Hardy-Weinberg Activity Microevolution in the Eastern Gray Squirrel

Gray Variant (wild type)

Black Variant (mutant)

Squirrels competing for limited resources in their environment

INTRODUCTION

What do porcupines, flying squirrels, beavers, mice, and naked mole rats all have in common? They belong to one of the most diverse and successful of all mammals – the rodents. In fact, forty percent of all species of mammals are rodents. Living worldwide in extremely varied habitats, from tropical sea shores to icy mountain ranges, rodents demonstrate the adaptability of life. But how did these chisel-toothed creatures adapt to such extremes?

Evolution, on a genetic level, is a change in the frequency of alleles in a population over time. The Eastern Gray Squirrel (Sciurus carolinensis) demonstrates evolution in action. This familiar species, commonly seen pillaging bird feeders and scampering about trees in neighborhoods around Acton, has a geographical range that extends from Florida up through Canada and into the Midwest. Surprising to many, the “gray” squirrel has a black variant that can be born from normal gray-furred parents. Such offspring contain a mutation that causes more melanin to be concentrated in their hairs, giving these squirrels a black appearance. Offspring born from such mutants are likely to inherent this trait since it is a dominant allele.

PURPOSE In this activity you will investigate a mystery: black squirrels, usually very rare, are common in concentrated populations in some parks throughout Eastern North America, especially in colder city parks around the Great Lakes of America and Canada. What biological process or mechanism might account for this? Can we model how this might work?

BACKGROUND As we have seen with these squirrels, some alleles may be more common than others in a gene pool. For example, let’s suppose that if we counted all the squirrels around the ABRHS campus, we found the population to be 20% black and 80% gray. The gene frequency in a population for the Hardy-Weinberg Equilibrium is written as:

pp : 2pq : qq

or p2 + 2pq + q2 = 1 where p = the frequency of the dominant allrecessive allele (gray). It follows that p + q For this population, qq = .80. Therefore, thin this small gene pool. So, the frequency ogenes for fur color. In other words, squirrelgene make up about 1% (.11 x .11) of the to.89) are the heterozygotes, and 80% are the MATERIALS (per group) Beaker of grayish beans Beaker black beans 1 plastic bag 3 empty beakers Masking tape PROCEDURE 1. Get into a group of 4-5 people and get the 2. The black beans represent the allele for ballele for gray fur. The plastic bag representwhere the squirrels randomly mate. 3. Label one beaker “Black Fur, FF” for thesecond beaker “Black Fur, Ff” for the hetero“Gray Fur, ff” for those squirrels with the h

Black Fur FF

Black Fur Ff

Beakers:

Key Genotypes: Black phenotype homo dom. = hetero. =

Gray phenotype homo rec. =

ele (black) , and q = the frequency of the = 100% of all the genes in the gene pool.

e square root of .80 = .89, or 89% of the genes f the dominant allele must be 11% of the total s which are homozygous for the dominant tal population. While 19% (2pq = 2 x .11 x homozygous recessive individuals.

materials listed above (6 groups in a class).

lack fur, and the grayish beans represent the s the environment in eastern North America

homozygous dominant genotype. Label a zygous condition. Label the third beaker

omozygous recessive genotype. (See below):

Gray Fur ff

4. Each group will start with 25 black and 25 gray beans. Put the fifty beans (representing alleles) into the plastic bag and shake it up (represents a mixing of alleles via reproduction between squirrels). 5. The six lab groups will now be assigned to a scenario: “Scenario #1 – the Hardy-Weinberg Equilibrium,” “Scenario #2 – Natural Selection,” and “Scenario #3 – Genetic Drift.” Notice that since there are six lab groups, two groups will be doing one of these three situations. Scenario #1 – Hardy-Weinberg Equilibrium: a) Without looking at the beans, select two at a time, and record the results on the data form on the following page - next to "Generation 1." For instance, if you draw one black and one gray bean, place a mark in the chart under "Number of Ff individuals." Continue drawing pairs of beans and recording the results in your chart until all beans have been selected and sorted. (Please note that the total number of individuals will be half the total number of beans because each squirrel requires two alleles.) b) For this simulation, count the F and f alleles (beans) that were placed in each of the beakers for "black squirrels" in the first round and record the number in the chart in the columns labeled "Number of F Alleles" and "Number of f Alleles." Repeat this step for the “gray squirrels.” Total the number of F alleles and f alleles for the first generation and record this number in the column labeled "Total Number of Alleles." Below is a sample of how your results might look:

