h053d 8126 dvd usb 说明书...page7 page8 1.searchforwardkey cd/usb/sd 2.searchbackwardkey...
TRANSCRIPT
RADIO CON DVD USB Y LECTORS DE TAJETARSSX-3102DSD
ESTIMADO CLIENTECon el fin de que obtenga el mayor desempeño de su producto, por favor lea estemanual de instrucciones cuidadosamente antes de comenzar a utilizarlo, yguárdelo para su futura referencia.Si necesita soporte adicional, no dude en escribir a: [email protected]
14
4
23
76
60 62
61
26
2425
22
13
910 11 12 8 3
0/10 10+
VOL SKIP
39
41
44 4546
11
59
12
52
56
35
34
36
37
40
43
47
48
49
50
9
51
10
3
5354
57
58
63
2 1
42
55
51516
17
1819
20
38
21
+
-
161718192021
15
Page 7Page 6
FFX2 FFX4 FFX8 FFX20 PLAY
FRX2 FRX4 FRX8 FRX20 PLAY
2833 32 30 27 31
29
Page 9Page 8
12V DC
Page 11Page 10
Page 13Page 12
Page 15Page 14
Page 17Page 16
Page 19Page 18
Page 21Page 20
:DC 12V (UM-2x8):DC JACK:DC 12V
Page 2
SAFETY INSTRUCTIONS
1. READ INSTRUCTIONS- All the safety and operating instructions should be read before theappliance is operated.
2. RETAIN INSTRUCTIONS- The safety and operating instruction should be retained forfuture reference.
3. HEED WARNINGS-All warnings on the appliance and in the operating instructions shouldbe adhered to.
4. FOLLOW INSTRUCTIONS-All operating and use instructions should be followed.5. WATER AND MOISTURE- The appliance should not be used near water, for example, near
a bathtub, washbowl, Kitchen sink, laundrytub, swimming pool or in a wet basement.6. VENTILATION-The appliance should be situated so that its location or position does not
interfere with its proper ventilation. For example, the appliance should not be situated on abed, sofa, rug or similar surface that may block the ventilation openings.
7. HEAT-The appliance should be situated away from heat sources such as radiators, stoves,or other appliances(including amplifiers) that produce heat.
8. POWER SOURCE-The appliance should be connected to a power supply only of the typedescribed in the operation instructions or as marked on the appliance.
9. GROUNDING-Precautions should be taken to ensure that the grounding means of anappliance is not defeated.
10. POWER CORD PROTECTION-Power supply cords should be routed so that they are notlikely to be walked on or pinched by items placed upon or against them, paying particularattention to cords at plugs, convenience receptacles and the point at which they exit fromthe appliance.
11. POWER LINES-An out door antenna should be located away from power lines.12. NON-USE PERIODS-The power cord of the appliance should be unplugged from the outlet
when the appliance is to be left un-used for a long period of time.13. OBJECT and LIQUID ENTRY-Care should be taken so that objects do not fall and liquids
are not spilled into the enclosure through openings.14. DAMAGE REQUIRING SERVICE-The appliance should be serviced by qualified service
personnel when:A. The power-supply cord or plug has been damaged.B. Objects have fallen into, or liquid has been spilled into the appliance enclosure.C. The appliance has been exposed to rainD. The appliance has dropped, or the enclosure damaged.E. The appliance does not appear to operate normally or exhibits a marked change in
performance.15. SERVICING-The user should not attempt to service the appliance beyond that described in
the user's operating instructions. All other servicing should be referred to qualified servicepersonnel.
16. ATTENTION-While this cassette deck offers a recording facil ity, the manufacturer wishesto point out that recording copyright material required prior consent from the copyrightowners.
NOTES:1) It is preferred to retain CD inside the unit even when it is not in use. This prevents dust
accumulation on optical lens.
Page 1
PREMIER CUSTOMER SERVICE
NOTEThis unit may be submitted to changes in specifications characteristics and or operation without prior, /notice to the user in order to conti, nue improving and developing its technology.
CAUTIONRISK OF ELECTRIC
SHOCK DO NOT,OPEN
Caution To reduce the risk of electric shock do not open:this device there are not se, rviceable parts for customers.Please refer any maintenance or repair to qualifiedpersonnel.
