GRUNDFOS DATA BOOKLET

TP 100-30/4-A-F-A-BQQE 400Y 50HZ Grundfos pump 98958046

Thank you for your interest in our products. Please contact us for more information, or visit our website

https://www.lenntech.com/grundfos/TP000/98958046/TP-100-30-4-A-F-A-BQQE.html

info@lenntech.comtel. +31 152 610 900 fax. +31 152 616 289

BE > THINK > INNOVATE

Printed from Grundfos Product Centre [2018.06.003]

Position Qty. Description1 TP 100-30/4 A-F-A-BQQE

Product No.: On request

Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter.The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can beremoved for maintenance or service while the pump housing remains in the pipework.The pump is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756.Pipework connection is via PN 10 DIN flanges (EN 1092-2 and ISO 7005-2).The pump is fitted with a fan-cooled asynchronous motor.

Further product detailsPumpPump housing and pump head are electrocoated to improve the corrosion resistance.Electrocoating includes:1) Alkaline-based cleaning.2) Pretreatment with zinc phosphate coating.3) Cathodic electrocoating (epoxy).4) Curing of paint film at 200-250 °C.

1: Pump housing2: Impeller3: Shaft4: Coupling5: Pump head

The pump housing is provided with a replaceable stainles steel/PTFE neck ring to reduce the amount ofliquid running from the discharge side of the impeller to the suction side. The impeller is secured with asplit cone with nut.

The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the springand around the bellows. Due to the bellows, the seal does not wear the shaft, and the axial movementis not prevented by deposits on the shaft.Primary seal:

• Rotating seal ring material: silicon carbide (SiC)• Stationary seat material: silicon carbide (SiC)

This material pairing is used where higher corrosion resistance is required. The high hardness of thismaterial pairing offers good resistance against abrasive particles.Secondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

A circulation of liquid through the duct of the air vent screw ensures lubrication and cooling of the shaftseal.The flanges have tappings for mounting of pressure gauges.

1/11

Printed from Grundfos Product Centre [2018.06.003]

The motor stool forms connection between the pump housing and the motor, and is equipped with a manual air ventscrew for venting of the pump housing and the shaft seal chamber. The sealing between motor stool and pumphousing is an O-ring.

The central part of the motor stool is provided with guards for protection against the shaft and coupling.Motor and pump shaft are connected via a shell coupling.

MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.Electrical tolerances comply with IEC 60034.

The motor is flange-mounted with tapped-hole flange (FT).Motor-mounting designation in accordance with IEC 60034-7: IM B 14, IM V 18 (Code I) / IM 3601, IM3611 (Code II).

The motor does not incorporate motor protection and must be connected to a motor-protective circuitbreaker which can be manually reset. The motor-protective circuit breaker must be set according to therated current of the motor (I1/1).

Technical data

Liquid:Pumped liquid: WaterLiquid temperature range: -25 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³

Technical:Rated flow: 46.1 m³/hRated head: 2.8 mActual impeller diameter: 119 mmPrimary shaft seal: BQQECurve tolerance: ISO9906:2012 3B

Materials:Pump housing: Cast iron

EN-JL1040ASTM A48-40 B

Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304

Installation:Range of ambient temperature: -30 .. 40 °CMaximum operating pressure: 10 barFlange standard: DINPipe connection: DN 100Pump inlet: DN 100Pump outlet: DN 100Pressure rating: PN 10(@): 450 mmFlange size for motor: FT100

Electrical data:Motor type: 80ARated power - P2: 0.55 kWPower (P2) required by pump: 0.55 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 2.60/1.50 AStarting current: 430-470 %Cos phi - power factor: 0.79-0.70Rated speed: 1390-1410 rpmEfficiency: 70.0%Motor efficiency at full load: 70.0 %Motor efficiency at 3/4 load: 79 %

2/11

Printed from Grundfos Product Centre [2018.06.003]

Position Qty. DescriptionMotor efficiency at 1/2 load: 78.1 %Number of poles: 4Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): F

Others:Minimum efficiency index, MEI ≥: 0.45ErP status: EuP Standalone/Prod.Net weight: 47.1 kgGross weight: 53.7 kgShipping volume: 0.16 m³Danish VVS No.: 38 1826.030Norwegian NRF no.: 9043602

3/11

Printed from Grundfos Product Centre [2018.06.003]

On request TP 100-30/4 A-F-A-BQQE 50 HzH

[m]

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

Q [m³/h]0 5 10 15 20 25 30 35 40 45 50 55 60

eta[%]

0

20

40

60

80

100

TP 100-30/4, 3*400 V, 50Hz

P[W]

0

100

200

300

400

500

600

700

NPSH[m]

0

5

10

15

20

25

30

35P1

P2

4/11

Printed from Grundfos Product Centre [2018.06.003]

H[m]

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

Q [m³/h]0 10 20 30 40 50

eta[%]

0

20

40

60

80

100

TP 100-30/4, 3*400 V, 50Hz

P[W]

