gs01 equipment list electical- tcvp · 2018-09-12 · 7 1x 2 x 3/2-way solenoid valve with led,...

Lot REF.NO.

ITEM SPECIFICATION PICTURE Preferred brand UNIT TotalQUANT.

Fundamentals of refrigeration system.

- Basic expansion devices.

- Charging and evacuation techniques.

- Electrical components and circuits.

- Control devices and circuit.

- Capillary operation of the unit.

- Thermostatic operation of the unit.

- Oversized thermostatic operation of the unit.

- Evaporator "No frost" load change by cap

tube.

- Evaporator "Roll band" load change by cap

tube.

- Evaporator "No frost" load change by

thermostatic.

- Evaporator "Roll band" load change by

thermostatic.

- Condenser heat convection changes.

- Trouble shooting.

- Air conditioning cooling effect.

ບດົສະຫຼູບ

ສາທາລະນະລດັ ປະຊາທປິະໄຕ ປະຊາຊນົລາວ

ລາຍການອູປະກອນ ປະກອບເຂົາ້ໃນການຮຽນ-ການສອນ ໃນສາຂາ ໄຟຟາ້ເຕກັນກິ ສະເໜຕີໍ່ໂຄງການ SSTVET ວທິະຍາໄລເຕກັນກິແຂວງວຽງຈນັ ມດີັ່ ງນີ:້

1 Refrigeration Training set Set 2

ສນັຕພິາບ ເອກະລາດ ປະຊາທປິະໄຕ ເອກະພາບ ວດັທະນະຖາວອນ

==000==

of 20

Technical specification

The trainer shall display the typical installation

of refrigeration

piping and electrical circuits. The trainer shall

be based on

a dismantled and modified common

refrigerator, equipped with

low and high pressure control switches. The

trainer shall allow

students to praxis the cabling of all in a

common refrigerator

circuits using 4 mm safety plugs as well as

charging and

evacuation techniques.

The trainer shall be supplied as mobile unit on

an experiment

table. Dimensions approximately:W 1500, H

1800, D 700 mm.

The table size 800 x 1,500 x 750 mm.

2ຊຸດເຄື່ ອງປັບອາກາດ(Air conditioning

training set )

ຊຸດເຄື່ ອງປັບອາກາດ 12,000Btu ຊຸດແວນເບິ່ ງນໍາ້ຢາ,

ຊຸດເພາົເວແີຟກເຕ,ີ ຊຸດແຝງຈາໍລອງ, ໃຊໄ້ຟ 1 ເຟສ 220

VAC 50 Hz, ຂະໜາດ (WxHxD)

900x2400x1100 ມມ

Set 3

of 20

3ຊຸດຝຶກການເຕີມນໍ ້ າຢາເຄື່ ອງທໍາຄວາມເຢັນ

ແລະ ເຄື່ ອງປັບອາກາດ(Freezer and Air conditioner Refringerant training set)

ຊຸດຄອມເຟດເຊີ , ຊຸດຄອນເດັນເຊີ , ຊຸດເກວັດຄວາມດັນ, ຊຸດຄວບຄຸມອຸນນະພູມ, ຊຸດເຕີມນໍ ້ າຢາແອ, ໃຊ້ໄຟ 1 ເຟສ 220 50 Hz, ຂະໜາດເຟມ (WxHxD) 1450x730x160 ມມ

Set 2

4 ເຄື່ ອງດູດອາກາດ(ເຄື່ ອງແວກຄວັມ) 680x425-31 jpg 6

5 ຕູເ້ກບັເຄື່ ອງມຊື່າງມລີໍເ້ລື່ ອນ 424 × 396 Set 15

6

ຊຸດທດົລອງ

ລະບບົເຄື່ ອງເຢັນອຸດສາຫະກາໍ

(Industry Air conditioner)

Set 2

of 20

7 Laboratory Workbench

Mobile laboratory workbenchMobile workstation system with profile plate that can be used on both sides (1100 mm) and ER mounting frame. Type: With 1100 x 700 mm profile plate and ER frame

Festo or Equivalent brand set 1

8 Drawer unit

Fixed drawer unit for installation in mobile workstationsFixed drawer unit with three lockable steel drawers, fully extendable and with safety stop.Type: Fixed drawer unit for hydraulics (3 drawers)