This sign means the existence of dangerous voltage atthe inside of the unit which states a risk of electric shock, .
This sign means that there are important instructions ofoperation and handling in the manual that comes with thisdevice.
300-5185Panama:01-900-331-PEJC (7352)
:
Page 4
PLAYING THE VIDEO CD
TO ENJOY GOOD QUALITY VIDEO & AUDIO
3.STORAGE
BASIC OPERATIONYou can play video CD's with PBC (Version 2.0) function. Before you begin, make sure you'veconnected the system to a TV correctly and firmly.Turn on the TV and select the video input so that you can view the pictures from the system.
Discs should be kept clean at all times. Stains, scratches and dust on disc's surface cause badquality video and audio. Never touch disc surface.
After removing a disc from the unit, be sure to put it back in its case.Do not expose discs todirect sunlight, high temperatures from a heater, etc, high humidity, or dust.Cleaning discs before loading a disc, wipe off any dust, dirt or fingerprints with a soft cloth.Discs should be cleaned by wiping radially, from the center to the edge.
FROM THE CENTER TO THE EDGEThis unit has been designed to play 8cm or 12cm compact discs bearing the identificationlogo shown on the disc. Never use thinner, benzene, record cleaner or antistatic spray on acompact disc.
Correct Incorrect
Page 3
COMPACT
DIGITAL AUDIO
2) Dirty or scratched CD may cause skipping problem. Clean or replace the CD.3) If an erroneous display or malfunctions occurs, disconnect the AC Cord and remove all the
batteries(where applicable) to turn off the display. Then turn the power back on.
- No naked flame sources, such as lighted candles. Should be placed on the apparatus.- The apparatus shall not be exposed to dripping or splashing and that no objects fil led with
liquids, such as vases, shall be placed on the apparatus.- Disconnect the power sources by pulling the mains plug, mains plug shall remain readily
operable.
Since dirty, damaged or warped discs may damage the unit, care should be taken of thefollowing items:1. a. Usable compact discs
Use compact disc only with the mark shown on the disc.
2. A Notes on handling discsRemoving the disc from its storage case and loading it.PRESS THE CLAWS AT THE CENTER OF THE DISC CASE.
INSERT WITH THE LABLE FACING UP.
LIFT UP WITHOUT TOUCHING THE RECORDED SURFACE
PRESS THE DISC GENTLY TO INSERT IT.DO NOT PASTE OR WRITE ANYTHING ON THE SURFACE.Do not bend compact discs.Incorrect
BEFORE OPERATION NOTES-CONCERNINGCOMPACT DISCS.
.
B NOTES ON VIDEO CDS.This player confirm version 2.0 of video CD standards. You can enjoy the playback according tothe disc i.e. Video playback(moving pictures) as well as music.
Small impact while video disc is playing can cause abnormality on pictures.- Because video disc reproduces data compressed in 1/100 of regular disc, even a minor
scratch on its surface can cause enormous influence on video and audio and even makethe disc unusable. Therefore, more care is required.
- A mosaic with faint checker pattern can appear on the pictures with many movements anddetailed motion, however this is not a defect.
- While Audio CD is playing, video logo is displayed on the TV screen. However this is not adefect.
CAUTION
1. When the unit is brought from a cold place to a warm place, and there is a largetemperature difference.
2. When a heater starts operating.3. When the unit is brought from an air-conditioned place to a place of high temperature with
high humidity.4. When there is a large different between the internal temperature of the unit and ambient
temperature, or in conditions where condensation occurs easily.- Protect your unit/ set from rain, fire, moisture, sand, dust, chemicals & excessive heat (e.g.
Near heating equipment or in vehicles parked under the sun)
LOCATION CONTROLS OF UNIT
FRONT VIEW
TOP VIEW
14
4
23
76
60 62
61
2833 32 30 27 31
29
Page 5 Page 6
BACK VIEW
LOCATION CONTROL OF REMOTE CONTROL
0/10 10+
VOL SKIP
39
41
44 4546
11
59
12
52
56
35
34
36
37
40
43
47
48
49
50
9
51
10
3
5354
57
58
63
2 1
42
55
51516
17
1819
20
38
21
+
-
26
2425
22
13
910 11 12 8 3
Page 7 Page 8
1.SEARCH FORWARD KEYCD/USB/SD
2.SEARCH BACKWARD KEYCD/USB/SD
3.REPEAT KEYCD/USB/SD
4.POWER ON INDICATOR5.
