hardware, safety and accessories - … · hardware, safety and accessories ... of its technology of...

Hardware, Safety and Accessories

84 Reliance Group of Companies Supporting Every Industry Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking


2015-02 v.1.1

V Gear PumpThe “V” Gear Pump is a positive displacement pump which features new elements in terms of its technology of fabrication and design. We proudly consider that the “V” Gear Pump represents the ultimate design in its class, based on the original elements we have designed, developed, and implemented.

y Tight tolerances allow greater vacuum abilities for light liquids y The “V” design gears are self-aligning (self-centering) y Zero clearance between shafts and gears means that vibration and

noise are substantially reduced y The axial force produced by angled gears is practically eliminated meaning the end

plates are protected against premature wearing y The symmetrical “V” gear design allows continuous flow with less turbulence.

Cavitation is not present at normal angular speeds y Floating seals installed at each end of the gears y The preliminary dynamic seals protec the main dynamic seals by stopping the heavy

particles coming from the media to the inner lips of the main dynamic seals y With their elastic elements attached they keep the “V” gears balanced by maintaining a

gap between gears and end plates even at low angular speeds y All the above mentioned features contribute to much higher flows, greater efficiencies,

increased suction, decreased fuel consumption and longer pump life

www.relianceindustrial.com Call your local Reliance office to order at 1-877-955-7115 85


2015-02 v.1.1

Reels (Manual or Power Rewind)Series 1500

y To handle single 1/4” through 5/8” I.D. hose y Used for Lawn Care, Pest Control, Pressure Washing, Agriculture, Steam Cleaning,

High Pressure, Water and Air y Lightweight, compact reels designed for long lengths of hose in manual and power rewind y Direct crank rewind is permanently attached y Chain and sprocket drive powered by electric, hydraulic or compressed air motor y Manual reels include cam-lock drag brake, spring actuated pin lock y Standard inlet: 90° ball bearing swivel joint, 1/2” female NPT threads y Standard outlet: 1/2” female NPT threads y Standard pressures to 3000 psi (207 bar), available up to 10,000 psi (690 bar) – must specify y Temperatures from +20°F to +400°F (-7°C to +204°C)

Series 1800 y To handle single 1/4” through 5/8” I.D. hose y Lightweight, compact reels designed for long lengths of hose in manual and power rewind y Direct crank rewind is permanently attached y Chain and sprocket drive powered by electric, hydraulic or compressed air motor y Manual reels include cam-lock drag brake, spring actuated pin lock y Standard inlet: 90° ball bearing swivel joint, 1/2” female NPT threads y Standard outlet: 1/2” female NPT threads y Optional rollers: Specify roller position when ordering y Standard pressures to 3000 psi (207 bar), available up to 10,000 psi (690 bar) – must specify y Temperatures from +20°F to +400°F (-7°C to +204°C)

Series 7500 y To handle 1” through 1-1/2” I.D. hose y Used for Fuel Dispensing, Bulk Transfer, Suction and Discharge y Heavy-duty reel designed for longer lengths y Choose gear-driven crank rewind or chain and sprocket drive powered

by an electric, hydraulic, or compressed air motor y Crank rewind reels supplied with pinion brake and power rewind reels with a comet brake y Standard inlet: 90° ball bearing swivel joint, 1-1/2” female NPT threads

and 2” victaulic groove y Standard outlet: flanged riser, 1-1/2” female NPT threads y Standard inlet, outlet riser, and hub assembly are steel y Rollers may be purchased as accessory items y Operate at pressures to 600 psi (41 bar) y Temperatures from -60° F to +175° F (-51° C to +79° C)

Part No. DescriptionA1514-17-18-LT Left Handed CrankA1514-17-18-RT Right Handed CrankE1520-17-18 Electric Rewind Reel

Part No.: 1830-17-18

Part No.: 7528-19-21



2015-02 v.1.1

Handle-Tech Handle-Tech Handles are a ground breaking safety tool for today’s oil and gas industry and the environmental service industry. The easy to use mechanism enables you to clamp onto hose or pipe easily and allows you to safely grip, torque and release single-handledly through a natural fluid movement.

Through mud, cold, rain, or sleet, Handle-Tech’s innovative design allows your workers to safely and efficiently manipulate hoses and pipes in any climate or location.

y Drilling mud suction hose y Frac pipe y Tanker hoses - diesel, jet fuel y Water pressure hose, fire hose

Part No. Hose O.D. Size300SUC 3” - 3.75”400SUC 4" - 4.75"

Kwik BanditPart No.: 100784-410Our Heavy Duty Kwik Bandit is the strongest version that has become popular with heavy industry and construction. This is the ideal solution for grouping and bundling pipes or securing heavier loads and binding materials during work. The Heavy Duty Kwik Bandit is functional in extreme weather conditions, resistant to sun damage and capable of 75 lbs of tensile strength.

