guide: deep surf magazine_2013 board buyers guide

www.DEEPZINE.com 29

2013 BOARD BUYERS GUIDE

PHOTO: JIM M

ARTIN

30 DEEP SURF MAGAZINE October 2013 www.DEEPZINE.com 31

Tri-County Shapers Symposium

Bill “Blinky” Hubina

WILLIAM DENNIS SURFBOARDS BY SHAWN TRACHT

Rick Avant

ANCIENT ART SURFBOARDSBY DANIEL KURAS

Blinky back in the day.

Brian Joseph putting an Ancient Art

through the paces.

PHOTO: KURAS

PHOT

O: SU

BMIT

TED

PHOTO: SUBMITTED

Since 2009 we have profiled a shaper from each of the tri-counties (Ventura to San Luis Obispo) to highlight the wealth of talent and prowess that the shapers of the Central Coast bring to surfing. This year, our list includes Ventura's Bill "Blinky" Hubina, Goleta's John Perry, and San Luis Obispo's Rick Avant. They have all created their own paths into the shaping world, and all make surf crafts that accentuate the passion of their souls.

John Perry

JVP SURFBOARDS BY SHAWN TRACHT

Perry testing his craftsmanship.

www.DEEPZINE.com 31

VENTURA

SAN LUIS OBISPO

SANTA BARBARA

The ManBill “Blinky” Hubina is a fired up, stoked grommet residing in a veteran surfer/shaper's body.

Every time I call Hubina or go by his Ventura Surf Shop, I feel like we’re just a couple of teens wandering around the shop frothing over surfboards and surf products. Supreme stoke runs through this veteran surf legend, and he shared his story with me of a young surfer turned life long surf guru and legend.

Through TimeThe hands that shape a surfboard have been somewhere, both through time, and the eons

of foam dust. For Hubina, that all started in 1959 when he got interested in surfing after helping a friend build a board from a kit in Surfer Magazine. From what he told me, that first board was pretty ugly, but the boys got a few laughs when they took it to Malibu. In 1961, he got his first board, a 9’6” Tiki. In 1962, he got his first “real board,” as he put it, a 10’3” Tom Hale.

As we look back, it’s exciting to see how much a part of the surfing family tree Hubina is. In 1964, Hubina became Morey-Pope’s first employee. In 1965, he invented Slip Check, which Delaney named. It was the first wax replacement and was soon on every surfboard across the country.

In 1967 Hubina started William Dennis Surfboards with Dennis Ryder. He remembers meeting Bob McTavish at Rincon and being the only ones out on shorter boards. Hubina was riding a 7’11” he had made out of a cut off blank, and McTavish was riding a 7’9” V bottom. McTavish worked with Hubina at William Dennis shaping his orders. George Greenough worked on his waterproof camera housing, kneeboard, and flex fins. Between McTavish's and Hubina’s orders, along with his Slip Check royalties, Hubina was able to buy his first 55-gallon drum of resin.

As far as Hubina’s skill set in the shaping bay, he noted that he learned most of his board

Character and Life Courageous optimism and a strong belief in the big guy upstairs make up the meta-data

of John Perry (JP) and his wonderful family in Goleta. Yes, JP makes highly refined, great surf sticks. Yes, JP has been shaping for over 40 years. Yes, JP can be considered a true craftsman of our sport. Yet, JP hasn’t become a well-known part of the shaping community and conversation for his shaping alone. A depth of character and life experience is poured into each hand-crafted board.

The HistoryJP got interested in surfing through his older brother, Tom, in the mid-1960s when it took

two guys to carry a board. His earliest impressions of surfing and surfboards were Malibu, Stables (C-Street) and uncrowded Rincon. Surfing back then kind of reminds JP of the surfing happening right now; there are many varieties of shapes being surfed: eggs, reverse tear drops

and a host of down rail guns and mini guns. Each shape is just a lot more refined today.In the 1970s JP took a hiatus for several years surfing around the world. He traveled from

Europe to Africa, through the Indian Ocean, then back to Mainland USA through Hawaii. Most of his best surfing and board knowledge came from South Africa at Jeffreys Bay, where surfboards are put to the test.

When JP came back from his surfing travels, he started Ocean Rhythms Santa Barbara, where he entertained a host of great shapers under one roof: Matt Moore, Peter White from Australia, Joe Blair of Hawaii, Art Collier of San Diego and Steve Huerta of Ventura, just to name a few.

In the 1980s JP and his wife Liz started their family with their son, Blair, and daughter, Jaclyn. In the early 1990s he changed careers to bring in a steady income for the family.

Several years ago, JP returned to his passion of surfboard building and designing with

From necessity comes creativity… Such is the case for shaper Rick Avant of Ancient Art Surfboards. His fruitless search for a

unique surf craftsman forced him to take on the challenge himself and set out to create the boards he was having such a difficult time finding. Avant saw a need in the surfboard market for a shaper that was willing to take a risk in his craft. “I was riding single fin surfboards that I felt needed to be pushed progressively but when I asked my shapers, they were either not sure about my requests or unwilling to take on the challenge,” he recalled. “That’s when I decided to start making boards myself. It provided me the opportunity to implement all my ideas and influences into my own creations and finally get a surfboard exactly how I wanted it.”

With a background rooted in boat building and a current career as a marine surveyor, Avant relies heavily on his ocean vessel influences when it comes to his board building. Taking from the practices of Herreshoff Boat Designs, Avant builds all his boards with the thought of obtaining

the “sweet line” and creating a surfboard that is functional yet pleasing to the eye. “More often than not, if it looks good it will ride well,” said Avant.

Trial and ErrorNestled deep in Chumash country, miles behind Lopez Lake, the trip out to the Ancient Art

compound feels like going back in time. A place where cell phone reception is lost and horses share the road is where Rick Avant calls home. Upon arrival, one is greeted with numerous masterpieces in progress from customized Hobie Cats to a pieced together mini half-pipe, from a gutted ’49 Hudson to the blanks and boards strewn throughout the shaping bay. Avant is a man of ideas. “I’ll be the first to admit that not all my boards work; I am willing to fail. It’s all about trial and error; you don’t know what will work until you actually try it.”

— continued


the encouragement from his dear friends. “This time around, I am determined to have some serious fun! There is nothing like sharing your passion with others where you can work together and generate some keen shapes, accomplishing your surfboard goals and friendships far better than if you had been on your own. I guess you could say my surfboard prowess started way back then. It is even more exciting today, the second time around. No pressures, no competition. Just shape, ride, and have some serious fun! When I am shaping, the sounds of rock and roll are playing in the background. Hopefully in each board, a vibe or two is instilled,” said JP.

The Variegated Landscape of a SurfboardIn 2004, a tragedy occurred for the Perry family. Their son, Blair, was taken from the family

through an accident. “Fortunately, our faith in Jesus Christ and the love and support of our community has carried us through to this very day,” said JP.

building skills from Bob Cooper when they worked together at Morey-Pope. “I couldn’t have had a better mentor,” said Hubina.

Hubina was also glued up a blank for John Peck. It was the first surfboard Peck ever shaped, which turned out to be the Peck Penetrator. He also helped Morey-Pope build the Trysect. He took one he had just finished glassing and went surfing the Tanks with Duke Kahanamoku, Paul Strauch and Fred Hemmings Jr. just to show them how it worked. They were there to promote the Duke Kahanamoku model board that VIP was making and had come by the shop to hang out.

Hubina opened his first showroom in the front of a house on Thompson Boulevard in Ventura in 1968, just one block from the Morey-Pope shop. He lived in the back with his brother Bob and glassed boards in the garage. He traded boards for beer with one of his friends whose dad owned a distributorship. His brother had his mattress on top of 40 to 60

There is such a special sense and feeling of Blair’s goodness when you visit JP. It’s not the first thing JP brings up, and in many cases he doesn’t. However, JP shares his passion about life and his strong closeness to God as part of the entire experience of, as he puts it, “entering into this journey of riding a wave together.”

To me, JP is a teacher, sort of a father, even though I have a close relationship with my own. He’s the first to express his miscues as a human being, but his authenticity as a human being is where I gain trust and respect in him. He’s shared some intense moments with me, one in particular when Blair came to him in spirit when he was out for a surf after the accident. My heart breaks when I hear the story, but JP’s strength gives me strength. He helps me understand the oneness we all share, and he shows me through his stories what courage and trust in a higher power really means.

When you order a surfboard, you think you’re just showing up to some shaper's house to purchase a new shape and see how it goes, but this is not the case. All shapers have their story,

It is this type of thinking that has led Avant to successful new concepts such as the flying “A” stringer and the hydro spherical concave. The flying “A” stringer is a split stringer that through triangular force creates added strength to the surfboard while also allowing flex on the rails and in the tail, which builds up a stored energy that helps the surfboard accelerate as it releases out of turns. With a current line of boards he calls Avant Garde Creations, Rick has created a unique quiver of surfboards that includes his take on the noserider, pig, single fin shortboard and fish. While willing to take on a custom order, Avant is not always eager to stray from his tried and true; “If someone wants a custom flying “A” single fin shortboard, I would be more than happy to work with them in creating the

PHOTO: TRACHT

Bill "Blinky" HubinaTri-County Shapers Symposium

Rick Avant

PHOT

O: KU

RAS

www.DEEPZINE.com 33

cases of beer. As Hubina puts it, “Things were good.”In 1971, Hubina took over the Morey-Pope shop on Front Street in Ventura when Tom Morey

went to Hawaii and invented the Boogie Board. Karl Pope started a new surfboard business called Wave.

In 1972 Hubina shaped the first threer plugs used to make the molds for Karl Pope at Wave. From 1970 to 1980, Hubina shaped and glossed. He had the salesroom and glassing on Front Street with 10 to 15 employees and made 30 to 50 boards a week. He had boards at six different shops: Steve Bigler’s shop in La Jolla, Val Surf, a shop he had partners with on Hermosa Beach Blvd., Glenn Kennedy’s shop on Topanga Boulevard, Bruce Fowler’s shop in Goleta, and one in Santa Barbara.