9 Power Supply Unit

Power supply unit for mounting frame

Please select:US, CA, Central America, BR, CO, EC, KR, TW, TH, Input voltage: 85 – 265 V AC (47 – 63 Hz)Output voltage: 24 V DC, short-circuit-proofOutput current: max. 4 A Dimensions: 170 x 240 x 92 mm


10 Safety Connector Cables

Conn. cable set

Complete set, consisting of 98 safety laboratory cables with 4 mm safety plugs in the colours red and blue:• - 10x red 50 mm• - 10x blue 50 mm• - 26x red 300 mm• - 11x blue 300 mm• - 21x red 500 mm• - 12x blue 500 mm• - 3x red 1000 mm• - 3x blue 1000 mm• - 1x red 1500 mm• - 1x blue 1500 mm• Plugs with rigid protective sleeve and axial socket• Conductor cross section: 1 mm2• 1000 V CAT II• Rated current: 16 A167091


of 20

11 Cable guide

Retainer

Cable guideFor a set of laboratory cables. Ensures that cables are kept neatly and in order. W 150 x D 136 x H 63.


Equipment set TP 101 – Basic level Basic pneumatics trainingThe number of components and the design are specially tailored to the projects contained in the workbook so that the main fundamentals can be imparted with little outlay. Delivered in practical, Systainer-compatible equipment trays.

1 2x 3/2-way valve with pushbutton actuator, normally closed 1528602 1x 3/2-way valve with pushbutton actuator, normally open 1528613 1x 5/2-way valve with selector switch 1528624 1x 3/2-way valve with selector switch, normally closed 1528635 2x 3/2-way roller lever valve, normally closed 1528666 2x Proximity sensor, pneumatic, with cylinder attachment 27648157 1x Pneumatic timer, normally closed 5406948 1x Pressure sequence valve 1528849 1x 3/2-way valve, pneumatically actuated at one end 576302

1

10 1x 5/2-way valve, pneumatically actuated at one end 57630711 3x 5/2-way double pilot valve, pneumatically actuated at both ends 57630312 1x Shuttle valve (OR) 53977113 2x Dual-pressure valve (AND) 53977014 1x Quick-exhaust valve 53977215 2x One-way flow control valve 19396716 1x Single-acting cylinder 15288717 1x Double-acting cylinder 15288818 1x Start-up valve with filter control valve 54069119 1x Pressure regulator valve with gauge 53975620 2x Pressure gauge 15286521 1x Manifold 15289622 2x Plastic tubing, 4 x 0.75 silver 10 m

12 Equipment Set for Basic Pneumatics Training

Festo or Equivalent brand set

of 20

13 Workbook in Basic PneumaticsWorkbook Equipment set TP 101 – Basic level Basic pneumatics training541088


14

Complete supplementary equipment set TP 101 – TP 201 Basic electropneumatics trainingElectropneumatics, Basic level.

1 1x Signal input, electrical 1622422 2x Relay, three-fold 1622413 1x Limit switch, electrical, left-actuated 1833224 1x Limit switch, electrical, right-actuated 1833455 1x Proximity sensor, optical, M12 5727446 2x Proximity sensor, electronic, with cylinder mounting 23447527 1x 2 x 3/2-way solenoid valve with LED, normally closed 5671988 1x 5/2-way solenoid valve with LED 5671999 2x 5/2-way double solenoid valve with LED 56720010 1x Pressure sensor with display 57274511 2x One-way flow control valve 19396713 1x Double-acting cylinder 152888