Heavy IndustryThe Kwik Bandit is designed and manufactured to withstand the most extreme Canadian envi-ronments. Many companies hauling fluids and cement use the Heavy Duty Kwik Bandit as a cam lock safety strap.

Safety in the WorkplaceThree easy steps: Stretch, Wrap Lock! One of our goals was to design a product that replaced dangerous binding products that have caused serious workplace injuries from normal operation.

Interlocking TechnologyOur Lock Pin line can easily be used to combine several Standard or Heavy Duty Kwik Bandits together, forming a strong chain that holds a very large diameter. This is a great way to work with very large objects or create tie downs on larger transports.

Uses for Heavy Duty Kwik Bandit: y Cam Lock safety straps y Binding pipes, tubes and other

materials y Organizing large cables and hoses y Securing hoses on tanker truck trays

Note that this device was designed for hand-use only and should only be used as designed



2015-02 v.1.1

Hosebun™ Proper Support For Hoses and Cables!Your hoses and cables are often an expensive and important part in your production processes. But hoses and cables can often be an obstacle and are therefore susceptible to damage that may arise by driving over them, falling down, bending and kinking. This can reduce the lifespan of your hoses or cables significantly. The Hosebun™ offers optimal support and protection, and guarantees the flow of the substance you want to transport through the hose or cable. The Hosebun™ therefore increases the lifespan of your expensive hoses and cables considerably, and ensures that the flow remains optimal.

Optimal SupportThe specially developed shape of the Hosebun™ saddle, made from strong polyurethane material, results in the Hosebun™ providing optimal support for your hose or cable.

Optimal ProtectionWhether it’s liquid, solids and/or other media, the flow through your hose or cable combined with the Hosebun™ is optimal, and without constrictions or blockages due to being suspended.

Optimal FlowHosebun™ supports your hose or cable to create an optimal flow, and to prevent any delays in the production process.

Invest to save costsBesides significantly expanding the life of your hoses and/or cables with the use of the Hosebun™, the delays in your production process due to constric-tion, damage or breakage are greatly reduced.

Hosehorse y Molded plastic hose stands y Available in Orange, Yellow and Red y Contoured radius accommodates

any size hose from 2” to 24” y Reflective decals y Molded handles or Rope handles y Meets FDA sanitary hose regulations y Stackable,Durable y Weight: From 4 - 18 lbs (depends on model) y Height: From 11” to 42” high (depends on model)

Hose HOG (Hose Off Ground) y Made of Polyurethane y Contoured radius accommodates size hoses 2”, 3” and 4” y Lightweight and easy to set up on your truck y The ground hoseHOG will save your hoses, save you money

and help prevent fluid leaks for just pennies

Hosebun y Comes with Hose Saddle and type 4 hook eye or D-Ring sling y Made of Polyurethane y Color: Signal Red y Max. Temperature Range: ± 90° C. y Hosebun is available in size 1” to 12”

Part No. DescriptionHB100D 1” Hose I.D. HB200D 2” Hose I.D. HB300D 3” Hose I.D. HB400D 4” Hose I.D.



2015-02 v.1.1

Installation AccessoriesMounting, Windshield and Replacement Kits are available

Quad Stack High Intensity LightbarOur Reactor series is the ultimate bar available with the most size options, best optics and the absolute most light possible. Our Reactor models guarantee no need to compromise and use our UHP 3W CREE light engine for maximum output!

y Operating Voltage: 10-32V DC y Waterproof Rating: IP 67 y Color Temperature: 6000K y Light Engine: CREE - 3W UHP ULTRA Chip y Housing: Die-cast Aluminum y Lens: Polished Polycarbonate y Mounting Bracket: Low-profile adjustable bottom posts y 50,000 Hour Lifetime y 5 year instant replacement warranty y Quick-Connect Deutsche connector

All Reactor models are available in: y 8 degree spot light y 90 degree flood light y Numerous custom configurations for maximum flexibility y Available in black or white housing (marine)

Reactor (RCS series) Part No. Size Power Light OutputRCS-36 4” 36W 2,520 LumensRCS-72 7” 72W 5,040 LumensRCS-108 9” 108W 7,560 LumensRCS-144 12” 144W 10,080 LumensRCS-180 15” 240W 12,600 LumensRCS-252 20” 252W 17,640 LumensRCS-468 36” 468W 32,760 Lumens

Double Row Curved LightbarThe absolute best light coverage possible in a single bar! Ideal for mounting on roof racks or curved bumpers and grilles. Available in 20”, 30”, 40” and 50” sizes. Flood, Spot & Combo configurations.

y Operating Voltage: 10-30V DC y Waterproof Rating: IP 67 y Color Temperature: 6000K y Light Engine: CREE - 3W High Output Chip y Housing: Die-cast Aluminum y Lens: Polished Polycarbonate y Mounting Bracket: Adjustable Wings y 50,000 Hour Lifetime y 5 Year Instant Replacement Warranty

High Roller (HR Series) Part No. Size Power Light OutputHRC-20 20” 120W 9,000 LumensHRC-30 30” 180W 13,500 LumensHRC-40 40” 240W 18,000 LumensHRC-50 50” 288W 21,600 Lumens

Our Curved Lightbars provide as much as 60% more coverage over our traditional straight models.