Hubina sold Ventura Surf Shop to Stan Fuji in 1980 and became the state park concessioner at the pier in Ventura. However, in 2000, he bought back the

surf shop from Fuji with one of his best friends, Mark Ellison, and has been back ever since.

The Surfboard It is easy to see how Hubina became so skilled in building surfboards. To this day, he still

shapes regularly and has a few surfboard models that are standouts along the Central Coast. One in particular is his Mega Fish, which is the ultimate molding of what he learned in the past mixed with todays high performance surfboards. The Mega Fish is a four-fin longboard also mixed with high performance characteristics that let you nose ride and pull into slab barrels.

The Mega Fish brings us full circle, because without the knowledge of the beginnings mixed with a lifetime in the surfing industry, we wouldn’t understand how the hands of this shaper continue to carve a path into a legend. Ventura Surf Shop • (805) 643-1062 • 88 E. Thompson Blvd., Ventura

and that story influences them as a human being and in the shapes they revel in designing.

JP’s shapes for me, and I own two of them, The Threedom and The Shrimp, carry multiple layers of complexity within them. They are a variegated landscape of JP’s learning from the past; they carry what riding a wave means to him, and they carry his entire story, his journey of being broken by life, and having the faith in God to never give up and never stop believing that life is good and people are good. All this in boards that carve smooth transitioning lines and bank Chris Brown wrap-around roundhouse cutbacks high off the foam ball.

I came to JP last year looking for a surfboard, I left finding a true friend, a shaper, and a hero.JVP Surfboards • www.jvpsurfboards.com • (805) 637-5100

board they want, but if someone is looking for the typical thruster potato chip shortboard, they’re going to have to look somewhere else. We have a few really good shortboard shapers here on the Central Coast who would be more than happy to shape one for you. I just won’t do those.”

Learning to RideA historian of surfing, Avant continuously looks to educate himself and others on our

beloved sport’s past. With a collection of team riders he lovingly refers to as the “Hi-mountain Hell raisers,” Avant has found a way to provide both boards and education to a group of young, upcoming surfers. Taking them under his wing, Avant involves his riders in all areas of the board building process, teaching and explaining the entire way. He explained, “I want there to be an

understanding as to why the board is the way it is. Everything about my boards is there for a reason. There is a lot of history and ideas that go into each of my surfboards, and I want the rider to know that”.

When one orders a board from Ancient Art Surfboards they will not only come away with a unique surf craft but also an education.

Having recently opened a small showroom in the village of Arroyo Grande aptly named The Board Box, Avant now has a place to talk history and sell surfboards. Though the shop is just starting out, Avant’s hope is to have a home to showcase his newest line of surfboards and provide a place for curious surfers to come and find a board that strays from the norm. Ancient Art Surfboards • (805) 489-2177 • [email protected]

John Perry

PHOTO: PAUL GREENE


The Mutant5’10” x 19 ¾” x 2 7/16” Tail: Winged SwallowFin setup: Comes standard with 5 fin option to be ridden as a Twin, Thruster, Quad, and Quad + NubIdeal wave size: Ankle to ShoulderIt’s Alive!!! The Mutant is a small wave groveler that gives you tons of down the line speed with great control for crazy high speed turns.Construction comes in: pu/poly, EPS/Epoxy, Hydro flex natural, Hydro flex super charger, EPS InCide Epoxy, & RFT.

Black Punt5’10” x 15 ¾” x 2 ¼” Tail: Squash, custom options availableFin setup: Comes standard as a tri-fin but can be ordered as a five fin convertible.Ideal wave size: Waist to OverheadThe Black Punt is a perfect board for today’s high performance surfing. The rail profile and board outline lets you size the Black Punt 2-inches shorter than your previous shortboards. Construction comes in: pu/poly, EPS/Epoxy, Hydro flex natural, Hydro flex super charger, EPS InCide Epoxy, & RFT.

WILLIAM-DENNIS SURFBOARDS Shaped by Bill “Blinky” Hubina

Pro Quad Comp9’3” x 22 5/8” x 3” 7’ tip to tip swallow tail. Hook bottom with double barrel concave from tail 1/3 length of board, flat V last 12” of tail turned down hard, 3/16” concave in nose. Great board in any kind of surf, excellent contest board with quick turns lots of speed and great noseriding.

EggThe Bonzer Egg has evolved from the Eggs of the early '70s. We make a wide range of them using mostly the 5-fin set up. They will work in many types of waves. Bonzer Eggs utilize round, diamond and squash tails.Recommended size: 5’10” x 19 ¾” x 2 3/8” to 8’0” x 22 ½” x 3”

Octafish Bonzer 5The Octafish is “Not a Fish”. It looks like a fish, but has a much wider range of performance. We have incorporated Max McDonald’s ‘elevated wing’ in this model. Powered by the Bonzer 5-fin system, this board works equally well frontside or backside.Recommended size: 5’6” x 20 ¾” x 2 5/8” to 6’5” x 22” x 3”

ROBERTS SURFBOARDS Shaped by Robert Weiner CAMPBELL BROTHERS Shaped by Malcolm Campbell

20 13 BOARD BUYERS GU IDE

VENTURA SURF SHOPLargest board selection in tri counties

Established in 1961, Ventura Surf Shop is a destination surf shop that has been serving the Gold coast for over 50 years. One of the last real surf shops, where surfboards, wetsuts and surf accessaries are what they sell. Custom shapes by local shapers; Campbell Brothers, Wayne Rich, William Dennis, Roberts, Spencer Kellogg, Bohning, Klaus Jones, JHR, Resist, McCrystal, Jim Allen and Kelly. There are over 350 new boards in stock, custom boards take from four to six weeks.

88 E. Thompson Blvd., Ventura (805) 643-1062 • www.venturasurfshop.com Customs Available

William-Dennis team rider Tim Nesbet.

www.DEEPZINE.com 35

WILLIAM-DENNIS SURFBOARDS Shaped by Bill “Blinky” Hubina

Mega Fish Quad 9’ 3” x 23 3/8” x 3”11” tip to tip Swallow tail, V bottom with double barrel concave going from tail 2/3 length of board last 12 “of tail flat V turned down hard, nose pulled in for better turns. Paddles like a much larger board, turns like a much smaller board, instant speed. Fun in any kind of surf, the go to board in bigger surf.

Wildcard 3Designed by Wayne Rich and Michael Ortega9’-9” x 23 ½” x 3 – 3 1/8”The mindset here is, tip riding and style surfing, with a pure and simple ‘60s feeling! The tail is a wide crescent, the hips are back, and the deeply blended con caved nose is snubbed in a light curve to give the rider a perch. A design concept that, Wayne and Mike Ortega have been working on together for many years.

Pro/Mod9’0” x 18” x 22” x 13 ¾” x 2 7/8”A very progressive design, with hidden tradition inside, maintaining true longboard characteristics. Speed and maneuverability, mixed with nose riding, and smooth power turns in heavy surf, have been the main idea with this design since it’s conception in 2001. Usually a 2+1, but also great as a single as well. Designed by Wayne, Puna Moller and Vince Felix.

Roberts team rider Matt McCabe.

WAYNE RICH DESIGNS Shaped by Wayne Rich

PHOTO: KENYON

William-Dennis team rider Heston Jordon on 9'0" Quad Pro Comp.


The Sub Mariner5’10” x 19 3/8” x 2 3/8”Short board with modern foils and outline designed for getting the best performance out of everyday surf.

Fish5’8” x 21 5/8” x 2½”True fish in a shape that has been proven. Glass on fins are placed to gain momentum into fast smooth turns, yes including the round house. Fits in the pocket where ever you want to put it. Like other Klaus Jones boards, the shape is right on along with amazing quality and durability that’s hard to find.

Mini Simmons 5’6” x 21 ½” x 2 ½”Old school with glass on wood twin fins just off the tail, extremely fast down the line and maneuverable. Floats well, great board for a good surfer that wants to try something fun and different. Serious shaping, great craftsmanship and made to last.

JHR SURFBOARDSShaped by John H. Roddenberry

The ‘CF’ 5’10” x 19 ¾” x 2 ¼” An all rounder shortboard hybrid. Order 4”-6” shorter and 1”-1 ½” wider than avg. shortboard. Best type of surf: Crowded pointbreaks.

BOHNING SURFBOARDS Shaped by John Bohning KLAUS JONES SURFBOARDS Shaped by Klaus Jones

The Californian6’0” x 19” x 2 ¼”15 years of RnD by Ventura Counties superstars and underground hero’s implemented in what is simply called the Californian. A high performance short board.


VENTURA SURF SHOPDestination For all your surfing needs

Over 750 new and used surfboards in stock. Large selection of wetsuits, with the shop carying a full line of men, women and childrens suits by O'Neill, Quksilver, Billabong and Rip Curl. There will always be a size and style to fit you and your budget. Shop also has a great selection of beach wear and sandals, along with every surf accessary you will ever need. Ventura Surf Shop offres a repair service, rentals and consignment sales of boards.

88 E. Thompson Blvd., Ventura (805) 643-1062 • www.venturasurfshop.com Customs Available

www.DEEPZINE.com 37

JHR SURFBOARDSShaped by John H. Roddenberry

The ‘Rude Boy’ 6’3” x 18 5/8” x 2 ¼”A high performance shortboard. Magic rocker good for boards from 5’8” to 6’8”. Best type of surf: Excels in anything with a pocket, wall and a lip!

Single Fin Hull Design 5’7” x 18 ¾” x 2 3/8” This is a single fin with bottom contours inspired from various boat designs. Features belly rolled v bottom to double concave and a chimed rail make this board a blast from the past. Ride this board at our local point break and you will love the way this cruises on its wider arcing turns and glides through sections.

Generator 5’8” x 19” x 2 ¼” This board is based off of small wave “producer” model. I ended up adding 1” width to nose and ¾” to the tail. We wanted to take the aspects of the Producer model and morph it into more of a groveller design by adding volume for smaller days. Standard Generator is a 6k. Meaning it has a 6” Tail block. Choose your power level with how wide of a block you want to go. The Generator is typically ordered as a 6K, 7K or 8K.

