ha accepted en1317 compliant road restraint systems · organisation (refer to td19/06, sections 3.6...

62
HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS March 2011 CONTENTS: Sector Scheme Training Requirements New Products & Amendments Safety Barriers (SB) Temporary Safety Barriers (TSB) Parapets (P) Terminals (T) Lorry Mounted Crash Cushions (LMCCs) Transitions (TRANS) Miscellaneous (M) Crash Cushions (CC) Safety Barrier Gates (SBG) The HA Accepted EN1317 Compliant Road Restraint Systems List is periodically updated. To view or download the current version of this list contact: http://www.highways.gov.uk/business/8720.aspx

Upload: others

Post on 21-Jun-2020

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

HA ACCEPTED EN1317 COMPLIANTROAD RESTRAINT SYSTEMS

March 2011

CONTENTS:

Sector Scheme Training Requirements

New Products & Amendments

Safety Barriers (SB)

Temporary Safety Barriers (TSB)

Parapets (P)

Terminals (T)

Lorry Mounted Crash Cushions (LMCCs)

Transitions (TRANS)

Miscellaneous (M)

Crash Cushions (CC)

Safety Barrier Gates (SBG)

The HA Accepted EN1317 Compliant Road Restraint Systems List is periodically updated.To view or download the current version of this list contact:

http://www.highways.gov.uk/business/8720.aspx

Page 2: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

Sector Scheme Training Requirements, New Products Relisted Products & Amendments March 2011

Sector Scheme Training Requirements

Note from TD19/06:1.17 All VRS installed for use on the Trunk Road network, and on all roads in NorthernIreland, must be installed and maintained by qualified personnel in accordance with SectorSchemes 2B and 5B (see Appendix A of MCHW-1), where these schemes are applicable.VRS, such as bridge and pedestrian parapets or cast in-situ concrete barriers, that are notcovered by these Sector Schemes must be installed and maintained by suitably trainedand experienced personnel.

New Products – March 2011

•••• Safety Barriers (Permanent)- Highway Care; Quickchange Moveable Barrier (QMB) for permanent

applications (inc. CE mark)- Hill and Smith Ltd; Double sided FlexBeam at 4.0m post spacing- SafeRoad BLG; Birsta W2 at 4.0m post spacing- Tata Steel Construction Products; Vetex N2 W4 Single Sided Safety Barrier

at 3.5m post spacing•••• Safety Barriers (Permanent and Temporary)

- Delta Bloc; Delta Bloc 65S (K120)•••• Parapets

- SafeRoad BLG; SafeRoad SN1 Parapet•••• Terminals

- Marcegaglia P4 Terminal•••• Transition

- Hill and Smith; TranzFlex 100 N2 FlexBeam to single sided H1/H2FlexBeam Plus Transition

Note: For further details on these systems, please see relevant section within the HAAccepted EN1317 Compliant Road Restraint Systems List.

Amendments/Other Changes

• Listing of the Asset International VarioGuard systems 1 and 2 within Class L2• SafeRoad BLG’s Phoenix (N1 and N2), SN2 and BalmerGuard parapets now CE

marked• Change of company name for CORUS CEP (to Tata Steel Construction Products)• Change of company name for CORUS Tubes (to Tata Steel Tubes Europe)• Change of contact details for Delta Bloc International (now Delta Bloc UK Ltd.)• Change of promoter details for all Delta Bloc systems from Marshalls to Delta Bloc

UK Ltd.• Change of company name for Quixote Europe (to Trinity Highway Products

International)• Change of contact address and telephone number for Sistema Limited• Change of contact details for SafeRoad BLG

Return to Contents

Page 3: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE Marked

C The installation of safetybarriers with an ASI Class ofC must be with theagreement of the OverseeingOrganisation (refer toTD19/06, Sections 3.6 and3.7).

W1 C

W4 B

B

W4B

W5B

W4B

W5N2 A

W6

Please contact an appropriate Manufacturer/ Contractorfor details including information on construction.

W5

Please contact an appropriate Manufacturer/ Contractorfor details including information on construction.

Please contact any of the Promoters listed below fordetails including information on construction,connections and transitions.

Please contact any of the Promoters listed below fordetails including information on construction,connections and transitions.

SAFETY BARRIERS

The following Safety Barriers have been successfully tested to meet the requirements of BS EN 1317 -1 and -2 and are acceptable for use on the Highways AgencyTrunk Road Network for the Containment Performance Class and Working Width Class stated below.Please note: that all safety barriers must be installed by qualified personnel in accordance with sector scheme 2B or 21.The Safety Barriers shall comply with the manufacturers Specification, component descriptions and Installation procedures.Further information on Impact Severity Levels for the product and copies of documents and drawings can be obtained from the Promoter.

Working Width Class

The installation of safetybarriers with an ASI Class ofC must be with theagreement of the OverseeingOrganisation (refer toTD19/06, Sections 3.6 and3.7).

Name and Address of Promoter

Please contact any of the Promoters listed below fordetails including information on construction,connections and transitions.

Double Rail OpenBox Beam (DROBB)

With post centres at 2.4mthen the Working Width Class

Double Sided OpenBox Beam (DSOBB)

Higher VerticalConcrete Barrier(HVCB)

N2

Vertical ConcreteBarrier (VCB)

N2

Please contact any of the Promoters listed below fordetails including information on construction,connections and transitions.

With post centres at 3.2m theWorking Width Class is:

With post centres at 1.2m theWorking Width Class is:

With post centres at 2.4m theWorking Width Class is:

With post centres at 1.2m theWorking Width Class is:

Safety Barrier Type Containment Performance Class

H1

Single SidedTensionedCorrugated Beam(SSTCB)

Single Sided OpenBox Beam (SSOBB)

H4a

N2

Safety Barriers SB 1 March 2011

Page 4: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

Unknown

W6

Clipstone Services Limited Tata Steel Construction Products Tata Steel Tubes EuropeUnits J & K Llanwern Works PO Box 101Clipstone Holding Centre Newport Weldon RoadClipstone Village South Wales CorbyMansfield NP19 4QZ NorthantsNottinghamshire NN17 5UANG21 9AP Tel. 01633 290011 Tel. 01536 402121Tel. 01623 420188 email: [email protected] email:[email protected]

Hill and Smith Ltd. SafeRoad BLG Ltd.Springvale Avenue Dragonby ValeBilston Enterprise ParkWolverhampton Manaberg WayWV 0QL Scunthorpe

North LincolnshireTel. 01902 499400 DN15 8XFFax: 01902 499419 Tel. 01724 289119email: [email protected] email: [email protected] site: www.hill-smith.co.uk

Please contact any of the Promoters listed below fordetails including information on construction,connections and transitions.

Double SidedTensionedCorrugated Beam(DSTCB)

With post centres at 3.2m theWorking Width Class is:

The Promoters for the above Double Rail Open Box Beam (DROBB), Single Sided Open Box Beam (SSOBB), Double Sided Open Box Beam (DSOBB), Single Sided Tensioned Corrugated Beam(SSTCB) and Double Sided Tensioned Corrugated Beam (DSTCB) are listed below. Please contact these Promoters for all enquiries concerning these safety barrier systems and associatedconnections and transitions and detailed and general arrangement drawings.

N2

Safety Barriers SB 2 March 2011

Page 5: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

H2 W2 C Ardee Precast Concrete LimitedTown ParksArdeeCo. LouthIrelandTel. +353 41 6856372Fax. +353 41 6857216email: [email protected] Site: www.ardeeprecastconcrete.com

H2 W2 C Ardee Precast Concrete LimitedTown ParksArdeeCo. LouthIrelandTel. +353 41 6856372Fax. +353 41 6857216email: [email protected] Site: www.ardeeprecastconcrete.com

H2 W2 C Ardee Precast Concrete LimitedTown ParksArdeeCo. LouthIrelandTel. +353 41 6856372Fax. +353 41 6857216email: [email protected] Site: www.ardeeprecastconcrete.com

H2 W5 B Ardee Precast Concrete LimitedTown ParksArdeeCo. LouthIrelandTel. +353 41 6856372Fax. +353 41 6857216email: [email protected] Site: www.ardeeprecastconcrete.com

W6 B

W8 B

L2 W8 B WV14 0QL

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

System SpenglerSingle Sided PrecastConcrete Barrier,Type 81 (includingBridge Capinstallation)

The installation of safetybarriers with an ASI Class ofC must be with theagreement of the OverseeingOrganisation (refer toTD19/06, Sections 3.6 and3.7).

The installation of safetybarriers with an ASI Class ofC must be with theagreement of the OverseeingOrganisation (refer toTD19/06, Sections 3.6 and3.7).

Bilston

N2

System Spengler'URBAN' Single SidedPrecast ConcreteBarrier, (ModifiedSystem SpenglerType 85-2

Asset International (A Division of Hill and Smith)

Wolverhampton

Springvale AvenueH2

Varioguard DoubleSided Safety Barrier -SYSTEM No. 1

The installation of safetybarriers with an ASI Class ofC must be with theagreement of the OverseeingOrganisation (refer toTD19/06, Sections 3.6 and3.7).

