heat water electricity - termotehnika€¦ · design-flat plate collector skr500 • unique flat...

HEAT WATER ELECTRICITYPRODUCTS AND PRICES

2020

HEAT | WATER | ELECTRICITY

Say yes to renewable!

All prices in Euro excl. VAT, valid until further notice. Subject to typographical and printing errors as well as technical changes and price changes.Discount group: Heating Electricity

PLUG & FLOW SOLAR COLLECTORS PFMDesigned for in-roof and on-roof mounting in 3 different sizes with patented connection system, easy to install.

8

SONNENTANK The most intelligent solar tank on the market: efficient, cost effective and sustainable.

SONNENKRAFTWERKThe new plug & play Photovoltaic Module enables easy installation without additional mounting and connection material.

14

12ELECTRICITYProduction and storage of solar electricity

HEATProduction and storage of solar heat

WATERProduction of domestic hot water

2


3Solar hot water system

COMPACT

• Covers up to 70% of hot water requirements• Universal hot water storage tank with 300 to 500 l tank capacity• Maximum hot water comfort thanks to rapid heating through a large internal register

300 L 400 L 500 LPersons Pers. 2 - 4 3 - 6 5 - 7

Number of collectors Pcs. 2 3 3

Total collector area (rounded) m2 5 7,5 7,5

SKR500 Set € 3.311,- 4.152,- 4.319,-without mounting material, incl. connection set

Matchcode COMP302SKR COMP403SKR COMP503SKR

Art. N° 3448 3451 3617

PFM Set € 3.129,- 3.871,- 4.038,-without mounting material, incl. connection set DN 16

Matchcode COMP302PFMS COMP403PFMS COMP503PFMS

Art. N° 3708 3710 3735

Set components

COMPACT storage tank Type DHW300PR2 DHW400PR2 DHW500PR2

Solar pump group and flow valve with gravity brake Type RLGHE RLGHE RLGHE

2-circuit control unit, including 3 sensors Type STRGO STRGO STRGO

Service water mixer Type TBM20 TBM20 TBM20

Expansion tank incl. AGVS with cap valve Type AG25 AG25 -

Expansion tank with baseincl. cap valve KVAG50

Type - - AG35

Antifreeze l 10 10 20

Corrugated pipe connection set insulated stainless steel double corrugated hose, DN16, 15 m length, incl. metallically sealed connector fittings for solar pump group and collector

for SKR500 € 394,- 394,- 394,-Matchcode EWRS16SKR/RLG EWRS16SKR/RLG EWRS16SKR/RLG

Art. N° 3500 3500 3500

for PFM € 364,- 364,- 364,-Matchcode EWRS16PFM/RLG EWRS16PFM/RLG EWRS16PFM/RLG

Art. N° 3782 3782 3782

optional accessoriesMeasuring section with Grundfos sensor STRGVM (1450) for heat quantity calculation - page 13

Hot water tank DHW

Colle

ctor

Solar pumping station

Hot water

Hot water tank

Cold water

Backup heating

Functional diagram COMPACT


4

• Optimum solar yield with perfect stratification due to stratified charging of SONNENTANK system storage• Fresh and hygienic hot water thanks to fresh water module FRESH HYDRO• Surplus solar electricity is stored in SONNENTANK as heat

Solar heating system

COMFORT PLUS HEATING

500 L 800 L 1000 L 1500 LPersons Pers. 2 - 5 3 - 5 4 - 6 6 - 8

Number of collectors Pcs. 4 5 6 8

Total collector area (rounded) m2 10 12,5 15 20

SKR500 Set € 6.538,- 7.524,- 8.334,- 10.272,-without mounting material, incl. connection set

Matchcode SOT504SKR SOT805SKR SOT1006SKR SOT1508SKR

Art. N° 2512 2513 2514 2515

PFM Set € 6.166,- 7.053,- 7.764,- 9.504,-without mounting material, incl. connection set DN 16