Generation

Number of FF

Individuals

Number of Ff

Individuals

Number of ff

Individuals

Number of F Alleles

Number of f Alleles

Total Number of

Alleles

Gene Frequency

of F

Gene Frequency

of f 1 xxxxxx

xxxxxxxx xxxx

xxxxxxx

24

26

50

c) Place the alleles of the squirrels (which have grown, survived and reached reproductive age) back into the plastic bag and mate them (shake bag) again to get the next generation. d) Repeat steps “a” through “c” to obtain generations two through five. Try to make sure everyone in your group has a chance to either select the beans or record the results. e) Determine the gene frequency of F and f for each generation and record them in the chart in the columns labeled "Gene Frequency F" and "Gene Frequency f." To find the gene frequency of F, divide the number of F by the total, and to find the gene frequency of f, divide the number of f by the total. Express results in decimal form. The sum of the frequency of F and f should equal one for each generation.

DATA – SCENARIO #1 (HARDY-WEINBERG EQUILIBRIUM) Generation Number

of FF Individuals

Number of Ff

Individuals

Number of ff

Individuals

Number of F Alleles

Number of f

Alleles

Total Number

of Alleles

Gene Frequency

of F

Gene Frequency

of f 1 2 3 4 5 Scenario #2 – Natural Selection: a) As with the Hardy-Weinberg scenario, your group will start with 25 black and 25 gray beans. Put the fifty beans (representing alleles) into the plastic bag and shake it up (represents a mixing of alleles via reproduction between squirrels). b) Select two beans (alleles) at a time from the bag without looking, and record the results on the data form next to "Generation 1." For instance, if you draw one black and one gray bean, place a mark in the chart under "Number of Ff individuals." Continue drawing pairs of beans and recording the results in your chart until all beans have been selected and sorted. Place the "squirrels" into the appropriate dish: FF, Ff, or ff. c) The FF and Ff squirrels are born with shiny black fur. Unlike the Hardy-Weinberg situation above, squirrels with black fur living in a wooded environment stand out against the dull gray/brown background more than their gray-furred relatives (see photo on the first page for an example). This is especially true in the colder months once deciduous trees have dropped their leaves, creating a landscape full of grayish trees and a forest floor covered by brown, dried leaves. The shinny, black-coated squirrels easily stand out in this environment, especially in large forest tracts where red-tailed hawks abound. These keen-eyed raptors spot the conspicuous black squirrels and swoop down upon them often before they can escape. Therefore, the black variants are less likely to reach reproductive age and pass on their genes. Place half the beans from the FF and Ff containers aside before beginning the next round. d) Once half of the beans have been removed from the homozygous dominant and heterozygous beakers, you may now count the remaining F alleles (beans) in each container. Do the same for the f alleles. Total the number of F alleles and f alleles for the first generation and record this number in the column labeled "Total Number of Alleles." Below is a sample of how your results might look:

Generation

Number of FF

Individuals

Number of Ff

Individuals

Number of ff

Individuals

Number of F Alleles

Number of f Alleles

Total Number of

Alleles

Gene Frequency

of F

Gene Frequency

of f 1 xxx

xxxxxx

xxxxxxx

12

20

32

e) Place the alleles of the surviving squirrels (which have grown and reached reproductive age) back into the container and mate them again to get the next generation. f) Repeat steps “a” through “e” to obtain generations two through five. Make sure everyone in your group has a chance to either select the beans or record the results. g) Determine the gene frequency of F and f for each generation and record them in the chart in the columns labeled "Gene Frequency F" and "Gene Frequency f." To find the gene frequency of F, divide the number of F by the total, and to find the gene frequency of f, divide the number of f by the total. Express results in decimal form. The sum of the frequency of F and f should equal one for each generation.