System SpenglerDouble Sided PrecastConcrete Barrier('B35') (height 0.81 +0.04m)

System SpenglerPrecast ConcreteBarrier, TroughConstruction withFilling

Safety Barriers SB 3 March 2011

Page 6: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

W2 B

WV14 0QL

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

W5 B

WV14 0QL

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

W4 B Asset International (A Division of Hill and Smith)Springvale AvenueBilstonWolverhamptonWV14 0QL

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

W2 B Asset International (A Division of Hill and Smith)Springvale AvenueBilstonWolverhamptonWV14 0QLTel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

Bilston

Asset International (A Division of Hill and Smith)

Wolverhampton

Springvale Avenue

Varioguard DoubleSided Steel SafetyBarrier -SYSTEM No. 3

N2

Varioguard SingleSided Safety Barrier -SYSTEM No. 4

H2

H1

N2

SOLOGUARDEmergency andMaintenanceCrossing PointSystem

Springvale AvenueAsset International (A Division of Hill and Smith)

BilstonWolverhampton

Asset InternationalSteel Step Barrier

Safety Barriers SB 4 March 2011

Page 7: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

W1 B

WV14 0QL

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

A

W6

WV14 0QL

A

W4

A WV14 OQL

W5

H1 ASpringvale Avenue

W7 BilstonWolverhamptonWV 0QLTel. 01902 499400Fax: 01902 499419email: [email protected] site: www.hill-smith.co.uk

Brifen (A Division of Hill and Smith)With post centres at 3.2m theWorking Width Class is:

With post centres at 3.2mthen the Working Width Class

Tel. 01902 499400

Springvale Avenue

Springvale Avenue

Asset International (A Division of Hill and Smith)

Bilston

email: [email protected]

Bilston

email: [email protected]

With post centres at 1.2m theWorking Width Class is:

Tel. 01902 499400

Brifen (A Division of Hill and Smith)

BilstonSpringvale Avenue

WolverhamptonWith post centres at 3.2m the

Working Width Class is:

Brifen (A Division of Hill and Smith)

Fax. 01902 499419

Fax. 01902 499419

Wolverhampton

Wolverhampton

Asset InternationalHalf Steel StepBarrier

H2

Brifen 4 wire ropesafety fence

N2

Brifen 4 Rope WireRope Safety Fence

Brifen 3 Rope WireRope Safety Fence

N2

Safety Barriers SB 5 March 2011

Page 8: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

BritpaveAtrium CourtThe RingBracknellBerkshireRG12 1BW

Tel. 01344 393300W1 B email: [email protected] B Web site: www.britpave.org.uk

W3 BBritpaveAtrium CourtThe RingBracknellBerkshireRG12 1BW

W1 B Tel. 01344 393300W2 B email: [email protected]

Web site: www.britpave.org.uk

W3 BN2 or H1 or H2

Note - where there is nodifference in level betweenadjoining carriageways andwhere the actual width of thebarrier is less than 0.6m widethe Working Width Class is:

N2H1 or H2

Variable EmbeddedConcrete Step Barrier(0.9m High minimum)Slip formed ConcreteSystem (Minimum60mm embedment)

N2H1 or H2

Embedded ConcreteStep Barrier (0.9mHigh fixed profile) Slipformed ConcreteSystem (Minimum60mm embedment)

N2 or H1 or H2

Note - where there is adifference in level betweenadjoining carriageways of notmore than 300mm and wherethe actual width of the barrieris less than 0.6m wide theWorking Width Class is:

Note - where there is adifference in level betweenadjoining carriageways of notmore than 300mm and wherethe actual width of the barrieris greater than 0.6m but lessthan 1.0m wide the WorkingWidth Class is:

Note - where there is nodifference in level betweenadjoining carriageways andwhere the barrier width isgreater than 0.6m but lessthan 1.0m wide the WorkingWidth Class is:

Safety Barriers SB 6 March 2011

Page 9: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

BritpaveAtrium CourtThe RingBracknellBerkshireRG12 1BW

Tel. 01344 393300W1 B email: [email protected] B Web site: www.britpave.org.uk

W3 BBritpaveAtrium CourtThe RingBracknellBerkshireRG12 1BW

W1 B Tel. 01344 393300W2 B email: [email protected]

Web site: www.britpave.org.uk

W3 BSteel Step Barrier W2 B Britpave(0.9m High) Atrium Court

The RingBracknellBerkshireRG12 1BW

Tel. 01344 393300email: [email protected] site: www.britpave.org.uk

Note - where there is adifference in level betweenadjoining carriageways of notmore than 300mm and wherethe actual width of the barrieris less than 0.6m wide theWorking Width Class is:

Note - where there is nodifference in level betweenadjoining carriageways andwhere the barrier width isgreater than 0.6m but lessthan 1.0m wide the WorkingWidth Class is:

N2

Surface MountedConcrete Step Barrier(0.9m High fixedprofile) Slip formedConcrete System

Variable SurfaceMounted ConcreteStep Barrier (0.9mHigh minimum) Slipformed ConcreteSystem

N2

H1 or H2

N2 or H1 or H2

Note - where there is adifference in level betweenadjoining carriageways of notmore than 300mm and wherethe barrier width is greaterthan 0.6m but less than 1.0mwide the Working Width Classis:

Note - where there is nodifference in level betweenadjoining carriageways andwhere the actual width of thebarrier is less than 0.6m widethe Working Width Class is:

H1 or H2

N2 or H1 or H2H2

Safety Barriers SB 7 March 2011

Page 10: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

W4 B Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

W6 B Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

N2 W4 B Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

W4 A Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

W6 B Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

Delta Bloc DB65S/6m(K120S)

Delta Bloc DB80/4m(K180)

N1

Note: Only permitted for use onroads where road works are beingundertaken and a speed limit ofless than 50 mph is operative.

Delta Bloc DB80/4m(K180)

H1

Delta Bloc DB65S/6m(K120S)

H1

N2

Delta Bloc DB80/4m(K120S)

Safety Barriers SB 8 March 2011

Page 11: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

N2 W3 B Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

H2 W1 B Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

H2 W4 B Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

Delta Bloc DB80E/6m H2 W1 C Delta Bloc United Kingdom Ltd(K150S) 1200 Century Way

Thorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

H2 W6 C Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

The installation of safetybarriers with an ASI Class ofC must be with theagreement of the OverseeingOrganisation (refer toTD19/06, Sections 3.6 and3.7).

The installation of safetybarriers with an ASI Class ofC must be with theagreement of the OverseeingOrganisation (refer toTD19/06, Sections 3.6 and3.7).

Delta Bloc DB80AS-R/6m (K180)

Delta Bloc DB80AS-E/6m (K180S)

Delta Bloc DB90Step/6m (K220)

Delta Bloc DB80/6m(K150S)

Safety Barriers SB 9 March 2011

Page 12: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

H2 W5 A Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

Delta Bloc DB100/6m N2 W6 B Delta Bloc United Kingdom Ltd(K250) 1200 Century Way

Thorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

Delta Bloc DB100/6m H4a W6 B Delta Bloc United Kingdom Ltd(K250) 1200 Century Way

Thorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

Delta Bloc DB100/6m H1 W6 B Delta Bloc United Kingdom Ltd(K250) 1200 Century Way

Thorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

A Francesco TessariIMEVA82 100 BeneventoLocalita Ponte ValentinoArea Industriale ASIZona 75ItalyTel. 0039 08 24481211email: [email protected]

N2

Delta BlocDB100S/6m (K220)

IMEVA N2 VergeSafety Fence

With post centres at 3.375mthe Working Width Class is:

W5

Safety Barriers SB 10 March 2011

Page 13: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

W4 B Haitsma BetonPinksterbloemstraat 2Postbus 79288 ZG KootstertilleThe Netherlands

Tel. 0512-335678Fax. 0512-335666email: [email protected]

W5 B Haitsma BetonPinksterbloemstraat 2Postbus 79288 ZG KootstertilleThe Netherlands

Tel. 0512-335678Fax. 0512-335666email: [email protected]

N2 W2 B

MaidstoneKentME14 3HT

Web site: www.highwaycare.co.ukN2 W2 B

MaidstoneKentME14 3HT

Web site: www.highwaycare.co.uk

Tel. 01622 734215

Highway Care Ltd.

Tel. 01622 734215

Fax. 01622 735106

Fax. 01622 735106

The Highlands

Detling Hill

email: [email protected]

Detling Hill

The Highlands

H2

Detling

email: [email protected]

Detling

HAITSMA H2Freestanding PrecastConcrete Step Barrier

Highway CareBarrierGuard 800 -12m centres

Highway Care Ltd.

HAITSMA Beton H2Freestanding PrecastConcrete Step Barrier- (Version 2)

H2

Highway CareBarrierGuard 800,Minimum DeflectionSystem (MDS)

Safety Barriers SB 11 March 2011

Page 14: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

W1 B

MaidstoneKentME14 3HT

Web site: www.highwaycare.co.ukW4 B

(QMB)W6 B YES

MaidstoneKentME14 3HT

Web site: www.highwaycare.co.ukH2 W5 A Hill and Smith Ltd.

Springvale AvenueBilstonWolverhamptonWV 0QL

Tel. 01902 499400Fax: 01902 499419email: [email protected] site: www.hill-smith.co.uk

Fax. 01622 735106email: [email protected]

Highway Care Ltd.

Tel. 01622 734215

email: [email protected]. 01622 735106

The HighlandsDetling Hill

Highway Care Ltd.

Detling

Highway Care HalfSteel Step Barrier

H2

QuickchangeMoveable Barrier

Bri-Flex Double sidedvehicle restraintsystem

N2The HighlandsDetling Hill

H2 Detling

Tel. 01622 734215

PermanentApplication

Safety Barriers SB 12 March 2011

Page 15: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

A Hill and Smith Ltd.Springvale Avenue

W2 BilstonWolverhampton

A WV 0QL

W2 Tel. 01902 499400Fax: 01902 499419

A email: [email protected] site: www.hill-smith.co.uk

W4

A

W4

A

W3

A

W4

A

W4

With post centres at 4.0m theWorking Width Class is:

N2

With post centres at 4.0m theWorking Width Class is:

With post centres at 2.0m theWorking Width Class is:

With post centres at 3.6m theWorking Width Class is:

Flex-BeamUntensionedCorrugated BeamDouble Sided SteelSafety Barrier

With post centres at 4.8m theWorking Width Class is:

With post centres at 1.6m theWorking Width Class is:

With post centres at 3.2m theWorking Width Class is:

Safety Barriers SB 13 March 2011

Page 16: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

A Hill and Smith Ltd.Springvale Avenue

W2 BilstonWolverhampton

A WV 0QL

W3 Tel. 01902 499400Fax: 01902 499419

A email: [email protected] site: www.hill-smith.co.uk

W4

A

W4

A

W5

A

W5N2 C Hill and Smith Ltd.

Springvale AvenueW1 Bilston

WolverhamptonB WV 0QL

W2 Tel. 01902 499400Fax: 01902 499419

B email: [email protected] site: www.hill-smith.co.uk

W3

B

W4

B

W5

With post centres at 1.2m theWorking Width Class is:

With post centres at 1.6m the

With post centres at 5.0m theWorking Width Class is:

The installation of safetybarriers with an ASI Class ofC must be with theagreement of the OverseeingOrganisation (refer toTD19/06, Sections 3.6 and3.7).