Matchcode SOT504PFM SOT805PFM SOT1006PFM SOT1508PFM

Art. N° 2516 2517 2518 2519

Set componentsSONNENTANK System storage Type SOTF500 SOTF800 SOTF1000 SOTF1500

Fresh water module Type FWS40HYDROST FWS40HYDROST FWS40HYDROST FWS40HYDROST

Solar charging module Type BL25ST BL25ST BL25ST BL25ST

2-circuit control unit, including 3 sensors Type STRGO STRGO STRGO STRGO

Expansion tank incl. cap valve KVAG50/KVAG80 Type AG35 AG50 AG50 AG80

Antifreeze l 20 20 25 30

Corrugated pipe connection set insulated stainless steel double corrugated hose, DN16 or DN20, 15 m length, incl. metallically sealed connector fittings for solar pump group and collector

for SKR500 € 449,- 449,- 449,- 449,-Matchcode EWRS20SKR/SST EWRS20SKR/SST EWRS20SKR/SST EWRS20SKR/SST

Art. N° 3504 3504 3504 3504

for PFM € 419,- 419,- 419,- 419,-Matchcode EWRS20PFM/SST EWRS20PFM/SST EWRS20PFM/SST EWRS20PFM/SST

Art. N° 3779 3779 3779 3779

optional accessoriesSystem optimizer SOBOOSO (2531) - S. 15 SONNENBOOSTER SOBOO52 (2521) - S. 15

Functional diagram COMFORT Plus HEATING

SONNENTANK System storage

Fresh water module

Hot w

ater

Cold

wat

er

Heating return

Backup heating

Colle

ctor

Solar charging module


SONNEN- BOOSTER

5,2 kW

NEW

NEW


5NEW

Heating return

SONNENTANK thermical storage with screw-in electricla heting element SONNEN-BOOSTER 5,2kW

SONNENKRAFTWERK

Plug-In solar power system

COMFORT PLUS ELECTRICITY

Functional diagram COMFORT PLUS electricity

built in micro-inwerter

Smartmeter

Switch board

Hot water


Solar

powe

r mod

ules

Power grid

Household

Fresh water module

SONNENBOOSTER

E-Mobility

• Optimal combination of Solar electricity and SONNENTANK thermical storage system• Surplus solar electricity is stored as heat and supports heating system• System solution with perfect design and storage stratification developed by SONNENKRAFT engineers.

Solar electricity set 0,65 kWp 1,95 kWp 4,55 kWprecommended for annual electricity consumption kWh/a 1000 1800 6000Number photovoltaic modules Pcs. 2 6 14Total module area (rounded) m2 4 10 24

SONNENKRAFTWERK Set € 908,- 2.230,- 4.950,-325 Wp mono black, micro inverter, without mounting material

Matchcode SKW02 SKW06 SKW14Art. N° 2522 3870 3874

Set componentsConnection piece incl. RST20 plug VKSET1SRST - -connection piece/End piece Type SKWAS / SKWES SKWAS / SKWES SKWAS / SKWESConfiguration interface for country specification Type SKWDO SKWDO SKWDOFronius Symo inverter with web access Type - - -Connector and socket Type - - -100 m DC-cable, 6 mm2 Type - - -

optional Wall mounting set SKW/BEF (2412) and Floor standing set SKW/BA (2413) - page 12

fitting SONNENTANK System storage € - 3.520,- 3.820,-Matchcode - SOTF500 SOTF800

Art. N° - 2486 2487

Fresh water module Matchcode - FWS40HYDROST FWS40HYDROSTArt. N° - 2536 2536

SONNENBOOSTER Matchcode SOBOO52 SOBOO52 SOBOO52Art. N° 2521 2521 2521

Systemoptimizer Matchcode SOBOOS0 SOBOOS0 SOBOOS0Art. N° 2531 2531 2531

NEW

DESIGN-FLAT PLATE COLLECTOR

SKR500• Unique flat plate collector with frameless glass design• High-performance with 82% efficiency• Simple and quick installation - plug & flow

SKR500

Connection (diagonal) max. 12 pcs. (portrait) or 10 pcs. (landscape) in series

1

1 10

12

Flow

Flow

Return

Return

STEP 1�Select design-collector (type, number) Traycollector with 2,5 m2 gross area (aperture 2,26 m2 / absorber 2,30 m2), possible collector inclination 15 - 75 °,4x fast connections

SKR500E portrait format (H x W x D) - 2079 x 1240 x 95 mm, max. 12 pcs. in series Solar Keymark Reg. Nr.: 011-7S 1277F

111 198 630,-

SKR500LE landscape format (H x W x D) - 1240 x 2079 x 95 mm, max. 10 pcs. in series Solar Keymark Reg. Nr.: 011-7S 1284F