RESIST SURFBOARDS Shaped by Jeff Hull

Local hero Shawn Saylors riding a Bohning SS model in Mexico.

Resist team rider David Ditmar.

PHOT

O: CO

LIN

BROW

N

John H. Roddenberry testing one out. PHOT

O: L.

PAUL

MAN

N


T-LowThe plan shape of the T-Low takes a different path than the extreme curves in the DFR and Proton by utilizing medium entry and low exit rockers. T-Low bottom contours combine single concave at the 12” mark to flat exit through the back fin. The rails are tapered so consider riding this board 1/16” thicker than your DFR, Rubble, Proton, Rookie etc.Experience: Novice to ExpertIdeal wave size: knee high to well overhead

Fred RubbleRidden by Conner in all conditions, from low tide Rincon and dumpy HB, to the fat faced mushy stuff. The wide point is forward to skate over flat sections but with more tail kick than a Flyer so it stays tight when turning hard in the pocket. Super Spicy and the perfect board to fill the gap between your shortboard and your Dunpster Diver.Experience: Intermediate - AdvancedIdeal wave size: Waist high to a little over head

Weirdo RipperIdeal for that small to medium all-around board in your quiver is the Yadin Nicol created “Weirdo Ripper.” Development began with Yadin in a CI shaping bay getting weird on Al’s Pod design. The Weirdo Ripper spent over a year behind the scenes in development with Kelly, Dane, Nathaniel and Yadin until ultimately being unveiled at the 2012 US Open by Dane Reynolds, who displayed the board’s advantages in the tricky Huntington conditions. Experience: Novice to ExpertIdeal wave size: waist too slightly overhead

New FlyerFor 2013 Channel Islands has modernized the Flyer into a shorter and wider package. This new plan-shape allows for the same volume in a shorter rail line. We kept the forgiving 2-stage rocker and added spiral vee starting in front of the fins to allow for rail-to-rail quickness. The signature Merrick hip provides a pivot point for tight arcs. Experience: Intermediate - AdvancedIdeal wave size: knee waist to head high and excels in tight or tricky conditions.

Any use of this or any other logo is strictly prohibited without consent of Channel Islands Surfboards.

Any use of this or any other logo is strictly prohibited without consent of Channel Islands Surfboards.


AL MERRICKChannel Islands Surfboards

C.I. was built from humble beginnings in 1969. Influenced by Dick Brewer, John Price and Bob McTavish. Shaun Tomson, Kim Mearig, Tom Curren, Kelly Slater, Lisa Andersen and Sofia Mulanovich rode his designs to multiple world titles. “Our mission is to make the best boards using feedback from the best surfers … leading us into the future.”

Channel Islands Surfboards36 Anacapa St., Santa Barbara(805) 966-7213 • www.cisurfboards.com

www.DEEPZINE.com 39

#4A performance based California utility board, the “4” was the fourth board in a series of numbered concept boards built for Dane just prior to the 2012 US Open. Each concept board incorporated a blend of single to double with vee, 13+ nose and 15+ tail with a double bump. After a few months of tweaks and refinements, the result is a design that can be ridden in two different dimension sets to dial in the type of waves and conditions you surf. Dane rides a 5’8” x 19 ½” x 2 7/16” as a groveler and a 5’9” x 19” x 2 3/8” as a utility board.Experience: Novice to Pro Ideal wave size: Recommended for knee to head high.

Average JoeOver the last six years and hundreds of CI Demo Tour Stops we have learned a few things. Sometimes surfers just want something simple, fun, and easy to ride. The Average Joe is geared towards the things that make surfing fun; Increase wave count, and making more sections. While Channel Islands is first and foremost a performance based and athlete driven company, not everyone’s next paycheck hinges on their equipment.Experience: Novice to Pro Ideal wave size: Recommended for knee to head high.Ride this board: 4-6” shorter than your height


Pill 5’10” x 20 ½” x 2 ½”Designed as a go-to board for increased performance in small to medium surf. The Pill boasts a wider foreword outline combined with a curvy rounded pintail. This board really paddles and glides with ease while holding a smooth and connected rail when the wave steepens up. Standard sizes are 5’6”-6’8”

Redline 6’0 x 19” x 2 3/8”Speed, control and drive. The Redline has it all and once you step on the gas pedal, you will know what we mean! The performance outline features a swallow tail which allows for precise and control regardless of what the waves are like. Standard sizes are 5’6”-6’8”

Whatever5’10” x 19 1/4” x 2 ½”The ultimate all-around board in waves waist high to overhead. The outline is moderately wider in the nose and tail area for projection and is combined with a moderate-to-low rocker profile. This formula produces a responsive performance board that does not sacrifice any of the paddle or performance. Standard sizes are 5’4”-6’4”

Ugly Stick 5’7”x 20”x 2 ½”Short, wide and thick. Yep, that pretty much sums it up! Designed to be ridden several inches shorter than your height. The outline features an extra full curve combined with an extreme hip in front or the fins. This little number is perfect for when the waves are small and not so pretty. Standard sizes are 5’4”-6’0”

Dragon Fly 6’ 10” x 20 ½” x 2 5/8”Easy paddling and catching waves is the name of the game with the “Dragon Fly.” This Hybrid shape has a significantly wider forward outline. By combining a full and balanced foil with performance rocker and bottom contour, this design offers plenty of glide and turn ability for the surfer looking to maximize wave count. Standard sizes are 6’4”-8’6”

www.DEEPZINE.com 41


Mad Max 5’10” x 18 3/8”x 2 ¼”Designed for precise in the pocket surfing. A clean and balanced rocker, outline and bottom contour allows this board to be explosive yet controlled in a wide range of conditions. The Mad Max is the epitome of a high a performance shape. Standard sizes are 5’8”-6’4”

OG 6’3” x 19” x 2 ½”: The “OG” is the original J7 design. The concept for this board was derived from the long speedy point breaks surrounding Santa Barbara County. The “OG’s” clean and continuous outline is designed to drive fast and draw connected lines when set on a rail on open faces. Standard sizes are 5’10”-7’0”

Con Artist 6’8”x 20 1/8”x 2 ¾”Created as a modern throwback. The Con Artist is designed for the surfer who seeks the paddle and glide of a hybrid but the high performance of a modern shortboard. This model features a moderate/low entry to moderate exit rocker and a slight vee bottom throughout, promoting smooth rail to rail surfing in all conditions. Standard sizes are 6’6”-8’0”

JASON FEISTJ7 Surfboards

Jason Feist began shaping surfboards in 1998. After about a year of carving out foam for himself and a few close friends, Feist started the J7 Surfboards label. It has been well over a decade now and through feedback from team riders and loyal customers alike, Jason strives to create the most progressive and high quality surfboards available.

24 E. Mason St., Santa Barbara (805) 290-4129 [email protected] www.j7surfdesigns.com

J7 team rider Tia Blanco riding her 5'6" Mad Max.


Fark 5’2” to 6’0” Glassing: triple 4-oz. warp glass deck, double 4-oz. warp bottom Fin setup: Quad Farks go unreal in just about anything. Whether it’s Lances, Hatteras or Rincon, this board has the foam to get you in early and deep. It paddles easily and accelerates quickly, great for airs, and no nose = no swing weight.

Octo5’8” to 6’10” Glassing: triple 4-oz. warp glass deck, double 4-oz. warp bottom Fin setups available: Thruster, Quad The Octopus (Octo) is a high-performance shortboard. Working with Dan Malloy, we’ve designed a superfast, loose, easy paddling board that handles a large variety of surf – from 2-foot mush to double overhead.

DM35’11” to 6’6” Glassing: triple 4-oz. warp glass deck, double 4-oz. warp bottom Fin setups available: Thruster, Quad Lower than average entry rocker, and more volume under the chest, the DM3 paddles faster and gets into waves without pushing water. Very fast down the line. Great for front footed surfers.

F-Rocket6’6”, 7’, 7’6”, 7’10” Glassing: triple 4 oz. warp glass deck, double 4 oz. warp bottom Fin setups available: Quad, Quad/Thruster A very popular new concept for us in big-wave guns. Kohl Christensen’s favorite board. We stretched the Fark and made it a round pin. Very low entry rocker for early takeoffs. The quad gives control and speed and the ability to take a highline in the tube. Single to double concave and vee out of the tail. It’ll turn off the tail and perform much better in everyday surf than your regular mini-gun. One board travel quiver!

Nose Glider Longboard9’2” and 9’6” Glassing: triple 6-oz. glass deck (with optional 4-oz. warp glass knee patch), double 6-oz. E glass bottom Fin setup: single 9” Farberow Flex Fin The NoseGlider is great for experienced surfers looking for a versatile single fin + tip time, as well as for beginners just trying to cruise. The NoseGlider turns as well as it noserides. It has a full curvy outline and single concave (for lift and speed) fading out to flat and vee. The full rounded pin smoothes out turns and eases rail to rail transitions while still holding in critical sections.


FLETCHER CHOUINARDFCD Surfboards

We began in 1996 with a goal of making the strongest, lightest, hand shaped boards possible. “Causing no unnecessary harm” is our guiding principle, so by default each board minimizes the use of toxic and nonrenewable materials, and we build each board one at a time as if it were our own. FCD Surfoards.

43 S. Olive Street, Ventura(805) 641-9428 • www.fcdsurfboards.com [email protected]

www.DEEPZINE.com 43

Beavertail Longboard9’2”, 9’4”, 9’6” and 9’8” Glassing: quadruple 6 oz. tinted glass deck, double 6 oz. tinted glass bottom Fin: single The BT is inspired by the classic retro style of the late ‘60s. Ridden by Chris Malloy and Ben Lemke, and tested on points all over North and South America. Thin, knifey, 50/50 rails and extra weight help carry it through crumbly whitewater and flat sections. Rolled bottom and deep single concave in the nose. Square or pintail. Small day savior.

