gurit product cataloguehec 200 400 35 2dpe 200 80 160 pp53-5948 standard hec 300 400 35 popa 150 60...

GURIT PRODUCT CATALOGUEEurope, Middle East and Africa

[email protected]

www.gurit.comVersion 31 - December 2019

Cover photo credits: ©Charal Sailing Team, Danish Yachts

Gurit EMEA Product Catalogue 1 GPC_EMEA_31_1219

Introduction to Gurit

Gurit is a leading global manufacturer of advanced composite materials and engineering. Gurit

integrates structural design, materials science and process engineering to offer a complete turnkey

composite solution.

Gurit is specialized on the development and manufacture of advanced composite materials. The

comprehensive product range comprises fibre reinforced prepregs, structural core products, process

coats, adhesives, resins and consumables. Gurit supplies global growth markets with composite

materials, composite tooling equipment, core material wind turbine blade kits, and structural

engineering. Gurit operates production sites and offices in Canada, China, Denmark, Ecuador,

Germany, Hungary, Indonesia, India, Italy, Mexico, New Zealand, Poland, Spain, Switzerland, Turkey,

United Kingdom and the United States.

This catalogue covers Gurit’s Composite Materials Business Unit, providing a comprehensive range

of core, formulated and prepreg materials.

How to use this Product Catalogue

This catalogue provides information on our core, prepreg, fire retardant and formulated product

portfolio of the Composite Materials Business Unit. Products from the Aerospace, Tooling and Kitting

Business Units are not covered in this catalogue.

Each individual product code is categorised as one of the following

Gurit is well served by a network of representatives, who hold stocks of Gurit products locally, and

who acts as a local point of contact for technical information and sales. A list of these representatives

is given at the end of this publication.

Brief descriptions of each product and product group are given throughout to facilitate product

selection, with full information on any product obtainable from the relevant technical datasheet. These

are available on the Gurit website, www.gurit.com, or by contacting customer support. Contact details

for customer support are given at the end of this publication.

The product catalogue structure is given in the contents page. For placing orders, contact details can

be found at the end of this product catalogue. Please use the order codes provided to ensure that you

obtain the correct products.

Some Gurit products are subject to export control restrictions and destinations subject to

trade restrictions. Please contact your local Gurit Customer Support office for details.

ESSENTIALS = manufactured to stock – target dispatch within 3-5 days depending on volume

STANDARD = manufactured to order – target dispatch within 4 weeks depending on volume

SPECIALIST = please contact your local customer support team for product availability

A/F = packaging suitable for air freight For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.


Contents

Prepreg & SPRINT™ Materials ................................................................................ 3

Fibre Definitions of HEC, IMC, HMC and UHMC ............................................................................ 4

Low Temperature Curing Prepreg & SPRINT™ Materials ............................................................ 5

Performance Prepreg & SPRINT™ Materials .................................................................................. 7

High Performance Prepreg Materials .............................................................................................. 12

Aerospace Qualified Prepreg Materials .......................................................................................... 15

Industrial Prepreg & SPRINT™ Materials ...................................................................................... 16

Prepreg & SPRINT™ Ancillaries ..................................................................................................... 18

Fire Retardant Materials ........................................................................................ 22

Laminating Systems ........................................................................................................................... 23

SPRINT™ Systems ........................................................................................................................... 23

Prepreg Systems ................................................................................................................................ 24

Resin Films .......................................................................................................................................... 24

Surface Films ...................................................................................................................................... 24

Core Materials ........................................................................................................ 25

Introduction .......................................................................................................................................... 25

Forms of Supply ................................................................................................................................. 26

Core Materials Range ........................................................................................................................ 28

Core Kitting .......................................................................................................................................... 31

Spabond™ Adhesive Systems .............................................................................. 32

Spabond™ 300 Series ...................................................................................................................... 33

Spabond™ 500 Series ...................................................................................................................... 36

Spabond™ 700 Series ...................................................................................................................... 39

Spabond™ 800 Series ...................................................................................................................... 39

Liquid Systems ....................................................................................................... 40

AMPRO™ Multi-Purpose Systems .................................................................................................. 41

Legacy Multi-Purpose Systems........................................................................................................ 46

Ampreg™ Laminating Systems........................................................................................................ 49

PRIME™ Infusion Systems .............................................................................................................. 52

Filled Systems ........................................................................................................ 54

Filling and Fairing ............................................................................................................................... 55

In-Mould Process Coats .................................................................................................................... 56

Tooling Systems..................................................................................................... 57

Reinforcements ...................................................................................................... 59

Ancillary Products.................................................................................................. 63

Contact .................................................................................................................... 66

ESSENTIALS= manufactured to stock target dispatch within 5 days STANDARD

= manufactured to order target dispatch within 4 weeks SPECIALIST

= please contact your local office for product availability

For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.


Prepreg & SPRINT™ Materials

Gurit’s track record of supplying out of autoclave prepregs to the wind energy &

marine industries has allowed Gurit to lead the way by introducing the next

generation of prepregs, specifically designed to make large composite component

manufacture faster, easier and cost-effective.

Prepreg Materials

Pre-impregnated materials (prepregs) are reinforcement fibres or fabrics into which a pre-

catalysed resin system has been impregnated by a machine. The resin systems in these

materials react very slowly at room temperature, giving rise to working times of many days or

months. Prepreg resins can only be fully cured by heating them to the prescribed cure

temperature. The accuracy of the machinery used to combine the fabric or fibre with the

resin ensures that laminates produced from prepregs have more consistent and higher fibre

contents than can be achieved by wet lay-up techniques. This allows the use of very tough,

strong resin systems that would be too high in viscosity to be impregnated by hand.

SPRINT™ Materials

SPRINT™ materials consist of a layer of fibre reinforcement either side of a pre-cast, pre-

catalysed resin film with a very lightweight tack film on one face. The material therefore has

the appearance of dry reinforcement, which has resin concealed at its centre. SPRINT™

materials are produced by a process that differs from conventional prepreg so that the fibres

in the reinforcements remain dry and un-impregnated by the resin. SPRINT™ materials are

laid up in a mould and vacuum bagged as for conventional prepreg. However, when the

vacuum is applied, the air transport properties of the dry reinforcement enable air trapped in

the fibre bundles and between layers to be easily removed. When the temperature is then

raised for the cure, the resin film softens and flows into the air-free reinforcement. The void

content of the resultant laminate is extremely low (typically 0-0.5%).

PR

EPR

EG P

REP

REG






Fibre Definitions of HEC, IMC, HMC and UHMC

Fibre Description Strength (MPa) Modulus (GPa)

HEC High Elongation Carbon > 4000 227 to 257

IMC Intermediate Modulus Carbon > 4400 275 to 310

HMC High Modulus Carbon > 4300 365 to 405

UHMC Ultra High Modulus Carbon > 4000 420 to 455

Bespoke products are available for high-volume custom applications, where specific

variants of width, resin content, fibre weight, tack levels and backers can be

requested. For specific enquiries please contact your local customer support

representative.

Gurit prepreg product formats are described as one of the following:

1PA – single release paper applied to one side only

1PO – single poly backer applied to one side only

POPA – one poly backer and one paper applied to either side

2DPE – two poly backers applied to each side

S/S – single sided SPRINT™ product

/XXXX – the 2nd reinforcement used in a double sided SPRINT™ e.g. /XC305

/CM – manufactured for cosmetic applications

PR

EPR

EG P

REP

REG






Low Temperature Curing Prepreg & SPRINT™ Materials

Gurit’s range of low temperature curing prepregs have been developed to allow for the use of cost-effective tooling solutions in the construction of large components.

Product Selector

Format System Main Features Fastest

Cure Recommended Processing Method

Max Tg1 Typical Applications

Prepreg SE 70 ¬ Curable at 70°C in thick sections

¬ Available in SPRINT™ and prepreg formats

¬ Range of compatible 70°C curing products

25 mins at 120°C

¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging

126°C

Sandwich structures with honeycomb, foam and balsa cores

SPRINT™ ST 70

SE 70

SE 70 is a family of hot melt, low temperature (70ºC) cure, epoxy prepreg systems. They

have been developed for use in the construction of large components using low energy cure

cycles, and have an out-life of 28 days at 21°C. Excellent properties can be achieved at this

cure temperature, particularly compressive and interlaminar shear strengths.

ST 70

This is a low temperature (70ºC) cure, SPRINT™ system. Developed for use in the

construction of large components using low energy cure cycles, it has an out-life of 21 days

at 21°C. Excellent properties can be achieved at this cure temperature, particularly

compressive and interlaminar shear strengths. ST 70 is DNV-GL approved for some glass

and carbon products. Please contact your customer support representative for more

information. P

REP

REG

PR

EPR

EG






Code Selector

Low Temperature Curing Prepreg

SE 70 Reinf. Wt

(gsm) Width (mm)

Resin Content (%)

Format Length

(lm) Quantity

(m2) MOQ (m2)

Order Code Availability

Unidirectional High Elongation Carbon (HEC)

HEC 200 400 35 2DPE 200 80 160 PP53-5948 STANDARD

HEC 300 400 35 POPA 150 60 120 PP53-4165 SPECIALIST

HEC 300 400 35 2DPE 150 60 120 PP53-6104 STANDARD

Woven High Elongation Carbon (HEC)

RC200T 194 1270 38 2DPE 50 63.5 63.5 PP13-5944 STANDARD

RC416T 416 1270 40 1PO 40 50.8 50.8 PP13-4473 SPECIALIST

Stitched Multi-axial High Elongation Carbon (HEC)

XC411 410 1270 42 2DPE 40 50.8 50.8 PP23-5716 STANDARD

Peel Ply

NPP80 80 1000 50 1PA 100 100 100 PP15-4245 SPECIALIST

Resin Film

SE 70 Film 0 1270 100 No Carrier 150 190.5 190.5 PP00-5809 SPECIALIST

Low Temperature Curing SPRINT™

ST 70 Reinf.

Wt (gsm)

Width (mm)

Resin Content

(%) Format

Tack Film

Length (lm)

Quantity (m2)

MOQ (m2)



RC416T 416 1270 42 S/S No 100 127 127 SA13-4493 STANDARD

RC416T 416 1270 42 S/S MET STL No 100 127 127 ST13-7092 SPECIALIST

RC303T/RC303T 600 1270 42 F/S POPA Yes 15 19.05 57.15 SA13-4555 SPECIALIST


XC411 410 1270 42 S/S No 25 31.75 31.75 SA23-4494 SPECIALIST

Stitched Multi-axial E-Glass

QE1200 1200 1200 42 S/S No 10 12 60 ST21-5613 SPECIALIST

QE1174 1174 1270 42 S/S No 150 190.5 190.5 ST21-5395 SPECIALIST


WRE581T 580 1250 48 S/S No 100 125 TBC ST11-5631 SPECIALIST

PR

EPR

EG P

REP

REG






Performance Prepreg & SPRINT™ Materials

Gurit’s range of performance prepregs provide a good balance of mechanical thermal and performance with flexible curing options.

Product Selector



Max Tg1

Typical Applications

Prepreg SE 84LV

¬ Versatile high-strength prepreg system

¬ Curable at 80°C in thick sections

60 mins at 120°C


115°C

High performance light-weight, high-stress structures – round the world yacht hulls and decks

SPRINT™ ST 94

¬ Drape and tackiness optimised for excellent handling

¬ Ideal for complex or vertical mouldings

¬ Excellent balance of mechanical performance and toughness

45 mins at 120°C


115°C

Ideal for large structures where heavyweight materials need to remain in the mould for long durations prior to curing

SPRINT™ ST 95

¬ Good balance of mechanical properties

¬ Dry fabric resin infusion enables efficient air evacuation

¬ Toughened – resistant to micro-cracking

60 mins at 120°C


125°C High volume industrial grade toughened SPRINT™ material

SE 84LV SE 84LV is an exceptionally versatile hot-melt, epoxy prepreg, it can be cured at

temperatures as low as 80°C, or it can be used for faster moulding of components at 120°C.

This is achieved with an extremely good out-life of up to 56 days at 21°C. SE 84LV is a

tough system, and offers excellent mechanical properties on a wide variety of reinforcing

fabrics and fibres.

ST 94 ST 94 is a toughened SPRINT™ system offering a good balance of mechanical properties. It

comprises of a single layer of reinforcement fabric plied against a resin filmed paper. The

resin film has a medium tack that makes it ideal for vertical surface applications. Although

moderately tacky, ST 94 can be repositioned once in place without disturbing the underlying

single SPRINT™ layers.

ST 95 ST 95 is a toughened SPRINT™ system that offers an extremely good balance of

mechanical properties. With a minimum cure temperature of 85°C (with a suitable post-

cure), it is ideal for structural components where improved performance and resistance to

micro-cracking is desired. ST 95 resin matrix has good flow resistant characteristics that

make it stable at room temperature (21°C). The product has a light tack on one side which

aids placement in a mould tool. For details of cure schedules, please refer to data sheet.

PR

EPR

EG P

REP

REG






Code Selector

Performance Prepreg

SE 84LV Reinf. Wt

(gsm) Width (mm)

Resin Content (%)

Format Length

(lm) Quantity

(m2) MOQ (m2)



HEC 150 400 37 POPA 200 80 160 PC53-4161 SPECIALIST

HEC 200 400 37 POPA 200 80 160 PC53-4160 STANDARD

HEC 300 400 35 POPA 150 60 180 PC53-4163 ESSENTIALS


HEC 300 1200 37 2DPE 40 48 48 PC53-6473 SPECIALIST



HEC 450 400 35 POPA 100 40 80 PC53-4159 STANDARD


Unidirectional Intermediate Modulus Carbon (IMC)

IMC 150 400 35 POPA 150 60 160 PC53-1725 SPECIALIST

IMC 150 400 35 2DPE 200 80 160 PC53-6185 SPECIALIST

IMC 200 300 37 POPA 250 75 150 PC53-5635 STANDARD

IMC 300 400 35 POPA 150 60 120 PC53-2306 ESSENTIALS



Unidirectional High Modulus Carbon (HMC)

HMC 150 400 35 POPA 200 80 160 PC53-1807 SPECIALIST

HMC 150 400 32 2DPE 200 80 160 PC53-5581 STANDARD

HMC 300 400 35 POPA 150 60 120 PC53-1808 STANDARD

HMC 300 400 37 2DPE 150 60 120 PC53-4579 STANDARD

HMC 300 400 33 POPA 150 60 120 PC53-5690 STANDARD

PR

EPR

EG P

REP

REG





Gurit EMEA Product Catalogue 9 GPC_EMEA_31_1219GPC_EMEA_31_1219

SE 84LV Reinf. Wt

(gsm) Width (mm)

Resin Content (%)

Format Length

(lm) Quantity

(m2) MOQ (m2)



RC200T 194 1270 42 1PO 50 63.5 63.5 PC13-2646 ESSENTIALS

RC200P 200 1270 42 1PO 50 63.5 63.5 PC13-5801 SPECIALIST

RC303T 300 1270 42 1PO 35 44.45 88.9 PC13-2710 SPECIALIST

RC416T 416 1270 40 1PO 25 31.75 63.5 PC13-2682 ESSENTIALS

RC660T 660 1270 43.5 2DPE 20 25.4 50.8 PC13-4849 STANDARD


XC150 154 1270 40 1PO 75 95.25 95.25 PC23-5252 SPECIALIST

XC305 305 1270 41 1PO 50 63.5 63.5 PC23-4362 STANDARD

XC305 305 1270 39 2DPE 50 63.5 63.5 PC23-5931 SPECIALIST

XC411 410 1270 40 2DPE 30 38.1 76.2 PC23-5708 STANDARD

XC411 410 1270 40 1PO 30 38.1 76.2 PC23-1738 ESSENTIALS

Woven E-Glass and Aramid

RE50P 47 1270 45 POPA 100 127 127 PC11-6514 SPECIALIST

RE100H4 105 1200 38 2DPE 100 120 120 PC11-6686 SPECIALIST

RE165T 160 1270 56 POPA 60 76.2 76.2 PC11-6771 STANDARD

RE295 292 1240 39 1PO 50 62 62 PC11-4005 STANDARD

RE301H8D 300 1270 40 POPA 25 31.75 63.5 PC11-5901 SPECIALIST

REA390S 390 1200 39 1PO 50 60 600 PC11-1741 STANDARD


XE603 606 1250 36 1PO 25 31.25 62.5 PC21-1747 SPECIALIST

XE905 942 1270 35 1PO 15 19.05 57.15 PC21-1748 SPECIALIST

Peel Ply

NPP80 80 1000 50 1PA 100 100 100 PC15-1744 ESSENTIALS

PR

EPR

EG P

REP

REG






Performance Single Sided SPRINT™

ST 94 Reinf.