Working Width Class is:

With post centres at 3.2m theWorking Width Class is:

H2

N2Flex-BeamUntensionedCorrugated BeamSingle Sided SteelSafety Barrier

Flex-Beam PlusUntensionedCorrugated BeamSingle Sided SteelSafety Barrier

With post centres at 2.4m theWorking Width Class is:

With post centres at 2.0m the

With post centres at 4.0m theWorking Width Class is:

H1

With post centres at 0.8m theWorking Width Class is:

Working Width Class is:

With post centres at 2.0m theWorking Width Class is:

With post centres at 2.8m theWorking Width Class is:

With post centres at 2.0m theWorking Width Class is:

Safety Barriers SB 14 March 2011

Page 17: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

ZoneGuard N2 W6 B Hill and Smith Ltd.Springvale AvenueBilstonWolverhamptonWV 0QLTel. 01902 499400Fax: 01902 499419email: [email protected] site: www.hill-smith.co.uk

N2 A Holgate Infrastructure & Motorway Services137 Gelderd Road

W4 LeedsWest YorkshireLS12 6BZTel. 0133 244 4458email: [email protected]

W5 website: www.holgate.ieH1 A Holgate Infrastructure & Motorway Services

137 Gelderd Road

W5 LeedsWest YorkshireLS12 6BZTel. 0133 244 4458email: [email protected]: www.holgate.ie

H2 W4 A Holgate Infrastruture and Motorway Services137 Gelderd RoadLeeds

West Yorkshire

LS12 6BZUnited KingdomTel.: 0113 244 4458Email [email protected] www.holgate.ieFracasso Website: www.fracasso.it

H2 W5 A Holgate Infrastruture and Motorway Services137 Gelderd RoadLeeds

West Yorkshire

LS12 6BZUnited KingdomTel.: 0113 244 4458Email [email protected] www.holgate.ieFracasso Website: www.fracasso.it

With post centres at 3.0m theWorking Width Class is:

With post centres at 2.5m theWorking Width Class is:

With post centres at 2.5m theWorking Width Class is:

Fracasso Type3n30055 Single SidedSafety Barrier

Fracasso Type3n32312 Single SidedSafety Barrier

Safence 3-rope safetyfence system

Safence 4.R.I 4-ropesafety fence system

Safety Barriers SB 15 March 2011

Page 18: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

H2 W4 B Holgate Infrastruture and Motorway Services137 Gelderd RoadLeedsWest YorkshireLS12 6BZUnited KingdomTel.: 0113 244 4458Email [email protected] www.holgate.ieFracasso Website: www.fracasso.it

H2 W6 A Holgate Infrastruture and Motorway Services137 Gelderd RoadLeeds

West Yorkshire

LS12 6BZUnited KingdomTel.: 0113 244 4458Email [email protected] www.holgate.ieFracasso Website: www.fracasso.it

H2 W7 A Holgate Infrastruture and Motorway Services137 Gelderd RoadLeeds

West Yorkshire

LS12 6BZUnited KingdomTel.: 0113 244 4458Email [email protected] www.holgate.ieFracasso Website: www.fracasso.it

H2 W8 A Holgate Infrastruture and Motorway Services137 Gelderd RoadLeeds

West Yorkshire

LS12 6BZUnited KingdomTel.: 0113 244 4458Email [email protected] www.holgate.ieFracasso Website: www.fracasso.it

Fracasso Type3ni24872 SingleSided Safety Barrier

Fracasso Type3ni24341 SingleSided Safety Barrier

Fracasso Type3n30401 Single SidedSafety Barrier

Fracasso Type3n31382 Single SidedSafety Barrier

Safety Barriers SB 16 March 2011

Page 19: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

H3 W5 B Holgate Infrastruture and Motorway Services137 Gelderd RoadLeeds

W6 B West Yorkshire(Double LS12 6BZ

United KingdomTel.: 0113 244 4458Email [email protected] www.holgate.ieFracasso Website: www.fracasso.it

H3 W5 A Holgate Infrastruture and Motorway Services137 Gelderd RoadLeedsWest YorkshireLS12 6BZUnited KingdomTel.: 0113 244 4458Email [email protected] www.holgate.ieFracasso Website: www.fracasso.it

H3 W5 B Holgate Infrastruture and Motorway Services137 Gelderd RoadLeedsWest YorkshireLS12 6BZUnited KingdomTel.: 0113 244 4458Email [email protected] www.holgate.ieFracasso Website: www.fracasso.it

N2 W2 A Marcegaglia buildtech S.r.lNew RoadNethertonDudleyWest MidlandsDY2 8TA

Tel. 01384 242 812Fax. 01384 242 813email: [email protected]

(SingleSided)

Fracasso Type3n28428Single/Double SidedSafety Barrier

Fracasso Type3n31679 Single SidedSafety Barrier

Marcegaglia N2W2safety fence system

Fracasso Type3n31862 Single SidedSafety Barrier

Safety Barriers SB 17 March 2011

Page 20: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

H1 W3 A Marcegaglia buildtech S.r.lNew RoadNethertonDudleyWest MidlandsDY2 8TA

Tel. 01384 242 812Fax. 01384 242 813email: [email protected]

B SafeRoad BLG Ltd.Dragonby Vale

W1 Enterprise ParkManaberg WayScunthorpeNorth LincolnshireDN15 8XFTel. 01724 289119email: [email protected]

H2 B SafeRoad BLG Ltd.Dragonby Vale

W2 Enterprise ParkManaberg WayScunthorpeNorth LincolnshireDN15 8XFTel. 01724 289119email: [email protected]

SafeGuard Barrier N2 A SafeRoad BLG Ltd.Dragonby Vale

W3 Enterprise ParkManaberg WayScunthorpeNorth LincolnshireDN15 8XFTel. 01724 289119email: [email protected]

N2 W4 A SafeRoad BLG Ltd.Dragonby ValeEnterprise Park YESManaberg WayScunthorpeNorth LincolnshireDN15 8XFTel. 01724 289119email: [email protected]

With post centres at 2.0m theWorking Width Class is:

Balmerguard H2Safety Fence

Birsta W2 Guardrail(4.0m post spacing)

Balmerguard H2Safety Fence (DoubleSided)

With post centres at 2.0m theWorking Width Class is:

SteelFlex SafetyFence System

N2 or H2

With post centres at 2.0m theWorking Width Class is:

Whilst the name of thesystem is 'Birsta W2', it is aW4 system

Safety Barriers SB 18 March 2011

Page 21: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

N2 W4 A SafeRoad BLG Ltd.Dragonby ValeEnterprise ParkManaberg WayScunthorpeNorth LincolnshireDN15 8XFTel. 01724 289119email: [email protected]

A S.C.T. srlVia del Brolo, 32

W6 25136 BRESCIAItaly

Tel. 0039 030209 2541email: [email protected] site: www.sctitalia.com

W5 B Sistema Construction (UK) Ltd.Unit CShepherds Grove Industrial Estate (East)StantonBury St EdmundsSuffolkIP31 2BFTel. 01359 251 248Fax. 01359 251 201Mobile. 07740 122 982email: [email protected] email: [email protected]

B Sistema Construction (UK) Ltd.Unit CShepherds Grove Industrial Estate (East)StantonBury St EdmundsSuffolkIP31 2BFTel. 01359 251 248Fax. 01359 251 201Mobile. 07740 122 982email: [email protected] email: [email protected]

With post centres at 4.0m theWorking Width Class is:

W5N2 and H3

Sistema SteelgardBarrier

N2

Sistema SteelgardCentral ReserveBarrier

H4a

SCT 'DUCOS' SingleSided CompositeTimber and SteelClass N2 SafetyBarrier

ESP Profile A, 2mpost spacing

Safety Barriers SB 19 March 2011

Page 22: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

B Sistema Construction (UK) Ltd.Unit CShepherds Grove Industrial Estate (East)StantonBury St EdmundsSuffolkIP31 2BFTel. 01359 251 248Fax. 01359 251 201Mobile. 07740 122 982email: [email protected] email: [email protected]

W6 A Sistema Construction (UK) Ltd.Unit CShepherds Grove Industrial Estate (East)StantonBury St EdmundsSuffolkIP31 2BFTel. 01359 251 248Fax. 01359 251 201Mobile. 07740 122 982email: [email protected] email: [email protected]

W7 B Sistema Construction (UK) Ltd.Unit CShepherds Grove Industrial Estate (East)StantonBury St EdmundsSuffolkIP31 2BFTel. 01359 251 248Fax. 01359 251 201Mobile. 07740 122 982email: [email protected] email: [email protected]

W2 A Sistema Construction (UK) Ltd.Unit CShepherds Grove Industrial Estate (East)StantonBury St EdmundsSuffolkIP31 2BFTel. 01359 251 248Fax. 01359 251 201Mobile. 07740 122 982email: [email protected]

N2

W5

H2

H1

N2 and H2

Fracasso TypeB21300 Double WaveSingle Sided SafetyBarrier

Fracasso Type3n13506 Single SidedSafety Barrier

N2W2 Safety FenceSystem

Sistema MDS H2Safety Barrier (With Environmental Barrier)

Safety Barriers SB 20 March 2011

Page 23: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

Direct email: [email protected]

Safety Barriers SB 21 March 2011

Page 24: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

W6 A Snoline spaVia F Baracca 19/2320056 Trezzo sull' Adda (M1)Italy

Tel. +39 02909961Fax +39 0290996200e-mail: [email protected]: Ms Roberta Gritti

A Tata Steel Construction ProductsLlanwern Works

W4 NewportSouth Wales

A NP19 4QZ

W5 Tel. 01633 290011email: [email protected]

A Tata Steel Construction ProductsLlanwern Works

W3 NewportSouth Wales

A NP19 4QZ

W4 Tel. 01633 290011email: [email protected]

B Tata Steel Construction ProductsLlanwern Works

W4 NewportSouth WalesNP19 4QZ

Tel. 01633 290011email: [email protected]

N2 With post centres at 1.6m theWorking Width Class is:

N2 and H2S-A-B Class H2 Gate(For emergency andmaintenance crossover points)

H2

N2Tata Steel CCB SteelSafety Barrier

Tata Steel Vetex H2Single Sided Barrier

Tata Steel CCBDouble-Sided SteelSafety Barrier

With post centres at 1.6m theWorking Width Class is:

With post centres at 3.2m theWorking Width Class is:

With post centres at 3.2m theWorking Width Class is:

With post centres at 2.0m theWorking Width Class is:

