hardware - kmaccorp.com f10.pdf · hardware 416 fmponline.com hardware equipment load height tubing...
TRANSCRIPT
415
HARD
WAR
E
AAlarms and Panic Bars, Exit ...................441–442Anti-slip Items ...............................................469
bBar Rail ........................................................450 Stool Swivels ...........................................450Bars, Panic. ..........................................441–442Blender Clutch Removal, Unclutchable™. .........468Bolts ............................................................454Brackets and Bracket Clips .....................448–449Brushes ................................................461–462Bucket Openers ............................................468Bullet Feet ............................................426–427Bumpers .............................................. 421, 432
cCable, Equipment Restraining .........................421 Caps, End ....................................................432Casterboot™ ................................................420Casters and Caster Wrenches ................416–420Catches .......................................................447Chain, Sash .................................................452Clamp, Kick Plate Spring ...............................426Cleaner, Plastic .............................................449Clips, Bracket ...............................................449Closers, Door ...............................................440Cloths, Polishing ...........................................470Coat Hooks ..................................................452
DDeburring Tool, Adjustable .............................466Dials ....................................................445–446Digital Multimeter ..........................................463Door Closers ...................................................440 Hardware .......................................442–444 Holders ...........................................443–444 Pulls ........................................................438 Sheaves ..........................................436–437 Stops ......................................................444Drawer Slides ...............................................436Drill Bits .......................................................461
EElbows .........................................................451Eliason® Door Parts .................... See RefrigerationEnd Caps .....................................................432Epoxy and Epoxy Putty ..................................471Exit Bars and Alarms .............................441–442
FFace Mask, Disposable ..................................468Fan Blade/Blower Wheel Puller ......................466Fasteners and Fastener Kits ............453, 455–457Feet, Bullet ...........................................426–427Finishing Strips, Stainless Steel .......................452Food Grade Lubricants ..........................471–472Funnel, Plastic ...............................................468
GGas Pressure Test Kits ......................................467 Valve Handles..........................................445Gauges, Pressure ..........................................467Glass Capping .................................................437
Cleaner ...................................................449 Cutter, Gauge Glass .................................461Glides .................................................427–431Goggles, Safety ............................................468Grease, Food Grade .............................471–472
HHandles .......................................................445Hasps ..........................................................443Hinges ................................................ 439, 450Holders, Door .......................................443–444Hooks, Coat .................................................452
IInspection Mirrors .........................................462
KKick Plate Spring Clamp ................................426Kick Plates....................................................444Kits
Allen Head Set Screw ...............................458 Caster Brake............................................420 Electrical Strain Relief Bushing ...................457 E-ring ......................................................457 Fastener ..........................................455–457 Gas Pressure Test .....................................467
Hole Saw ................................................464 Metal Punch ............................................464 Orifice Drill .............................................467 Retaining Ring .........................................457 Roll Pin ...................................................458 Spring ....................................................458 Threaded Insert Tool .................................464
Knife Sharpeners ..............................................465 Utility ......................................................468
Knobs ..................................................445–446
LLatches ........................................................447Legs and Leg Sockets ............................422–425Lever/Twist Waste Tool ..................................466Lifting/Carrying Tool .....................................466Locks ...................................................442–443Lubricants, Food Grade .........................471–472
MMagic Sliders™ ............................................432Manometer, Water-type .................................467Mask, Face ..................................................468Match Holder, Extendible ...............................467Mirrors and Parts, Convex .............................440Mirrors, Inspection ........................................462Multimeter, Digital .........................................463
NNuts and Washers ................................453–454Nylon Hook & Loop Strips .............................459
PPaint, Spray .................................................470Panic Bars. ...........................................441–442Pencils, Sheet Metal Marking .........................466Pin Vise .......................................................467Plastic Cleaner ..............................................449Plates...........................................................444Polish and Polishing Cloths .............................470
Pressure Gauges ...........................................467Puller, Fan Blade/Blower Wheel .....................466Pulls ............................................................438Push/Pull Plates.............................................444Putty, Epoxy ..................................................471
RRail, Service Bar ...........................................450Reamer ........................................................467Restraining Cable, Equipment .........................421Rivet Gun .....................................................460Rivets .................................................. 454, 460Rollers ............................................ .....433–435
SSash Chain ..................................................452Screwdrivers .................................................460Screws .........................................453, 455–456Sharpeners, Knife and Scissor ........................465Sheaves, Door ......................................436–437Sheet Metal Marking Pencils ..........................466Shelf Standard ..............................................449Shelving Brackets ..................................448–449Silicone Sealant and Release ..........................472Sliders™, Magic ...........................................432Slides, Drawer. .............................................436Sliding Door Hardware .................................437Spray Paint ..................................................470Spring Clamp, Kick Plate ...............................426Stops, Door ..................................................444Storage Boxes ..............................................459Superlevel® Glides ........................................428Swivels, Bar Stool .........................................450
TTable Shox® Glides .......................................429Tape ............................................................469Tape Dispenser, Wire Marker .........................463Tape Measures .............................................459Taps for Stainless Steel ..................................461Tester, Digital Clamp-on .................................463Threaded Inserts ...........................................464Tools ............................................453, 459–468Tracks ..........................................................437Tubing Cutter .....................................................462 Stainless Steel ..........................................451Twist/Lever Waste Tool ..................................466
UUnclutchable™ Blender Clutch Removal ...........468Utility Knives .................................................468
WWall Fasteners, Wing-It™...............................453Washers and Nuts ................................453–454Waste Tool, Lever/Twist .................................466Wheel Puller, Fan Blade ................................466Wheels, Replacement Caster ..........................419Wire Marker Tape Dispenser .............................463 Ties ........................................................459Wobble Wedges® .........................................429Wrenches, Caster .........................................417
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866
HARDWARE
FmPONLINE.COM416
HARDWARE
Equipment
LoadHeight
Tubing
Pipe
CHoosing A CAstERWhen replacing casters, try to match the new set as closely as possible to the originals. Upgrading a set of casters to a heavier duty type is recommended if casters are prone to excessive wear.
When adding a set of casters, consider the weight and size of the equipment as well as the floor conditions. A heavy piece of equipment should have large wheels to hold the weight and provide easy rolling. Floors that are rough can cause rubber caster wheels to wear quickly. Floors that are exposed to grease, oil, or heavy detergents can also cause deterioration. In both cases, a caster with a polyurethane wheel will last longer than a caster that has a rubber wheel. More information on selecting casters is provided below.
InstItutIonal Grade – This is the highest grade of caster available for the foodservice industry.
load HeIGHt – This is the distance a caster raises a piece of equipment off the floor or the overall height of the caster when mounted. It is important when replacing casters because the new casters may cause the equipment to sit higher or lower if the load height is different from the original set.
load CaPaCIty – This is the total weight a set of 4 casters can carry while the equipment is in motion.
swIvel stem Casters – The stem of these casters fits inside of a leg. The stem is tightened to expand the rubber sleeve and "lock" the caster into the leg.
•Castersfor1"tubingaregenerallyusedonfreestanding shelving and carts
•Castersfor15⁄8" tubing are generally used on work tables and equipment stands
How to measure tubInG and PIPe
•Tubinghasathinnerwallthicknessthanpipe
•Tubingismeasuredfromtheoutsidediameter
•Pipeismeasuredfromtheinsidediameter
•Todeterminepipesize,measurethemale(threaded) end of the pipe:
If OD is 11⁄4" and under, subtract 1⁄4". If OD is 15⁄8" and over, subtract 3⁄8".
Plate mount Casters – These casters usually are used on equipment. The mounting holes in the plate are commonly elongated for easier mounting and alignment.
tHreaded stem Casters – These casters are installed on equipment with a threaded hole, or where a caster can be secured with a nut. They are also ideal for replacing stud mount (threaded) legs on a piece of equipment.
cASTER TyPES
UNDERSTANDING SPEcIFIcATIoNS
blaCk and Gray rubber wHeels
These wheels are made with a TPR tread material which is bonded to a polyolefin black core. This construction offers superior performance, silent operation, and resistance to all common chemicals. The medium-duty wheels are supplied with Delrin bearings, and the standard-duty wheels have plain bearings.
PolyuretHane wHeels
These wheels are made with gray, non-marking polyurethane tread material which is mechanically locked to a gray polyolefin core. This construction makes these wheels virtually indestructible and shock resistant to sudden impacts. In addition to rolling ease and quiet operation, these wheels are resistant to water, acids, oil, and common chemicals. The medium-duty wheels are supplied with precision ball bearings, and the standard-duty wheels have Delrin bearings.
WHEEL TyPES
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 417
HARD
WAR
E
sWivEl stEm CAstERs
23⁄4"
LoadHeight
WheelDiameter
MEDIUM-DUTy cASTERS•11⁄4" wheel width•3⁄8" axle bolt diameter•Non-markingwheels
Item no.wHeel
dIameterload
HeIGHt brakeload
CaPaCIty*
For tubInG
odblaCk rubber wHeel wItH PlastIC Hub•Delrinbearing120-1005 31⁄2" 41⁄2" no 900 lb 1"120-1006 31⁄2" 41⁄2" yes 900 lb 1"120-1024 31⁄2" 41⁄2" no 900 lb 11⁄2"†120-1025 31⁄2" 41⁄2" yes 900 lb 11⁄2"†120-1033 31⁄2" 41⁄2" no 900 lb 15⁄8"120-1034 31⁄2" 41⁄2" yes 900 lb 15⁄8"120-1088 5" 61⁄8" no 1000 lb 1"120-1089 5" 61⁄8" yes 1000 lb 1"120-1122 5" 61⁄8" no 1000 lb 11⁄2"†120-1123 5" 61⁄8" yes 1000 lb 11⁄2"†120-1134 5" 61⁄8" no 1000 lb 15⁄8"120-1135 5" 61⁄8" yes 1000 lb 15⁄8"Gray rubber wHeel wItH PlastIC Hub•Ballbearing120-1026 31⁄2" 41⁄2" no 900 lb 11⁄2"†120-1027 31⁄2" 41⁄2" yes 900 lb 11⁄2"†120-1035 31⁄2" 41⁄2" no 900 lb 15⁄8"120-1036 31⁄2" 41⁄2" yes 900 lb 15⁄8"120-1090 5" 61⁄8" no 1000 lb 1"120-1091 5" 61⁄8" yes 1000 lb 1"120-1124 5" 61⁄8" no 1000 lb 11⁄2"†120-1125 5" 61⁄8" yes 1000 lb 11⁄2"†120-1136 5" 61⁄8" no 1000 lb 15⁄8"120-1137 5" 61⁄8" yes 1000 lb 15⁄8"PolyuretHane wHeel wItH PlastIC Hub•Ballbearing
120-1009 31⁄2" 41⁄2" no 1000 lb 1"120-1010 31⁄2" 41⁄2" yes 1000 lb 1"120-1028 31⁄2" 41⁄2" no 1000 lb 11⁄2"†120-1029 31⁄2" 41⁄2" yes 1000 lb 11⁄2"†120-1037 31⁄2" 41⁄2" no 1000 lb 15⁄8"120-1038 31⁄2" 41⁄2" yes 1000 lb 15⁄8"120-1092 5" 61⁄8" no 1200 lb 1"120-1093 5" 61⁄8" yes 1200 lb 1"120-1126 5" 61⁄8" no 1200 lb 11⁄2"†120-1127 5" 61⁄8" yes 1200 lb 11⁄2"†120-1138 5" 61⁄8" no 1200 lb 15⁄8"120-1139 5" 61⁄8" yes 1200 lb 15⁄8"*Load capacity per set of 4† Casters for 11⁄2" OD tubing can be used for 11⁄4" pipe.
STANDARD-DUTy cASTERS WITH PLAIN bEARINGS•15⁄16" wheel width•5⁄16" axle bolt diameter•Non-markingwheels
Item no.wHeel
dIameterload
HeIGHt brakeload
CaPaCIty*
For tubInG
odblaCk rubber wHeel wItH PlastIC Hub120-1058 4" 43⁄4" no 460 lb 1"120-1059 4" 43⁄4" yes 460 lb 1"120-1066 4" 43⁄4" no 460 lb 11⁄2"†120-1067 4" 43⁄4" yes 460 lb 11⁄2"†120-1075 4" 43⁄4" no 460 lb 15⁄8"120-1076 4" 43⁄4" yes 460 lb 15⁄8"120-1117 5" 53⁄4" no 500 lb 1"120-1118 5" 53⁄4" yes 500 lb 1"120-1130 5" 53⁄4" no 500 lb 11⁄2"†120-1131 5" 53⁄4" yes 500 lb 11⁄2"†120-1147 5" 53⁄4" no 500 lb 15⁄8"120-1148 5" 53⁄4" yes 500 lb 15⁄8"Gray rubber wHeel wItH PlastIC Hub120-1070 4" 43⁄4" no 460 lb 15⁄8"120-1071 4" 43⁄4" yes 460 lb 15⁄8"120-1079 5" 53⁄4" no 500 lb 1"120-1132 5" 53⁄4" no 500 lb 15⁄8"120-1133 5" 53⁄4" yes 500 lb 15⁄8"PolyuretHane wHeel wItH PlastIC Hub120-1062 4" 43⁄4" no 600 lb 11⁄2"†120-1045 4" 43⁄4" yes 600 lb 1"120-1063 4" 43⁄4" yes 600 lb 11⁄2"†120-1072 4" 43⁄4" no 600 lb 15⁄8"120-1073 4" 43⁄4" yes 600 lb 15⁄8"120-1044 4" 43⁄4" no 800 lb 1"120-1181 5" 53⁄4" yes 640 lb 11⁄2"†120-1182 5" 53⁄4" no 640 lb 11⁄2"†120-1142 5" 53⁄4" no 640 lb 15⁄8"120-1143 5" 53⁄4" yes 640 lb 15⁄8"
*Load capacity per set of 4† Casters for 11⁄2" OD tubing can be used for 11⁄4" pipe.