LED Lightbars and Work Lights



2015-02 v.1.1

Single Row High Output LightbarEvery PERSUADER model utilizes our UHP 10W CREE based Light engine featuring specialized optics providing amazing beam throw distance and uniform ULTRA brightness. Available in Spot, Flood & Combo arrays

y Operating Voltage: 10-32V DC y Waterproof Rating: IP 67 y Color Temperature: 6000K y Light Engine: CREE - 10W UHP ULTRA Chip y Housing: Die-cast Aluminum y Lens: Polished Polycarbonate y Mounting Bracket: Low-profile Sliding bottom posts y 50,000 Hour Lifetime y 5 Year Instant Replacement Warranty y Quick-Connect Deutsche connector

Persuader (PSX Series) Part No. Size Power Light OutputPSX-20 4.6” 20W 1,720 LumensPSX-40 7.8” 40W 3,440 Lumens PSX-60 10.9” 60W 5,160 LumensPSX-100 17.2” 100W 8,600 LumensPSX-120 20.3” 120W 10,320 LumensPSX-180 29.3” 180W 15,480 LumensPSX-240 39.1” 240W 20,640 LumensPSX-260 42.4” 260W 22,360 Lumens

Double Row High Output LightbarEvery PERSUADER model utilizes our UHP 10W CREE based Light engine featuring specialized optics providing amazing beam throw distance and uniform ULTRA brightness. Available in Spot, Flood & Combo arrays

y Operating Voltage: 10-32V DC y Waterproof Rating: IP 67 y Color Temperature: 6000K y Light Engine: CREE - 10W UHP ULTRA Chip y Housing: Die-cast Aluminum y Lens: Polished Polycarbonate y Mounting Bracket: Low-profile Sliding bottom posts y 50,000 Hour Lifetime y 5 Year Instant Replacement Warranty y Quick-Connect Deutsche connector

Persuader MX (PMX Series) Part No. Size Power Light OutputPMX-40 4.6” 40W 3,440 LumensPMX-80 7.8” 80W 6,880 LumensPMX-120 10.9” 120W 10,320 LumensPMX-200 17.2” 200W 17,200 LumensPMX-240 20.3” 240W 20,640 Lumens



2015-02 v.1.1

Dual Stack Powerbase LightbarThe One That STARTED it ALL! The LAUNCH series is our baseline lightbar series.Value priced lighting that will launch your off-road lighting needs in the right direction. Available in both CREE and EPISTAR light engine power for Maximum choice and cost flexibility.All LAUNCH models can be purchased in spot, flood and combo configurations.

y Operating Voltage: 10-32V DC y Waterproof Rating: IP 67 y Color Temperature: 6000K y Light Engine: CREE or Epistar 3W High Output Chip y Housing: Die-cast Aluminum y Lens: Polished Polycarbonate y Mounting Bracket: Sliding adjustable bottom posts y 50,000 Hour Lifetime y 5 year instant replacement warranty

Launch (LX Series) Part No. Size Power Light OutputLXC-36 7.5” 36W 2,520 LumensLXC-72 13.5” 72W 5,040 LumensLXC-120 21.5” 120W 8,400 LumensLXC-180 31.5” 180W 12,600 LumensLXC-240 41.5” 240W 16,800 LumensLXC-300 50” 300W 21,000 Lumens

Single Stack Mega Output LightbarThe BARRAGE MINI is the svelte version of the extremely popular BARRAGE series and packs a big punch in a small box. This ultra powerful light engine uses our UHP 10W CREE chips with advanced 3D optics. A clean, form fitting fixture that can go anywhere featuring adjustable bottom post EZ-mounts that can be attached at any location along the bar to fit any pre-drilled brush/push bar.

y Operating Voltage: 10-32V DC y Waterproof Rating: IP 67 y Color Temperature: 6000K y Light Engine: CREE - 10W UHP ULTRA Chip y Housing: Die-cast Aluminum y Lens: Polished Polycarbonate y Mounting Bracket: Sliding adjustable bottom posts y 50,000 Hour Lifetime y 5 year instant replacement warranty

Barrage Mini (BGM Series) Part No. Size Power Light OutputBGM-20 5” 20W 1,900 LumensBGM-40 9” 40W 3,800 LumensBGM-80 17” 80W 7,600 LumensBGM-120 25” 120W 11,400 LumensBGM-180 37” 180W 17,100 Lumens