15 Workbook in Basic Electropneumatics Workbook 201 Basic electropneumatics training Festo or Equivalent brand 1

16 Set of Posters for Pneumatics

Everything that you need to know: 5 posters on pneumaticsNow the updated version of the popular A1 poster is supplied rolled up, quickly providing a comprehensive overview. All symbols and terminology correspond to the current standards ISO 1219-1 and DIN/EN 61346-2.Subjects on the poster:• Electrical, pneumatic and logic symbols• Systematic control diagram of a pneumatic control system• Electrical and electropneumatic components• Pneumatic – Directional control, stop and pressure control valves• Pneumatic – Power components


of 20

17 Set of Cutaway Pneumatic Models

Case of cutaway pneumatic modelsFor visualising the structure and function of pneumatic components.All of the cutaway models used are of industrial design. Dynamic elements and wearing parts correspond to the original. The models selected are those relevant to pneumatic training. Some of the cutaway models retain their function or partial function so that they can be demonstrated in use.The following components are included in a case of cutaway models:• Single and double-acting cylinders• Filter regulator• AND gate• OR gate• Delay valve• Quick-exhaust valve• Valve slice• Pressure gauge• Roller lever valve• Pressure sequence valve• Pneumatic valve• One-way flow control valve


18 Air Compressor

• Air compressor 220 V, 60 Hz (LV)• This quiet device is well suited for classroom and school ¬laboratories. The circulator pump is available in different variants depending on AC power network voltages and -frequencies.Pressure: 800 kPa (120 psi) Pmax220 V, 60 Hz• Performance: 42.5 l/min• Reservoir capacity: 15.1 l


19 LOGO Logic Controller

EduTrainer® Compact preferred version with LOGO! 8LOGO! EduTrainer® CompactCompact trainer devices that provide users with an introduction to logical signal processing within a mini control system.Features of LOGO! modules:LOGO! 12/24 RCE (V8)With LOGO! 8 the successful Siemens logic module enters the next generation.EduTrainer® Compact with:LOGO! 8• Basic functional module 12/24 RCE8 digital inputs4 relay outputs• DM8 extension module:4 digital inputs4 relay outputs


of 20

20 PLC Controller

EduTrainer® Compact Preferred versions with SIMATIC S7-1214C (ER2/19”DIO-A-SL)*The modular mini control system from SiemensFor solutions in discrete and stand-alone automation applications in the lower performance range. The family of SIMATIC S7-1200 controllers is equipped with an integrated engineering system: SIMATIC STEP 7 Basic for controller and HMI.EduTrainer® Compact with:CPU S7-1214C• 50 kB RAM, 2 MB loading buffer• Interface: RJ45Inputs/outputs:• 14 digital inputs (24 V DC)• 10 digital outputs (24 V DC, 500 mA)• 2 analog inputs, 10 bit (0 – 10 V)CPU module: SB 1232 AQ analog output• AO 1 x 12 Bit (± 10 V DC, 0 – 20 mA)


21 HMI Touch Screen Training Kit

Programmable Terminal Desktop Training Kit. It is specially designed for the program terminal self-study.This Training Kit offers and easy operation with software and can be connected with the PLC in real working environment.

Touch Screen Training Kit Includes:- Display type 3.5-inch TFT color Number of dots (H x V) 320 ×240 dots Display colors 65,536 colors- Included Switch ON/OFF 220VAC RS232C connecting PLC

Series set 4

22 Inverter Training set

Inverter Includes :- Multi-function Compact InverterMX2-Series V1 type Rated input voltage:1-phase 200 V to 240 V, 50/60 Applicable motor capacity:0.4Kw(1/2 HP) Rated output voltage: 3-phase 200 to 240 V (The output cannot exceed the incoming voltage).- 3 Phase Induction Motor Output Power 0.37kW. ½ HP 4 Pole Rated Speed 1,450 r/min.- Incremental 40-mm-dia. Rotary Encoder Power supply voltage 12-24 VDC PNP open-collector Output - Terminal f4mm. for connecting Inverter I/O signal

This training kit can use stand alone or Recommended to use with PLC training would be recommended to use together.