Fish5’6” to 6’4” Glassing: triple 4-oz. warp glass deck, double 4-oz. warp bottom Fin setups available: Twin, Quad This twin-fin excels on waves from 1 to 5 feet. It generates speed easily and carries momentum through the flat sections. Playful and maneuverable, this fish acts like a small skateboard.

Round Pin Longboard9’0” Glassing: one layer 4-oz. warp glass and two layers 6-oz. glass deck, double 6-oz. bottom Fin setup available: 2+1 is standard This longboard gun works well in a variety of conditions: control and speed in big surf and effortless glide in everyday stuff. It’s a great option for in between “big” and “huge,” when you don’t want to break out the cruise missile yet. The best longboard for tube riding, the Round Pin has been tested extensively by team rider and filmmaker Dave Ogle in Puerto Escondido and Hawai’i.

PHOT

O: TI

M D

AVIS

PHOT

O: C

HRIS

BUR

KARD


Slab 5’10” x 18 3/8” x 2 5/16”John John Florence’s favorite high performance board. Great power surfing board and good in all types of waves. A ripping shortboard. (Full description at www.pyzelsurfboards.com)

Pyzalien Vee 5’8” x 19” x 2 ¼” Similar to the Pyzalien, but more Vee in the tail area. Double barrel concave. (Full description at www.pyzelsurfboards.com)

Pyzalien5’10” x 19 ¼” x 2 3/8” Made to be ridden shorter and wider then your normal shortboard. More volume. Good in mushy, sloppy surf. Straight concave. (Full description at www.pyzelsurfboards.com)

PYZEL SURFBOARDS Shaped by Jon Pyzel MATT MOORE SURFBOARDS Shaped by Matt Moore

Rincon Round Pin 6’ x 18 ½” 2 ¼” High performance point-break round pin. Tail riding board, and great pocket styled board. Thruster or quad fin set up.

The Mag 6’8” x 22 ¾” x 2 ¾” A higher-performance fun shape board. Rocker is very similar to a high performance short board but with a fuller outline. Wide point is back a little bit creating a tail riding board. Made for someone who wants a little forgiveness in the board. A great versatile transition board from longboard to shortboarding. Good paddler, nose is tucked narrower so you can still duck dive.

MATT MOORE SURFBOARDS


PHOT

O: D

UBOC

K.CO

MPH

OTO:

DUB

OCK.

COM

www.DEEPZINE.com 45

Claw 5’6” x 19” x 2 ½” High-performance shortboard. Ride the Claw wider and shorter than your normal board. A much wider plane shape in the nose and tail. Any fin configuration. One of our more popular surfboards and very versatile.

The Mule 6’8” x 21 ½” x 2 5/8” For the bigger surfer. High-performance fun shape with maneuverability of a normal shortboard. Best in 2- to 6-feet surf. Great entry board for people going from longboard to shortboard.

Mini Bar 5’7” x 22” x 2 ¾”Twin fin, mini Simmons styled. From zero - ???” Good in all conditions. Fast, super planable and surprisingly maneuverable and controllable. 8 boards total. Same order as the word document. Pyzels first, followed by MM boards.

MATT MOOREMatt Moore Surfboards

Matt Moore is a surfboard shaper who grew up in Carpinteria and started surfing in 1959. Out of necessity to explore function of surfboard designs and construction, flex, fins, fiberglass and foam are all phase’s that have formed the Matt Moore logo. “I started taking custom orders in the late 60’s and have never stopped helping people make their surfing dreams come true.”

659 Linden Avenue, Carpinteria(805) 684-2413 • www.rincondesigns.netCustoms Always Available

Team rider Bryan Schmidt riding a Blaster.


DAVENPORT SURFBOARDSShaped by Adam Davenport40/65 Growing up riding Weber Performers and Rick UFO’s, Adam set out to pay tribute to the shapers of old school boards. In 2007 the 40/65 was shaped by Adam taking his surfing knowledge to create this incredible noserider.

ORBICULAR SURFBOARDSDesigned by Randy SchaeferOrbicular GliderThe Glider has its original roots in Baja with the help of San Miguel Surfboards shaper Eduardo Echegary. In 2001 I worked to help him design the board for our point waves. The board is now made in Ventura.

DENNIS RYDER SURFBOARDS

Shaped by Dennis Ryder67 A traditional single fin performance long board with a slender over all foil. Nice curve in the outline back of center with a soft rolled bottom and accelerated rocker out the back for quick turns and playfulness on the tail. Narrow nose for lighter swing weight and better wave face fit. A long, and low, rocker curve through the nose for good trim and nose riding. Takes traditional long boarding to new performance levels.

HOYTE SURFBOARDS Shaped by Russell HoyteThe RehabShaping his first board in 1980, the Rehab model combines old school design with new age knowledge. The 60/40 rails with a down rail 1/3 up makes this board turn on a dime in all situations. The full nose makes for great tip rides.

STEWART SURFBOARDSShaped by Bill StewartHydro Hull Designed in 1982, the double concave bottom and bevel rail was completely innovative at the time. In 1985 Bill intro-duced the 2+1 fin configura-tion which changed the face of modern longboarding.


CULTURAL HERITAGE...is where our surfboards are based.

Cultural heritage is the legacy of physical artifacts and intangible attributes of a group or that are inherited from past generations, maintained in the present and bestowed for the benefit of future generations.

154 E. Thompson Blvd., Ventura(805) 652-2201 www.wavefrontsurfshop.com

www.DEEPZINE.com 47

ORBICULAR SURFBOARDSDesigned by Randy SchaeferEggInspired by a 1975 Rick egg I rode for years, the Orbicular Egg was modernized with a round pin tail for faster turns, and flow through concave replacing the hull bottom. Ride with a single flex fin for point waves, or add the side bites for steeper waves.

ANGELL SURFBOARDS Shaped by Craig AngellHighlinerThis fast, versatile design is comfortable in a wide range of surf conditions. Drawing on his 20 years of shaping, Craig has created a truly timeless board.

DENNIS RYDER SURFBOARDSShaped by Dennis RyderHull In the summer of 1969 the Wilderness crew received about a dozen new board outlines from Greenough sent from Australia. Being the shaper it was my responsibility to take the soft outline copies and make hard copies for any new designs we wanted to work up. As well, being a shaper I wanted to keep these outlines for any future use. Now some 40 plus years later I use those same outlines to draw from for my hull designs. And, with my new Hull I’ve done exactly that, it’s built from one of those original Greenough outlines.

CLYDE BEATTY JR. Shaped by Clyde BeattyMini TModeled after the Simmons board, Clyde transformed this model into one of his best shapes yet. With his unique fin placement, this board out performs other traditional Simmons style boards.

center

stagePH

OTO:

DAV

ID PU

’U

Art innocent Sean Tully applying a wet amber stroke on a Santa Ana groomed magic carpet ride.

www.DEEPZINE.com 49 www.DEEPZINE.com 49

www.DEEPZINE.com 49 www.DEEPZINE.com 49


Escape Pod Shaped by Max McDonald5’8” x 15 ½” x 20” x 15” x 2 ¾” High Performance Bonzer with a curvy outline. The rolled nose and Bonzer bottom allow this board to handle a wide range of conditions, from knee high mush to well overhead. “Surfs like a bar of soap thatturns on a dime.” Ride as a Bonzer 5-Fin, quad, or single fin.

The GunShaped by Max McDonald9'10" x 21 5/8" x 3 ¼"Designed and created by Max from his experience on those big days at San Clemente Island. Great thickness - 3 ¼” - to get you in a little earlier, and "out of harm's way" quicker. Elevated wing Bonzer 5-fin for added speed and responsiveness. “If you can't catch it on this board, you don't want it”.

Stringerless HybridShaped By Sean O'Connor 6’4” x 20 ¼” x 2 ½” The Best of both worlds ... Extra thickness and a forward wide point, along with the full outline in the nose, equals more paddle power. The single to double concave creates more lift and speed, and the pulled in tail combined with the beveled rail gives it the responsiveness of a shorter board. Epoxy construction, carbon cloth glass, and thumb rails make the board ultra-light and strong. 5-fin set-up allows you to customize for various breaks. Designed to be ridden in anything up to head high.

Mini Grouper5’6” x 20 ¼” x 2 3/8”A Santa Barbara Original. One of the most versatile surfboard designs and a culmination of many design theories. The full outline and bottom contours give this board plenty of speed and drive with smooth rail to rail transitions. Good for most any conditions up to head high.... fast, powerful, and responsive.

70s Revisited6’6” x 14 5/8” x 20 ¾” x 16” x 3” “I used my original 70’s templates and modified the bottom, and rocker, with some of the things I learned since then.” It's that 70’s Flow with “Get Up and Go”

MAX MCDONALD SURFBOARDS Shaped by Max McDonald

REVOLUTION HARDWARE


SURF COUNTRYGoleta the Goodland

Surf Country is your one stop surf shop and has been serving Goleta for over 16 years. Owner Doug Yartz is always behind the counter and the shops unique in-house shaping bay is used daily. For just $450 you can shape your own board with input from Yartz. The shop also boasts a great selection of all types of surfboards.

109 S. Fairview, Goleta(805) 683-4450 www.surfcountry.net

www.DEEPZINE.com 51

DOUG ROTH SURFBOARDSShaped by John Lessing

Noserider 9’6” x 18 ¾” x 23 5/8” x 15 ¾” Designed for noseriding. 2+1 fin setup. Your classic nose rider.

SHAPE YOUR OWN BOARD Starting at $450. Includes blank, glassing, fins and tools. Call for more information.

ECLIPSE SURFBOARDSShaped by Greg Iler

Hulafish5’10” x 20 ½” x 2 ½”Full outline with a fair bit of curve thru the template and a relaxed rocker, single to double concave thru the tail area which is a 5 fin variable. Allowing the rider to switch between tri and quad setups in different surf conditions. Works well in 3’ to 6’ waves with some punch.


Daily DoseSome call it The Pill, The Med, The Double Ender. Either way, with its rapidly growing popularity, the Daily Dose has become a sought-out alternative to all other boards, suiting nearly every surf condition. Can be built to suit full high performance or for a smaller alternative to fun longboards.