111 199 630,-

STEP 2� Select connection accessories / hydraulics sets Orderexample with 6 collectors: 1 x GSSKR + 5 x ESSKRBasic set for the first collector (per field): 2 end plugs for closing unused SKR collector connections and 2 pcs. flat sealing system connections 1" mExtension set for each additional collector: 2 hydraulic quick connectors between 2 SKR collectors

GSSKR Basic set for first collector of each collector field 110 431 78,-

ESSKR Expansion set for each additional collector 110 050 24,-

SKRWA 1 x 90 ° angle Rp 1 "external thread, flat gasket for system connection, plug-in coupling, when installing 2 collector fields

110 095 29,-

AV150F Corrugated hose connection DN20, insulated, 100 cm long. 1" fem/male 2541 39,-

SKR500L


6

STEP 4� Select rail system set (incl. mounting rails - connectors & elevation triangles for tilted mounting)

parallel 0° tilted 35 - 50°Roof connection set

(step 3)

Number ofcollectors

Matchcode Art. N° Price Matchcode Art. N° PriceNumber of mountingsupports with rafter

spacing 80 cm

HIGHLOAD Additional number

of mountingsupports for high

snow loads* PORTRAIT FORMAT

1 SKR0K1 3702 121,- SKR50K1 3704 159,- 2

2 SKR0K2 3400 154,- SKR50K2 3418 192,- 2 +2

3 SKR0K3 3401 243,- SKR50K3 3419 300,- 3 +2

4 SKR0K4 3402 314,- SKR50K4 3420 390,- 4 +3

5 SKR0K5 3403 403,- SKR50K5 3421 498,- 5 +3

6 SKR0K6 3404 474,- SKR50K6 3422 588,- 6 +4

7 SKR0K7 3405 599,- SKR50K7 3423 751,- 8 +4

8 SKR0K8 3406 634,- SKR50K8 3424 786,- 8 +5

9 SKR0K9 3407 759,- SKR50K9 3425 949,- 10 +5

10 SKR0K10 3408 794,- SKR50K10 3426 984,- 10 +6

11 SKR0K11 3883 919,- SKR50K11 3887 1.147,- 12 +6

12 SKR0K12 3884 954,- SKR50K12 3888 1.182,- 12 +8

add. mountingsupports

SKRAWN 110 350 36,- SKRA35K50 110 354 55,-

LANDSCAPE FORMAT

1 SKRL0K1 3705 134,- SKRL50K1 3707 176,- 2 +1

2 SKRL0K2 3427 271,- SKRL50K2 3441 355,- 4 +2

3 SKRL0K3 3428 377,- SKRL50K3 3442 482,- 5 +3

4 SKRL0K4 3429 514,- SKRL50K4 3443 661,- 7 +4

5 SKRL0K5 3430 620,- SKRL50K5 3444 788,- 8 +6

6 SKRL0K6 3431 757,- SKRL50K6 3445 967,- 10 +6

7 SKRL0K7 3432 894,- SKRL50K7 3446 1.146,- 12 +7

8 SKRL0K8 3433 1.031,- SKRL50K8 3447 1.325,- 14 +8

9 SKRL0K9 3889 1.137,- SKRL50K9 3893 1.452,- 15 +9

10 SKRL0K10 3890 1.274,- SKRL50K10 3894 1.631,- 17 +10


SKRAWL 110 351 31,- SKRLA35K50 110 355 52,-

STEP 3� Select roof connection set (number of required mounting levels see step 4)Set

(2 pcs. incl. accessories)Roof bracket Hanger bolt

(incl. HB elbow connection WIBA)Hanger bolt

(incl. WIBA)

Inclination 0° 0° 20° - 50°

Price/Set 42,- 23,- 29,-

Matchcode DBPN/L SSPN/L SSA20/35/50NL

Art. N° 112 827 112 997 112 998

Roof type Tiles (Well) Eternit (Well) Eternit

Recommendation: when installing roof brackets we recommend the use of sheet metal tiles.