2015-02 v.1.1

Mixed Array Combination LightbarOur FUSION SERIES bring two PowerHouse Lightbars together in one compact, effective package. By combining our 8 degree laser focused spotlight and 90 degree ultra floodlight, you now never have to be without enough light to get the job done. All FUSION series models are complete with separate wiring for each array type to give you complete control with the included 4 way switch and harness.

y Operating Voltage: 10-32V DC y Waterproof Rating: IP 67 y Color Temperature: 6000K y Light Engine: CREE High Output Multi Chip y Housing: Die-cast Aluminum y Lens: Polished Polycarbonate y Mounting Bracket: Side-Mount Adjustable Wings y 50,000 Hour Lifetime y 5 Year Instant Replacement Warranty

Fusion (FSX Series) Part No. Size Power Light OutputFSX-68 13.5” 20W 5,080 Lumens FSX-112 21.5” 112W 8,480 Lumens FSX-212 41.5” 212W 17,080 LumensFSX-264 50” 264W 20,400 Lumens

Spotlight OpticsFloodlight

OpticsFloodlight

Optics



2015-02 v.1.1

AMSOIL Premium Synthetic Motor Oil and Lubricants provide optimum performance for your cars, trucks, SUV’s, motorcycles, boats, 2 cycle, equipment and machinery.

AMSOIL Synthetic Oils and Lubricants also provide the best protection for your invest-ment, extend equipment life, lower operating and fuel costs, and provide environ-mentally friendly solutions. AMSOIL formulates the widest selection of synthetic oils and lubricants available for all types of automotive, diesel, racing, fleet, marine, farm and agricultural, 2-cycle and industrial applications. AMSOIL has developed sophisti-cated, high performance nanofiber oil filters, bypass oil filters, nanofiber reusable air filters, gasoline and diesel fuel additives and other companion products that extend equipment life and lubricant performance.

Premium Synthetic 15W-40 Diesel Oil

y Meets Emission System Requirements y Extended Drain Performance y Controls Soot-Thickening and Wear y Superior Shear Stability, Reduced Oil

Consumption y Ideal for FleetsPart No. DescriptionDMEQTCA 946 ml / 32 oz. bottle

SAE 5W-20 Signature Series 100% Synthetic Motor Oil

y Extends Drain Intervals y Maximizes Fuel Economy y Reduces Engine Wear y Reduces Oil Consumption and Emissions y Excels in Extreme TemperaturesPart No. DescriptionALMQTCCA 946 ml / 32 oz. bottle

Premium Synthetic 5W-40 Diesel Oil

y Meets Emission System Requirements y Extended Drain Performance y Improves Fuel Economy y Minimizes Oil Consumption and Emissions y Controls Soot-Thickening and Wear Part No. DescriptionDEOQTCA 946 ml / 32 oz. bottle

Diesel Injector Clean y Formulated for all diesel fuel systems, in-

cluding high-pressure common-rail designs y Cleans dirty injectors y Improves fuel economy up to 4.5 percent y Improves power and torque y Minimizes Soot-Loading y Separates Fuel and Water Part No. DescriptionADFCNCCA 473 ml / 16 oz. bottle

AMSOIL



2015-02 v.1.1

Jump Start Starting Fluid JUMP START Starting Fluid assures fast, economical starts in cold or humid conditions. Also contains an upper cylinder lubricant to minimize wear during cold starts

y For use in both gasoline & diesel engines. Spray in air intake or air cleaner while engine is off

Part No. Description75671 312 g / 11 oz.

Quick Flow® Emergency Diesel-Gel Relief

y Totally disperses water and lowers pout point by as much as 35°F

y Prevents future gelling since it contains anti-gel

y No additional products needed for optimum performance

Part No. Description75911 946 ml / 32 oz.

Air Brake Anti Freeze y Provides complete winter protection for all

brake systems y Will eliminate and prevent moisture

|accumulation and icing

Part No. DescriptionABAF1 946 ml / 32 oz.ABAF4 3.79 L / 1 gal.

Brakleen™ Brake Parts Cleaner (Non-Chlorinated)Brake Cleaner to use where compliance calls for a chlorine-free product. • Formulated to quickly remove brake fluid, grease, oil, and other contaminants from brake linings and pads

Part No. Description75088 397 g / 14 oz.

Brakleen™ Brake Parts Cleaner Formulated to quickly & effective remove grease, brake dust, brake fluids, oils, & other contaminants from brake parts, lining, pads

Part No. Description75089 539 g / 19 oz.75090 3.79 L / 1 gal.75091 19 L / 5 gal.

