halo - site.electricsuppliesonline.comsite.electricsuppliesonline.com/documents/halo... · ergy...

Recessed Lightingin the 21st century

HALO®

HALO LEDLower EnergyReduce MaintenanceImprove Environment

T242008

California Title 24High Efficacy

Compliant

IECC

International Energy

Conservation Code

Code Compliant

2

HALO LEDFirst with

ENERGY STAR®

Qualification

ENERGY STAR® for Solid State Lighting (LED Luminaires)Concerned about LED luminaires? Caution is prudent and to be expected.The United States Department of Energy (DOE) commissioned by the USlegislature, coordinated a thorough review of the current LED and com-pact fluorescent luminaires supplied to consumers. It included lighting in-dustry experts and research personnel with the purpose of drivingproduct requirements to satisfy customer expectations and encourage theuse of energy saving and sustainable solid state lighting products. Thiseffort resulted in a set of eligibility requirements for Solid State Lighting(LED luminaires) for ENERGY STAR® qualification. The requirements aresubstantially different from the current ENERGY STAR® program used incompact fluorescent. The core differences include color quality, light de-livered by the luminaire, power quality and reliability of the total luminaire. Five key qualification requirements form the foundation of the ENERGYSTAR® Standards - qualifications that the Halo Recessed LED has metand exceeded.

1. TESTING: Requires submission of qualified independent test lab datato obtain qualification. Halo LED complies with ENERGY STAR® SSLtest standards including IES LM-79-2008 and LM-80-2008 as per-formed by an independent test lab.

2. EFFICACY: The luminaire test data and submitted report must demon-strate a minimum of 35 lumens per watt and 575 lumens for the leastefficient LED, lowest efficient optic, and hottest luminaire configura-tion for the product group submitted for qualification.

3. COLOR: LED luminaire must demonstrate color uniformity across theaperture. For example, color of 3000K recessed LED (Like the HaloLED) must fall between 3045K±175K, and the color maintenancemust be within 0.007 (u’,v’) over the lifetime, and color range must fallwithin 7-Step Quadrangle.

4. POWER: The driver/power supply must have a power factor of >0.70and >0.90 for residential and non-residential respectively, meet FCCrequirements, sound rating of A and provide transient protection.

5. RELIABILITY: The LED luminaire must demonstrate 70% lumen main-tenance at 25,000 hours and 35,000 hours for residential and non-residential respectively, as calculated using the DOE’s linearextrapolation model. The LED luminaire must include a 3-year writtenwarranty provided with the product.

There are many more details to the solid state lighting standards that canbe found at the ENERGY STAR® website, www.energystar.gov.

Knowing that consumer confidence is very important to adopt LED energysaving luminaires, it is important early on to establish a set of require-ments to meet customer expectations. ENERGY STAR® for solid statelighting is the standard for high quality and reliable LED recessed down-lighting. Rest assured that Cooper Lighting along with the lighting industryand DOE are working hard to provide standards that encourage lightingproducts that reliably save energy and reduce our consumption of naturalresources.

HALO LED means superior performancewith ENERGY STAR® Qualifications.

HALO®

The school district of Delta, British Columbia wanted to save onboth energy and maintenance costs. Their school theater, in con-junction with BC Hydro, commissioned the project to to replace72 – 200W incandescent luminaires with 72 – Halo LED’s operat-ing at less than 15W. This was a one-to-one retrofit that savedthe school district 93% on energy cost. The maintenance sched-ule on these luminaires had been a group relamp carried outtwice a year. The Halo LED delivered significant value by eliminat-ing the maintenance cost and reducing the risk to personnel andproperty associated with the re-lamping of this installation with itshigh vaulted ceilings. Halo LED delivers a product that is esti-mated to deliver over 70% of its initial lumens for over 16 years(based upon the school’s energy and maintenance costs).

The payback on this retrofit was 2.4 years including material,labor, energy savings and a rebate of $60 per luminaire from BC Hydro.

The pictures illustrate a spectacular lighting design providing adownlight architectural appeal while delivering even illumination.

Another Halo

HALO LED Case Study

Project:North Delta Secondary,Theatre House LightsDelta School DistrictDelta, BC Canada

4 HALO®

HALO LED means superior performance with ENERGY STAR® Qualifications.

Revolutionary Lighting Technology

An LED (Light Emitting Diode) also referred to as Solid State Lighting (SSL) iscomposed of various semiconductor materials and when an electrical currentpasses through the diode, the recombination of positive and negativecharges results in the emission of photons or light. Environmental and legislative awareness continues to drive demand for en-ergy efficient lighting solutions in all types of cases. LED luminaires are high-efficiency alternatives to less efficient light sources, such as fluorescent andincandescent. The Halo LED Module was the first solid state lighting deviceto qualify for the ENERGY STAR® rating. This rating guarantees that the HaloLED Module delivers effective lighting while also meeting very demandingand stringent energy efficient operating guidelines. Halo LED also meets therequirements of California Title 24 and International Energy ConservationCode for High Efficacy luminaires.

Consumes 75% less energy compared to 65W BR30

incandescent lamp

For use in new construction orexisting applications

Uses less than 14 watts

Delivers greater than 650lumens

Warm color temperature (3,000Kwith CRI over 80)

Greater than 45 lumens per watt

Dimmable to 5%

Superior light quality

Virtually maintenance freeyielding sustainable performance

Three year limited warranty

HALO LED

Halo LED package is an engineeredconglomeration of multiple LED’s.This compact LED package createsone virtual source of light.

5HALO®

HALO LED provides the ultimate value in sustainable recessed lighting systems.

Long LifeLED’s are solid state devicesthat do not have filaments orglass components that couldbreak. The light source is notsusceptible to vibration thusreducing the risk of prematurefailure. The Halo LED designdelivers over 70% of the initiallight output long after 50,000hours of operation. The sustain-ability of the Halo LED fixturedramatically reduces mainte-nance and service costs overtraditional sources.

Incandescent = 0.46 years life (50% of lamps fail at 1,000 hours)

LIFE COMPARISONS1 - Incandescent, Fluorescent, Halo LED

Fluorescent = 5.5 years life (50% of lamps fail at 12,000 hours)

LED = 22.8 years and still producing 70% of initial lumen output(1) 2,190 hours/year (6 hours per day)

Compliance• UL/cUL 1598 listed luminaire• State of California Title 24 - 2008 High

Efficacy Compliant• International Energy

Conservation Code (IECC) - 2009 High Efficacy Compliant

• Washington State Energy Code - AIR-TITE™

• New York State Energy Conservation ConstructionCode - AIR-TITE™

• AIR-TITE™ Certified under ASTM-E283• RoHS compliant luminaire

Energy SavingChanging one incandescent lamp toa Halo LED recessed downlight willsave you hundreds of dollars over thelife of the fixture. Changing multiplefixtures will significantly lower yourelectric bill and change how you viewlighting. The Halo LED luminaire ismore efficient than traditional lightsources consuming 75% less energythan a 65 watt incandescent lamp.

SustainabilityHalo LED is a part of Cooper Lighting’s SustainabLEDesign™

initiative that offers environmental and and sustainable solutions that reduce carbon emissions and hazardous materials in support of overall strategy to improve the environment.

6 HALO®

HALO LED contributes to lower environmental impact.

Reduces the Environmental Impact

The supplies of fossil fuels are diminishing due to high demand for energy.Since lighting constitutes a large percentage of electric generation capacity, ithas become a target for higher mandated efficiency standards. Changes in thelighting industry are driven by both energy legislation and by consumers whoare concerned with excessive consumption.The future of lighting is with high efficiency products that meet lower energyconsumption levels while not using hazardous materials like mercury and leadthat can damage the environment.

Halo LED luminaires not only

reduce your energy cost but they

also benefit the environment.

By lowering the demand for

electricity, power plants can

generate less energy and lower

the amount of carbon emissions

discharged into the environment.

HALO LED Environmental Benefits

7HALO®

HALO LED helps reduce carbon emissions .