Safety Barriers SB 22 March 2011

Page 25: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

B Tata Steel Construction ProductsLlanwern Works

W2 NewportSouth Wales

B NP19 4QZ

W2 Tel. 01633 290011email: [email protected]

A

W2

A

W3

A

W3

A

W4

A

W4

A

W5

A

W5A Tata Steel Construction Products

Llanwern WorksW3 Newport

South WalesNP19 4QZ

W4 Tel. 01633 290011email: [email protected]

With post centres at 2.0m theWorking Width Class is:

With post centres at 4.0m theWorking Width Class is:

With post centres at 3.2m theWorking Width Class is:

With post centres at 2.5m theWorking Width Class is:

With post centres at 5.0m theWorking Width Class is:

N2

With post centres at 5.0m theWorking Width Class is:

Tata Steel VetexDouble Sided N2Steel Safety Barrier

N2 With post centres at 4.0m theWorking Width Class is:

With post centres at 2.5m theWorking Width Class is:

With post centres at 2.0m theWorking Width Class is:

With post centres at 1.6m theWorking Width Class is:

Tata Steel Vetex N2Single Sided SafetyBarrier

With post centres at 0.8m theWorking Width Class is:

Safety Barriers SB 23 March 2011

Page 26: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedWorking Width Class Name and Address of PromoterSafety Barrier Type Containment Performance Class

B Tata Steel Tubes EuropePO Box 101

W1 Weldon RoadCorby

B NorthantsNN17 5UA

W3 Tel. 01536 402121email:[email protected]

W2 C Technische Sichereits-Systeme (TSS) GmbHAlfred Schutte-Allee 10D-50679 CologneGermany

Tel. +49 221 980601Fax. 49 221 9806490email: [email protected]

W6 A Trinity Highway Products InternationalCrown House

W8 A Crown StreetIpswich YESSuffolkIP1 3HSTel. 01473 22 11 05Fax: 01473 22 11 06email: [email protected] site: www.energyabsorption.com

A Tubosider UK Ltd10 Sutton Fold Industrial Estate

W5 Off Lancots LaneSt. HelensMerseysideWA9 3EX

Tel. 01744 452900Fax. 01744 452949email: [email protected]

A Tubosider UK Ltd10 Sutton Fold Industrial Estate

W4 Off Lancots LaneSt. Helens

A MerseysideWA9 3EX

W7 Tel. 01744 452900Fax. 01744 452949email: [email protected]

END OF SAFETY BARRIER SECTION - RETURN TO CONTENTS

With post centres at 1.5m theWorking Width Class is:

The installation of safetybarriers with an ASI Class ofC must be with theagreement of the OverseeingOrganisation (refer toTD19/06, Sections 3.6 and3.7).

With post centres at 4.0m theWorking Width Class is:

With post centres at 1.5m theWorking Width Class is:

H2

N2

H2

Protect 365 N2 SafetyFence

N2

With post centres at 4.0m theWorking Width Class is:

Vulcan Safety Barrier

H1

Tubosider 3NTU-brl.16 Class N2Hardshoulder SafetyBarrier

Tubosider 2NTU-brl.23 Class H1/H2Hardshoulder SafetyBarrier

TSS Softbaer H2FreestandingConcrete Barrier

H2

With post centres at 2.0m theWorking Width Class is:

N2

Safety Barriers SB 24 March 2011

Page 27: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CommentH1 W7 B Ardee Precast Concrete Limited

Town ParksN1 W3 A Ardee

Co. LouthIrelandTel. +353 41 6856372Fax. +353 41 6857216email: [email protected] Site: www.ardeeprecastconcrete.comAsset International (A Division of Hill and Smith)

Note: N1 system only permitted foruse on roads where a speed limitof less than 50 mph is operative.

System SpenglerTransportable DoubleSided PrecastConcrete Barrier(height 0.81m)

For a tested length of 60mb t d h d

TEMPORARY SAFETY BARRIERS

The following Temporary Safety Barriers have been successfully tested to meet the requirements of BS EN 1317 -1 and -2 and have been accepted foruse on the Highways Agency Trunk Road Network for the Containment Performance Class and Working Width Class stated below.Please note: that all safety barriers must be installed by qualified personnel in accordance with sector scheme 2B.The Temporary Safety Barriers shall comply with the manufacturers Specification, component descriptions and Installation procedures.Further information on Impact Severity Levels for the product and copies of documents and drawings can be obtained from the Promoter.

Safety Barrier Type Containment Performance Class Working Width Class Name and Address of Promoter

Varioguard DoubleSid d S f t B i S i l A

WV14 0QLW6 B Tel. 01902 499402

Fax. 01902 402104W8 B email: [email protected]

Web Site: www.asset-vrs.co.ukL2 W8 B

Wolverhampton

N2

between end anchors, andanchored in accordance with theEN1317 compliant test, theworking width class shall be:

Sided Safety Barrier -SYSTEM No. 1

Springvale AvenueBilston

H2

Note: For a different installation lengthplease contact the Promoter forinformation concerning the WorkingWidth of the system.

Temporary Safety Barriers TB 24 March 2011

Page 28: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CommentSafety Barrier Type Containment Performance Class Working Width Class Name and Address of PromoterAsset International (A Division of Hill and Smith)Springvale AvenueBilston

WolverhamptonWV14 0QL

W6 B

W8 B Tel. 01902 499402Fax. 01902 402104

L2 W8 B email: [email protected]

W5 B Asset International (A Division of Hill and Smith)

WV14 0QL

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

For a tested length of 68mbetween end anchors, andanchored in accordance with theEN1317 compliant test, theworking width class shall be:

H2Springvale Avenue

SOLOGUARDEmergency andMaintenanceCrossing PointSystem

BilstonWolverhampton

H2

Note: For a different installation lengthplease contact the Promoter forinformation concerning the WorkingWidth of the system.

Varioguard 'QuickJoint' Steel SafetyBarrier -SYSTEM No. 2

N2

eb S e asse s co uAsset International (A Division of Hill and Smith)Springvale AvenueBilstonWolverhamptonWV14 0QL

W5 B

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

For a tested length of 68mbetween end anchors, andanchored in accordance with theEN1317 compliant test, theworking width class shall be:

Note: For a differentinstallation length pleasecontact the Promoter forinformation concerning theWorking Width of the system.

Varioguard 'QuickJoint' Double SidedSteel Safety Barrier -SYSTEM No. 5

N2

Temporary Safety Barriers TB 25 March 2011

Page 29: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CommentSafety Barrier Type Containment Performance Class Working Width Class Name and Address of PromoterAsset International (A Division of Hill and Smith)Springvale AvenueBilstonWolverhamptonWV14 0QL

W4 B

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

N2 W6 B Asset International (A Division of Hill and Smith)Springvale AvenueBilstonWolverhamptonWV14 0QL

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

N2 W6 B Asset International (A Division of Hill and Smith)Springvale Avenue

For a tested length of 88mbetween end anchors, andanchored in accordance with theEN1317 compliant test, theworking width class shall be:

Varioguard DoubleSided Steel SafetyBarrier - SYSTEMNo. 3

Varioguard QMSafety Barrier System- SYSTEM No. 6 - premove

Varioguard QMSafety Barrier System

N2

Note: For a differentinstallation length pleasecontact the Promoter forinformation concerning theWorking Width of the system.

BilstonWolverhamptonWV14 0QL

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

W4 B Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

N2Delta Bloc DB65S/6m(K120S)

- SYSTEM No. 6 -moved

Temporary Safety Barriers TB 26 March 2011

Page 30: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CommentSafety Barrier Type Containment Performance Class Working Width Class Name and Address of PromoterW6 B Delta Bloc United Kingdom Ltd

1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

N2 W4 B Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

W4 A Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06

Delta Bloc DB80/4m(K120S)

Delta Bloc DB80/4m(K180)

N1

Note: Only permitted for use onroads where road works are beingundertaken and a speed limit ofless than 50 mph is operative.

Delta Bloc DB65S/6m(K120S)

H1

email: [email protected] site: www.deltabloc.co.uk

W6 B Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

N2 W3 B Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

H1Delta Bloc DB80/4m(K180)

Delta Bloc DB80/6m(K150S)

Temporary Safety Barriers TB 27 March 2011

Page 31: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CommentSafety Barrier Type Containment Performance Class Working Width Class Name and Address of PromoterH2 W1 B Delta Bloc United Kingdom Ltd

1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

H2 W4 B Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected]

Web site: www.deltabloc.co.ukDelta Bloc DB80E/6m H2 W1 C Delta Bloc United Kingdom Ltd(K150S) 1200 Century Way

Thorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06

The installation of safetybarriers with an ASI Classof C must be with theagreement of theOverseeing Organisation(refer to TD19/06,Sections 3.6 and 3.7).

Delta Bloc DB80AS-E/6m (K180S)

email: [email protected] site: www.deltabloc.co.uk

H2 W6 C Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

H2 W5 A Delta Bloc United Kingdom Ltd1200 Century WayLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

)

Delta Bloc DB90Step/6m (K220)

The installation of safetybarriers with an ASI Classof C must be with theagreement of theOverseeing Organisation(refer to TD19/06,Sections 3.6 and 3.7).

Delta BlocDB100S/6m (K220)

Temporary Safety Barriers TB 28 March 2011

Page 32: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CommentSafety Barrier Type Containment Performance Class Working Width Class Name and Address of PromoterDelta Bloc DB100/6m N2 W6 B Delta Bloc United Kingdom Ltd(K250) 1200 Century Way

Thorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

Delta Bloc DB100/6m H4a W6 B Delta Bloc United Kingdom Ltd(K250) 1200 Century Way

Thorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

Delta Bloc DB100/6m H1 W6 B Delta Bloc United Kingdom Ltd(K250) 1200 Century Way

Thorpe Park Business ParkColtonLeeds LS15 8ZATel. 08453 04 07 05Fax. 08453 04 07 06email: [email protected] site: www.deltabloc.co.uk

W4 A Eurovia Beton12, Avenue du Juillet91412 Dourdan CedexFranceTel. (33) 01 60815200/(33) 01 64593184email: [email protected] site: www.eurovia.com

N1

Note: Only permitted for use onroads where road works are beingundertaken and a speed limit ofless than 50 mph is operative.

