hand book 6th s… · web viewmicrocontroller & plc btee-604 ms. amarpreet kaur 5 open elective...

STUDENT HAND BOOKBACHELOR OF TECHNOLOGY

SEMESTER-6th

STUDY SCHEME-2015 onwards

SWAMI VIVEKANAND COLLEGE OF ENGINEERING & TECHNOLOGY, BANUR.

DEPARTMENT OF ELECTRICAL ENGINEERING


DEPARTMENT OF CIVIL ENGINEERING


STUDY SCHEME

Designed By:

Department of Electrical Engineering.



DEPARTMENT OF ELECTRICAL ENGINEERING

Department TeachersS.

No. Name of Teacher Contact no. Email-id

1. Ms. Saneha 9872894551 [email protected]

2. Mr. Arun Kumar 9416432028 [email protected]

3. Ms. Amarpreet Kaur 9646138327 [email protected]

4. Ms. Avneet Kaur 9417973297 Avneet0794kaur

Subject Teachers 6th SemesterS. No. Name of Subject Subject code Subject Teachers

name1 Electric Power Utilization BTEE-601 Ms. Saneha

2 Power System-II BTEE-602 Mr. Arun kumar

3 Non-Linear & Digital Control System BTEE-603 Ms. Avneet Kaur

4 Microcontroller & PLC BTEE-604 Ms. Amarpreet Kaur

5 Open Elective BTYY-6XX Mr. Arun Kumar

6 Elective-I BTEE-605X Ms. Saneha

7 Labortary – X(Power Electronics & Drives) BTEE-606 Ms. Saneha

8 Labortary –XI(Power System-II) BTEE-607 Mr. Arun Kumar

9 Labortary – XII(Micro Controller & PLC) BTEE-608 Ms. Amarpreet Kaur

MRSPTU SYLLABUS



BTEE-601 Electric Power UtilizationInternal Marks: 40 L T P CExternal Marks: 60 3 1 0 4

Total Marks: 100

Electric Drives: Electrical drives & Mechanical drives, Concept of electrical drives, Basic features of industrial drives, review of operating and starting characteristics of different types of electric motors for various drives (AC and DC motors). Estimation of rating and heating of motors, Load equalization (Fly wheel effect), Drives for particular services.

Electric Traction: Introduction to Indian railways system , Electric Locomotive Classes, Varioustypes of Traction system, single phase feeding arrangement prevalent in India. Substation. arrangements, Different Types of Catenary construction and line insulation, Span and dropper design Calculations.

Electric Heating and Welding: Methods of electric heating, types of electric heating, constructional details and performance of resistance heating furnace. Dielectric heating, Alternating current (AC).and Direct current (DC) Welding, Resistance and Arc Welding. Electric Beam Welding, Laser Welding. Typical construction of electrical welding AC and DC set.

Illumination: Production of light by different methods, terms used, laws of illumination, Different Artificial light sources, their construction and operating principles, Design of lighting schemes and equipment used for indoor, industrial and flood lighting.

Refrigeration and Air conditioning: Refrigeration system, Domestic refrigeration, Air conditioner, Comfort Air conditioning, Effective temperature.

Electrolysis: Laws of Electrolysis, Process voltage, current, energy, efficiency, Applications of

BOOKS RECOMMENDED:

1. Partab H., Modern Electric Traction, Dhanpat Rai 2. De N.K. and Sen P.K., Electric Drives, PHI publication 3. Berde M.S., Electric Motor Drives, Khanna Publishers 4 Gupta J.B., Utilization of Electric Power and Electric Traction, S.K. Kataria and Sons 5. Tripathy S. C., Electric Energy Utilization and Conservation, Tata McGraw Hill 6. Taylor E.O., Utilization of Electric Energy, Orient Blackswan 7 Hughes Austin, Electric Motors and Drives: Fundamentals, Types and Applications, Newnes, (2005)

Note: External question paper shall be set following guidelines to paper setter given at Page 61



ASSIGNMENTS

BTEE 601 ELECTRIC POASSIGNMENT 1

Q1. Compare the group drive individual drive?

Q2. Discuss the various advantages of electric drive over meachnical drive?

Q3. Give characteristics of DC motrors?

Q4. Why DC motors should not be started without starter?

Q5. What the various factors which descides a choice of electric derive?

