heap leach development - encuentro metalurgia
TRANSCRIPT
![Page 1: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/1.jpg)
Heap Leach Development
“Achieving the Correct Conceptual Design”
Part I
II International Meeting on Metallurgy
Lima, Perú
November 1-3, 2013
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 2: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/2.jpg)
Heap Leaching is well-proven and an increasingly accepted process
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
• The goal is to ensure its successful
implementation and overall performance
![Page 3: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/3.jpg)
“You can see a lot by just looking.”
….. Yogi Berra
“A heap leach is only as successful as the
conceptual design is correct.”
“It is an inherenlty inefficient process made
efficient with the judicious use of time and
space.”
The result of not paying attention to all the
details is about a 10 % to 30 % under-
performance relative to the projected
production.
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 4: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/4.jpg)
Misconceptions about Heap Leaching
• It is a simple process
• It is a flexible process
• Large bulk samples and pilot plants are
required
• While it is true the bacteria required to
catalyze the oxidation of ferrous iron are
aerobic, it is not necessarily true that one
must use forced aeration.
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 5: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/5.jpg)
So, what is required?
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
• This requires determining the key ore characteristics on representative samples, and
• Conducting well-focused metallurgical testing that defines the key design parameters
A strict discipline applied to
assessing the “leachable” character
of the Resource
![Page 6: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/6.jpg)
“Conceptual Design” Development Strategy The Three-legged Stool Analogy
Resource Evaluation
Hydraulic Characterization
Metallurgical Testing
Representative Sample
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 7: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/7.jpg)
The first leg – Resource Evaluation
Resource Evaluation
Hydraulic Characterization
Metallurgical Testing
Representative Sample
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 8: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/8.jpg)
Resource Evaluation
• It is critical the Owner understand that the development of a heap leach resource is a multi-disciplined endeavor,
– Mining, geology and metallurgy must all work together to achieve the primary goal.
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 9: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/9.jpg)
Resource Evaluation (cont.) • The first order of business is for the geologist and
the metallurgist to understand, – The geology
– The mineralogy,
– The geologic domains, and
– Their interactions
• This can only be accomplished by drilling core
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 10: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/10.jpg)
Principal Steps in Resource Evaluation
• Mapping the geologic domains (key resource parameter); – Lithology, – Mineral zones, and – Alteration
• Determining the “soluble” mineralogy by domain (a key economic parameter)
• Determining the reagent consumption by domain
(an equally key economic parameter) © 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 11: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/11.jpg)
Geologic Domains
• Lithology
• Mineral Zones
• Alteration
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 12: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/12.jpg)
Lithology
rp=rhyolite porphyry; di=diorite; gdp=granodiorite porphyry; bx=breccia; volc=volcanic
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
Diagram from Preece, et al., 1999
![Page 13: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/13.jpg)
Mineral Zones
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
Diagram from Preece, et al., 1999
![Page 14: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/14.jpg)
Alteration
Qtz-ser=quartz sericite; sil=siliceous; arg=argillic; K=potasic; chl-ser=chlorite sericite; prop=propyllitic
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
Diagram from Preece, et al., 1999
![Page 15: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/15.jpg)
Implications of Alteration
Scheffel (2003)
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 16: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/16.jpg)
Soluble Mineral Content
• A key economic rock model input
• There are two options;
– Classical mineralogy
– Diagnostic Assays
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 17: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/17.jpg)
Classical Mineralogy
• Optical Microscopy – polarizing and stereo
• XRD – both qualitative and quantitative • SEM/EDS - good for textures and phases but mostly
semi-quantitative • Automated Mineralogy
– QemScan – MLA – Tescan TIMA
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 18: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/18.jpg)
Diagnostic Assays
• Acid Soluble – ASCu
• Cyanide Soluble – CNCu
• Ferric Soluble – FSCu
• “Sequential” – ASCu + CNCu + CuT(residue)
• “Partial Leach” – FSCu, CNCu, CuT
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 19: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/19.jpg)
Cautions
• One must always start with known mineralogy
• Then match any “diagnostic” assay (or combination of assays) to the specific resource
• Then the Owner must investigate and understand the exact procedure used by the laboratory
• These methods must be considered semi-quantitative, but can become nearly quantitative if strict procedures are applied
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 20: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/20.jpg)
Reagent Consumption
• A key economic rock model input
• Driven primarily by gangue mineralogy
• Need to develop an understanding of approximate reagent consumption very early in the resource evaluation
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 21: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/21.jpg)
Host Rock Acid Consuming Character
Dreier (2013)
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 22: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/22.jpg)
Empirical Acid Consumption Tests
• Iso-pH Test
• Acid Cure/Agglomeration Tests © 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 23: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/23.jpg)
The second leg - Hydraulic Characterization
Resource Evaluation
Hydraulic Characterization
Metallurgical Testing
Representative Sample
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 24: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/24.jpg)
Hydraulic Characterization
• The vital “third” leg to the three-legged Stool
• The most significant development in heap leaching the last 12 years
• The most “critical” item to define prior to conducting column testing
• Not understanding the hydraulic character of the ore is a primary reason for heap leach failure
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 25: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/25.jpg)
Key Hydraulic Parameters
• Particle Size Distribution
– Physical size of particles