0

100

200

300

400

500

600

NPSH[m]

0

5

10

15

20

25

30

P1

P2

122

172

525

450

200

225

100

173 121

109 141173173

M16

RP 1/4

DIRECTION OF ROTATION

HIGH VOLTAGEDIRECTION OF ROTATION

LOW VOLTAGE

98.3

169L1

L2L3

L1L2

L3

Description ValueGeneral information:Product name: TP 100-30/4 A-F-A-BQQEProduct No: On requestEAN number: On requestTechnical:Rated flow: 46.1 m³/hRated head: 2.8 mHead max: 30 dmActual impeller diameter: 119 mmPrimary shaft seal: BQQECurve tolerance: ISO9906:2012 3BPump version: AModel: AMaterials:Pump housing: Cast iron

EN-JL1040ASTM A48-40 B

Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304

Material code: AInstallation:Range of ambient temperature: -30 .. 40 °CMaximum operating pressure: 10 barFlange standard: DINPipe connection: DN 100Pump inlet: DN 100Pump outlet: DN 100Pressure rating: PN 10(@) 450 mmFlange size for motor: FT100Connect code: FLiquid:Pumped liquid: WaterLiquid temperature range: -25 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³Electrical data:Motor type: 80ARated power - P2: 0.55 kWPower (P2) required by pump: 0.55 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 2.60/1.50 AStarting current: 430-470 %Cos phi - power factor: 0.79-0.70Rated speed: 1390-1410 rpmEfficiency: 70.0%Motor efficiency at full load: 70.0 %Motor efficiency at 3/4 load: 79 %Motor efficiency at 1/2 load: 78.1 %Number of poles: 4Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FMotor protec: NONEMotor No: 86805103Others:Minimum efficiency index, MEI ≥: 0.45ErP status: EuP Standalone/Prod.Net weight: 47.1 kgGross weight: 53.7 kgShipping volume: 0.16 m³Danish VVS No.: 38 1826.030Norwegian NRF no.: 9043602

450

225

100

173121

109141173173

M16

RP 1/4

5/11

Printed from Grundfos Product Centre [2018.06.003]

On request TP 100-30/4 A-F-A-BQQE 50 Hzcos phi

eta

0.0

0.2

0.4

0.6

0.8

P2 [kW]0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 0.65

I[A]

0.0

0.4

0.8

1.2

1.6

TP100-30/4 + 80A 0.55 kW 3*400 V, 50 Hz

eta

cos phi

I

n[rpm]

1000

1100

1200

1300

1400

P1[kW]

0.0

0.2

0.4

0.6

0.8n

P1

6/11

Printed from Grundfos Product Centre [2018.06.003]

On request TP 100-30/4 A-F-A-BQQE 50 Hz

Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.

122

172

525

450

200

225

100

173 121

109 141173173

M16

RP 1/4

7/11

Printed from Grundfos Product Centre [2018.06.003]

Exploded view

301a

219

92

7

7a

77

301a

92

11

9

51

100

49

105

45

215a

215

18

217215a

534a534

531531a

28

17

251d

251a

6

11b

66a

67

530530a

8/11

Printed from Grundfos Product Centre [2018.06.003]

Sectional drawing (TM058200 for TPE2,TPE3)

4

2 13

5

TM058200

9/11

Printed from Grundfos Product Centre [2018.06.003]

Exploded view ( TM057026 for MGE model H/I )

251d

251b

290

287277a

286

277

273a

273

268268a289a289

288b288288a

251a

252b

156c

159d

156b

156d188

275a

153

154

158

178

185

192

191

159e

156c 156

151152

266

187

291

293

252a

172

150

287a

502

273b

157

10/11

Printed from Grundfos Product Centre [2018.06.003]

Parts list TP 100-30/4, Product No. On requestValid from 20.6.2010 (1024)

Pos Description Annotation Données de classification Référence Quantité Unité+ Motor 1 pcs- Coupling cpl. 1 pcs

9 Hex socket head cap screw Designation: DIN 912 4Length (mm): 20Thread: M6

10 Shaft pin Diameter: 5 1Length (mm): 26

10a Coupling half 2- Motor stool cpl. 1 pcs

2 Motor stool 126 Hex head screw Length (mm): 25 8

Thread: M1028 Hex head screw 4

- Coupling guard cpl. 1 pcs7 Coupling guard 27a Pan head screw 4

- Shaft seal cpl. 1 pcs105 Shaft seal 1

- Shaft w/impeller cpl. 1 pcs49 Impeller 149b Split cone 149b Split cone nut 151 Shaft 1

- 6 Pump housing cpl. 1 pcs- 6 Pump housing cpl. 1

Pump housing 145 Neck ring 118 Air vent screw Thread: 1/4" 1 pcs19 Plug 2 pcs72a O-ring Diameter: 154 1 pcs

Material type: EPDMThickness: 4

11/11

Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date.

All information is copyright Grundfos.

info@lenntech.comhttps://www.lenntech.comtel. +31 152 610 900 fax. +31 152 616 289