ASSIGNMENT 2

Q1. What t5he different modes of heat transfer?

Q2. Name the materials which are used as heating elements?

Q3. Name the type of electrodes used in arc furnaces?

Q4. Why electric heating is preferred over other forms of heating?

Q5. What are essential properties of resistance heating elements?

ASSIGNMENT 3

Q1. What is welding?

Q2. What is the difference between plastic welding and fusion welding?

Q3. What is resistance welding?

Q 4. How does carbon arc welding differ from metal arc welding?

Q5. Why coated electrodes are preferred for welding?

ASSIGNMENT 4

Q1. What are the advantages of artificial lighting produced electrically?

Q2. What are the two laws of illumination?

Q3. Why sodium vapour discharge lamps are not used for general lighting?

Q4. Tungsten is selected as filament martial. Why?



Q5. What is mean spherical candle power?

ASSIGNMENT 5

Q1.Define MSCP, MHSP, MHCP?

Q2. Describe the requirements of good lighting?

Q3. Discuss the various factors to be considered while designing street lighting?

Q4. What is dielectric heating?

Q5. What is high frequency eddy current heating?

QUESTION BANK EPU

Q1. What is intermediate catenary?

Q2 What are the fluxes used in the arc welding?

Q3 What is luminance?

Q4 Differentiate between illumination& luminous intensity?

Q5 What is electrolysis?

Q6 What are the desirable properties of refrigerants?

Q7 What is meant by "rating of motor"?

Q8 What are the applications of induction drives?

Q9 Draw the neat sketch of refrigeration cycle?

Q10 What happen when an electric current is passed through solution of copper sulphate?

Q11Discuss various methods of electric heating in detail?

Q12 Explain the basic difference between "Electric arc welding" & "Resistance' welding?

Q13. Discuss various types of traction systems?

Q14} State Faraday's law of electrolysis? Explain them in details.

Q15} Draw and explain the starting characteristics of various electric motors?



Q16 ) What are the various applications of electrolysis? Explain extraction of metals (take example of any metal).

. Q17) Discuss in details: (a) Vapours compression refrigeration system. (b) Vapours absorption refrigeration system. (c) Thermo electric refrigeration system.

Q18) Write short note on : (a) Flood lighting. (b) Laws of illumination.

Q19 Explain drives. What are its basic types?

Q20 Describe fly wheel effect. .

Q21 Give layout of a substation and describe it

Q22 Mention various methods of electric heating and explain one of them.

Q23 Compare various welding methods.

Q24. Define illumination. Mention properties of a good illumination

.Q25List and explain light sources.

MRSPTU SYLLABUS

BTCE-602 POWER SYSTEM -II

Internal Marks : 40 L T PExternal Marks : 60 3 2 0Total Marks : 100

Sub-Station: Types, Main equipment in Substation, substation layout, Busbar-arrangements. Isolators and Fuses: Isolating switches functions, Types, Rating and operation. Fuse-types, Rating, Selection, theory and characteristics, applications. Circuit Breakers: Need for Circuit Breakers, Arc phenomenon, Theory of Arc Interruption, Recovery Voltage and Restriking Voltage, Various Types of Circuit Breakers. Principles and Constructional Details of Air Blast, Minimum Oil, SF6, Vacuum Circuit Breakers etc. Protective Relays: Introduction, classification, constructional features; and Characteristics of Electromagnetic, Induction, Thermal, Overcurrent relays, Directional relays, Distance relays, Differential, Translay, Negative sequence relay, introduction to static and up-based relays.



Protection of Feeders: Time graded protection, Differential and Distance protection of feeders, choice between Impedance, Reactance and Mho relays, Elementary idea about carrier current protection of lines. Protection of Generators and Transformers: Types of faults on alternator, Stator and rotor protection, Negative sequence protection, Loss of excitation and overload protection. Types of fault on transformers, percentage differential protection, Gas relays. Protection against over voltage and earthing: Ground wires, Rod gap, Impulse gap, Valve type and Metal Oxide Arresters, Line Arrester/Surge Absorber. Ungrounded neutral system, Grounded neutral system and Selection of Neutral Grounding.

