hall c compton polarimeter preliminary design by the qweak polarimetry working group s. kowalski,...
Post on 21-Dec-2015
216 views
TRANSCRIPT
![Page 1: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/1.jpg)
Hall C Compton PolarimeterPreliminary Designby the
Qweak Polarimetry Working Group
S. Kowalski, M.I.T. (chair)D. Gaskell, Jefferson LabR.T. Jones, K. Joo, U. Connecticut
with modifications forQweak collaboration meetingBoston, October 10-11, 2003
Hall C Polarimetry WorkshopNewport News, June 9-10, 2003
![Page 2: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/2.jpg)
2
Outline
Overview of Qweak Qweak plan for polarimetry Criteria for the Compton design The Compton chicane Pulsed vs. coincidence operation Monte Carlo simulation Laser options Detector options Outlook
![Page 3: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/3.jpg)
3
Overview of Qweak
Precision measurement of proton weak form factor at low Q2
At Q2 0 interpretation is clean: running of sin2w
Interesting proposals for New Physics show deviations from
SM at the level 0.5% in sin2w
Qweak of proton (1 - 4sin2w) is a sensitive measure:
Qw/Qw = 5% sin2w/sin2w = 0.5%
Measuring Qweak to 5% requires measuring ALR in polarized
electron scattering at the level 3%.
![Page 4: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/4.jpg)
4
Beam requirements for Qweak
E = 1.165 GeV (1-pass) I = 180 A P = 80% (known to ±1%) ALR(proton) ~ 3·10-7 at Q2 ~ .03 GeV2
– beam position stability 100 m (40 nm)– beam size stability --- (2 m)– beam angle stability 100 r (60 nr)– beam energy stability 10-3 (10-8)– P expected to vary > 1% during run
continuous monitoring of polarization
![Page 5: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/5.jpg)
5
Qweak plan for polarimetry
Design goal: 1% overall uncertainty on P Moller runs: measure P at fixed intervals
– requires reduction in current to few A
– sufficient precision reached in short time (30 min.)
– reliable for absolute measurement at 1%
– can be used to calibrate the Compton
Build a Compton polarimeter for Hall C– runs continuously
– should be capable of 1% systematic error over periods between Moller runs
![Page 6: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/6.jpg)
6
Qweak plan for polarimetry, cont.
Relevant parameter is average P over run– want luminosity-weighted average
– corrections are second order in ALR
Information from Hall A useful for monitoring stability and performing consistency checks.
Qweak should be able to measure polarization and verify accuracy independent of what is going on in other halls.
![Page 7: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/7.jpg)
7
Criteria for the Compton design
Measure luminosity-weighted average polarization over period of ~1 hour with combined statistical and systematic errors of 1.5% under Qweak running conditions
Control systematic errors at 1% level
Coexist with Moller on Hall C beamline
Configurable for running at higher energies, up to 11 GeV.
![Page 8: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/8.jpg)
8
The Compton chicane
10 m
2 m
D1
D2 D3
D4
Comptondetector
Comptonrecoildetector
D
4-dipole design accommodates both gamma and recoil electron detection small beam-laser crossing angle (~1 degree)
– protects mirrors from direct synchrotron radiation– implies significant cost in luminosity– simplifies alignment
![Page 9: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/9.jpg)
9
The Compton Chicane, cont.
![Page 10: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/10.jpg)
10
The Compton Chicane, cont.
Alex Bogacz (CASA) has found a way to fit the chicane into the existing Hall C beamline.
– independent focusing at Compton and target
– last quad triplet moved 7.4 m downstream
– two new quads added, one upstream of Moller and one between Moller arms
– fast raster moves closer to target, distance 12 m.
– beamline diagnostic elements also have to move
Focus with = 8 m near center of chicane
![Page 11: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/11.jpg)
11
The Compton Chicane, cont.
![Page 12: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/12.jpg)
12
The Compton Chicane, cont.