LED lighting provides a way to reduce the energy de-mands of lighting in homes and commercial facilities.Lighting energy consumption cost has been estimated tobe as high as 40% in certain commercial facilities. TheHalo LED High Efficacy recessed downlight reduces en-ergy demand thereby reducing carbon emissions whichare a primary cause of the “green house effect” leading toglobal warming.

The Halo LED luminaire is more efficientthan traditional light sources consuming75% less energy than a 65 watt incandes-cent lamp while delivering more light. HaloLED offers additional savings when dimmingalong with user control of the lighted envi-ronments.

LED lighting helps conserve the planet’s resources while help-ing to achieve significant energy cost savings. Halo LED is mer-cury-free, PCB-free and lead-free and thus does not needspecial handling to dispose of properly. This downlight solutionreduces carbon emissions and conserves natural resourceswhile diminishing the concerns of toxic substances in the watersupply resulting from improper disposal. Halo provides solu-tions with LED’s that make it easy to be environmentally re-sponsible.

Traditional incandescent technology only provides 10%light and the remaining 90% energy is heat that adds thermal load to an air conditioning system. Halo LEDsaves additional energy by reducing cooling demandcaused by older lighting technologies. In warmer cli-mates, the load of incandescent lamps on the HVACsystem can be as much as 400% greater than a com-parable LED. So with Halo LED, significant reduction inair conditioning load can result in lower energy cost in-cluding lowered peak demand charges.

8 HALO®

HALO LED reduces operational cost in the Hospitality Industry

Lobbies and More

The Halo LED downlight is a perfect choice for the hospitality industry due tothe sustained light levels provided by the LED integration. The Halo LED pro-vides lower operating costs per fixture and the difference can be significantwith a large number of fixtures utilized in an installation. Since there is limitedinfrared and no ultraviolet emissions, artwork and wall hangings are protectedfrom fading. The basic “downlight” look and operation of the Halo LED allowsit to easily blend in with other fixtures so it does its job without calling undueattention to itself.

Halo LED luminaires are ideal for

creating virtually maintenance-

free public spaces. Hotels, restau-

rants and night-time businesses

will reduce expensive electric bills

and maintenance costs by choos-

ing the Halo LED.

Halo LED will continue to deliver

70% of the original light after

eleven years based on 12 hours

usage per day.

Sustainable Lighting for Hospitality

9HALO®

Operational costs can be dramatically reduced with Halo LED lighting. When

lighting is operated 24/7, the burn hoursof traditional light sources increase the

total energy load and frequency oflamp replacement.

Since the Halo LED does not emit heat like tradi-tional incandescent or fluorescent sources, even alarge installation will not put a significant strain onthe air conditioning system. This is another benefitfrom Halo LED.

Halo LED can help improve customersatisfaction. Most recent reports indicate thenumber one complaint of customers stayingin hotels is the lighting does not work. This isdue to the high mortality rates of incandes-cent and compact fluorescent lamps. Evenunder harsh demands of 24/7 operation, theHalo LED module will continue to deliver 70%of the original light after six years. That’s sixyears of no unsightly maintenance operationsdisturbing your customers.

10 HALO®

Add the comfort and benefits of LED Lighting to the healthcare environment.Add the comfort and benefits of LED Lighting to the healthcare environment.

Benefits for the Healthcare Patient

The principal characteristics of LED lighting make it a natural for health careinstallations. Besides the low energy consumption and resulting cost savings,Halo LED’s sustainable operation virtually eliminates maintenance issues.Halo LED is also friendly to the room occupants with its pleasing color, lowbrightness and low glare. In addition, the Solite® Lensed White Baffle Trim(493WBS06) features an antimicrobial paint finish that actively kills bacteriawhich is a major healthcare concern.

Cooper Lighting’s LED’s are

ideal for creating low

maintenance public spaces,

patient rooms and recovery

rooms. Energy efficient fixtures

reduce energy consumption and

LED’s sustainable operation

reduces maintenance costs.

A warm white color temperature

creates a familiar home-like envi-

ronment.

Maintenance free for Healthcare

11HALO®

Waiting rooms provide another application for Halo LED. Operating 24hours a day, the Halo LED will still beoperating after six years of continuouslighting with over 70% of its originallumens. When compared to traditionalsources, maintenance personnel willappreciate the time savings offered byHalo LED in spot lamping and disinfecting.

As an added benefit, especially in healthcareenvironments, the Halo LED Solite® LensedWhite Baffle Trim (493WBS06) features anantimicrobial paint finish that actively killsbacteria. The Solite® Lens offers wet locationand shower rating and the added benefit of asmooth lens surface for ease in generalwipe-down cleaning.

The advanced dimming range of the Halo LED provides patient control of their desired light levels.Halo LED works with standard line voltage dimmers.Dimming range is 100% to less than 15% and lessthan 5% on select dimmers that have a low-end(minimum brightness) adjustment (see DimmingNotes, page 32).

12 HALO®

HALO LED means versatile, high quality lighting for commercial spaces

Halo LED helps you through the workday

Effective lighting is one of the keys to feeling good and productive aboutwhere you work and what you do. HALO LED delivers low glare, light outputand distribution comparable to a 65 watt BR30 incandescent lamp or an 18watt compact fluorescent luminaire. It provides excellent color rendering; awarm white color temperature, and can deliver over 650 productive beam lumens from the luminaire. The superior optical design also yields beam cut-offand low-glare. The Halo luminaire can be dimmed below 15% with most stan-dard dimmers and to 5% with select dimmers that have a low-end (minimumbrightness) adjustment. (See Dimming Notes on page 32 for additionaldimming application information). These qualities make Halo LED perfect formeeting rooms, private offices, reception desks, service counters, rest rooms,break rooms and more.

Focus on the importance of light-

ing. Halo LED luminaires provide

light output that is comparable to

traditional sources while saving

energy and eliminating the

inconvenience and distraction

of frequent maintenance.

Quality Lighting for Commercial Spaces

13HALO®

LED lighting in the office provides effective illuminationwhile lowering energy costs. Dimming capability on LED’sallow rooms to be set for presentations at the push of a button.

Any workplace can benefit from the mainadvantages of Halo LED lighting: Low energyconsumption, reduced energy cost, lowmaintenance and dimmable, high qualityillumination. The dependable, lower overall costof the Halo LED allows the business to focus onsatisfying customers and raising the bottom line.

A commercial canopy or soffit lighting luminairethat operates at less than 14 watts has not beenavailable until now. The Halo LED is rated forcontinuous operation in non-insulated spaceswith temperatures from -22°F (-30°C) to +104°F(+40°C) when used with non-IC housings suchas Halo H750T or H7T series housings. The HaloLED 14W system offers a range of operation andextended life-time for both energy and mainte-nance savings in canopy applications. Halo LEDstandard dimming feature allows for interfacewith building management controls that furtherincrease both energy and maintenance savings.

14 HALO®

HALO LED means reduced maintenance and more time for selling.

Halo LED is a Natural for Retail

The Halo LED downlight is an ideal choice for retail applications. It provideshigh performance lighting in almost any department. Halo LED presents themerchandise in the best light. The fact that Halo LED generates no ultravioletand limited infrared means that even the most sensitive colored merchandiseis protected from fading. The other characteristics of Halo LED such as lowwattage (14 watts) means that energy costs are reduced and that, even withlarge installations, energy conservation codes can be met. Finally, with 70%lumens operating at 50,000 hours, Halo LED virtually eliminates the mainte-nance cycle reducing maintenance cost in the retail space.

LED luminaires do not emit

damaging ultraviolet wavelengths

and limited infrared so garments

and fabrics can be illuminated

without color deterioration. Also,

LED’s generate much less heat

thereby significantly reducing the

load on air conditioning systems.

Unique benefits for Retailers

15HALO®

Colorful merchandise benefits with extra “eye-appeal” fromthe consistent lighting offered by Halo LED. Compared totraditional lamp sources, use of Halo LED means no more mis-matched lamps, no flickering as lamps approach end of life andfinally, no burned-out lamps for well beyond 50,000 hours ofoperation.

