gva-hl-dl 02.04.13
TRANSCRIPT
Highlighter™ HL-DL Long Run Modular LED Delineation System
Highlighter™HL-DL is a long run modular LED lighting system designed for architectural delineation where long runs are necessary and it is undesirable, impractical or impossible to have numerous power feeds or power supplies.
Highlighter™HL-DL uses GVA Lighting’s proprietary power and control technology, INFINITY™, which allows it be installed in exceptionally long runs. Up to 672 modules can be connected to one feed for a single run of up to 200m.
The Highlighter™HL-DL system consists of LED modules, an aluminum mounting profile, a diffuser tube and a Power-Data Box. The LED module is a fully sealed, IP66, 300mm (1ft) linear luminaire with 18 LEDs, consuming a maximum of 5W each. Each module is connected end-to-end and snapped into the aluminum mounting profile, which is securely fastened to the mounting surface. The impact resistant, UV stable acrylic diffuser tube installs over the modules to present an evenly illuminated, deeply
2saturated line of light with a surface brightness up to 4000cd/m . The Power-Data Box supplies power and control data to the modules.
All components can be field installed with simple tools allowing for easy customization at the job site.
PG-HL-DL 02.04.131
Typical HL-DL Diagram
System components: Mounting Profile, Highlighter™Modules, Diffuser, Diffuser Shim and Power-Data Boxes are combined to create the complete installation. Mounting profiles are securely fastened to a building or other structure, modules are snapped into the profile and diffusers are snapped onto the profile to create the illuminated delineation effect. Diffuser shims are used to secure the diffuser to the mounting profile in case of strong wind.
Standard length for Mounting Profiles and Diffusers is 2400mm, while shorter lengths are used at the ends of runs to achieve specific lengths down to 300mm increments. 4800mm is the maximum possible length for single pieces.
Highlighter™ Modules can be configured as 1200mm long strings of 4 permanently connected modules or as single 300mm long units. Pre-assembled strings increase system efficiency by reducing losses at connections and cut down installation time by reducing the number of connections made on-site. While single modules are used at the ends of runs to achieve specific lengths down to 300mm increments.
DELINEATION RUN 1
DELINEATION RUN 2
POWER-DATA BOX(ES)
LINE VOLTAGE INPUT84~264VAC
CONTROL INPUT
POWER-DATA LEADER CABLE(Maximum 30m/100ft to first module)
DELINEATION DIFFUSER
HIGHLIGHTER™ MODULES
MOUNTING PROFILE
PG-HL-DL 02.04.132
Highlighter™ HL-DL Long Run Modular LED Delineation System
Highlighter™ Modules
Maximum Run Lengths (per 1 PDB)
Power-Data Box Specification Logic
FAMILY
PDB-2000PDB-3800
CONTROL**
NC - No Control1DMX - DMX Control, 1 Universe2DMX - DMX Control, 2 UniversesDALI - DALI ControlARTNET - ARTNET ControlTRIAC - TRIAC Control0-10V - 0-10V Dimming
INPUT VOLTAGE
110-240VAC - Single Phase System208VAC - Three Phase System
Sample Logic : PDB-2000-NC-208VAC
** Due to de-rating, minimum input voltage for 2DMX control is 200VAC Refer to SP-PDB-XXXX for full Power-Data Box specifications
PDB-2000 (90~199VAC)
PDB-2000 (200~264VAC)
PDB-3800 (180~264VAC)
200 HIGHLIGHTER™ Modules
366 HIGHLIGHTER™ Modules
672 HIGHLIGHTER™ Modules
HL-Module Ordering Logic
FAMILY
HL
LED COLOR
RGB2700K3000K3500K4000K5000K6500KRD - RedGR - GreenBL - Blue
CRI* (Optional)
H1 - High CRI, Minimum 90
STRING LENGTH
300 - 1 Module1200 - 4 Modules
Sample Logic : HL-1200-3000K
* CRI for standard LEDs is Minimum 80 High CRI, Minimum 90, available with 3000K and 4000K LEDs only, extra cost applies, 4000K by special order (longer lead time)
3mm0.12in
28.50mm1.12in
18 x 16.67mm
0.66in
16.67mm0.66in
HL-300, Single Module
297mm11.69in
31.25mm1.23in
1197mm47.13in
1 2 3 4
HL-1200, String of 4 Modules
Highlighter™ HL-DL Long Run Modular LED Delineation System
PG-HL-DL 02.04.133
Mounting Profile Ordering Logic*
Diffuser Ordering Logic*
Diffuser Shim Ordering Information*
FAMILY
PROFILE, HL, FABRICATED
FAMILY
DIFFUSER, HL-DL, ROUND, 50MM, IMPACT RES PMMA, SATINE WHITE
DIFFUSER, HL-DL, FLAT, 46MM, IMPACT RES PMMA, SATINE WHITE
Mandatory for outdoor applications to secure diffuser
FAMILY
DIFFUSER SHIM
COLOR
CM - Clear Matte Anodized, A41CUSTOM - Custom Color
PART NUMBER
120629120630120631120632120633120634120635120636
PART NUMBER
120459120460120461120462120463120464120465120466120664120665120666120667120668120669120670120671
PART NUMBER
240644
NOMINAL LENGTH** (mm)
30060090012001500180021002400
NOMINAL LENGTH** (mm)
3006009001200150018002100240030060090012001500180021002400
Mounting Profile and Diffuser Details
50mm1.97in
38mm1.50in
40.50mm1.59in
86.50mm3.41in
L
14mm0.55in
6mm0.24in
2mm0.08in
END-TO-END MOUNTINGleave 2mm gap between mounting profiles
leave 4mm gap between diffusers
MOUNTING SLOT DIMENSIONSuse appropriate fastener for mounting surface
MOUNTING HOLE PATTERN
MOUNTING PROFILE DIMENSIONS
NOMINAL
30060090012001500180021002400
Lmm29859889811981498179820982398
D1mm1504507501050600750900750
D3mm-------750
D2mm----7509001050750
in11.7323.5435.3547.1758.9870.7982.6094.41
in5.9117.7229.5341.3423.6229.5335.4329.53
in-------29.53
in----29.5335.4335.4329.53
Ask factory about colored diffuser to match mono color LED versions
* Ordering logic configurations and quantities may be determined by specific details fo your installation. GVA’s Applications team can assist in specifying the appropriate configurations and quantities and create a Bill of Materials in the quoting process.**Custom lengths for diffusers and mounting profiles up to 4.8m are available, consult factory.