7

20° online at

your regional

distributor

PFM• Meander absorber• Simple and fast installation (plug & flow) - in-/on-roof• Patented connection technology

PLUG & FLOW MODULE COLLECTOR

STEP 1� Select PFM module collector (type, number) possible collector inclination 15 - 70 °, 4 fast connectors PFMS2000 Portrait format (H x W x D) - 1700 x 1180 x 62 mm, max. 10 Pcs. in Serie

2,01 m2 gross area (1,89 m2 aperture area), Solar Keymark: 011-7S 2393F1430683 460,-

PFMS2500 Portrait format (H x W x D) - 2160 x 1180 x 62 mm, max. 10 Pcs. in Serie2,55 m2 gross area (2,41 m2 aperture area), Solar Keymark: 011-7S 2395F

1430685 520,-

PFMW2500 Landscape format (H x W x D) - 1180 x 2160 x 62 mm, max. 6 Pcs. in Serie2,55 m2 gross area (2,41 m2 aperture area), Solar Keymark: 011-7S 2396F

1430686 520,-

STEP 2� Select hydraulic connection accessories ON-ROOF Order example with 6 collectors (corrugeated pipe DN20): 1 x GSPFMWR20 + 5 x ESPFMBasic set: 2 pcs. end plugs for closing unoccupied PFM connections and 1 pc. angle connection with immersion sleeve and 1 pc. angle connection, 2 pcs. safety hooks, 4 pcs. mounting holders, 4pcs. rail endcap, 1pcs. Mounting instructions Expansion set: 2 Pcs. hydraulic quick connectors between 2 PFM collectors, 2 pcs. safety hooks

GSPFMC22 1x Basic set for copper Cu22 for first collector of each collector field

2579 106,-

GSPFMWR16 1x Basic set for corrugated pipe DN16 for first collector of each collector field

2580 105,-

GSPFMWR20 1x Basic set for corrugated pipe DN20 for first collector of each collector field

2581 113,-

ESPFM 1x expansion set for each additional collector 2582 35,-

landscape format

portrait format

. . .

. . .

Serial connection (diagonally) max. 10pcs (portrait format) or max. 6 pcs. (landscape format)

Flow

Flow

Return

Return

1

1

10

6

incl.

safety

hooks

and mo

unting

holde

rs


8

STEP 4� Select rail system set (incl. rail system, connectors, elevation triangles for tilted mounting)

parallel 0° tilted 20°-45° Roof connection set

(step 3)

Number of collectors Matchcode Art. N° Price Matchcode Art. N° PriceNumber of mounting

supports with rafter

spacing 80 cm

HIGHLOAD Additional number

of mountingsupports for high

snow loads* PORTRAIT FORMAT PFM

1 AFPFM2S0KSL1 2545 31,- AFPFM2S20KSL1 2561 240,- 2

2 AFPFM2S0KSL2 2546 60,- AFPFM2S20KSL2 2562 269,- 2 +2






8 AFPFM2S0KSL8 2552 285,- AFPFM2S20KSL8 2568 1.016,- 8 +5




- - - AFSD45 40325 87,-

LANDSCAPE FORMAT PFM (only 2,5 m2)

1 AFPFM2W0KSL1 2555 54,- AFPFM2W20KSL1 2571 231,- 2 +1





6 AFPFM2W0KSL6 2560 354,- AFPFM2W20KSL6 2576 1.099,- 10 +7


- - - AFSD45Q 40326 71,-

STEP 3� Select roof connection set (number of required mounting levels see STEP 4)Set

(2 pcs. incl. accessories)Hanger bolt

(incl.WIBA)Roof bracket

(inkl. WIBA and bolts)Rafter anchor

(incl. WIBAand bolts)

Seam clamp (incl. WIBAand bolts)

Inclination 0° - 60° 0° - 45° 0° 0° 0° - 45° 0°

Prices/Set 25,- 54,- 46,- 39,- 92,- 46,-

Matchcode AFSSS2 AFDHHVS2 AFDHBS2 AFDHSS2 SASPFM2 AFBFKS2

Art. N° 2523 2524 2525 2526 2527 2528

Roof type (Well) Eternit Tiles Beaver tail Slate Tiles Panel fold

Recommendation: when installing roof brackets or rafter anchors we recommend the use of sheet metal tiles.


9

preassembled

50°/60°

online at your

regional dis-

tributor

PFM - IN-ROOF• simple, fast, in-roof Mounting - plug & flow• service opening for sensor replacement• applicable for all roof arts

PLUG & FLOW MODULE COLLECTOR

Metal sheet distances at tile roof, plain tile, beawer-tail roofing, at roof inclination 18°-70°

Size of a collector field (height and bright of metal coverage in cm.