BOOKS RECOMMENDED 1. Rao S., Switchgear and Protection, Khanna Publishers 2. Chakrabarti A., Soni, M.L. Gupta P.V. and Bhatanagar U.S., A Textbook on Power System Engineering, Dhanpat Rai and Co. 3. Wadhawa C.L. , A Course in Electrical Power, New Age international Pvt. Ltd 4. Badri Ram and Vishwakarma D.N., Power system Protection and Switchgear, Tata McGraw Hill 5. Deshpande M.V., Switchgears and Protection, Tata McGraw Hill Note: External question paper shall be set following guidelines to paper setter given at Page 61

ASSIGNMENTSBTCE-602 POWER SYSTEM -II

PTU SYLLABUSBTEE-603 Non Linear & Digital Control Systems

Internal Marks: 40 L T PExternal Marks: 60 4 1 0Total Marks: 100

STATE VARIABLE TECHNIQUES: State variable representation of systems by various methods, solution of state variable model. Controllability and observability.

PHASE PLANE ANALYSIS: Singular points, Method of isoclines, delta method , phase portrait of second order nonlinear systems, limit cycle.



DESCRIBING FUNCTION ANALYSIS: Definition, limitations, use of describing function for stability analysis, describing function of ideal relay, relay with hystersis, dead zone, saturation, coulomb friction and backlash.

LYAPUNOV’S STABILITY METHOD: Lyapunov's direct method, generation of Lyapunov’s function by Krasovskii’s and Variable Gradient methods

SAMPLED DATA SYSTEMS: Sampling process, mathematical analysis of sampling process, application of Laplace transform. Reconstruction of sampled signal, zero order, first order hold. Ztransform definition, evaluation of Z-transform, inverse Z-transform, pulse transfer function, limitations of Z-transform, State variable formulation of discrete time systems, solution of discrete time state equations. Stability definition, Jury's test of stability, extension of Routh-Hurwitz criterion to discrete time systems.

BOOKS RECOMMENDED: 1. Ogata K., Modern control engineering. Prentice Hall (India) 2. Nagrath I.J., Gopal M., Control system engineering, New Age Publications

ASSIGNMENTSBTEE-603 Non Linear & Digital Control Systems

ASSIGNMENT 1

Q1. Define Non-linear system?

Q2. Define describing function?

Q3. Write short note on phase plane techniques?

Q4. Write the procedure for drawing a trajectory?



Q5. Explain phase portraits?

ASSIGNMENT 2

Q1. Explain Limit cycle?

Q2. Explain Controllability?

Q3. What are the conditions required for Find out Observability?

Q4. What the methods used for state variable?

Q5. Explain the methods of isoclines?

ASSIGNMENT 3

Q1. Explain singular points?

Q2. Describe the limitations of describing function?

Q3. State Dead-Zone?

Q4. Explain Lyapunov method?

Q5. Explain Coulomb friction?

ASSIGNMENT 4

Q1. Explain Sampling process?

Q2. Explain mathematical analysis of sampling process?

Q3. Describe Z-transform?

Q4. Discuss application of laplace transform?

Q5. Explain Zero-order?

ASSIGNMENT 5

Q1. Define stability?

Q2. Explain Jury’s test of stability?

Q3. Discuss the limitations of Z-transform?

Q4. Explain inverse z-transform?

Q5. Explain Variable gradient method?



QUESTION BANK NLDCS

Q1 Define state of a system.

Q2 What are the differences between linear system an4 non-linear system?

Q3 State the conditions for completely controllable system..

Q4 .What is meant by singular points? Mention their importance.

Q5 State disadvantages of digital control system.

Q6 Find the Z transform of F(s) = 4/S(S2+ 4). .

Q7) Define describing function.

Q8 What do you mean by the problem of aliasing?

Q9 Give significance of zero order hold device

Q10 What is meant by adaptive control?

Q11.State and explain Liapunovs main stability theorem.

Q12) What are sample and hold circuits? Obtain the transfer function and frequency response of zero order hold.

Q13) State and explain Jury's stability test

Q14 What is state transition matrix?

Q15.List out the properties and advantages of state transition matrix.

Q16.Consider the system described by the equations X1 =X2, x = - Xl - X2 + 2 , Investigate the stability of the equilibrium state. Use the direct method of Lyapunov.

Q17 Derive describing function of a relay with dead zone and hysteresis

Q18. Discuss the applicability of Routh Hurwitz criterion to discrete time systems.

Q19) Write short notes on : (a) Controllability. (b)kIasovskii's theorem.

