h22 series linear solenoid push pull · pdf file15 25 20 m3 32 8 ø 8 2 48,5 0,5 3,5 15...
TRANSCRIPT
Weight:Complete solenoid: appr. 65 gArmature: appr. 13 g
Standard:Voltage: 24 V DCFlying leads: 10 cm
Insulation class: B (max. permissibletemperature = 130 °C)
Long life expectancy through plasticbobbin armature bearing.* On request, the solenoid can also besupplied with service-free DU armaturebearing for maximum durability.
Force vs. Stroke diagram F = f (s)
Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature
stroke s = 0 corresponds to armature infully home position
Force vs. stroke characteristics measured withoutreturn spring
H D* 22 06 – F – 24 V DC 100 % ED Order specifications
H Linear solenoidD* DU armature
22 SizesDesign type
06
4686-R
Pull type solenoid
Thrust type solenoid
Combi type solenoid with return spring2)
Coil terminalsF Flying leads (10 cm standard length)A Push-on connector (optional)
24 Nominal voltage (standard voltage)3)
100 % ED Perm. duty cycle under air cooled conditions (LK)
H2246-F
24 V DC 100%ED
2) Series H 2286-R-... solenoids are available withreturn spring F (0 mm) = 1.5 N and F (5 mm) =0.2 N
3) Other DC voltages are available on request.
100 45 25 15 5 % Perm. duty cycle (ED)4)
5,2 10,2 19 29,5 75 W Nominal coil power Pn24 7 ms Actuation time (ED)
4) If solenoid is mounted directly onto a flat metalsurface of at least 45 cm2, the duty cycle can beextended up to 1.3 x nominal rating
0 1 2 3 4 5
s/mm
F/N
0,1
0,2
0,5
30 %ED
100
45
25
5
15
1
23457
10
20
H22 Series Linear Solenoid Thrust and/or Pull Type
Doc
umen
t LN
SH
22/1
2
Rev
isio
n 003
Preferred types competitively priced and available on a quick
delivery.
H2286-R-F-24VDC 100%ED
H2206-F-24VDC 100%ED
H2246-F-24VDC 100%ED
Email: [email protected]: www.impulseautomation.co.uk
Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.
Impulse Automation LimitedUnited Kingdom
Company Registration 665193
2515
20
M3 32
8
Ø8 2
48,5 0,5
8153,5
M3
Ø2
2515
20
M3 32
815
M3
64,5 0,5
25,5 0,3
15+1
M3
8
Dimensions given with armature in fully home position–––––––>Direction of stroke
Dimensions given with armature in fully home position–––––––>Direction of stroke
H2206 pull type solenoid
H2246 thrust type solenoid
2515
20
M3 32
8
Ø8 2
74
8153,5
Ø2
15+1
M3
M3
25,5 0,3
Dimensions given with armature in fully home position–––––––>Direction of stroke
H2286-R combi type solenoid with return spring
H22 Series Linear Solenoid Thrust and/or Pull Type
Doc
umen
t LN
SH
22/2
2
Rev
isio
n 003
Email: [email protected]: www.impulseautomation.co.uk
Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions.The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.
Impulse Automation LimitedUnited Kingdom
Company Registration 665193