cASTER WRENcH KITno. 142-1506•Forattachingandtighteningstemcasters
to equipment•Kitincludes:3“flat”steelwrenches:
113⁄16" open, 13⁄16" hex-head, and 3⁄4" hex-head
HARDWARE
FmPONLINE.COM418
HARDWARE
STANDARD-DUTy cASTERS•5⁄16" axle bolt•15⁄16" (24mm) wheel width•Ballbearingswivel•Non-markingwheels
Item no.wHeel
dIameter load HeIGHt brakeload
CaPaCIty*blaCk rubber wHeel wItH PlastIC Hub120-1019 3" (76mm) 33⁄4" (95mm) no 400 lb (181kg)
120-1020 3" (76mm) 33⁄4" (95mm) yes 400 lb (181kg)
120-1052 4" (102mm) 43⁄4" (121mm) no 460 lb (209kg)
120-1053 4" (102mm) 43⁄4" (121mm) yes 460 lb (209kg)
120-1107 5" (127mm) 6" (152mm) no 500 lb (227kg)
120-1108 5" (127mm) 6" (152mm) yes 500 lb (227kg)
PolyuretHane wHeel wItH PlastIC Hub 120-1011 3" (76mm) 33⁄4" (95mm) no 500 lb (227kg)
120-1012 3" (76mm) 33⁄4" (95mm) yes 500 lb (227kg)
120-1048 4" (102mm) 43⁄4" (121mm) no 600 lb (272kg)
120-1049 4" (102mm) 43⁄4" (121mm) yes 600 lb (272kg)
120-1097 5" (127mm) 53⁄4" (146mm) no 640 lb (290kg)
120-1098 5" (127mm) 53⁄4" (146mm) yes 640 lb (290kg)
*Load capacity per set of 4
MEDIUM-DUTy cASTERS•11⁄4" (32mm) wheel width•3⁄8" axle bolt•Ball bearing swivel•Non-markingwheels
Item no. wHeel
dIameter load HeIGHt brakeload
CaPaCIty*blaCk rubber wHeel wItH PlastIC Hub
120-1013 31⁄2" (89mm) 45⁄8" (117mm) no 900 lb (408kg)
120-1014 31⁄2" (89mm) 45⁄8" (117mm) yes 900 lb (408kg)
120-1099 5" (127mm) 61⁄4" (159mm) no 1000 lb (454kg)
120-1100 5" (127mm) 61⁄4" (159mm) yes 1000 lb (454kg)
Gray rubber wHeel wItH PlastIC Hub
120-1015 31⁄2" (89mm) 45⁄8" (117mm) no 900 lb (408kg)
120-1016 31⁄2" (89mm) 45⁄8" (117mm) yes 900 lb (408kg)
120-1101 5" (127mm) 61⁄4" (159mm) no 1000 lb (454kg)
120-1102 5" (127mm) 61⁄4" (152mm) yes 1000 lb (454kg)
PolyuretHane wHeel wItH PlastIC Hub
120-1017 31⁄2" (89mm) 45⁄8" (117mm) no 1000 lb (454kg)
120-1018 31⁄2" (89mm) 45⁄8" (117mm) yes 1000 lb (454kg)
120-1103 5" (127mm) 61⁄4" (159mm) no 1200 lb (544kg)
120-1104 5" (127mm) 61⁄4" (159mm) yes 1200 lb (544kg)
*Load capacity per set of 4
21⁄4"(57mm)
3"(76mm)
13⁄4"(44mm)
1"(25mm)
Standard-duty
Polyurethane
27⁄8"(73mm)
23⁄8"(60mm)
35⁄8"(92mm)
13⁄4"(44mm)
Medium-duty
STANDARD- DUTy cASTERno. 196-1050
•2"(51mm) diameter wheel•7⁄8" (22mm) wheel width•23⁄4" (70mm) load height•300lb(136kg) load capacity per set of 4•Ballbearing•Non-markingblackpolyolefinwheel
HEAvy-DUTy cASTERS•Ballbearingswivel•Non-markingwheels
Item no.wHeel
dIameterload
HeIGHt brake load CaPaCIty*Gray PolyuretHane wHeel wItH PlastIC Hub •2"(35mm) wheel width120-1084 5" (127mm) 61⁄2" (165mm) no 2800 lb (1270kg)
120-1085 5" (127mm) 61⁄2" (165mm) yes 2800 lb (1270kg)
120-1150 6" (152mm) 71⁄2" (191mm) no 3200 lb (1451kg)
120-1151 6" (152mm) 71⁄2" (191mm) yes 3200 lb (1451kg)
120-1155 8" (203mm) 91⁄2" (241mm) no 3600 lb (1633kg)
120-1156 8" (203mm) 91⁄2" (241mm) yes 3600 lb (1633kg)
blaCk rubber wHeel wItH PlastIC Hub •11⁄4" (32mm) wheel width•Can be used to replace 6" (152mm) leg with 31⁄2" (89mm) square mounting plate120-1185 5" (127mm) 61⁄8" (156mm) no 2800 lb (1270kg)
120-1186 5" (127mm) 61⁄8" (156mm) yes 2800 lb (1270kg)
*Load capacity per set of 4
21⁄4"(57mm)
3"(76mm)
13⁄4"(44mm)
1"(25mm)
4"(102mm)
31⁄2"(89mm)
35⁄16"(84mm)
23⁄4"(70mm)
213⁄16"(71mm)
23⁄4"(70mm)
41⁄2"(114mm)
31⁄2"(89mm)
sWivEl plAtE CAstERs
Rubber
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 419
HARD
WAR
E
CAstERs
B
C
A
REPLAcEMENT WHEELS FoR cASTERS•Non-markingwheels•Wheelsreplacethoseonmanyinstitutionalgradecasters
wHeel loadItem no. dIameter CaPaCIty a b C
STANDARD-DUTyblaCk rubber wHeel wItH PlastIC Hub
•Plainbearing
120-1023 3" (76mm) 100 (45kg) 15⁄16" (24mm) 5⁄16" (8mm) 11⁄4" (32mm)120-1061 4" (102mm) 115 (52kg) 15⁄16" (24mm) 5⁄16" (8mm) 11⁄4" (32mm)120-1119 5" (127mm) 125 (57kg) 15⁄16" (24mm) 5⁄16" (8mm) 11⁄4" (32mm)
Gray rubber wHeel wItH PlastIC Hub
•Plainbearing
120-1004 3" (76mm) 100 (45kg) 15⁄16" (24mm) 5⁄16" (8mm) 11⁄4" (32mm)120-1083 5" (127mm) 125 (57kg) 15⁄16" (24mm) 5⁄16" (8mm) 11⁄4" (32mm)
PolyuretHane wHeel wItH PlastIC Hub
•Plainbearing
120-1057 4" (102mm) 150 (68kg) 15⁄16" (24mm) 5⁄16" (8mm) 11⁄4" (32mm)120-1116 5" (127mm) 160 (73kg) 15⁄16" (24mm) 5⁄16" (8mm) 11⁄4" (32mm)
MEDIUM-DUTyblaCk rubber wHeel wItH PlastIC Hub
•Delrinbearing
120-1039 31⁄2" (89mm) 225 (102kg) 11⁄4" (32mm) 1⁄2" (13mm) 11⁄2" (38mm)120-1096 5" (127mm) 250 (113kg) 11⁄4" (32mm) 1⁄2" (13mm) 11⁄2" (38mm)
Gray rubber wHeel wItH PlastIC Hub •Ballbearing120-1032 31⁄2" (89mm) 225 (102kg) 11⁄4" (32mm) 3⁄8" (10mm) 15⁄8" (41mm)
120-1082 5" (127mm) 250 (113kg) 11⁄4" (32mm) 3⁄8" (10mm) 15⁄8" (41mm)
PolyuretHane wHeel wItH PlastIC Hub
•Ballbearing
120-1041 31⁄2" (89mm) 250 (113kg) 11⁄4" (32mm) 3⁄8" (10mm) 15⁄8" (41mm)120-1113 5" (127mm) 300 (136kg) 11⁄4" (32mm) 3⁄8" (10mm) 15⁄8" (41mm)
RIGID STEM cASTERS•Polyurethanewheelwithplastichub
STANDARD-DUTy• 15⁄16" wheel width• 5⁄16" axle bolt diameter•For15⁄8" OD tubing•Plainbearing
no. 120-1074 4" wheel diameter, 43⁄4" load height•600lbloadcapacitypersetof4
no. 120-1146 5" wheel diameter, 53⁄4" load height•640lbloadcapacitypersetof4
MEDIUM-DUTy•11⁄4" wheel width•For15⁄8" OD tubing•3⁄8" axle bolt•Ballbearing
no. 120-1040 31⁄2" wheel diameter, 43⁄8" load height•900lbloadcapacitypersetof4
no. 120-1145 5" wheel diameter, 61⁄8" load height•1200lbloadcapacitypersetof4
21⁄2"
LoadHeight
WheelDiameter
LoadHeight
WheelDiameterRIGID PLATE cASTERS
•Polyurethanewheelwithplastichub
wHeel load loadItem no. dIameter HeIGHt CaPaCIty*
STANDARD-DUTy•15⁄16" (24mm) wheel width•5⁄16" axle bolt•Plainbearing
120-1022 3" (76mm) 33⁄4" (95mm) 400 lb (181kg)120-1056 4" (102mm) 43⁄4" (121mm) 460 lb (209kg)120-1115 5" (127mm) 53⁄4" (146mm) 500 lb (227kg)
MEDIUM-DUTy•11⁄4" (29mm) wheel width•3⁄8" axle bolt•Ballbearing
120-1021 31⁄2" (89mm) 41⁄2" (114mm) 900 lb (408kg)120-1114 5" (127mm) 61⁄4" (159mm) 1000 lb (454kg)
*Load capacity per set of 4
13⁄4"(44mm)
23⁄4"(70mm)
23⁄8"(60mm)
35⁄8"(92mm)
HARDWARE
FmPONLINE.COM420
HARDWARE
THREADED STEM cASTERno. 232-1042• 3⁄8 -16 x 1" stem
cASTERbooT™•Foruseonbanquettables,wireshelving,
stacking chairs, utility tables, etc.•Foruseon1" OD tubing•350lb (159kg) load capacity per set of 4•Aluminumbootwithurethanewheel
no. 120-1176 Without brakeno. 120-1177 With brake (not shown)
FURNITURE cASTERS
HooDED bLAcK bALL cASTERS WITH cHRoME- PLATED HooDno. 120-1162 Friction stem caster•5⁄16" x 11⁄2" (8mm x 38mm) stemno. 120-1161 Friction stem caster•Withretainingring•2"(50mm) wheel diameter•7⁄16" x 11⁄2" (11mm x 38mm)
stem
cHRoME-PLATED METAL bALL cASTERS WITH WHITE NyLoN TIREno. 120-1166
•2"(51mm) wheel diameter• 5⁄16" x 11⁄2" (8mm x 38mm) stem
THREADED STEM cASTERS•Ballbearingswivel•Solidblackrubbernon-markingwheel•11⁄2" stem length
wHeel loadItem no. dIameter tHread brake CaPaCIty*
STANDARD-DUTy120-1002†† 2" 3⁄8 -16 no 320 lb 120-1030 3" 3⁄8 -16 no 400 lb 120-1031 3" 3⁄8 -16 yes 400 lb 120-1043** 3" 7⁄16 -14 no 400 lb 120-1000** 3" 1⁄2 -13 no 400 lb245-1025††† 3" 1⁄2 -13 yes 1000 lb 245-1026††† 3" 1⁄2 -13 no 1000 lb120-1068 4" 3⁄8 -16 no 460 lb 120-1069 4" 3⁄8 -16 yes 460 lb 120-1078** 4" 7⁄16 -14 no 460 lb 120-1149** 5" 7⁄16 -14 no 500 lb 120-1001 5" 1⁄2 -13 no 500 lb
MEDIUM-DUTy120-1042** 3" 7⁄16 -14 no 500 lb 120-1077** 4" 7⁄16 -14 no 660 lb 120-1060**† 4" 1⁄2 -13 no 660 lb 120-1094†† 5" 1⁄2 -13 no 1000 lb 120-1095†† 5" 1⁄2 -13 yes 1000 lb 120-1140*** 5" 5⁄8 -11 no 1000 lb 120-1141*** 5" 5⁄8 -11 yes 1000 lb
* Load capacity per set of 4** To add a brake, see brake kit***Donut-shaped gray non-marking wheel† Gray non-marking wheel†† Black plastic hub†††Blue polyurethane wheel
cASTER bRAKE KITno. 120-1175
•Easytoinstallontheabovethreadedstem casters marked with a double asterisk (**)
•Kitincludes:brakedisk,brakelever,and2axles for different wheel widths
SWIvEL DoLLy cASTERS•Largetopplate•General-dutyno. 120-1172 2" (51mm) diameter wheel•17⁄8" x 25⁄8" (48mm x 67mm) top plate•1"x21⁄8" (25mm x 54mm) screw centers•1"(25mm) wheel width•21⁄2" (64mm) load height•500lb(227kg) load capacity per set of 4•Hardrubberwheelno. 136-1050 21⁄4" (57mm) wheel diameter•Withbrake•21⁄2" x 35⁄8" (64mm x 92mm) top plate•13⁄4" x 3" (44mm x 76mm) screw centers•13⁄4" (44mm) wheel width•35⁄8" (92mm) load height•400lb(181kg) load capacity per set of 4•Blackpolyolefinwheelno. 120-1173 3" (76mm) diameter wheel•31⁄8" x 41⁄8" (79mm x 105mm) top plate•23⁄8" x 33⁄8" (60mm x 86mm) screw centers•11⁄4" (32mm) wheel width•313⁄16" (97mm) load height•720lb(327kg) load capacity per set of 4•Hardrubberwheelno. 120-1174 4" (102mm) diameter wheel•4"x5"(102mm x 127mm) top plate•3"x4"(76mm x 102mm) screw centers•15⁄8" (41mm) wheel width•5"(127mm) load height•1500lb(680kg) load capacity per set of 4•Hardrubberwheel
CAstERs
DUAL WHEEL SWIvEL cASTERno. 120-1183•2independent2"(51mm) diameter wheels•1⁄2-13 x 11⁄2" stem•2"(51mm) wheel width•23⁄4" (70mm) load height•800lb(363kg) load capacity per set of 4•Thumbscrewbrake•Solidblackrubbertires
WheelDiameter
LoadHeight
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 421
HARD
WAR
E
provides maximum protection for walls, equipment, and fixturesAll bumpers molded of non-marking gray rubber
RoUND bUMPERno. 133-1099
• 15⁄16" H x 31⁄4" D (24mm x 83mm)• 3⁄8" (10mm) hole diameter•Steelreinforced
WHEEL bUMPERno. 120-1111
•For1",11⁄2" and 15⁄8" OD tubing casters•5"diameter•Steelreinforced
BumpERs foR Rolling EquipmEnt
EqUIPMENT RESTRAINING cAbLE by DoRMoNT®
no. 133-1024
•Limitsmovementofequipmenttoprotectgashosesandelectricalconnections•Amustforequipmentoncasters•Adjuststo6'(1829mm) long•Restrainingcablemustbeadjustedshorterthanthegasorelectricalconnection•Includesmountinghardware
1. no. 133-1098 Corner bumper • 7⁄8" H x 1" W (22mm x 25mm)•33⁄4" (95mm) length per side•Includesscrewplugsforconcealed
mounting2. no. 133-1193 Strip bumper
•6'(1829mm) length•Metalchannelforconcealedmounting•Grayrubber
3. no. 133-1192 End cap•1"x3" (25mm x 76mm)
4. no. 133-1191 Corner connector•1"x33⁄8" (25mm x 86mm)
1
2 3
4
STRIP bUMPER SySTEM
HARDWARE
FmPONLINE.COM422
HARDWARE
coUNTER APPLIANcE LEGS• 3⁄8 -16 mounting stud
no. 119-1011 Black heat resistant plasticno. 119-1012 Gray heat resistant plastic
21⁄2" Min.1" Adj.
11⁄4"
coUNTER APPLIANcE LEGS WITH FLANGED FooT•3⁄8 -16 mounting studno. 119-1018 Zinc die-cast, satin nickel finishno. 119-1078 Black heat resistant plasticno. 119-1077 Chrome-plated heat resistant plastic
4" Min.13⁄4" Adj.
11⁄4"
coUNTER APPLIANcE LEGSno. 119-1017 Zinc die-cast, satin nickel finishno. 119-1015 Black heat resistant plasticno. 119-1016 Gray heat resistant plastic
•3⁄8 -16 mounting stud
no. 119-1080 Black heat resistant plastic•1⁄4 -20 mounting studno. 119-1010 Zinc die-cast, satin nickel finish•CommonlyusedonHobart(GE)•5⁄16 -18 mounting stud
4" Min.13⁄4" Adj.
11⁄2"
THREAD coNvERTERno. 119-1084
•Converts1⁄4 -20 thread to 3⁄8 -16 thread
APPLIANcE LEGS WITH FLANGED FooT•3⁄8 -16 mounting stud•8000lbloadcapacitypersetof4
no. 119-1082 Black thermoplastic with matte nickel foot
no. 119-1083 Nickel-plated thermoplastic with matte nickel foot
2"
4" Min.11⁄4" Adj.
APPLIANcE LEGS WITH FLANGED FooT•3⁄8 -16 mounting stud•8000lbloadcapacitypersetof4•Zincdie-cast
no. 119-1013 21⁄2" high•Satinnickelfinishno. 119-1081 4" high•Mattenickelfinish
Height1" Adj.
11⁄4"
SMALL LEGSno. 119-1009 Black plasticno. 119-1004 Chrome-plated plastic
•1⁄4 -20 mounting stud
no. 119-1079 Leg with non-skid foot•1⁄4 -20 mounting stud•Chrome-platedplastic
7⁄8"
1" Min.3⁄8" Adj.
lEgs
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 423
HARD
WAR
ESTAINLESS STEEL EqUIPMENT LEGS•Heightsareminimum•8000lbloadcapacitypersetof4•Satinfinish
no. 119-1026 4" high• 1⁄2 -13 mounting stud
no. 119-1102 4" high• 5⁄8-11 mounting stud
no. 119-1030 6" high• 1⁄2 -13 mounting stud
Height 11⁄2" Adj.
15⁄8"
lEgs
EqUIPMENT LEGS•8000lbloadcapacitypersetof4•Zincdie-castwithsatinnickelfinish•Stainlesssteelhexfootno. 119-1021 11⁄8" adjustment•1⁄2-13 mounting studno. 119-1022 1" adjustment•5⁄8-11 mounting studno. 119-1024 11⁄8" adjustment•5⁄8-11 mounting stud
6" Min.
23⁄8"
6" (152mm)Min.
25⁄8"(67mm)
31⁄2"(89mm)
EcoNoMy EqUIPMENT LEGS•Removablemountingplate•8000lb(3629kg) load capacity per set of 4•Zincdie-cast
no. 119-1075 Nickel finish •11⁄4" (32mm) height adjustment
no. 119-1076 Black epoxy finish•1"(25mm) height adjustment
EcoNoMy EqUIPMENT LEGS•1⁄2-13 mounting stud•8000lbloadcapacitypersetof4•Zincdie-castno. 119-1071 Nickel finishno. 119-1072 Gray epoxy finish no. 119-1073 Black epoxy finish
6" Min.7⁄8" Adj.