CRC



2015-02 v.1.1

Flame-Resistant Extremes Arctic CoatPart No.: 100784-410

y 9-ounce FR canvas 88% cotton/12% high-tenacity nylon

y Unique Sherpa-lined interior back panel for increased warmth

y Fully Insulated with 3M® Thinsulate® 200-gram Platinum

y Left chest pocket has a radio integration pass-through slot

y Four generous interior pockets, two upper and two lower

y Insulated stand-up collar y Available in Regular Sizes Small to 4XL y Available in Tall Sizes from Large to 3XL

Flame-Resistant Extremes Arctic BiberallPart No.: 100785-410

y 9-ounce FR canvas 88% cotton/12% high-tenacity nylon

y Fully Insulated with 3M® Thinsulate® 200gram Platinum

y Ankle-to-thigh zippers with interior/exteri-or storm flaps

y 3M® Scotchlite® reflective trim (#8940) around legs

y Heavy duty Vislon two-way zipper with Nomex™ FR zipper tape

y Full-length interior/exterior storm flap and hook-and-loop closure

y Available in Regular Sizes Small to 4XL y Available in Tall Sizes from Large to 3XL

Flame-Resistant Duck Bib Overall/UnlinedPart No.: FRR45

y 13-ounce, 100% cotton FR Duck y High back with FR elastic suspenders and

FR center-release buckles y Chap-style double-front enhances durabili-

ty and Multiple tool and utility pockets y Ankle-to-above knee brass leg zippers with

Nomex™ FR zipper tape and protective flaps with arc-resistant snap closures

y FR melamine buttons at waist and brass zipper fly with Nomex™ FR zipper tape

y Carhartt FR and HRC 2 labels sewn on left-chest pocket

y Meets the performance requirements of NFPA 70E

y For the best fit, order one size larger in waist and one size shorter for inseam length. If wearing heavy layers, order two sizes larger in waist.

y Available Colours: Black, Carhartt Brown or Dark Navy

y Available in Sizes: 30 to 54 inches wide in various lengths

Flame-Resistant Grid BeaniePart No.: 100492

y Our FR beanie is made from 11.9-ounce, FR Polartec™ Power Stretch™ fabric: 67% modacrylic/29% rayon/4% spandex

y Its grid construction maximizes warmth, minimizes weight, and enhances breathability

y It wicks moisture for comfort y Meets the performance requirements of NFPA 70E y Available in Black, Carhartt Brown,

Dark Navy or Steel

Flame-Resistant Clothing



2015-02 v.1.1

Flame-Resistant Duck Bib Overall/Quilt LinedPart No.: FRR44

y Made of 13-ounce, flame-resistant 100% cotton duck, it features a quilt lining, a high back with flame-resistant elastic suspenders and high temperature nylon center-release buckles

y They also have a chap-style double front for durability, flame-resistant melamine button at waist, multiple tool and utility pockets, ankle-to-mid-thigh brass leg zippers with Nomex™ zipper tape and protective flaps and arc-resistant snap closures

y NFPA 70E compliant y Ankle-to-thigh leg zippers y For the best fit, order one size larger in waist and

one size shorter for inseam length. If wearing heavy layers, order two sizes larger in waist.

y Available Colours: Black, Carhartt Brown, Dark Navy or Steel y Available in Sizes: 30 to 54 inches wide in various lengths

Flame-Resistant Duck Traditional Coat/Quilt-LinedPart No.: FRC066

y Protect yourself from flash fire or elec-tric arcs on the job

y Our flame-resistant duck tradition-al coat is quilt-lined and made of 13-ounce flame-resistant, 100% cotton duck

y It features two inside patch pockets with flame-resistant hook-and-loop closures, Nomex™ inside-waist drawcord for an adjustable fit, rib-knit’storm cuffs to seal out cold air, a two-way brass zipper and snaps under the collar for an optional hood (FRA265)

y NFPA 70E compliant y Available Colours: Black, Carhartt Brown, Dark Navy or Steel y Available in Regular Sizes Small to 4XL y Available in Tall Sizes from Large to 3XL

Flame-Resistant Hard Hat LinerPart No.: 101200

y Made of 9-ounce, 100% cotton FR twill with an 11.7-ounce Polartec™ Power Stretch™ fabric lining

y There are inside warming pouch pockets over the ears, and a lower front closure to keep out wind and protect the neck

y Meets the performance requirements of NFPA 70E

y Available in One Size

Flame-Resistant Fleece 2-in-1 Knit HatPart No.: 100164-410

y Hat by itself or hat with face mask, our flame-resistant fleece 2-in-1 knit hat works two ways to provide comfort and protection

y Pull down the face mask when weather threatens, or tuck it up into the hat and out of the way when conditions permit

y The hat is constructed of 7.5-ounce, Nomex™ IIIA fleece, and the pull down/up face mask is a 6-ounce blend of 48% mo-dacrylic and 48% Tencel™ with 4% spandex for comfort and stretch

y Meets NFPA 70E, HRC 2 and ATPV 15 standards

y Available in One Size



2015-02 v.1.1

Airlok Waterproof Footwear y Rated for -50ºC y Composite toe and non-metallic midsole

