hardware and fastener identification hardware and fastener identification by dave wilson information...
TRANSCRIPT
Hardware and Fastener
Identification
Hardware and Fastener
Identification
By Dave Wilson
Information Technology and Communication ServicesITCS Instructional Materials
College of Agricultural, Consumer and Environmental SciencesUniversity of Illinois at Urbana-Champaign
Copyright © 2006 - University of Illinois Board of TrusteesA-AG
Miscellaneous Fasteners with names
Miscellaneous Fasteners with names
Pin, clevis
Hitch pin clip
Cotter key
roll pin
linch pinSlide 7 of 25
square key
Key, woodruff
E-clip
Snap ring, external
Snap ring, internal
Hose clamp
Hose clamp
Pop Rivet (blind rivet)
Rivet, flat head, brass
Anchors, wall
wall board anchor
fluted dowel
spiral dowel
Biscuit
The EndThe End
Slide 25 of 25
Quit
This set of images was photographed by David Riecks and Dave Wilson, ITCS, College of Agricultural, Consumer and Environmental Sciences, University of Illinois. The presentation was reviewed by
Dr. Joe Harper, Department of Agricultural and Biological Engineering at the University of Illinois.
University of Illinois2517 South Wright Street
Champaign, IL 61825(800) 345-6087
www.aces.uiuc.edu/ITCS/IM
Clicking Quit will return to the Master Navigation Slide