Eurovia Beton 2mTransportableConcrete Barrier

Temporary Safety Barriers TB 29 March 2011

Page 33: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CommentSafety Barrier Type Containment Performance Class Working Width Class Name and Address of PromoterW3 B Hardstaff Barriers

Hardstaff Traffic Barrier Services LtdHillsideGotham RoadKingston-on-SoarNottingham

W3 C NG11 0DF

Tel. 0115 983 2300Fax. 0115 983 0087email: [email protected] site: www.hardstaff-barriers.co.uk

W6 C Hardstaff BarriersHardstaff Traffic Barrier Services LtdHillsideGotham RoadKingston-on-SoarNottinghamNG11 0DF

W2 CTel. 0115 983 2300Fax. 0115 983 0087email: [email protected] site: www.hardstaff-barriers.co.uk

The installation oftemporary safety barrierswith an ASI Class of Cmust be with theagreement of theOverseeing Organisation(refer to TD19/06,Sections 8.5 and 8.6).

Highway Care Ltd.Highway Care

H4aMaxiblocFreestandingTemporary HigherVertical ConcreteBarrier

For a tested length of 72m

Note: Only permitted for use onroads where road works are beingundertaken and a speed limit ofless than 50 mph is operative.

N2

Multibloc 80Temporary VerticalConcrete Barrier

N1

Maxibloc RecessedTemporary HigherVertical ConcreteBarrier

The installation oftemporary safety barrierswith an ASI Class of Cmust be with theagreement of theOverseeing Organisation(refer to TD19/06,Sections 8.5 and 8.6).

H4a

Multibloc 110FreestandingTemporary VerticalConcrete Barrier

MaidstoneW5 A Kent

ME14 3HT

Web site: www.highwaycare.co.uk

W8 A

Fax. 01622 735106

Note: For a differentinstallation length pleasecontact the Promoter forinformation concerning theWorking Width of the system.

Detling Hill

email: [email protected]

Tel. 01622 734215

Detling

The HighlandsBarrierGuard 800 between end anchors, andanchored in accordance with theEN1317 compliant test, theworking width class shall be:

N2

H2

Temporary Safety Barriers TB 30 March 2011

Page 34: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CommentSafety Barrier Type Containment Performance Class Working Width Class Name and Address of PromoterN2 W2 B

MaidstoneKentME14 3HT

Web site: www.highwaycare.co.ukN2 W2 B

MaidstoneKentME14 3HT

Web site: www.highwaycare.co.ukW4 B

Highway CareBarrierGuard 800 -12m centres

Highway Care Ltd.The HighlandsDetling HillDetling

Highway Care Ltd.

Quickchange N2

DetlingDetling Hill

Fax. 01622 735106

Tel. 01622 734215Fax. 01622 735106

Highway CareBarrierGuard 800,Minimum DeflectionSystem (MDS)

email: [email protected]

Tel. 01622 734215

Highway Care Ltd.

email: [email protected]

The Highlands

(QMB)W6 B

MaidstoneKentME14 3HT

Web site: www.highwaycare.co.ukZoneGuard N2 W6 B Hill and Smith Ltd.

Springvale AvenueBilstonWolverhamptonWV 0QLTel. 01902 499400Fax: 01902 499419email: [email protected] site: www.hill-smith.co.uk

email: [email protected]

gMoveable Barrier

Detling HillDetling

The Highlandsg y

Tel. 01622 734215Fax. 01622 735106

H2

Temporary Safety Barriers TB 31 March 2011

Page 35: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CommentSafety Barrier Type Containment Performance Class Working Width Class Name and Address of Promoter

W3 C NMS Civil Engineering LimitedPark Industrial EstateLiverpool RoadAshton-in MakerfieldWiganGreater ManchesterWN4 0YUTel. 01942 722694email: [email protected]

N1 W7 A Oaklands Plastics LtdStation RoadColeshillBirminghamB46 1HTTel. 01675 466321email: [email protected]

REBLOC RB80_8 N2 W3 B REBLOC GmbHWeinerstrasse 662A-3571 Gars am KampGERMANYTel. +43(2985)30922-2902Fax. +43(2985)30922-2901email: [email protected] site: www.rebloc.com

W8 A Rhino Barrier Systems Ltd.

The installation oftemporary safety barrierswith an ASI Class of Cmust be with theagreement of theOverseeing Organisation(refer to TD19/06,Sections 8.5 and 8.6).

N1Rhino Polyethylene

NMS CivilEngineering N2TCBFreestanding PrecastConcrete Barrier

N2

Note: Only permitted for use onroads where road works are beingundertaken and a speed limit ofless than 50 mph is operative.

RB22 Water FilledBarrier

Equinox 1Audby LaneWetherbyWest YorkshireLS22 7RD

Tel. 01937 583333Fax. 01937 58322email: [email protected] Site: www.rhinobarriers.com

Note: Only permitted for use onroads where road works are beingundertaken and a speed limit ofless than 50 mph is operative.

Water Filled Barrier

Temporary Safety Barriers TB 32 March 2011

Page 36: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CommentSafety Barrier Type Containment Performance Class Working Width Class Name and Address of PromoterSafeRoad BLGDragonby ValeEnterprise ParkManaberg WayScunthorpe

W8 B North LincolnshireDN15 8XFTel. 01724 289119email: [email protected]

SafeRoad BLG Ltd.Dragonby ValeEnterprise ParkManaberg WayScunthorpe

W6 A North LincolnshireW8 B DN15 8XF

Tel. 01724 289119email: [email protected]

For a tested length of 64mbetween end anchors, andanchored in accordance with theEN1317 compliant test, theworking width class shall be:

Note: For a differentinstallation length pleasecontact the Promoter forinformation concerning theWorking Width of the system.

H2

FreestandingVarioguard withQuick Joints H2Double Sided SteelSafety Barrier

N2

Varioguard 'QuickJoint' H2 DoubleSided Steel SafetyBarrier

H2

For a tested length of 68mbetween end anchors, andanchored in accordance with theEN1317 compliant test, theworking width class shall be:

Note: For a differentinstallation length pleasecontact the Promoter forinformation concerning theWorking Width of the system.

SafeRoad BLG Ltd.Dragonby ValeEnterprise ParkManaberg WayScunthorpe

W6 B North LincolnshireDN15 8XFTel. 01724 289119email: [email protected]

N2

Advanced VarioguardN2 Double SidedSteel Safety Barrier

Note: For a differentinstallation length pleasecontact the Promoter forinformation concerning theWorking Width of the system.

For a tested length of 64mbetween end anchors, andanchored in accordance with theEN1317 compliant test, theworking width class shall be:

Temporary Safety Barriers TB 33 March 2011

Page 37: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CommentSafety Barrier Type Containment Performance Class Working Width Class Name and Address of PromoterW6 A Trinity Highway Products International

Crown HouseW8 A Crown Street

IpswichSuffolkIP1 3HSTel. 01473 22 11 05Fax: 01473 22 11 06email: [email protected] site: www.energyabsorption.com

END OF TEMPORARY SAFETY BARRIER SECTION - RETURN TO CONTENTS

H2

Vulcan Safety Barrier N2

Temporary Safety Barriers TB 34 March 2011

Page 38: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedW4 B

ScotlandIV6 7UATel. (01463) 870194

W3 C

ScotlandIV6 7UATel. (01463) 870194

A Francesco TessariIMEVA

W5 82 100 BeneventoLocalita Ponte ValentinoArea Industriale ASIZona 75ItalyTel. 0039 08 24481211email: [email protected]

H2 W5 B Holgate Infrastruture and Motorway Services137 Gelderd RoadLeedsWest YorkshireLS12 6BZUnited KingdomTel.: 0113 244 4458Email [email protected] www.holgate.ieFracasso Website: www.fracasso.it

The installation ofparapets with an ASIClass of C must bewith the agreement ofthe OverseeingOrganisation (refer toTD19/06, Sections4.11 and 4.12).

With post centres at 3.0m theWorking Width Class is:

Muir of OrdRoss-Shire

email:[email protected]

BPL 200 AluminiumParapet System

PARAPETS

N2Containment Performance ClassParapet Type

BPL AluminiumParapet System

The following Parapets have been successfully tested to meet the requirements of BS EN 1317 -1 and -2 and have been accepted for use on the Highways AgencyTrunk Road Network for the Containment Performance Class and Working Width Class stated below.Please note: that all parapets must be installed by qualified personnel in accordance with sector scheme 5B.The parapets shall comply with the manufacturers Specification, component descriptions and Installation procedures.Further information on Impact Severity Levels for the product and copies of documents and drawings can be obtained from the Promoter.

Working Width Class Name and Address of Promoter

N2

Ross-Shire

Bridge Parapets Ltd

email:[email protected]

Muir of OrdTomich Industrial Estate

Bridge Parapets LtdTomich Industrial Estate

IMEVA H2 SteelParapet

H2

Fracasso Type3ni24335 SingleSided Parapet

Parapets P 35 March2011

Page 39: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedContainment Performance ClassParapet Type Working Width Class Name and Address of PromoterH2 W4 A Holgate Infrastruture and Motorway Services

137 Gelderd RoadLeedsWest YorkshireLS12 6BZUnited KingdomTel.: 0113 244 4458Email [email protected] www.holgate.ieFracasso Website: www.fracasso.it

H2 W8 B Holgate Infrastruture and Motorway Services137 Gelderd RoadLeedsWest YorkshireLS12 6BZUnited KingdomTel.: 0113 244 4458Email [email protected] www.holgate.ieFracasso Website: www.fracasso.it

H4a W6 B Holgate Infrastruture and Motorway Services137 Gelderd RoadLeedsWest YorkshireLS12 6BZUnited KingdomTel.: 0113 244 4458

Email [email protected]

Website www.holgate.ieFracasso Website: www.fracasso.it

H3 W7 A Holgate Infrastruture and Motorway Services(With diffractor) 137 Gelderd Road

LeedsW4 A West Yorkshire

(without diffractor) LS12 6BZUnited KingdomTel.: 0113 244 4458

Email [email protected]

Website www.holgate.ieFracasso Website: www.fracasso.it

Fracasso Type3ni21303 SingleSided Parapet

Fracasso TypeISB26482 SingleSided Parapet +acoustic barrier

Fracasso TypeISB27757 SingleSided Parapet +accoustic barrier

Fracasso Type3n32122 Single SidedParapet

Parapets P 36 March2011

Page 40: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedContainment Performance ClassParapet Type Working Width Class Name and Address of PromoterW2 B SafeRoad BLG

Dragonby ValeEnterprise ParkManaberg WayScunthorpeNorth LincolnshireDN15 8XF

Tel. 01724 289119

email: [email protected] SafeRoad BLG Ltd.

