Guide to Installing CWM.Warning: Im not responsible for any failed flash or bricked phones, it is your own free will of doing this.

Download the following at the files section of this group:

1. 780135_7675_V2058.zip (Official Cherry Rom 2058 with ClockWorkMod recovery)2. NvMultiDown.rar 3. Root.zip (copy this to the main of your sd card)Extract 780135_7675_V2058.zip to c:\ drive on your computer

Your Rom is now ready to be flash on your phone using NvMultiDown.AP software update manualExtract all files to C:\NvMultiDownI. Install drivers1 run the vcredist_x86.exe to install the software runtime.It is under the directory (C:\NvMultiDown\vcredist_x86\)2 insert the battery in the phone, press the up volume key and power on key concurrently. Release the keys after you get the green screen, then you will get a black screen, at this time, plug in the USB cable. You will get following indications on the pc.

Snapshot 13choose the second (advanced) option, then you will get the following popup screen.

Snapshot 24press the Browse button, find the directory folder (usbpcdriver) C:\NvMultiDown\usbpcdriver and then press next button to start install the drivers:

Snapshot 35After a few seconds, it will be finished.

Snapshot 46To make sure that you have installed the drivers correctly, go to the device manager, try to findNVDIA USB Boot-recovery driver for Mobile devices, just as the following

Snapshot 5II. NvMultiDown1 Run the NvMultiDown.exe (C:\NvMultiDown\NvMultiDown)

Snapshot 62 Press the buttonOnce the program is running On the right side select the 780135_7675_V2058updatefolder

3. Uncheck the 2 boxes below the file location. (if they are checked.)

4. Remove the USB cable and Battery then Insert the battery in the phone, press the up volume key and power on key concurrently, then plug in the USB cableif you got the blue rectangle, it start to download

Snapshot 85. It will tack about 2 minutes to finish the downloading, if it is successful, you will get a green rectangleSnapshot 10If you got a red rectangle, it is telling us that the upgrading is failed.

ROOTING GUIDEAfter Successfully flashing the Software, you can copy Root.zip to your sdcard (you can use your cable or card reader) then turn off your phone and unplug cable.

hold vol + and power until the screen appears red, then quickly drop 2 fingers hold out, we will see the phone boot up the screen has the following inscription:-Reboot system now-Apply update from sdcard-Wipe data / factory reset-Wipe cache partition-Install zip from sdcard-Backup and restore-Mounts and storage-Advanced-Power off

To navigate press volume up and down. To enter or choose press power button.1. Choose Install zip from sdcard

2. Choose zip from sdcard

3. Find ypur Root.zip from your sdcard and press the power button.

When successfully flashed you can now reboot your phone and thats it you are now rooted. You will now have Superuser on your drawer (apps menu).

Thank you

Admin

Christian MontesFacebook Magnum 2x GroupRev. 2.0Credits to Android Forums for the Guide and Cherry Mobile.