grade aluminum deep fin heat sinks, consistently saves 65% or more on electricity over traditional lighting such as T8 fluorescent tubes and metal halide fixtures. Our agriculture clients range from cannabis to leafy green growers and our building illumination clients range from the Fortune 100 to the U.S. Navy.

In addition to winning the Green Business of the Year Award in 2011 from the Main LineChamber of Commerce, Independence LED won the 2013 Best Lighting Retrofit by the USGreen Building Council for the Urban Green Award.

Company Overview

28

www.IndependenceLED.comContact: Charlie Szoradi, CEO 610-551-5224 [email protected]

Total Facility SolutionsFIVE STAR“eco-system” of strategic partners to deliver the most cost-effective energy savings and grow performance

$0 Upfront Cost

Options

LED Lightinghttps://independenceled.com/

DC Microgridshttps://www.nextekpower.com/

Heat + Power Generationhttps://aegischp.com/

Performance Analyticshttps://growfitanalytics.com/

We welcome the opportunity to schedule a call

with one or more of

our partner companies.

THC Lift + Powdery Mildew Prevention

https://www.bioradiance3.com/

https://independenceled.com/

https://www.nextekpower.com/

https://aegischp.com/

https://growfitanalytics.com/

https://www.bioradiance3.com/

grow light s y s t e m overview and product catalog 2020 - independence led … · 2020-01-26 ·...

Documents