Dragonby ValeW1 Enterprise Park

Manaberg Way YESScunthorpeNorth LincolnshireDN15 8XFTel. 01724 289119

email: [email protected] SafeRoad BLG Ltd.

Dragonby ValeW2 Enterprise Park

Manaberg Way YESScunthorpeNorth LincolnshireDN15 8XFTel. 01724 289119email: [email protected]

B SafeRoad BLG Ltd.

Dragonby ValeW3 Enterprise Park

Manaberg Way YESScunthorpeNorth LincolnshireDN15 8XFTel. 01724 289119email: [email protected]

B SafeRoad BLG Ltd.Dragonby Vale

W4 Enterprise ParkManaberg WayScunthorpeNorth LincolnshireDN15 8XFTel. 01724 289119email: [email protected]

With post centres at 3.0m theWorking Width Class is:

SafeRoad SN1parapet

N1 With post centres at 3.75m theWorking Width Class is:

With post centres at 3.8m theWorking Width Class is:

N1

N2

With post centres at 2.0m theWorking Width Class is:

N2 or H2

Balmer LindleyPhoenix N1Aluminium Parapet

H2

Balmer LindleyPhoenix N2Aluminium Parapet

Note: Only permitted for use onroads where a speed limit of lessthan 50 mph is operative.

Sicuro H2 SteelParapet

Note: Only permitted for use onroads where a speed limit of lessthan 50 mph is operative.

Balmerguard H2 SteelParapet

Parapets P 37 March2011

Page 41: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedContainment Performance ClassParapet Type Working Width Class Name and Address of PromoterB SafeRoad BLG Ltd.

Dragonby ValeW4 Enterprise Park

Manaberg Way YESScunthorpeNorth LincolnshireDN15 8XFTel. 01724 289119email: [email protected]

W5 B Sistema Construction (UK) Ltd.Unit CShepherds Grove Industrial Estate (East)StantonBury St EdmundsSuffolkIP31 2BFTel. 01359 251 248Fax. 01359 251 201Mobile. 07740 122 982email: [email protected] email: [email protected]

B Tata Steel Tubes EuropePO Box 101

W3 Weldon RoadCorby

B NorthantsNN17 5UA

W4 Tel. 01536 402121email:[email protected]

B Tata Steel Tubes EuropePO Box 101

W4 Weldon RoadCorbyNorthantsNN17 5UA

W4 Tel. 01536 402121email:[email protected]

With post centres at 2.5m theWorking Width Class is:

With post centres at 3.75m theWorking Width Class is:

With post centres at 2.5m theWorking Width Class is:

Note: For intermediate postpositions themanufacturer/Promoter will beresponsible for declaring theworking width.

With post centres at 3.75m theWorking Width Class is:

N2

With post centres at 3.75 m theWorking Width Class is:

SafeRoad SN2parapet

Protect 365 N2parapet

(formerlyCorus HBP 300 N2Steel Parapet)

N2

Protect 365 H4aParapet

(formerlyCorus Tubes CelsiusHBP 300 H4a SteelParapet)

H4a

Sistema SteelgardBarrier

H4a

Parapets P 38 March2011

Page 42: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedContainment Performance ClassParapet Type Working Width Class Name and Address of PromoterA Tata Steel Tubes Europe

PO Box 101W1 Weldon Road

CorbyA Northants

NN17 5UAW2 Tel. 01536 402121

email:[email protected] Tata Steel Tubes Europe

PO Box 101W1 Weldon Road

CorbyA Northants

NN17 5UAW1 Tel. 01536 402121

email:[email protected] B Varley and Gulliver Ltd

Alfred StreetSparkbrookBirminghamB12 8JRTel. (0121) 773 2441email: [email protected]

W1 B Varley and Gulliver LtdAlfred StreetSparkbrookBirmingham

B12 8JRTel. (0121) 773 2441email: [email protected]

N2 W2 C Varley and Gulliver LtdAlfred StreetSparkbrookBirminghamB12 8JRTel. (0121) 773 2441email: [email protected]

W1 A Varley and Gulliver LtdAlfred StreetSparkbrookBirminghamB12 8JRTel. (0121) 773 2441email: [email protected]

The installation ofparapets with an ASIClass of C must bewith the agreement ofthe OverseeingOrganisation (refer toTD19/06, Sections4.11 and 4.12).

N1 With post centres at 2.5m theWorking Width Class is:

N2

VGSN 500 N1 SteelParapet

N1

With post centres at 3.75 m theWorking Width Class is:

Note: Only permitted for use onroads where a speed limit of lessthan 50 mph is operative.

With post centres at 2.5m theWorking Width Class is:

N1

Note: Only permitted for use onroads where a speed limit of lessthan 50 mph is operative.

With post centres at 3.75 m theWorking Width Class is:

VGSN 1000 N2 SteelParapet

Protect 365 N1Parapet

(formerlyCorus Protect 365 N13 Rail Steel Parapet)

Protect 365 N1Vertical Infill SteelParapet

Note: Only permitted for use onroads where a speed limit of lessthan 50 mph is operative.

VGAN 1000 N2Aluminium Parapet

N2

VGSN 900 N2 SteelParapet

Parapets P 39 March2011

Page 43: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment CE MarkedContainment Performance ClassParapet Type Working Width Class Name and Address of PromoterW2 A Varley and Gulliver Ltd

Alfred StreetSparkbrookBirminghamB12 8JRTel. (0121) 773 2441email: [email protected]

B Varley and Gulliver LtdAlfred Street

W3 SparkbrookBirminghamB12 8JRTel. (0121) 773 2441email: [email protected]

B Varley and Gulliver LtdAlfred Street

W3 SparkbrookBirminghamB12 8JRTel. (0121) 773 2441email: [email protected]

END OF PARAPET SECTION - RETURN TO CONTENTS

Varley and GulliverSteel V6Guard H4aParapet

With post centres at 2.0m theWorking Width Class is:

Note: Only permitted for use onroads where a speed limit of lessthan 50 mph is operative.

VGSH 2000 H2 SteelParapet

H2

VGAN 500 N1Aluminium Parapet

H4a With post centres at 1.5m theWorking Width Class is:

N1

Parapets P 40 March2011

Page 44: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

Exit BoxClass/Vehicle

Redirection Zone

ASI

P4 Z1 ASpringvale AvenueBilstonWolverhamptonWV14 OQL

P4 Z1 ASpringvale AvenueBilstonWolverhamptonWV14 OQL

50mph or moreBrifen (A Division of Hill and Smith)

Brifen (A Division of Hill and Smith) 50mph or more

Tel. 01902 499400

email: [email protected]

Tel. 01902 499400Fax. 01902 499419

Fax. 01902 499419email: [email protected]

TERMINALS

Brifen P4 Wire RopeEnd Terminal forBrifen 4 Rope SafetyFence

D.1.1

Brifen P4 Wire RopeEnd Terminal forBrifen 3 Rope SafetyFence

D.1.1

Terminal Type

The following Terminals for safety barriers have been successfully tested to meet the requirements of DD ENV 1317 - 4 and have been accepted for use onthe Highways Agency Trunk Road Network for the Performance Class and Permanent Lateral Displacement Zone (PLDZ) Class Code stated below.The Terminals shall comply with the manufacturers Specification, component descriptions and Installation procedures.Please note: that all safety barriers must be installed by qualified personnel in accordance with sector scheme 2B.Additional information on Exit Box and Impact Severity Levels for the product and copies of documents and drawings can be obtained from the Promoter.Installers shall have successfully undertaken suitable training for the system to be installed.

Note: please refer to Table 6, DD ENV 1317 - 4 for PLDZ and Class Codes for terminals. The values of Displacement (measured in metres) Da and Dd areconverted to Class Code x and y. Therefore Class Code D1.1 (where 'D' is displacement) represents 0.5m displacement (x), measured from the traffic faceof the barrier towards the traffic, and 1.0m (y) measured from the traffic face of the barrier to the rear of the barrier. D1.3 represents a displacement of 0.5min front of the barrier and 3.5m to the rear of the barrier.

Performance Class PLDZ Class Code Name and Address of Promoter Comments

Terminals T 41 March 2011

Page 45: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

Exit BoxClass/Vehicle

Redirection Zone

ASITerminal Type Performance Class PLDZ Class Code Name and Address of Promoter Comments

Terminus CEN P4 Z2 A Energy Absorption Systems IncCrown HouseCrown StreetIpswichSuffolkIP1 3HS

Tel. 01473 22 11 05Fax. 01473 22 11 06email: [email protected]

P4 Z1 B Highway Care Ltd.The HighlandsDetling HillDetlingMaidstoneKentME14 3HT

Tel. 01622 734215Fax. 01622 735106email: [email protected] site: www.highwaycare.co.uk

P4 Z2 B Highway Care Ltd.The HighlandsDetling HillDetlingMaidstoneKentME14 3HT

Tel. 01622 734215Fax. 01622 735106email: [email protected] site: www.highwaycare.co.uk

ABC Terminal P4 Z1 B Hill and Smith Ltd.Springvale Business and Industrial ParkBilstonWolverhamptonWV14 0QL

Tel. 01902 499400Fax. 01902 499419email: [email protected]

Xtension 110Terminal

D.1.1 50mph or more

Double SidedXtension P4 Terminal(also known as the X-Tension 110 DoubleSided P4 Terminal(XT-DS110))

50mph or more

50mph or more

50mph or moreD1.1

D.1.1

D.1.1

Terminals T 42 March 2011

Page 46: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

Exit BoxClass/Vehicle

Redirection Zone

ASITerminal Type Performance Class PLDZ Class Code Name and Address of Promoter Comments

P4 Z2 A Hill and Smith Ltd.Springvale AvenueBilstonWolverhamptonWV14 0QL

Tel. 01902 499400Fax. 01902 499419email: [email protected]

P1 Z1 A Hill and Smith Ltd.Springvale AvenueBilstonWolverhamptonWV 0QL

Tel. 01902 499400Fax: 01902 499419email: [email protected] site: www.hill-smith.co.uk

P1 Z1 A Hill and Smith Ltd.Springvale AvenueBilstonWolverhamptonWV 0QL

Tel. 01902 499400Fax: 01902 499419email: [email protected] site: www.hill-smith.co.uk

P1 Z1 A Hill and Smith Ltd.Springvale AvenueBilstonWolverhamptonWV 0QLTel. 01902 499400Fax: 01902 499419email: [email protected] site: www.hill-smith.co.uk

50mph or more, verge only

Less than 50mph, or on thedeparture end of a safety barriernot facing oncoming traffic wherethe speed limit is 50mph or more.