The benefits of no UV wavelength ofthe Halo LED greatly increases productand display life. Metal halide andfluorescent sources emit UV rays thatdeteriorate rich colors and require morefrequent maintenance of retail spaces.

With so much merchandise competing for attention and energy requirementsdriving higher efficiency standards, Halo LED provides superior illuminationalong with energy savings that meet code and makes people want to stopand take a closer look.

Traditional sources burn out frequently requiring maintenance personnelto replace lamps. Halo LED technology delivers over 70% of initial lumensover 50,000 hours. This means less unsightly distractions of on-goingmaintenance for replacing lamps that burn out frequently.

16 HALO®

HALO LED provides economy of operation, long life and dimming for the home.

Halo LED - Ideal for Residential Lighting

Halo LED is a natural for the home. The energy savings and cost reduction arewelcome anytime. Unlike some compact fluorescent fixtures, the appearanceof the LED module with a lensed trim is reminiscent of a familiar downlight witha PAR lamp. The Halo LED can be dimmed so the brightness level can be adjusted as the day’s activities change.

Quality optical design provides

light output and distribution

comparable to an incandescent

lamp source. Excellent cutoff,

color quality and a warm white

color temperature create an

enjoyable illuminated environment.

Full range dimming provides the

ability to set different moods.

HALO LED is a natural for the home

17HALO®

HALO LED recessed housings offerarchitectural and landscape accentlighting capability as installed inprotected soffits, porches, andcanopies. Halo LED is an excellentsolution for recessed lighting inthese non-insulated spaces as theLED can start and operate withtypical ambient outdoor tempera-tures found in both warm and coldclimates. Previously, soffit typelighting solutions have not beenpossible using energy-efficientlighting due to temperature limita-

tions- particularly in cold climates.Until now, the best solution avail-able for cold temperatures was in-candescent lighting. And Halo LEDwhen used in soffits helps reducethe amount of in-ground landscapelighting and the associated yarddamage that frequently occurs.The Halo LED module when usedwith non-IC housings such asH750T, H750TCP, H7T, H7RT,ET700, or ET700R provides an effective energy-efficient solutionfor soffits, porches and canopies.

Halo recessed LED looks like a familiar incandescent downlight.The Halo LED contains no mercury, lead or PCB’s and does nothave any special disposal requirements. One less thing for ahomeowner to be concerned with. This way the homeownercan focus on what matters most.

In the kitchen above with seven downlights the energy loadcould be reduced from 455 watts to just 98 watts with HaloLED fixtures. Now the homeowner can enjoy warm, high qualityillumination with full range dimming without the high costs. Additionally, these luminaires dramatically lower the impact onthe air conditioning system compared to inefficient incandes-cent and halogen lamps.

18 HALO®

HALO LED - as simple as 1, 2, 3

ML706830 Halo LED Module

The Halo LED system consists ofthree parts.

1 - Halo LED Module

2 - Choose from dedicated LED housings with 4 models for different ceiling applications

OR

Choose any 6” compatible aperture housing

3 - LED Trim completes the installation with a choice ofeleven different trims

HALO LED Basics

1

1 The HALO LED module provides light output and distribution comparable toa 65 watt BR30 incandescent lamp or an 18 watt compact fluorescent lumi-naire. It provides excellent color rendering; a warm white color temperature,and can produce over 650 productive beam lumens out of the luminaire.The LED package provides a foundation for superior optical design of trimsthat yield 50° cutoff and low-glare. The Halo LED module can be dimmed to15% with most standard dimmers and is capable of dimming to 5% withselect dimmers that have a low-end (minimum brightness) adjustment (referto Dimmer Notes page 32 for additional dimming application information).

Edison Base Adapter

Halo LED module includes an Edison Base adapter so the LED module maybe retrofitted in most standard housings as well as dedicated LED housings.

19HALO®

Heat sink features durable die-cast aluminumconstruction that conducts heat away from theLED package keeping LED junction tempera-tures at a specified level to ensure extendedlife well over 50,000 hours even in insulatedceilings.

Dedicated LED connector is a UL and CSAlisted luminaire disconnect (non-screw base)for easy installation and compliance with Title24 as well as rebate programs

LED driver (power supply) designed forhigh efficiency and long life in operatingthe LED package for well over 50,000hours.

Torsion springs for secure retention in thehousing holding trim tightly against the ceiling.

LED package consists of an engineeredconglomeration of multiple LED’s.The compact LED package creates onevirtual source of light for a productive“cone of light.”

H750ICAT HousingAIR-TITE housing for Insulated Ceilings. Canbe covered with insulation. Other housingsavailable for different ceiling applications.

2LED Housings

493WBS06One of several LED trims in the Halo LEDcollection, this Solite® lensed, white die-cast trim and ring has anti-microbial paintfinish standard. Choose from selection of 11Halo LED trims in different styles and fin-ishes.

LED Trims3

May also be used in existinginstallations of the following Halo and All-Pro housings:

H7ICAT, H7ICATNB, H7ICT, H7ICTNB, H7RICAT, H7RT,H7T, H7TNB, EI700AT, EI700NB, EI700ATNB, EI700RAT, EI700, ET700,EI700R, ET700R.

Existing Housings - Retrofit

May also be used for retrofit in existing in-stallations of other 6" compatible aperturehousings (see pages 24 and 25 for retrofitinformation).

Dimensions

6-1/2”[165mm]

5-3/4”[146mm]

20 HALO®

HALO LED Module - New Lighting Technology for the 21st Century.

Halo LED Module Features

• Exceeds light output and distribu-tion of a 65 watt BR30 incandes-cent lamp or an 18 watt compactfluorescent luminaire while consum-ing less than 14 watts of electricity.

• Exceeds high efficacy requirementsfor California Title 24 - 2008 and IECC-2009

• Can be dimmed below 15% withmost standard dimmers and is ca-pable of dimming to below 5% withselect dimmers that have a low-end(minimum brightness) adjustment.

• Excellent color rendering (80 CRI)and warm white color temperature (3045K).

• Emits no ultraviolet and only mini-mal infrared wavelengths known to

damage fabrics and merchandise.• Does not emit heat like traditional

light sources.• No mercury is present eliminating

special recycling requirements.• Patent pending optical design pro-

vides 50° cutoff and low glare.• Product is constructed for 50,000

hours at 70% lumen maintenance(over 22 years based on 6 hours ofuse per day).

• Multiple trim and reflector options. • High efficiency driver: power factor of

>.90 at an input power of 120V, 60Hz.• Cooper Lighting provides a 3 year

warranty on the Halo LED Module.

The Halo LED module is designed for

new construction with LED dedicated

housings (H750x Series)

OR

for use in existing HALO or ALL-PRO

housings (H7x and E700x Series)

ORfor retrofit in existing 6” compatible

aperture housings. The Halo LED

can deliver over 650 lumens with a

superior optical design that yields

productive beam lumens, good cutoff

and low glare. The Halo LED module

meets the stringent standards of

ENERGY STAR® SSL as well as

the high efficacy requirements of

California Title 24 - 2008 and the

International Energy Conservation

Code (IECC).

HALO LED

T242008California Title 24

Compliant

IECC


Conservation Code

Code Compliant

21HALO®

Halo LED deploys InGaN (Indium GalliumNitride) semiconductor material which has ab-sence of UV and has minimal IR wavelengths.The unique engineered conglomeration ofdiodes covered with a uniform phosphor coat-ing provides for consistent color uniformityand tight color control even during dimming,exceeding the ANSI C78.377-2008 CCTranges. The specified 80CRI of Halo LEDexceeds ENERGY STAR® SSL requirementsproviding high quality color rendering.