provides full safety protection and in-creased thermal insulation in cold weather

y Winter tire tread inspired tread pattern features wider and deeper dispersion lines designed to pull water up and away from the contact point in the sole and ground for greater slip resistance

y Lightweight and comfortable with an innovative heel-tab for easy removal

y Reinforced ankle protection and extra ankle room to prevent rubbing

y Upper grip on boot allows you to easily put on boots even when wet or muddy

y Ergonomically designed upper boot to allow for a better range of movement at the calf

y Mineral, Organic and Chemical Resistant Part No. DescriptionB105FULGR08 Small (8)B105FULGR09 Medium (9)B105FULGR10 Large (10)B105FULGR11 XL (11)B105FULGR12 XXL (12)B105FULGR13 XXXL (13)

FR DRY-GEAR™ WCBBC Jacket

y Fluorescent Orange 5oz/yd² FR PU/Knit Polyester

y 3M® Scotchlite® yellow high gloss vinyl striping meets WCBBC standards

y Raglan sleeves y Fabric stretches up to 150% y Excellent cold flex y Oil resistant and Snag resistant y Recommended for “Momentary Protection

from Open Flame”Part No. DescriptionJ12501S SJ12501M MJ12501L LJ12501XL XLJ125012XL 2XLJ125013XL 3XLJ125014XL 4XL

Element FR™CSA 3 Piece Suit

y All 3 pieces sold as one suit: Jacket, Pant, Hood

y Hi-Viz Orange 13 oz./yd² FR PVC/Polyester y Oil resistant y Good tear and snag resistance y Extremely durable and comfortable y Remains flexible in cold conditions y Permanently welded seams y Generous styling fits over work clothesPart No. DescriptionR85S SR85M MR85L LR85XL XLR852XL 2XLR853XL 3XLR854XL 4XL

Rain Gear

Windshield Washer FluidPart No. Description128229 Winter 3.79 L / 1 gal. WWF-SUMMER Summer 3.79 L / 1 gal.



2015-02 v.1.1

Super Green King™ Striker® y High visibility impact patch y Excellent grip in oil based applications y 3/ 8” back hand impact protection y Withstands multiple washings y Heavy cotton fleece keep hands warm

in cold conditions and wicks moisture in warm conditions

y Most recommended glove in the drilling industry by workers

Part No. DescriptionSGKSTR One Size

Kevlar™ Palm Coated y 100% Kevlar™ knit y Nitrile coated palm y DuPont Kevlar™ shell protects against cuts,

slashes and abrasionsCoated palm resists punctures while still allowing excellent manual dexterity

y Allows for excellent tactile sensitivityPart No. DescriptionY9256M M (9)Y9256L L (10)Y9256XL XL (11)

PetroChief® y Color red and Grip Coated y Double-dipped finish allows the wearer an

incredible grip in wet and oily conditions y All coated safety cuff y Range of different liners ensures comfort

regardless of the temperaturePart No. DescriptionPC830L L (10) - Jersey LinedPC893L L (10) - Foam lined (Winter)

91426 Winter Whammy y Foam lining y Durable split-grain

cowhide leather y Cotton drill back y Full leather index finger y Hooded fingertips y Pulse protector and

knuckle bar y Shirred elastic wrist y Slip-on style safety cuffPart No. Description91426 One Size

94007 Siberian Express y 3M Thinsulate® C100 lining y Full-grain pigskin leather y Palm patch y Cotton drill back y Shirred elastic wrist y Slip-on style safety cuff Part No. Description94007 One Size

1426B Econo Split y Split cowhide leather y Cotton drill back y Shirred elastic wrist y Slip-on style safety cuff Part No. Description1426B One Size

A281E Rawhide y Economy-grade full-grain

cowhide leather y Cotton drill back y Outside elastic wrist y Slip-on style safety cuff Part No. DescriptionA281EXL XL (11)A281EXXL XXL (12)

Gloves



2015-02 v.1.1

Genesis® Glasses y Wraparound 9-base lens style, uncompromised peripheral vision,

superior coverage and adjustable temple length and lens inclination y Soft elastomer browguard diffuses and deflects impact y Nosepiece with soft flexible “fingers” adjusts and conforms

to almost any nasal profile to reduce slippage y Meets the ANSI Z87.1-2010 standard y Certified to the requirements of the CSA Z94.3 standardPart No. DescriptionS3200X Black Frame, Clear Lens TintS3202X Black Frame, Amber Lens TintS3204 Black Frame, SCT-Reflect 50 Lens TintS3205X Black Frame, SCT-Gray Lens TintS3209 Black Frame, SCT-Low IR Lens TintS3211X Black Frame, SCT-Blue Lens TintS3240X Vapor Blue Frame, Clear Lens TintS3241X Vapor Blue Frame, Espresso Lens TintS3242 Vapor Blue Frame, Amber Lens Tint