Wt (gsm)

Width (mm)

Resin Content (%)

Format Tack Film

Length (lm)

Quantity (m2)

MOQ (m2)



RC200T 200 1270 42 S/S No 100 127 127 SR13-6001 STANDARD

RC200T 200 1270 42 S/S No 50 63.5 63.5 SR13-2880 SPECIALIST

RC303T 300 1270 42 S/S No 30 38.1 76.2 SR13-2845 STANDARD



RC416T 416 1270 42 S/S No 100 127 127 SR13-7149 STANDARD




XC305 305 1270 42 S/S No 100 127 127 SR23-6829 SPECIALIST

XC411 410 1270 42 S/S No 25 31.75 63.5 SR23-3134 STANDARD

XC411 410 1270 42 S/S No 100 127 127 SR23-7150 STANDARD

XC611 615 1270 40 S/S No 125 158.75 158.8 SR23-5358 SPECIALIST

XC611 615 1270 42 S/S No 20 25.4 50.8 SR23-7126 SPECIALIST

QC800(HEC) 800 1270 40 S/S No 49 62.2 62.2 SR23-6910 SPECIALIST

Woven E-Glass

RE301H8 300 1270 35 S/S No 25 31.75 63.5 SR11-5877 SPECIALIST

RE400T 390 1250 52 S/S No 25 31.25 62.5 SR11-5820 SPECIALIST

RE400T 390 1250 35 S/S No 25 31.25 125 SR11-7002 SPECIALIST

WRE581T 580 1250 41 S/S No 25 31.25 123.8 SR11-6932 SPECIALIST

WRE581T 580 1250 33 S/S No 25 31.25 62.5 SR11-3219 SPECIALIST

WRE850T 850 1250 35 S/S No 16 20 60 SR11-5431 STANDARD

Stitched Multi-axial Glass and Aramid

XA450 465 1270 46 S/S No 20 25.4 50.8 SR22-5298 STANDARD

XE603 606 1255 35 S/S No 60 75.3 75.3 SR21-7062 SPECIALIST

XE603 606 1255 48 S/S No 150 188.25 188.3 SR21-4558 STANDARD

XE603 606 1255 35 S/S No 60 75.3 75.3 SA21-2748 STANDARD



QE600 600 1200 33 S/S No 50 60 60 SR21-2518L SPECIALIST



Resin Film

ST 94 Film 0 1160 100 Resin Film No 100 116 116 SR00-6124 STANDARD

PR

EPR

EG P

REP

REG






Performance Double Sided SPRINT™

ST 95 Reinf.

Wt (gsm)

Width (mm)

Resin Content

(%) Format

Tack Film

Length (lm)

Quantity (m2)

MOQ (m2)

Order Code

Availability


RC303T/RC303T 600 1270 51 F/S Yes 15 19.05 57.15 SL13-2878 STANDARD

RC416T/XC305 721 1270 52 F/S Yes 13 16.51 66.04 SL23-4384 STANDARD

RC416T/XC305 721 1270 42 F/S POPA Yes 100 127 127 SL23-6509 STANDARD

RC416T/XC411 826 1270 52 F/S POPA Yes 100 127 127 SL23-6511 STANDARD

RC416T/XC411 826 1270 42 F/S POPA Yes 100 127 127 SL23-6964 SPECIALIST

RC416T/XA450A 881 1270 48 F/S Yes 12.5 15.875 63.5 SL22-3775 STANDARD


+45C2/-45C2 422 1270 42 F/S POPA No 30 38.1 800.1 SL43-2057 STANDARD

+45E3/-45E3 600 1270 42 POPA Yes 18 22.86 68.58 SL41-3199 STANDARD


RE301/RE301 592 1270 36 F/S POPA Yes 15 19.05 57.15 SL11-2891 SPECIALIST

RA320/RA320 640 1270 45 F/S POPA Yes 15 19.05 57.15 SL12-5300 SPECIALIST

WRE581T/ WRE581T 1160 1250 41 F/S POPA Yes 100 125 125 SL11-2560L STANDARD

PR

EPR

EG P

REP

REG






High Performance Prepreg Materials

Gurit’s range of high performance prepregs offer exceptional benefits for a wide range of applications from rapid component manufacture to high-end cosmetic finishes.

Product Selector



Max Tg1


SPRINT ST110 ¬ Car Body Panel

System SPRINT Resin

30 mins at 130°C

¬ Autoclave ¬ Vacuum Bag

115°C

Body and closure panels for automotive applications

Prepreg SC 110(T2)

¬ White spot free high clarity resin for cosmetic parts

¬ Versatile, high strength prepreg resin system

¬ Flexible cure as low as 80°C

20 mins at 150°C

¬ Autoclave ¬ Press Moulding

125°C

Ideal for high visual quality components without white-wash or white spots

Prepreg SC 160

¬ Class leading resin clarity

¬ High temperature performance

15 mins at 160°C

¬ Autoclave ¬ Press Moulding

180°C Suitable for use in high temperature applications

Prepreg Smartcure™

¬ Rapid cure in less than 5 minutes

¬ Ideal for Hot-in Hot-out press moulding manufacture

5 mins at 150°C

¬ Press Moulding 175°C High volume component manufacture.

ST 110 for Car Body SPRINT™ (CBS)

Structural ST 110 is used to form a multi layered material referred to as CBS Car Body SPRINT. It is used alongside a suitable surfacing film (SF80, SF80FROBL or SF96) and SY110 Syntactic Core to build up a CBS panel. The woven carbon and glass reinforcements can be used to lay up various panel combinations to suit the required stiffness and weight targets needed.

For our range of surfacing films and syntactic core materials see Prepreg & SPRINT™ Ancillaries.

SC 110(T2)

PR

EPR

EG P

REP

REG

PR

EPR

EG P

REP

REG






SC 110(T2) is ideally suited to achieve visual surface quality. This cosmetic grade prepreg utilize a high clarity, versatile, hot-melt epoxy resin formulation. This specifically developed, unique formulation produces truly white-wash-free parts resulting in increased production output and scrap cost savings of up to 20%. SC 110(T2) can be cured at temperatures as low as 80°C or even faster cures are achievable using press moulding technologies at temperatures up to 150°C. QUV SE Accelerated Weathering Test has revealed that Gurit SC 110(T2) carbon prepreg offers superior weathering performance compared with the current market range.

SC 160

SC 160 are the first choice for perfect visual surface quality. The cosmetic grade prepregs utilize a high clarity, versatile, hot-melt epoxy resin formulation. SC 160 can be cured at temperatures as low as 130°C or even faster cures are achievable using press moulding technologies at temperatures up to 160°C. SC 160 offers class leading resin clarity for a prepreg resin suitable for use in high temperature applications of up to 160°C.

Smartcure™

Press moulding is the most common production method in the automotive industry to increase production rates for structural and body panel applications to serial production levels. Gurit is assisting this growth by offering prepreg-based products suitable for various press moulding applications. The company has developed a range of prepregs which can be supplied in diverse reinforcement formats that will offer effective deposition rates.

Gurit Smartcure™ is your fastest option for high volume press moulding production of structural automotive components. Cycle times of 5 minutes combined with preforming capability at room temperature and reduced finishing efforts result in increased production output as well as time and cost savings per part. True hot in, hot out processing of the innovative epoxy resin prepregs at steady press temperature guarantees constant part quality and energy savings combined with a good surface finish that is suitable for direct painting with various paints.






Code Selector

ST 110

ST 110 Reinf. Wt

(gsm) Width (mm)

Resin Content (%)

Format Length (lm) Quantity

(m2) MOQ (m2)



RC200T(C) 194 1270 42 S/S 50 63.5 63.5 SA13-6158 SPECIALIST

Woven E-Glass

RE400T 390 1250 42 S/S 50 62.5 62.5 SA11-6157 SPECIALIST

Cosmetic Prepreg

SC 110(T2) Reinf. Wt

(gsm) Width (mm)

Resin Content (%)

Format Length

(lm) Quantity

(m2) MOQ (m2)



RC200T 194 1270 40 2DPE/CM 50 63.5 63.5 PA13-6860 STANDARD

RC245T 245 1250 40 2DPE/CM 50 62.5 62.5 PA13-6355 STANDARD

RC245T 245 1250 38 POPA/CM 50 62.5 62.5 PA13-6975 SPECIALIST

RC380T 380 1250 40 2DPE 46 57.5 57.5 PA13-6425 STANDARD

RC400T 400 1270 40 2DPE/CM 25 31.75 254 PA13-6567 SPECIALIST

Black Pigmented (BL) Woven High Elongation Carbon (HEC)

RC200P 200 1270 40 POPA 50 63.5 63.5 PA13-7224 SPECIALIST

RC200T 194 1270 40 POPA 50 63.5 63.5 PA13-6988 STANDARD

SC 160 Reinf. Wt

(gsm) Width (mm)

Resin Content (%)


(m2) MOQ (m2)



RC200P 200 1270 40 2DPE/CM 50 63.5 63.5 PA13-6444 STANDARD

RC200T 194 1270 40 2DPE/CM 50 63.5 63.5 PA13-7012 SPECIALIST

RC245T 245 1250 40 2DPE/CM 50 62.5 62.5 PA13-6343 SPECIALIST

RC380T 380 1250 40 2DPE 46 57.5 57.5 PA13-6412 STANDARD

RC660T 660 1270 35 2DPE 20 25.4 50.8 PA13-6451 SPECIALIST


5 Minute Curing Prepreg

Smartcure Reinf. Wt

(gsm) Width (mm)

Resin Content (%)


(m2) MOQ (m2)



HEC 195 1270 39 POPA 50 63.5 63.5 PA53-6489 SPECIALIST



PR

EPR

EG P

REP

REG

PR

EPR

EG P

REP

REG






Aerospace Qualified Prepreg Materials

Advanced Composite Materials for the Aerospace Industry

Gurit has developed a broad range of strong, light and fire-retardant aerospace materials which are ideally suited for interior or structural components such as passenger and cargo floor panels, cabin linings, ceiling panels, air ducts, plenums, overhead compartments, lavatories, galleys, bars, wardrobes, partitions, seats, flap track and belly fairings, winglets and fins, landing gear doors, trailing edges and brackets.

Gurit offers four resin chemistries:

Chemistry Description

Phenolic Phenolic based chemistry is well established within the aerospace and rail industries where ultimate fire retardant, low smoke emission and low smoke toxicity (FST) properties are required. Phenolic prepregs are therefore commonly used in interior aircraft components such as side walls and flooring.

Epoxy

Gurit has a range of fire-retardant epoxy systems suitable for applications where increased mechanical properties are required. They generally exhibit good flame spread properties and can be used in more structural components compared to phenolics such as flooring panels. Where the optimum blend of FST and mechanical properties is required, Gurit epoxy prepregs also can be co-cured with phenolic prepregs. This is an established approach to the manufacture of aerospace flooring sandwich panels.

Cyanate Ester

Cyanate ester prepregs provide excellent FST properties and can be used in thermally demanding applications due to their high glass transition temperatures (>200oC). Laminates constructed with cyanate ester prepregs demonstrate very low gas permeability and are volatile-free, resulting in low void and porous free components. This together with their excellent FST and high Tg properties make them ideal for air-conditioning ducting construction in aerospace applications.

Benzoxazine

Gurit’s Benzoxazine prepregs represent the next generation of fire-retardant chemistry where similar FST properties to phenolics are required. An advantage of Benzoxazine chemistry is that it is phenol and formaldehyde free meeting the latest environmental standards. Additionally, during cure, Benzoxazine prepregs are volatile-free resulting in low void and porous-free components, therefore eliminating costly reworking processes associated with the manufacture of phenolic-based prepreg components.

For further information on product availability contact your local sales office.

PR

EPR

EG P

REP

REG






Industrial Prepreg & SPRINT™ Materials

Gurit’s range of high industrial prepreg products were developed for the cost-effective manufacture of very large structures such as wind turbine blades using heavyweight reinforcements and low-cost chemistry.

Product Selector



Max Tg1


Prepreg Sparpreg™

¬ UD prepreg ideal for thick structural sections

¬ Excellent handling & processing properties – no de-bulk

¬ Fully compatible withGurit SPRINT™ andprepreg products

45 mins at 120°C


125°C

High quality monolithic unidirectional Components that require fast single shot production in thick sections

Prepreg

WE 91-1 ¬ High tack epoxy

prepreg 45 mins at 120°C


125°C

Large Structural components such as wind turbine blade shells and shear webs

WE 91-2 ¬ Medium tack epoxy

prepreg

SPRINT™ WT 93

¬ Low tack SPRINT™ resin matrix

¬ Dry fabric enables efficient air evacuation

45 mins at 120°C


125°C

Large Structural components such as wind turbine blade shells, shear webs, spars and roots

Sparpreg

SparPreg™ is an advanced UD prepreg, developed to enable to economic manufacture of

unidirectional spar caps for more demanding spar designs. SparPreg™ is specifically

formulated to produce low void content unidirectional prepreg from vacuum bag only

processing.

WE 91-1 / WE 91-2

The WE91 prepreg product range comprises of two tack variants; WE 91-1 high tack and

WE 91-2 medium tack prepregs. WE 91 is a high flow epoxy prepreg ideally suited to

structural composite component manufacture. It can be cured at temperatures as low as

85⁰C, but can also be used for the rapid manufacture of components through its 45-minute

cure at 120°C. All of this can be achieved together with an out-life of 60 days at 21°C.

WT 93

WT 93 is a SPRINT™ resin system that can be cured at temperatures as low as 85⁰C, but

can also be used for the rapid manufacture of components through its 45-minute cure at

120⁰C. All of this can be achieved together with an out-life of 21 days at 21⁰C. WT 93 is

designed for vacuum bag processing and offers excellent mechanical performance on glass

and carbon fibre reinforcements.

PR

EPR

EG P

REP

REG






Code Selector

Sparpreg Reinf. Wt

(gsm) Width (mm)

Resin Content (%)


(m2) MOQ (m2)



HEC 600 1240 34 2DPE 120 148.8 148.8 PA53-5995 STANDARD

HEC 600 300 34 2DPE 330 99 396 PA53-5924 STANDARD

HEC 600 300 34 2DPE 100 30 60 PA53-6685 SPECIALIST

HEC 600 400 34 2DPE 110 44 132 PA53-5513 SPECIALIST

Unidirectional E-Glass (EGL)

EGL 1600 900 32 2DPE 250 225 225 PA51-4994 STANDARD

WE 91-1 Reinf. Wt

(gsm) Width (mm)

Resin Content (%)


(m2) MOQ (m2)


Unidirectional E-Glass (EGL)

EGL 1200 900 32 2DPE 307 276.3 276.3 PA51-3984 STANDARD



EGL 1600 1000 32 2DPE 219 219 219 PA51-3989 STANDARD


XE600 600 1250 35 2DPE 390 487.5 487.5 PA21-3980 STANDARD

XE600 600 1250 50 2DPE 390 487.5 487.5 PA21-3981 STANDARD

Peel Ply

NPP80 80 1200 50 0 100 120 120 SA15-6090 SPECIALIST

WE 91-2 Reinf. Wt

(gsm) Width (mm)

Resin Content (%)


(m2) MOQ (m2)



XE1000 1000 1250 48 2DPE 248 310 310 PA21-6094 STANDARD

XE603 600 245 45 1PO 125 30.625 122.5 PA21-5420 STANDARD

XE603 600 1255 45 POPA 378 474.39 474.39 PA21-4096 STANDARD

WT 93 Reinf. Wt

(gsm) Width (mm)

Resin Content (%)


(m2) MOQ (m2)



XE603 600 1255 35 S/S 105 131.775 125.5 SA21-5224 STANDARD

+45E3/-45E3 600 1270 35 1PO 250 317.5 TBC SA41-4767R STANDARD

QE1174L 1174 1270 41 S/S 75 95.25 95.25 SA21-4390 STANDARD 1Includes 50g/m2 Fleece

PR

EPR

EG P

REP

REG






Prepreg & SPRINT™ Ancillaries

To complement Gurit’s prepreg product range, Gurit also offers co-curable ancillary products including surfacing films, adhesive films, light-weight cores and intensifying pastes.