C.I.E. (CommissionInternationale de l’E-clairage, The Interna-tional Commission onColor). The C.I.E. dia-gram is based on theproposition that mixingvarying proportions ofthree hypothetical pri-maries (not necessarilyred, green, and blue) cancreate the sensation inthe human observer ofany color of light. Thethree “primary” colorsare dubbed”X”, “Y” and“Z”. If we are merelyconcerned about colorand not about bright-ness, we can specifyjust the relativestrengths of these threecolors, denoted by x, yand z. Since x+y+z mustadd up to 1 (ie 100%) just providing x and y is sufficient to specify lamp color with z im-plied. Lamp color can then be represented on a two dimensional plot of x and y. All pos-sible colors then fall under a “guitar pick” shaped triangle in which the perimeterencompasses spectrally pure colors (seen in nature only in rainbows and prisms) rang-ing from red to blue. Moving toward the center “dilutes” the color until it ultimately be-comes white. The color coordinates traversed by an incandescent object as itstemperature is raised are plotted on the C.I.E. Chromaticity Diagram as the “Blackbody”curve and occupies the central white region. Two lamps whose x, y coordinates fall oneabove the blackbody and one below could have the same CCT. However the one abovewill appear slightly greener, and the one below slightly pinker. This is why two lampshaving the same color temperature can still show differences in color as seen by thehuman eye. This is why the Halo LED has very stringent color specifications, testing,and production controls to ensure consistent color uniformity. Halo LED complies withENERGY STAR® SSL test standards including IES LM-79-2008 and LM-80-2008 asperformed by an independent test lab.

Proper thermal management of a LED system is criticalfor high efficiency and long life. Halo LED’s patent pend-ing heat sink construction is designed for retrofit or newconstruction to yield 70% lumen maintenance after50,000 hours of operation with many thousands of hoursof operation thereafter. The Halo LED is tested to IESNALM-79 and LM-80 test standards for performance and reliability.

Efficient optical control isachieved through computeroptimized designs toachieve high luminaire effi-ciency. Halo LED’s patentpending optics balancesource brightness and per-formance to deliver a sys-tem that exceeds ENERGY STAR® SSL strin-gent requirements for lumi-naire efficacy and absolutelumen delivery from the luminaire.

Halo LEDML706830

20

10

700nm400nm300nm

UVAUVB IR

0

Sp

ectr

al F

lux

(mW

/nm

)

22 HALO®

HALO LED housings - a housing for every need.

Housing Features

The Halo LED fixture is designed to exceed the highest energy efficiency codes andstandards in the industry.

Halo LED H750 collection is in compliance with UL/cUL 1598 Luminaire standards. ThisUL listing is significant in that the UL compliance covers the Halo LED module, trimsand housings. The Halo LED module is designed to operate in the demanding thermalenvironment of IC rated housings for direct contact with insulation. The dedicated LEDhousings ( H750ICAT and H750RICAT) meet California Title 24 standards, and alsomeets Restricted Air Flow Standard ASTM-E283. In addition, the H750T and H750TCPhousings are UL/cUL listed for use with the H277 and H347 step down transformersfor 277V and 347V installations respectively (see page 32 for H277 and H347 applicationnotes).

Halo makes several styles of

housings available for LED

applications. Choose the right

housing for either insulated

ceilings, remodel applications,

non-insulated ceilings and even

Chicago Plenum Rated

installations.

Dedicated HALO LED Housings

Non-Screw base dedicatedLED connector

23HALO®

H750ICATAIR-TITE Housing for Insulated Ceilings• 6" Aperture New Construction Housing • For Use With Halo 6" LED Modules• California Title 24 - 2008 Compliant• For Insulated Ceilings - May Be Covered with

air-permeable Insulation• Meets Restricted Air Flow Requirements per

ASTM-E283• LED connector is a UL and CSA Listed

Luminaire Disconnect for easy installation• Input 120V Line Voltage

• UL/cUL 1598 Listed Luminaire

H750RICATAIR-TITE Remodel housing for Insulated Ceilings• 6" Aperture Remodel Housing• Installs from below the ceiling• For Use With Halo 6" LED Modules• California Title 24 - 2008 Compliant• For Insulated Ceilings - May be

Covered with air-permeable Insulation• Meets Restricted Air Flow Require-

ments per ASTM-E283• LED connector is a UL and CSA Listed

Luminaire Disconnect for easy installation

• Input 120V Line Voltage• UL/cUL 1598 Listed Luminaire

H750THousing for Non-Insulated Ceilings • 6" Aperture New Construction Housing• For Use With Halo 6" LED Modules• California Title 24 - 2008 Compliant• LED connector is a UL and CSA Listed Luminaire

Disconnect for easy installation• Input 120V Line Voltage• UL/cUL Listed 1598 luminaire• UL/cUL Listed for use with H277 and H347 step

down transformers in 277V and 347V installations.

• Housing becomes AIR-TITE when used with theHalo LED module

H750TCPHousing for Chicago Plenum CeilingMay be used in new construction or remodel.

• 6" Aperture Housing• For Use With Halo 6" LED Modules• “Boat-shaped” plaster frame allows use as a

remodel housing in existing ceilings. (Simply remove bar hangers)

• LED connector is a UL and CSA Listed Luminaire Disconnect for easy installation

• UL/cUL Listed 1598 luminaire• Input 120V Line Voltage• UL/cUL Listed for use with H277 and H347 step

down transformers in 277V and 347V installations.

• Housing becomes air-tite when used with the Halo LED module

The H750ICAT and H750T fea-ture the GOT NAIL!™ hangerbars with a preinstalled readyto use nail that easily pene-trates regular lumber as well asengineered lumber, I-joists,and laminated veneer beams. The nail is regressed to preventsnagging and to ensurestraight penetration. Pass-N-Thru™ bar hanger feature al-lows for tool-free shortening ofbars without removing themfrom the frame.

Make wiring connections out-side the junction box (with easyaccess to feed wires and hous-ing wires) then slide the cableinto the wire trap for a secureconnection. The Slide-N-SideIII™ wire trap accepts the mostpopular sizes of non-metallicsheathed cable.

24 HALO®

HALO LED New Construction or Retrofit

Installation Features

Whether you are building new construction or have an existing space with re-cessed housings already installed, you can start saving money and energy byswitching to LED lighting. For new construction, use a dedicated Halo LEDhousing that is already wired to accept the Halo LED module. For existinghousings, the LED modules can be easily installed with the Edison BaseAdapter (included) - no special tools or rewiring needed. The Halo LED Module is designed to fit into dedicated LED housings, existingHalo or All-Pro housings, or other existing 6” compatible aperture housings. Ifused in recessed housings other than Halo or All-Pro the Cooper Lighting 3-year warranty applies to the LED Module and Trim only. As with any electrical installation, a qualified electrician must ensure compatibility of use with a partic-ular housing; this includes all applicable national and local electrical and building codes. Installer is re-sponsible to properly retain the LED Module and Trim in a housing at time of installation. Consult www.cooperlighting.com for the latest housing compatibility information.

Halo makes it easy to install LED

recessed lighting.

The Halo LED module is universally

designed for new construction or

retrofit into existing recessed

housings. Reap the benefits of

energy savings, long life, dimming

all of which improves the

environment. Start today!

HALO LED - New Construction or Retrofit Existing Installations

25HALO®

Install H750x series LED housingin ceiling joists and make wiringconnections.

Connect LED module with housingwiring.

Install LED Module with trim inLED housing.

3

2

1

New Construction

Easy Installation in New Construction

Retrofit

Remove trim (and socket plate ifpresent) from existing housing.

Install Edison base adapter intorecessed housing socket.

Plug Edison base adapter cable’sconnector onto LED module con-nector. Clip socket onto LED modulebracket.

Install LED module with trim inexisting housing.

1

2

3

4

Edison base Screw-in adapter (included with

module)

Retrofit Made Simple

LED dedicated Halo HousingCompliant to T24 and required for many

rebate programs. (T24-2008)

LED Module

LED Trim

LED Module

LED Trim

T242008


Compliant

Housing must accommodate torsion springs and providespace for the module to fit.

(Consult www.cooperlighting.com for the latest housingcompatibility information.)

IECC


Conservation Code

Code Compliant

26 HALO®

HALO LED Trims - A trim for every need

Trim Features

• Die-cast baffles, die-cast trim rings and aluminum reflectors• Standard trim ring height of .160" at OD and .180" at ID• Standard trim ring provides clearance for remodeler flange and gasket for

AIR-TITE™ seal• Accessory trim rings in designer finishes - mix and match with baffles and

reflectors• Solite® lensed white baffle model with ANTIMICROBIAL paint finish• Performance optics with 50° cut-off.