23⁄8"
bLAcK PLASTIc EqUIPMENT LEGS•8000lb(3629kg) load capacity per set of 4•Nickel-platedzamakfootwithnon-marring
plastic base1. no. 119-1088 5⁄8-11 mounting stud1. no. 119-1086 1⁄2-13 mounting stud2. no. 119-1090 1⁄2-13 mounting stud with
31⁄2" (89mm) square removable plate
1
2
6" Min.3⁄4" Adj.
23⁄8"
25⁄8"
31⁄2"
HARDWARE
FmPONLINE.COM424
HARDWARE
lEgs
6" (152mm) Min.
11⁄8" (29mm) Adj.
25⁄8"(67mm)
31⁄2"(89mm)
EqUIPMENT LEGno. 119-1035•Removablemountingplate•8000lb(3629kg) load capacity per set of 4•Zincdie-cast•Satinnickelfinish
Height Adj.
25⁄8"(67mm)
31⁄2"(89mm)
HeightAdj.
25⁄8"(67mm)
31⁄2"(89mm)
6" (152mm) Min.
13⁄4" (44mm) Adj.
25⁄8"(67mm)
31⁄2"(89mm)
STAINLESS STEEL EqUIPMENT LEGno. 119-1039
•Removablemountingplate•8000lb(3629kg) load capacity per set of 4•Satinfinish
STAINLESS STEEL EqUIPMENT LEGS•Removablemountingplate•8000lb(3629kg) load capacity per set of 4•Satinfinishno. 119-1085 6" (152mm) high•13⁄4" (44mm) height adjustmentno. 119-1045 4" (102mm) high•11⁄2" (38mm) height adjustment
6" (152mm) Min.
3" (76mm) Adj.
25⁄8"(67mm)
31⁄2"(89mm)
STAINLESS STEEL EqUIPMENT LEGno. 119-1040
•Foothasnylontip•Removablemountingplate•8000lb(3629kg) load capacity per set of 4•Satinfinish
STAINLESS STEEL EqUIPMENT LEG WITH REMovAbLE FooTno. 119-1025
• 1⁄2 -13 mounting stud•8000lbloadcapacitypersetof4•Satinfinish
12" Min.11⁄2" Adj.
15⁄8"
STAINLESS STEEL EqUIPMENT LEGS•Mountingplatesareweldedtolegs•8000lb(3629kg) load capacity per set of 4•Allheightsareminimum
no. 119-1041* 6" (152mm) high•11⁄2" (38mm) height adjustment
no. 119-1043 12" (305mm) high•11⁄8" (29mm) height adjustment
*Removable plate
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 425
HARD
WAR
E
STAINLESS STEEL EqUIPMENT LEGno. 119-1027
•3⁄4 -10 mounting stud•8000lbloadcapacitypersetof4•Satinfinish
6" Min.13⁄4" Adj.
23⁄4"
STAINLESS STEEL EqUIPMENT LEGno. 119-1028
•Foothasnylontip•3⁄4 -10 mounting stud•8000lb load capacity per set of 4•Satinfinish
6" Min.3" Adj.
2"
lEgs
MoUNTING PLATEno. 119-1036
•1⁄2 -13 thread•31⁄2" x 31⁄2" plate•25⁄8" screw centers•Zinc-platedsteel
LEG SocKETS1. weld mounted
no. 119-1069 Steel no. 119-1068 Stainless steel
•For11⁄4" pipe, 11⁄2" or 15⁄8" OD tubing
2. Plate mounted
no. 119-1067 Stainless steel •For11⁄4" pipe, 11⁄2" or 15⁄8" OD tubing •31⁄2" x 31⁄2" plate •25⁄8" screw centers
2
1
Height11⁄4" (32mm)
Adj.
25⁄8"(67mm)
31⁄2"(89mm)
STAINLESS STEEL LoNG LEG ASSEMbLIES•15⁄8" OD•Usedmostlyfortables•8000lb(3629kg) load capacity
per set of 4•Canbeeasilycuttoshorterlengths•Satinfinishno. 119-1000 18" (457mm) highno. 119-1001 24" (610mm) highno. 119-1002 32" (813mm) highno. 119-1003 36" (914mm) high
STAINLESS STEEL EqUIPMENT LEGS•8000lbloadcapacitypersetof4•Stainlesssteelwithnon-markingnylon
flanged toeno. 119-1098 1⁄2-13 mounting stud•4"loadheight•11⁄2" height adjustment•15⁄8" ODno. 119-1099 5⁄8-11 mounting stud•6"loadheight•23⁄4" height adjustment•2"OD
HeightAdjustment
OD
HARDWARE
FmPONLINE.COM426
HARDWARE
WIDE FLANGE bULLET FooTno. 119-1062 •For15⁄8" OD round tubing•11⁄32" holes on 21⁄2" centers•11⁄2" to 23⁄4" height adjustment•31⁄2" flange diameter•Stainlesssteel
HI-RISE™ WIDE FLANGE bULLET FooTno. 119-1095
•DesignedtomeetpendingOSHA requirements
•For15⁄8 " OD tubing•11⁄32" holes on 21⁄2" hole
centers•11⁄2" to 41⁄2" height
adjustment•31⁄2" flange diameter•2000lbloadcapacity•Stainlesssteel
FLANGED bULLET FooTno. 119-1100•For15⁄8" OD tubing•11⁄2" to 25⁄8" height adjustment•31⁄2" flange diameter•2000lbloadcapacity•IncludesPosi-Griplockingring•Stainlesssteel
bULLET FooTno. 119-1101•For15⁄8" OD tubing•11⁄2" to 25⁄8" height adjustment•2000lbloadcapacity•Stainlesssteel
bULLET FooTno. 119-1103•For15⁄8" OD tubing•11⁄2" to 21⁄2" height adjustment•2000lbloadcapacity•Blackplastic
HI-RISE™ bULLET FooTno. 119-1093
•DesignedtomeetpendingOSHA requirements
•For15⁄8 " OD tubing•11⁄2" to 41⁄2" height
adjustment•2000lbloadcapacity•Stainlesssteel
STAINLESS STEEL TUbING•10'long•Satinfinishno. 135-1189 1" ODno. 135-1217 15⁄8" OD
Note: 10' lengths ship by truck. Can be cut at your request. Cutting charges apply.
KIcK PLATE SPRING cLAMPno. 119-1063
•Forattachingkickplatetoequipmentleg•Fitssnuglyon11⁄4" pipe, 11⁄2", 15⁄8" or 2"
OD tubing
13⁄4"21⁄2"
coRNER bRAcKETno. 135-1260•For15⁄8" OD round tubing•Providesstrongandsecureundershelfsupport
BullEt fEEt AnD ACCEssoRiEs
FLANGED FooTno. 119-1104•For1"(25mm) OD square or round tubing•Adjustablefrom3⁄4" to 11⁄2" (19mm to 38mm)•13⁄16" flange diameter•Nickel-plated
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 427
HARD
WAR
E
bULLET FEET FoR RoUNDTUbING AND PIPE
Gray PlastIC•13⁄8" to 27⁄16" height adjustment•2000lbloadcapacity
no. 119-1050 For 11⁄4" pipeno. 119-1054 For 15⁄8" OD tubing
ZInC dIe-Cast•11⁄4" to 23⁄8" height adjustment•2000lbloadcapacity
no. 119-1049 For 11⁄4" pipeno. 119-1053 For 15⁄8" OD tubing
staInless steel
no. 119-1051 For 11⁄4" pipe•11⁄2" to 25⁄8" height adjustment•2000lbloadcapacity
no. 119-1055 For 15⁄8" OD tubing•11⁄8" to 21⁄4" height adjustment•2000lbloadcapacity
no. 119-1052 For 2" OD tubing•1"to3"heightadjustment•2400lbloadcapacity
Note: Bullet feet for 11⁄4" pipe will also fit 11⁄2" OD tubing.
bULLET FEET FoR SqUARE TUbING AND PIPE
nICkel-Plated
no. 119-1056 For 1" OD square tubing
• 11⁄16" to 19⁄16" height adjustment•1200lbloadcapacityZInC dIe-Cast•2000lbloadcapacity
no. 119-1057 For 11⁄4" OD square tubing•1"to2"heightadjustment
no. 119-1058 For 11⁄2" OD square tubing•11⁄4" to 23⁄8" height adjustment
staInless steel•2000lbloadcapacity
no. 119-1059 For 11⁄2" OD square tubing•11⁄2" to 25⁄8" height adjustment
no. 119-1060 For 2" OD square tubing•1"to3"heightadjustment
nAil-on gliDEs
WooD fuRnituRE gliDEs
NAIL-oN GLIDES FoR WooDEN FURNITURE
metal wItH rubber CusHIon
1. no. 121-1033 7⁄8" (22mm) base diameter1. no. 121-1034 11⁄16" (27mm) base diameter1. no. 121-1035 11⁄2" (38mm) base diameter
nylon wItH rubber CusHIon
2. no. 121-1160 11⁄8" (29mm) base diameter
nICkel-Plated base
3. no. 121-1037 3⁄4" (19mm) base diameter
PlastIC base
4. no. 121-1038 1⁄2" (13mm) base diameter 4. no. 121-1039 3⁄4" (19mm) base diameter
BullEt fEEt
bULLET FEET•11⁄2" to 23⁄4" height adjustment•1000lbloadcapacity•Grayplasticbodywithstainlesssteel
clad footno. 119-1097 For 11⁄2" OD round tubingno. 119-1096 For 15⁄8" OD round tubing
NAIL-oN SELF LEvELING GLIDEno. 121-1132
•Automaticallycompensatesforuneven floors
•Adjustsupto3⁄8" (10mm)•17⁄16" (37mm) base diameter plastic cap
SELF-LEvELING FoREvER GLIDES® FoR WooD FURNITUREMade from Delrin®, a lightweight, low-friction, wear-resistant plastic, these Forever Glides® are virtually indestructible and an economical way to eliminate chair and table wobble. Because Delrin will not grab or hold dirt, furniture can be moved easily without risk of floor damage.•Consistsofaretainingcup,foamleveling
cushion, and reinforced plastic body•Durableandweatherproof•Packof4
dark oak Colorno. 121-1156 1" diameterno. 121-1157 11⁄4" diameter
natural wood Colorno. 121-1158 1" diameterno. 121-1159 11⁄4" diameter
1
2
3
4
HARDWARE
FmPONLINE.COM428
HARDWARE
supERlEvEl® gliDEs
SUPERLEvEL® SELF-ADjUSTING GLIDES •Safeforindoorandoutdooruse•11⁄8" base diameter•Adjustsupto1⁄4"•500lbloadcapacitypersetof4
sold IndIvIduallyno. 121-1022 1⁄4-20 threadno. 121-1121 3⁄8-16 thread
sold In multIPlesno. 121-1143 Pack of 4•1⁄4-20 threadno. 121-1144 Point of purchase display box•1⁄4-20 thread•Includes18packsof4
SUPERLEvEL® II SELF-ADjUSTING GLIDES •Idealfornon-screw-inapplications,like
countertop appliances•Safeforindoorandoutdooruse•Allweather3M™VeryHighBond(VHB™)
adhesive pad•11⁄8" (29mm) base diameter•Adjustsupto1⁄4" (6mm)•500lbloadcapacitypersetof4no. 121-1153 Individualno. 121-1154 Pack of 4no. 121-1155 Point of purchase display box•Includes18packsof4
guaranteed to keep tables and equipment steady without damaging floors. Automatically adjusts tables to uneven floors, even when a table is moved repeatedly.
no manual adjustment is necessary.
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 429
HARD
WAR
E
tABlE sHox® gliDEs
WoBBlE WEDgEs®
TAbLE SHoX® SELF-ADjUSTING GLIDESThe “Automatic” wobbly table solutionHydraulics makes them 100% automatic so they readjust every time a table is moved. Fully enclosed design prevents crumbs and such from hindering performance. Patented swivel increases stability and even works on grout lines. Safe on any floor surface, indoor or outdoor.•11⁄2" base diameter•Adjustsitselfupto5⁄16"•400lbloadcapacitypersetof4•Easyinstallation—notoolsrequiredno. 121-1149 5⁄16 -18 thread glideno. 121-1150 3⁄8 -16 thread glide
TAbLE SHoX® PoINT oF PURcHASE DISPLAy boXno. 121-1148•Includes18packsof4(No.121-1147)
PAcK oF 4 TAbLE SHoX® no. 121-1147
•1⁄4-20 thread
WobbLE WEDGES®
A little cure for a big problem! Stop wobbly tables quickly and easily. Great for use on tile and uneven floors. Use under equipment, furniture, and just about anything that wobbles or tilts.•Interlockingandstackable•Patentno.4830320
transluCent wedGes•Hardnylonno. 280-1174 Pack of 30no. 280-1234 Jar of 75no. 280-1176 Jar of 300
Hard blaCk wedGes•Hardpolypropyleneno. 280-1636 Jar of 75no. 280-1710 Jar of 300
FlexIble blaCk wedGes•Softvinyl•Absorbsvibrationno. 280-1635 Jar of 75no. 280-1709 Jar of 300
PoInt-oF-PurCHase dIsPlay boxes•Includespre-assembledcardboardbinwith
header and 12 plastic jars of 30 wedgesno. 280-1730 Translucent hard nylon wedgesno. 280-1731 Black soft vinyl wedges
HARDWARE
FmPONLINE.COM430
HARDWARE
gliDEs
THREADED SELF-LEvELING GLIDE1. no. 121-1019
•Automaticallycompensates for uneven floors
• 1⁄4 -20 x 5⁄16" thread•Adjustsitselfupto3⁄8"
2. no. 121-1020 Plastic cap•11⁄4" base diameter
ALL-METAL bASE WITH INTERNAL cUSHIoNno. 121-1012 1⁄4 -20 thread•11⁄4" stud height•11⁄8" base diameter
no. 121-1014 5⁄16 -18 thread•11⁄4" stud height•11⁄8" base diameter
no. 121-1013 3⁄8 -16 thread•11⁄2" stud height•11⁄8" base diameter
HEAvy-DUTy PLASTIc bASE no. 121-1016 1⁄4 -20 thread•1"studheight•13⁄8" base diameter
no. 121-1018 5⁄16 -18 thread•11⁄2" stud height•13⁄8" base diameter
no. 121-1017 3⁄8 -16 thread•11⁄2" stud height•13⁄8" base diameter
PLASTIc bASEno. 121-1007 1⁄4 -20 thread
•1"studheight•1"basediameter
PLASTIc SWIvEL bASEno. 121-1000 1⁄4 -20 thread
•1"studheight•15⁄16" base diameter
METAL bASE WITH cUSHIoNno. 121-1006 1⁄4 -20 thread•1⁄2" stud height•7⁄8" base diameter
no. 121-1004 1⁄4 -20 thread•1"studheight•7⁄8" base diameter
no. 121-1005 1⁄4 -20 thread•1"studheight•11⁄8" base diameter
PLASTIc bASE no. 121-1008 1⁄4 -20 thread•1⁄2" stud height•11⁄8" base diameter
no. 121-1010 1⁄4 -20 thread•3⁄4" stud height•11⁄8" base diameter
no. 121-1011 5⁄16 -18 thread•1"studheight•11⁄8" base diameter
SUcTIoN cUP FooTno. 176-1032 8-32 thread
•1⁄2" stud height•13⁄8" base diameter
1
2
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 431
HARD
WAR
E
STAcK cHAIR GLIDEno. 121-1040
•Fitsinsidestandard13⁄16" OD square tubular legs
•Plastic
vINyL booT GLIDEno. 121-1023
•For13⁄16" OD square tubular legs•15⁄16" diameter swivel base
NoN-SLIP NEoPRENE bASE
1. no. 121-1115 • 1⁄4-20 thread•11⁄2" stud height•13⁄8" base diameter
1. no. 121-1117 • 3⁄8-16 thread•11⁄2" stud height•13⁄8" base diameter
2. no. 121-1116 • 5⁄16-18 thread•11⁄2" stud height•17⁄16" base diameter•Nutincluded
NoN-SLIP NEoPRENE bASEno. 121-1118 •1⁄4 -20 thread•1"studheight•11⁄8" base diameter
no. 121-1119 •5⁄16 -18 thread•11⁄2" stud height•11⁄8" base diameter
no. 121-1120 •3⁄8 -16 thread•11⁄2" stud height•11⁄8" base diameter
FLUSH GLIDES•Forroundtubularlegs•11⁄16" diameter swivel baseno. 121-1027 For 3⁄4" OD legsno. 121-1026 For 1" OD legs
gliDEs
LoNG METAL booT GLIDES•Commonlyusedonschoolfurniture•For5⁄8" OD round tubular legs•11⁄4" diameter swivel baseno. 121-1032 Metal baseno. 121-1126 Nylon base
METAL booT GLIDES•Forroundtubularlegs•11⁄16" diameter swivel base
no. 121-1031 For 7⁄8" OD legsno. 121-1029 For 1" OD legs
METAL booT GLIDEno. 121-1024
•For1"ODsquare tubular legs
•11⁄4" base diameter
FLUSH GLIDEno. 121-1025
•For13⁄16" OD square tubular legs
•11⁄16" diameter swivel base
THREADED INSERTS FoR SqUARE TUbING•Forusewithlevelers•1⁄4 -20 thread
no. 121-1050 For 1" OD tubingno. 121-1051 For 11⁄4" OD tubing
THREADED INSERTS FoR RoUND TUbING•Forusewithlevelers•1⁄4 -20 threadno. 121-1057 For 7⁄8" OD tubingno. 121-1055 For 1" OD tubing
Note: most table bases use 1⁄4-20 thread.