Ztek and Mini Ztek Glasses y Economical Wrap-Around Single Lens Provides Full Panoramic View y Soft Non-Slip Rubber Temple Tips Provide Non-Binding Fit y Integrated Nose Piece y Exceeds ANSI Z87.1 High Impact Requirements,

CE EN166 Certified, CAN/CSA Z94.3-07Part No. DescriptionS2510S Clear LensS2515S Coffee LensS2520S Gray LensS2530S Amber LensS2560ST Infinity Blue LensS2570S Gray Polycarbonate Lens With Silver Mirror Coating.S2580S Indoor/Outdoor Mirror LensS2510SN Mini Ztek Clear LensS2520SN Mini Ztek Gray LensS2530SN Mini Ztek Amber LensS2580SN Mini Ztek Indoor/Outdoor Mirror Lens

Safety Glasses



2015-02 v.1.1

Spill Kit y 1-plastic keg 9 gal. with lid and lock ring y 1-pair of gloves y 1-pair nitrile goggles y 2-heavy duty disposal bags w/ties y 1-neoprene drain cover y 2-absorbant socks, 48” long y 20 absorbant pads y 1-patch stickPart No. DescriptionSK64529 Spill Kit

Bear Spray y Glow in the Dark Top y Safety Lanyard y Brushed Aluminum Can y 0.98% Capsaicin y Comes with HolsterPart No. DescriptionBBP0010 225 g

Traffic Vest y Adjustable Sizing y Hi Viz Fluorescent Orange Polyester Mesh Material y Reflective Material Meets WCB PP2 High Visibility Garment Standards y Illumination 330 y Two Breast Pockets y Two Front Pockets y Safety Harness D Ring Slot with Closure y Velcro Closure with 5 Point Tearaway y Hand Wash Cold Water and Hang to DryPart No. DescriptionETV1001 One Size

Triangular Reflector Kit y Triangular Reflector Kit - set of 3 y Heavy weighted base y Reusable storage containerPart No. DescriptionXG29 Set of 3 - Triangular Reflector

First Aid KitKit Content:

y First aid manual: 1 y Safety pins (pack of 12): 1 y Tweezers kit: 1 y Scissor kit: 1 y Plastic adhesive strip 3/4” x 3” sterile: 25 y Pressure bandage 4” sterile: 2 y Pressure bandage 6” sterile: 2 y Gauze pad 4” x 4” sterile: 10 y Tensor bandage 3”: 1 y Conform bandage 3” x 5: 2 y Triangular bandage: 2 y Rescue breather: 1

y Ziplock bag 8 x 10: 1 y Antiseptic Benzalkonium sachets: 10 y Nitrile disposable gloves (1 pair): 4Part No. DescriptionFAKALT1BM First Aid kit AB #1

More Safety



2015-02 v.1.1

Energizer Industrial Alkaline Batteries

Part No. DescriptionE96BP2 AAAAEN91 AAEN92 AAAEN93 CEN95 DEN22 9V

Energizer® Intrinsically Safe® 2D LED Flashlight

y Class 1 Division 1 rated y Impact resistant y Built-in carabiner belt clip y Oil and grease resistant body y Waterproof y 60 lumens, runtime 70 hourPart No. DescriptionMS2DLED 2 D Battery Flashlight

Waterproof Lantern Explosion Proof Light

y Constructed of Polypropylene, Polycarbonate and Unbreakable Tuflexx

y 15 Hour Operating Lamp Life y Powered by Alkaline or Carbon Zinc 6V y 50,000 Beam CandlepowerPart No. Description459 Lantern

6v Lantern Battery y Ready to Use for up to 3 Years

*when not in use y Zero Added Mercury and

Cadmium y Quality Seal for Trusted Power

Part No. Description1209 6v Lantern Battery

General Use Vinyl Electrical Tape3M™ Temflex™ Electrical Tape 1700 is a good quality, economical general purpose vinyl insulating tape. It has excellent resistance to abrasion, moisture, alkalies, acid, copper corro-sion and varying weather conditions.

Part No. Description6140 Tape, 3/4 in x 66 ft

(19 mm x 20 m)

Hurricane Tape™A high strength, high tack pressure sensitive tape designed to vastly outperform most or all utility tapes on the market today. With seven standard sizes and 5 available colors, HUR-RICANE TAPE™ will resist 50-100 times more than the competition against tearing, flaking, decay and breakdown.