Less than 50mph, or on thedeparture end of a safety barriernot facing oncoming traffic wherethe speed limit is 50mph or more.

Less than 50mph, or on thedeparture end of a safety barriernot facing oncoming traffic wherethe speed limit is 50mph or more.

Hill and Smith 'SafetyLine' Wire RopeSafety FenceTerminal

Flex-Beam SingleSided P1 EndTerminal

D.1.1

D.1.1

D.1.1

D.1.3Trinity Euro ET EndTerminal

Flex-Beam DoubleSided P1 EndTerminal

Terminals T 43 March 2011

Page 47: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

Exit BoxClass/Vehicle

Redirection Zone

ASITerminal Type Performance Class PLDZ Class Code Name and Address of Promoter Comments

P4 Z2 B Hill and Smith Ltd.Springvale AvenueBilstonWolverhamptonWV14 0QLTel. 01902 499400Fax. 01902 499419email: [email protected]

P4 Z1 B Marcegaglia buildtech S.r.lNew RoadNethertonDudleyWest MidlandsDY2 8TA

Tel. 01384 242 812Fax. 01384 242 813email: [email protected]

P1 Z1 A Tata Steel Construction ProductsLlanwern WorksNewportSouth WalesNP19 4QZ

Tel. 01633 290011email: [email protected]

END OF TERMINAL SECTION - RETURN TO CONTENTS

50mph or moreSistema P4PerformanceTerminal

D1.2

Less than 50mph, or on thedeparture end of a safety barriernot facing oncoming traffic wherethe speed limit is 50mph or more.

Trinity Euro BXTTerminal

D.1.2 50mph or more

Terminals detailed in the NPSBS are deemed acceptable for use on the Highways Agency Trunk Road Network on roads with a speed limit less than 50mph. In addition the terminals can be used on the departure end of safety barriers where the terminal does not face oncoming traffic and the speed limit is50mph or more.These terminals do not need a Departure from Standard submission, as they have proven in-service use over a number of years.Please contact the Promoter's of DROBB, OBB and TCB listed in the Safety Barrier section for further information.Installers shall have successfully undertaken suitable training for the system to be installed.

Tata Steel Vetex P1End Terminal

D.1.1

Terminals T 44 March 2011

Page 48: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

Acklea Ltd.Unit 1Clark AvenuePorte Marsh Industrial EstateClaneWiltshireSN11 9RD

Tel. 01249 822 600Fax. 01249 820 111email: [email protected] Highway Products Ltd.EriversideMarket HarboroughLeicestershireLE16 7PX

Tel. 08707 475969Fax. 08707 475970email: [email protected]

Trinity MPS-350 Lorry MountedCrash Cushion(For use on roads with aspeed limit of 70mph or less)

LORRY MOUNTED CRASH CUSHIONS

The following Lorry Mounted Crash Cushions (LMCC) meet the requirements of TD 49/07 and hence, have demonstratedcompliance with a 1500kg car impact at the speed of the performance class. They may be used on the Highway AgencyTrunk Road Network provided that a special dispensation order known as a Vehicle Special Order (VSO) is obtained fromthe Department for Transport.In addition a Vehicle Inspectorate Form VTG 10 will need to be filed if the LMCC is fitted with an auto impact brake system.The LMCC shall comply with the manufacturers Specification, component descriptions and Installation procedures. Copiesof documents and drawings can be obtained from the Promoter.

Name and Address of PromoterVehicle AttenuatorsScorpion Lorry Mounted CrashCushion(For use on roads with aspeed limit of 70mph or less)

Lorry Mounted Crash Cushions LMCC 45 March 2011

Page 49: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

Name and Address of PromoterVehicle AttenuatorsVorteq Trailer Trinity Highway Products International - represented by:

King Highway Products Ltd.EriversideMarket HarboroughLeicestershireLE16 7PX

Tel. 08707 475969Fax. 08707 475970email: [email protected] Highway Products International - represented by:King Highway Products Ltd.EriversideMarket HarboroughLeicestershireLE16 7PX

Tel. 08707 475969Fax. 08707 475970email: [email protected]

END OF LORRY MOUNTED CRASH CUSHION SECTION - RETURN TO CONTENTS

SafeStop Lorry Mounted CrashCushion(For use on roads with aspeed limit of 70mph or less)

(For use on roads with aspeed limit of 70mph or less)

Lorry Mounted Crash Cushions LMCC 46 March 2011

Page 50: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI Comment

Varioguard Transition W2 B Asset International (A Division of Hill and Smith)(Transition betweenVarioguard andSafety Barrier)

WV14 0QL

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

W6 ASpringvale AvenueBilstonWolverhamptonWV14 OQL

Tel. 01902 499400

Fax. 01902 499419

H2 W4 C Delta Bloc United Kingdom Ltd1200 Century WayThorpe Park Business ParkColtonLeeds LS15 8ZATel. 0845 30 40 705Fax. 0845 30 40 706email: [email protected] site: www.deltabloc.co.uk

BRITRANS' OpenBox Beam to WireRope Safety FenceTransition

Name and Address of Promoter

Brifen (A Division of Hill and Smith)

Use of thistransition must bewith the agreementof the OverseeingOrganisation (referto TD19/06, Section6.6).

TRANSITIONS

Transion Type Containment Performance Class

N2

DB SafeLinkTransition (DB100Sto DB90 Step)

The following Transitions have been successfully tested to meet the requirements of ENV 1317 - 4 and has been accepted for use on the HighwaysAgency Trunk Road Network for the Containment Performance Class and Working Width Class stated below.The Transition shall comply with the manufacturers Specification, component descriptions and Installation procedures. Further information onImpact Severity Levels for the product and copies of documents and drawings can be obtained from the Promoter.Installers shall have successfully undertaken suitable training for the system to be installed.

Working Width Class

Wolverhampton

Springvale AvenueBilston

email: [email protected]

N2

Transitions Trans 47 March 2011

Page 51: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CommentName and Address of PromoterTransion Type Containment Performance Class Working Width Class

W2 B Hill and Smith Ltd.Springvale AvenueBilstonWolverhamptonWV 0QL

Tel. 01902 499400Fax: 01902 499419email: [email protected] site: www.hill-smith.co.uk

W2 B Hill and Smith Ltd.Springvale AvenueBilstonWolverhamptonWV 0QL

Tel. 01902 499400Fax: 01902 499419email: [email protected] site: www.hill-smith.co.uk

W2 B Hill and Smith Ltd.Springvale AvenueBilstonWolverhamptonWV 0QL

Tel. 01902 499400Fax: 01902 499419email: [email protected] site: www.hill-smith.co.uk

W2 B Hill and Smith Ltd.Springvale AvenueBilstonWolverhamptonWV 0QL

Tel. 01902 499400Fax: 01902 499419email: [email protected] site: www.hill-smith.co.uk

Note: Only permitted for use onroads where a speed limit of lessthan 50 mph is operative.

Tranzflex 110 N2Flexbeam to N1 W1VGSN 500 ParapetTransition

N1

N2Tranzflex 120 N2Flexbeam to N2 W1VGSN 1000 ParapetTransition

Tranzflex 130 N2Flexbeam to N1 W2VGAN 500 ParapetTransition

Note: Only permitted for use onroads where a speed limit of lessthan 50 mph is operative.

N1

Tranzflex 100 N2Flexbeam to SingleSided H1/H2Flexbeam PlusTransition

N2

Transitions Trans 48 March 2011

Page 52: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CommentName and Address of PromoterTransion Type Containment Performance Class Working Width Class

W2 B Hill and Smith Ltd.Springvale AvenueBilstonWolverhamptonWV 0QL

Tel. 01902 499400Fax: 01902 499419email: [email protected] site: www.hill-smith.co.uk

N2 W2 Hill and Smith Ltd.Springvale AvenueBilstonWolverhamptonWV 0QL

Tel. 01902 499400Fax: 01902 499419email: [email protected] site: www.hill-smith.co.uk

N2 W2 Hill and Smith Ltd.Springvale AvenueBilstonWolverhamptonWV 0QL

Tel. 01902 499400Fax: 01902 499419email: [email protected] site: www.hill-smith.co.uk

N2 W3 B Hill and Smith Ltd.Springvale AvenueBilstonWolverhamptonWV 0QL

Tel. 01902 499400Fax: 01902 499419email: [email protected] site: www.hill-smith.co.uk

N2

Refer toPromotor

Tranzflex 140 N2Flexbeam to N2 W2VGAN 1000 ParapetTransition

Tranzflex 150 N2Flexbeam to H2 W3VGSH 2000 ParapetTransition

Refer toPromotor

Tranzflex 200 N2 W4Double sidedFlexBeam to H2 W5Double sided Bri-FlexTransition

Tranzflex 160 N2Flexbeam to H4a W3V6Guard ParapetTransition

Transitions Trans 49 March 2011

Page 53: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CommentName and Address of PromoterTransion Type Containment Performance Class Working Width Class

N2 W4 B SafeRoad BLG Ltd.Dragonby ValeEnterprise ParkMannaberg WayScunthorpeNorth LincolnshireDN15 8XF

Tel. 01724 289119Fax. 01724 281478email: [email protected]

N2 W3 B Tata Steel Construction ProductsLlanwern WorksNewportSouth WalesNP19 4QZ

Tel. 01633 290011email: [email protected]

N2 W3 B Tata Steel Tubes EuropePO Box 101Weldon RoadCorbyNorthantsNN17 5UATel. 01536 402121email:[email protected]

N2 W2 B Tata Steel Tubes EuropePO Box 101Weldon RoadCorbyNorthantsNN17 5UATel. 01536 402121email:[email protected]

W2 B Tata Steel Tubes EuropePO Box 101Weldon RoadCorbyNorthantsNN17 5UATel. 01536 402121email:[email protected]

Balmerflex Transition(H2W1 Balmerguardparapet to N2W4safety fence)

Protect 365 N2Safety Fence toProtect 365 N2Parapet transition

Vetex N2W2 SafetyFence to Protect 365N2W3 or N2W4Transition

Protect 365 H4aParapet to Protect365 N2 ParapetTransition

Vetex N2 SafetyFence to Protect 365N2 Safety FenceTransition

N2

Transitions Trans 50 March 2011

Page 54: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CommentName and Address of PromoterTransion Type Containment Performance Class Working Width Class

W5 B Technische Sichereits-Systeme (TSS) GmbHAlfred Schutte-Allee 10D-50679 CologneGermany

Tel. +49 221 980601Fax. 49 221 9806490email: [email protected]

END OF TRANSITION SECTION - RETURN TO CONTENTS

H2

Transitions detailed in the NPSBS (Revision 1) are deemed acceptable for use on the Highways Agency Trunk Road Network, without the need fora Departure from Standard submission, as they have proven in-service use over a number of years.Please contact Promoter's of DROBB, OBB and TCB listed in the Safety Barrier Section for further information.