6.FM STEREO INDICATOR7.REMOTE SENSOR
CD/USB/SD8.MODE KEY
CD/USB/SD DISC, USB OR SD(CARD)9.SKIP FORWARD KEY
CD/USB/SD10.SKIP BACKWARD KEY
CD/USB/SD11.DISC PLAY/PAUSE KEY
CD/USB/SD12.DISC STOP KEY
CD/USB/SD13.FUNCTION SWITCH
USB/SD14.VOLUME KNOB
In mode: To search up during play. The disc will be scanned quickly in forwarddirection. When playing VCD, each time you press this button the TV screen showsorderly:
In mode: To search down during play the disc will be scanned quickly in backwarddirection. When playing VCD, each time you press this button the TV screen shows orderly:
In mode: a single track or all tracks are played repeatedly. The repeat mode ischanged in the following cyclical manner:
In mode:To receive the signals from remote control
In mode: To select the mode
In mode: To select next track
In mode: To select previous track
In mode: To start or interrupt the play
In mode: To stop the play
To select the function of set: RADIO/TAPE/DVD( )
INTROIn disc mode: To scan through a disc
Press this to open the CD door
In radio mode: To select the receiving band
In CD mode: To mute the sound
In CD mode: To select the desired track directly
During DVD playback, press<SUBTITLE> repeatedly to select from 32 subtitle languages.
During DVD playback, press<ANGLE> to view scenes from different camera angles.Press<ANGLE> repeatedly to change from one camera angle to another.
In VCD/DVD mode: To select the color system(PAL/NTSC)
In CD mode, this key used for setting of program
When press this key, a list of various tracks will be shown.Remark: This feature is only applicable to VCD2.0 Disc
In CD mode: To select four digits time& to start play from that instant.
In CD mode: To decrease volume level
In CD mode: To increase volume level
22.CD DOOR PUSH OPEN
23.TUNING KNOB24.DIAL SCALE25.BAND SWITCH
26 CD DOOR27.PHONE JACK28.29.BATTERY DOOR30.31.AC SOCKET32.33.34.MUTE KEY:
35.DIRECT(NUMBER) KEY:
36.LANGUAGE KEY37.SUBTITLE KEY
Note: This function is disc specific (language will vary).38.3D SOUND KEY39.ANGLE KEY
40 N/P KEY
41.SET UP KEY42. KEY43. KEY44.RETURN KEY45.PROGRAM KEY
46.PBC KEY
47.TIME KEY
48.VOL – KEY
49.VOL + KEY
.
12V DC JACK
AUDIO OUT
VIDEO OUTMIC JACK
.
15.# KEYIn karaoke mode: To high pitch your voice.
16. KEY
17. KEY
18.OSD KEY
19.STEP KEY
In karaoke mode: To keep original voice
In karaoke mode: To low pitch your voice
In DVD mode: To select the on screen display
In DVD/VCD playback mode: To watch the stil l picture frame by frame
21.RANDOM KEYIn CD mode: To play all the tracks randomlyFFX2 FFX4 FFX8 FFX20 PLAY
20.VIEW KEYIn DVD/VCD stop mode: To display 9 screen preview
FRX2 FRX4 FRX8 FRX20 PLAY
Page 9 Page 10
50 CLEAR
SD/MMC CARD SLOTSD/MMC CARD READING INDICATOR
.Press <CLEAR> to delete numbers you have selected.Press once to delete one digit.Press and hold to delete all digits.51.SLOW KEY
52.RESUME KEY
53. KEY54.ENTER KEY55. KEY56.TITLE KEY
57.MENU KEY
58.R/L KEY59.A-B KEY60.USB JACK61.62.63.ZOOM KEY
In VCD/DVD mode: To see the picture in slow motion
In CD mode: To start playback a disc again from where you have stopped
During DVD playback, press <TITLE> to display the DVD title menu or play the first title.