46mm1.81in
67mm2.64in
67mm2.64in
38mm1.50in
40.50mm1.59in
L
D1 D2 D3
!
Flat Diffuser Round Diffuser
59.40mm2.34in
46mm1.81in
Highlighter™ HL-DL Long Run Modular LED Delineation System
PG-HL-DL 02.04.134
Accessories
FAMILY
HL-CABLE, TC-ER, 18AWG-3C, -40° TO 90° WET,600V, FT4, SUN RESITANT
FAMILY
HL-LEADER CABLE
FAMILY
HL-OUTPUT CABLE
FAMILY
HL-JUMPER CABLE
FAMILY
HL-CONNECTOR CAP(must be used at the end of each run)
PART NUMBER
280176
PART NUMBER
140170140171140172140173
PART NUMBER
140187140188140189140190
PART NUMBER
140191140192140193140194140197140198
PART NUMBER
230866
LENGTH
PER METER
LENGTH
5M10M20M30M
LENGTH
150MM300MM500MM1M
LENGTH
150MM300MM500MM1M5M10M
Installation Accesories
To complete your installation, accessories such as lead cables and jumper cables may be needed. Additional lengths of un-terminated cable may also be ordered for wiring between junction boxes. Maximum cable lengths specified in the system diagram (pg.2) must be observed. Only cable supplied by GVA Lighting, Inc. will be sufficient to maintain cULus safety certification.
HL-Connector Cap must be used on the output connector of the last module on each circuit in order to maintain safety requirements and IP rating.!
PG-HL-DL 02.04.135
Product Specifications
HL-DL (per 300mm segment)
Electrical Rated Input Voltage
Power Consumption
Rated Current for Circuit
380VDC
4.8W
5W
10A @ t 30°C, 8A @ t 50°Ca a
2Luminance (diffuser surface brightness)(cd/m )
18 x 3-in-1 RGB or mono color LEDs
399
661
1058
134
536
795
1156
3900
4000
Light Source
Control Interface
Fixture Connections
GVA Lighting's proprietory ZH control interface or No Control for On/Off only
IP68 rated mating connectors
Optical
Control
Certification &
Safety
Nominal
Typical
Maximum
Maximum
Red (RGB)
Green (RGB)
Blue (RGB)
Yellow (RGB)
Magenta (RGB)
Cyan (RGB)
White (RGB)
3500K
6500K
Housing
Rated Operating Temperature
Rated Lifetime (L70 @ 23°C)
Environment
Lisitngs
IEC Classification
50 x 86.5
1.97 x 3.41
0.5
1.1
Injection molded, flame retardant polymeric body and lens, potted and sealed
Extruded aluminum mounting profile, A41 anodized
Extruded PMMA diffuser, impact resistant, UV stable
-40°C to +50°C, -40°F to +122°F
115,000hrs
Dry or Damp or Wet Locations, 0-100% humidity, IP66
PhysicalWidth x Height
Weight
mm
inches
kg
lbs
cULus, CE, ROHS
Class 1 LED luminaire
Highlighter™ HL-DL Long Run Modular LED Delineation System
™CREATING NEW BEAUTY FOR OUR HOME PLANET
GVA Lighting, Inc. 3400 Ridgeway Drive, # 14Mississauga, Ontario L5L 0A2, CanadaPhone: + 1 905 569 6044Toll Free Phone (Canada and USA): 1 877 GVA LIGT or 1 877 482 5448Fax: + 1 905 569 9823 Email: [email protected]
gvalighting.com
Power-Data Box
Electrical Rated Input Voltage
Output Voltage
84~264VAC
380VDC nominal
200 modules
366 modules**
672 modules**
672 modules**
Input
Output Data
Length x Width x Height
Weight
Housing
Environment
No Control, DMX512, 2DMX512, DALI, ARTNET, TRIAC, 0-10V
GVA Lighting's proprietory ZH control interface or No Control for On/Off only
360 x 286 x 70
14.17 x 11.26 x 2.76
3.42
7.52
14ga. Aluminum, Black Powdercoat
Dry locations only
Control
Physical
@120VAC Input
@220-240VAC Input
mm
in
@120VAC Input
@220-240VAC Input
kg
lbs
Maximum Modules per PDB-2000 (2000W)
Maximum Modules per PDB-3800* (3800W)
* Under development**For RGB version, max length is 341 modules (2 DMX universes) for 300mm/1ft addressabilityThese figures are subject to change due to further development and innovations.See SP-PDB-XXXX for full Power-Data Box specifications