Product Selector

Format System Main Features Lowest


Max Tg1


Adhesive Film

SA 70 ¬ Highly toughened resin

matrix ¬ Consistent bond-line

thickness and weight ¬ High strain to failure,

high toughness ¬ Excellent handling and

no mixing required

16 hrs at 70°C


110°C

Co-cure with 70°C prepregs for core and high strength adhesive bonding applications

SA 80 12 hrs at

80°C 100°C

Co-cure with 80°C prepregs for core and high strength adhesive bonding applications

Surface Films

SF 70 ¬ Surface film to generate a resin rich surface

¬ Suitable for sub-surface applications

16 hrs at 70°C


90°C Co-cure with 70°C prepregs for resin rich surface

SF 80 12 hrs at

80°C 100°C

Co-cure with 80°C prepregs for resin rich surface

SF 96

¬ Pinhole free surface for easy preparation and application of paint system

10 hrs at 85°C


115°C

Co-cure with 85°C prepregs for resin rich surface ideal for sanding / priming prior to painting

SF 95VH ¬ Silicon carbide filled

film to generate very hard wearing surfaces

10 hrs at 85°C


130°C

Ideal for applications that require a highly toughened system such as car body undertrays

Intensifying Pastes

SP 11100

¬ Co-curable with prepreg systems

¬ Compatibility of handling and processing

¬ Ideal for core splicing and gap filling

16 hrs at 70°C


75°C Core splicing and gap filling with 70°C prepregs

SP 4832 12 hrs at

80°C 100°C

Low density, core splicing and gap filling with 80°C prepregs

SP 9435 12 hrs at

85°C 100°C

Core splicing, prevent bridging and gap filling with 85°C prepregs

Syntactic Core

SY 110

¬ Lightweight drapable core material

¬ Co-curable with most Gurit Epoxy Prepregs & SPRINT™

¬ Fast lay-up times ¬ Available at 0.7mm

and 1.0mm thickness

12 hrs at 80°C

¬ Vacuum Bagging 110°C Produces ultra-light and stiff panels

PR

EPR

EG P

REP

REG






Adhesive Films

SA 70 is an adhesive film that is designed for secondary bonding, core-bonding and for co-

curing with the range of Gurit prepregs. It can be cured at temperatures as low as 70° C, or

can be more quickly cured at temperatures above 120°C. The product has an out-life of 28

days.

SA 80 is an adhesive film that is designed for secondary bonding, core-bonding and for co-

curing with the range of Gurit prepregs. It can be cured at temperatures as low as 80°C, or

can be more quickly cured at temperatures above 120°C. It has an out-life of 56 days at

room temperature.

Surface Films

Gurit have a range of surfacing materials specific to a number of applications. SF 70 and 80

are pale green lightweight, sandable films curable at 70°C and 80°C respectively. It provides

a pin-hole free surface to all marine mouldings with minimal print-through, onto which a paint

finish can be applied.

SF 95VH is a silicon carbide filled surfacing system developed initially for the automotive

sector to protect vulnerable underbody components of both GT racing and sports cars which

minimises fibre damage from foreign object impacts. For details of cure schedules, please

refer to data sheet.

SF 96 is a grey filled epoxy film designed to enhance the surface finish of composite

components. Curable at 85°C with a vacuum only process it provides an easy sanding

pinhole free surface finish with minimal print through from the underlying laminate. SF 96

provides a stable surface onto which a paint finish can be applied once lightly keyed.

Syntactic Core

SY 110 is a lightweight drapable core material that is designed to be co-curable with most

Gurit Epoxy Prepregs & SPRINT™ to produce ultra-light and stiff panels. SY 110 has a wide

process window, curing from 85-130ºC. SY 110 is available at 0.7mm and 1.0mm thickness.

Intensifying Pastes

Gurit’s mono-component pastes are pre-catalysed adhesive/filler systems that can be used

in conjunction with Gurit prepregs and SPRINT™. They are used as in-situ fillers to bridge

corners or tight radii and can also be used as core splicing adhesives. The system range

covers black and white variants in high and low densities. Being pre-catalysed system, they

require freezer storage for long-term stock holding. Out-life at 21°C is 20 days.

PR

EPR

EG P

REP

REG






Code Selector Adhesive Films

SA 70 Reinf. Wt

(gsm) Width (mm)

Resin Weight (g)


(m2) MOQ (m2) Order Code Availability

SA 70 Film 0 1270 100g No Carrier 100 127 127 PP00-3640 SPECIALIST

SA 70 Film 0 1270 150g No Carrier 81 102.87 102.87 PP00-5549 STANDARD



SA 70 Film 25 1270 150g Scrim 100 127 127 PP11-3420 STANDARD

SA 70 Film 25 1270 250g Scrim 80 101.6 101.6 PP11-2279 STANDARD

SA 70 Film 25 1270 400g Scrim 50 63.5 63.5 PP11-2278 STANDARD

SA 80 Reinf. Wt

(gsm) Width (mm)

Resin Weight (g)



SA 80 Film 0 1270 100g No Carrier 100 127 127 PC00-735 SPECIALIST

SA 80 Film 0 1270 150g No Carrier 100 127 127 PP00-5476 STANDARD

SA 80 Film 0 1270 200g No Carrier 100 127 127 PC00-1778 SPECIALIST

SA 80 Film 0 1270 250g No Carrier 80 101.6 101.6 PC00-4202 STANDARD

SA 80 Film 0 1270 250g No Carrier 300 381 381 PC00-6437 STANDARD

SA 80 Film 0 1270 300g No Carrier 50 63.5 63.5 PC00-2270 STANDARD

SA 80 Film 0 1270 400g No Carrier 50 63.5 63.5 PC00-4361 SPECIALIST

SA 80 Film 25 1270 150g Scrim 100 127 127 PC11-666 ESSENTIALS

SA 80 Film 25 1270 200g Scrim 80 101.6 101.6 PC11-669 STANDARD

SA 80 Film 25 1270 250g Scrim 80 101.6 101.6 PC11-579 ESSENTIALS

SA 80 Film 25 1270 250g Scrim 20* 25.4 101.6 PC11-7022 STANDARD

SA 80 Film 25 1270 300g Scrim 80 101.6 101.6 PC11-804 STANDARD

SA 80 Film 25 1270 400g Scrim 50 63.5 63.5 PC11-580 SPECIALIST


Black Pigmented (BL) Adhesive Film


*note that a minimum 4 roll order applies & an additional price premium may be applied

Surfacing Films Reinf. Wt

(gsm) Width (mm)

Resin Weight (g)



SF70 Film 138 1260 150g 2 Scrims 50 63 TBC SC11-4405 SPECIALIST

SF80 Film 138 1255 150g 2 Scrims 80 100.4 62.75 SC11-2829 ESSENTIALS

SF80 Film 138 1255 150g 2 Scrims 20* 25.1 100.4 SC11-7021 STANDARD

SF96 Film 138 1260 300g 2 Scrims 40 50.4 50.4 SA11-7004 ESSENTIALS

SF96 Film 69 1260 700g Scrim 30 37.8 75.6 SA11-4587 SPECIALIST

SF95VH Film 50 1270 300g Scrim 50 63.5 63.5 SA11-1654 SPECIALIST

*note that a minimum 4 roll order applies & an additional price premium may be applied

PR

EPR

EG P

REP

REG






Syntactic Core Films

SY 110 Width (mm)

Resin Weight (g)

Thickness (mm)

Format Length

(lm) Quantity


SY 110 Film 1270 560 0.7 No Carrier 33 41.9 76.2 SA00-4606 SPECIALIST

SY 110 Film 1250 800 1.0 No Carrier 60 37.5 75 SA00-2691 STANDARD

Intensifying Pastes

Size Units Description MOQ (Each) Order Code Availability

SP 11100 32 x 300 ml SP 11100 RESIN 300ml CARTRIDGE/BOX 32 1 FY1100-33 SPECIALIST

SP 4832 20 x 300 ml SP4832 RESIN 300ml CARTRIDGE/BOX 20 1 FX4832-33 STANDARD

SP 9435 20 x 300 ml SP9435 RESIN 300ml CARTRIDGE/BOX 20 1 FX9435-21 STANDARD

PR

EPR

EG P

REP

REG






Fire Retardant Materials

Gurit’s range of Fire Retardant (FR) products are designed to deliver high performance

laminates whilst meeting demanding fire requirements. The ease of use and processing

properties of these systems allow large parts to be manufactured in one operation using

vacuum only consolidation.

The FR range is available in a wide variety of formats from ambient curing liquid systems to

elevated temperature curing SPRINT™ products. Typical applications include cladding of

buildings, interior and exterior train parts, commercial/military craft and fire protection on

passenger ferries/superyachts.

Product Selector

Format System Main Features Intended Application

Fire Test Standards

Laminating Ampreg 21FR

¬ Range of working times ¬ Capable of ambient only cures ¬ Ideal for wet laminating large

composite structures

Large Civil Structures

BS476 Parts 6 & 7 UL94

SPRINT™

ST 70FR

¬ Low smoke toxicity ¬ Halogen-free ¬ 70°C curable ¬ Suitable for Lloyds and MCA compliant

structures

Industrial / commercial marine craft and civil applications

BS476 Parts 6 & 7 BS 6853 Annexe B.2 ISO 5658-2 DIN 5510-2 ISO 4589-2

ST 91FR

¬ Outstanding compressive properties ¬ Low void content vacuum bag

processing ¬ Controlled flow ¬ Light tack – suitable for use in higher

ambient temperature

Civil Structures ASTM E84 UL94 BS476 Part 7

ST 130FR ¬ 85°C curable ¬ Tg > 130°C (with elevated temp cures) ¬ Excellent tack and drape ¬ HL2 in R1 and R7 to EN45545 ¬ Pass for bulk-heads, walls and ceiling

linings to IMP FTP Part 5

Rail / Industrial / Commercial marine craft

EN 45545 IMO FTP Part 5

Prepreg

SE 130FR

SE 90FRBL

¬ Black tinted resin ¬ Outstanding compressive properties ¬ Controlled flow ¬ Light tack

Civil Structures

Surface Film

SF 80FROBL ¬ Effect FR layer to epoxy substrates ¬ High gloss black surface finish ¬ Resistant to Moisture ingress

Protection of structural components; engine bays and exhaust runs in marine craft

ISO 5660-1 FMVSS302

SF 130FR ¬ Benefits from same features as

SE/ST130FR ¬ Improves demoulded surface finish

Rail / Industrial / Commercial marine craft


Resin Film SA 130FR

¬ Benefits from same features as SE/ST130FR

¬ Provides additional resin for sandwich laminate manufacturing


FR M

ATE

RIA

LS FR

MA

TERIA

LS






Code Selector

Laminating Systems

Ampreg 21FR Size Units Description Mix Ratio

(R:H) MOQ

(Each) Order Code Availability

Individual resin component size

Resin 257 kg AMPREG 21FR RESIN 257KG 2 F122-005 SPECIALIST

Resin 15.85 kg AMPREG 21FR RESIN 15.85KG 6 F122-004 SPECIALIST

Use the mix ratio to select recommended hardener component size

Standard 18 kg AMPREG21FR HARD STD 18KG

100:21 (by weight)

1 F122-013 SPECIALIST

Standard 3.33 kg AMPREG21FR HARD STD 3.33KG 1 F122-015 SPECIALIST

Slow 3.33 kg AMPREG21FR HARD SLOW 3.33KG 1 F122-016 SPECIALIST

Extra Slow 18 kg AMPREG21FR HARD EXT-SLOW 18KG 1 F122-014 SPECIALIST

Ultra Slow 900 kg AMPREG 21FR UL-SLOW HARD 900KG 100:18 (by weight)


Ultra Slow 15.4 kg AMPREG 21FR UL-SLOW HARD 15.4KG A/F 9 F122-008 SPECIALIST

Note that relative ordering quantities are as follows:

20 x 257KG drum A21FR Resin = 1 x 900KG IBC A21FR Ultra Slow Hardener

1 x 257KG drum A21FR Resin = 3 x 18KG pail A21FR Std / Extra Slow Hardener

1 x 257KG drum A21FR Resin = 3 x 15.4KG pail A21FR Ultra Slow Hardener

1 x 15.85KG pail A21FR Resin = 1 x 3.33 KG pail A21FR Fast / Std / Extra Slow Hard

SPRINT™ Systems

SPRINT™ Reinf. Wt

(gsm) Width (mm)

RC (%) Format Length (lm) Quantity

(m2) MOQ (m2)


ST 91FR

RC200T 194 1270 42 S/S 40 50.8 50.8 SA13-7030 SPECIALIST

XC411 410 1270 42 S/S 150 190.5 190.5 SA23-6855 SPECIALIST

ST 130FR

XC411 410 1270 48 S/S 20 25.4 25.4 SA23-7190 SPECIALIST

XC411 410 1270 48 S/S 100 127 127 SA23-7190L SPECIALIST

RC416T 416 1270 48 S/S 25 31.8 31.8 SA13-7188 SPECIALIST

RC416T 416 1270 48 S/S 66 83.8 83.8 SA13-7188L SPECIALIST

XE600 600 1255 42 S/S 25 31.4 31.4 SA21-7222 SPECIALIST

RE295H4 300 1240 42 S/S 50 62 62 SA11-7334 SPECIALIST

WRE581T 580 1250 42 S/S 20 25 25 SA11-7186 SPECIALIST

WRE581T 580 1250 42 S/S 100 125 125 SA11-7186L SPECIALIST

WRE850T 850 1250 42 S/S 20 25 25 SA11-7220 SPECIALIST

For ST 70FR product availability please contact your local Gurit customer support representative.

FR M

ATE

RIA

LS FR

MA

TERIA

LS






Prepreg Systems

Prepreg Reinf. Wt

(gsm) Width (mm)

RC (%) Format Length

(lm) Quantity


SE 90FRBL

XC411 410 1270 40 2DPE 40 50.8 50.8 PG23-6897 SPECIALIST

SE 130FR

HEC 300 400 45 POPA 150 60 60 PA53-7134 SPECIALIST

XC411 410 1270 48 2DPE 40 50.8 50.8 PA23-7139 SPECIALIST

Resin Films

Ancillaries Reinf. Reinf. Wt

(gsm) Width (mm)

Resin Weight (g)

Format Length

(lm) Quantity

(m2) MOQ (m2)

Order Code

Availability

SA 130FR

SA 130FR Scrim 25 1270 250 Resin Film 80 101.6 101.6 PA11-7141 SPECIALIST

SA 130FR Scrim 25 1270 400 Resin Film 60 76.2 76.2 PA11-7136 SPECIALIST

Surface Films

Ancillaries Reinf. Reinf. Wt

(gsm) Width (mm)

Resin Weight (g)

Format Length

(lm) Quantity

(m2) MOQ (m2)

Order Code

Availability

SF 80FROBL

SF 80FROBL Scrim 25 1270 220 Surface Film 60 76.2 76.2 SC00-2243 SPECIALIST

SF 80FROBL 2 Scrims 138 1260 220 Surface Film 50 63 63 SC11-5341 SPECIALIST

For SF 130FR product availability please contact your local Gurit customer support representative.

ESSENTIALS = manufactured to stock STANDARD = manufactured to order SPECIALIST = please contact your local office for product availability



Core Materials

Introduction

Cores in a sandwich construction are specified by designers and architects to increase stiffness and reduce the weight of a composite structure. Gurit has a range of core materials to fit any specification or manufacturing process.

Gurit® Corecell™ Gurit® Corecell™ is a structural foam core material using a SAN polymer base featuring high toughness and impact resistant characteristics. Gurit® Corecell™ has become widely accepted for the construction of large, high performance structures. Although originally developed for the marine industry, it is now used in a range of other applications such as wind turbines and sub-sea vessels. Gurit® Corecell™ grades have various type approvals including the American Bureau of Shipping (ABS), Det Norske Veritas (DNV), Germanischer Lloyd (GL), Registro Italiano Navale (RINA) and Bureau Veritas (BV). Please check for additional product approvals.

Gurit® PVC Gurit® PVC is a closed cell, cross-linked PVC foam. It provides high strength to weight ratio for all composite applications. Other key features include outstanding chemical resistance, low water absorption and excellent thermal insulation capabilities.

Gurit® Kerdyn™ Green Gurit® Kerdyn™ Green is a recyclable, thermoplastic foam produced out of up to 100%recycled PET with good mechanical properties, temperature resistance and significantly improved resin uptake. Offering a cost efficient solution against higher performance cores, the range will offer both normal and fire retardant densities. Gurit® Kerdyn™ Green is approved by Det Norske Veritas (DNV) Germanischer Lloyd (GL).

Gurit® Balsaflex™ Gurit® Balsaflex™ is the classic end-grain balsa wood core, featuring highest strength and stiffness to weight ratio of all core materials. Gurit® Balsaflex™ is available in range of densities, thickness and format/finish. Gurit® Balsaflex™ is approved by by Det Norske Veritas (DNV) Germanischer Lloyd (GL).

CO

RE

CO

RE




Forms of Supply

Gurit standard product forms are described below. Gurit can also tailor sheets to your own specification - please call to discuss your requirements.

PL – Plain Sheet – Optimum material properties. Limited bending in-

mould.