Series set 2

of 20

23 ຄອມພວິເຕ ີPC + ໂຕະຕັ່ ງDell Inspiron One 2330 ( Core

i7, Ram 8GB, HDD 2TB )Dell I Set 60

24 ເຄື່ ອງສາຍໂປເຈກເຕຕີ VPL-DW122 270 × 200 - 21jpeg SONY Set 4

25 Tv 64ນີວ້ LG Set 2

26 ຊຸດຝຶກແສງສະຫວ່າງ

ຊຸດກໂິລວດັອາວມເີຕ,ີ ຊຸດສະວກິທດົລອງ, ຊຸດຫຼອດໄຟ,

ຊຸດເບກເກ,ີ MCB, LECB, ໄຟຟາ້ 1 ເຟສ 50 Hz,

ໃຊໄ້ຟ 220V 50 Hz ຂະໜາດ

(WxHxD)1200x7100x200ມມ

Set 3

of 20

27 ຊຸດຝຶກໄຟຟາ້ໃນອາຄານ

ແຝງຄວບຄຸມລະບບົໄຟຟາ້, ແຝງກໂິລວດັມເີຕ,ີ ແຝງ

ຫຼອດໄຟ, ແຝງເຊື່ ອມຕໍ່, ຊຸດແຫຼງຈ່າຍໄຟ (WxHxD)

1500x2100x220ມມ

Set 3

28 Alarm system Training Technology

Equipment List (Panel system)- 1 x Fire Alarm Control Panel (FCP)- 1 x Heat Detector- 1 x Heat Detector- 1 x Photo Electric Smoke Detector- 1 x Manual Station- 1 x Moveable Detector 220VAC- 1 x Limit Switch Senser- 1 x Magnet switch sensor- 1 x Alarm Bell- 1 x Signal Lamp 220VAC- 1 x Experimental Manual

Set 2

29

Electrical Installation Technology

Training Topics :

- ON OF switch, one way switch and socket outlet

- Lamp switching system and socket outlet

- Two way switch system

- Impulse relay system

- Staircase time relay system

- Moving coil system

- Fluorescent lamp circuits

- Wiring circuits in lighting system

Technical specification

The supplier shall provide and mount 5 installation cabins,

The mountable frame structure shall be made

square steel (45x45x3 mm) steel anti rust painted, fixed

by

bolds. Walls and ceiling shall be made of 15 mm strong

plywood panels.

Electricity Internal Building Training set Set 1 of 20

30

Material and Equipment List :

- 3 x VAF-G cable 1,5mm2, 100 m

- 3 x VAF-G cable 2,5mm2, 100 m

- 9 x THW cable 1,5mm2, 100 m

- 9 x THW cable 2,5mm2, 100 m

- 60 x PVC wire duct 19x11 mm, length 2.9 m



- 60 x PVC Pipe OD 16mm, length 2.9 m



31 ເຄື່ ອງຂດົທໍ່ Pipe fitting Equipment pipe Bendin Set 2

Electricity Internal Building Training set Set 1

of 20

32

ສະຫວານໄຟຟາ້ ແບບໃຊຖ້່ານ

(Cordless drill for Electrical installation)ລຸນ້ GSB 1080-2-410,8V

HAKKO Set 6

Switch Board Training Set (Control Motor)

Training Topics :- Push Button switch system- Magnetic contactor- Limit switch system- Terminal overload relay system- Direct reversing motor 3 phase- Direct start 3 Phase Motor- Reversing 1 phase motor- Auto reversing 3 phase motor- Manual sequence control by timer- Auto sequence control by timer- Star Delta manual- Star Delta Auto- Start Stop Control 3 Phase Motor with bush button

Technical specificationThe Training Cabinet shall enable the students gaining knowledge in control technology using various types of electrical contactor circuits. All accessories shall be mountedin powder coated steel cabinets; 4mm safety sockets shall beprepared on the door for wiring the devices.

All devices shall be labeled on the front plate applying international symbols (ECE). Teacher and student handouts shall be supplied in Thai language.

Set 1

of 20

Dimension cabinet box approx: 800x500x50x100mm.orNew model (EMC-03A-B) 1 set consis of

Electromagnetic Motor Control training Dimension cabinet box approx: 700x500x75x175mmMaterial and Equipment List for model EMC-03A :- 1 x Power supply, 380 V, 5 pole CEE plug and 5m of VCF cable 5 x 2.5 sq.mm.- 2 x Main Contactor 3 Pole Aux. - 2 NO 2 NC 5, 5 KW- 1 x Overload Relay (bimetal)- 1 x Timer relay 230V 0-30 sec.- 3 x Push Button Switch ;green, red, yellow- 1 x Emergency Switch- 3 x Pilot LED Lamp: red, yellow, blue- 1 x Pilot LED Lamp: green or yellow- 1 x Selector Switch ON-OFF-ON- 1 x MCB 10A 3P- 1 x MCB 6A 1P- 1 x Siren 230V- 2 x Lomit switch 1N.O./ 1N.C. 10A