1

47 471

546 25

328

metal sheets

2323 121

242363

484605

724

2 3 4 5 6

770

STEP 1� Select PFM module collector (number) possible collector inclination 15 - 70 °, 4 fast connectors PFMS2500 Portrait format (H x W x D) - 2160 x 1180 x 62 mm, max. 10 Pcs. in Serie

2,55 m2 gross area (2,41 m2 aperture area), Solar Keymark: 011-7S 2395F1430685 520,-

STEP 2� Hydrauli connections IN-ROOFEWRS20PFM Connection-Set PFM for corrugated pipe DN20: 3m double corrugated pipe, basic

connection set for corrugated pipe (HGW20) collector sensor, overvoltage protection box 3847 227,-

STEP 3� Fixing set IN-ROOF mounting Order example: 12 collectors (6 pcs. in a row) 1st row: 1 x GSIN1PFMS25 + 4 x ESIN1PFMS25 and 2nd row: 1 x GSIN2PFMS25 + 4 x ESIN2PFMS25Basic set for both first solar collectors (edge): complete metal cover sheet ( front, back and side parts), required mounting materials, (holders, connection strips, screws, roof battens), wooden wedges, seals, hydraulical extention set ESPFM.Extension set for each following solar collector: middle metal sheet, required mounting material, wooden wedges, sealing, cover strips, hydraulical extention set ESPFM

1. Reihe PFMINGS1R Basic set for 2 collectors at single row application 2460 698,-

1. Reihe PFMINES1R Extension set for 1 collector for single row application 2461 297,-

2. Reihe 1. Reihe

PFMINGS2R Basic set for 2 collectors at multiple row application 2462 523,-

2. Reihe 1. Reihe

PFMINES1R Extension set for 1 collector for multiple row application 2463 215,-

incl.

Extens

ion set

HE/ESP

FM


10

MOUNTING ACCESSORIES SKR, PFM & KIOTO POWER / ALPIN

Roof connection set (at high snow loads additional sheets for roof connections are required)

SAS 2 pcs. rafter anchor sets for tiles, height adjustable 40 - 60 mm (excl. WIBA) 4279 77,-

AFBFK 1 pc. Panel fold (excl. WIBA) 40319 16,-

Angle connection set (WIBA)

WIBA0SKR 2 pcs. WIBA-angle 0 ° for the connection - roof connection/rail system, SKR500 112 825 21,-

WIBA20/35/50 2 pcs. WIBA-angle 20° or 35°-50°, for connection - roof connection/support triangle system, SKR500 1773 20,-

AFWIBAS 2 pcs. AluFix WIBA mounting support set, PFM and Photovoltaic modules 4261 15,-

Hanger bolts accessories

FIP 2 pcs. FIXPLAN for hanger bolts 0 ° -50 °, suitable for Kalzip and metal rebate 3262 29,-

BP 2 pcs. BITUPLAN for hanger bolts 0°-50°, suitable for bitumen roofs 3263 7,-

ZBWE6* 1 pc. additional plate for Corrugated Eternit P6 (6 waves/m) 1392 7,-

ZBWE9* 1 pc. additional plate for Corrugated Eternit P9 (9 waves/m) 1732 7,-

Optional metal sheet

EBER* 1 pc. Eternite rhombus, 470 x 600 mm 1096 21,-

EBED* 1 pc. Eternite double, 400 x 300 mm 1097 21,-

EBBS* 1 pc. insert plate for beaver-tail 1098 18,-

Roof penetration

DD 1 pc. EPDM roof duct for ø 6-70 mm with roof mounting flange 1184 31,-

AS 1 pc. sealing collar, 42 - 55 mm, for roof penetration (EWRID) 1491 16,-

Concrete ballast for a professional installation of support triangles, 1 x BBM and BBS per concrete ballast, static calculation required on site, prices excl. freight charges

BBFD170* Concrete ballast; 170 kg, 1800 x 200 x 200 mm; pallet 4 pcs. each 2181 113,-

BBFD285* Concrete ballast; 285 kg, 2400 x 200 x 250 mm; pallet 3 pcs. each 111 851 209,-

BBM* Building protection mat; 2500 x 300 x 6 mm 1719 12,-

BBS Bolt set M12 for support connection 1720 9,-

*delivery time > 3 weeksAll prices in Euro excl. VAT, valid until further notice. Subject to typographical and printing errors as well as technical changes and price changes.Discount group: Heating Electricity