Multiple baffle and reflector

options allow the Halo LED

recessed luminaire to be used in

many interior spaces. Choose the

best reflector finish and trim for

the interior space. Matching

metallic finish accessory trim

rings can be used to create a bold

statement.

Wide Selection of HALO LED Trims

27HALO®

494SC06Specular Reflector, White Trim Ring

494P06White Reflector, White Trim Ring

494H06Haze Reflector, White Trim Ring

7-1/4"[184mm]

2-3/8"[60mm]

494WB06White Baffle, White Trim Ring

7-1/4"[184mm]

1-3/8"[35mm]

492PS06White Baffle with frosted regressed lens, white trim ring

7-1/4"[184mm]

2-7/8"[73mm]

493SCS06Specular Reflector with Solite® regressed lens, white trim ring

7-1/4"[184mm]

2-3/8"[60mm]

7-1/4"[184mm]

2-3/8"[60mm]

7-1/4"[184mm]

2-3/8"[60mm]

IECC


Conservation Code

Code Compliant

T242008


Compliant

IECC


Conservation Code

Code Compliant

T242008


Compliant

IECC


Conservation Code

Code Compliant

T242008


Compliant

IECC


Conservation Code

Code Compliant

T242008


Compliant

IECC


Conservation Code

Code Compliant

T242008


Compliant

28 HALO®

HALO LED Trims - A trim for every need

7-1/4"[184mm]

2-7/8"[73mm]]

493SNS06Satin Nickel Reflector with Solite® regressed lens, SatinNickel trim ring

7-1/4"[184mm]

2-7/8"[73mm]

493TBZS06Tuscan Bronze Reflector with Solite® regressed lens, TuscanBronze trim ring

7-1/4"[184mm]

2-7/8"[73mm]]

493BBS06Black Baffle with Solite® regressed lens, white trim ring TRM490

Thin Profile Trim Ring (optional accessory)• Die-cast trim ring• Thin trim ring provides a more

subtle ceiling appearance• Purchase as accessory and recy-

cle ring supplied with trim• Available in

Satin Nickel (TRM490SN) Tuscan Bronze (TRM490TBZ)Black (TRM490BK) Polished Chrome (TRM490PC)White (TRM490W)

• Trim ring height of .120" at OD and.180" at ID

7-1/4"[184mm]

2-7/8"[73mm]

493HS06Haze Reflector with Solite® regressed lens, white trim ring

493WBS06White Baffle with Solite® regressed lens, white trim ring

7-1/4"[184mm]

2-7/8"[73mm]

ANTI-MICROBIAL finish

IECC


Conservation Code

Code Compliant

T242008


CompliantIECC


Conservation Code

Code Compliant

T242008


Compliant

29HALO®

Economic Analysis

NOTES:(1) Rated life of an LED system represents only a

30% depreciation in light output without acomplete system failure

(2) Rated life of traditional sources are defined asthe time in which 50 lamps out of 100 fail.

(3) Order a different system to obtain dimmingfeature.

(4) Lamp replacements are based upon predictedmortality curves published by major lampmanufacturers.

(5) Lamp cost of an LED system is zero for 3 yearevaluation. The replacement module is ex-pected to occur when the owner is dissatisfiedwith the light levels well beyond 50,000 hoursof operation.

(6) LED luminaires are measured in total deliveredlumens using absolute photometry. Thismeans there is no differentiation for measuredvalues between the sources and luminaire.Therefore, a LED luminaire is considered 100%efficient in delivering total lumens.

(7) Restricted to housings that do not include amedium base socket (E26)

LED Incandescent

LED Incandescent

Compact Fluorescent

New Construction Review Open White Baffle Trim CategoryLuminaire Summary

H750ICAT H7ICAT H7ICAT H271ICAT H272ICAT494WB06 310W 310W 406WWB 406WWB

ML706830 65W BR30 75W BR30 18W DTT 26W DTTLight Source ML706830 65W BR30 75W BR30 18W DTT 26W DTTColor Temp 3000°K 2800°K 2800°K 3000°K 3000°KCRI 80 100 100 82 82Input Power 13.6 65 75 22 28Rated Life 50,0001 2,0002 2,5002 10,0002 10,0002

Source Lumens NA6 755 900 1150 1710Luminaire Efficiency NA6 78% 78% 56% 55%Delivered Lumens 644 589 702 644 941Dimming Standard Standard Standard (3) (3)

ComplianceENERGY STAR® Qualified No No Qualified QualifiedCalifornia Title 24-2008 Meets No No Meets MeetsIECC-2009 High-Efficiency Meets No No Meets MeetsApplication SummaryRoom (80/50/20) 21x21x8 21x21x8 21x21x8 21x21x8 21x21x8Target Light Levels (fc) 17 13 15 15 13Light Loss Factor (LLF) 0.846 0.900 0.900 0.765 0.765Quantity of Luminaires 16 12 12 12 9Power Density (W/sq. ft.) 0.54 1.77 1.53 0.80 0.57

Operation Cost SummaryYears of operation

12hrs/day - 365 days/yr 3 3 3 3 3Energy ($0.10/kWh) $286 $1,025 $1,183 $347 $331Lamps Replaced (4) 0 144 115 21 16Estimated Lamp Cost (5) $2.50 $2.50 $6.00 $6.00Maintenance - $360 $288 $126 $96Total Operational Cost $286 $1,385 $1,470 $473 $427

Retrofit Review Open White Baffle Trim CategoryLuminaire Summary

494WB06ML706830 White Baffle White Baffle White Baffle

Light Source ML706830 65W BR30 75W BR30 40W A19Color Temp 3000°K 2800°K 2800°K 2800°KCRI 80 100 100 100Input Power 13.6 65 75 40Rated Life 50,0001 2,0002 2,5002 1,5002

Source Lumens NA6 755 900 495Luminaire Efficiency NA6 78% 78% 75%Delivered Lumens 644 589 702 371Dimming Standard Standard Standard Standard

ComplianceENERGY STAR® Qualified No No NoCalifornia Title 24-2008 Meets[7] No No NoIECC-2009 High-Efficiency Meets No No NoApplication SummaryRoom (80/50/20) 21x21x8 21x21x8 21x21x8 21x21x8Target Light Levels (fc) 17 17 21 11Light Loss Factor (LLF) 0.846 0.900 0.900 0.900Quantity of Luminaires 16 16 16 16Power Density (W/sq. ft.) 0.54 2.36 2.72 1.45

Operation Cost SummaryYears of operation

12hrs/day - 365 days/yr 3 3 3 3Energy ($0.10/kWh) $286 $1,367 $1,577 $841Lamps Replaced (4) 0 154 123 205Estimated Lamp Cost (5) $2.50 $2.50 $2.50Maintenance - $385 $308 $513Total Operational Cost $286 $1,752 $1,884 $1,353

,

30 HALO®

Photometrics

Test No: A10067 Spacing Criteria: 1.3Unit LPW: 47.5

CONE OF LIGHT Distance to Initial Nadir BeamIlluminated Foot Dia.Plane Candles

5'5" 10 7.27'0" 6 9.18'0" 5 10.49'0" 4 11.7

10'0" 3 13.0

Housing: H750ICAT Module: ML706830 Trim: 494P06 White Reflector Lumens: 647

110

220

330

ZONAL LUMEN SUMMARYZone Lumens %Fixt0-30 238 36.70-40 397 61.40-60 592 91.50-90 647 100.0