Q20. Enumerate advantages of state variable representation of systems.



MRSPTU SYLLABUS

BTEE-604 Microcontroller & PLCInternal Marks: 40 L T PExternal Marks: 60 4 1 0Total Marks: 100

Introduction: Microprocessor, Micro-controllers and their comparison. The 8051 Architecture: Introduction, 8051 micro-controller hardware, input/ output, pins, ports and circuits, external memory, counters and timers, serial data input/ output, interrupts

8051 Assembly Language Programming: The mechanics of programming, assembly language programming process, programming tools and techniques, instruction set (data moving, logical operations, arithmetic operations, jump and call instructions)

8051 Microcontroller Design: Micro-controller specification, external memory and memory space decoding, reset and clock circuits, expanding input and output (I/O), memory mapped I/O, memory address decoding, memory access times, testing the design, timing subroutines, lookup tables for the 8051, serial data transmission Microcontroller Applications : Interfacing keyboards, displays, Digital-to-Analog (D/A) multiple interrupts, serial data communications, introduction to the use of assemblers and simulators Embedded Systems: Introduction to PLDs and FPGA- architecture, technology and design issues, implementation of 8051 core.

Programmable Logic Controllers (PLC): Introduction, operation of PLC, difference between PLC and Hardwired system, difference between PLC and Computer, relay logic and ladder logic, ladder commands and examples of PLC ladder diagram realization, PLC timers, PLC counters, PLC classification.

RECOMMENDED BOOKS:



1. Kenneth J Ayola, The 8051 Micro Controller- Architecture, Programming and Application, Penram International Publication 2. John B Peatman, Design with Micro Controller, Tata McGraw Hill 3. Ray A. K. and Bhurchandi K. M., Advanced Microprocessors and Peripherals; Architecture, Programming and Interfacing, Tata McGraw Hill 4. Mazidi M. A. and Mazidi J. G., The 8051 Micro-controller and Embedded System, Pearson Education. 5. Udayashankara V. and Mallikarjunaswamy M.S., 8051 Microcontroller Hardware, Software and Applications, TataMcGraw Hill Education Pvt. Ltd., (2010) 6. Surekha Bhanot, Process Control, Oxford Higher Education. 7. Otter, Job Dan, Programmable Logic Controller, P.H. International, Inc, USA 8. Dunning Gary, Introduction to PLCs, Tata McGraw Hill 9. Kumar Rajesh, Module on PLCs and their Applications, NITTTR Chandigarh Note: External question paper shall be set following guidelines to paper setter given at Page 61

ASSIGNEMNT 1

Q1 What is microcontroller?

Q 2. How many I/O ports are placed in microcontroller 8051?

Q3. Define DPTR.

Q4. What is the purpose of PSW register?

Q5. What is use of EA pin?

ASSIGNEMNT 2

Q1. Explain the Architecture of 8051.What are the blocks in Microcontroller.

Q2. Explain the Pin Diagram of 8051.

Q3. Explain the Instruction set with examples

.Q 4. Explain the block diagram of 8051 Microcontroller.

Q5. Define machine cycle.

ASSIGNEMNT 3

Q1. How many bit addressable location are placed in internal RAM?

Q2. What is interrupts signal?

Q3. Name the types of 8051 interrupts signals

Q4. Define clock cycle. Define machine cycle.

Q5. What is assembler?



ASSIGNEMNT 4

Q1. Mention the timers of 8051?

Q2. Mention the bit addresses of ports p0 and p1?

Q 3. How many bit addressable locations are placed in internal RAM of 8051?

Q 4. Mention the SFR registers used in timer operation?

Q 5. Mention the operating modes of 8051?

ASSIGNEMNT 5

Q1 Explain the bit addresses for I/O of 8051.

Q 2. Explain TMOD and TCON registers.

Q 3. Explain bit addresses for RAM.

Q 4. Explain the steps to program the timer 1 in mode 2.

Q 5. Explain in detail about the programming of 8051 timer.

Question bank MC and PLC

Q1What do you mean by Interrupt?

Q2 Write the various interrupts of 8051, their priority and jump address.

03 Compare Microprocessor and Microcontroller.

Q4 Short note on ports of 8051.

Q5 Draw the architecture of Intel 8051 and state its main characteristics. 04

Q6Explain 1) sourcing and sinking 2) Latch – unlatch with reference to PLC.