11

STEP 1� SONNENKRAFTWERK Photovoltaic-module with integrated micro inverter - for a simple die simple integration of the AC cable into the control cabinetSKW325 325 Wp mono perc black, SONNENKRAFTWERK, with integrated inverter with basic setting

"Austria", ALPINE frame and 4mm DEFLECT glass, higher snow loads (up to 8000Pa depends on mounting application), Portrait format (H x W x D) - 1680 x 1002 x 40 mm

15344001 340,-

STEP 2� Select connection set for 1-2 SONNENKRAFTWERK ModulesVKSET1SKW 3 m cable incl. Safety plug, IP 68 plug for 1 or 2 Modules incl. SKWES 2534 48,-

VKSET1SRST 3 m cable incl. RST20, IP 68 plug for 1 or 2 Modules incl. SKWES 2535 58,-

Accessories for Up to 14 SONNENRKAFTWERK modules in series as plug-in system

SKWAS Connection piece (IP68), 1x per string (max 14 modules in serial connection) 2400 15,-

SKWES End piece, 1x per string (max 14 modules in serial connection) 2401 5,-

STEP 3� select SONNENKRAFTWERK mounting systemSKWBEF Wall mounting set incl. backrails for 1 Module 2412 75,-

SKWBA Floor standing set for landscape format mounting only incl. backrails for 1 Module 2413 85,-

Accessories SONNENKRAFTWERK

SKWDO Monitoring-Tool for configuration of inverter while commissioning (country setup)1 pc. per system

2402 170,-

• Up to 14 modules in series as plug-in system• Wall- or roof mounting, as well as floor standing is possible• Higher solar yield: each Module works as separate power plant due to built in micro-inverter

PLUG-IN SOLAR POWER MODULE

SONNENKRAFTWERKSKW


R11-01 ready� Due to integrated ENS interface, the Modules shut down as soon as there is no active network. In case of fire and disconnection of home network there is no power on the Modules.

Connection example� End piece SKWESConnection piece SKWAS

max. 14 SONNENKRAFTWERK Modules per phase Functional video�

Micro-inverter certificates: DIN V VDE V 01261-1 | DIN V VDE V 0126-1-1/A1 VDE-ARN4105:2012-08 | DIN VDEV0124-100 EN G2109-1:2010 | EN62109-2:2011 EN6100-6 | EN50438:2013

TÜV

DIN EN 60335 Household normativ

es

12

NEW

• Pre-fitted solar station with pre-programmed control unit • expansion vessel mounted on the tank• unique & compact design

Presetted STRGO solar control is a perfect solution for all SONNENRKAFT solar systems. Graphi-cal display enables easy handling and 11 presetted schematics with all important parameters are perfect fit for professional use. Posible is also heat metering.

HOT WATER TANK

COMPACT

SOLAR CONTROL UNIT

Bottomheat. area,solar (m2)

Diameterwithout/with

insulation(mm)

Heightinsulated

(mm)

tiltedheight

(mm)

COMPACT hot water tank incl. pre-programmed pump unit RLGHE / STRGO incl. insulation

DHW300PR2 300 litres hot water tank with 2 registers 1,41 600 1794 1876 121 229 1.672,-



Expansion vessle and corrugated pipes on page 18

RLGHE/VAS/KFE Flow fitting with non-return valve, incl. connection for flushing and filling

130 591 42,-

Solar pumping station 1-line for tank mounting DHWPR2 and wall mounting

RLGHE Solar station incl. 2-circuit solar controller STRGO & 3 PT1000 sensors (for tank mountingDHWPR2) tank connection: G3/4" fem., solar piping connection: Compression fitting ø 22 mm

131 337 590,-

Solar pumping station 2-lines for tank and wall mounting, up to 25 m2

SSTX25/2E Solar station excl. 2-circuit solar controller OMEGAtank connection: G1“ male, solar piping connection: G3/4" fem.

1853 480,-

SST25/2E Solar station incl. 2-circuit solar controller OMEGA & 3 PT1000 sensorstank connection: G1“ male, solar piping connection: G3/4" fem.

1731 680,-

SST25VME SST25/2E incl. measureing section STRGVMtank connection: G1“ male, solar piping connection: G3/4" fem.