PH – Plain with Bleeder Holes – Assists air release in vacuum bag processes.

Cuts for conformability (Foam)

Gurit knife cut finish is standard on Gurit® Corecell™ and Gurit® Kerdyn™. Saw cut is standard for Gurit® PVC while knife cut finish on Gurit® PVC is limited. Knife cuts are not visible when the sheets lie flat and these narrow knife-cuts minimize unnecessary resin consumption compared to saw-cut core finishes. Please be advised that cuts are dependent upon the density and thickness of the material. Higher density and thickness materials may need to be saw cut. Maximum sheet size is half of a full-size sheet. Please contact your customer support representative for more information.

SC – Single Cut – Provides flexibility in a single direction on one or

both sides of a sheet. If done on both sides, the cuts intersect so no bleeder holes are necessary for vacuum bagging. Max sheet size is half of a full-size sheet.

DC – Double Cut – Provides optimum flexibility in two directions on one or two sides of the sheets. If Double-Cut on both sides, the intersecting cuts make DC a highly effective resin infusion medium. Max sheet size is half of a full-size sheet.

CS – Contour Scrim – Provides optimum flexibility in two directions. Sheets are cut in 30mm squares and bonded to a glass scrim. Available in half sheet size only.

CO

RE

CO

RE




Forms of Supply

VIC – Vacuum Infusion Core – There are several VIC options and Gurit can customise grooving patterns and bleeder holes as required. For curved laminate sections, double-sided DC is very effective system for resin infusion with low weight gain. Heat-forming VIC surface cut also useful for obtaining curved panels with minimal resin uptake.

Product Formats (Balsa)

Gurit® Balsaflex™ is available plain or with typical formats including perforations, microgrooves, with or without scrim, contour scrim and with optional coating.

Other Product Formats

Bead and Cove - Bead and cove strip planking aids the building of large, curved structures, in a mouldless build method.

Fillet strips – Triangular edge strips to create tapered panel edge drop-offs, or stringer base

fillets.

Kits – Gurit has an extensive kitting capability to provide all the formats described here in customized, numbered, ready to use, CNC machined kits.

CO

RE

CO

RE




Core Materials Range

Gurit® Corecell™ M

Gurit® Corecell™ M is the next generation of Gurit® Corecell™. Combining high static properties, high toughness and compatibility with infusion and prepreg processes. Gurit® Corecell™ M benefits from American Bureau of Shipping (ABS), Det Norske Veritas (DNV), Germanischer Lloyd (GL), Registro Italiano Navale (RINA) and Bureau Veritas (BV) certification.

Gurit® Corecell™ S

Gurit® Corecell™ S has been developed primarily to resist hydrostatic pressures in sub-sea applications. It is manufactured in two densities, and buoyancy modules can therefore be designed to depths up to 1100 metres (averages). Gurit® Corecell™ S is only available in full thickness.

Gurit® Corecell™ T

Gurit® Corecell™ T is the lightest density Corecell™ foam available. T400 provides improved compressive strength over M60 and is better suited for thin skinned laminates. Gurit® Corecell™ T has ABS, GL, and DNV certification.

Gurit® Kerdyn™ Green

Gurit® Kerdyn™ Green and Gurit® Kerdyn™ Green FR are both up to 100% recycled PETfoam, offering a wide range of densities and significantly improved resin uptake performance. The latest product range gained DNV-GL certification.

Gurit® PVC

Gurit® PVC is a closed cell, cross-linked PVC foam. It provides high strength to weight ratio for all composite applications. Gurit® PVC has DNV certification. The Gurit® PVC range also offers HT60 and HT80 with high temperature processing up to 140°C.

Gurit® Balsaflex™

Gurit® Balsaflex™ is the classic high quality end-grain balsa wood core. Rigid panels are available in higher thickness, flexible panels are available up to 55mm. Large flexible panels with 1220 x 1220mm are also available. Gurit® Balsaflex™ certified by Det Norske Veritas (DNV) Germanischer Lloyd (GL).

CO

RE

CO

RE




Code Selector

Gurit® Corecell™

Corecell Short Edge Marking

Nominal Density

Half Sheet Size

Nominal Sheet Size

Unbonded Thickness

Range Availability

kg/m3 mm mm mm

Gurit® Corecell™ M available from the Gurit ECCC site in Germany

M60 Yellow + Green 65 1285x1285 1285x2605 3-50 ESSENTIALS

M80 Yellow + Blue 85 1220x1220 1220x2440 3-50 ESSENTIALS

M100 Yellow + Black 107.5 1130x1130 1130x2275 3-48 ESSENTIALS

M130 Yellow + Light Brown 140 1015x1015 1015x2045 3-40 ESSENTIALS

M200 Yellow + Brown 200 915x915 915x1830 3-30 ESSENTIALS

Gurit® Corecell™ T available from the Gurit site in Magog (Canada)

T400 White + Green 71 1285x1285 1285x2605 3-53 SPECIALIST

T500 White + Blue 94 1195x1220 1195x2440 3-40 SPECIALIST

Gurit® Corecell™ S available from the Gurit site in Magog (Canada)

S1200 Red + Brown 210 890x890 890x1830 21-24 SPECIALIST

S1800 Red + Mauve 315 785x785 785x1600 16-21 SPECIALIST

Please note: Maximum unbonded thicknesses can vary across Gurit sites. Please contact your local sales representative for

more information

Gurit® Kerdyn™ Green

Core Type Short Edge Marking

Nominal Density

Half Sheet Size

Nominal Sheet Size

Unbonded Thickness

Range Availability

kg/m3 mm mm mm

Gurit® Kerdyn™ Green available from the Gurit sites in Volpiano and ECCC. (300 solely available from Tianjin, CN)

80 Blue 80 1005 x 1220 1005 x 2440 5-200 ESSENTIALS

100 Green 100 1005 x 1220 1005 x 2440 5-200 ESSENTIALS

115 Black 115 1005 x 1220 1005 x 2440 5-175 ESSENTIALS

135 Black + Green 135 1005 x 1220 1005 x 2440 5-150 ESSENTIALS

150 Orange 150 1005 x 1220 1005 x 2440 5-135 ESSENTIALS

200 Black + Yellow 200 1005 x 1220 1005 x 2440 5-100 ESSENTIALS

250 Black + Blue 250 1005 x 1220 1005 x 2440 5-80 ESSENTIALS

300 Black + Orange 300 1005 x 1220 1005 x 2440 5-80 ESSENTIALS

Gurit® Kerdyn™ Green FR available from the Gurit sites in Volpiano and ECCC

80 Blue + Red 80 1005 x 1220 1005 x 2440 5-200 SPECIALIST

115 Black + Red 115 1005 x 1220 1005 x 2440 5-175 SPECIALIST

180 Brown + Red 180 1005 x 1220 1005 x 2440 5-110 SPECIALIST

CO

RE

CO

RE




Gurit® PVC and PVC HT


Nominal Density

Half Sheet Size

Nominal Sheet Size

Unbonded Thickness

Range Availability

kg/m3 mm mm mm

Gurit® PVC

40 Azure 40 945 x 1330 1330 x 2850 3-84 STANDARD

48 Lilac 48 910 x 1270 1270 x 2730 3-80 STANDARD

60 Yellow 60 1150 x 1120 1150 x 2450 3-78 ESSENTIALS

80 Green 80 1020 x 1080 1020 x 2180 3-72 ESSENTIALS

100 Red 100 950 x 1020 950 x 2050 3-68 STANDARD

130 Blue 130 850 x 950 850 x 1900 3-58 STANDARD

200 Brown 200 - 750 x 1600 3-48 STANDARD

250 Green 250 - 700 x 1500 3-47 STANDARD

Gurit® PVC HT

HT60 Pink 60 1120 x 1200 1120 x 2400 3-78 ESSENTIALS

HT80 Light Yellow 80 1005 x 1070 1005 x 2150 3-75 ESSENTIALS

Gurit® Balsaflex™


Nominal Density

Half Sheet Size

Nominal Sheet Size

Unbonded Thickness

Range Availability

kg/m3 mm mm mm

Gurit® Balsaflex™ available from the Gurit site in Equador

110 Written 110 1220x1220

1220x1220

1220x1220

610x1220 6.35-55 SPECIALIST

150 Written 155 610x1220 6.35-55 ESSENTIALS

220 Written 220 610x1220 6.35-55 SPECIALIST

CO

RE

CO

RE




Core Kitting

Core kitting by Gurit offers the following benefits to customers:

¬ Reduced labour time

¬ Reduced waste levels

¬ High level of accuracy

¬ Improved overall quality

Wherever they are in the world, Gurit provides a local kitting service to its industrial and

marine customers. Using either 5-Axis, or 3-Axis CNC machines, along with a range of

semi-automatic machines and manual tools, the company’s full range of core materials -

Gurit- Corecell™, Gurit® Kerdyn™, Gurit® PVC or Gurit® Balsaflex™ - can be converted into

customised, labelled and ready-to-use kits, based on the customer’s drawings or 3D model.

Gurit has developed specific knowledge and experience of correct flute and clearance

angles to provide optimum cutting conditions. This allows for quick cutting to minimise cost,

accurate cutting for component dimensions, and fine cutting to allow the best nesting

routines, so maximising yield rates and minimising waste.

Gurit stocks its range of core materials in each region, reducing the lead-time to supply cost-

effective and flexible kitting solutions to meet every customer’s requirements.

CO

RE

CO

RE






Spabond™ Adhesive Systems

Spabond™ adhesives offer outstanding performance in high-stress, high-load applications for Marine,

Wind Energy and Civil Engineering applications.

Product Selector

System Properties at 20°C Description Hardener Mix Ratio Working Time*

at 20°C Clamp Time*

at 20°C Sag*

Max Temp

Sp

ab

on

d™

30

0 S

eri

es

Structural, high dynamic load applications

Spabond™ 335 Toughened gap filling epoxy adhesive system.

Fast (Black) 2:1

(by volume)

20 mins 6 hrs 5mm 65°C

Standard (Grey) 1 hr 9 hrs

Spabond™ 340LV HT

High strength, rubber toughened, fast dispense. Uses: Industrial, wind energy and marine.

Fast (Red)

2:1 (by volume)

½ hr 4 hrs

20 – 25mm 68°C Slow (Purple) 4 hrs 18hrs

Extra Slow (Blue) 6 hrs 24 hrs

Spabond™ 345 Highly sag resistant. Uses: highest performance marine projects

Fast (Black)

2:1 (by volume)

½ hr 5 ½ hrs

15 – 30mm

75°C

Slow (Red) 4 hrs 12 hrs 85°C

Extra Slow (Blue) 6 hrs 19 hrs 80°C

Sp

ab

on

d™

50

0 S

eri

es

Specialist substrate and applications

Spabond™ 5 Minute

`Tacking and secondary bonding. 1:1

(by volume) 5 mins 20 mins 10 - 15mm 55°C

Spabond™ 540

Spabond™ 540LV

High elongation, long bonding times.

Fast (Red)

1:1 (by volume)

¾ hr 3 ½ hrs

20 – 30mm

56°C

Standard (Purple) 2 hrs 15 hrs 58°C

Low viscosity resin option for easier application.

Slow (Green) 4 hrs 25 hrs 52°C

Extra Slow (Blue) 6 ½ hrs tbc tbc

Spabond™ 545 Bonds multiple substrates found in general applications.

Fast 2:1

(by volume)

25 mins 5 hrs

0.2 - 20mm

63°C

Slow 90 mins 10 hrs 61°C

Spabond™ 568 Core bonding adhesive 2:1

(by volume) 5 ½ hrs 24 hrs 10mm 65°C

Spabond™ 570 Spabond™ 570LV

Easy mixing/smooth spreading. Bonds all woods 1:1

(by volume) 1 ½ hrs - 10 -20mm 55°C

Low viscosity hardener option for easier application

Sp

ab

on

d™

70

0 S

eri

es

Rapid structural adhesives

Spabond™ 730 High strength, rapid curing. General purpose adhesive. 1:1

(by volume) 10 mins 1 hr 10 - 15mm 60°C

Sp

ab

on

d™

80

0 S

eri

es

Structural WTG blade bonding adhesives

Spabond™ 840 High strength, rapid curing long open time adhesive for WTG blade bonding.

100:33 (by weight)

- - 25 – 30mm 72°C

Please note:

A suitable mixing method is required to mix and dispense Spabond™ adhesives. For our range of dispense guns

and mix heads, please refer to the Ancillary Products section.

S/S – straight sided metal pail for mixing machine extrusion and automated dispense

AD

HESIV

ES AD

HES

IVES

https://www.bing.com/images/search?view=detailV2&ccid=ZOig8dUm&id=BD6F1F8576E1C5436F86C253746AE4B9D8FA0740&thid=OIP.ZOig8dUm4Y1tMMypMLsl0wHaF6&q=lloyds+register&simid=607996165206445598&selectedIndex=0






Spabond™ 300 Series Code Selector

Spabond™ 335

Components Size Units Description Mix Ratio (R:H) MOQ



Resin 20 kg SP335 RESIN 20KG S/S 6 F644-018 STANDARD


Fast 9.2 kg SP335 HARD FAST 9.2KG 100:46

(by weight) 1 F644-039 STANDARD

Standard 8.8 kg SP335 HARD STD 8.8KG 100:44


Extra-slow 8.4 kg SP335 HARD X-SLOW 8.4KG 100:42



1 x 20kg pail Spabond™ 335 Resin = 1 x 9.2kg pail Spabond™ 335 Fast Hardener

1 x 20kg pail Spabond™ 335 Resin = 1 x 8.8kg pail Spabond™ 335 Standard Hardener

1 x 20kg pail Spabond™ 335 Resin = 1 x 8.4kg pail Spabond™ 335 Ex-slow Hardener

Spabond™ 335 is not currently supplied in cartridges.

AD

HES

IVES

AD

HESIV

ES






Spabond™ 340LV HT

Cartridges Size Units Description Mix Ratio

(R:H) MOQ

(Each) Order Code

Availability

Resin and hardener cartridge pack sizes

HT Fast Pack 400 ml SP340LV R/HF-HT 400ml CART/BOX OF 20 1 F645-094 STANDARD

HT Fast Pack 900 ml SP340LV-R/HF-HT 900ml CART/BOX OF 10 1 F645-046 STANDARD

HT Slow Pack 400 ml SP340LV R/HSL-HT 400ml CART/BOX OF 20 1 F645-095 STANDARD

HT Slow Pack 900 ml SP340LV-R/HSL-HT 900ml CART/BOX OF 10 1 F645-048 STANDARD

HT Extra-slow 400 ml SP340LV R/HXS-HT 400ml CART/BOX OF 20 1 F645-096 STANDARD

HT Extra-slow 900 ml SP340LV-R/HXS-HT 900ml CART/BOX OF 10 1 F645-069 STANDARD

Spabond™ 340LV HT Cartridges are compatible with the following guns / mix-heads:

Description 400ml 900ml

Manual Dispensing Gun K215-070 K215-044

Pneumatic Dispensing Gun K215-022 K215-039

Mix-heads (note that 1 mix-head per cartridge is supplied with each box) A640-019 (bag of 20) A640-031* (bag of 10)

*Note that from Q4 2019 this mix-head will be replaced with A640-021

Components Size Units Description Mix Ratio

(R:H) MOQ

(Each) Order Code

Availability


Resin 200 kg SP340LV RESIN 200KG 1 F645-049 ESSENTIALS

Resin 20 kg SP340LV RESIN 20KG S/S 6 F645-054 ESSENTIALS


HT Fast 200 kg SP340 HARD FAST (HT) 200KG

100:49 (by weight)

1 F645-080 STANDARD

HT Fast 20 kg SP340 HARD FAST (HT) 20KG S/S 1 F645-078 STANDARD

HT Fast 10 kg SP340 HARD FAST (HT) 10KG 1 F645-097 ESSENTIALS

HT Slow 200 kg SP340 HARD SLOW (HT) 200KG

100:49 (by weight)

1 F645-071 STANDARD

HT Slow 20 kg SP340 HARD SLOW (HT) 20KG S/S 1 F645-072 STANDARD

HT Slow 10 kg SP340 HARD SLOW (HT) 10KG 1 F645-098 ESSENTIALS

HT Extra-slow 200 kg SP340 HARD EX-SLOW (HT) 200KG

100:47 (by weight)