1
2
HARDWARE
FmPONLINE.COM432
HARDWARE
WHITE RUbbER cRUTcH TIPS
no. 121-1045 For 7⁄8" OD tubing
no. 121-1041 For 1" OD tubing
no. 121-1043 For 11⁄8" OD tubing
no. 121-1042 For 11⁄4" OD tubing
bLAcK RUbbER cRUTcH TIPSno. 121-1139 For 7⁄8" OD tubing
no. 121-1140 For 1" OD tubing
no. 121-1141 For 11⁄8" OD tubing
no. 121-1142 For 11⁄4" OD tubing
RoUND oUTSIDE cAPS•Fitsoverthetubingend•Blackplastic
no. 121-1065 For 3⁄4" OD tubing
no. 121-1069 For 7⁄8" OD tubing
no. 121-1058 For 1" OD tubing
no. 121-1061 For 11⁄8" OD tubing
no. 121-1060 For 11⁄4" OD tubing
no. 121-1059 For 11⁄2" OD tubing
no. 121-1064 For 15⁄8" OD tubing
RoUND INSIDE cAPS•Fitsinside18gaugetubing•Blackplastic
no. 121-1090 For 1" OD tubing
no. 121-1092 For 11⁄4" OD tubing
SqUARE oUTSIDE cAPno. 121-1070
•Fitsoverthetubingend•For1"ODtubing•Blackplastic
SqUARE INSIDE cAPS•Fitsinside18gaugetubing•Blackplasticno. 121-1086 For 3⁄4" OD tubing
no. 121-1076 For 1" OD tubingno. 121-1078 For 11⁄4" OD tubing
STAcK cHAIR bUMPERno. 121-1074
•Fits1⁄4" (6mm) hole•Plastic
INSIDE END cAPS•Fitsinside18gaugetubing•Blackplasticno. 121-1098 For 3⁄4" OD tubingno. 121-1100 For 7⁄8" OD tubing
END cAPno. 121-1088 •For7⁄8" OD tubing•Fitsinside18gaugetubing•Blackplastic
END cAP FoR SqUARE TUbINGno. 121-1112
•Nickel-platedsteel•For 1" OD tubing
END cAPS FoR RoUND TUbING•Nickel-platedsteel
Item FIts FItsno. od tubInG Hole sIZe
121-1106 1⁄2" 3⁄8"121-1110 5⁄8" 1⁄2"121-1109 3⁄4" 5⁄8"121-1111 7⁄8" 3⁄4"121-1103 1" 7⁄8"121-1104 11⁄2" 13⁄8"
EnD CAps
mAgiC sliDERs™Magic Sliders make heavy equipment or furniture feel like it’s on casters. The Teflon® face of the sliders works on any floor surface–even carpet–so moving even the largest unit is easy. And Magic Sliders won’t scratch or damage floors.
no. 121-1135•Nail-on•Diameter7⁄8" (22mm)•Simplynailretainertolegandattachslider•Forchairsandtableswithwoodenlegs•Loadcapacity1600lb(726kg) per set of 4•Packof8
Nail On
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 433
HARD
WAR
E
RoLLERS•1⁄4" diameter removable studItem no. materIal a b C d132-1026 Zinc-plated steel 1" 7⁄32" 3⁄8" 1⁄8"
132-1027 Zinc-plated steel 15⁄16" 5⁄16" 3⁄8" 1⁄8"
132-1029 Steel with nylon tire 1" 7⁄32" 3⁄8" 1⁄8"
132-1028 Stainless steel 29⁄32" 1⁄4" 3⁄8" 1⁄8"
B
C D
A
RoLLERS•Rolleriscountersunkfor1⁄4" flat head machine screwItem no. materIal a b C d
132-1005 Zinc-plated steel 1" 5⁄16" 3⁄8" 1⁄4"
132-1010 Zinc-plated steel 15⁄16" 5⁄16" 3⁄8" 1⁄4"
132-1006 Steel with nylon tire 1" 7⁄32" 9⁄32" 1⁄4"
132-1009 Stainless steel 15⁄16" 5⁄16" 3⁄8" 1⁄4"
A
C
D
1⁄4"
RoLLERno. 132-1020
•1⁄4 -20 threaded stud•Stainlesssteel
5⁄16"
29⁄32"
3⁄4"
RoLLERS•1⁄4-20 threaded removable stud
Item no. materIal a b C d
132-1022* Zinc-plated steel 15⁄16" 5⁄16" 9⁄16" 3⁄8"
132-1024 Steel with nylon tire 1 7⁄32" 3⁄8" 3⁄8"
132-1023* Stainless steel 29⁄32" 1⁄4" 5⁄16" 5⁄16"
132-1021 Stainless steel 29⁄32" 1⁄4" — 3⁄8"
*Roller with non-removable stud
B
C D
A
B
RollERs
HARDWARE
FmPONLINE.COM434
HARDWARE
RoLLER WITH RUbbER TIREno. 132-1033
•Holeiscountersunkforflatheadscrew•Zinc-platedsteel
RoLLER WITH RUbbER TIREno. 132-1032
•1⁄4 -20 threaded stud•Zinc-platedsteel
15⁄16"
5⁄16"
3⁄8"
3⁄8"
15⁄16"
5⁄16"
1⁄4"
3⁄8"
RoLLERno. 132-1088
•CommonlyusedonSavoryandHatco•Steelwithblackfinish
11⁄16"1⁄16"
13⁄16"3⁄32"3⁄32"
RoLLERno. 132-1093
•Skatewheel-type•5⁄8" W x 115⁄16" OD •1⁄4" diameter hole•Zinc-platedsteel
RoLLERno. 132-1054
•Skatewheel-type•5⁄8" W x 115⁄16" OD •1⁄4" diameter hole•Zinc-platedsteel
1" 3⁄8" 29⁄32"
3⁄8"
RollERs
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 435
HARD
WAR
E
RollERs
coNvEX RoLLERno. 132-1052
•CommonlyusedonTraulsen•1⁄4 -20 threaded stud•Stainlesssteel
11⁄16"
3⁄8" 3⁄16" 5⁄16"
coNvEX RoLLERno. 234-1026
•CommonlyusedonVictory•1⁄4 -28 threaded stud•Stainlesssteel
5⁄16"
3⁄8"
1⁄4"13⁄16"
coNcAvE RoLLERno. 132-1008
•Holeiscountersunkfor1⁄4" flat head machine screw•Zinc-platedsteel
coNcAvE RoLLERno. 132-1031
•1⁄4 -20 threaded stud•Zinc-platedsteel
13⁄16"
5⁄16"
3⁄4"
3⁄8"
11⁄16"
1⁄4"1⁄8"
5⁄16"
HARDWARE
FmPONLINE.COM436
HARDWARE
SINGLE RoLLERno. 132-1053
•Commonlyusedondelicases•Fits9⁄16" groove• 1⁄2" diameter stainless steel roller
boTToM MoUNT SHEAvEno. 132-1047 •Concaveroller•23⁄4" long•25⁄16" screw centers• 5⁄16" x 13⁄8" OD•Zinc-platedsteel
Replacement rollers for specific equipment
are listed by the manufacturer's name in the parts section.
DRAWER SLIDES•Loadcapacityat18"(457mm): zinc-plated steel–75 lb (34kg) stainless steel–150 lb (68kg)•Zinc-platedsteelslideshavenylonball
bearing rollers•Stainlesssteelslideshavestainlesssteelball bearing rollers•Soldbythepair
ZInC-Plated staInless steel steel lenGtH132-1057 132-1062 20" (508mm)132-1058 132-1063 22" (559mm)132-1059 132-1064 24" (610mm)132-1060 26" (660mm)
Cabi
net S
ide
Draw
er S
ide
3"(76mm)
1⁄2"(13mm)
bALL bEARING DRAWER SLIDES•Fullballbearingslides•Slideextendsfulllengthforeasydrawerremoval•Loadcapacityat18"(457mm):
slides with nylon roller–75 lb (34kg) slides with metal roller–125 lb (57kg)
•Zinc-platedsteel•Soldbythepair
slIde wItH slIde wItH nylon roller metal roller lenGtH
132-1035 18" (457mm) 132-1066 132-1036 20" (508mm) 132-1037 22" (559mm) 132-1038 24" (610mm)
no. 132-1070 Replacement nylon rollerno. 132-1034 Replacement metal roller
REMovAbLE DRAWER SLIDES•Slidesareeasilyremovedforcleaningby tilting and lifting out•Eachpaircontains8removablerollers•Loadcapacityat20"(508mm) is 200 lb (91kg)•Stainlesssteel•Soldbythepairno. 132-1071 20" (508mm) longno. 132-1072 22" (559mm) longno. 132-1073 24" (610mm) longno. 132-1074 26" (660mm) long
no. 132-1052 Replacement stainless steel roller
23⁄32"(53mm)
61⁄64"(24mm)
3⁄4"(19mm)
Draw
er S
ide
Cabi
net S
ide
Cabi
net S
ide
25⁄8"(67mm)
25⁄32"(20mm)
Draw
er S
ide
DRAWER sliDEs
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 437
HARD
WAR
E
13⁄4"(44mm)
11⁄4"(32mm)
Front Sheave
Rear Sheave
TRAcKno. 134-1064
•Commonlyusedon Jordon/Fogel and others
•50"(1270mm) long•Extrudedaluminum
DooR SHEAvES•ForusewithdoortracksNos.134-1048
and 134-1049 1. Front no. 134-1055 Steel wheel no. 134-1056 Steel wheel with nylon tire2. rear no. 134-1057 Steel wheel no. 134-1058 Steel wheel with nylon tire
SANITARy ovERHEAD TRAcKS•Forusewithdoorsheaves•Extrudedaluminumno. 134-1048 48" (1219mm) longno. 134-1049 72" (1829mm) long
Note: Sheaves not included.
7⁄32"(6mm)
9⁄32"(7mm)
7⁄16"(11mm)
15⁄16"(24mm)
7⁄8"(22mm)
3⁄8"(10mm)
3⁄8"(10mm)
1 2
5⁄8"(16mm)
13⁄16"(30mm)
3⁄16"(5mm)
GLASS cAPPINGno. 135-1129
•6'(1829mm) long•Taperedchannelfor1⁄4" (6mm) glass•Stainlesssteel
SLIDING DooR DoUbLE cHANNELno. 134-1063
•6'(1829mm) long•Extrudedaluminum
DooR PINno. 134-1059 •Push-downguidepin•Fits5⁄16" (8mm) hole•Stainlesssteel
DooR HARDWARE
HARDWARE
FmPONLINE.COM438
HARDWARE
oFFSET GRIP PULLno. 132-1042
•43⁄4" overall length•27⁄16" overall width•4"screwcenters•10-24mountingstuds•Stainlesssteel
HEAvy-DUTy TUbULAR PULLS•Overalllengthis7⁄8" more than
screw centers•25⁄8" projection• 1⁄4-20 thread• 7⁄8" OD stainless steel with heat
resistant plastic stand-offsno. 134-1052 12" screw centersno. 134-1053 18" screw centers
RoUND PULLno. 132-1043
•43⁄4" diameter•Three10-24mountingstuds•Stainlesssteel
DUAL ScREW cENTER PULLno. 141-1092
•315⁄16" overall length•23⁄4" or 3" screw centers•8-32thread•Chrome-plated,zincdie-cast
PULLno. 134-1050
•43⁄4" overall length•31⁄2" screw centers•10-24thread•Chrome-plated,zincdie-cast
PULLno. 132-1090
•43⁄4" overall length•4"screwcenters•10-24thread•Chrome-plated,zincdie-cast
PULLno. 132-1091
•43⁄4" overall length•4"screwcenters•10-24threadedbrassinserts•Blackplastic
PULLno. 132-1092
•41⁄2" overall length•4"screwcenters•8-32thread•Includes2screws•Satinfinishaluminum
PULLno. 132-1041
•41⁄4" overall length•4"screwcenters•8-32thread•Stainlesssteel
PULLno. 132-1039
•57⁄8" overall length•43⁄4" x 1" screw centers•Chrome-plated,zincdie-cast
PULLno. 124-1148
•57⁄8" overall length•5"screwcenters•1⁄4 -20 thread•Offsethandle•Chrome-plated,zincdie-cast
pulls
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 439
HARD
WAR
E
bRASS-PLATED STEEL HINGEno. 134-1001
•41⁄2" x 41⁄2" (114mm x 114mm)•Lubricatedballbearingglides•Soldinpairs
STAINLESS STEEL HINGES•Soldinpairs
no. 134-1078 31⁄2" x 31⁄2" (89mm x 89mm)no. 134-1079 41⁄2" x 41⁄2" (114mm x 114mm)
coNTINUoUS HINGES•72"(1.8M) long•Stainlesssteelwithstainlesssteelpin
oPen PIn Item no. wIdtH tHICkness dIa.134-1111 11⁄16" .035" .085" (27mm) (0.9mm) (2.2mm)
134-1112 11⁄16" .042" .091" (27mm) (1.1mm) (2.3mm)
134-1113 11⁄2" .042" .091" (38mm) (1.1mm) (2.3mm)
134-1115 2" .042" .091" (51mm) (1.1mm) (2.3mm)
134-1116 2" .062" .125" (51mm) (1.6mm) (3.2mm)
LIFT-oFF HINGES•11⁄4" overall width x 2" high (32mm x 51mm) •1⁄8" (3mm) pin diameter•16gaugestainlesssteel
no. 134-1085 Right-handno. 134-1084 Left-hand (not shown)
HEAT RESISTANT EDGEMoUNT HINGEno. 123-1227
•Heavy-duty,canbeusedonheatedcabinets• 13⁄16" (21mm) offset•Offsetisadjustable3⁄16" (5mm)•5"Lx15⁄16" W (127mm x 24mm)•11⁄16" (27mm) screw centers•Chrome-platedsolidbrass•CHGno.R42•Kasonno.1216sPrInG kItno. 123-1222•Convertsabovehingetospring-assisted
DoUbLE-AcTIoN SPRING HINGES•Soldinpairs•Brass-lacqueredsteel
Plate For doorItem no. HeIGHt tHICkness134-1080 3" 3⁄4" to 11⁄8" (76mm) (19mm to 29mm)
134-1081 4" 3⁄4" to 11⁄8" (102mm) (19mm to 29mm)
134-1082 5" 1" to 11⁄4" (127mm) (25mm to 32mm)
134-1083 6" 11⁄4" to 13⁄4" (152mm) (32mm to 44mm)
A
PIvoT HINGES•35⁄16" (84mm) high•Nickel-platedsteel
no. 123-1199 15⁄8" (41mm)“A”dimensionno. 123-1198 17⁄8" (48mm)“A”dimension
HingEs
HARDWARE
FmPONLINE.COM440
HARDWARE
bARRIER-FREE, DELAyED AcTIoN DooR cLoSERS•Openingforceandclosingspeedcanbeadjustedtoalloweasypassage•Closerisadjustablefrom1⁄2 to #4•Separateadjustmentsforthefollowing: Closing speed Closing delay Latching speed Backcheck control•Foruseonleft-orright-handdoors•Includesparallelarmbracketandcover•9⁄16" x 111⁄8" x 11⁄8" (14mm x 283mm x 29mm) screw centers
no. 134-1128 Aluminum finishno. 134-1129 Dark brown finish
HyDRAULIc DooR cLoSERS•#4closer•Separateadjustmentsforclosingandlatchingspeeds•Foruseonleft-orright-handdoors•Fordoorsupto165lb(75kg)•3⁄4" x 91⁄8" (19mm x 232mm) screw centers
no. 134-1120 Aluminum finishno. 134-1121 Dark brown finish
aCCessorIes
Parallel arm braCkets•Parallelarmbracketsallowdoorclosersto
be mounted as shown in drawing
no. 134-1009 Aluminum finishno. 134-1008 Dark brown finish
ADjUSTAbLE DooR cLoSERSThese heavy-duty closers are very versatile. They contain adjustments for mounting in just about any situation.