Dart TwynzerThis board comes as a sister to the Dart. As a Twynzer, we have taken it to a new level by giving it another gear. With blinding speed straight out of the gate, the Twynzer Dart goes into complete rail to rail turns without losing any momentum. It has the ability to hold higher in the pocket than just the normal quad. Best surfed knee-high slop to overhead barrel.

California SpudRussell started developing this type of board almost two decades ago, working to create the perfect blend of a full-figured outline with high performance rocker and bottom contours - allowing the surfer to find ease of paddling without losing performance. This board is a slam-dunk for surfers of all abilities.

Mini Symmons TwynzerThis is a ramped up version of our “Mini Symmons Space Bar”. The pulled-in tail, slight accelerated rail rocker and twinzer fin configuration allows you to push the boundaries of performance while experiencing the speed and fluidity that a Mini Simmons has to offer.

Space BarRussell's version of the ever growing popular Mini Simmons. Holding true to the nick name “Bar of Soap”, the Space Bar is not only extremely fast but utilizes the unique bottom contour and rail design to carve out new performance lines that give an out-of-this-world experience.


RUSSELL HOYTEHoyte Surfboards

Russell Hoyte, in his 40’s has already acquired a lifetime’s experience of shaping and surfboard building. He has the ability to create custom boards to suit a majority of the surfers and waves in the world. He currently owns and runs Hoyte Surfboards in Ventura, California where he designs and builds completely custom state-of-the-art boards. He believes in personal customer relationship, attention to detail and excellence in his craft.

Family, friends and community are a priority to him and his family and their goal is to have a place that not only produces great surfboards, but provides a place for building community.

Hoyte Surfboards. Honoring creativity and identity to build community.

Available at Wavefront Surf Shop (Ventura)(805) 485-0700www.hoytesurfboards.com

www.DEEPZINE.com 53

Daniel Jones riding the RX3 at Ala Moana Bowls.

HP NoseRiderWe have taken our High Performance Longboard, flattened the nose rocker and widened it. This creates a full platform for hang ten ability, but still with high performance rail to rail surf-ability.Features a concave nose, chimed off rail and single to spiral “V” out the tail.Knee high to overhead surf.

RX3This has a low-entry rocker with a slight single concave accelerating out the tail. A staple board for any quiver. Good for knee-high surf to a couple feet overhead and for all types of surfers.

The Cherry BombThe Cherry Bomb is a cross blend between the Classic Noserider and a modern performance longboard. It has a lower entry for glide and speed and an accelerated tail flip to lock in those noserides. The bottom contour starts with ample nose concave fading into a double concave center with accelerated “V” out the tail.


v.Bowls 6’6” - 8’2”Designed to give the best and most useable mix of a displacement hull’s speed and a widepoint-back template and foil. Ridden and driven from behind center to give that slingshot bottomturn and high line trim that’s so addictive in a wider variety of surf and for a wider audience.

Pintail v.Bowls6’6” to 8’2”A round-pin variation on my favorite board. This alteration gives more hold in critical sections and can handle a bit more power. Makes for an amazing travel board and all around quiver-killer around 7’4” to 7’6” in average Santa Barbara conditions.

v.Bottom8’8” to 9’5”A modern take on the transition-era shaped of Bob McTavish. Flat deck lines and thin rails, finished off with a deep rolled vee bottom that gives a ball-bearing kindof ride with tons of projection off the bottom and looseness off the top. Loves playful longboard waves and screams down the line in point surf.

Piggyback5’6” to 6’4”A modern high performance twin-fin inspired by the current move towards curvier, flatter and shorter shortboards. Loose and drivey with lots of hold and the ability to connect long drawn-out lines. Really likes good waves and seems to go pound for pound when the surf starts pumping. Can be shaped as a quad - opening some doors to less than ideal surf.

SB Stub6’0” - 7’6”These displacement hulls are shaped traditionally and with lined up point waves in mind. Slingshot bottom turns and tight pocket rides are the name of the game. A necessary board for anyone searching for a more connected and speed/flow oriented experience.


RYAN LOVELACERyan Lovelace Surf Craft

Constantly immersed and overly excited. Lovelace shaped his first board in 2005 and all was lost. Nine years later finds him counting his blessings daily. Shaping throughout Europe, Australia and Indonesia along with an extremely close-knit community in Santa Barbara provides a depth of inspiration that translates into a truly unique feeling. 100% hand-shaped and glassed, each of his boards are truly hand-crafted and custom.

[email protected]: @ryanlovelace for a constant stream of the here and now of everything surrounding this.Stock boards available at Wetsand Surf Shop, Deus Ex Machina and MVMT.

Trevor Gordon and Travers Adler.

PHOT

O: KE

ITH

NOVO

SEL

www.DEEPZINE.com 55

ThrougHull6’4” to 7’”This displacement hull variation seems to handle it all. A Michael Peterson style template with a modern rocker and thin but forgiving foil for a hull. Originally intended for tropical travel, it wasn’t too much of a surprise when the original version came back home and started slaying all of the local spots as well. The Throughull remains one of the most well reviewed boards of mine by novice hull riders up through the seasoned vets around the world.

Baby Brick4’11” to 5’4”A wee nugget if ever there was one. Shaped with a Simmons style foil, but chopped down and with a refined outline. Blunting the nose creates a longer template curve in a smaller package—that meaning you’re getting the rail line of a 5’5” in a 4’11”. Lots of down the line momentum. Skatey and quick. Designed as a quad but can be shaped as a twin as well.

Rabbitsfoot5’ something”Experimentation gone beyond. Documented heavily and ridden by some of the worlds most freakishly fluent finless fanatics. Details are sparse because evolution is constant.


Tribal 5’4” – 7’Classic Hawaiian styled pin tail. We wanted hard bottom turns and drivey cut backs. This classic pulled pin gives you all that with modern to date concaves and rocker you can really push this shape to the max. This design works in all size ranges.

Island FoxAll size ranges. Single fin, wing pin. This was the main tool throughout the ‘70s. Upon closer inspection there is subtle concave flowing into fluted wings and spiral “V.” It carves deep, pure, clean lines while moving forward into the pit to a perfect trim position. Easily catches waves as you navigate across the face like a fox. Truly a design worth revisiting.

Classic Thruster / Quad5’6” – 7’2” 80s outline and volume but with modern concave and rocker. Great wave catcher, just clean, smooth, fast surfing.

Shrimp Model 5’2” – 6’10”Quad or tri-fin (Both ride uniquely different)Our riders call it the ripper. High-energy board design to generate a lot of turning even in low energy spots on the wave. Because of the extra flotation volume, you can ride it a few inches smaller than your usual. It may require getting used to the looseness at first, but you’ll adjust to a very busy ride. Quad or Tri-Fin, both ride uniquely different like having two boards in one. Really a great machine for most of our wave conditions around here. Customs always available.

Threedom All World5-4” - 7’8” 2 +1 fin setupThis is the original Threedom model from 1980. Of course the new ones are more refined with modern udpates. This is a design I had from way back in the early ‘80s. A shortboard with a 2+1 fin arrangement. My best kept secret. You’ll have to try one to see how it performs.

JVP SURFBOARDSHANDSHAPED BY JOHN PERRY


JOHN PERRY

JVP Surfboards

Remember Ocean Rhythms Surfboards? I started that surfboard company back in the mid ‘70s after a three year world surfing adventure. Ocean Rhythms was really a blast back then, exploring a diverse board forum with several classic shapers under one roof. This is my second go round with surfboards, after a hiatus and a career change as now a water systems engineer. Now, known as JVP Surfboards, I surround myself with other passionate surfes continuing on the path of design and function, some recycled and some seemingly fresh. It’s all from what you learn from one another … we call it “serious fun!”

Available at www.jvpsurfboards.com (805) 637-5100

PHOT

O: JO

N SH

AFER

Tony DeGroot on the Threedom.

PHOT

O: PA

UL G

REEN

E

www.DEEPZINE.com 57

Viper7’4” – 8’6”2 + 1 Fin My personal model. This shape is not a quick sturdy. There is a lot of surfboard evolution built into it. Speed lines combined with drafting hull components, along with concaves, rocker and fin placement were deduced over a five-year period. Cross stepping, carving bottom turns and off the lips. Travels over slow section and is comfortable in the pit. This board never seems to get old under your feet.

Albatross 9’ – 10’2 + 1 Fin and Spoon is optionalUnlike a traditional long board approach, it rides easily from the center as you would a short board, pump and turn. The continuous bottom concave and double barrel and allow this board to generate a lot of speed. Three words describe this design: Power, grace and glide.

Egg 4 Young 5'0"- 6'10" This traditional “Egg” has been “tweaked”!!! The Mini-Egg skates instantly due to a concave bottom. The release is in chamfered rails in the upper third, and the accelerated pulled in round-pin generates alot of drive. Throw in the Quad/ Tri/ and a single box possibilities and you have an Egg on steroids. I enshrined this one in 100% Carbon-Fiber with epoxy coating, light and strong. Although regular fiber glass is optional. Sky is the limit on the performance levels and wave handling characteristics with all these fin options.


Hybrid 1This is an example of taking two amazing things, and trying to fuse the best qualities of each. This board maintains the forgiving volume, width, straight rails, flat bottom, and fin placement of a mini simmons. But has the foil, and rocker that is more similar to a common fish shape. That complimented by an open alternative tail, loosens the board up, and makes for much more agile turns. Order 5’2” to 5’6” (Modifications of your choice are welcomed).

Hybrid 2If there is only room for one board to keep in your vehicle at all times, this is it! This thing is so efficient and fun on such a broad spectrum of waves, that it will inevitably become your go-to board. For the majority of the year, it would be really tough to legitimately say, “I brought the wrong board for today.” Thick and wide for knee-high fun, yet short, with a bit more rocker, making it a dream in head high conditions. The pulled in nose, diamond tail, and fin placement makes this board forgiving on late drops, very responsive with bottom turns, and easy to crack off the top! Order between 4 to 6 inches shorter than your fish.