1 F645-083 STANDARD

HT Extra-slow 20 kg SP340 HARD EX-SLOW (HT) 20KG S/S 1 F645-081 STANDARD

HT Extra-slow 10 kg SP340 HARD EX-SLOW (HT) 10KG 1 F645-099 STANDARD


2 x 200kg pails Spabond™ 340LV Resin = 1 x 200kg pail Spabond™ 340LV HT Hardener

1 x 200kg pails Spabond™ 340LV Resin = 5 x 20kg pail Spabond™ 340LV HT Hardener

2 x 20kg pail Spabond™ 340LV Resin = 1 x 20kg pail Spabond™ 340LV HT Hardener

1 x 20kg pail Spabond™ 340LV Resin = 1 x 10kg pail Spabond™ 340LV HT Hardener

AD

HES

IVES

AD

HESIV

ES






Spabond™ 345

Cartridges Size Units Description Mix Ratio (R:H) MOQ

(Each) Order Code

Availability


Fast Pack 400 ml SP345 R/HF 400ml CART/BOX 20 1 F646-016 STANDARD

Black Fast Pk 400 ml SP345 R/HFBL400ml CART/BOX 20 1 F646-024 STANDARD

Slow Pack 400 ml SP345 R/HSL 400ml CART/BOX 20 1 F646-014 STANDARD

Spabond™ 345 Cartridges are compatible with the following guns / mix-heads:

Description 400ml

Manual Dispensing Gun K215-070

Pneumatic Dispensing Gun K215-022

Mix-heads (note that 1 mix-head per cartridge is supplied with each box) A640-019 (bag of 20)


(Each) Order Code

Availability


Resin 20 kg SP345 RESIN 20KG S/S 6 F646-047 ESSENTIALS


Fast 20 kg SP345 HARD FAST 20KG S/S

100:48 (by weight)

1 F646-049 STANDARD

Fast 9.6 kg SP345 HARD FAST 9.6KG 1 F646-041 ESSENTIALS

Black Fast 9.6 kg SP345 HARD FAST BLACK 9.6KG 1 F646-042 STANDARD

Slow 20 kg SP345 HARD SLOW 20KG S/S 100:48 (by weight)

1 F646-048 STANDARD

Slow 9.6 kg SP345 HARD SLOW 9.6KG 1 F646-043 ESSENTIALS

Extra-slow 9.6 kg SP345 HARD EX-SLOW 9.6KG 100:48



2 x 20kg pail Spabond™ 345 Resin = 1 x 20kg pail Spabond™ 345 Fast / Slow Hardener

1 x 20kg pail Spabond™ 345 Resin = 1 x 9.6 kg pail Spabond™ 345 Hardeners

AD

HES

IVES

AD

HESIV

ES







Spabond™ 5-Minute


(R:H) MOQ

(Each) Order Code

Availability

Resin and hardener pack sizes

Pack 400 ml SP 5-MIN.ADH.R/H 400ml CARTRIDGE/BOX 20 1 F652-021 STANDARD


Resin 310 ml SP 5-MIN.ADH.RES.310ml N/ PIGCART/BOX 20 1 :1 (by volume)


Hardener 310 ml SP 5-MIN.ADH.HARD.310ml N/PIGCART/BOX 20 1 F652-027 SPECIALIST

Spabond™ 5-Minute Cartridges are compatible with the following guns / mix-heads / nozzles:

Description 310ml 400ml

Manual Dispensing Gun Please contact Gurit Technical Support

K215-070


Mix-heads (note that 1 mix-head per cartridge is supplied with each box) Please contact Gurit Technical Support

A640-019 (bag of 20)

Spabond™ 568

Spabond™ 568

Size Units Description Mix Ratio

(R:H) MOQ

(Each) Order Code

Availability


Resin 17.5 kg SP568 RESIN 17.5KG 6 F654-023 STANDARD

Resin 10 kg SP568 RESIN 10KG (15.1L) 12 F654-021 STANDARD


Hardener 7.7 kg SP568 HARD EXTRA-SLOW 7.7KG S/S 100:44 (by weight)

1 F654-025 STANDARD

Hardener 4.4 kg SP568 HARD EXTRA SLOW 4.4KG/7.6L 1 F654-022 STANDARD


1 x 17.5kg pail Spabond™ 568 Resin = 1 x 7.7kg pail Spabond™ 568 Ex-slow Hardener

1 x 10kg pail Spabond™ 568 Resin = 1 x 4.4kg pail Spabond™ 568 Ex-slow Hardener

Spabond™ 568 is not supplied in cartridges. A

DH

ESIV

ES A

DH

ESIVES






Spabond™ 540


(R:H) MOQ

(Each) Order Code

Availability


Fast Pack 600 ml SP540LV R/HF 600ml CART/BOX OF 12 1 F648-044 STANDARD

Standard Pack 600 ml SP540LV R/HSTD 600ml CART/BOX OF 12 1 F648-045 STANDARD

Slow Pack 600 ml SP540LV R/HSL 600ml CART/BOX OF 12 1 F648-054 STANDARD


Description 600ml

Manual Dispensing Gun None




(R:H) MOQ

(Each) Order Code

Availability


Resin 200 kg SP540 RESIN 200KG 1 F648-042 STANDARD

Resin 20 kg SP540 RESIN 20KG S/S 6 F648-055 ESSENTIALS

LV Resin 20 kg SP540LV RESIN 20KG S/S 6 F648-050 STANDARD


Fast 19.0 kg SP540 HARD FAST 19.0KG S/S 100:95


Standard 18.4 kg SP540 STANDARD HARDENER 18.4KG S/S 100:92 (by weight)

7 F648-009 STANDARD

Standard 184 kg SP540 HARD STD 184KG 1 F648-033 STANDARD

Slow 18.6 kg SP540 SLOW HARDENER 18.6KG S/S 100:93 (by weight)

7 F648-051 ESSENTIALS

Slow 186 kg SP540 SLOW HARDENER 186KG 1 F648-038 STANDARD

Extra-slow 18.2 kg SP540 HARD EXTRA SLOW 18.2KG S/S 100:91



1 x 200kg pail Spabond™ 540 Resin = 10 x 19kg pail Spabond™ 540 Fast Hardener

1 x 200kg pail Spabond™ 540 Resin = 1 x 184kg pail Spabond™ 540 Standard Hardener

1 x 200kg pail Spabond™ 540 Resin = 1 x 186kg pail Spabond™ 540 Slow Hardener

1 x 200kg pail Spabond™ 540 Resin = 10 x 18.2kg pail Spabond™ 540 Ex-Slow Hardener

1 x 20kg pail Spabond™ 540/LV Resin = 1 x 18.2kg pail Spabond™ 540 Standard Hardener

1 x 20kg pail Spabond™ 540/LV Resin = 1 x 18.4kg pail Spabond™ 540 Standard Hardener

1 x 20kg pail Spabond™ 540/LV Resin = 1 x 18.6kg pail Spabond™ 540 Slow Hardener

1 x 20kg pail Spabond™ 540/LV Resin = 1 x 18.2kg pail Spabond™ 540 Ex-Slow Hardener

AD

HES

IVES

AD

HESIV

ES






Spabond™ 545


(R:H) MOQ

(Each) Order Code

Availability


Fast Pack 400 ml SPABOND 545 R/HF 400ml CARTS/BOX OF 20 2:1 (by volume)

1 F675-003 STANDARD

Slow Pack 400 ml SPABOND 545 R/HSL 400ml CARTS/BOX OF 20 1 F675-004 STANDARD


Description 400ml





(R:H) MOQ

(Each) Order Code

Availability


Resin 20 kg SPABOND 545 RESIN 20KG S/S 6 F675-005 STANDARD


Fast 18.8 kg SPABOND 545 FAST HARD 18.8KG S/S 100:47


Slow 18.4 kg SPABOND 545 SLOW HARD 18.4KG S/S 100:46



2 x 20kg pail Spabond™ 545 Resin = 1 x 18.8kg pail Spabond™ 545 Fast Hardener

2 x 20kg pail Spabond™ 545 Resin = 1 x 18.4kg pail Spabond™ 545 Slow Hardener

Spabond™ 570


(Each) Order Code

Availability


Resin 20 kg SP570 RESIN 20KG S/S 6 F640-023 STANDARD



Hardener 20 kg SP570 HARD STANDARD 20KG S/S

100:100 (by weight)

1 F640-024 STANDARD

Hardener 5 kg SP570 HARD STANDARD 5KG 1 F640-020 STANDARD

LV Hardener 20 kg SP570LV HARD STANDARD 20KG S/S 1 F640-026 STANDARD

LV Hardener 5 kg SP570LV HARD STANDARD 5KG 1 F640-025 STANDARD


1 x 20kg pail Spabond™ 570 Resin = 1 x 20kg pail Spabond™ 570 / LV Hardener

1 x 5kg pail Spabond™ 570 Resin = 1 x 5kg pail Spabond™ 570 / LV Hardener

Spabond™ 570 is not supplied in cartridges.

AD

HES

IVES

AD

HESIV

ES







Spabond™ 730

Cartridges Size Units Description Mix Ratio (R:H) MOQ

(Each) Order Code

Availability


Pack 400 ml SP730 R/H 400ml CART/BOX 20 1:1

(by volume) 1 F650-007 STANDARD


Description 400ml





Spabond™ 840


(Each) Order Code

Availability


Resin 180 kg SPABOND 840 RESIN 180KG 1 F680-002 STANDARD

Resin 20 kg SPABOND 840 RESIN 20KG S/S 1 F680-001 STANDARD


Hardener 180 kg SPABOND 840 HARD 180KG 100:33 (by weight)

1 F680-004 STANDARD

Hardener 20 kg SPABOND 840 HARD 20KG S/S 1 F680-003 STANDARD


3 x 180KG drum Spabond™ 840 Resin = 1 x 180KG drum Spabond™ 840 Hardener

1 x 180KG drum Spabond™ 840 Resin = 3 x 20KG pails Spabond™ 840 Hardener

3 x 20KG pails Spabond™ 840 Resin = 1 x 20KG pail Spabond™ 840 Hardener

Spabond™ 840 is not supplied in cartridges.

AD

HES

IVES

AD

HESIV

ES






Liquid Systems

Gurit is a leading supplier of high performance epoxy products formulated to meet market and

customer needs. Gurit’s innovative approach and expertise in epoxy formulations continues to deliver

market leading products for a wide range of market segments. Gurit provides a complete range of

formulated products from in-mould gelcoats to multi-purpose systems.

Gurit manufactures a wide range of formulated resin products, based on epoxy, polyurethane and

vinylester chemistry. These formulations are unique combinations of chemicals that have been

blended together to yield products with characteristics optimised for their intended application. The

products have been extensively tested both for their handling and usage characteristics, and for the

properties that result from their curing.

The characteristics of thermosets mean that they can be formulated into a wide variety of forms, with

many different liquid-state properties and cured properties.

Gurit offers three types of liquid systems:

¬ Ampreg™ Laminating Systems - epoxy based liquids, low viscosity for good wet-out, high

strength and stiffness.

¬ AMPRO™ Multi-purpose Systems - epoxy based. Capable of performing as adhesives,

coatings, filling compounds and laminating systems.

¬ PRIME™ Resin Infusion Systems – low viscosity, high performance epoxy based liquids ideal

for vacuum bag infusion and resin transfer moulding process

LIQ

UID

SYS

TEM

S LIQU

ID SYSTEM

S






AMPRO™ Multi-Purpose Systems

The all new AMPRO™ multi-purpose epoxy system surpasses and supersedes Gurit’s legacy range of multi-purpose systems for wooden and composite boat builders.

All AMPRO™ systems have a simple resin to hardener mix ratio of 3:1 parts by volume.

Product Selector

System Properties At 25°C Mixed

Viscosity* 150g

Pot-Life* Tack-off Time*

Earliest Sanding Time*

AM

PR

O™

Syste

m

Suitable for all general purpose applications including laminating, bonding, filling and coating.

AMPRO™ Resin

AMPRO™ Fast Hardener 1000 cP ½ hour 1 ½ hours 10 hours

AMPRO™ Slow Hardener 800 cP 1 ¼ hours 4 hours 20 hours

AMPRO™ Extra-slow Hardener 700 cP 1 ½ hours 5 hours 20 hours

AM

PR

O™

CL

R S

yste

m Ideal for clear coating and laminating applications where colour is critical.

AMPRO™ Resin

AMPRO™ CLR Fast Hardener 1000 cP ½ hours 1 ½ hours 10 hours

AMPRO™ CLR Slow Hardener 750 cP 1 ¼ hours 4 hours 20 hours

AMPRO™ CLR Extra-slow Hardener 700 cP 1 ½ hours 5 hours 20 hours

AM

PR

O™

BIO

Syste

m Market leading, accredited >40% bio-content multi-purpose system suitable for laminating, bonding, filling and coating.

AMPRO™ BIO Resin

AMPRO™ Fast Hardener 1260 cP ½ hour 1 ¼ hours 20 hours

AMPRO™ Slow Hardener 1100 cP ¾ hour 4 ½ hours 20 hours

AMPRO™ Extra-slow Hardener 1050 cP 1 hour 6 hours 20 hours

AM

PR

O™

SE

AL

Syste

m Solvent-free, low viscosity epoxy resin sealer for porous surfaces prior to coating and bonding.

AMPRO™ SEAL Resin AMPRO™ Fast Hardener 1253 cP ½ hour 1 ¾ hours 10 hours

*working time properties are highly subjective to ambient conditions and should be used an approximate guideline for all AMPRO™ systems at 25°C. Please refer to the

corresponding page of this document for specific testing methods used.

LIQ

UID

SYS

TEM

S LIQU

ID SYSTEM

S






Code Selector

AMPRO™ Multi-purpose Epoxy System

AMPRO™ Size Units Description Mix Ratio

(R:H) MOQ

(Each) Order Code

Availability


Fast Pack 6 x 1.33 kg AMPRO RES/HARD FAST 6x1.33KG PACK 1 F530-057 SPECIALIST

Fast Pack 4.2 kg AMPRO R/H FAST 4.2KG PACK 1 F530-026 SPECIALIST

Slow Pack 6 x 1.33 kg AMPRO RES/HARD SLOW 6x1.33KG PACK 1 F530-058 SPECIALIST

Slow Pack 4.2 kg AMPRO R/H SLOW 4.2KG PACK 1 F530-028 SPECIALIST

Extra-Slow Pack 6 x 1.33 kg AMPRO RES/HARD EXTRA-SLOW 6x1.33KG PACK


Extra-Slow Pack 4.2 kg AMPRO R/H EXTRA-SLOW 4.2KG PACK 1 F530-030 SPECIALIST


Resin 1000 kg AMPRO RESIN 1000KG 1 F530-008 SPECIALIST





Fast 200 kg AMPRO HARD FAST 200KG

100:29 (parts by weight)


Fast 20 kg AMPRO HARD FAST 20KG 1 F530-015 SPECIALIST



Slow 200 kg AMPRO HARD SLOW 200KG 1 F530-020 SPECIALIST




Extra-Slow 200 kg AMPRO HARD EXTRA-SLOW 200KG 1 F530-024 SPECIALIST




AMPRO™ packs are compatible with the following calibrated pump sets:

Description 1.3 kg Packs 4 kg Packs

AMPRO™ Pump Set K216-320 K216-321


2 x 1000KG IBC AMPRO™ Resin = 3 x 200KG drum AMPRO™ Hardener

3 x 200KG drum AMPRO™ Resin = 1 x 200KG drum AMPRO™ Hardener

1 x 200KG drum AMPRO™ Resin = 3 x 20KG pail AMPRO™ Hardener

1 x 20KG pail AMPRO™ Resin = 1 x 6KG pail AMPRO™ Hardener

1 x 10KG pail AMPRO™ Resin = 1 x 3KG pail AMPRO™ Hardener

LIQ

UID

SYS

TEM

S LIQU

ID SYSTEM

S






Code Selector

AMPRO™ CLR Multi-purpose Epoxy System Ideal for Clear-coating

AMPRO™ CLR Size Units Description Mix Ratio

(R:H) MOQ

(Each) Order Code

Availability


Fast Pack 6 x 1.33 kg AMPRO CLR RES/HARD FAST 6x1.33KG PK 1 F530-063 SPECIALIST

Fast Pack 4.2 kg AMPRO CLR R/H FAST 4.2KG PACK 1 F530-050 SPECIALIST

Slow Pack 6 x 1.33 kg AMPRO CLR RES/HARD SLOW 6x1.33KG PK 1 F530-064 SPECIALIST

Slow Pack 4.2 kg AMPRO CLR R/H SLOW 4.2KG PACK 1 F530-052 SPECIALIST

Extra-Slow Pack 6 x 1.33 kg AMPRO CLR RES/HARD EX-SLOW 6x1.33KG PACK


Extra-Slow Pack 4.2 kg AMPRO CLR R/H EXTRA-SLOW 4.2KG 1 F530-054 SPECIALIST







Fast 200 kg AMPRO CLR HARD FAST 200KG



Fast 20 kg AMPRO CLR HARD FAST 20KG 1 F530-039 SPECIALIST



Slow 200 kg AMPRO CLR HARD SLOW 200KG 1 F530-044 SPECIALIST




Extra-Slow 200 kg AMPRO CLR HARD EXTRA-SLOW 200KG 1 F530-048 SPECIALIST








2 x 1000KG IBC AMPRO™ Resin = 3 x 200KG drum AMPRO™ CLR Hardener

3 x 200KG drum AMPRO™ Resin = 1 x 200KG drum AMPRO™ CLR Hardener

1 x 200KG drum AMPRO™ Resin = 3 x 20KG pail AMPRO™ CLR Hardener

1 x 20KG pail AMPRO™ Resin = 1 x 6KG pail AMPRO™ CLR Hardener

1 x 10KG pail AMPRO™ Resin = 1 x 3KG pail AMPRO™ CLR Hardener

LIQ

UID

SYS

TEM

S LIQU

ID SYSTEM

S






Code Selector

AMPRO™ BIO Multi-purpose Epoxy System

AMPRO™ BIO Size Units Description Mix Ratio

(R:H) MOQ

(Each) Order Code

Availability


Fast Pack 6 x 1.3 kg AMPRO BIO RES/HARD FAST 6x1.30KG PK 1 F530-060 SPECIALIST

Fast Pack 4.1 kg AMPRO BIO R/H FAST 4.1KG PACK 1 F530-032 SPECIALIST

Slow Pack 6 x 1.3 kg AMPRO BIO RES/HARD SLOW 6x1.30KG PK 1 F530-061 SPECIALIST

Slow Pack 4.1 kg AMPRO BIO R/H SLOW 4.1KG PACK 1 F530-034 SPECIALIST

Extra-Slow Pack 6 x 1.3 kg AMPRO BIO RES/HARD EX-SLOW 6x1.30KG PACK


Extra-Slow Pack 4.1 kg AMPRO BIO R/H EXTRA-SLOW 4.1KG 1 F530-036 SPECIALIST


Resin 1000 kg AMPRO BIO RESIN 1000KG 1 F530-012 SPECIALIST





Fast 200 kg AMPRO HARD FAST 200KG


















2 x 1000KG IBC AMPRO™ BIO Resin = 3 x 200KG drum AMPRO™ Hardener

3 x 200KG drum AMPRO™ BIO Resin = 1 x 200KG drum AMPRO™ Hardener

1 x 200KG drum AMPRO™ BIO Resin = 3 x 20KG pail AMPRO™ Hardener

1 x 20KG pail AMPRO™ BIO Resin = 1 x 6KG pail AMPRO™ Hardener

1 x 10KG pail AMPRO™ BIO Resin = 1 x 3KG pail AMPRO™ Hardener

LIQ

UID

SYS

TEM

S LIQU

ID SYSTEM

S






Code Selector

AMPRO™ SEAL Multi-purpose Epoxy System

AMPRO™ SEAL Size Units Description Mix Ratio

(R:H) MOQ

(Each) Order Code

Availability


Fast Pack 6 x 1.3 kg AMPRO SEAL RES/HARD FAST 6x1.30KG PK 1 F530-066 SPECIALIST

Fast Pack 4.1 kg AMPRO SEAL R/H FAST 4.1KG PACK 1 F530-056 SPECIALIST




LIQ

UID

SYS

TEM

S LIQU

ID SYSTEM

S






Legacy Multi-Purpose Systems

The Gurit multi-purpose range consists of truly all-purpose systems for gluing, coating, laminating and filling. Note that these products will be replaced by AMPRO™ from H2 2020.

Product Selector

System Description Hardener Speed Mix ratio Intended Application

Handipack

Multi-purpose epoxy, supplied only in a small pack. It is designed for quick repair work and small scale construction jobs.

Handipack 15 mins 2:1

(parts by volume)

Laminating, coating or as an adhesive or filling compound.

SP 106

All-purpose epoxy which can be used for gluing, coating, laminating and filling

Fast 15 mins

5:1 (parts by volume)

Clear coating for wood and other substrates, or for laminating.

Slow 20 mins

Extra Slow 35 mins

SP 115 Low viscosity, UV stable high clarity laminating system

115 30 mins 5:2

(parts by volume)

Surfboards, Clear parts

SP 320

Solvent-free, clear epoxy coating that provides a high clarity, tough finish to whatever it is applied to.

Fast 15 mins

5:2 (parts by volume)

Coating wood to provide a depth of clarity that can only otherwise be achieved with many more coats of a conventional varnish.

Slow 30 mins

Eposeal 300

Solvent-based, low viscosity epoxy primer with an extremely low viscosity which ensures that the product achieves rapid and deep penetration of porous surfaces.

EP 300 - 1:1

(parts by volume)

Developed primarily for use on wood but can also be used on other materials such as GRP, stone, ferrocement, brick, etc.

LIQ

UID

SYS

TEM

S LIQU

ID SYSTEM

S






Code Selector

Handipack Multi-purpose Epoxy System

Handipack Size Units Description Mix Ratio

(R:H) MOQ

(Each) Order Code

Availability

Pack 5 x 0.375 litres HANDIPACK R/H+PUMPS 375ml, BOX OF 5 2:1

(by volume) 1 F520-011 STANDARD

SP106 Multi-purpose Epoxy System

SP 106 Size Units Description Mix Ratio

(R:H) MOQ

(Each) Order Code

Availability


Fast Pack 3.02 kg SP106 RES/HARD FAST 3.02KG PACK 10 F510-041 STANDARD

Fast Pack 6 x 1 kg SP106 RES/HARD FAST 6x1KG PACK 1 F510-119 STANDARD

Slow Pack 3.02 kg SP106 RES/HARD SLOW 3.02KG PACK 10 F510-042 STANDARD

Slow Pack 6 x 1 kg SP106 RES/HARD SLOW 6x1KG PACK 1 F510-120 STANDARD




Resin 20 kg SP106 RESIN 20KG 6 F510-051 ESSENTIALS

Resin 10 kg SP106 RESIN 10.0KG 12 F510-004 STANDARD


Fast 19.5 kg SP106 HARD FAST 19.5KG 100:18

(parts by weight)

1 F510-020 STANDARD

Fast 3.6 kg SP106 HARD FAST 3.6KG 1 F510-018 STANDARD

Fast 1.8 kg SP106 HARD FAST 1.8 KG (0.9x2) 1 F510-019 STANDARD

Slow 180 kg SP106 HARD SLOW 180KG


1 F510-033 STANDARD

Slow 19.5 kg SP106 HARD SLOW 19.5KG 1 F510-032 STANDARD

Slow 3.6 kg SP106 HARD SLOW 3.6KG 1 F510-053 ESSENTIALS

Slow 1.8 kg SP106 HARD SLOW 1.8KG (0.9x2) 1 F510-031 STANDARD

Extra-slow 19.5 kg SP106 HARD EXTRA-SLOW 19.5KG 100:18 (parts by weight)

1 F510-047 STANDARD

Extra-slow 3.6 kg SP106 HARD EXTRA-SLOW 3.6KG 1 F510-052 STANDARD

SP115 UV Stable, High Clarity Epoxy System

SP 115 Size Units Description Mix Ratio (R:H) MOQ

(Each) Order Code

Availability


Pack 6 x 1 kg SP115 RES/HARD BOX 6x1KG PACK 1 F110-028 STANDARD

Pack 5 kg SP115 RESIN/HARD 5KG PACK 10 F110-020 STANDARD



Resin 20 kg SP115 RESIN 20.0KG 6 F110-023 STANDARD


Hardener 16.5 kg SP115 HARD 16.5KG


1 F110-025 STANDARD

Hardener 6.66 kg SP115 HARD 6.66KG 1 F110-026 STANDARD

Hardener 6.66 kg SP115 HARD 6.66KG A/F 1 F110-027 SPECIALIST

LIQ

UID

SYS

TEM

S LIQU

ID SYSTEM

S






SP 320 Multi-purpose Epoxy Coating System

SP 320 Size Units Description Mix Ratio

(R:H) MOQ

(Each) Order Code

Availability


Pack 6 x 1 kg SP320 RES/HARD FAST 6x1KG PACK 1 F505-041 STANDARD

Pack 6 x 1 kg SP320 RES/HARD SLOW 5x1KG PACK 1 F505-042 STANDARD

Pack 4 kg SP320 RESIN/HARD FAST 4KG PACK 10 F505-028 STANDARD

Pack 4 kg SP320 RESIN/HARD SLOW 4KG PACK 10 F505-029 STANDARD





Fast Hardener 6.66 kg SP320 HARD FAST 6.66KG

100:33 (by weight)

1 F505-038 STANDARD

Fast Hardener 20 kg SP320 HARD FAST 20KG 1 F505-036 STANDARD

Slow Hardener 6.66 kg SP320 HARD SLOW 6.66KG 1 F505-039 STANDARD

Slow Hardener 20 kg SP320 HARD SLOW 20KG 1 F505-037 STANDARD

Slow Hardener 6.66 kg SP320 HARD SLOW 6.66KG A/F 1 F505-040 STANDARD

Eposeal 300 Wood Coating

Eposeal 300 Size Units Description Mix Ratio

(R:H) MOQ

(Each) Order Code

Availability

Pack 6 x 1 litres SP300 EPOSEAL RES/HARD 6x1L PACK 100:30 (by weight)

1 F705-020 STANDARD

Pack 5 litres SP300 EPOSEAL RES&HARD 5L PACK 10 F705-012 STANDARD LIQ

UID

SYS

TEM

S LIQU

ID SYSTEM

S






Ampreg™ Laminating Systems

The Ampreg™ wet laminating range consists of standard, commonly used laminating products, as well as systems with higher strengths and operating temperatures. A complete range of hardeners and modifiers give a wide variety of working times, viscosities and thixotropy.

Product Selector

System Properties At 25°C Mixed

Viscosity* 150g

Pot-Life* Earliest Time To Apply Vacuum*

Latest Time To Apply Vacuum*

Earliest De-mould Time*

Am

pre

g™

30 R

esin

Low initial mixed viscosity & good cure progression from ambient only cures, DNV-GL & Lloyd’s Register Certified, Replaces Ampreg™ 21

Ampreg™ 3X Fast Hardener 900 cP ½ hour 1 ½ hours 2 hours 3 hours

Ampreg™ 3X Standard Hardener 750 cP 1 hour 2 ½ hours 3 hours 6 ½ hours

Ampreg™ 3X Slow Hardener 350 cP 4 hours 4 hours 5 hours 16 hours

Ampreg™ 3X Extra-slow Hardener 300 cP 7 hours 6 hours 7 ½ hours 40 hours

Ampreg 3X High Tg Hardener 820 cP 8½ hour 7 ¼ hours 9 ¼ hours 60 hours

Ampreg™ 3X Thixotropic Pregel Resin additive with a grease-like consistency, used primarily as a thixotrope - to be added to low viscosity laminating resins for applications where resin drainage is a concern. Refer to product datasheet for more information.

Am

pre

g™

31 R

esin

Viscosity optimised for good fabric wet-out and drainage resistance, DNV-GL & Lloyd’s Register Certified, Replaces Ampreg™ 22

Ampreg™ 3X Fast Hardener 1300 cP ½ hour 1 ¼ hours 1 ¾ hours 2 ¾ hours

Ampreg™ 3X Standard Hardener 1000 cP 1 hour 2 hours 2 ¾ hours 5 hours

Ampreg™ 3X Slow Hardener 500 cP 3 ½ hours 3 ¼ hours 4 ¼ hours 12 hours

Ampreg™ 3X Extra-slow Hardener 400 cP 6 hours 4 ¼ hours 5 ½ hours 20 hours

Ampreg 3X High Tg Hardener 1110 cP 5 ¾ hour 4 ¾ hours 6 ¾ hours 30 hours


Am

pre

g™

36 R

esin

Improved fabric impregnation, Faster mechanical property generation, High flexural properties, Replaces Ampreg™ 26

Ampreg™ 3X Fast Hardener 700 cP ½ hour 1 ½ hours 2 hours 2 ¾ hours

Ampreg™ 3X Standard Hardener 450 cP 1 hour 2 ¼ hours 3 hours 5 ¾ hours

Ampreg™ 3X Slow Hardener 275 cP 3 ½ hours 3 ½ hours 4 ½ hours 13 hours

Ampreg™ 3X Extra-slow Hardener 200 cP 6 hours 4 ¾ hours 5 ¾ hours 21 hours


*working time properties are highly subjective to ambient conditions and should be used as an approximate guideline for all Ampreg™ systems at 25°C. Please refer to

the corresponding page of this document for specific testing methods used.

LIQ

UID

SYS

TEM

S LIQU

ID SYSTEM

S







Ampreg™ 3X Code Selector

Packs Size Units Description Mix

Ratio (R:H)

MOQ (Each)

Order Code

Availability

Ampreg™ 30 resin and hardener pack sizes

Fast Pack 1.26 kg AMPREG30 R/H FAST 1.26KG PACK 10 F127-035 STANDARD


Standard Pack 1.26 kg AMPREG30 R/H STANDARD 1.26KG PACK 10 F127-037 STANDARD


Slow Pack 1.26 kg AMPREG30 R/H SLOW 1.26KG PACK 10 F127-039 STANDARD


Extra-slow Pack 1.26 kg AMPREG30 R/H EXTRA-SLOW 1.26KG PACK 10 F127-041 STANDARD




















Resins Size Units Description Mix Ratio

(R:H) MOQ

(Each) Order Code

Availability

Ampreg™ 30 Individual resin component size

Resin 1000 kg AMPREG30 RESIN 1000KG 100:26

(parts by weight)


Resin 219 kg AMPREG30 RESIN 219KG 1 F127-002 ESSENTIALS




(parts by weight)






(parts by weight)



Resin 16.2 kg AMPREG36 RESIN 16.2KG 6 F127-089 ESSENTIALS

Ampreg™ 3X Thixotropic Pregel Individual resin component size

Resin 195 kg AMPREG3X THIXOTROPIC PREGEL 195KG Refer to TDS

1 F127-092 STANDARD

Resin 19.5 kg AMPREG3X THIXOTROPIC PREGEL 19.5KG 6 F127-091 STANDARD

LIQ

UID

SYS

TEM

S LIQU

ID SYSTEM

S






Hardeners Size Units Description Mix Ratio

(R:H) MOQ

(Each) Order Code

Availability

Use the mix ratio to select recommended hardener component size or refer to guidance below.

Fast 174 kg AMPREG3X HARD FAST 174KG 1 F127-006 ESSENTIALS

Fast 19 kg AMPREG3X HARD FAST 19KG 1 F127-007 ESSENTIALS

Fast 19 kg AMPREG3X HARD FAST 19KG A/F 1 F127-008 ESSENTIALS

Fast 4.68 kg AMPREG3X HARD FAST 4.68KG A/F 1 F127-010 STANDARD

Standard 174 kg AMPREG3X HARD STANDARD 174KG 1 F127-013 ESSENTIALS

Standard 19 kg AMPREG3X HARD STANDARD 19KG 1 F127-014 ESSENTIALS

Standard 19 kg AMPREG3X HARD STANDARD 19KG A/F 1 F127-015 ESSENTIALS

Standard 4.68 kg AMPREG3X HARD STANDARD 4.68KG A/F 1 F127-017 STANDARD

Slow 174 kg AMPREG3X HARD SLOW 174KG 1 F127-020 ESSENTIALS

Slow 19 kg AMPREG3X HARD SLOW 19KG 1 F127-021 ESSENTIALS

Slow 19 kg AMPREG3X HARD SLOW 19KG A/F 1 F127-022 ESSENTIALS

Slow 4.68 kg AMPREG3X HARD SLOW 4.68KG A/F 1 F127-024 STANDARD

Extra-slow 174 kg AMPREG3X HARD EXTRA-SLOW 174KG 1 F127-027 ESSENTIALS

Extra-slow 19 kg AMPREG3X HARD EXTRA-SLOW 19KG 1 F127-028 ESSENTIALS

Extra-slow 19 kg AMPREG3X HARD EXTRA-SLOW 19KG A/F 1 F127-029 ESSENTIALS

Extra-slow 4.68 kg AMPREG3X HARD EXTRA-SLOW 4.68KG A/F 1 F127-031 STANDARD

High Tg 194 kg AMPREG3X HIGH Tg HARDENER 194KG 1 F127-066 STANDARD

High Tg 16 kg AMPREG3X HIGH Tg HARDENER 16KG 1 F127-065 STANDARD

High Tg 5.22 kg AMPREG3X HIGH Tg HARDENER 5.22KG 1 F127-095 STANDARD


2 x 1000kg Ampreg™ 30 / 31 Resin = 3 x 174kg Ampreg™ 3X Fast – Ex-Slow Hardeners

2 x 1000kg Ampreg™ 30 / 31 Resin = 3 x 194kg Ampreg™ 3X High Tg Hardener

2 x 900kg Ampreg™ 36 Resin = 3 x 174kg Ampreg™ 3X Fast – Ex-Slow Hardeners

1 x 219kg Ampreg™ 30 / 31 Resin = 3 x 19kg Ampreg™ 3X Fast – Ex-Slow Hardeners

1 x 219kg Ampreg™ 30 / 31 Resin = 4 x 16.2kg Ampreg™ 3X High Tg Hardener

1 x 197kg Ampreg™ 36 Resin = 3 x 19kg Ampreg™ 3X Fast – Ex-Slow Hardeners

1 x 18kg Ampreg™ 30 / 31 Resin = 1 x 4.68kg Ampreg™ 3X Fast – Ex-Slow Hardeners

1 x 18kg Ampreg™ 30 / 31 Resin = 1 x 5.22kg Ampreg™ 3X High Tg Hardener

1 x 16.2kg Ampreg™ 36 Resin = 1 x 4.68kg Ampreg™ 3X Fast – Ex-Slow Hardeners

LIQ

UID

SYS

TEM

S LIQU

ID SYSTEM

S






PRIME™ Infusion Systems

The PRIME™ infusion system from Gurit has been used successfully for the single-operation moulding of components ranging from narrow carbon yacht masts, up to 80' yacht hulls and wind turbine blades. PRIME™ infusion resin has a much reduced viscosity and longer working time, which makes it ideal for infusing very large parts with complex reinforcements in one operation.