•Closerisadjustablefrom#1to#6•ADAcompliantatlowersetting•Separateadjustmentsforclosingandlatchingspeeds•Adjustablebacksetcontrolvalve•Foruseonleft-orright-handdoors•Includesparallelarmbracket•9⁄16" x 111⁄8" (14mm x 283mm) screw centers
no. 134-1118 Aluminum finishno. 134-1119 Dark brown finishno. 134-1125 Polished brass
coNvEX MIRRoRS•Helpreducepilferageandblindintersectionaccidents•Swivelmount•Durableacrylicplasticconstruction
outsIde InsIde dIstanCeuse use dIameter Covered
280-1071 280-1073 13" (330mm) 12' (3.7M)280-1072 280-1074 18" (457mm) 17' (5.2M) 280-1186 26" (660mm) 24' (7.3M)
PARTS FoR coNvEX MIRRoRSExtends the convex mirror’s range of motion so that it can be tailored to meet most customers’ needs. Also allows ceiling and counter mounting of mirrors.
1. no. 280-1224 Base plate2. no. 280-1225 Channel
21
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 441
HARD
WAR
E
MAGNETIc SWITcH no. 134-1133• Forusewithexitalarm
(No. 134-1165)• Canbeusedonaluminum,steel,
and wood doors and frames• Allowsexitalarmtoberemotely
hooked up to 1 or 2 doors• Thermoplasticcase• Detexno.MS2049S
1 door
2 doors
EMERGENcy EXIT ALARMno. 134-1143•Signalsunauthorizeduseofemergencyexits•100+decibelalarm•Batteryoperated;noexternalwires•Foruseonstandard36"(914mm)left-orright-handdoors;
can be cut to any length•Tamperresistantprotectivehousing•Easytoinstallandsimpletouse•Detexno.V40XEBPartsno. 134-1144 Optional cylinder lock with keys
*ImporTANT: Installation of Nos. 134-1051 or 134-1144 cylinder lock into alarm case is necessary to lock and unlock door bolt and also to arm or disarm alarm from inside the building.
If ability to lock or unlock door bolt and arm or disarm alarm from outside of building is necessary, an additional No. 134-1051 or 134-1144 cylinder lock must be purchased.
AlARms by DEtEx®
EMERGENcy ALARMno. 134-1041 •Combinationdoorlockandalarmdetersunauthorizedentrancefrom
outside while allowing emergency exit from inside*•Highdecibelalarmhorn•Battery-operated,noexternalwires•9voltbatteryincluded•Foruseonleft-orright-handdoors•Rugged,die-castcasewithsawresistantboltassembly•Includescoverlockwhichprotectsinternalalarmmechanism•Easytoinstallandsimpletouse•Detexno.ECL230DParts no. 253-1242 Replacement 9 volt batteryno. 134-1051 Optional alarm control cylinder lock with keysno. 134-1139 Replacement emergency exit paddle bar plateno. 134-1163 Cylinder lock with 2 keysno. 134-1142 Conversion kit•Usedtoretrofitalarmsusing6voltlanternbattery•Changesalarmfromhorntosiren•Includes9voltbattery,siren,mountinghardware,andinstructions
EMERGENcy EXIT ALARMno. 134-1165•Signals unauthorized use of emergency exits•Forright-orleft-handdoors•Battery-operated,noexternalwires•2alarmstatusLEDs(1red,1green)•Includesplastictemplate,2keys,
warning sticker, mounting hardware, and 9 volt battery
•711⁄16" L x 23⁄32" W x 23⁄8" D (195mm x 53mm x 60mm)
•Graytexturedplastichousing•Detexno.EAX500no. 134-1144 Optional cylinder lock with key
DETEX
DETEX
10YEARW
ARRANTY
10YEARW
ARRANTY
3YEARW
ARRANTY
HARDWARE
FmPONLINE.COM442
HARDWARE
pAniC Exit AlARms
SoLID DooR PANIc EXIT bARS•Fordoorswith34"(864mm) clear openings
and wider•Canbecutfordoorswithclearopeningsas
narrow as 25" (635mm)•Foruseonleft-orright-handdoors•Includesstrike
no. 134-1088 Aluminum finishno. 134-1028 Dark brown finish
coMMERcIAL-DUTyENTRy DooR LocKSETno. 134-1098 •Adjustablefordoors
13⁄8" to 13⁄4" (35mm to 44mm) thick•23⁄8" (60mm) backset•Fits21⁄8" (54mm) hole for lock, 7⁄8" (22mm) for latch•Stainlesssteel
LEvER LocKSET FoR PANIc bARSno. 134-1132 •Allowsexterioraccesswithkey•MeetsADArequirements•Canbeusedonthefollowingpanicbars:
Nos. 134-1028 and 134-1088
LEvER LocKSETS•MeetsADA,ULrequirements• Insideandoutsideleverhandleswork
independently of each other•Adjustablefordoors
13⁄8" to 13⁄4" (35mm to 44mm) thick•Reversible1⁄2" (13mm) throw dead latch•Adjustablefaceplateforflatorbeveleddoors•Satinchrome-platedno. 134-1131* Privacy lockset with push lockno. 134-1130 Passage lockset without lock
* Includes thru-bolt kit
DooR HARDWARE
MAXIMUM SEcURITy PANIc HARDWARE by ARM-A-DoRno. 134-1134 •Automaticre-lockwithalarm•Deliversallthebenefitsofdrop-barsecurity•Fitsdoorsfrom36"to48"(914mm to 1219mm)•11⁄2" (38mm) 11 gauge steel tube construction•Rollerdesigndeadboltreducesfriction•Touchbaroperatesinastraight,
push-through motion•Standard11⁄8" (29mm) mortise lock required
(not included)•Two 9 volt batteries includedno. 134-1137 11⁄8" (29mm) mortise lock•ForusewithNo.134-1134no. 253-1242 Replacement 9 volt battery
LEvERSET WITH FLAIR LEvER HANDLESno. 134-1166•Foruseoninteriordoorsfrom13⁄8" to 13⁄4"
(35mm to 44mm) thick•23⁄8" (60mm) and 23⁄4" (70mm) backsets•Brass-plated
1YEARW
ARRANTY
1YEARW
ARRANTY
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 443
HARD
WAR
E
LoNG SHAcKLE bRASS PADLocKS•Idealforrefrigeratorlatches•Include2keyseach•Locksarenotkeyedalikeno. 134-1117 11⁄2" (38mm) padlock• 1⁄4" (6mm) diameter hardened steel shackle
measures 3" (76mm) inside height x 25⁄32" (20mm) inside width when closed
no. 134-1054 13⁄4" (44mm) padlock• 5⁄16" (8mm) diameter solid brass shackle measures
3" (76mm) inside height x 29⁄32" (23mm) inside width when closed
STAINLESS STEEL HASPno. 134-1109
•41⁄2" (114mm) long•11⁄2" (38mm) wide
EDGEMoUNT LocK WITH KEEPERno. 124-1130 •Easytoinstall•Suppliedwithcapstocovermountingholes•Lock: 2"Lx3⁄4" W x 1" D (51mm x 19mm x 25mm) 11⁄4" (32mm) screw centers•Keeper: 2"Lx3⁄4" W x 1⁄2" D (51mm x 19mm x 13mm)
17⁄16" (37mm) screw centers•Includeskey•Chrome-platedno. 124-1310 Blank key
LocKING HASPno. 134-1025
•41⁄2" (114mm) long•11⁄8" (29mm) wide•Chrome-platedsteel
TRIPLE-joINTED HASPno. 134-1027
•Idealforoffsetdoors•73⁄4" (197mm) long•13⁄4" (44mm) wide•Zinc-platedhardenedsteel
SLIDING GLASS DooR LocKno. 134-1067 •Forframedglassdoorsupto5⁄8" (16mm) thick•43⁄8" (111mm) long•Chrome-platedsteel
SLIDING GLASS DooR LocKno. 134-1037 •Heavy-duty•Forframelessglassdoorsupto5⁄16" (8mm) thick•51⁄4" (133mm) long•Chrome-platedsteel
DooR HARDWARE
ALL-PURPoSE THRoW LATcH WITH KEEPERno. 141-2087•53⁄8" (137mm) overall length•Stainlesssteel
DooR HoLDERno. 134-1019
•Stepdowntooperate•43⁄4" (121mm) bracket•51⁄8" (130mm) overall height•Aluminumfinish
DooR HoLDERS•Flipdowntooperate•4"(102mm) high
no. 134-1108 Brass finishno. 134-1011 Aluminum finish
HARDWARE
FmPONLINE.COM444
HARDWARE
DooR SToPno. 134-1102
•Concavebumper•Screwmounting•21⁄4" (57mm) diameter•Aluminumfinish
DooR SToPS WITH HoLDER•Wallmounted•35⁄8" (92mm) projection
no. 134-1104 Polished solid brassno. 134-1013 Aluminum
DooR SToPS WITH HoLDER•Foruseonconcretefloors•Floormounted•31⁄2" (89mm) high
no. 134-1105 Polished solid brassno. 134-1016 Aluminum
DooR SToPno. 134-1107•Floormounted•3"(76mm) high•Polishedsolidbrass
DooR SToPS•13⁄4" base diameter x 1" high (44mm x 25mm)
no. 134-1103 Polished solid brassno. 134-1017 Aluminum
DooR HARDWARE
DooR SToPno. 134-1167•Wallmounted•35⁄8" (92mm) projection•Aluminumfinish
KIcK PLATES•Countersunkholesforflatorovalheadscrews8" x 30" (203mm x 762mm)
no. 134-1100 Polished solid brassno. 134-1099 Aluminumno. 134-1101 Stainless steel
8" x 34" (203mm x 864mm)
no. 134-1140 Polished solid brassno. 134-1141 Stainless steel
PUSH/PULL PLATESPusH Plates
•Countersunkholesforflatorovalheadscrews•31⁄2" x 15" (89mm x 381mm)
no. 134-1090 Polished solid brassno. 134-1089 Aluminumno. 134-1091 Stainless steel
Pull Plates
•Countersunkholesforflatorovalheadscrews•31⁄2" x 15" (89mm x 381mm)
no. 134-1093 Polished solid brassno. 134-1092 Aluminumno. 134-1096 Stainless steel
for Eliason® Double-action swing-door Hardware, see the Refrigeration section.
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 445
HARD
WAR
E
KNobS•2"(51mm) diameter•Fits.25"(6mm)diameterdouble“D”stem•Heatresistantplastic
no. 190-1007 On/Offno. 190-1008 Off/Low/Med/High
THREADED HANDLEno. 130-1000
•23⁄4" (70mm) long• 3⁄8-16 female thread•Heatresistantplastic
GAS vALvE HANDLES•Fitsmostvalvesandmountswithsetscrew•Fits.35"(9mm)diameter“D”stem
1. no. 130-1044 Chrome-plated metal2. no. 130-1084 Heat resistant red enamel
finished metal3. no. 158-1004 Heat resistant black
Bakelite plastic
GAS vALvE HANDLEno. 130-1045
•Fitsmostvalves•Fits.35"(9mm) diameter "D" stem•Heatresistantblackplastic
“D”stemposition
1
2
3
GAS vALvE KNobS•CommonlyusedonWolf•21⁄2" (64mm) diameter•Fits.35" (9mm) diameter "D" stem•Heatresistantplasticno. 220-1212 Redno. 220-1213 Black
HEAvy-DUTy ELEcTRIc THERMoSTAT DIALS•Universal4-waymountingpositions•Fitsstandard.187"diameter“D”stem•Blackplasticwithchromeface
no. 130-1056 1 to 10 no. 130-1057 60° to 250°Fno. 130-1058 100° to 200°Fno. 130-1059 100° to 450°Fno. 130-1060 100° to 550°Fno. 130-1062 175° to 550°Fno. 130-1061 200° to 400°Fno. 130-1063 300° to 700°F
STANDARD-DUTy ELEcTRIc THERMoSTAT DIALS•Universal4-waymountingpositions•Fitsstandard.187"diameter“D”stem•Blackplasticwithchromeface
no. 130-1001 1 to 10 no. 130-1002 60° to 250°Fno. 130-1003 100° to 200°Fno. 130-1004 100° to 450°Fno. 130-1005 100° to 550°Fno. 130-1007 200° to 400°Fno. 130-1008 200° to 550°Fno. 130-1009 300° to 700°Fno. 130-1083 Off, Lo, 1 to 7, Hino. 130-1006 Blank
INFINITE coNTRoL DIALno. 130-1010
•Flatisdownin“Off”position•17⁄8" (48mm) diameter•Fitsstandard.187"(5mm)diameter“D”stem•Blackplasticwithchromeface
GAS vALvE HANDLEno. 162-1143•Fitsmostvalves•Fits.35"(9mm)diameter“D”stem•Chrome
HAnDlEs, DiAls, & knoBs
coMbINATIoN vALvE KNobno. 130-1090•FitsRobertshaw700seriescombinationvalves•Includesscrew•Beigeplastic•Blacklettering
HARDWARE
FmPONLINE.COM446
HARDWARE
covER KNobno. 130-1032
•13⁄4" diameter• 7⁄8" high•10 -24thread•Brassthreadedinsert
covER KNobno. 130-1048
•115⁄16" diameter• 7⁄8" high• 1⁄4 -20 thread•Brassthreadedinsert
covER KNobno. 130-1031
•2"diameter•19⁄16" high• 3⁄8 -16 thread
UTILITy KNobno. 130-1035
•1"diameter• 3⁄4" high• 1⁄4 -20 thread•Brassthreadedinsert
UTILITy KNobno. 191-1018
•2"diameter•11⁄4" high• 3⁄8 -16 thread•Brassthreadedinsert
bALL KNobno. 130-1030
•111⁄16" diameter•111⁄16" high• 3⁄8 -16 thread
coNTRoL KNobno. 130-1024
•11⁄2" (38mm) diameter•11⁄16" (17mm) high•1⁄4" (6mm) diameter
mounting hole with brass insert and set screw
coNTRoL KNobno. 130-1025
•11⁄8" (29mm) diameter•9⁄16" (14mm) high•1⁄4" (6mm) diameter
mounting hole with set screw
coNTRoL KNobno. 176-1101
•11⁄8" (29mm) diameter•9⁄16" (14mm) high•3⁄16" (5mm) square
mounting hole with set screw
coNTRoL KNobno. 130-1027
•11⁄4" (32mm) diameter•5⁄8" (16mm) high•1⁄4" (6mm) diameter
mounting hole with set screw
coNTRoL KNobno. 130-1020
•13⁄8" (35mm) diameter•3⁄4" (19mm) high•1⁄4" (6mm) diameter
mounting hole with set screw
THERMoSTAT KNobno. 204-1184•9⁄16" (14mm) high•11⁄16" (17mm) diameter•.235"diameter“D”stem
covER KNobno. 130-1033
•13⁄4" diameter•7⁄8" high•1⁄4 -20 thread•Brassthreadedinsert
covER KNobno. 130-1034
•11⁄16" diameter•11⁄32" high•10 -24thread
TIMER KNobno. 130-1028
•Commonlyusedon Mark Time timers
•Fits3⁄16" x 1⁄8" (5mm x 3mm) double“D”stem
HAnDlEs, DiAls, & knoBs
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 447
HARD
WAR
E
cAbINET LATcHES AND STRIKESno. 122-1213
•Includesflushstrike,1⁄8" (3mm) offset strike, and 3⁄8" (10mm) offset strike
• 11⁄2" x 11⁄2" (38mm x 38mm) latch base dimension• 11⁄16" (17mm) latch screw centers•Chrome-plated
no. 122-1216
•Includesflushstrike,1⁄8" (3mm) offset strike, and 3⁄8" (10mm) offset strike
•17⁄8" x 17⁄8" (48mm x 48mm) latch base dimension• 7⁄8" (22mm) latch screw centers•Chrome-plated
HEAT RESISTANT WARMER LATcHno. 134-1045
•All-metalinternalpartsresistfailurefromheat•101⁄2" (267mm) overall length•11⁄4" (32mm) wide• 5⁄8" and 45⁄8" (16mm and 117mm) screw centers•Chrome-platedwithplastic-coated,
heat resistant handle
ADjUSTAbLE TENSIoN cATcHno. 134-1074
•7⁄16" x 23⁄8" (11mm x 60mm)•Tensionissetwith
adjusting screw•Nickel-platedbrass
ADjUSTAbLE TENSIoN cATcHno. 134-1042
•3⁄4" x 31⁄8" (19mm x 79mm)•Tensionissetwith
adjusting screw•Nickel-platedbrass
MAGNETIc cAbINET cATcHESno. 134-1075 Plastic housing•12lb(5kg) pull
no. 134-1076 Steel housing•20lb(9kg) pull•Zinc-platedsteel
MAGNETIc DooR cATcHESno. 175-1063 21⁄4" L x 3⁄8" W (57mm x 10mm)no. 204-1113 19⁄16" L x 3⁄8" W (40mm x 10mm)
SPRING cATcH AND STRIKEno. 124-1136 •Forholdingdoorstightlyclosed•Canbemountedverticallyorhorizontally•8lb(4kg) pull•1"x4"(25mm x 102mm)•33⁄8" x 3⁄16" (86mm x 5mm) screw centers on catch•Adjustabletension•Zinc-plated
MAGNETIc cAbINET cATcHno. 134-1077
•30lb (14kg) pull•31⁄8" L x 9⁄16" W x 1" D (79mm x 14mm x 25mm)•Zinc-platedsteel
lAtCHEs, stRikEs & CAtCHEs
HARDWARE
FmPONLINE.COM448
HARDWARE
FoLDING bRAcKET FoR REMovAbLE SHELvESBracket folds down neatly when not in use and permits easy removal of shelf for cleaning. This unique feature requires no tools.no. 135-1126 •Theshelfisfoldedbysimplypullingupand
dropping it down•Toremovetheshelf,slidetotheleftwhilein the folded position•33⁄8" H x 75⁄8" D (86mm x 194mm)•Stainlesssteel•Soldinsetsof2
FoLDING bRAcKETno. 135-1179
•85⁄8" D x 33⁄8" H (219mm x 86mm)•Stainlesssteel
1"(25mm)
21⁄2"(64mm)
11⁄2"(38mm)
FoLDING bRAcKETS FoR REMovAbLE SHELvESBracket folds down neatly when not in use and permits easy removal of shelf for cleaning. The shelf is removed by simply sliding it upward while the bracket is in the folded position.