TSS Vario -Transition betweenGerman B-profilesafety fence and TSSSoftbaer concretebarrier

Transitions Trans 51 March 2011

Page 55: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASIBIKEGUARD A

MaidstoneKentME14 3HT

Web site: www.highwaycare.co.ukFlexGuard Hill and Smith Ltd.

Springvale AvenueBilstonWolverhamptonWV 0QL

Tel. 01902 499400Fax: 01902 499419email: [email protected] site: www.hill-smith.co.uk

END OF MISCELLANEOUS SECTION - RETURN TO CONTENTS

Name and Address of Promoter

MISCELLANEOUS

Tel. 01622 734215

Detling HillDetling

Highway Care Ltd.

The following products have been accepted for use on the Highways Agency Road Network.

(Motorcyclist Protection Systemfitted to safety barriers)

Motorcyclist Protection System fitted toFlexBeam/FlexBeam Plus (both single anddouble sided versions of these systems), theHill and Smith H1/H2 safety barrier, and theBriflex vehicle restraint system.

As per the hostsafety barrier

Fax. 01622 735106email: [email protected]

Product

(Motorcyclist Protection Systemfitted to safety barriers)

Comments

BIKEGUARD may be fitted to any UKsystem listed in the Non-Proprietary SafetyBarrier Systems (NPSBS). It may also befitted to any other system in the HighwaysAgency Approved Road Restraint SystemList providing that Highway Care Limited firstobtains the approval of thePromoter/Manufacturer of the safety barriersystem BIKEGUARD is to be attached to.

The Highlands

Miscellaneous M 52 March 2011

Page 56: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CE MarkedRe - Direction Zone Class - Z1 A Asset International (A Division of Hill and Smith) YES

Springvale AvenueLateral Displacement Zone Class - D1 Bilston

WolverhamptonWV14 0QL

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

Re - Direction Zone Class - Z4 B Asset International (A Division of Hill and Smith)Springvale Avenue

Lateral Displacement Zone Class - D1 BilstonWolverhamptonWV14 0QL

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

Re - Direction Zone Class - Z4 B Asset International (A Division of Hill and Smith)Springvale Avenue

Lateral Displacement Zone Class - D1 BilstonWolverhamptonWV14 0QL

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

(For use on roads witha speed limit of 50mph

or less)

Vecu-Stop Re-Directionaland Bi-Directional CrashCushion - Model 2.13P

100kph

Euro - Tracc Re-Directionaland Bi-Directional CrashCushion

Vecu-Stop Re-Directionaland Uni-Directional CrashCushion - Model 2.14P andModel 4.14T

(For use on roads witha speed limit greater

than 50mph )

(For use on roads witha speed limit greater

than 50mph)

110kph

110kph

CRASH CUSHIONS

Crash Cushion Performance Level Name and Address of PromoterZone Classes

The following Crash Cushions have been successfully tested to meet the requirements of BS EN 1317 - 3 and have been accepted for use on theHighways Agency Trunk Road Network for the Performance Level and Zone Classes stated below.Please note: that all safety barriers must be installed by qualified personnel in accordance with sector scheme 2B.The Crash Cushions shall comply with the manufacturers Specification, component descriptions and Installation procedures. Copies ofdocuments and drawings can be obtained from the Promoter.

Crash Cushions CC 53 March 2011

Page 57: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CE MarkedCrash Cushion Performance Level Name and Address of PromoterZone ClassesRe - Direction Zone Class - Z1 B Asset International (A Division of Hill and Smith) YES

Springvale Business and Industrial ParkLateral Displacement Zone Class - D1 Bilston

WolverhamptonWV14 0QL

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

Re - Direction Zone Class - Z1 B Asset International (A Division of Hill and Smith) YESSpringvale Business and Industrial Park

Lateral Displacement Zone Class - D1 BilstonWolverhamptonWV14 0QL

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

Re - Direction Zone Class - Z2 B Asset International (A Division of Hill and Smith) YESSpringvale Business and Industrial Park

Lateral Displacement Zone Class - D2 BilstonWolverhamptonWV14 0QL

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

Re - Direction Zone Class - Z1 B

Lateral Displacement Zone Class - D1

MaidstoneKentME14 3HT

Web site: www.highwaycare.co.uk

(For use on roads witha speed limit greater

than 50mph)

Quest Bi-Directional and Re-Directional Crash Cushion

Quadguard Re-Directionaland Bi-Directional CrashCushion (4 No. Energyabsorbing cells)

(For use on roads witha speed limit of 50mph

or less)

100kph

110kph

Quadguard Re-Directionaland Bi-Directional CrashCushion (6 No. Energyabsorbing cells) (For use on roads with

a speed limit greaterthan 50mph)

110kph

TAU Bi-Directional and Re-Directional family of CrashCushions

email: [email protected]

Highway Care Ltd.The HighlandsDetling HillDetling

100kph

(For use on roads witha speed limit of 50mph

or less)

Tel. 01622 734215Fax. 01622 735106

Crash Cushions CC 54 March 2011

Page 58: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASI CE MarkedCrash Cushion Performance Level Name and Address of PromoterZone ClassesRe - Direction Zone Class - Z1 B

Lateral Displacement Zone Class - D1

MaidstoneKentME14 3HT

Web site: www.highwaycare.co.uk

END OF CRASH CUSHION SECTION - RETURN TO CONTENTS

TAU-B Bi-Directional and Re-Directional Family of CrashCushions

Highway Care Ltd.The HighlandsDetling Hill

Fax. 01622 735106email: [email protected]

110kph

(For use on roads witha speed limit greater

than 50mph)Detling

Tel. 01622 734215

Crash Cushions CC 55 March 2011

Page 59: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASIW5 B

WV14 0QL

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

W7 B SafeRoad BLG Ltd.Dragonby ValeEnterprise ParkManaberg WayScunthorpeNorth LincolnshireDN15 8XFTel. 01724 289119email: [email protected]

Safety Barrier Gate Containment Performance ClassSOLOGUARDEmergency andMaintenanceCrossing PointSystem

BilstonWolverhampton

Gateguard RemovalBarrier System

Asset International (A Division of Hill and Smith)Working Width Class

SAFETY BARRIER GATES

The following Safety Barrier Gates have been successfully tested to meet the requirements of BS EN 1317- 1 and 2 and DD ENV1317 - 4 and have been accepted for use on the Highways Agency Trunk Road Network for the Containment Performance Classand Working Width Class stated below.The Safety Barrier Gates shall comply with the manufacturers Specification, component descriptions and Installation procedures.Further information on Impact Severity Levels for the product and copies of documents and drawings can be obtained from thePromoter.Installers shall have successfully undertaken suitable training for the system to be installed.

Name and Address of Promoter

H2

H1Springvale Avenue

Safety Barrier Gates SBG 56 March 2011

Page 60: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASIW6 A Snoline spa, represented by:

Highway Care Ltd.The HighlandsDetling HillDetling HillMaidstoneKentME14 3HT

Tel. 01622 734215Fax. 01622 735106email: [email protected] site: www.highwaycare.co.uk

S-A-B Class H2 Gate(For emergency andmaintenance crossover points)

N2 and H2Safety Barrier Gate Containment Performance Class Working Width Class Name and Address of Promoter

Safety Barrier Gates SBG 57 March 2011

Page 61: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASIW2

WV14 0QL

Tel. 01902 499402Fax. 01902 402104email: [email protected] Site: www.asset-vrs.co.uk

W2 BritpaveAtrium CourtThe RingBracknellBerkshireRG12 1BW

Tel. 01344 393300email: [email protected] site: www.britpave.org.uk

Name and Address of Promoter

Springvale AvenueBilston

Asset International (A Division of Hill and Smith)Refer toPromoter

Safety Barrier Gate

Wolverhampton

Refer toPromoter

Steel Step BarrierGate (For Emergencyand MaintenanceCrossing Points)

Steel Step CorridorSystem ( ForEmergency andMaintenanceCrossing Points)

H2

H2

The following Safety Barrier Gates have the same profile and performance characteristics of their compliant BS EN 1317 safetybarriers which have been tested to meet the requirements of BS EN 1317 - 1 and 2 and are deemed acceptable for use on theHighways Agency Trunk Road Network for the Containment Performance Class and Working Width Class stated below.The Safety Barrier Gates shall comply with the manufacturers Specification, component descriptions and Installation procedures.Further information on Impact Severity Levels for the product and copies of documents and drawings can be obtained from thePromoter.

Containment Performance Class Working Width Class

Safety Barrier Gates SBG 58 March 2011

Page 62: HA ACCEPTED EN1317 COMPLIANT ROAD RESTRAINT SYSTEMS · Organisation (refer to TD19/06, Sections 3.6 and 3.7). The installation of safety barriers with an ASI Class of C must be with

ASIW5 Highway Care Ltd.

The HighlandsW8 Detling Hill

DetlingMaidstoneKentME14 3HT

Web site: www.highwaycare.co.uk

END OF SAFETY BARRIER GATE SECTION - RETURN TO CONTENTS

Safety Barrier Gate Containment Performance Class Working Width Class Name and Address of Promoter

email: [email protected]

Tel. 01622 734215Fax. 01622 735106

N2

H2

Refer toPromoter

Barrierguard 800Gate (For Emergencyand MaintenanceCrossing Points)

Safety Barrier Gates SBG 59 March 2011