Part No. DescriptionHTAPE1X60 1 in x 180 ft HTAPE2X20 2 in X 60 ftHTAPE2X60 2 in X 180 ftHTAPE3X60 3 in X 180 ft

ABC Dry Chemical Fire Extinguisher

y Durable High Gloss Polyester Powder Paint y All Metal Valve Construction y Aluminum Valve - Light to Medium Duty y Temperature Range -65°F to 120°F y Dependable Drawn Steel Cylinders Part No. DescriptionA411X 20lbB417TX 2.5lb with vehicle bracketB456X 10lbB500TX 5lb with vehicle bracket

Accessories



2015-02 v.1.1

Ratchet Type Load BinderPart No. Description38-12RB Load Binder

Come Along (Cable Puller) Part No. Description80263 1.5 Ton Lever Puller

Shackle Bolts (G-2130)Part No. Description1019466 1/4 inch1019470 3/8 inch1019472 1/2 inch1019490 5/8 inch1019515 3/4 inch1019533 7/8 inch1019551 1 inch

Nylon SlingsPart No. DescriptionNYLEE2901X6T4 1” x 6’NYLEE2901X8T4 1” x 6’NYLEE2902X2T4 2” x 2’NYLEE2902X4T4 2” x 4’NYLEE2902X6T4 2” x 6’NYLEE2902X8T4 3” x 8’NYLEE2902X10T4 2” x 10’NYLEE2902X12T4 2” x 12’NYLEE2903X6T4 3” x 6’NYLEE2903X8T4 3” x 8’NYLEE2903X14T4 3” x 14’NYLEE2904X12T4 4” x 12’

Nylon RopesPart No. DescriptionROPENYLON14 1/4 inchROPENYLON12 1/2 inchROPENYLON34 3/4 inch1 NYLONROPE 1 inch

Clevis Grab HooksPart No. DescriptionCLEVIS14 1/4 inchCLEVIS516 5/16 inchCLEVIS38 3/8 inchCLEVIS12 1/2 inch

Sash CordsPart No. Description12SASH #16, 1/2 inch x 100’516SASH-FT #10, 5/16 inch x 100’

Ratchet StrapsPart No. DescriptionRS10016W 1 inch x 16 ‘RS2X25 2 inch x 25 ‘RS2X30 2 inch x 25 ‘

EPDM Tarp StrapsPart No. DescriptionRS10016W 1 inch x 16 ‘RS2X25 2 inch x 25 ‘RS2X30 2 inch x 30 ‘

Document HolderPart No. Description1589 9 inch long

PremiumProducts,ExceptionalService

Reliance is your Eaton Platinum Distributor

More Locations to Serve You Better

Toll Free: 1 877 955 7115www.relianceindustrial.com

Head Office (Nisku AB)606 - 19 AvenueNisku, AB T9E 7W1 Tel: 780.955.7115 Fax: 780.955.7121

BrooksBay 3 & 4, 515 – 1st Ave EastBrooks, AB T1R 0H1 Tel: 403.362.4562 Fax: 403.362.4486

Calgary #129-7007 54 St. SE Calgary, AB T2C 3C2 Tel: 403.720.0767 Fax: 403.720.8719

Clairmont 8301 98 StreetClairmont, AB T0H 0W0 Tel: 780.532.4673 Fax: 780.532.4370

Dawson Creek 2612 92 AvenueDawson Creek, BC V1G 4G7 Tel: 250.782.1172 Fax: 250.782.1173

Greeley 2030 E. – 8 St., Suite BGreeley, CO 80631 Tel: 970.346.3751 Fax: 970.353.3168

Houston4115 Kreinhop Road Suite 124Spring, TX 77388 Tel: 281.288.9720

Midland 2904 S County Road 1250Midland, TX 79706-2639 Tel: 432.689.0102 Fax: 432.699.4898

San Antonio 4327 Centergate St.San Antonio, TX 78217 Tel: 210.650.3636 Fax: 210.650.3133

Shreveport 1001 M and O DriveBossier City, LA 71111 Tel: 318.687.5486 Fax: 318.687.5491

Williston 4970 Highway 85Williston, ND 58801 Tel: 701.572.7035 Fax: 701.572.70300

Edson 4637 3 AvenueEdson, AB T7E 1C2 Tel: 780.723.5927 Fax: 780.723.5714

Grande Prairie11450 98 Avenue Grande Prairie, AB T8V 7P4 Tel: 780.532.4702 Fax: 780.539.5510

Lloydminster 5801 63 AvenueLloydminster, AB T9V 3C3 Tel: 780.872.5635 Fax: 780.872.5634

Redcliff #1, 123 Lockwood St. NERedcliff, AB T0J 2P0 Tel: 403.548.7230 Fax: 403.548.7251

Red Deer #110, 7660 76 St. CloseRed Deer, AB T4P 4G6 Tel: 403.309.6729 Fax: 403.309.6780

Reliance Design and Manufacturing: 780.955.3080 | Reliance Hydraulic Services: 780.955.2042Reliance Safety Supply and Service: 780.955.7115 | Reliance Commercial Sign Printing: 780.955.7115

Servco Oilfield Supply: 780.955.7444

hardware, safety and accessories - … · hardware, safety and accessories ... of its technology of...

Documents