•61⁄8" H x 7" D (156mm x 178mm)
no. 135-1174 Chrome-plated bracket with stainless steel shelf plateno. 135-1175 Chrome-plated bracket with zinc-plated shelf plateno. 135-1177 Brass-plated bracket and shelf plate
FoLDING bRAcKETno. 135-1178
•Bracketfoldsdownneatlywhennotinuse•71⁄2" D x 51⁄4" H (191mm x 133mm)•Forshelvesupto10"(254mm) depth•Zinc-platedsteel
RIGID bRAcKETno. 135-1127
•101⁄2" D x 41⁄4" H (267mm x 108mm)
•Stainlesssteel3"(76mm)
11⁄4"(32mm)
7⁄8"(22mm)
Pull Out Fold Down
Lift Up to Remove
sHElving BRACkEts
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 449
HARD
WAR
E
SHELF STANDARDno. 135-1135
•72"(1829mm) long• 5⁄8" (16mm) wide•Zinc-platedsteel
bRAcKET WITH LocK NUTno. 135-1165
•For10"(254mm) deep shelves•Zinc-platedsteel
bRAcKETno. 135-1142
•For12"(305mm) deep shelves•Zinc-platedsteel
LIFT-oFF bRAcKET SETno. 135-1192
•Installswithscrews,noweldingrequired•Bracketallowslidtobeliftedawayforcleaning
or remain in open position for serving•Includesarightandleftbracketwithpivotpin
and screws•Stainlesssteel
ADjUSTAbLE SNEEzE GUARD bRAcKET SETno. 135-1191
•5"(127mm) high for 1⁄4" (6mm) glass
•Includesarightandleft bracket with adjusting screw
•Stainlesssteel
SNAP-IN RUbbER cUSHIoN no. 135-1020
•Givesextracushiontoglassshelves
FRoNT cLIPno. 135-1171
cENTER cLIPno. 135-1172
END cLIPno. 135-1173
GLASS AND PLASTIc cLEANERno. 143-1084
•Cleansandpolishesglass,plastic/acrylic, Formica®, Plexiglas®, stainless steel, chrome and many other materials
•Non-ammoniated,lowVOC formula
•Anti-fog,anti-static•DoesnotcontainCFCs•19oz(539g) can
ClEAR plAstiC sHElf BRACkEt Clips
Aerosol cans cannot ship by air.
FoLD-DoWN coUNTER PRoTEcToR bRAcKETS•Glassbracketfoldsdownforeasycleaning•Concealedmounting•Designedtohold1⁄4" (6mm) glass•Bracketsarefurnishedwithrearsupportchannel•14"(356mm) high and
10" (254mm) shelf depth•Stainlesssteelno. 135-1181 Left endno. 135-1180 Centerno. 135-1182 Right end
HARDWARE
FmPONLINE.COM450
HARDWARE
bAR STooL SWIvELSstandard swIvels
Item no. wIdtH sCrew Centers
280-1056 63⁄8" 47⁄8" to 51⁄2" (162mm) (124mm to 140mm)
280-1002 7" 5" to 53⁄4" (178mm) (127mm x 146mm)
Heavy-duty swIvel wItH Center return
Item no. wIdtH sCrew Centers
280-1003 7" 5" to 53⁄4" (178mm) (127mm x 146mm)
SERvIcE bAR RAILno. 135-1216
•Idealforsectioningoffserviceareasonbars•26"(660mm) high x 16" (406mm) wide across the
top x 12" (305mm) wide across the bottom•Includes3"(76mm) outside diameter
mounting plates•11⁄2" (38mm) outside diameter highly
polished brass
TAbLE HINGEThis hinge allows table leaves to be folded completely up under the table where they are out of the way.no. 135-1130 •Leavescanbefoldedouttoaddextra seating capacity•Heavygaugeplatedsteel
How It works
A. Hinge locks leaf under table for storage
B. Leaf is quickly folded out
C. Hinge locks leaf in place to enlarge table
A
B
C
Have you Tried ordering online at FMPONLINE.COM?
it’s fast & Easy!• 12,000ItemsListed• Point&ClickOrdering• CustomFavoriteItemsMenu• OrderTracking• 24-HourOrdering• OrderHistory• CompleteSearch• ConstantlyUpdated• QuickOrderOption• Closeouts• Specials
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 451
HARD
WAR
E
90° ELboWS•Stainlesssteel
Item no. tubInG sIZe a
135-1190 1" OD 4"135-1221 15⁄8" OD 10"
U-bEND END cAPno. 135-1188
•ForusewithbracketsNos.135-1185 and 135-1186
•For1"ODtubing•8"centers•Stainlesssteel
FoLD-DoWN TRAy SLIDE bRAcKETno. 135-1186
•121⁄2" overall length•3tubingsupportson4"centers•For1"ODtubing•Stainlesssteel
Note: Brackets should be placed every 4'.
PLASTIc END cAPno. 121-1058
•Fitsoutside1"ODtubing
•Blackplastic
PLASTIc END cAPno. 121-1090
•Fitsinside1"ODtubing
•Blackplastic
END cAPno. 121-1101
•For1"ODtubing•Stainlesssteel
END cAPno. 121-1103
•For1"ODtubing•Fits7⁄8" hole•Nickel-platedsteel
Savemoneyonfabricationcosts—buildyourown tray slides using the tubing, accessories and brackets listed on this page.
RIGID TRAy SLIDE bRAcKETno. 135-1185
•121⁄2" overall length•3tubingsupportson4"centers•For1"ODtubing•Stainlesssteel
Note: Brackets should be placed every 4'.
STAINLESS STEEL TUbING•10'long
no. 135-1189 1" ODno. 135-1217 15⁄8" OD
Note: 10' lengths ship by truck. Can be cut at your request. Cutting charges apply.
A
HARDWARE
FmPONLINE.COM452
HARDWARE
STAINLESS STEEL SASH cHAINno. 102-1111
•Idealforuseondishwashersoranywetarea•10'(3048mm) long•#35sash
STAINLESS STEEL FAcED cyLINDER LocKno. 132-1083
•For9⁄32" (7mm) maximum drawer thickness
SLIDING DooR LocKno. 134-1065
•Forslidingdoorsupto7⁄8" (22mm) thick•Satinchromefinish•Includes2keys
TUbING SocKETno. 135-1225
•For1"ODtubing•Chrome-plated,zincdie-cast•Includes2mountingscrewsandasetscrew
SoLID bRASS coAT HooK no. 134-1039
SoLID bRASS coAT HooKno. 134-1040
STAINLESS STEEL-FAcED cyLINDER LocK•180°camaction•Include2keys
Item no. a (max.) b C
132-1084 1⁄4" 19⁄32" 7⁄8" (6mm) (15mm) (22mm)
132-1085 9⁄16" 25⁄32" 11⁄16" (14mm) (20mm) (27mm)
132-1086 15⁄16" 15⁄32" 17⁄16" (24mm) (29mm) (37mm)
132-1087 13⁄16" 113⁄32" 111⁄16" (30mm) (36mm) (43mm)
AB
C
7⁄8"(22mm)
11⁄64"(4mm)
7⁄8"(22mm)
5⁄16"(8mm)
1⁄8"(3mm)
STAINLESS STEEL FINISHING STRIPS•Forusewithstainlesssteelsheetsthatare
applied to commercial kitchen walls•7'(2134mm) long1. no. 135-1258 Cap strip 2. no. 135-1259 Divider bar
1
EXPANDING FASTENERS•Fitsroundorsquaretubing•Bolttightenstosecuretubingtofixedsurfaceno. 135-1219 For 1" OD tubingno. 135-1220* For 11⁄2" OD tubing
* Can be used for 11⁄4" pipe
coAT HooKno. 141-2104•Surfacemounted•Includesmountingscrews•Stainlesssteel
1⁄2"(13mm)
13⁄8"(35mm)
2
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 453
HARD
WAR
E
FLAT HEADMAcHINE ScREWS•Stainlesssteel•Soldinquantitiesof100no. 623-0824 8-32 x 11⁄2"no. 623-1032 10-24 x 2"no. 623-1432 1⁄4-20 x 2"
oNE-WAy SHEET METAL ScREWS•Stainlesssteel•Soldindividuallyno. 716-0812 8 x 3⁄4"no. 716-0816 8 x 1" no. 716-1016 10 x 1"
TRUSS HEAD
MAcHINE ScREWS•Stainlesssteel•Soldinquantitiesof100no. 622-0604 6-32 x 1⁄4"no. 622-0606 6-32 x 3⁄8"no. 622-0608 6-32 x 1⁄2"no. 622-0612 6-32 x 3⁄4"no. 622-0804 8-32 x 1⁄4"no. 622-0806 8-32 x 3⁄8"no. 622-0808 8-32 x 1⁄2"no. 622-0812 8-32 x 3⁄4"no. 622-0816 8-32 x 1"no. 622-0824 8-32 x 11⁄2" no. 622-0832 8-32 x 2" no. 622-1004 10-24 x 1⁄4" no. 622-1006 10-24 x 3⁄8" no. 622-1008 10-24 x 1⁄2" no. 100-1025* 10-24 x 3⁄4" no. 622-1016 10-24 x 1"no. 622-1024 10-24 x 11⁄2" no. 622-1032 10-24 x 2" no. 622-1104 10-32 x 1⁄4" no. 622-1106 10-32 x 3⁄8" no. 622-1108 10-32 x 1⁄2" no. 622-1116 10-32 x 1" no. 622-1124 10-32 x 11⁄2"no. 622-1132 10-32 x 2" no. 622-1412 1⁄4 -20 x 3⁄4" no. 622-1416 1⁄4 -20 x 1" no. 622-1424 1⁄4 -20 x 11⁄2" no. 622-1432 1⁄4 -20 x 2"
*Sold individually
oNE-WAy MAcHINE ScREWno. 715-1020
•10 -24x11⁄4 "•Chrome-plated•Soldindividually
oNE-WAy bARREL NUTno. 717-1000
•10-24•5⁄8" long•Chrome-plated•Soldindividually
TRUSS HEAD
SHEET METAL ScREWS•Stainlesssteel•Soldinquantitiesof100no. 612-0608 6 x 1⁄2"no. 612-0612 6 x 3⁄4"no. 612-0616 6 x 1" no. 612-0808 8 x 1⁄2" no. 612-0812 8 x 3⁄4" no. 612-0816 8 x 1" no. 612-0820 8 x 11⁄4"no. 612-0824 8 x 11⁄2"no. 612-0832 8 x 2"no. 612-1008 10 x 1⁄2" no. 612-1012 10 x 3⁄4"no. 612-1016 10 x 1" no. 612-1020 10 x 11⁄4"no. 612-1024 10 x 11⁄2" no. 612-1032 10 x 2"no. 612-1208 12 x 1⁄2" no. 612-1212 12 x 3⁄4" no. 612-1216 12 x 1" no. 612-1220 12 x 11⁄4" no. 612-1224 12 x 11⁄2" no. 612-1232 12 x 2"
WINGIT™ WALL FASTENERSWingIt Wall Fasteners are the solution for many surfacemountinstallations—fromhanddryersandbaby changing stations to soap dispensers and grab bars. WingIts install in minutes and ensure a secure, permanent fit that maintains its structural integrity—nomatterwhichdirectiontheloadingoccurs or how often.•Includesinstructions•Waterandfireresistant•Stainlesssteel1. no. 142-1483 21⁄4" diameter
•Soldinpacksof22. no. 142-1484* 23⁄4" diameter*For grab bar mounting only
2
oNE-WAy FASTENER REMovAL TooLno. 715-1021•Foreasyremovalofone-wayscrews•71⁄4" long
fAstEnERs
1
HARDWARE
FmPONLINE.COM454
HARDWARE
HEX HEAD boLTS •Stainlesssteel•Soldinquantitiesof100
no. 626-1416 1⁄4 -20 x 1" no. 626-1424 1⁄4 -20 x 11⁄2"
HEX NUTS•Stainlesssteel•Soldinquantitiesof100
no. 701-0600 6 -32no. 701-0800 8 -32no. 701-1000 10 -24no. 701-1100 10 -32no. 701-1400 1⁄4 -20
SPEED NUTno. 713-1000•10-24•Zinc-plated•Soldinquantitiesof100
AcoRN NUTno. 714-1000•10-24•Nickel-plated•Soldinquantitiesof100
FLAT WASHERS •Stainlesssteel•Soldinquantitiesof100
no. 705-0600 #6no. 705-0800 #8no. 705-1000 #10no. 705-1400 1⁄4"
LocK WASHERS •Stainlesssteel•Soldinquantitiesof100
no. 707-0600 #6no. 707-0800 #8no. 707-1000 #10no. 707-1400 1⁄4"
RIvETS•Usedwithrivetgun(No.142-1237).•1⁄8" diameter rivet with domed head•Stainlesssteel•Soldinquantitiesof100no. 142-1132 1⁄16" to 1⁄8" range (42)no. 142-1135 1⁄8" to 3⁄16" range (43)no. 142-1138 3⁄16" to 1⁄4" range (44)no. 142-1143 5⁄16" to 3⁄8" range (46)
THREADED INSERTS•Providesthreadedholeinsheetmetal•Zinc-platedsteel•Soldinquantitiesof100no. 142-1150 8-32 no. 142-1151 10-24 no. 142-1152 10-32no. 142-1153 1⁄4-20no. 142-1485 5⁄16-18
Note: Threaded inserts are used with insert tool kit (No. 142-1229).
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 455
HARD
WAR
E
SHoRT LENGTH STAINLESS STEEL MAcHINE ScREW KITno. 799-1000
•Trussheadphillipsheadscrews•Contains144piecesofthefollowingitems: Qty. sIZe 12 6-32 x 1⁄4" 12 6-32 x 3⁄8" 12 6-32 x 1⁄2" 12 8-32 x 1⁄4" 12 8-32 x 3⁄8" 12 8-32 x 1⁄2" 12 10-24 x 1⁄4" 12 10-24 x 3⁄8" 12 10-24 x 1⁄2" 12 10-32 x 1⁄4" 12 10-32 x 3⁄8" 12 10-32 x 1⁄2"
stAinlEss stEEl fAstEnER kitsFinally, stainless steel screws, nuts and washers in conveniently packaged kits.
Each kit contains a unique selection of stainless steel fasteners packed in a plastic case.