Test No: A10072 Spacing Criteria: 0.8Unit LPW: 45.3LPW: 47.7


5'5" 12 7.67'0" 7 9.78'0" 6 11.19'0" 4 12.5

10'0" 4 13.9

20

40

60




5'5" 11 6.97'0" 7 8.88'0" 5 10.19'0" 4 11.4

10'0" 3 12.6

120

240

360




5'5" 10 7.07'0" 6 9.08'0" 5 10.29'0" 4 11.5

10'0" 3 12.8

110

220

330




5'5" 8 6.67'0" 5 8.48'0" 4 9.69'0" 3 10.8

10'0" 2 12.0

80

160

240


IC Housing Tests



5'5" 17 3.87'0" 10 4.88'0" 8 5.59'0" 6 6.2

10'0" 5 6.9

170

340

510


Non-IC Housing Tests



5'5" 10 7.17'0" 6 9.18'0" 5 10.49'0" 4 11.7

10'0" 3 13.0

110

220

330




5'5" 8 6.67'0" 5 8.48'0" 4 9.69'0" 3 10.8

10'0" 2 12.0

80

160

240


Test No: A10084Spacing Criteria: 1.3Unit LPW: 49.7


5'5" 12 7.67'0" 8 9.78'0" 6 11.19'0" 5 12.5

10'0" 4 13.8

130

260

390




5'5" 12 7.07'0" 7 8.98'0" 6 10.19'0" 4 11.4

10'0" 4 12.6

120

240

360




5'5" 11 7.07'0" 7 8.88'0" 5 10.19'0" 4 11.4

10'0" 3 12.6

110

220

330




5'5" 18 3.77'0" 11 4.78'0" 8 5.49'0" 7 6.0

10'0" 5 6.7

170

340

510


Housing: H750T Module: ML706830 Trim: 494P06 White Reflector Lumens: 659

Housing: H750ICAT Module: ML706830 Trim: 494SC06 Specular Reflector Lumens: 667

Housing: H750ICAT Module: ML706830 Trim: 494H06 Haze Reflector Lumens: 623

Housing: H750ICAT Module: ML706830 Trim: 494WB06 White Baffle Lumens: 644

Housing: H750ICAT Module: ML706830 Trim: 492PS06 Lensed White Baffle Lumens: 458

Housing: H750ICAT Module: ML706830 Trim: 493WBS06 White Baffle, Solite Glass Lens Lumens: 593

Housing: H750T Module: ML706830 Trim: 494SC06 Specular Reflector Lumens: 677

Housing: H750T Module: ML706830 Trim: 494H06 Haze Reflector Lumens: 653

Housing: H750T Module: ML706830 Trim: 494WB06 White Baffle Lumens: 652

Housing: H750T Module: ML706830Trim: 492PS06 Lensed White Baffle Lumens: 466

Housing: H750T Module: ML706830Trim: 493WBS06 White Baffle, Solite Glass Lens Lumens: 603

31HALO®

Photometrics

IC Housing Tests Non-IC Housing Tests



5'5" 17 4.57'0" 11 5.88'0" 8 6.69'0" 7 7.4

10'0" 5 8.2

Housing: H750ICAT Module: ML706830 Trim: 493SCS06 Specular Reflector, Solite Glass Lens Lumens: 586

180

360

540




5'5" 18 4.27'0" 11 5.38'0" 8 6.19'0" 7 6.8

10'0" 5 7.6

180

360

540




5'5" 16 4.07'0" 10 5.18'0" 8 5.89'0" 6 6.5

10'0" 5 7.3


170

340

510



5'5" 15 4.27'0" 9 5.38'0" 7 6.19'0" 6 6.9

10'0" 5 7.6

Housing: H750ICAT Module: ML706830 Trim: 493TBZS06 Tuscan Bronze Reflector, Solite Glass LensLumens: 464

160

320

480




5'5" 16 3.87'0" 10 4.88'0" 8 5.59'0" 6 6.2

10'0" 5 6.9

Housing: H750ICAT Module: ML706830 Trim: 493BBS06 Black Baffle, Solite Glass Lens Lumens: 502

170

340

510


Housing: H750T Module: ML706830Trim: 493SNS06 Satin Nickel Reflector, Solite Glass Lens Lumens: 525


CONE OF LIGHT Distance to Initial Nadir BeamIlluminated Foot Dia,Plane Candles

5'5" 17 4.07'0" 10 5.08'0" 8 5.89'0" 6 6.5

10'0" 5 7.2

170

340

510




5'5" 16 4.17'0" 10 5.28'0" 8 6.09'0" 6 6.7

10'0" 5 7.4

160

320

480




5'5" 17 3.77'0" 10 4.78'0" 8 5.39'0" 6 6.0

10'0" 5 6.6

170

340

510


All tests were performed in accordance with LM-79-2008 and validatedthrough independent test lab verification using ISO9000 procedures



5'5" 18 4.67'0" 11 5.88'0" 9 6.69'0" 7 7.4

10'0" 5 8.3

180

360

540


Housing: H750ICAT Module: ML706830Trim: 493HS06 Haze Reflector, Solite Glass Lens Lumens: 583

Housing: H750T Module: ML706830Trim: 493SCS06 Specular Reflector, Solite Glass Lens Lumens: 547

Housing: H750T Module: ML706830 Trim: 493HS06 Haze Reflector, Solite Glass Lens Lumens: 593



5'5" 18 4.17'0" 11 5.28'0" 9 5.99'0" 7 6.6

10'0" 6 7.4

180

360

540


Housing: H750ICAT Module: ML706830 Trim: 493SNS06 Satin Nickel Reflector, Solite Glass Lens Lumens: 518

Housing: H750T Module: ML706830 Trim: 493TBZS06 Tuscan Bronze Reflector , Solite Glass Lens Lumens: 489

Housing: H750T Module: ML706830 Trim: 493BBS06 Black Baffle, Solite Glass Lens Lumens: 509

32 HALO®

Dimmer Notes for HALO LED and Transformers for 277V and 347V Installations

Dimmer Matrix Halo LED Module ML706830

LutronAriadni . . . . .AY/TG SeriesCeana . . . . .CN SeriesCenturion . .C SeriesDalia . . . . . .DL SeriesDiva . . . . . . .DV SeriesGlyder . . . . .GL SeriesLumea . . . . .LG Series

Lyneo . . . . . .LX SeriesNova . . . . . .N SeriesNova T . . . . .NT/NTB/NTA SeriesQoto . . . . . . .Q SeriesRotary . . . . .D SeriesSkylark . . . .S Series

LevitonIllumitech IPI/RPI.SeriesSureslide 663.Series

Trimatron 6681/6683/6602

Incandescent Analog Standard Dimmers with Circuit Loadof 4 LED Modules or More, Dimming to 15%

LutronDalia DLELV SeriesDiva DLELV SeriesFaedra FAELV Series

Lyneo LXELV SeriesMaestro MAELV SeriesNova NELV Series

Nova T NTELV SeriesSkylark SELV SeriesSpacer SPSELV SeriesVierti VTELV Series

LevitonAcenti ACE. Series (Electronic low voltage dimmer with low end programmable

trim from control panel for dimming to less than 5%) Illumitech IPE.Series (Electronic low voltage dimmer with low end manual trim behind

face plate for dimming to less than 5%)Vizia + VPE.Series (Electronic low voltage dimmer with low end programmable trim

from control panel for dimming to less than 5%)

Electronic Low Voltage Digital (also called Smart or Multi-Location)and Analog Dimmers, Minimum Circuit Load of One LED Module,Dimming to 15% Requires a neutral in the wall box

LevitonIllumitech IP10/IP40/IPM406/IPM10 Series dimmersAcenti ACI/ACE/ACX/ATI Series (Programmable trim)Vizia + VPI/VPE/VPX.Series (Programmable trim)

Incandescent Dimmers with Minimum Brightness Adjustment (LowEnd Trim), Circuit Load of 4 LED Modules or More, Dimming to 5% 1. Performance results may vary based upon dimmer model and manufacturer. 2. There are no

warranties of compatibility implied. 3. Refer to dimmer manufacturer for further details.