During DVD, VCD playback(with PBC on), press <MENU> to return to the program menu.In the Setup Menu, press<MENU> to return to the main menu or stop mode.Any time, Press<MENU> to cancel the current OSD or some menus.
(to enlarge the image)
AC OPERATION
DC OPERATION
This unit is designed to operate on AC 110/220V ~ 50/60Hz household mains supply,connect the power cord to the hose socket.
1. Open the battery compartment cover.2. Insert 8 pieces UM-2 of “C” tape batties into battery compartment. Be sure to battery's
polarity as shown in the diagram engraved on the battery compartment.3. Place the battery compartment cover.
NOTE:
INSTALLATION
NOTE:
OPERATION VCD/CD/MP3 DISC
Playing the entire disc
SELECTING A DIFFERENT TRACK DURING PLAY
SELECTING PARTICULAR PASSAGE DURING PLAY
PROGRAMMED PLAYBACK
The battery circuit is disconnected automatically, when the AC cord is inserted to the AC INPUTsocket, then operate by AC. Remove all the batteries from battery compartment, when the unit isno longer operated by battery.
Unpack all parts and remove protective material.Insert the batteries (2x UM-4/Size “AAA”) into the remote control transmitter in the batterycompartmentDo not connect the unit to the mains before checking the main voltage & before all otherconnections have been made.Do not cover any vents and make sure that there is a space of several centimeters around theunit for ventilation.
1. The disc type mentioned in the bracket indicates that the feature is applicable formentioned disc only.
2. On screen display of stopping hand indicate that the pressed key is invalid.
1. Press CD DOOR OPEN(22) to open the CD Door.2. Insert the CD printed side up in the tray.3. close the CD door
1. After inserting the disc, the CD player scan the contents list of the CD and starts playing thefirst track immediately and display the current track being played.
2. When all tracks have been played, the CD player stops and shows total no. of tracks on thedisplay.
3. To stop play press STOP(12)4. To interrupt play, press PLAY/PAUSE 115. To resume play, press PLAY/PAUSE 11
1. Press SKIP FORWARD 9 or SKIP BACKWARD ntil the required track numberappears in the display or use DIRECT KEYS (35) to select the desired track.
2. Shortly after selection, the chosen track will start playing.
1. Press SEARCH FORWARD 1 or SEARCH BACKWARD DOWN 2 to start searchfor the required passage.
2. Press PLAY o return to normal play.
Inserting the disc
((
( (10)
( (
(11)
))
)
) )
u
t
Page 11 Page 12
1. Load a CD as described under “Inserting the disc”.2. Press STOP(12) to activate stop mode.3. Press the PROGRAM KEY (45) following menu appears on TV Screen, “The program
menu. Program 00:00”.4. Press the DIRECT KEYS(35) of the tracks you want to program in the order.5. Use 10+ KEY to program 10 and above tracks. It adds 10 digits every time when you press
it.Example: to select 43rd track press 10+ key four times & then 3 key.6. Press PLAY 11 to start program play.
1. Select desired track by pressing the SKIP FORWARD 9 KIP BACKWARD 10KEYS. The selected track will start playing.
2. Press the REPEAT KEY (3) once. “REP” will be flashed in the display.3. The selected track will continuously play to the end, and repeats from beginning till
STOP key is pressed.4. Press the REPEAT KEY (3) twice during play, the repeat indicator will go off, repeat play
will ends and normal play will resume from where the track was played.
1. Press the REPEAT KEY(3) twice. “REP” will be displayed in the display.2. The disc will play through to the end of the last track. At which point it will automatically
return to first track of the disc. The CD player will continue to repeat all of the tracks on thedisc until the STOP KEY 12 is pressed.
3. Press the REPEAT KEY(3) once during play, the repeat indicator will go off, repeat play willend & normal disc play will resume from that point.
When playing VIDEO CD's with PBC functions (Ver. 2.0 disc), you can enjoy playing simpleinteractive software, software with search functions etc.