TYLER MALTACITO SLEDS

I have been extremely lucky to live in a place that allows great creative freedom with surfboard

design, and places me in close proximity to the best shapers in the world. It’s with a ton of inspiration from

these craftsmen and with the utmost respect for them and their designs, that I make very fast very fun boards for

virtually any wave in Santa Barbara County.

[email protected]: @tyler_citosleds

www.DEEPZINE.com 59

Classic Mini SimmonsA traditional mini simmons is an absolute necessity in every quiver. Works great from 4’11” to 5’4”. Typically 22” wide. A flat-bottomed twin fin, with straight rails to a fat tail creates insane speed. These boards are well known to change lives! The volume of this board, mixed with it’s surprising maneuverability, turns poor/small surf into a super fun session. It’s not just a small wave board though. Comfortable and a blast to ride in up to head-high surf.

Compact DiscInspired by Gary Hanel’s original “Pill” design, this board has proven very effective in a wide variety of surf. It has a generous amount of foam, in a classic egg shape, but is much smaller than your typical egg. This makes it a great weapon against small/mushy waves, but will hold in head high plus surf. The volume provides awesome

PHOTO: NICK PRESNIAKOV

paddle power, while the planing bottom gives the ability to fly down the line. The versatile fin options allow for much deeper and faster turns, maintaining your drive and momentum throughout. Works best between 5’2” to 5’7”. This board also loves a feet-together, fast trim with a single fin setup. (Custom orders always on option).

All your Surfing and Lifestyle Needs - Join the Revolution


Chubby CheddaFrom 5’6” – 6’6”Fin Setup: ThrusterThe Chubby Chedda is best described as a ‘performance-hybrid’ shortboard, and should be ridden at least two inches shorter than your standard high performance craft. And if push comes to shove, the design will hold its own in overhead surf as well.

UnibrowFrom 5’6” – 7’0”Fin Setup: 5-FinDesigner Dan Mann says “The Unibrow has roots in a design I’ve been riding as my regular short board, mixed with what I’ve learned from designing and riding the Dominator, Sweet Potato and Potato-Nator. The outline curve is compressed from a regular shortboard without sacrificing the width needed to maximize paddling and planing speed. Ultra versatile and highly responsive”

Profile V1From 5’9” – 6’4”Fin Setup: ThrusterThe PRO_File v1.0 was developed incorporating feedback from our top team riders to create the highest performance design in our range. The outline features continuous curve from nose to tail and with accentuated tail rocker added for more hold in the most critical part of the wave.

PotatonatorFrom 5’2” – 6’8”As the name implies, the Potatonator is the result of Dan Mann gene-splicing two of his most popular models: the Sweet Potato and the Dominator. The double concaves in this one are softer than the Sweet Potato and while the overall rocker has been increased slightly to enhance performance, the low entry rocker remains which makes paddling a breeze. Designed primarily for 2’-4’ surf, the Potatonator will hold its own in 3’-5’ as well.

VanguardFrom 4’8” – 6’2” Fin Setup: 5-FinThe Modern Planing Hull represents a radical change in the approach to high performance surfboard design. The hydrodynamic architecture of the Vanguard opens the door for a fresh approach to surfboard design and the art of riding waves. The rider will experience exceptional freedom and planing speed right form the get go. The very short nature of the design allows the rider to completely dominate the board while the straightened rail line will allow for precise turns and direct transitions.


REVOLUTION SURF CO.All Your Surfing and Lifestyle Needs.

Revolution Surf Co. has been in the surf and skate business since 1996. It’s owned and operated by surfers that have been in the industry most of their lives. With integrity in the industry and knowledge of running a professional business, Revolution Surf Co. has created a reputable name through their personal attention to customers and knowledge of their products. We have a great selection of over 300 surfboards in stock that include; Firewire, Roberts, Channel Islands, Resist, Bohning, Stretch, Surftech, GSI, Tropical Blends, and Del Ray. Join the Revolution.

1775 Daily Drive #C, Camarillo(805) 383-1288www.revosurf.com

Firewire team rider Noah Erickson putting one to the test.

www.DEEPZINE.com 61

DominatorFrom 5’2” – 6’10” Fin Setup: 5-FinDesigned by Dan Mann, and perhaps the most versatile board in the Firewire quiver to date, the Dominator combines a full outline with a thick foil from nose to tail and a 5/4/3 fin configuration. Dan moved the wide point back to reduce the nose profile, maintaining all of the speed but with none of the top turn drawbacks of retro nose outlines. Take Charge!

ArtilleryFrom 6’3” – 6’10” Fin Setup: ThrusterThe Artillery Series represents a combination of everything we’ve learned building step ups and guns for our top team riders such as Tahitian charger Michel Bourez, North Shore big wave surfer Gavin Gillette, and of course Timmy Reyes, who will paddle out in anything. The foils and bottom contours are refined and the outlines feature smooth curves from nose to tail. If you want to charge challenging conditions, these are the boards you’ll need.

AddvanceFrom 6’6” – 7’6” Fin Setup: 5-FinDeveloped in collaboration between Taj’s father Vance Burrow and Nev, the ADDvance offers extreme flotation in RapidFire technology. Combining the buoyancy of a longboard with a contemporary outline, the ADDvance Series opens up new possibilities for fun and performance. ADDvance your surfing!

For more information on the boards visit www.firewiresurfboards.com.


All Boards include: 1. Wardog-designed custom bamboo fin(s), 2. Non-H20 absorbing deck pad, 3. Big wave rated leash with safety quick connect…plus, shwag…and, a heapin’ helpin’ of pure old school STOKE!

Board Construction Options: Wood Sandwich, Carbon Sandwich, and Custom Kine “Made in 805”.

Pricing is easy … here’s how it works: The gorgeous boutique quality production boards with Australian Pine decks are $1,299; boards with Australian Pine decks – Top and Bottom are $1,399; and our acid washed SUPer-Lite carbons are $1,799. CUSTOM SUP’s Made in the “805” range from $1,349 to $1,799. Available in Maui Blue, Seafoam Green, Lime Green, Honeysuckle Pink & Silver.

WD Series 7’11” WD Wave Ultra High Performance Wave Ripper7’11” x 29.5” x 4.4”: 120 liters (Quad +1) The new 7’11” WD was developed for lighter and/or more advanced wave rippers. This board is very stable despite it’s extreme maneuverability. It is going to challenge you to go for it, more than you are going to challenge it to give you more. Very fast rocker lines and responsiveness for top to bottom squared off surfing.

WD Series8’4” & 8’6” WD Wave High Performance Wave Rippers8’4” x 30” x 4.6”: 132 liters (Quad +1)8’6” x 31” x 4.6”: 140 liters (Quad +1)The 8’4” & 8’6” WD were developed for more advanced wave rippers to push the limits of short board paddlesurfing. These boards are very stable with generous volume for their size, and will reward you with extreme maneuverability. Ride them as a quad to get max speed out of them...on bigger days add a StubNub or switch out to tri-fin for more drive. Very fast rocker lines and responsiveness for top to bottom squared off surfing.

WD SeriesHigh Performance Wave Rippers8’10” x 32” x 4.6” : 150 liters (Quad +1)9’2” x 32” x 4.6” : 158 liters (Quad +1)The 8’10” & 9”2” WD were developed for bigger guys who are more advanced wave riders. Wardog's original 8’10” WD was put into production by Starboard, which he named the “Wide Point”. We have further refined this global best seller and added a slightly longer version to push the limits of short board paddlesurfing. Ride them as a quad to get max speed out of them, or on bigger days add our StubNub center or switch out to tri-fins for more drive. Very fast rocker lines and responsiveness for top to bottom squared off surfing. Rips in surf from 2 - 10’. Great travel boards.

Stoke SeriesAll Wave Model SUP9’6” x 30.5” x 4.4”: 150 liters (Quad +1)9’6” x 32” x 4.4”: 165 liters (Quad +1)9’6” x 33.5” x 4.4”: 175 liters (Quad +1) The STOKE model is our #1 all around wave rider for most avg-size riders and is a great airline friendly travel board. We’ve added the Xtra-Wide size for bigger riders who want a smaller board that will surf more like a shortboard. Women especially like this board in our SUPer-Light Carbon construction for improved off water mobility.

Mahalo Series Best All Around SUP 10’3” x 29.5” x 4.3”: 165 liters (2 +1) 10’3” x 31” x 4.5”: 175 liters (Quad +1)10’3” x 33” x 4.5”: 185 liters (Quad +1)The MAHALO is a very refined all around SUP that excels as both a wave rider with great glide and stability … as well as flat-water paddler. The two bigger sizes were designed for bigger riders who want a maneuverable wave board and/or even women paddlers that want more stability for paddling with their children and/or dogs.

www.DEEPZINE.com 63


WARDOGStand Up Paddle Sports

Wardog has been immersed in surfing culture for over four decades and has been in business designing and selling boards and fins for over 20 years. Thousands sold to date.

With a degree in Oceanography and passion for water sports, he knows what works, why it works, what doesn’t, and why you deserve proven high performance board design and accessories manufactured with quality material and construction techniques at a fair price.

All of the shapes we offer are born and tested by Wardog Designs. A lifetime dedicated to water sports, and collaborations with some of the top surfboard shapers on Earth has now been combined with state of the art CAD computer board shaping technology.

We have developed and tested our shapes in both surf and flat water environments. We know you’ll be Stoked For Life® with our products and thank you for taking a look.

Mahalos - Wardog

121 Santa Barbara St., Santa Barbara(805) 962-SUPS (7877) www.SUPSports.com

One World SeriesAll Around Cruiser11’1” x 30” x 4.6”: 200 liters (2 +1)11’1” x 32” x 4.6”: 215 liters (2 +1)The name says it all: ONE WORLD. One board that ANYONE can ride ANYWHERE in the world … the ONE WORLD is the truest execution of an “all waters” SUP on this water planet … arguably, the best all-around SUP on the market …ONE BOARD…ONE PADDLE…ONE WORLD. The board has incredible glide for an 11’1’’ board, better than other company’s 12’6” racers... and, it can ride waves from 2’ - 20’.