LoNG LENGTH STAINLESS STEEL MAcHINE ScREW KITno. 799-1002
•Trussheadphillipsheadscrews•Contains99piecesofthefollowingitems: Qty. sIZe
15 8-32 x 1" 10 8-32 x 11⁄2" 8 8-32 x 2" 10 10-24 x 1" 8 10-24 x 11⁄2" 6 10-24 x 2" 8 10-32 x 1" 8 10-32 x 11⁄2" 6 10-32 x 2" 6 1⁄4-20 x 1" 6 1⁄4-20 x 11⁄2" 4 1⁄4-20 x 2"
MEDIUM LENGTH STAINLESS STEEL MAcHINE ScREW KITno. 799-1001
•Trussheadphillipsheadscrews•Contains196piecesofthefollowingitems: Qty. sIZe 20 6-32 x 1⁄2" 20 6-32 x 3⁄4" 20 8-32 x 1⁄2" 20 8-32 x 3⁄4" 20 8-32 x 1" 20 10-24 x 1⁄2" 15 10-24 x 3⁄4" 10 10-24 x 1" 20 10-32 x 1⁄2" 15 10-32 x 1" 8 1⁄4 -20 x 3⁄4" 8 1⁄4 -20 x 1"
HARDWARE
FmPONLINE.COM456
HARDWARE
SHoRT LENGTH STAINLESS STEEL SHEET METAL ScREW KITno. 799-1003
•Trussheadphillipsheadscrews•Contains168piecesofthefollowingitems: Qty. sIZe
18 6 x 1⁄2" 18 6 x 3⁄4" 18 6 x 1" 18 8 x 1⁄2" 12 8 x 3⁄4" 12 8 x 1" 12 10 x 1⁄2" 12 10 x 3⁄4" 12 10 x 1" 12 12 x 1⁄2" 12 12 x 3⁄4" 12 12 x 1"
LoNG LENGTH STAINLESS STEEL SHEET METAL ScREW KITno. 799-1005
•Trussheadphillipsheadscrews•Contains112piecesofthefollowingitems: Qty. sIZe
10 8 x 1" 10 8 x 11⁄4" 10 8 x 11⁄2" 10 8 x 2"* 10 10 x 1" 10 10 x 11⁄4" 10 10 x 11⁄2" 8 10 x 2" 8 12 x 1" 10 12 x 11⁄4" 8 12 x 11⁄2" 8 12 x 2"
STAINLESS STEEL NUT AND WASHER KITno. 799-1004
•Contains260piecesofthefollowingitems: Qty. sIZeHex nuts 20 6-32 20 8-32 20 10-24 20 10-32 20 1⁄4 -20
Flat wasHers
20 #6 20 #8 20 #10 20 1⁄4"
Qty. sIZe
loCk wasHers
20 #6 20 #8 20 #10 20 1⁄4"
stAinlEss stEEl fAstEnER kitsFinally, stainless steel screws, nuts and washers in conveniently packaged kits.
Each kit contains a unique selection of stainless steel fasteners packed in a plastic case.
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 457
HARD
WAR
E
RETAINING RING KITno. 142-1277
•Contains218piecesofthefollowingpopulardiameters:1⁄4" 1⁄2" 13⁄16" 5⁄16" 9⁄16" 7⁄8"3⁄8" 5⁄8" 1" 7⁄16" 3⁄4" 11⁄4"
E-RING KITno. 142-1278
•Contains300piecesofthefollowingpopulardiameters:1⁄16" 1⁄4" 5⁄8" 1⁄8" 3⁄8" 3⁄4" 3⁄16" 1⁄2" 7⁄8"
ELEcTRIcAL STRAIN RELIEF bUSHING KITno. 142-1281
•Contains188piecesin18popularsizesforflat and round wire
fAstEnER kits
HARDWARE
FmPONLINE.COM458
HARDWARE
ALLEN HEAD SET ScREW KITno. 142-1280
•Contains200piecesofthefollowingpopularsizes: Coarse tHread FIne tHread 1⁄8" x 3⁄16" 1⁄4" x 1⁄4" 3⁄16" x 1⁄4" 5⁄16" x 3⁄8" 5⁄32" x 3⁄16" 3⁄8" x 3⁄8" 1⁄4" x 1⁄4" 1⁄4" x 3⁄8" 5⁄16" x 3⁄8" 5⁄16" x 1⁄2" 3⁄8" x 3⁄8" 3⁄8" x 1⁄2"
RoLL PIN KITno. 142-1279
•Contains204piecesofthefollowingpopularsizes: 1⁄16" x 3⁄4" 1⁄4" x 7⁄8" 3⁄32" x 1" 1⁄4" x 11⁄4" 3⁄32" x 11⁄4" 1⁄4" x 11⁄2" 1⁄8" x 7⁄8" 5⁄16" x 11⁄2" 1⁄8" x 11⁄2" 5⁄16" x 13⁄4" 5⁄32" x 1" 5⁄16" x 21⁄2" 3⁄16" x 1" 3⁄8" x 11⁄4" 3⁄16" x 11⁄2" 3⁄8" x 21⁄4" 7⁄32" x 11⁄4"
SPRING KITno. 142-1282
•Contains156piecesofthefollowingpopularsizes: ComPressIon extensIon 3⁄16" x 1" 3⁄16" x 11⁄4" 3⁄16" x 13⁄4" 3⁄16" x 11⁄2" 1⁄4" x 1" 3⁄16" x 21⁄2" 1⁄4" x 13⁄4" 1⁄4" x 11⁄4" 1⁄4" x 21⁄4" 1⁄4" x 2" 5⁄16" x 11⁄4" 5⁄16" x 11⁄2" 5⁄16" x 11⁄2" 5⁄16" x 21⁄4" 5⁄16" x 21⁄2" 5⁄16" x 21⁄2" 3⁄8" x 2" 3⁄8" x 13⁄4" 3⁄8" x 2"
kits
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 459
HARD
WAR
E
TAPE MEASURES•MetricandSAEmeasurements•Chrome-platedplasticcaseswithbladelocksno. 142-1273 12'x1⁄2" (3658 x 13mm)no. 142-1274 25'x1"(7620mm x 25mm)
HEX KEy SETno. 142-1014 •9keysizes:
5⁄64", 3⁄32", 7⁄64", 1⁄8", 9⁄64", 5⁄32", 3⁄16", 7⁄32", 1⁄4"•Rustresistant•Hardenedsteel
PLASTIc SToRAGE boXES•81⁄4" L x 41⁄2" W x 13⁄8" H (210mm x 114mm x 35mm)•Clearplasticno. 280-1032 6-compartmentno. 280-1033 12-compartmentno. 280-1054 12-compartmentno. 280-1031 18-compartment
HEAvy-DUTy SToRAGE boXES•Breakresistantclearplasticmaterialwithmetal
hinges will provide years of rough service use•121⁄4" L x 61⁄8" W x 11⁄2" H (311mm x 156mm x 38mm)•Clearplasticno. 280-1030 6-compartmentno. 280-1029 24-compartment
no. 280-1030 no. 280-1029
no. 280-1032
no. 280-1054 no. 280-1031
no. 280-1033
NyLoN HooK AND LooP STRIPSVersatile strips can be used to solve an unlimited number of problems: use them for holding just about anything to anything. Both hook and loop strips with adhesive backs are provided. Attach the adhesived sides together and you have a reusable tape strip that can be used to wrap or store a large variety of items.no. 280-1046 •3"longx1"wide(914mm x 25mm) strips
WIRE TIES•1⁄16" (2mm) minimum bundle diameter•Soldinquantitiesof100 maxImumItem no. lenGtH bundle dIa.253-1112 83⁄16" (208mm) 2" (51mm)253-1113 111⁄2" (292mm) 31⁄16" (78mm)
MULTI-PURPoSE TooLno. 142-1428
•12toolsinone•Includes:needlenoseplierswithwirecutters,
3 standard head screwdrivers, 1 Phillips head screwdriver, 21⁄2" (64mm) knife blade, can opener, file, ruler, awl/punch, fish scaler, bottle opener
•Stainlesssteelwithimpactresistantplastichandle•Leathercase
HARDWARE
FmPONLINE.COM460
HARDWARE
4-IN-1 ScREWDRIvERno. 142-1015
•Contains3⁄16" and 9⁄32" flat bit, #1 and #2 Phillips bit
10-IN-1 ScREWDRIvERno. 142-1450
•Contains3⁄16" and 1⁄4" flat bits, #1 and #2 Phillips bits, T15 and T20 Torx® bits, #1 and #2 square recess bits, 1⁄4"and 5⁄16" nut drivers
•Chrome/nickel-platedtube•Oversizedhandle
RIvET GUNno. 142-1237
•Heavy-dutyrivetgun•Setsrivetdiametersof3⁄32", 1⁄8", 5⁄32", 3⁄16"
RIvETS•1⁄8" diameter rivet with domed head•Stainlesssteel•Soldinquantitiesof100no. 142-1132 1⁄16" to 1⁄8" range (42)no. 142-1135 1⁄8" to 3⁄16" range (43)no. 142-1138 3⁄16" to 1⁄4" range (44)no. 142-1143 5⁄16" to 3⁄8" range (46)
cASTER WRENcH KITno. 142-1506•Forattachingandtighteningstemcasters
to equipment•Includes3“flat”steelwrenches:113⁄16" open, 13⁄16"
hex head, and 3⁄4" hex head
TAMPERPRooF ToRX® ScREWDRIvERno. 142-1522•Forusewithhingedfloordraingrates•FitssizeT-20screwswithtamperproofheads•Non-removabletip
cALIbRATIoN ScREWDRIvERno. 142-1267
•Smallbladeforadjustingelectricthermostats•Withpocketclip•51⁄4" (133mm) overall length
6-IN-1 RATcHET ScREWDRIvERno. 142-1559•Featuresforwardandreverseratcheting
adjustment collar, and reversible double-ended driver
•Includes3⁄16", 1⁄4"nutdrivers;3⁄16", 1⁄4" flat bits;#1,#2Phillipsbits
ANGLING RATcHET ScREWDRIvERno. 142-1560•Hingeddriverlocksineitherstraightor
angled positions•Featuresforwardandreverseratcheting
adjustment collar•Includes3⁄16", 1⁄4", 9⁄32", 5⁄16", 11⁄32" 3⁄8", 7⁄16", 15⁄32",
1⁄2"nutdrivers;3⁄16", 1⁄4", 9⁄32"flatbits;#1,#2,#3Phillipsbits;T10,T15,T20,T25Torx® bits
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 461
HARD
WAR
E
DRILL bIT SETS FoR STAINLESS STEEL•Jobberlength•Highspeedsteel•MetalstoragecaseItem sIZe number no. ranGe oF drIlls
142-1109 1⁄16" to 1⁄4" by 64ths 13142-1110 1⁄16" to 1⁄2" by 32nds 15142-1077 1⁄16" to 1⁄2" by 64ths 29142-1078 Number sizes 1 to 60 60
GAUGE GLASS cUTTERno. 142-1228
•Cutsgaugeglass and glass tubing quickly and easily TAPS FoR STAINLESS STEEL
•Highspeedsteelno. 142-1272 8-32 threadno. 142-1269 10-24 threadno. 142-1270 10-32 threadno. 142-1355 1⁄4 -20 thread
WIRE bRUSHno. 142-1089
•10"(254mm) overall length•Hardwoodhandle
STAINLESS STEEL WIRE bRUSHno. 142-1339
•75⁄8" (194mm) overall length•Hardwoodhandle
STAINLESS STEEL WIRE bRUSHno. 142-1338
•101⁄4" (260mm) overall length•Hardwoodhandle
STAINLESS STEEL WIRE bRUSHno. 142-1337
•14"(356mm) overall length•Hardwoodhandle
DRILL bITS FoR STAINLESS STEEL•135°splitpoint•HighspeedsteelsHort lenGtH For sHeet metal
no. 142-1247 3⁄32" diameterno. 142-1245 1⁄8" diameterno. 142-1354 5⁄32" diameterno. 142-1246 3⁄16" diameterno. 142-1243 1⁄4" diameterno. 142-1250 5⁄16" diameterno. 142-1248 3⁄8" diameterno. 142-1241 1⁄2" diameter
DoUbLE-ENDED DRILL bITS FoR STAINLESS STEEL•135°splitpoint•Highspeedsteel
no. 142-1255 1⁄8" diameterno. 142-1257 3⁄16" diameterno. 142-1254 1⁄4" diameterno. 142-1256 # 30
HARDWARE
FmPONLINE.COM462
HARDWARE
SMALL RADIUS TUbING cUTTERno. 142-1216 •Onlyrequires11⁄4" radius•For1⁄8" to 7⁄8" OD tubing
oETIKER cLAMP PLIERSno. 142-1123
•Forcrimpingslideonclamps
FLARING TooLno. 142-1013
•One-piecetoolallowsquickandeasyflaring of 6 common tubing sizes
•Forusewiththefollowingtubing:aluminum,annealed brass, copper, stainless steel, steel, and others
•Heavy-dutyconstruction•Adjustablegrippingpressure•Rotatetheclampblockstoflare
3⁄16", 1⁄4", 5⁄16", 3⁄8", 1⁄2", 5⁄8" OD tubing
EXTENDIbLEINSPEcTIoN MIRRoRno. 142-1017
•All-angledballjointswivel•Stainlesssteelmirrorback•Fitsinpocketandincludesclip•11⁄4" (32mm) round mirror•Folded:51⁄2" (140mm) and extends to:
181⁄2" (470mm)•Magnetichandle
INSPEcTIoN MIRRoRnon-inverted image!
no. 142-1481
•Opticalqualityglassprismprovides non-inverted image
•Shockresistantplastichousing•Multiplejointsallowaccesstoeventhe
toughest spots•Convenientpocketclip•Extendsto16"(406mm)
6-IN-1 TAPPING TooLSix taps in one handy tool. Ideal for cleaning up threads or making new ones.no. 142-1016 •Threadsizes:
6-32, 8-32, 10-24, 10-32, 12-24, 1⁄4-20•Highcarbonsteeltaps
tools
AcID bRUSHno. 142-1289
boX joINT PUMP PLIERSno. 142-1558•7-positionself-grippingjaw•12"(305mm) overall length
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 463
HARD
WAR
E
DIGITAL MULTIMETERno. 142-1439
•Formeasuringvoltage,amperage,resistancecontinuity, and diode
•30rangesand7functions•Large1"(25mm) high LCD display•Surgevoltageprotection•Datahold•Continuitybuzzer•MeetsIECsafetystandards•Includes9voltbattery,rubberboot
and test leadsno. 253-1242 Replacement 9 volt battery
DIGITAL cLAMP-oN TESTERno. 142-1440
•Formeasuringvoltage,amperage,resistanceandcontinuity
•6rangesand5functions•1⁄2" (13mm) high LCD display•Dataandpeakhold•Continuitybuzzer•MeetsULandIECsafetystandards•Includes2AAAbatteries,carryingcase,
and test leadsno. 253-1243 Replacement AAA battery
WIRE MARKER TAPE AND DISPENSERno. 142-1021
•Compact,lightweight,durable•Refillable•Contains10rollsoftapenumbered0–9
MIcRoWAvE TESTERno. 142-1557•Checkswattagelevelinmicrowaves•Rangeof0–1816watt
SATISFAcTIoN GUARANTEED
If you are not completely satisfied with an item for any reason, simply call us within 60 days of the invoice date. We will issue a Return Merchandise
Authorization (RMA) number, and you can return the item for credit.
THERE WILL BE NO RESTOCKING CHARGE ON STOCK ITEMS.
In some cases, non-stock items will be subject to a restocking charge or may not be returnable.
Custom-made items are not returnable.
HARDWARE
FmPONLINE.COM464
HARDWARE
THREADED INSERTS•Zinc-platedsteel•Soldinquantitiesof100no. 142-1150 8-32 threadno. 142-1151 10-24 threadno. 142-1152 10-32 threadno. 142-1153 1⁄4-20 threadno. 142-1485 5⁄16-18 thread
METAL PUNcH KITno. 142-1051
•Punchessteel,copper,aluminum,andplasticupto 14 gauge
•Punches7holesizes: 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", 1⁄4", 9⁄32"
•Plasticstoragecase
INSERT GUNno. 142-1236
INSERT HEADSno. 142-1235 8-32 no. 142-1230 10-24 no. 142-1231 10-32 no. 142-1232 1⁄4 -20
HoLE SAW KITno. 142-1050
•Foruseonaluminum,fiberglass,plastic,steel,tin and wood
•Kitincludesholesawsizes: 7⁄8", 11⁄8", 13⁄8", 13⁄4", 2", 21⁄2" and 3 arbors
•Plasticstoragecase•Greenleeno.830
THREADED INSERT TooL KITIdeal for installing refrigerator hardware or anything requiring a flush threaded mounting in sheet metal. When properly installed, these inserts are guaranteed not to pull out or shake loose.no. 142-1229 •Installsinsheetmetalfrom.020"to.200"thick•Metal storage case•Kitincludes: InsertgunNo.142-1236
6-32 insert head No. 142-1234 8-32 insert head No. 142-1235 10-24 insert head No. 142-1230 10-32 insert head No. 142-1231 1⁄4 -20 insert head No. 142-1232 5⁄16 -18 insert head No. 142-1233
Place insert in gun and put into pre-drilled hole.
