hart protocol introduction

38
HART Protocol Introduction ICP DAS USA, Inc. [email protected] 1-310-517-9888 x105 www.icpdas-usa.com Making Data Acquisition Easy HART Introduction| 6/17/15

Upload: icp-das-usa-inc

Post on 29-Jul-2015

119 views

Category:

Technology


5 download

TRANSCRIPT

HART Protocol Introduction

ICP DAS USA, [email protected] x105www.icpdas-usa.com

Making Data Acquisition Easy

HART Introduction| 6/17/15

HART IntroductionHART (Highway Addressable Remote Transducer) : The HART protocol was developed in the mid-1980s by Rosemount Inc. for use with smart measuring instruments. The registered trademark and all rights in the protocol were transferred to the HART Communication Foundation (HCF). The protocol remains open and free for all to use without royalties.

Features: Communicates at 1200 bps. Support 4-20mA analog signal (primary measured value) and digital signal (device information). Support point-to-point or multi-drop network. (Max. 15 devices) Support 2 wire (Bus Powered) or 4 wire (device ). HART is a master/slave protocol (up to two masters). HART Instrument with intrinsically safe explosion-proof.

Making Data Acquisition Easy

HART Introduction| 6/17/15

Comm. Structure (1/2)Peer-to-Peer mode (analog/digital)

Making Data Acquisition Easy

HART Introduction| 6/17/15

HART Wiring (Peer to Peer)

Making Data Acquisition Easy

HART Introduction| 6/17/15

Comm. Structure (2/2)Multi-drop mode (digital)

Making Data Acquisition Easy

HART Introduction| 6/17/15

HART Wiring (Multi-drop)

Making Data Acquisition Easy

HART Introduction| 6/17/15

Type Model Module Function State

ConverterI-7567 USB to HART Release

I-7570 RS-232/422/485 to HART Release

I-7547 Ethernet to HART Release

HRT-228 HART to AO (4 ch.) 2015/Q4

GatewayHRT-710 Modbus(RTU/ASCII) to HART Release

HRT-711 Modbus/TCP to HART Release

GW-7557 PROFIBUS DP to HART Release

HRT-710-S Modbus(RTU/ASCII) to HART Slave

2016/Q1

HRT-711-S Modbus/TCP to HART Slave 2016/Q1

I/O ModuleI-87H17W HART Analog Input (8 ch.) Release

I-87H24W HART Analog Output (8 ch.) 2016/Q1

ICP DAS HART Products

Making Data Acquisition Easy

HART Introduction| 6/17/15

HART Products

I-7567 (1/3)Features: Support USB1.1 or USB2.0

No external power supply (by USB)

Support point-to-point / multi-drop

Support firmware update via USB

Selectable 250Ω load resistor

Support HART Short/Long frame

Support HART Burst mode

Provide PWR / Tx / Rx LED

Built-in Watchdog

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

I-7567 (2/3)

Application Structure

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

I-7567 (3/3)HC_Tool:

1. Auto scan all HART devices and show the HART device information.

2. Provide HART Universal and Common-Practice command for configuration of HART devices easily.

3. Data logging for HART comm.

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

I-7570 (1/3)Features: Provide RS-232/422/485 Interface

Support point-to-point / multi-drop

Support firmware update via RS-232

Selectable 250Ω load resistor

Support HART Short/Long frame

Support HART Burst mode

Provide PWR / Tx / Rx LED

Built-in Watchdog

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

I-7570 (2/3)

Application Structure

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

I-7570 (3/3)HC_Tool:

1. Auto scan all HART devices and show the HART device information.

2. Provide HART Universal and Common-Practice command for configuration of HART devices easily.

3. Data logging for HART comm.

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

I-7547 (1/3)

Features: Support Ethernet Interface with

VxComm technique.

Support point-to-point / multi-drop

Support firmware update via Ethernet

Selectable 250Ω load resistor

Provide four HART channels

Support HART Short/Long frame

Support HART Burst mode

Provide PWR / TxRx LED

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

I-7547 (2/3)

Application Structure

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

I-7547 (3/3)HC_Tool:

1. Auto scan all HART devices and show the HART device information.

2. Provide HART Universal and Common-Practice command for configuration of HART devices easily.

3. Data logging for HART comm.

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

FDT / DTM Support

Making Data Acquisition Easy

HART Introduction| 6/17/15

HART OPC Server Support

Making Data Acquisition Easy

HART Introduction| 6/17/15

HRT-710 (1/3)Features:Support Modbus RTU/ASCII

Provide RS-232/422/485 Interface

Support point-to-point / multi-drop

Support firmware update via RS-232

Selectable 250Ω load resistor

Support HART Short/Long frame

Support HART Burst mode

Provide PWR / Tx / Rx LED

Built-in Watchdog

Support on-line replacement of HART

devices (FW_v1.5)