1. Start playing a VIDEO CD with PBC functions.2. Press the “PBC” KEY(46) until “PBC ON” appears on TV Screen. Then PBC menu will
appear on the TV Screen3. Press SKIP FORWARD 9 or SKIP BACKWARD 10 to select the menu & press
PLAY KEY 11 to start the play from selected menu.4. Also press DIRECT KEY(35) to play the item which you want.
1. Press the “PBC” button (46) until “PBC OFF” appears on screen.
If your disc is video CD 2.0, and the player set to PBC ON, press Stop(12) to stop play thenpress RETURN(44) to go to video CD main menu.If your disc is not video CD 2.0 OR THE PLAYER SET TO PBC OFF, this key is invalid.
th
(
( (
( (
)
)/ )
( )
) )( )
REPEAT DISC PLAY:
For Repeat Play of one track:
OPERATION/VIDEO CD'S WITH PBC FUNCTIONS(PBC PLAY BACK):
For Repeat Play of one track:
PBC Allows to play VIDEO CD's Interactively following the menu screen on the TV Screen:
To Cancel PBC play back of a Video CD with PBC functions & Play the disc in you cancontinuous play mode:
OPERATION RETURN(VCD):
S
OPERATION/MUTE (VCD/MP3):
OPERATION R/L(CD/VCD/MP3):
OPERATION /TIME(CD/VCD):
OPERATION /RESUME(CD/VCD):
OPERATION /SLOW MOTION:
OPERATION /DVD
Press Mute(34) to terminate the sound output. Press again to cancel this mode.
Press the R/L Key(58) to choose the audio mode.Press R/L Key(58) again to change the audio mode as follows-MONO L, MONO R, STEREO,STEREO VOCAL L, SETEREO VOCAL R.
Press Time(47) during playback & enter the 4 digit time using direct keys(35) to start the playfrom that instant.
Press RESUME(52) during Play/Stop mode to start playback again from where you havestopped.
You can use the remote control to slow motion the play at four speed.Press SLOW (51), the player start to play slowly, ”slow 1” displayed on TV screen.Press SLOW (51) again and “slow 2” is displayed on TV Screen. Press SLOW (51) again and“slow 3 ” is displayed on TV Screen. Press SLOW (51) again and “Slow 4” is displayed on TVScreen.To cancel slow motion press PLAY(11)Note: Sound is muted during slow operation.
1.SETTING OF THE SYSTEMPress the SETUP button on the remote control, the general setup menu will be display.
SOURCETO select different functions between DISC, USB and CARD
SETTING SETUP
TV SYSTEMThis product supports output of various system, including NTSC\PAL\PAL60\AUTO.
POWER RESUMEPress direction key to adjust. If choose “ON”, when you turn on this player. The Disc will beplayed continuously from interrupted playing time. If choose “OFF”, the Disc will be played frombeginning.
VIDEOS-VIDEO: for S-VIDEO input
Page 13 Page 14
TV TYPE1. 4:3 PS(Panorama scanning): for commonly size TV.2. 4:3LB (mail drop): for commonly size TV.3. 16:9 (wide screen): for wide screen TV.
PASSWORDThe default password is 0000.
RATINGYou can choose to have lock function on your disc.
DEFAULTSelecting this option will restore the default settings.
Page 15 Page 16
LANGUAGE SETUPOSD LANGUAGE: using the direction keys to browse, press ENTER key to select your desiredoption. There are 6 languages in this option: English/ Chinese/ German/ Spanish/ French/Portuguese.
AUDIO LANGUAGE: using the direction keys to browse, press ENTER key to select yourdesired option. There are 8 languages in this option: Chinese/ English/ Japanese/ French/Spanish/ Portuguese/ Latin/ German.
SUBTITLE LANGUAGE: using the direction keys to browse, press ENTER key to select yourdesired option. There are 8 languages in this option: Chinese/ English/ Japanese/ French/Spanish/ Portuguese/ German.
MENU LANGUAGE: using the direction keys to browse, press ENTER key to select your desiredoption. There are 8 languages in this option: Chinese/ English/ Japanese/ French/ Spanish/Portuguese/ German/ Latin.
AUDIO SETUPMIC SETUP auto and off.
Page 17 Page 18
KEY, press direction key, with key install.