Tool sets insert into hole by crimping non-threaded portion of insert.
Insert is now permanently attached with a 360° contact fit.
Deep threads provide a stronger mount than sheet metal screws.
tool kits
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 465
HARD
WAR
E
AccUSHARP® KNIFE SHARPENERGive your knives a razor-sharp edge in seconds.no. 280-1216•Diamond-honedtungstencarbidesharpeningbladesforanexcellent
sharpened finish•Reversiblebladeshaveatotalexpectedlifeof2to3yearsunder
normal commercial use•Durableplasticwithtough,polypropylene,fullfingerguardno. 280-1610 Display box•Comespreloadedwith36Accusharp® knife sharpeners and assembled
for countertop use•Floorstanddisplayrequiressomeassembly•411⁄2" H x 14" W x 12" D (1054mm x 356mm x 305mm) overall dimensionsno. 280-1217 Replacement blade set
Caution: Do not use sharpener with finger guard removed. Serious injury may result.
SHEAR SHARP® ScISSoR SHARPENERno. 280-1229•Sharpensscissors,shears,andsnips•Diamond-honedtungstencarbide
sharpening blades for an excellent sharpened finish
•Reversiblebladeshaveatotalexpectedlife of 2 to 3 years under normal commercial use
•Durableplasticwithtough,polypropylene, full finger guard
cUSToM IMPRINTED AccUSHARP® KNIFE SHARPENERno. 300-1061 Custom imprinted knife sharpener There is a one-time imprint setup charge. The charge varies according to the complexity of the imprint. Call for details.
sHARpEnERs
Best Quality in Foodservice
HARDWARE
FmPONLINE.COM466
HARDWARE
SHEET METAL MARKING PENcILS•Specificallydesignedforlayoutworkon
stainless steelno. 142-1053 Blackno. 142-1054 Red
ADjUSTAbLE DEbURRING TooLno. 142-1052
•Removestheburrsonsheetmetalaftercutting•Idealforstainlesssteel•Eliminatestimewastedbyfiling•Adjustableforallgaugesofsheetmetal
FAN bLADE/bLoWER WHEEL PULLERSpecifically designed to safely remove frozen fan blades and blower wheels from motor shafts.no. 142-1451•Canbeusedonupto5⁄8" belt drive
and 1⁄2" direct drive motor shafts•Sightholesprovidedforproperalignment•Savestimeandmoney•Easy-to-followinstructionsincluded•Amustforeverytoolbox
LEvER/TWIST WASTE TooLHeavy-duty tool for removing or installing lever and twist wastes with 23⁄4" or 31⁄8" slots. Works for both 3" and 31⁄2" sink openings.no. 142-1113 •Stainlesssteel
Note: Cannot be used on T & S Brass twist and lever wastes.
PANEL LIFTING TooLSThis unique tool is designed so two people can easily lift and carry one or more large panels. The tool can be positioned anywhere on the panels to allow comfort when carrying, regardless of any difference in height. •Automaticallyclampstooneormorepanelsasthetoolislifted•Usewithwalk-inpanels,doors,steel,framedwindows,plywood,gypsum
board, or just about any large panel•Noweightlimit–willholdanyliftableweight•Plastic-coatedforgedsteel•Soldinpairsno. 142-1452 For panels 1⁄4" to 41⁄2" (6mm to 114mm) thickno. 142-1460 For panels up to 51⁄2" (140mm) thick
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 467
HARD
WAR
E
PRESSURE GAUGES•Bottommount•2"dial•1⁄4" NPT male
no. 133-1139 0–30 PSI range no. 133-1138 0–60 PSI rangeno. 133-1136 0–100 PSI range
PRESSURE TEMPERATURE GAUGEno. 133-1161
•211⁄16" •80°to320°F(27° to 160°C)•0–200PSIrange• 1⁄2" NPT
EXTENDIbLE MATcH HoLDERno. 142-1215
•Idealforlightingpilots•Extendsfrom6"to24" (152mm to 610mm)•Withpocketclip
WATER-TyPE MANoMETERno. 142-1217
•Formeasuringgaspressure
•0"to16"ofwatercolumn scale
•Tubingincluded
PIN vISEno. 142-1214
•Idealforholdingorificedrillsandreamers•Providesabettergripandmoreturningpower
REAMERno. 142-1211
•3⁄32" diameter
ADjUSTAbLE oRIFIcE DRILLS•Convenientandeasytousewithnumbersizes
printed on tool shank•Simplyslidetorequiredsizeandlockinplace•Steelbladewithaluminumhandle
no. 142-1341 #31–#52no. 142-1340 #50–#80
oRIFIcE DRILL KITno. 142-1212•Setcontains41drillsizes#40through#80and
tapered broach•Alldrillsarepermanentlybondedintobrass
handles•NaturalandLPgasconversionchartincluded•Plasticstoragecase
GAS SHUT-oFF WRENcHno. 142-1535•Accommodatesavarietyofgaslineshut-offs•101⁄8" x 11⁄4" (257mm x 32mm)•Blackenameledcastiron
GAS PRESSURE TEST KITS•Specialnippleallowseasyconnectionto
manifold•Easilyandaccuratelymeasuresgaspressure•Plasticstoragecase
no. 142-1218 0" to 35" of water column scaleno. 142-1421 0" to 15" of water column scale
bURNER PoRT TIP cLEANER SETno. 133-1442•Forcleaninggasportholesonvariousburners•Nine2"(51mm) long tip cleaners in different
diameters
HARDWARE
FmPONLINE.COM468
HARDWARE
PLASTIc FUNNELno. 142-1073
•8"(203mm) diameter• 3⁄8" (10mm) outlet
FLEXIbLE SAFETy GoGGLESno. 142-1100
•Ventilatedtoreducefogging•Fitscontoursofface•MeetsANSIandOSHArequirements•Onesizefitsall
FAcE MASKno. 142-1548 •Adjustablenosebridgeand2elasticbands•NIOSHapproved•Boxof20
MULTI-PURPoSE bUcKET oPENERno. 142-1441
•Opensplasticbuckets,metalbuckets,andpaint cans
•Cutslidflangesonplasticbucketssafely without a knife
•Convenientholeforhanging•Temperedsteelwithplastic-coatedhandle
bUcKET oPENERno. 142-1359
•Opensplasticpailsquicklyandeasily•Willnotdistortordamagethecontainer•Heavy-dutyplastic
IMPAILER PRo bUcKET oPENERPerfect tool for cutting, opening, and resealing. Saves time and effort, reduces spoilage, and replaces more dangerous methods of dealing withplasticpails—requiringlittleeffort!no. 142-1518•For2–5gal(8–19L) plastic containers or pails
of any size•Convenientholeforhanging•Aluminum
KLEvER KUTTER™ boX cUTTER by SAN jAMAR®
A clever solution for employee safety.no. 150-6037•Recessedbladedesignpreventsinjuriesand
damage to contents•Dishwashersafe•Stainlesssteelbladewithredplasticgrip•Packof3
Just the thing to grip and hold blender clutches for quick and easy removal.no. 142-1468•Forremovalofbaseclutchesandcontainercouplings•ForusewithHamiltonBeachandWaringblenders
Blender Clutch removal Tool
X-TRA SAFE E® SAFETy UTILITy KNIFEno. 133-1331•Trigger-activatedknifeguardallowsonecut
at a time•Boxtapecuttingedge•Ergoflowhandleislightweight,non-fatiguing,
and comfortable•High-impactyellowplasticwithsurgical
stainless steel knife
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 469
HARD
WAR
E
Pvc ELEcTRIcAL TAPEno. 142-1276
•3⁄4"x60'(19mm x 18M)
SELF-STIcKING WARNING STRIPESno. 280-1027
•Markhazardousareaswithoutpainting•Blackandyellowstripes•2"x18yd(51mm x 16M)
FIbERGLASS TAPEno. 142-1168
•Forhightemperaturewiring•Ratedto266°F(130°C)•1⁄2"x66'(13mm x 20M)
TEFLoN® TAPEno. 117-1034
•1⁄2" x 520" (13mm x 13M) •Themosteconomicaltape
available
ANTI-SLIP SAFETy TAPE•Idealforwalk-inboxes•Blackgritmaterialwithadhesivebackcanbe
used indoors or outdoors•Forwood,concreteormetalsurfacessHort lenGtH
no. 280-1180 6"x2'(152mm x 610mm)
rolls
no. 280-1041 1"Wx60'(25mm x 18M)no. 280-1042 2"Wx60'(51mm x 18M)no. 280-1182 3"Wx60'(76mm x 18M)no. 280-1043 4"Wx60'(102mm x 18M)no. 280-1183 6"Wx60'(152mm x 18M)
DUcT TAPEno. 280-1093
•2"x60yd(51mm x 55M)
MASKING TAPE•60yd(55M)
no. 142-1284 1" (25mm) wideno. 142-1285 2" (51mm) wide
ANTI-SLIP SURE TRAcTIoN SPRAyno. 143-1086
•Fortile,concrete,linoleum,wood,steel,etc.•Easytoapply•Quickdrying•Longlasting(upto6months)•Syntheticgritcontainsnosharpedges•HelpsmeetOSHArequirements•Forindoororoutdooruse•12oz(340g) can•Coversapproximately21to23squarefeet
(2 square meters) per can
ANTI-SLIP PADno. 280-1239
•Foruseon6"(152mm) square floor tiles•Self-adhesivebacking•51⁄2" x 51⁄2" (140mm x 140mm)•Soldindividually
FoAM INSULATIoN TAPEno. 124-1020
•Designedtopreventcondensationon pipes and tubing
•Adhesive-backed•Withstandstemperaturesfrom
-20° to 180°F (-29° to 82°C)•1⁄8"thickx2"widex30'(3mm x 51mm x 9M)
MoP-ToP® ANTI-SLIP SAFETy TAPESponges and string-style mops easily glide over tape for faster clean-up. Minimizes fraying and disintegration of sponges and mops.no. 280-1495
•2"Wx60'L(51mm x 18M) roll•Forwood,concrete,ormetalsurfaces•Blackgritmaterialwithadhesivebackcan
be used indoors or outdoors
Aerosol cans cannot ship by air.
HARDWARE
FmPONLINE.COM470
HARDWARE
zINc GALvANIzE SPRAyno. 143-1027
•Ahardzinccoatingthatbonds itself to the surface of metals
•Resistanttosaltspray;protects against rust and corrosion
RUST PREvENTIvE ENAMEL PAINTno. 143-1047 •Silverhammeredfinish
STAINLESS STEEL SPRAy PAINTno. 143-1043
•Providesahard,beautiful,satin finish that resists abrasion and impact
•Tough,scrubbable,durable;excellentforsurfaces that are subject to punishment
•Ratedto500°F(260°C)
SPRAy PAINTSno. 143-1042 Chrome
aluminumno. 143-1044 Flat blackno. 143-1045 Primer grayno. 143-1046 Gloss blackno. 143-1048 Dark gloss gray
FLITz® LIqUID PoLISHno. 143-1077
•Cleans,polishesandsealsto let shine last longer
•Worksonaluminum,bronze, chrome, copper, fiberglass, gold, plastic, silver, and stainless steel
•Non-flammableand non-toxic
•7.6oz(225mL) bottle
FLITz® PASTE METAL/PLASTIc PoLISHno. 143-1008
•Cleans,polishesandsealsto let shine last longer
•Worksonaluminum,bronze, chrome, copper, fiberglass, gold, plastic, silver, and stainless steel
•Non-flammableand non-toxic
•1.76oz(50g) tube
HIGH TEMPERATURE ALUMINUM PAINTno. 143-1051
•Ratedto1000°F(538°C)
Aerosol cans cannot ship by air.
HIGH TEMPERATURE bLAcK PAINTno. 143-1050 •Ratedto1200°F(649°C)
ScRUbS®
cLEANING AND PoLISHING cLoTHSno. 143-1094
•Cleans,polishes,andprotects brass, chrome, stainless steel, and fiberglass
•Premoistenedwith a low ammonia polishing formula
•Non-scratchingabrasivecloth
•Resealablepackageof eighteen 11" x 8" (280mm x 203mm) cloths
SPRAy PAINTno. 143-1041•Glosswhite
HARDWARE
Phone: 800-257-7737 24-Hour Fax: 800-255-9866 471
HARD
WAR
E
SILIcoNE SEALANTno. 143-1057
•3oz(89mL) tube•Ratedfrom-60°to450°F
(-51° to 232°C)•Clear
EPoXy PUTTyMixeslikeputty,hardenslikesteel;itcanbesawed, drilled, and tapped. Works on most metals, on wood, masonry, ceramics, glass, plastic, or porcelain.Setsin5minutes—evenunderwater.Theone-piece formula leaves no leftovers and no mess.
•4oz(114g) tubeno. 142-1128 Gray/greenno. 142-1437 Aquamend
SILIcoNE SEALANTS•10.3oz(305mL) cartridge•Ratedfrom-80°to302°F
(-62° to 150°C) in food contact areas
•Ratedfrom-80°to400°F (-62° to 204°C) in non-contact areas
•FDAapproved
no. 143-1053 Clearno. 143-1054 Aluminumno. 143-1056 White
HIGH TEMPERATURE RED SILIcoNE SEALANTno. 143-1055
•10.3oz(305mL) cartridge•Ratedto500°F(260°C)•FDAapproved
LIqUID WELD EPoXyno. 143-1065
•Superstrongbondwillattachorsealjust about anything•Canbemachined•Waterproof•Epoxyadhesive•Eachtube1oz(28g)
HIGH TEMPERATURE SILIcoNE SEALANTno. 127-1060
•2.8oz(83mL) tube•Ratedto400°F(204°C) •Gray
Aerosol cans cannot ship by air.
FooD GRADE LUbRIcANT DISPLAyno. 143-1107•Includes12cansofFoodGradeLubricants: 4 cans of Food Grade Grease (No. 143-1102) 4 cans of Food Grade Oil (No. 143-1103) 4 cans of Food Grade Silicone (No. 143-1104)•Pre-assembledPointofPurchasedisplay
HARDWARE
FmPONLINE.COM472
HARDWARE
Aerosol cans cannot ship by air.
FooD GRADE SPRAy LUbRIcANTno. 143-1062
•Idealforfoodserviceequipment
•Odorless,tasteless, non-toxic
•USDAauthorize•9oz(255g)
FooD GRADE GREASEno. 143-1064
•Idealforfoodserviceequipment•Odorless,tasteless,non-toxic•Ratedfrom-15°to210°F(-26° to 99°C)•12oz(340g) cartridge
FooD GRADE GREASEno. 143-1063
•Idealforfoodserviceequipment
•Odorless,tasteless, non-toxic
•Ratedfrom -15° to 210°F (-26° to 99°C)
•4oz(113g) tube
HIGH HEAT GRAPHITE GREASEno. 143-1038
•Idealforgasvalves•Resistanttobreakdown
caused by natural, LP and butane gases
•Withstandstemperatures up to 185°F (85°C)
•2oz(57g) tube
HIGH TEMPERATURE LUbRIcANTno. 189-1043
•Fireresistant•Withstandstemperaturesto
540°F (282°C)•4oz(118mL) bottle
HIGH TEMPERATURE FooD GRADE GREASEno. 143-1089
•Idealforfoodserviceequipment•Odorless,tasteless,non-toxic•Ratedfrom-10°to500°F(-23° to 260°C)•14oz(397g) cartridge
FooD GRADE LUbRIcATING oILno. 143-1073•Foruseonfoodprocessing
and dairy machinery •Colorless,odorless,tasteless,non-toxic•USDAratedH1foruseinandaroundfood
processing areas•4oz(118mL) squeeze bottle
LUbRIcATING SILIcoNE AERoSoL SPRAyno. 143-1074•Colorless,tasteless,andnon-toxic•USDAratedH1foruseinand
around food processing areas•11oz(311g) can
luBRiCAnts
SILIcoNE RELEASE AGENT SPRAyno. 143-1061
•Idealforfoodserviceequipment
•Colorless,heatstableandunaffected by water
•USDAauthorized•Ratedfrom350°to600°F
(177° to 316°C)•20oz(568g)
FooD GRADE GREASE SPRAyno. 143-1102 •Idealforfoodserviceequipment•Ratedfrom0°to450°F
(18° to 232°C)•10oz(283g)
FooD GRADE SILIcoNE SPRAyno. 143-1104•Idealforfoodserviceequipment•Ratedfrom-40°to285°F
(-40° to 141°C•11oz(311g)
FooD GRADE oIL SPRAyno. 143-1103•Idealforfoodserviceequipment•Ratedfrom-40°to250°F
(-40° to 121°C)•16oz(453g)