hanger type 1 general installation: curved rail system
TRANSCRIPT
Knight Global (248) 377-4950 www.knightglobal.com"Due to continuous product development, Knight Global reserves the right to alter product specifications without prior notice."
Hanger Type 1
Hanger Type 2
Hanger Type 3
Curved rail rod and ball I-beam hanger adjustable 5"-5 5/8": #MRHS44221 (4100 series rail)#MRHS49111 (7500 series rail)Fits 2"-7" flange
#MRHS44241 (4100 series rail) #MRHS49131 (7500 series rail)Fits 7"-11" flange
Curved rail rod and ball I-beam hanger is adjustable 15 7/16"-16 5/8": #MRHS44261 (4100 series rail)#MRHS49151 (7500 series rail)Fits 2"-7" flange
#MRHS44281 (4100 series rail) #MRHS49171 (7500 series rail)Fits 7"-11" flange
Top portion of this curved rail hanger pivots 360 degrees on the vertical axis to allow hanger to be attached to various angles of the header steel or truss.
Curved rail rigid hanger#MRHS4440
NOTE:For curved rail sections, there should be a minimum of (2) hangers installed.
Straight Rail Section
Spacers
Top View
Spacers Slide Plate and Bolts
Splice Block and Bolts
Curved Rail Section
General Installation: Curved Rail System