Electromagnetic Motor Control training;Di i bi t b 700 500 75 175- 1 x Timer relay 230V 0-30 sec.- 3 x Push Button Switch green red yellow- 1 x Emergency Switch- 1 x Main Switch 3 Pole 16A- 3 x Pilot LED Lamp: red, yellow, blue - 1 x Pilot LED Lamp: green or yellow- 1 x Selector Switch ON-OFF-ON- 1 x MCB 10A 3P- 1 x MCB 6A 1P- 3 x Motor 3 phase 380/660V, 50Hz, 4P, 1HP- 3 x Motor 1 phase, 230V, 50Hz, 1/4 HP- 2 x Table W 1500 x D 800 x H 750 mm.

33

of 20

34

ຊຸດທດົລອງໂມເຕີໄ້ຟຟາ້ ກະແສກງົ

(EXPERIMENTAL PANEL DC

MACHINES)

cabinet box approx: 800x500x50x100mm.orNew model (EMC-03A-B) 1 set consis of- 3 x Pilot LED Lamp: red, yellow, blue 12-24Vdc- 3 x Pilot LED Lamp: green or yellow 12-24Vdc- 1 x Selector Switch ON-OFF-ONMaterial and Equipment List for model EMC-03B :- 1 x Power supply, 220 V/12-24Vdc, 2 pole CEE plug and 5m of VCF cable 2 x 2.5 sq.mm.

Set 2

35 Appliances Training Set

setsHome appliance trainer the function operating principle

and fautt finding in circuit diagramDimension of table: (800x600x750mm);

Installation type: Model is put on table steel tube and anodized

with translucent white sand; Model is peeled the parts of

the device to see main features and structure of device

Set 1

36 ເຄື່ ອງຈອດປັບຄວາມຮອ້ນໄດ ້

1. The use of anti-static design to prevent

damage to the SMD components

2. Handle using double-sided PCB circuit

board design to prevent poor contact,

longer life

Set 6

of 20

37 ເຄື່ ອງດູດກົ່ ວ

1. ຍີ່ ຫໍ່ HAKKO ຮຸ່ນ NO DSO1P

2. ຄວາມຍາວ 33 Cm

3. ສຟີາ້Set 30

38 ຊຸດຝຶກທດົສອບໂຫຼດສໍາຫຼບັໂມເຕີ

ຊຸດໂມເຕອີນິດກັຊນັ 3 ເຟສ, ຊຸດ Control break

Unit, ແຝງເຜາົເວແີຝກເຕ,ີ ຊຸດ Brak Unit, ໃຊໄ້ຟ 3

ເຟສ 380V 50Hz ຂະໜາດເຟມ (WxHxD)

1250x405x160ມມ

Set 3

39 ຊຸດຝຶກອນິເວເີຕີ

ຊຸດອນິເວເີຕ,ີ ຊຸດໂມເຕ ີ3 ເຟສ, ຊຸດແຝງວງົຈອນເຊື່ ອມ

ຕໍ່ທດົລອງ, ໃຊໄ້ຟ 1 ເຟສ 220 VAC 50Hz ຂະໜ

າດເຟມ (WxHxD) 380x140x310ມມ

Set 5

40 ຊຸດທດົລອງສະໜາມແມ່ເຫຼກັ Model 0545-001 Set 4

of 20

41 ຊຸດຈາໍລອງMotor 3 P 2hp , 380V Set 2

Course concerning the connection methods and the recordingof characteristics for electric motors and generators.With the integrated machine test system, a multitude ofexperiments can be carried out, e.g. the recording of torque,power and current-locus curves.