Q7 State the points to be considered while selecting a PLC. Write the application of PLC.

Q8 Write the application of microcontrollers.

Q9 Write advantages and disadvantages of PLC

Q10 State TWO instructions with meanings; of Immediate addressing mode. 2

.Q11 State TWO instructions with meanings; of Register addressing mode. 3



Q12. State TWO instructions with meanings; of Arithmetic group of instructions.

Q13 Give four differences between Relay panel & P.L.C.

Q14 Name any three SFR of µc 8051 with their functions.

Q15Name any three pins of µc 8051 with their functions

Q16 Write any four applications of µc 8051. 04

Q17 Briefly explain timers available in µc 8051.

Q18 What are the parameters on which selection of a particular microcontroller depends?

Q19) Describe with block diagram basic architecture of 8051?

Q20) What are addressing modes in 8051? Discuss each with example

MRSPTU SYLLABUSInternal Marks : 30 L T PExternal Marks : 20 0 0 2Total Marks : 50

BTEE-606 Laboratory-X (Power Electronics and Drives)Note : List of experiments are to be performed in a semester. list of experiments is given below:

List of Experiments:

1. To study principle of operation of SCR, plot V-I characteristics and study the effect of gate triggering on turning on of SCR. 2. To draw V-I characteristics of an UJT and to use UJT as relaxation oscillator.3. To study the effect of free-wheeling diode on power factor for single phase half-wave rectifier with R-L load. 4. To plot waveforms for output voltage and current, for single phase full-wave, fully controlled bridge rectifier, for resistive and resistive cum inductive loads. 5. Study of the microprocessor based firing control of a bridge converter. 6. To study three phase fully controlled bridge converter and plot waveforms of output voltage, for different firing angles. 7. Study of Jones chopper or any chopper circuit to check the performance. 8. Thyristorised speed control of a D.C. Motor. 9. Speed Control of induction motor using thyristors. 10. Study of series inverter circuit and to check its performance.11. Study of a single-phase cycloconverter.



12. To check the performance of a McMurray half-bridge inverter


BTEE-607 Laboratory-XI (Power system II)

Note: Atleast TEN experiments are to be performed in a semester. list of experiments is given below:


1. To study the performance of a transmission line. Also compute its ABCD parameters. 2. Study of Characteristics of over current and earth fault protection. 3. To study the operating characteristics of fuse. (HRC or open type) 4. To find the earth resistance using three spikes 5. To study over current static relay. 6. To study the different types of faults on transmission line demostration panel/model. 7. To study the radial feeder performance when a. Fed at one end b. Fed at both ends 8. To study the performance of under voltage and over voltage relay. 9. To study the characteristics of bimetal mini circuit breakers. 10. To study the characteristics of Distance Relay. 11. To find the breakdown strength of transformer oil.


BTEE-607 Laboratory-XII( Microcontroller & PLC )Note: Atleast TEN experiments are to be performed in a semester. list of experiments is given below:


1. Study of 8051/8031 Micro-controller kits.

2. Write a program to add two numbers lying at two memory locations and display the result.

3. Write a program for multiplication of two numbers lying at memory location and display the result.



4. Write a program to check a number for being ODD or EVEN and show the result on display.

5. Write a program to split a byte in two nibbles and show the two nibbles on display.

6. Write a program to arrange TEN numbers stored in memory location in ascending and descending

order.

7. Write a program to find a factorial of a given number.

8. Study of interrupt structure of 8051/8031 micro-controllers.

9. Write a program to show the use of INT0 and INT1. 10. Write a program of flashing LED connected to

port 1 of the micro-controller.

11. Write a program to control a stepper motor in direction, speed and number of steps.

12. Write a program to control the speed of DC motor.

13. Implementation of different gates using PLC. 14. Implementation of DOL and star delta starter using

PLC.

15. Implement basic logic operations, motor start and stop operation using (i) Timers (ii) Counters

16. Motor forward and reverse direction control using PLC.

17. Write and implement the LD control program for rack feeder.

18. Make a PLC based system for separating and fetching work pieces.

19. Make a PLC based control system for conveyor belt.

20. Implement a PLC based traffic light control.


hand book 6th s… · web viewmicrocontroller & plc btee-604 ms. amarpreet kaur 5 open elective...

Documents