3 configurations support energies up to 11 GeV
Beam energy bend B D xe (=514nm)
(GeV) (deg) (T) (cm) (cm)
1.165 10 0.67 57 2.4 2.0 1.16 4.1 2.5 1.45 5.0 2.5 4.3 0.625 25 2.2 3.0 0.75 2.6 6.0 1.50 4.9 4.0 2.3 0.54 13 1.811.0 1.47 4.5
![Page 13: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/13.jpg)
13
Pulsed vs. coincidence operation
Detect both gamma and recoil electron– two independent detectors
– different systematics – consistency checks
Two methods to reject background counts1. gamma-electron coincidence
– rates should not be a limitation
– gets rid of some backgrounds
2. pulsed laser operation– backgrounds suppressed by duty factor of laser
– gets rid of additional bg, eg. bremsstrahlung
![Page 14: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/14.jpg)
14
Illustration of pulsed-mode operation
detectorsignal
signal gate
background gate
laseroutput
![Page 15: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/15.jpg)
15
Advantages of pulsed-mode operation
Two independent asymmetry measurements
More flexible choice of high-power lasers
Can provide high luminosity without the cost of a
mode-locked cavity.– A resonant cavity design requires high-reflectivity mirrors
which are sensitive to synchrotron light.
– To shield the mirrors generally requires a crossing angle of a degree or so.
– In general L ~ 1 / crossat such angles.
![Page 16: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/16.jpg)
16
Luminosity vs. crossing angle
Assume a green laser
= 514 nm Fix electron and laser foci
= 100 m Emittance of laser beam
scaled by diffraction limit
= M (/ 4
Scales like 1/cross down
to scale of beam divergence.
![Page 17: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/17.jpg)
17
How to “count” in pulsed-mode
Cannot count individual gammas because pulses overlap within a single shot.
Q. How is the polarization extracted?
A. By measuring the energy-weighted asymmetry.
Consider the general weighted yield:
Then for a given polarization, the asymmetry in Y depends in general on the weights wi used.
i
iw Y
![Page 18: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/18.jpg)
18
How to “count” in pulsed-mode
What is the optimal weight to use when forming the asymmetry?
The answer must depend on the Compton analyzing power
where ±(k) is shorthand for the polarized differential cross section, which depends on c.m. scattering angle or equivalently on lab scattered photon energy k.
)()(
)()()A(
kk
kkk
![Page 19: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/19.jpg)
19
Problem can be solved analytically
wi = A(k)
Solution is statistically optimal, maybe not for systematics.
Standard counting is far from optimal
wi = 1
Energy weight is better!
wi = k
How to “count” in pulsed-mode
![Page 20: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/20.jpg)
20
Define a figure-of-merit for a weighting scheme
How to “count” in pulsed-mode
f (ideal) f (wi=1)> f (wi=k)
514nm 2260 9070 3160
248 nm 550 2210 770
193 nm 340 1370 480
N
fp )ˆ(V
![Page 21: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/21.jpg)
21
Systematics of energy-weighted counting– measurement independent of gain– no need for absolute calibration of detector– no threshold
Can electron counter use a similar technique?– would need to be segmented– rate per segment should be < 1/shot– one scalar on each segment– weighting used when combining results from different
segments
How to “count” in pulsed-mode
![Page 22: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/22.jpg)
22
Monte Carlo simulations
Needed to study systematics from– beam-laser misalignment– detector misalignment– beam-related backgrounds– crossing angle effects– detector nonlinearities
Processes generated– Compton scattering from laser– synchrotron radiation in dipoles (with secondaries)– bremsstrahlung from beam gas (with secondaries)– standard Geant3 list of physical interactions
![Page 23: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/23.jpg)
23
Monte Carlo simulations
Compton-geant: based on original Geant3 program by Pat Welch
dipole chicane
backscatter exit portgamma detector
![Page 24: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/24.jpg)
24
Monte Carlo simulations