– Distribution of metal value by size fraction
• Dry Bulk Density
– And how it varies with load
• Moisture retention
– its role in achieving optimum agglomerate quality
– its impact on heap solution and metal inventory
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 26: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/26.jpg)
Required Test Procedures
• Stacking Test™
• Hydrodynamic Column Test™
TM – trade mark of HydroGeoSense Guzman (2013)
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 27: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/27.jpg)
Stacking Test
• The minimum preliminary testing which proves whether the ore is a likely candidate for heap leaching, and
• Indicates the approximate conditions of ore depth and moisture attenuation requirements
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 28: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/28.jpg)
Minimum Requirements
• A porosity of the ore bed of > 30%
• For a single-lift leach a saturated hydraulic conductivity of 100 times the design application rate
• For a multiple-lift leach a saturated hydraulic conductivity of 1000 times the design application rate
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 29: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/29.jpg)
Hydrodynamic Column Test
• The HCT determines the sample’s key hydraulic parameters; – Hydraulic conductivity curve
– Air conductivity curve
– Solution content (% saturation)
– Pore pressure
– The drain down curve
– The micro- and macro-porosity (which ideally should be a 50/50 distribution)
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 30: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/30.jpg)
The Goal – Optimum Agglomeration Fully Agglomerated (Level 5) Partially Agglomerated (Level 2)
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 31: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/31.jpg)
The Result Effect of Agglomeration Quality on Application Rate
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 32: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/32.jpg)
The Result Effect of Agglomeration Quality on Air Conductivity Rate
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 33: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/33.jpg)
The third leg - Metallurgical Testing
Resource Evaluation
Hydraulic Characterization
Metallurgical Testing
Representative Sample
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 34: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/34.jpg)
Metallurgical Testing
• Volume is not superior to quality of testing and the representativeness of the sample
• Therefore, focused testing on core can be a better approach
• It is critical to understand that no individual column test (or series of tests) can definitively provide the key design parameters
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 35: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/35.jpg)
Metallurgical Testing (cont.)
• Sample Preparation is critical
• For “comparative” type column tests the PSD and ore grade must be nearly identical
• Also, the hydrodynamic character of the ore is affected by the PSD, especially the “fines” content, i.e. -75 micron.
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 36: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/36.jpg)
Personal Opinions on Met Testing
• If the preliminary Resource Evaluation supports heap leaching, then
• One can use the hydrodynamic testing, diagnostic assaying and acid consumption data developed on core intervals and go directly to “full-depth” column testing
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 37: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/37.jpg)
Personal Opinions on Met Testing • With this approach to development, there is little
utility in cost, time or knowledge gained in conducting; – Bottle roll tests
– Short column tests
– Pilot heaps
• The development of diagnostic assays, empirical acid consumption testing and the hydraulic characterization, combined with experience, can greatly reduce the historical approach to the typical heap leach development testing program
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 38: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/38.jpg)
Variability Testing
• What variable are you testing?
• Are the “variable” conditions you are testing valid? And finally,
• Will it accomplish the primary goal of reducing risk?
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 39: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/39.jpg)
What are the key Operational Variables?
• Ore Grade – affects recovery due to
inadequate leach cycle time
• Mineralogy – affects recovery and leach cycle
time
• Acid Consumption – affects cost,
degradation and leach cycle time
• Alteration – affects recovery
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 40: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/40.jpg)
Operational Variables (cont.)
• Moisture – affects agglomeration quality and
leach cycle time
• Particle Size Distribution – affects
hydraulic wetting behavior and recovery
• Operating Conditions – solution application,
pressure distribution, head differential, climatic
temperature conditions – all affecting leach cycle
time.
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 41: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/41.jpg)
In Summary • The Proposed Development Strategy
– To achieve the best overall picture of the Resource
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 42: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/42.jpg)
Proposed Development Strategy
• Drill resource with HQ Core on 2 m interval
• Photo, log, and archive select section of core
• Prepare all remaining 2 m core interval to P80 25mm
• Conduct “diagnostic” assays on each interval
• Conduct “empirical” acid consumption Iso-pH test on selected rock type intervals
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 43: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/43.jpg)
Development Strategy (cont.)
• Conduct selective QXRD and Normative mineralogy to identify the alteration style
• Wait till all the above data is complete, compiled and tabulated
• Then select appropriate different rock types for hydraulic characterization
• Do not organize metallurgical testing program until the hydraulic characterization is complete
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 44: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/44.jpg)
Development Strategy (cont.)
• Then design the tall column test program consistent with the dry-bulk density, depth, and acid pre-treatment established by the previous work
• The geologic rock modeling can then be completed which can be defended and support a pre-feasibility or even a “bankable” feasibility study
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
![Page 45: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/45.jpg)
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
Diagram from Preece, et al., 1999
Diagram from Preece, et al., 1999
Diagram from Preece, et al., 1999
Resource Evaluation
Hydraulic Characterization
Metallurgical Testing
Representative Sample
![Page 46: Heap Leach Development - Encuentro Metalurgia](https://reader030.vdocument.in/reader030/viewer/2022012620/61a0f6f54f4f8837bb7daf0f/html5/thumbnails/46.jpg)
© 2013 Randolph E. Scheffel – All Rights Reserved
II International Meeting on Metallurgy, Peru, Nov 2013
Thank you!