Cooper Wiring Devices

ASPIRE RF N/AASPIRE 9530, 9532, 9538, 9540Decorator Slide DI06P, DI10PDecorator Full-Slide SI061, SI06P, SI10PToggle 6441, 6443, 6453Rotary 6001, 6013, 6000, 6003, 6020, 6023Architectural Rotary RAI10, RAI15, RAI20

LutronAbella . . . . .AB SeriesFaedra . . . . .FA Series

Maestro . . .MA SeriesSpacer . . . . .SPS SeriesVareo . . . . . .V SeriesVierti . . . . . .VT Series

LevitonAcenti ACI. SeriesMural MDI/MSI.SeriesToggleTouchTGI.Series

TrueTouch 6606/TTI.SeriesVizia + VPI.Series

SPECIAL NOTE: Incandescent Digital Dimmers (also calledSmart or Multi-Location) require a 15W minimum incandes-cent load OR for circuit loads with LED modules only - useelectronic low voltage dimmers, (Refer to Electronic LowVoltage dimmer matrix) Dimming to 15%

Watt Stopper

Miro Universal DRD4 Series DimmersDCD267 Series DimmersDCD68 (series multilocation - When used with DRD4 or DCD267

series master dimmers

Cooper Wiring Devices

ASPIRE RF RF9534-N, RF9534 (no neutral), RF9536-N, RF9536 (no neutral)ASPIRE 9534, 9536Smart SM600, SM1000

Universal Wireless Dimmers ( Incandescent, Magnetic Low Voltage,Electronic Low Voltage), Minimum Circuit Load of Three LED Modules, Dimming to 15%

Watt Stopper

Miro Incandescent DRD2 Series DimmersDCD26 Series DimmersDCD68 (series multilocation - When used with DRD2 or

DCD26 series master dimmers

Incandescent Wireless Dimmers, Minimum Circuit Load of Six LEDModules, Dimming to 15%A 15W minimum incandescent load or a neutral in the wall box are recom-mended to reliably dim

H277 277V Step Down Transformer

H347 347V Step Down Transformer

Step Down TransformerH277=Transformer - Steps 277 line voltage down to 120V.

Attaches to knockout on junction box and is 300VA

rated (18 modules per transformer max.). H277 is a

UL Recognized Component that is listed for use

under the luminaire UL/cUL listing for use with

with non-IC housings (H750T, H750TCP, H7T, H7TNB,

H7RT) and LED Module.

Transformer Load - H277 (300VA)

1. H277 Transformer at full loading consumes a maximum

of 16W of power

2. When dimmer or switch is on the secondary (120V) side

of the transformer, power is consumed by the trans-

former with dimmer or switch in “OFF” mode at 6.5W

and in “ON” mode at 16W maximum with full loading.

3. When a dimmer or switch is on the primary (277V) side

of the transformer, power is consumed only in “ON”

mode to a maximum of 16W under full loading.

Step Down TransformerH347=Transformer - Steps 347V line voltage down to 120V.

Attaches to knockout on junction box and is 75VA

rated (4 modules per transformer max.). H347 is a

CSA/UL Listed Component that is listed for use

under the luminaire UL/cUL listing for use with

non-IC housings (H750T, H750TCP, H7T, H7TNB,

H7RT) and LED Module. (Note: 347V dimmers not

currently available)

Transformer Load - H347 (75VA)

1. H347 Transformer at full loading consumes a maximum

of 15W of power

2. When dimmer or switch is on the secondary (120V) side of

the transformer, power is consumed by the transformer

with dimmer or switch in “OFF” mode at 2.5W and in

“ON” mode at 15W maximum with full loading.

3. When a dimmer or switch is on the primary (347V) side

of the transformer, power is consumed only in “ON”

mode to a maximum of 15W under full loading.

H347

277V

(347V) 120V

HotTransformer

120V Incandescent or Electronic

Low Voltage Dimmer/Switch*

Hot

Neutral Neutral

LED LED LED

Ground

Transformer with Dimmer /Switch on Secondary

Dimmer Neutral Connectiononly with Electronic Low Voltage Dimmers

277V

(347V)

120V

HotHot

Transformer

277V Dimmer/Switch*

(Magnetic Low Voltage Dimmer Recommended)

NeutralNeutral

LED LED LED

Ground

Transformer with Dimmer /Switch on Primary * Dimmer/Switchmay be on thePrimary (277V)OR Secondary(120V) side of thetransformer.

33HALO®

Ordering Information/Warranty

3 YEAR PRODUCT LIMITED WARRANTYCooper Lighting (The Company) warrants theHALO ML706830 LED Module, HALO H750x Series housings and HALO LED trims against defects in material or workmanship for a period ofthree years from date of original purchase, andagrees to repair or, at the company's option, replace a defective product without charge for either replacement parts or labor during such time.This does not include labor to remove or install fix-tures. If used in recessed housings other thanHalo or ALL-Pro, the Cooper Lighting 3-year war-ranty applies to the LED Module and trim only.

This warranty is extended only to the original pur-chaser of the product. A purchasers receipt orother proof of date of original purchase accept-able to the Company is required before warrantyperformance shall be rendered.

This warranty only covers product failure due todefects in materials or workmanship which occursin normal use. It does not cover the failure of prod-uct caused by accident, misuse, abuse, lack ofreasonable care, alteration, or faulty installation,subjecting the product to any but the specified

electrical service or any other failure not resultingfrom defects in materials or workmanship. Dam-age to the product caused by separately pur-chased, non-Company supplied components andcorrosion or discoloration of components are notcovered by this warranty. There are no expresswarranties except as described above.

THE COMPANY SHALL NOT BE LIABLE FOR IN-CIDENTAL, SPECIAL OR CONSEQUENTIAL DAM-AGES RESULTING FROM THE USE OF THEPRODUCT OR ARISING OUT OF ANY BREACHOF THIS WARRANTY. ALL IMPLIED WAR-RANTIES, IF ANY, INCLUDING IMPLIED WAR-RANTS OF MERCHANTABILITY AND FITNESSFOR A PARTICULAR PURPOSE, ARE LIMITED INDURATION TO THE DURATION OF THIS EX-PRESS WARRANTY. Some states do not allowthe exclusion or limitation of incidental or conse-quential damages, or limitations on how long animplied warranty lasts, so the above exclusions orlimitations may not apply to you.

No other warranty, written or verbal, is authorizedby the Company. This warranty gives you specific

legal rights, and you may also have other rightswhich vary from state to state.

To obtain warranty service, please write to CooperLighting, 1121 Highway 74 South, Peachtree City,Georgia 30269. Enclose product model numberand problems you are experiencing, along withaddress and telephone number. You will then becontacted with a solution or a Return Goods Au-thorization number and full instructions for return-ing the product. All returned products must beaccompanied by a Return Goods AuthorizationNumber issued by the Company and must be re-turned freight prepaid. Any product received with-out a Return Goods Authorization Number fromthe Company will be refused.

Cooper Lighting is not responsible for merchan-dise damaged in transit. Repaired or replacedproducts shall be subject to the terms of this war-ranty and are inspected when packed. Evident orconcealed damage that is made in transit shouldbe reported at once to the carrier making the de-livery and a claim filed with them.

ORDERING INFORMATION - SAMPLE NUMBER: H750ICAT ML706830 493WBS06

Order housing, LED Module and trim separately

H750ICAT=6” DedicatedLED Insulated Ceil-ing, IC, AIR-TITE Housing

H750RICAT=6” DedicatedLED Insulated Ceil-ing, IC, AIR-TITE Remodel Housing

H750T=6” Dedicated LEDNon-IC Housing

H750TCP=6” ChicagoPlenum DedicatedLED Non-IC Housing

Housing Trim Options

494P06=Matte White Reflector/ white die cast trim

ring. Energy Star® SSL Qualified.

494WB06=White Baffle/ white die cast trim ring.

Energy Star® SSL Qualified.

494H06=Haze Reflector/ white die cast trim ring.


494SC06=Specular Reflector/ white die cast trim

ring. Energy Star® SSL Qualified.

492PS06=Regressed Lens, white die-cast baffle

and trim ring. Shower rated.

493WBS06=Solite® Regressed Lens, upper reflec-

tor, white die-cast baffle and die-cast white

trim ring with anti-microbial paint (standard).

Shower Rated and Energy Star® SSL Qualified.

493SCS06=Solite® Regressed Lens, upper reflec-

tor, Specular Clear die-cast lower reflector and

die-cast white trim ring. Shower Rated.