PRIME™ 27 is suitable for the female moulding of large, complex components incorporating advanced fibres such as carbon* and aramid. Typical projects include spars, hulls and reinforcing structures.

PRIME™ 27 offers outstanding performance in a variety of liquid infusion processes including SCRIMP, RIFT (resin infusion under flexible tooling), VARTM (vacuum assisted resin transfer moulding) and RTM (resin transfer moulding).

PRIME™ 27 resin uses a wide range of hardeners to give a range of working times and cure speeds. This enables the gel time of the resin to be closely matched to the required infusion time for any particular size of moulded part. It achieves excellent mechanical and physical properties, including a high Tg from a moderate (50°) post-cure.

The system has an exceptionally low exotherm characteristic, which allows thick sections to be manufactured without risk of premature gelation due to exothermic heat build-up. This low exotherm will also extend the life of the mould tools.

Product Selector

System Properties At 20°C** Mixed

Viscosity** 150g

Gel-Time** Latest Flow Under

Vacuum** Earliest Vacuum-Off

Time** Earliest De-mould

Time**

PR

IME

TM

27

Re

sin

Fast Hardener 260 - 280 1 hour 2 ¾ hours 4 hours 5 hours

Slow Hardener 265 - 285 4 ¾ hours 5 hours 11 hours 17 hours

Extra-slow Hardener 250 - 270 10 ½ hours 9 ½ hours 29 hours Not recommended without a post-cure

High Tg Hardener 500 - 520 5 hours - - Not recommended without a post-cure

*unidirectional carbon fibre is acknowledged difficult to infuse. Please contact a member of technical team before attempting a carbon infusion with PRIMETM 27.

**working time properties are highly subjective to ambient conditions and should be used as approximate guideline for all PRIMETM 27 systems at 20°C.

LIQ

UID

SYS

TEM

S LIQU

ID SYSTEM

S







Code Selector

PRIME™ 27 Size Units Description Mix Ratio (R:H) MOQ

(Each) Order Code

Availability


Fast Pack 4 kg PRIME27 R/H FAST 4KG PACK 10 F160-100 STANDARD

Slow Pack 4 kg PRIME27 R/H SLOW 4KG PACK 10 F160-098 STANDARD


Resin 1000 kg PRIME27 RESIN 1000KG 1 F160-043 ESSENTIALS

Resin 214 kg PRIME27 RESIN 214KG 3 F160-041 ESSENTIALS

Resin 18.6 kg PRIME27 RESIN 18.6KG 6 F160-057 STANDARD


Fast 900 kg PRIME HARD FAST 900KG

100:28 (by weight)

1 F160-072 STANDARD

Fast 180 kg PRIME HARD FAST 180KG 1 F160-018 STANDARD

Fast 20 kg PRIME HARD FAST 20KG 1 F160-015 ESSENTIALS

Fast 5.2 kg PRIME HARD FAST 5.2KG 1 F160-053 STANDARD

Fast 5.2 kg PRIME HARD FAST 5.2KG A/F 1 F160-096 STANDARD

Slow 900 kg PRIME HARD SLOW 900KG

100:28 (by weight)

1 F160-045 STANDARD

Slow 180 kg PRIME HARD SLOW 180KG 1 F160-032 ESSENTIALS

Slow 20 kg PRIME HARD SLOW 20KG 1 F160-031 ESSENTIALS

Slow 5.2 kg PRIME HARD SLOW 5.2KG 1 F160-054 STANDARD

Slow 5.2 kg PRIME HARD SLOW 5.2KG A/F 1 F160-094 STANDARD

Extra-slow 900 kg PRIME HARD EX-SLOW 900KG

100:28 (by weight)

1 F160-033 STANDARD

Extra-slow 180 kg PRIME HARD EX-SLOW 180KG 1 F160-028 STANDARD

Extra-slow 20 kg PRIME HARD EX-SLOW 20KG 1 F160-027 ESSENTIALS

Extra-slow 5.2 kg PRIME HARD EX-SLOW 5.2KG 1 F160-055 STANDARD

High Tg 178 kg PRIME HIGH Tg HARDENER 178KG

100:25 (by weight)

1 F160-089 STANDARD

High Tg 17.8 kg PRIME HIGH Tg HARDENER 17.8KG 1 F160-101 STANDARD

High Tg 4.7 kg PRIME HIGH Tg HARDENER 4.7KG 1 F160-102 STANDARD


3 x 1000kg PRIME™ 27 Resin = 1 x 900kg PRIME™ Fast / Slow / Ex-slow Hardener


2 x 1000kg PRIME™ 27 Resin = 3 x 178kg PRIME™ High Tg Hardener


1 x 214kg PRIME™ 27 Resin = 3 x 17.8kg PRIME™ High Tg Hardener

1 x 18.6kg PRIME™ 27 Resin = 1 x 5.2kg PRIME™ Fast / Slow / Ex-slow Hardener

1 x 18.6kg PRIME™ 27 Resin = 1 x 4.7kg PRIME™ High Tg Hardener

LIQ

UID

SYS

TEM

S LIQU

ID SYSTEM

S






Filled Systems

Gurit is a leading supplier of high performance epoxy products formulated to meet market and

customer needs. Gurit’s innovative approach and expertise in epoxy formulations continues to deliver

market leading products for a wide range of market segments. Gurit provides a complete range of

formulated products from in-mould gelcoats to multi-purpose systems.

Gurit manufactures a wide range of formulated resin products, based on epoxy, polyurethane and

vinylester chemistry. These formulations are unique combinations of chemicals that have been

blended together to yield products with characteristics optimised for their intended application. The

products have been extensively tested both for their handling and usage characteristics, and for the

properties that result from their curing.

The characteristics of thermosets mean that they can be formulated into a wide variety of forms, with

many different liquid-state properties and cured properties.

Gurit offers two types of filled systems:

¬ Filling and Fairing Compounds - epoxy based pastes, high adhesive ability and durability.

¬ In-mould Process Coats - epoxy process coats for in-mould application to achieve a defect free

surface ready for sanding and painting

FILL

ED S

YSTE

MS FILLED

SYSTEMS

http://guritnet.gurit.com/core/core_picker/download.asp?id=313&filetitle=PRO_IMG_033&log_stat=true






Filling and Fairing

Gurit’s filling and fairing systems for the finishing of component manufacture, offer a range of working times, good sand-ability and compatibility with a wide range of primers.

S-Fill 15 Minute Epoxy Filler System

Gurit’s S-Fill 15 Minute Filler is an epoxy filler system designed for rapid cure at ambient temperature, to allow sanding without clogging at just over an hour after application. As well as rapid cure and good sand-ability, the system has been developed to offer ease of dispense and mixing, good sag resistance during application, good cured properties. The system offers a simple 1:1 mix ratio, high levels of adhesion, low shrinkage and good thermal and mechanical properties.

S-Fair 600 Epoxy Fairing System

S-Fair 600 is a simple 1:1 by volume, two component filler designed for filling and fairinglarge composite and metal structures such as hulls and decks. It can be applied up to athickness of 35mm on a vertical surface. It is easy to sand and is compatible with a widerange of primers and top coats typically used in the marine market for the finishing of yachts.It is available with two hardeners; Fast and Standard, which enables the customer to tailorthe working/cure time to the ambient workshop temperature.

Code Selector

S-Fill 15 Min Size Units Description Mix Ratio (R:H) MOQ


Pack 2 litres S FILL 15 MIN. RES&HARD 2L PACK 10 F930-006 STANDARD

S-Fair 600 Size Units Description Mix Ratio (R:H) MOQ



Resin 10 litres S FAIR 600 RESIN 10L 12 F920-003 STANDARD

Resin 2.5 litres S FAIR 600 RESIN 2.5L 15 F920-001 STANDARD


Fast 10 litres S FAIR 600 FAST HARDENER 10L 1:1 (by volume)

10 F920-110 STANDARD

Fast 2.5 litres S FAIR 600 FAST HARDENER 2.5L 1 F920-111 STANDARD

Standard 10 litres S FAIR 600 STD HARDENER 10L 1:1 (by volume)

10 F920-004 STANDARD

Standard 2.5 litres S FAIR 600 STD HARDENER 2.5L 1 F920-002 STANDARD


1 x 10L S-Fair 600 Resin = 1 x 10L S-Fair Fast / Standard Hardeners

1 x 2.5L S-Fair 600 Resin = 1 x 2.5L S-Fair Fast / Standard Hardeners

FILL

ED S

YSTE

MS FILLED

SYSTEMS






In-Mould Process Coats

Our coating products are hard wearing and versatile partners for the prepreg and infusion systems. Available in a solvent-free formulations, Gurit's in-mould process coats are suitable for a range of applications and industries.

System Description Hardener Speed Mix ratio Intended Application

CR 3400

Easy to sand, in-mould epoxy surfacing system for epoxy laminates and is designed to be used as the base for the subsequent application of a paint scheme.

Standard 5 hours 100:30

(parts by weight)

Designed to be backed up with Ampreg laminating systems and Prime infusion systems to give a sand-able surface ready for painting.

Code Selector

CR 3400 In-mould Process Coat

CR 3400 Size Units Description Mix Ratio (R:H) MOQ



Pack 6.5 kg CR3400 RES/HARD STD 6.5KG PK 1 F346-012 SPECIALIST

Individual resin and hardener components

Resin 19 kg CR3400 RESIN 19KG 100:30 (by weight)

1 F346-013 STANDARD

Hardener 5.7 kg CR3400 HARD STD 5.7KG 1 F346-015 STANDARD

FILL

ED S

YSTE

MS FILLED

SYSTEMS






Tooling Systems

Gurit's formulated product range for tooling operations consists of a range of ambient curing mould materials that can be used up to an operating temperature of up to 160°C.

Product Selector

Type Product Operating

Temperature Description

Gelcoats T-Gel 130-1 130°C T-Gel 130-1 is an epoxy gelcoat system for manufacturing glass or carbonreinforced mould tools. T-Gel 130-1 is compatible with Gurit’s range of 130⁰C / 265⁰F

tooling laminating, infusion and repair materials.

Laminating Systems T-Lam 130-1 130°C T-Lam 130-1 is an epoxy tooling system designed for wet laminating glass or carbon moulds. T-Lam 130-1 is compatible with T-Prime 130-1.

Infusion Systems

T-Prime 130-1 130°C T-Prime 130-1 is a low viscosity epoxy tooling system for manufacturing infused glass and carbon moulds. It is compatible with T-Lam 130-1 laminating.

T-Prime 160 160°C T-Prime 160 is a low viscosity epoxy tooling system for manufacturing infused glass and carbon moulds.

Only our formulated products for tooling applications are shown on this page. Please

see the separate documentation of the Tooling business unit for plugs, moulds for

wind turbine blades and welded transport systems on www.gurit.com

TOO

LIN

G S

YSTE

MS TO

OLIN

G SYSTEM

S






Code Selector

Gelcoats

Laminating Systems

T-Lam 130-1 Size Units Description Mix Ratio (R:H) MOQ

(Each) Order Code

Availability

Resin 20 kg T-LAM 130-1 RESIN 20KG100:40 (by weight)

6 F140-202 STANDARD

Hardener 8 kg T-LAM 130-1 HARDENER 8KG 1 F140-205 STANDARD


1 x 20kg T-LAM 130-1 Resin = 1 x 8kg T-LAM 130-1 Hardener

Infusion Systems

T-Prime 130-1 Size Units Description Mix Ratio (R:H) MOQ

(Each) Order Code

Availability


Resin 185 kg T-PRIME 130-1 RESIN 185KG 1 F163-100 STANDARD

Resin 12.5 kg T-PRIME 130-1 RESIN 12.5KG 2 F163-102 STANDARD


Hardener 16.7 kg T-PRIME 130-1 HARD 16.7KG100:27 (by weight)

1 F163-106 STANDARD

Hardener 3.4 kg T-PRIME 130-1 HARD 3.4KG 1 F163-103 STANDARD


1 x 185kg T-PRIME 130-1 Resin = 3 x 16.7kg T-PRIME 130-1 Hardener

1 x 12.5kg T-PRIME 130-1 Resin = 1 x 3.4kg T-PRIME 130-1 Hardener

T-Prime 160 Size Units Description Mix Ratio (R:H) MOQ

(Each) Order Code

Availability


Resin 200 kg T-PRIME 160 RESIN 200KG 1 F166-003 STANDARD

Resin 20 kg T-PRIME 160 RESIN 20KG 6 F166-005 STANDARD


Hardener 180 kg T-PRIME 160 HARDENER 180KG100:35 (by weight)

1 F166-009 STANDARD

Hardener 17.5 kg T-PRIME 160 HARD 17.5KG A/F 1 F166-008 STANDARD


3 x 200kg T-PRIME 160 Resin = 1 x 180kg T-PRIME 160 Hardener

3 x 20kg T-PRIME 160 Resin = 1 x 17.5kg T-PRIME 160 Hardener

T-Gel 130-1 Size Units Description Mix Ratio (R:H) MOQ

(Each) Order Code

Availability

Pack 7.6 kg T-GEL130-1 RES&HARD 7.6KG PACK 100:49 (by weight) 3 F340-112 STANDARD

TOO

LIN

G S

YSTE

MS TO

OLIN

G SYSTEM

S






Reinforcements

Gurit supplies an extensive range of reinforcements suitable for composite component

manufacture and repair. These materials are based on the most widely used fibre types and

fibre orientations and incorporate a variety of construction techniques in their manufacture.

Our range of Reinforcements is presented by fibre type:

¬ Glass Products – E Glass

¬ Carbon Products

¬ Flax Natural Fibre Products

¬ Hybrid combinations of the above fibres

Then sub-divided into the following categories, based on the orientations of the primary

structural fibres / tows :

¬ Unidirectional Fabrics – A variety of construction styles with all structural fibres generally

running at 0° where optimum mechanical properties or local reinforcement is required.

The Style is generally Unitex (‘UT’) which offers a balance of handling properties.

¬ Woven Fabrics – A wide range of woven fabrics, available in plain, twill and satin weave

formations with fibres at 0°/90°.

¬ Multiaxial Fabrics – Stitched construction with fibres at +/-45° or 0°/90° (Double Bias),

0°/+45°/-45° (Triaxial) and 0°/+45°/-45°/90° (Quadraxial). These products offer excellent

mechanical properties, and have optimised fibre spread for high laminate quality.

¬ Tapes – Narrow (< 200mm) fabric versions of the above

Availability

The supply of dry reinforcements is subject to a minimum single roll quantity per style for

most items. Smaller quantities of fabric are available from Gurit’s network of distributors,

subject to cutting and handling charges.

This catalogue describes Gurit’s standard range of reinforcement materials. If your preferred

reinforcement is not listed in the following pages, please contact Gurit, as we can offer

alternative weaves, weights, fibres and fibre combinations in most styles. Non-standard

items may be subject to limited availability. Width availability may change from time to time.