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

HART-710 (2/3)

Application Structure

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

HART-710 (3/3)HG_Tool :

1. Auto scan all HART devices and show the device information.

2. Provide module configuration and HART communication easily and quickly.

3. Modbus Address Mapping Table Configuration.

4. Provide the diagnostic info. of HRT-710 and HART device.

5. Provide “Load/Save” module configuration file to apply to other HRT-710 quickly.

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

HRT-710 Application

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

HRT-710 FAQ1. How to integrate HART device information to SCADA or HMI ?

(1) Refer to the ”Q01”, “Q02” and “ Q03” of HRT-710 FAQ.(http://www.icpdas.com/products/Remote_IO/can_bus/faqs.htm#HART)

2. How to update the firmware of HRT-710 ?

(1) Refer to the ”Q04” of HRT-710 FAQ.

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

HRT-711 (1/3)Features:Support Modbus TCP

Provide Ethernet Interface

Support point-to-point / multi-drop

Support firmware update via RS-232

Selectable 250Ω load resistor

Support HART Short/Long frame

Support HART Burst mode

Provide LED indicators

Built-in Watchdog

Support on-line replacement of HART

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

HART-711 (2/3)

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

HART-711 (3/3)

1. Auto scan all HART devices and show the device information.

2. Provide module configuration and HART communication easily and quickly.

3. Modbus Address Mapping Table Configuration.

4. Provide the diagnostic info. of HRT-711 and HART device.

5. Provide “Load/Save” module configuration file to apply to other HRT-711 quickly.

HRT-711 Utility

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

Modbus to HART Software Integration

Making Data Acquisition Easy

HART Introduction| 6/17/15

GW-7557 (1/2)Features: Support PROFIBUS DP-V0

Auto Detect PROFIBUS Baudrate

Support PROFIBUS Max. Baud 12Mbps

Max Output / Input Length 240 Bytes

Provide four HART channels

Support two HART master

Support point-to-point / multi-drop

Support HART Burst mode

Provide PWR / RUN / ERR LED

Built-in Watchdog

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

GW-7557 (2/2)

Application Structure

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

GW-7557 (3/3)PH_Tool :

1. Auto scan all HART devices and show the device information.

2. Provide module configuration and HART communication easily and quickly.

3. Provide PROFIBUS parameter setting info.

4. Provide “Load/Save” module configuration file to apply to other

GW-7557 quickly.

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

I-87H17W (1/2)Features: Support WinPAC / ViewPAC / XPAC and I-87Kn / RU-87Pn / USB-87Pn / ET-87Pn series.

Provide 8 HART channels.

Support current measurement and HART communication.

Support point-to-point only.

Support 2 or 4 wire HART device.

Open wire detection for every ch.

Built-in Dual Watchdog

Support DCON protocol and utility

Provide PWR and Ch. LED

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

I-87H17W (2/2)

Application Structure

Making Data Acquisition Easy

HART Introduction| 6/17/15

Click here to learn more

I-87H24W (1/2)Features: Support WinPAC / ViewPAC / XPAC and I-87Kn / RU-87Pn / USB-87Pn / ET-87Pn series.

Provide 4 HART channels.

Support current output and HART communication.

Support point-to-point only.

Support 2 or 4 wire HART device.

Open wire detection for every ch.

Built-in Dual Watchdog

Support DCON protocol and utility

Provide PWR and Ch. LED

Making Data Acquisition Easy

HART Introduction| 6/17/15

I-87H24W (2/2)

Application Structure

Making Data Acquisition Easy

HART Introduction| 6/17/15

HART I/O Application

Gas Pipeline Pressure Monitor System

Making Data Acquisition Easy

HART Introduction| 6/17/15

ICP DAS HART Application

Making Data Acquisition Easy

HART Introduction| 6/17/15

HART Resource

1. ICP DAS USA HART Products:http://www.icpdas-usa.com/hart_gateways.html

2. HART Official Website: http://www.hartcomm.org/index.html

Making Data Acquisition Easy

HART Introduction| 6/17/15

Questions?

Making Data Acquisition Easy

• Please ask any questions you may have.

• Contact us:Tel: +1 (310) 517-9888 +1 888-971-9888Website: www.icpdas-usa.comEmail: [email protected] Follow ICP DAS USA On:

Earthquake Monitoring System| Maria Lemone | 4/3/15