493HS06=Solite® Regressed Lens, upper reflector,

Haze die-cast lower reflector and die-cast

white trim ring. Shower Rated.


493SNS06=Solite® Regressed Lens, upper reflec-

tor, Satin Nickel die-cast lower reflector and

Satin Nickel die-cast trim ring. Shower Rated.

493TBZS06=Solite® Regressed Lens, upper reflec-

tor, Tuscan Bronze die-cast lower reflector and

Tuscan Bronze die-cast trim ring.

Shower Rated.

493BBS06=Solite® Regressed Lens, upper reflec-

tor, Black die-cast Baffle with die-cast white

trim ring. Shower Rated.

ML706 8 30

LED Module

ML706=6" LED

Module:

H7 Series,

600+ Lumens

8=80 CRI 30=3045K

Accessories

OT400P=Oversize White Metal Trim

Ring 6” ID x 9-1/4” OD

OT403P=Oversize White Plastic Trim

Ring 6” ID x 8” OD

H277=Transformer - Steps 277 line

voltage down to 120V

H347=Transformer - Steps 347 line

voltage down to 120V

Thin Profile Trim Rings:

TRM490WH=Thin Profile matte white

die-cast trim ring

TRM490SN=Thin Profile Satin Nickel

die-cast trim ring

TRM490TBZ=Thin Profile Tuscan Bronze

die-cast trim ring

TRM490BK=Thin Profile Black die-cast

trim ring

TRM490PC=Thin Profile Polished

Chrome die-cast trim ring

The chart is a graphic presentation showing what is necessary for countriesto maintain an acceptable standard of living while also living at a globallysustainable level. On a global scale it is critical to know whether humanity is living within thecarrying capacity of the planet – are humans living sustainably on planetEarth? The Ecological footprint measures human consumption in terms ofthe biologically productive land needed to provide the resources, and ab-sorb the wastes of the average global citizen. In 2008 it required 2.7 globalhectares per person, 30% more than the natural biological capacity of 2.1global hectares (assuming no provision for that needed for other organ-isms). The resulting ecological deficit must be met from unsustainablesources - use of stored resources including fossil fuels, and "mining" natu-ral resources including coal, forests and fisheries at greater than their rateof regeneration. The figure (top) indicates the sustainability of a range ofcountries in terms of the Ecological Footprint compared to the UN HumanDevelopment Index (a measure of standard of living). [1]The technology of Light Emitting Diodes (LED’s) offer future generations access to the natural resources we enjoy today to maintain our standard ofliving. SustainabLEDesign™, Cooper Lighting’s initiative demonstrating theimpact of sustainable LED luminaires, teaches lighting consumers bothmonetary and non-monetary effects when selecting LED solutions to solvelighting needs. Energy and maintenance are primary monetary values consumers can tan-gibly measure when selecting lighting products. Intangible metrics are theimpact of disposal and emissions of toxic materials that, when improperlydisposed, can leach into the natural water supply and emit greenhousegases that affect the earth’s climate.The HALO LED offers new solutions to save energy, extend maintenancecycles, and provide controls that dramatically create sustainable lightingdesigns. Join Cooper Lighting’s continued efforts to be environmentallyresponsible while offering consumers a financial return on their investment.[1] http://en.wikipedia.org/wiki/Sustainability

Human Welfare and Ecological Footprints

Sustainability: Meet the needs of the present generationwithout compromising the ability of future generations to meettheir own needs.

Ecological Footprint (global hectares per capita)

Hum

an D

evel

opm

ent I

ndex

SustainabLEDdesign™ - HALO LED• 75% less energy than a 65W BR30 incandescent lamp.• Provides 70% of initial lumens at 50,000 hours while over 35 incan-

descent lamps rated at 2,000 hours would have to be replaced in thesame time period.

• RoHS compliant meaning it does not contain mercury, lead or PCB’s• Reduces the following greenhouse gasses generated during

electricity production.- Carbon Dioxide (CO2)- Methane Gas (CH4)- Nitrous Oxide (N20) - Fluorinated gases such as hydrofluo-

rocarbon, Perfluorocarbon and Sulfur Hexafluoride (ozone -depleting substances - i.e. CFCs, HCFCs and halons).

HALO®

Halo LED Heat Sink Module• Aluminum heat sink• LED package consisting of aluminum, InGN

diodes, silicone, gold wire and phosphors• Copper wire with THHN insulation• Nylon and polycarbonate plastics

Driver• Potted electronics assembly

Housing• Considered a permanent part of the

installation and unlikely to be removed• Housings are a mix of steel and aluminum

parts

Trim• Trim ring and reflector are made of

aluminum• Glass lenses are used on some trims

Sustainability considers the impact on the environment during operation.The table below provides a relative indicator on the introduction of haz-ardous materials and greenhouse gases when various lighting systems areused. HALO LED lighting provides the lowest impact for the delivered lumens (around 650 lumens).

(1) Pounds per 50,000 hours per luminaire. (2) CO2 = Carbon dioxide (3) NO = NitrogenOxide (4) SO2 = Sulfur dioxide (5) % by weight (6) From solder connections

Sustainable solutions also evaluate the amount of natural resources consumed duringthe life cycle of the product. Halo LED is considerably better than the 65W BR30recessed downlight that delivers around 650 lumens.

The chart indicates the impact of these products to the overall consumption ofnatural resources. As shown, the Halo LED reduces the consumption of natural resources as compared to a 65W BR30.[Note that public research funding from independent researchers have been madeavailable with the goal to develop measurement systems that determine naturalresource consumption for various products. Prestigious universities are leading thiseffort. We should expect further refinement over time since this is a new field of study.]

Ope ration

D isposal

M fg

Waste

HALO LED (13.8W) 65W BR30 Incandescent

alu

alu

Glass Recycles

alu

RECYCLABLE STEEL

e

7OTHER

Sustainable products should demonstrate that they are eitherrecyclable, refurbishable or biodegradable. The materials usedshould not contain known hazardous material as identified byRoHS.

2002/95/EC

RoHS

2002/95/EC

RoHS

2002/95/EC

RoHS

2002/95/EC

RoHS

CO21, 2 NO1,3 SO2

1,4 Mercury PCB’s Lead

Halo LED 13.8 1,129 2 7 None None None

26W CFL 28 2,298 4 15 <0.025 None <0.4

100W A19 100 8,189 14 52 None None Traces6

65W BR30 65 5,322 9 34 None None Traces6

Systemwattage

The Cooper Lighting Family

Halo MetaluxLumarkSure-LitesNeo-RayCorelitePortfolioIrisShaperLumièreInvueMcGraw-EdisonioFail-SafeMWSPDSRSAAmetrix

Cooper Industries Ltd.600 Travis, Ste. 5800Houston, TX 77002-1001P: 713-209-8400www. cooperindustries.com

Halo, ALL-PRO, ALL-NAIL, Got Nail!, Coilex and AIR-TITE are valuable trademarks of Cooper Industries in the United States and othercountries. You are not permitted to use the Cooper Trademarks without the proper written consent of Cooper Industries.

ADV090908 Printed in USA

International Sales, USACooper Lighting, LLC.1121 Highway 74 SouthPeachtree City, GA 30269

P: 770-486-4800F: 770-486-4801

Canadian FacilitiesCooper Lighting, LLC.5925 McLaughlin RoadMississauga, Ontario L5R 1B8

P: 905-507-4000F: 905-568-7049

Cooper Lighting, LLC.1121 Highway 74 SouthPeachtree City, GA 30269

P: 770-486-4800F: 770-486-4801

www.cooperlighting.com

USA FacilitiesCranbury, New JerseyElk Grove Village, IllinoisIrving, TexasOntario, CaliforniaPeachtree City, Georgia

Canadian FacilitiesMississauga, Ontario, Canada L5R 1B8Calgary, Alberta T2E 7V9

Canadian FacilitiesMississauga, Ontario, Canada L5R 1B8Calgary, Alberta T2E 7V9

halo - site.electricsuppliesonline.comsite.electricsuppliesonline.com/documents/halo... · ergy...

Documents