Several events superimposed
Compton recoil electron not yet simulated, coming soon
electron beam
Compton backscatter (and bremsstrahlung)
![Page 25: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/25.jpg)
25
Monte Carlo simulations
![Page 26: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/26.jpg)
26
Laser options
1. External locked cavity (cw)– Hall A used as reference
2. High-power UV laser (pulsed)– large analyzing power (10% at 180°)
– technology driven by industry (lithography)
– 65W unit now in tabletop size
3. High-power doubled solid-state laser (pulsed)– 100W commercial unit available
![Page 27: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/27.jpg)
27
Laser options: comparison
laser l P Emax rate <A> t (1%)option (nm) (W) (MeV) (KHz) (%) (min)
Hall A 1064 1500 23.7 480 1.03 5
UV ArF 193 32 119.8 0.8 5.42 100
UV KrF 248 65 95.4 2.2 4.27 58
Ar-Ion (IC) 514 100 48.1 10.4 2.10 51
DPSS 532 100 46.5 10.8 2.03 54
![Page 28: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/28.jpg)
28
Detector options
Photon detector– Lead tungstate – Lead glass
Electron detector– Silicon microstrip– Quartz fibers
![Page 29: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/29.jpg)
29
Summary
Qweak collaboration would like two independent methods to measure beam polarization.
A Hall C Compton polarimeter would complement the Moller and measure the average polarization during the experiment.
Concept for a chicane that imposes minimal disturbance to the present Hall C beamline has been worked out.
Using a pulsed laser system is feasible, and offers advantages in terms of background rejection.
Options now exist that come close to Qweak requirements with a green or UV laser, that use a simple one-pass setup.
Monte Carlo studies are underway to determine tolerances on detector performance and alignment required for 1% accuracy.
![Page 30: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/30.jpg)
30
Addendum: recent progress
![Page 31: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/31.jpg)
31
Addendum: recent progress
![Page 32: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/32.jpg)
32
Addendum: laser choices
High-power green laser (100 W @ 532 nm)– sold by Talis Laser– industrial applications– frequency-doubled solid state laser– pulsed design
D. Gaskell: visit from Talis Laser reps June 2003– not confident that they could deliver– product no longer being advertised (?)
![Page 33: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/33.jpg)
33
Addendum: laser choices
High-power UV laser (50 W @ 248 nm)– sold by several firms– industrial applications: micromachining and lithography– excimer laser (KrF)– pulsed design
R. Jones: visit from Lambda Physik reps Fall 2003– sales team has good technical support – plenty of experience with excimer lasers– strong interest in our application
![Page 34: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/34.jpg)
34
Addendum: laser choices
Properties of LPX 220i– maximum power: 40 W (unstable resonator)– maximum repetition rate: 200 Hz– focal spot size: 100 x 300 m (unstable resonator)– polarization: should be able to achieve ~90%
with a second stage “inverted unstable resonator”– maximum power: 50 W– repetition rate unchanged– focal spot size: 100 x 150 m– polarization above 90%
![Page 35: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/35.jpg)
35
Addendum: laser choices
two passes make up for losses in elements– small crossing angle: 1°– effective power from 2 passes: 60 W– mirror reflectivity: 97%– length of figure-8: 100 cm
UV laser
electron beam
monitor
![Page 36: Hall C Compton Polarimeter Preliminary Design by the Qweak Polarimetry Working Group S. Kowalski, M.I.T. (chair) D. Gaskell, Jefferson Lab R.T. Jones,](https://reader030.vdocument.in/reader030/viewer/2022032704/56649d5a5503460f94a3aea4/html5/thumbnails/36.jpg)
36
Addendum: laser choices
purchase cost for UV laser system– LPX-220i (list): 175 k$– LPX-220 amplifier (list): 142 k$– control electronics: 15 k$– mirrors, ¼ wave plates, lenses: 10 k$
cost of operation (includes gas, maintenance)– per hour @ full power: $35 (single)
$50 (with amplifier)
– continuous operation @ full power: 2000 hours