heat exchanger header plugs · 2020. 12. 14. · ad 2000 merkblatt w2/w7/w10 * api * norsok sa 105...
TRANSCRIPT
All plugs produced by WTE PowerBolt are strictly from European materials. Our products are marked WTE + material + heat number. Additional proprietary markings can also be added upon request. Plugs are supplied with inspection certificates: EN 10204-3.1 or 3.2 as needed. All materials held in-stock at WTE have complete traceability.
ISO 9001:2016 * PED 2014/68EU * PED 97/23 * AD 2000 Merkblatt W2/W7/W10 * API * NORSOK
SA 105
SA 350LF2
SA 193 B7/L7
SS 304L, 316L, 310, 321
DUPLEX, SUPER DUPLEX
MONEL 400, K500
INCONEL 625, 825, 925
ALLOY 904L
EMERGENCY DELIVERY WITHIN 24 TO 48 HOURS FROM OUR LARGE STOCK OR OUR FAST TURNAROUND PRODUCTION.
SPECIAL FASTENERS MANUFACTURINGISO 9001 | ISO 14001 | ISO 18001
PED 2014/68 EU | AD 2000 Merkblatt W0
HEAT EXCHANGERHEADER PLUGS
Hot forgedCold machinedRolled threadMachined thread100% traceabilityFine machiningSand blasted headMade in WTE PowerBoltMade in Europe
powerbolt.eu/heatexchangers [email protected]
Made in WTE PowerBolt
EUROPEAN FACTORY
Dia Material
1.1/8“-12UNF
1.3/8“-12UNF
1.1/2“-12UNF
1.5/8“-12UNF
SA 105SA 350LF2
SA 105SA 350LF2
SA 105SA 350LF2
SA 105SA 350LF2
Stock Length (mm)
in stock
in stock
in stock
in stock
20 25 30 35 40 45 50
Forged plug blanks in stock
20 25 30 35 40 45 50
20 25 30 35 40 45 50
20 25 30 35 40 45 50
Michael DiTrapaniBusiness Development Manager
+420 777 759 954
powerbolt.eu/heatexchangers
powerbolt.eu [email protected]
WTE PowerBolt s.r.o.Sportovni 1400
282 01 Cesky BrodCzech Republic, Europe
HEAT EXCHANGER HEADER PLUGS