DATA – SCENARIO #2 (NATURAL SELECTION) Generation Number

of FF Individuals

Number of Ff

Individuals

Number of ff

Individuals

Number of F Alleles

Number of f

Alleles

Total Number

of Alleles

Gene Frequency

of F

Gene Frequency

of f 1 2 3 4 5 Scenario #3 – Genetic Drift: a) Unlike the Hardy-Weinberg scenario, your group will start with 40 black and 10 gray beans. The cause of this imbalance is the result of the founder effect. A professor at a college in Ohio studied the black squirrel variety in her laboratory and a few of her graduate students accidentally released twenty black individuals onto the campus, flooding the gene pool with the dominant allele. Put the fifty beans (representing alleles) into the plastic bag and shake it up (represents a mixing of alleles via reproduction between squirrels). b) Without looking at the beans, select two at a time, and record the results on the data form on the following page - next to "Generation 1." For instance, if you draw one black and one gray bean, place a mark in the chart under "Number of Ff individuals." Continue drawing pairs of beans and recording the results in your chart until all beans have been selected and sorted. (Please note that the total number of individuals will be half the total number of beans because each squirrel requires two alleles.) c) For this simulation, count the F and f alleles (beans) that were placed in each of the beakers for "black squirrels" in the first round and record the number in the chart in the columns labeled "Number of F Alleles" and "Number of f Alleles." Repeat this step for the “gray squirrels.” Total the number of F alleles and f alleles for the first generation and record this number in the column labeled "Total Number of Alleles." On the next page is a sample of how your results might look:

Generation Number of

FF Individuals

Number of Ff

Individuals

Number of ff

Individuals

Number of F Alleles

Number of f Alleles

Total Number of

Alleles

Gene Frequency

of F

Gene Frequency

of f 1 xxxxxx

xxx xxxxxxxx xxxxxx

xx

32

18

50

d) Place the alleles of the squirrels (which have grown, survived and reached reproductive age) back into the plastic bag and mate them (shake bag) again to get the next generation. e) Repeat steps “a” through “d” to obtain generations two through five. Try to make sure everyone in your group has a chance to either select the beans or record the results. e) Determine the gene frequency of F and f for each generation and record them in the chart in the columns labeled "Gene Frequency F" and "Gene Frequency f." To find the gene frequency of F, divide the number of F by the total, and to find the gene frequency of f, divide the number of f by the total. Express results in decimal form. The sum of the frequency of F and f should equal one for each generation.

DATA – SCENARIO #3 (GENETIC DRIFT) Generation Number

of FF Individuals

Number of Ff

Individuals

Number of ff

Individuals

Number of F Alleles

Number of f

Alleles

Total Number

of Alleles

Gene Frequency

of F

Gene Frequency

of f 1 2 3 4 5

CLASS DISCUSSION

1) Someone from each group should go the board and make a bar graph of their data in the following manner:

Scenario: _____________ KEY:

= F allele

= f allele

Allele Frequency

1 2 2) How doeevolve, as aHardy-Wein

- La- Raprefe- No- Nonot o- No

3) As you are camouflmeasured thdegrees Cel(by 11%) copopulations

SOURCES This lab has b

Clear Blue SkThe genetics o

Gen.

s the Hard function berg Equ

rge populndom mar an aa fem mutation migrationccur. natural s

have seenaged bettat black scius, alonmpared t

of black

More Fun

een modifiey Productiof these squ

Gen.

y-Weinbof changeilibrium:

ation. Theting. There

ale. . The alle. Exchan

election. N

in this acer than thquirrels hg with a 2o the gray“gray” sq

with Black http://www

h

d from a lans (2001), irrels came

Gen. 3

erg provis in their

populatio is no mat

les must nge of gene

atural sel

tivity, greir black-ave 18%0% lowe variety. uirrels are

“Gray” Squ.roadsideamttp://www.v

b entitled Ba lab origin from: http:

Gen. 4

de a base allele fre

n must be ing prefer

ot change.s between

ection mu

ay squirrecoated re lower her basal m How doe found co

irrel Mutanerica.com

ictoria-park

reeding Bually written//www.woo

Gen. 5

line for identifying how populations quencies? Reconsider the criteria of the

large to minimize random sampling errors. ence. For example an AA male does not

the population and another population must

st not favor any individual.

ls predominate due to the fact that they latives. However, biologists have at loss in temperatures below -10 etabolic rate, and therefore shiver less s this study answer why concentrated mmonly in some northern city parks?

ts (Check out these cooky websites): /set/squirrelsblack.html.com/ksu.htm

nnies, by WGBH Educational Foundation and by Joseph Lapiana (1994). drow.org/teachedrs/bi/1994/find.html