One World Surfari Coastal Surfing Cruiser 11’11” x 31” x 4.6” : 225 liters (2 +1)The ONE WORLD SURFARI is an excellent choice for fitness paddling and coastal touring. Maximum glide and speed with very refined, soulful, longboard style wave riding characteristics…capable of surfing massive walls of moving water if you are…and, has greater glide and stability than a number of 12’6” canoe nose SUP’s on the market.

Hammer SeriesCustom All Around SUP7’11” x 30” x 4”: 117 liters (Quad +1) 7’11” x 31” x 4.4”: 132 liters (Quad +1) 8’5” x 31” x 4.4”: 140 liters (Quad +1) 8’11” x 31” x 4.4”: 148 liters (Quad +1) 9’5” x 31” x 4.4”: 160 liters (Quad +1)9’5” x 33” x 4.6”: 178 liters (Quad +1) 10’” x 31” x 4.4”: 170 liters (Quad +1)No hype, the Hammer is simply the best all around wave rider for the Central Coast...100% designed to maximize surfing the waves of the 805! The Hammer has 3 distinct riding areas...it speeds up when you move into the nose area for extra long nose rides...it can be trimmed from the middle while turning...and, it rips turns off the tail like a short board. Especially, with our custom fin sets.Because of it’s incredible stability... phenomenal glide ... and, optimized volume distribution... etc... you can ride it around 8” to 1’ shorter than you normally would... which helps tremendously in maneuverability and off-water mobility. Available in custom sizes.

PHOT

O: S

COTT

GIB

SON

/ GRE

G HU

GLIN

FILM

S

Bennett Williams on the 11’1” One World .


ANCIENT ART SURFBOARDSShaped by Rick Avant

Astro Zombie6’ 4” x 22” x 2 5/8”The Astro Zombie is a single fin semi-displacement hull stubbie with a hydrosperical concave and a “ Flying A” stinger system. The board is good from 2 to 8 foot and excels at point breaks and reefs. Fast down the line acceleration and quick responsive turning, great barrel riding board holds high in the pocket. This board will even blow out the tail. A really versatile single fin.

(805) 489-2177 [email protected]

SHANE STONEMAN SURFBOARDSShaped by Shane Stoneman

The Icarus 5’8” x 19” x 2 5/8” The Icarus is a shortboard for people are looking for fun and freedom in a variety of conditions. The board sports a lot of float, medium rocker, a sexy outline, and a bottom that translates to a fast and loose feel. It performs incredibly well in a variety of conditions.

www.shanestoneman.comAvailable at Wavelengths (Morro Bay) Moondoggies (SLO, Pismo Beach) Free to Ride Surf Shop (Capitola)

THIRD WORLD SURF CO. Shaped by Jason Kline

Mini-Sim HP5’-4” x 20 ½” x 2 ½”This is the high performance version of my original Mini-Sim. Another tribute to Bob— who flew faster than the rest in his day. From the outline, fins, concaves and modern rails, this board has been shaped to perform in small to head high surf. Floaters, hacks and roundhouse cutbacks are all possible. We specialize in custom airbrushes, pigments and tints to make your Sim truly one of a kind. If you can think of it, we can shape, glass, and spray it for you within 2-3 weeks. Live free, glide fast.Custom surfboard orders handshaped by Jason Kline.(805) 459-5834 [email protected]

R. LUCKE SURFBOARDSShaped by Ray Lucke

Lucky Lucke Mini Simms The Lucky Lucke is a classic contemporary design that encompasses full rail high-speed surfing in any condition. The shape looks funny, its hydrodynamic lines make it one of the fast boards on the planet, and is becoming a favorite along our coastline from the best rippers, to beginners, to intermediate surfers who finally found a board to progress on. Making sections is the key to surfing, and this is the board that does it!

Available at www.rayluckesurfboards.com(805) 732-4694 [email protected]


M.D.S.* SURFBOARDSShaped by Matt Sparks

The Sparrow5’8 ½” x 19 1/16” x 2 ¼”A symbol of good luck and the end of a long journey. For many surfers this journey is for the magic board. If you are looking for a fast, responsive and forgiving board, “The Sparrow” is the answer.

Custom orders(805) 231-6116 www.mdssurfboards.com

www.DEEPZINE.com 65

LOYD SURFBOARDSShaped by Gabriel Loyd The Fun Guy6’10” x 21” x 2.5”Great all-around board for beginner to expert. Perfect for California style waves, beach breaks and point breaks.

www.loydsurfboards.com (805) 441-5103 Available at Panchos Surf Shop (Pismo) Central Coast Surfboards (SLO)

SCRIVI SURFBOARDSShaped by Cory Scrivner

Scrivi 1 6’0” x 19 1/4” x 2 1/2”Waist to 3 feet overhead. This board is a single/double with spiral vee out the tail, but also works as a single concave. Works very well rail to rail and in the barrel. Also recommend this as a thumb tail. (805) 616-8908 [email protected] Facebook.com/scrividesigns Instagram: @scrividesigns

SCRIVI SURFBOARDSShaped by Cory Scrivner

Scrivi 3 Step-Up6’7” x 19” x 2 5/8”The Scrivi 3 is your go-to board for 2 feet OH - DOH+ surf. The bottom has a double within a single concave to vee out the tail with flat panels along the rail line. Extremely stable in big barrel as well as open faces. Winter is coming, be prepared!

(805) [email protected]/scrividesigns Instagram: @scriviboards


SUP HOE NALU HAWAII Upright Sports GT Series SUPAvailable in 9’6” – 10’6”The GT is our most high-performance SUP. It is very nimble in small waves and very fast down the line in large waves. If you have no fear, the GT Series will take you to the next level.Tri-Fin Colors: Red, Blue, White, Green, Yellow, Bamboo Veneer, Tapa Fabric. Available at Upright Sports4193 Carpinteria Ave., Carpinteria(805) 318-1SUP (787)[email protected]

WAHL SURFBOARDSShaped by PJ Wahl

The Quest5’9” x 19 1/4” x 2 3/8”Designed for waist to two feet overhead. It’s a shorter board that has rails that can hold in and a full concave for speed. Should be 2 to 3” inches shorter and a little wider than your normal short board.

www.wahlsurfboards.com [email protected]

SUP HOE NALU HAWAII Upright Sports Mano Series SUPAvailable in 9’ x 30”, 9’6” x 31”, 10’ x 31 ½”, 10’6” x 32”, 11’ x 32”Shown: 9’6” Bamboo Veneer.The Mano SUP is an excellent all-around board for surfing and open water paddling. The wide shape allows for a stable ride while the pintail design is great for smooth turns on waves of all sizes. Whether it’s serious surfing, fitness paddling or family recreation, this board is fun for everyone.Tri-Fin Colors: Bamboo Veneer, Green, Red, Yellow.(Quad+1 fin setup on Bamboo Veneer 9' and 9'6" sizes.)

Available at Upright Sports4193 Carpinteria Ave. #10, Carpinteria(805) 318-1SUP (787)www.UprightSports.com

PROGRESSIVE SURFBOARDSShaped by Dave Johnson

The Daily Bread 5’8” x 13 ¼” x 20 ½” x 15 ¾” x 2 ½” Let’s face it; 340 days of the year the waves are a foot overhead and less. This board is designed to maximize performance for every day use. The same thin performance rails and deep single/double concave are combined with a wider but still curvy outline and some extra hidden thickness that result in effortless speed and greatly increased wave count. Ride 4”- 6” shorter and it fits in some very tight spaces while still catching waves better than your good wave board. Grab one of these and you’ll be “that guy” on a daily basis.

www.progressivesurfboards.com286 S. Fairview, Goleta(805) 967-1340


www.DEEPZINE.com 67

SUP TROPICAL BLENDS Shaped by Jim Hayes

Nui Loa 11’9” x 32” x 4.5” Volume: 216LSimply plenty big enough! Both wide and long, a combination that gives the Nui Loa graceful glide with tons of stability. Perfect for the rider looking to get started in the waves and or a young family with little ones. Good from novice to experienced SUP surfer.DESIGN: Slight double concave through the middle for stability and lift,ample tail rocker, tight but forgiving rails to help in the surf and the perfect outline to make this a great paddler.FIN SETUP: 2 + 1CONSTRUCTION TECHNOLOGIES: Epoxy PVC Sandwich

SUP TROPICAL BLENDS Shaped by Jim Hayes

Kane10’6” x 30” x 4.25”Volume: 155LThe Kane was built for the guys that keep taking their wife’s Wahine out. We applied more manly man graphics, added a couple more fin boxes for surf options and changed the name. Both the Kane and the Wahine provide great all around performance. Whether venturing from point to point, exercising in the flats or heading straight for the surf, you can’t go wrong with either board.DESIGN: Single to double concave through the middle for stability and lift, ample tail rocker, a tight rail line and foil to help ion the surf, a little more relaxed rocker and the perfect outline for stability and maneuverability.

FIN SETUP: 2 + 1, Quad, Twin with TrailerCONSTRUCTION TECHNOLOGIES: Epoxy PVC

HANDPLANESWESTSIDE BOARDS Shaped by Adam West

Little Rincon 14”x 7”x ½” Diamond tail. Best in medium to large waves. H and shaped with rocker in the nose and tail.

Solimar 17”x 7 3/8”x 3/8” Swallow tail. Designed to be an all around handplane. Performs well in all types of waves.

The Dredge 10 ½”x 7 ¼”x ½” Moon tail. Deep channels through the middle as well as rocker in the nose allows for better steering on big hollow waves.

Eco friendly handplanes. Every wave is over head. Custom Boards Available.

westsideboards.com [email protected] (805) 628-2062

Available at www.neverboard.com

SUP TROPICAL BLENDSShaped by Jim Hayes

Holo Nalu9’0” x 33” x 4.5” Volume: 149LImagine a 9’ board that can handle all the kids, the dog, anyone coming over for a visit and give you a level of comfort you can fish from. That’s asking a lot from a stand-up-paddle board but the Holo Nalu promises to deliver. Light weight, compact stability, contoured bottom and dimensions all aimed at a family oriented first time user. And it surfs really well too! Could be your first favorite board.DESIGN: Single to double concave through the middle creating lift and stability, a little more relaxed rocker and the perfect outline for a wide range of conditions.