Topics:- Forces in a magnetic field- Measurement of Lorentz force- Drives- Torque-speed characteristic- Machine test system- DC machines

Set 3

of 20

Speed and induced voltage with DC machines- Torque and armature voltage with DC machines- Torque and excitation voltage with DC machines- DC machines with external excitation- Reversible of direction- Characteristics with variable armature voltage- Characteristics with variable excitation voltage- Shunt-wound DC machines- Characteristics with variable operating voltage- Series-wound DC machines- Reversal of direction with DC machines- Characteristics with variable operating voltage- Generator operation of DC machines- Drive and generator with a resistive load- Power output of generator- Rotating field (three-phase) machines

43 Oscilloscope DS11OZD PC 10

44

ເຄື່ ອງວດັແທກ RLC

(RCL Metter)

1. ຄວາມລະອຽດຂອງການສະແດງຜນົ 20,000/2,000

2. ຄວາມຖີ່ 100/120Hz/1/10/100kHz

3. ໂໜດເລອືກອຸປະກອນວດັແທກ RLC ອດັຕະໂນມດັ

4. ຄວາມແນ່ນອນໃນການວດັແທກ0.2%

5.ຕວົກາໍນດົການມາດຕະການ L, C, R, D, Q, ESR,

θ, DCR

PC 10

42 Electrical Machines I

of 20

45

ເຄື່ ອງວດັແທກໄຟຟາ້ລວມ ແບບດຈິຕິ໋ອນ

(Digital Multi tester)

1. Brand : GENEC "U.K."

2. Model : ESRT81B

3. ສາມາດວດັແທກ DCV, ACV, DCI, ACI

4. Capacitacnce, Ω, Hz, Scope mete

PC 10

46

ເຄື່ ອງວດັແທກກາໍລງັໄຟຟາ້ (ວດັມເີຕີ)້ 1 ເຟສ

Single Phase

(Power meter for single phase )

1. AC / DC VOLTAGE

ຊ່ວງການວດັແທກ 0.01 ເຖງິ 99.99V / 100.0 ເຖງິ 600V

Resolution 0.01V / 0.1V

Accuracy ACV : ± (1 % + 5d ),DCV : ± (0.8 %+5d)

/ ACV : ± (1 %+5d) , DCV : ± (0.8 %+5d)

2. WATT ( true power )

ຊ່ວງການວດັແທກ 1000W / 1001 ເຖງິ2500W

Resolution 0.1W / 1W

Accuracy ± (1.5 % + 5d )

3. V, A ( true rms )

ຊ່ວງການວດັແທກ ACV 250V / ACA 10A

Resolution 0.01V, 0.1V / 0.001A, 0.01A

Accuracy ± ± (1 % + 5d ) / ± (1 % + 3d )

PC 10

47 DC Powersupply ຍີ່ ຫໍ ້BK Precision 0-24V DC 10A PC 4

48 ເຄື່ ອງທດົລອງ ໄມໂຄຄອນໂທເລ ີ+ software PIC16F877 set 30

of 20

49 ຊຸດທດົລອງ digital + ພອ້ມອຸປະກອນ DTT - 1 set 15

50 CP-PIC Training

CPU MICROCONTROLLER PIC16F877

Integreated hardware and Software

Training content :

· Hardware and software of PIC16F877

· Assembly and Basic language of PIC

· LCD Module Experimens

· Stepping motor Experiment

· Analog to Digital Converter of CPU PIC

· Keyboard scan Program Experiment

set 30

51 ເຄື່ ອງມຕືໍ່ທໍ່ທອງແດງ Lokring

L14000878 - LOKPREP 65G 15

mlLR139002 - Tooling/Fitting Tool

BoxL14000005 - Capillary Tube

CutterCALIPER6 - 6" Digital Caliper

Set 2

52 SOLA POWER TRAINING SYSTEM MODEL:CPE-S25 Festo set 2

of 20

53ຊຸດກງັຫນັນໍາ້ຜະລດິໄຟຟາ້

(Hydro power plant trainer)set 2

ຫວົໜາ້ກມົອາຊວິະສກຶສາ ຜູອ້ໍານວຍການ ຊ່ຽວຊານຕ່າງປະເທດ ຊ່ຽວຊານພາຍໃນ ຫວົໜາ້ພາກວຊິາໄຟຟາ້

of 20

gs01 equipment list electical- tcvp · 2018-09-12 · 7 1x 2 x 3/2-way solenoid valve with led,...

Documents