For further information, confirmation of stock levels and technical advice on Gurit’s

reinforcement materials - please contact your local Customer Support Team. REI

NFO

RC

EMEN

TS R

EINFO

RC

EMEN

TS






Reinforcement Nomenclature

1st Letter: General Construction of Reinforcement Fabric

WR = Woven rovings - (glass)

R = Woven fabric - yarn (glass) or tows (carbon)

X = Double bias (±45°) stitched fabric

Q = Quadraxial (0°/90°/±45°) stitched fabric

Y = Triaxial (0°/±45°) stitched fabric

UT = Unitex woven low-crimp unidirectional fabric

UF = Unifibre non-woven unidirectional fabric

2nd Letter: Fibre Type (or Major Component in Hybrid)

E = E glass

S = S glass (or R glass)

C = Carbon

F = Flax

3rd letter: 2nd Fibre Type - Minor Component in Hybrid (as above);

also: (when present) T = Tape version

Final digit: Identifier to distinguish otherwise similar fabrics.

Suffix letter: For woven fabrics, the following suffixes indicate the weave:

P = Plain

T = 2x2 twill

S = 3x1 twill

T4 = 4x4 twill

Hx = Satin (where x = harness number)

C = Crowsfoot

B = Basket

Q = Quadran

Example: UT-C300/500

UD carbon in Unitex

Approximate reinforcement weight 300g/m2

Width 500mm

REI

NFO

RC

EMEN

TS R

EINFO

RC

EMEN

TS






E-Glass Reinforcements Code Selector

Description Weight (g/m2)

Width (mm)

Length (lm)

Quantity (m2)

Order Units MOQ (m2)

Order Code

Availability

Uni-directional Reinforcement Fabrics

UT-E500 498 500 100 50 m2 100 R161-021 SPECIALIST

0/90° Woven Yarn

RE86P 86 1050 100 105 m2 105 R111-008 ESSENTIALS

RE165T 160 1270 105 133 m2 133 R111-203 ESSENTIALS

RE210D 202 1300 106 137.8 m2 137.8 R111-120 ESSENTIALS

RE290T 292 1240 100 124 m2 124 R111-098 SPECIALIST

RE295H4 292 1240 105 130 m2 130 R111-113 ESSENTIALS

RE301H8D 300 1270 100 127 m2 127 R111-117 SPECIALIST

RE400T 390 1250 106 133 m2 133 R111-197 SPECIALIST

0/90° Woven Roving Yarn

WRE581T 580 1250 50 62.5 m2 250 R111-116 ESSENTIALS

±45° Double Bias Stitched Fabrics

XE304 311 1270 100 127 m2 127 R121-190 SPECIALIST

XE451 443 1270 85 108 m2 108 R121-187 SPECIALIST

XE603 603 1255 50 62.75 m2 125.5 R121-014 ESSENTIALS

XE905 900 1270 40 50.8 m2 50.8 R121-018 SPECIALIST

0/90/±45° Quadraxial Stitched Fabrics

QE624 627 1270 60 76.2 m2 76.2 R121-151 SPECIALIST

QE1174 1175 1270 35 44.4 m2 44.4 R121-153 SPECIALIST

0/90° Woven Tapes

RET160 160 50 50 2.5 roll 2.5 R111-053 SPECIALIST

RET160 160 100 50 5 roll 5 R111-055 SPECIALIST

±45° E-Glass Tapes

XET300 311 125 50 6.25 roll 62.5 R121-056 SPECIALIST

XET601 309 140 50 7 roll 7 R121-060 SPECIALIST

REI

NFO

RC

EMEN

TS R

EINFO

RC

EMEN

TS






Carbon Reinforcements Code Selector

NOTE: for shipments of dry carbon outside of the European Union, an Export Licence may be required.


Width (mm)

Length (lm)

Quantity (m2)


Order Code

Availability


UT-C200 204 500 150 75 m2 75 R163-039 SPECIALIST

UT-C300 294 500 125 62.5 m2 125 R163-040 ESSENTIALS



0/90° Woven Reinforcements

RC200T 194 1270 100 127 m2 127 R113-134 ESSENTIALS

RC203P* 203 1270 105 133.35 m2 533.4 R113-114 SPECIALIST

RC303T 300 1270 105 133.35 m2 133.35 R113-128 ESSENTIALS

RC416T 416 1270 50 63.5 m2 63.5 R113-083 ESSENTIALS

+ 45° Double Bias Stitched Fabrics

XC411 410 1270 100 127 m2 127 R123-006 ESSENTIALS

Unidirectional Reinforcement Tapes

RUCT300P 322 100 50 5 Roll 5 R163-107 SPECIALIST

RUCT500P 538 50 50 2.5 Roll 250 R163-054 SPECIALIST

RUCT500P 538 100 50 5 Roll 5 R163-057 SPECIALIST

±45° Double Bias Stitched Tapes

XCT411 410 140 50 7 Roll 63 R123-019 SPECIALIST

*powder coated

Flax Fibre Reinforcements Code Selector


Width (mm)

Length (lm)

Quantity (m2)


Order Code

Availability


UT-F150 150 1000 50 50 Roll 50 R167-003 SPECIALIST

UT-F300 300 350 50 17.5 Roll 17.5 R167-001 SPECIALIST

UT-F300 300 1270 50 63.5 Roll 63.5 R167-002 SPECIALIST

0/90° Woven Reinforcements

RF300T 300 1000 50 50 Roll 50 R117-002 SPECIALIST

0/90° Reinforcement Grids

RF215 14mm** 215 1150 50 57.5 Roll 57.5 R127-002 SPECIALIST

RF215 28mm** 215 1150 50 57.5 Roll 57.5 R127-003 SPECIALIST

+ 45° Double Bias Stitched Fabrics

XF350 350 1270 50 63.5 Roll 63.5 R127-001 SPECIALIST

**14 / 28mm corresponds with the reinforcement grid mesh size REI

NFO

RC

EMEN

TS R

EINFO

RC

EMEN

TS






Ancillary Products

In order to assist in the use of the wide range of materials manufactured and supplied by

Gurit, a range of Ancillary Products are also available. These have been refined over many

years to enable users to handle products safely and to obtain the very best results from Gurit

materials. The Ancillary Products are grouped together into four main categories:

Filler Powders A range of filler powders which are designed to modify the properties of some of the Gurit

liquid solvent-free resin systems, and so create resin mixes for use as fillers and adhesives.

The fillers form three distinct categories: hollow spheres, short fibres, and flow modifiers.

Hollow spheres

Increase the volume and reduce the density of any resin system and are used to make

adhesive mixes and filling & fairing mixes.

¬ Microballoons: Brown microsphere filler powder used to make glues or paste fillers.

¬ Glass Bubbles: White microsphere filler powder used to make glues or paste fillers.

Short Fibres

For adding strength to a resin and hardener mix used as a structural adhesive, short

reinforcing fibres are often added which act in a similar strengthening way to the long

reinforcing fibres used in composite construction.

¬ Microfibres: Cellulose fibres used to make adhesive mixes.

Flow Modifiers

The most common material for modifying the flow properties of a resin mix is colloidal silica.

This is a very fine powder which is added in conjunction with other fillers to ‘thicken’ mixes

and reduce their flow on vertical surfaces (increase thixotropy).

¬ Colloidal Silica: Fine, anti-sag, filler powder. Use in combination with other filler powders.

Solvents A range of solvents for cleaning tools and surfaces. Due to the very different chemistry of

some of the Gurit products from each other, it is important that the correct solvents are

selected for the intended application.

Pigments A range of pigments that can be added to some Gurit products to adjust the colour / visual

appearance. Please contact Gurit Technical Support for further guidance on the correct

usage / addition of pigments which can vary by product.

Application, Processing and Sundry items Pumps and dispense equipment, application and processing items and pigments.

AN

CIL

LAR

IES A

NC

ILLAR

IES






Code Selector

Filler Powders

Description Approximate Volume Size Units Order Code Availability

Hollow spheres

MICROBALLOONS 100G 1 litre 0.1 kg A225-002 STANDARD

MICROBALLOONS 0.3KG 3 litres 0.3 kg A225-003 STANDARD

MICROBALLOONS 5KG 50 litres 5 kg A225-005 STANDARD

MICROBALLOONS 12KG 120 litres 12 kg A225-007 STANDARD

GLASS BUBBLES 120G 1 – 1.5 litres (min order 5) 0.12 kg A230-005 STANDARD

GLASS BUBBLES 0.3KG 2 - 3 litres 0.3 kg A230-001 STANDARD

GLASS BUBBLES 5KG 30 - 50 litres 5 kg A230-003 STANDARD

Short Fibres

MICROFIBRES 100G 1 litre 0.1 kg A215-004 STANDARD

MICROFIBRES 0.5KG 5 litres 0.5 kg A215-003 STANDARD

MICROFIBRES 5KG 50 litres 5 kg A215-005 STANDARD

MICROFIBRES 10KG 100 litres 10 kg A215-008 STANDARD

Flow Modifiers

AMPRO™ COLLOIDAL SILICA 40G 1 litre 0.05 kg A220-007 STANDARD

AMPRO™ COLLOIDAL SILICA 250G 5 litres 0.25 kg A220-008 STANDARD

COLLOIDAL SILICA 0.25KG 5 litres 0.25 kg A220-003 STANDARD

COLLOIDAL SILICA 2.5KG 50 litres 2.5 kg A220-005 STANDARD

COLLOIDAL SILICA 10KG 200 litres 10 kg A220-006 STANDARD

Fillers

GRAPHITE POWDER (501) 0.75KG - 0.75 kg A235-001 STANDARD

Cleaning Solvents

Description Application Size Units Order Code Availability

SP FAST EPOXY SOLVENT 5L Surface degreaser 5 litres A105-003 SPECIALIST

SP STD EPOXY SOLVENT 5L By-product remover 5 litres A108-003 SPECIALIST

Please note, Gurit’s solvent-free epoxies such as AMPRO™ or Ampreg 3X should never have solvent added to

them to ‘thin them down’. If a lower viscosity, thinner epoxy product is required then this should be achieved by

gentle warming of the product, or warming the surface to which the product is applied. Note that any extra heat

applied will also accelerate the product’s rate of cure. Alternatively, there may be a different Gurit epoxy product

with a more suitable viscosity for the intended application. For the correct solvent for a given application, please

see the resin systems data sheet for details.

Pigments

Description Colour Size Units Order Code Availability

SP PIGMENT WHITE 0.5KG White 0.5 kg A445-002 STANDARD

SP PIGMENT BLACK 0.5KG Black 0.5 kg A445-004 STANDARD

AN

CIL

LAR

IES A

NC

ILLAR

IES






Code Selector Continued

Spabond™ Dispensing Equipment

Mix-heads and guns not available for individual 310ml single component cartridges.

Volume Description Size Units Order Code Availability

Dispense Guns

900ml Manual / PC Cox Gun, PPM 1 EACH K215-044 SPECIALIST

900ml Pneumatic / PC Cox Gun, PPA 1 EACH K215-039 SPECIALIST

600ml Pneumatic / PC Cox Gun, PPA 300A 1 EACH K215-050 SPECIALIST

400ml J2C400HV GUN, MAN. 400ML 1:1/2:1 1 EACH K215-070 STANDARD

400ml Pneumatic / Metix Gun DM400-85-01 1 EACH K215-022 STANDARD

Cartridge Mix Heads

900ml* Bag of 10 x 13.2mm, 32 Element round mix head (screw connection) 1 EACH A640-031* STANDARD

600ml Bag of 20 x 10.7mm, 19 Element square mix head (screw connection) 1 EACH A640-019 STANDARD

400ml** Bag of 20 x 10.7mm, 19 Element square mix head (screw connection) 1 EACH A640-019** STANDARD

*Note that from Q4 2019 this mix-head will be replaced with A640-021

**Suitable for 1:1 and 2:1 cartridge formats

Application, Processing and Sundry items

Description Comments Size Units Order Code Availability

Miscellaneous Dispense Equipment

10CC SYRINGE* 1cc graduations 1 EACH A660-001 SPECIALIST

50CC SYRINGE* 10cc graduations 1 EACH A660-002 SPECIALIST

25 LITRE DRUM TAP Small plastic 1 EACH K342-005 SPECIALIST

200 LITRE DRUM TAP Large plastic 1 EACH K342-010 SPECIALIST

AMPRO™ PUMP SET FOR 1.3KG PACKS 1 EACH K216-320 STANDARD

AMPRO™ PUMP SET FOR 4KG PACKS 1 EACH K216-321 STANDARD

Other Pump Sets Please contact Gurit Customer Support for pump set availability

Application and Processing Items

REUSABLE MIXING POTS 0.5L (0.8L MAX) Minimum order of 100 1 EACH A640-013 STANDARD

MIXING STICKS Box of 100 sticks 1 EACH A640-004 SPECIALIST

* Syringes should be washed with warm water and a mild detergent, then flushed with clean water and allowed to air dry before use.

AN

CIL

LAR

IES A

NC

ILLAR

IES


Contact

Website

Information on products can be found at our website www.gurit.com. The site contains the

most up to date information on all products, available to download in PDF format.

Contacting Gurit

Europe, Middle East and Africa Contacts (EMEA) Contacts

Main Switchboard Telephone Fax / email Role / Specialism

Gurit (UK) +44 (0) 1983 828 000 +44 (0) 1983 828 100

Sales & Customer Support

Email: [email protected]

Technical Services

Email: [email protected]

Engineering

Alex Shimell +44 (0) 7909 940220 [email protected] Industrial Practice

Rod Fogg +44 (0) 7813 713305 [email protected] Marine Practice

Paolo Manganelli +33 (0) 9 5087 8200 [email protected] Marine Raceboat Practice

Luke McEwen +44 (0) 7739 261 601 [email protected] Civil, Vehicles & Renewables Practice

Marketing & Corporate Communications

E-mail: [email protected]

CO

NTA

CT

CO

NTA

CT

mailto:[email protected]



Gurit EMEA Distributors

Country Company & Contact Contact Details

Balearics BM Composites - Ben Parnwell

T: +34 971 254 181

W: www.bmcomposites.com

E: [email protected]

Bulgaria Mediterana Import Export SRL- Constantin Lovas

T: +40 735 884 461

W: www.mediterana.ro


Czech Republic

T: +420 220 873 550

Skolil Kompozit - Dimitrij Skolil W: www.skolil.cz


Denmark HF Industri & Marine - Hans Fokdal

T: + 45 62 20 13 12

W: www.hfmarine.dk


Finland Kevra Oy - Jukka Leinonen

T: .+358 9 6126 820

W: www.kevra.fi


France Composites Distribution - Jean Francois Buleon

T: +33 4 67 4955 00

W: www.composites-distribution.com


Germany

CTM GmbH - Ralf Tapken

T: +49 46 21 955 33

W: www.ctmat.de


Lange & Ritter GmbH – Dirk Lange

T: +49 7156 2006 431

W: www.lange-ritter.de


Hungary Mediterana Import Export SRL- Constantin Lovas

T: +40 735 884 461



ItalyResintex Technology S.r.l - Laura Fabi

T: +39 0775 898 099

W: www.resintex.it


Netherlands Bouwmeester Advanced Composites Center - Jaco Bouwmeester

T: +31 20 665 2452

W: www.sp-bac.nl


Norway Hans Claussen AS - Jonas Claussen

T: +47 671 19400


Poland CHEM4POL - Tomasz Kaniewski

T: +48 505 453325

W: www.chem4pol.pl



Gurit EMEA Distributors Continued

Country Company & Contact Contact Details

Romania Mediterana Import Export SRL- Constantin Lovas

T: +40 735 884 461



South Africa AMT (Pty) Ltd - John Soper

T: +27 21 511 2669

W: www.amtcomposites.co.za

E:[email protected]

Spain Gazechim - Jose Antonio Berja

T: +34 (0) 961241032

W: www.gazechim.es


Sweden Scott Bader Scandinavia - Karl-Magnus Kramsjö

T: +46 (0) 346 101 00

W: www.scottbader.com


Switzerland VC Vertriebs AG - Thomas Brunartt

T: +41 44 833 6386

W: www.schiffsfarben.ch


Turkey Neva Marine Yat Malzemeleri Ltd - Nurettin Caliskan

T: +90 216 447 0600

W: www.nevamarine.com


United Arab Emirates

MTM Marine and Industrial - Mike Powell

T: +971 5 290 61897

W: www.masaood.com


United Kingdom

Marineware Ltd

T: +44 (0) 2380 624555

W: www.marineware.com


Mouldlife Ltd - John McHugh

T: + 44 (0) 1638 750679

W: www.mouldlife.co.uk

E: [email protected] C

ON

TAC

T CO

NTA

CT C

ON

TAC

T C

ON

TAC

T


Gurit EMEA Product Catalogue-31-1219

[email protected]

www.gurit.com

gurit product cataloguehec 200 400 35 2dpe 200 80 160 pp53-5948 standard hec 300 400 35 popa 150 60...

Documents