FIN SETUP: 2 + 1, Quad, Twin with TrailerCONSTRUCTION TECHNOLOGIES: Epoxy PVC



MEET YOUR CENTRAL AND SOUTH COAST SHAPERS


Craig Angell / Craig Angell SurfboardsWith 20 years of shaping under his belt, Craig Angell has been a top surfer and sought after shaper in our area for many years. His rich knowledge of surfboard design and impressive skills combine to produce beautiful, high performing surfboards. Craig’s models range from shortboards to his fine classic noseriders.

Dave Johnson / Progressive Surfboards Dave Johnson is the most accessible full time master shaper in the Santa Barbara area today. “Whether they are high performance contest surfers, recreational, or beginners I love talking to the customers to arrive at a perfect fit.” Custom boards are usually done in two weeks or less.

Adam Davenport / Davenport Surfboards Surfing since the age of 8, and shaping since 2003, Davenport has been trained by Scott Anderson, Brian Hilbers, Tyler Hatzikian and Michael Geib. Leaning towards traditional longboards, his boards are a work of art and style.

Rick Avant / Ancient Art SurfboardsI fell in love with surfboards as a grommet at 17th Street Surf Shop in Virginia. Around 1997 I began to experiment with 70 ‘s single fins, fishes, and 60’s logs. A lack of these type of boards in a modern more progressive style led to me picking up a planer. With the help of pictures and videos I taught myself the craft of shaping. In 2001, Ancient Art Surfboards was born. My designs are heavily influenced by yacht ‘s and the concepts of Terry Fitzgerald, George Greenough, and Rick Stoner.

Jason Kline / Third World Surf Co.Jason Kline has been handshaping surfboards on the Central Coast for 14 years. He is a licensed civil engineer and world traveler who enjoys shaping and painting anything and everything for the surfing world. At Third World Surf Co., they make modern shortboards, retros, logs and hybrids of all shapes and colors. “We highly encourage travel to hard to reach places and can advise you on what board to bring where.” Visit the website, email or call Kline to discover over 50 different models to choose from! “We look forward to hearing from you!”

Jeff Hull / Resist Surfboards10 years ago Jeff Hull began building boards in Ventura as a hobby in his parent's garage. Slowly growing a business, and three factories later, making surfboards has developed into a career. He is thankful that he is able to do what he loves and stay committed to the board building industry. Throughout the years he has been able to diversify the company with the glassing portion of the business. He has had the pleasure of working closely with Ventura and Santa Barbara shapers providing them with quality glass work.

John Bohning / Bohning Surfboards In the vain of backyard shapers of the ‘50s, Bohning Surfboards, aka Skunkworks, is that on steroids. Emphasis on cutting edge individual performance and CAD technology. Bohning Surfboards is straight up not concerned with big corporate hype of our current era, but rather crafting high performance foils for surfers who know what they like, surfers with a interest in knowing, and not afraid to hone their individual style.

John Lessing / Doug Roth SurfboardsDoug Roth Surfboards began in Goleta, California in 1963 and were prevalent in local lineups throughout the 1960’s. The legacy is reborn with a new line of boards shaped by John Lessing that honor the Doug Roth name, his legend and the rich history of Goleta surfing.

Bill “Blinky” Hubina / William-Dennis SurfboardsBlinky got involved with Tom Morey’s’ Australian Surfboards and Morey Surfboards in 1962. In 1963 he was Morey Pope’s first employee. In 1964 after the Morey Invitational Noseriding contest, Blinky and fellow employee Bill Delaney invented Slip Check, a wax substitute. Then, in 1967 Blinky & Dennis Ryder started the their own brand of surfboards calling it William Dennis Surfboards. Now, at almost 69 years old and 45 years of shaping, Blinky is still shaping the William Dennis surfboards.

Malcolm Campbell / Campbell BrothersI began shaping in 1968. In 1970-71 my father, my brother Duncan, and I created the highly influential Bonzer. See bonzer5.com for details. I have signed PEACE on every board since 1973. Advocating for social, economic and environmental justice is of primary importance to Duncan and I. Keep surfing and ‘Be Mindful’.

Gabriel Loyd / Loyd SurfboardsGabriel Loyd, born in San Luis Obisbo and raised in Arroyo Grande. Basically grew up in a surfboard factory and has been shaping for himself for the last nine years, full time. Dedicated to making the best boards that he can and of the highest quality. “I treat every customer equally. Really stoked on designing kiteboards and boards for riding the barrel.”

Greg Iler / Eclipse SurfboardsMy next-door neighbor received a new Spindrift Surfboard for Christmas when I was a kid, our crew surrounded this sleek fiber glassed surf craft in his garage with amazement. (Hands down the best present ever). From that point on I got involved with surfboards on all levels. The beauty of shaping and surfing in this area is the diversity of quality waves along our coast, a great history of ingenuity and craftsmanship and a high level of talented surfers that put the boards we make to the test.

PHOT

O: PA

UL G

REEN

E


www.DEEPZINE.com 69

Ray Lucke / R. Lucke SurfboardsRay Lucke shaped his first surfboard when he was in high school. My parents were nice enough to let me work inside their garage and get resin all over the floor. My first job was at Rick Surfboards in 1973 as a fin foiler. I also worked for other named shops like South Shore, Fibercraft, and Dewey weber.

Bill Stewart / Stewart SurfboardsFor over four decades Bill Stewart has been creating one of a kind custom surfboards. In 1984, Stewart developed the Hydro Hull. That same year he invented the 2+1 tri-fin configuration. In 2011 Stewart further refined the Hydro Hull design to create the Redline 11.

John H. Roddenberry / JHR SurfboardsBorn, raised, and lived in Carpinteria for 32+ years. Last 10 years I’ve been bouncing around Coastal Ventura County. Started shaping and glassing in 1991, 22 years ago. Very happily married with a son and daughter. Favorite wave: Rincon Point. Favorite after surf food: Anything my wife cooks and a cold beverage. Quirky Fact: Most people don’t know I am also a licensed painting contractor.

Max McDonald / Max McDonald SurfboardsWith over 45 years of shaping experience with brands like Infinity and Bruce Jones, McDonald is most known for the Bonzer 5-fin design. He left his home in San Clemente for the long, right-hand point breaks of Santa Barbara and has been here ever since.

Shane Stoneman / Shane Stoneman SurfboardsShane Stoneman shapes out of a barn in the hills of Cayucos. Surrounded by cows and rolling hills, his shaping room is his sanctuary and has a rootsy, slightly monkish, vibe. His surfboard designs reflect the years he has dedicated to surfing and shaping excellence with an emphasis on high performance, quality, and high value. Along the way, Stoneman has endeavored to better himself at other pursuits as well—impressionist oil painting, music recording, songwriting, yoga, fishing, fatherhood, and gardening. His boards and other wares can be found at www.shanestoneman.com.

Dennis Ryder / Dennis Ryder Surfboards Dennis Ryder’s shaping career was birthed in 1967 when he was hired to do boards for the famed Ventura based Morey-Pope Co. Dennis and Bill Hubina founded William-Dennis Surfboards, and while living on Kauai he shaped for Hawaiian Blades and Dick Brewer.He has been transforming concept to reality for over 45 years. He is one of a rare few remaining master surfboard craftsmen in the sport who still ply their trade on a daily basis.

Sean O’Connor / Revolution HardwareI was born and raised in Southern California, moved to the area to attend UCSB, and after serving six years in the Marine Corps, I decided to stay in Santa Barbara. I eventually met up and befriended Max McDonald and the two of us teamed with Doug Yartz and started shaping boards for Revolution Hardware.

PJ Wahl / Wahl Surfboards PJ Wahl has been shaping surfboards on the Central Coast since 1968. Using his shaping & wave knowledge he is able to work with the surfer to make a custom board that works for them.

Cory Scrivner / Scrivi SurfboardsScrivner started Scrivi Surfboards when Port Hueneme lost its shapers. Hand shaping is quickly becoming a lost art, so with a nod to Hueneme/Oxnard shapers Butch Towers (Towers Surfboards) and Kevin McClelland (Soul Octopus), he focuses on the art of hand-shaping custom boards with a hyper-focus on bottom contours. From big Oxnard beach breaks, rippable point breaks, to big Hawaii, the feedback has been positive. Support your local shapers!

Wayne Rich / Wayne Rich DesignsTaking surfboard shaping and design to the highest possible level is something I take very seriously. To take the art and craft of creating real wave-riding foils with specific purpose and feel is a life goal. Working with people to formulate concepts, then develop and apply them to diverse styles of surfers and wave conditions throughout the world is a great challenge and never ending learning experience.

Robert Weiner / Roberts SurfboardsRobert Weiner started shaping Roberts Surfboards in 1996 with his main goal being to create high caliber, high quality surfboards that will push the envelope of our spots. Robert has grown from its roots in Ventura to become one of the most popular labels in Southern California. Japan and the East Coast. He recently won the 2011 Shaper of the Year award from Surfing Magazine.

Matt Sparks / M.d.s* Surfboards Matt Sparks is a lifelong surfer with over a decade of surfboard shaping experience under his belt. Matt has put in his time, gaining experience from custom orders as well as shaping for respected local companies. Whether it’s a High Performance thruster, noserider, SUP, or anything in between, M.d.s.* Surfboards will take care of you.

X-DryAAN ULTRA-LIGHTWEIGHT COMPOSITE MATERIAL COMPRISED OF AN “X” CHAIN OF HOLLOW STRUCTURED FILAMENTS WITH SUPERIOR HEAT RETENTIVE PROPERTIES

ENGINEERED FROM THE INSIDE OUT PHOT

O: N

ELLY

// R

IDER

: JAM

IE O

BRIE

N

guide: deep surf magazine_2013 board buyers guide

Documents

venturas bill blinky

surfing family tree

surf products

surf crafts

board character

veteran surf legend

ventura surf shop

real board