ECHO press direction key to adjust ECHO
MIC VOL press direction key to adjust MIC VOL
VIDEO SETUPBRIGHTNESS: press direction key, to adjust brightness.
CONTRAST: press direction key, to adjust video out contrast.
HUE, use the direction keys to adjust the hue of the video.
ATURATION, press direction key, to adjust video out saturation.
HARPNESS
S
S
Page 19
SPEAKER SETUP
DIGITAL SETUP
DOWNMIX press direction key to select LT/RT, STEREO, VSS.
OP MODE: there are 2 options for this selection: LINE OUT/ RF REMOD.LINE OUT is suitable for night made playing as its input signal is linearity constricted, witha lower sound volume.RF REMOD is suitable for daytime playing as its volume is higher.
DYNAMIC RANGE: when “l ine out” is selected, adjust to get different effects.
DUAL MONO, this item output L, R signal stereo, mono L, mono R and Mix mono.
OPERATION USB/SD/MMC CARDHow to play the audio saved in your USB?
Warning:
How to play the audio saved in your SD/MMC card?
SD/MMC card to the SD/MMC Card slot,CARD READING INDICATOR
1. Set the Function switch to DVD/USB/SD position.2. Connect the USB device to the USB jack, it starts playing the music saved in the USB
device automatically.Press & hold the Cassette door while pulling out your USB device.
1. Set the Function switch to DVD/USB/SD position.2. Insert your it starts playing the music saved in
the USB device automatically. Meanwhile, the lights up.
Page 20
OPERATION/ RADIO:
ANTENNAS:
FM STEREO:
HOOKING UP THE DVD PLAYER TO A TV, AND/ OR AMPLIFIER:
When listening to the sound through speakers connected to an amplifier:
Setting the color system button:
1. Select FUNCITON SWITCH(13) to RADIO.2. Set the BAND SWITCH(25) to desired radio band.3. Select radio station by rotating the TUNING KNOB(23)
FM: Telescopic Rod Antenna. Extend the rod antenna to improve reception.AM: The built-in ferrite antenna is directional. Rotate the unit until the best reception isobtained.
While listening to FM stereo broadcast FM stereo indicator (6) will light up. If stereo signal isweak, set FM ST/FM MO. Switch to FM MO. The station will be received in Mono but thebackground noise will be reduced.
When listening to the sound through TV speakers:1. Connect Audio Connection cord between AUDIO OUT SOCKET (30) of DVD player &
AUDIO IN (L&R) of TV.2. Connect Video connecting cord between VIDEO OUT SOCKET(32) of DVD Player &
VIDEO IN SOCKET of TV.
1. Connect Audio connecting cord between AUDIO OUT SOCKET(30) of DVD player and CDIN SOCKET (L&R) of Amplifier.
2. Connect Video connecting cord between VIDEO OUT SOCKET(32) of DVD player andVIDEO IN SOCKET of TV.
This player confirms to the NTSC and PAL color systems. Set the NTSC/PAL (N/P) Button (40)on the Remote control to the appropriate, according to your TV.If the color system of your TV is NTSC: Set the NTSC/PAL button (40) to NTSC. If the colorsystem of your TV is PAL: Set the NTSC/ PAL button (40) to PAL.
Page 22Page 21
Specifications
Power supply :AC MAINS 110/220V~50/60Hz SUPPLY:DC 12V (UM-2 x 8)
Dimensions of UnitRadio Freq-Range :AM 530-1600KHz
FM 88-108MHzAntenna :FM: TELESCOPIC ROD ANTENNA
AM: FERRITE BAR ANTENNATape section :NO. OF TRACK/ CHANNELS
-4TRACK STEREOPHONIC.TAPE SPEED:4.76 cm/sec.DC BIAS RECORDINGERASING SYSTEM: PERMANENT MAGNET.
CD Size :5” & 3” COMPATIBLE.Speaker Size :3 INCHRemote Control :52 KEYS, BATTERY SIZE IS 2 x UM -4 SIZE “AAA”.Mic Socket :6.3mm.Video out & Audio out :3.5mm RCA TYPE.
Power consumptions :24W
:
:
DC JACK DC 12V:
: 300(W)X270(D)X138(H)mm