3086 781,-

DHW

Solar and heating control OMEGA

STRGO STRG C Omega 2-circuit control unit, incl. heat quantity metering, 3 sensors (11 schemes) 1458 171,-

Accessories for heat quantity metering

STRGVM Volume gauge: sensor incl. fitting, Insert- and connection cable, 3/4" male, Length 110 mm 1450 101,-

Accessories

STRGKF Temperature sensor for collectors with PT1000 characteristics 1189 17,-

STRGSF Temperature sensor for storage tanks with PT1000 characteristics 1487 14,-

STRGSP10 Overvoltage protection for collector sensors 1527 19,-

Pre-mounted

solar station

on the tank


13

• Fresh water module FWS40HYDROST, solar charging modules BL25ST preassembled and directly mounted on tank

• fast heating due to SONNENBOOSTER• special design for heat pump applications

SONNENTANK SYSTEM STORAGE

COMFORT PLUS

STEP 1� SELECT SONNENTANK System storage incl. insulationDiameter

without/withinsulation

(mm)

Heightinsulated

(mm)

tiltedheight

(mm)

SOTF500 500 litres SONNENTANK system storage 700 / 900 1705 1660 2486 890,-

SOTF800 800 litres SONNENTANK system storage 790 / 990 1805 1775 2487 1.190,-

SOTF1000 1000 litres SONNENTANK system storage 790 / 990 2205 2180 2488 1.290,-

SOTF1500 1500L SONNENTANK DUO storage tank (2 FWS40HYDROST mountable on tank)

1000 / 1200 2130 2150 2489 1.450,-

ISOTF1500 Insulation for 1500L SONNENTANK storage tank 2533 470,-

Extention tank incl. Insulation

SOTB800 800 litres SONNENTANK extention tank 790 / 990 1805 1775 2509 850,-

SOTB1000 1000 litres SONNENTANK extention tank 790 / 990 2205 2180 2510 930,-

PVS40 Buffer tank connection hose 260 mm, 2x 1 1/2" (advised 4 connections) 1075 47,-

STEP 2� fresh water station for SONNENTANK (storage tank mounting) digital control, W x H x D: 340 x 560 x 270 mmFWS40HYDROST Tap capacity 2 - 40 l/min, Copper brazed plate heat exchanger 2536 1.490,-

FWS40HYDROSTIN Tap capacity 2 - 40 l/min, steel brazed VA plate heat exchanger 2538 1.790,-

FWSZP3 3 m circulation pump incl. circulation eccentric 2118 317,-

STEP 3� Solar charging module for SONNENTANK (storage tank mounting) W x H x D: 330 x 730 x 290 mmBL25ST Solar charging module up to 25m2 sollector area incl. presetted STRGO controller 2484 1.290,-

POSSIBLE SONNENTANK SYSTEM STORAGE APPLICATIONS

+ WATER + WATER + ELECTRICITY + WATER + HEAT + WATER + HEAT + ELECTRICITY

500 Liter 2.380,- 3.520,- 3.670,- 4.810,-

800 Liter 2.680,- 3.820,- 3.970,- 5.110,-

1000 Liter 2.780,- 3.920,- 4.070,- 5.210,-


14

NEW

WATER

HEAT

ELECTRICITY

OPTIONAL 4� SONNENBOOSTER system optimizer for combination with SONNENTANK storage tankSystem optimizer mounted in switch board swithes on SONNENBOOSTER at surplus energy from photovoltaic system. By this function is system efficiency essential higher. Solution is compatible with all SG ready appliances such as heat pumps, car charging stations. It is also compatible with different types of inverters (SMA; kostal, SolarEdge).

SOBOO52 5,2 kW SONNENBOOSTER, thread 6/4", built in lenght 750mm, electrical disconnectable due to el. plug, M-bus control or 0-10V. (7 steps), 4 inputs for PT1000 sensors

2521 645,-

SOBOOSO System optimizer consists of: Energy meter, Network switch, Control signal: analog Mode (0-10V), Modbus TCP. Integrated Legionella protection Management, Possible visualisation on PC or tablet.

2531 495,-


15

1 - 7 á 750 W

B

A

Inverter

Switch-board

domestic hot water


Solar

powe

r mod

ules

Power grid

Fresh water module

system optimization management

LAN-connection

Sonnenbooster

SONNENTANK STORAGE TANK FUNCTIONSSpecial designed internal structures in SONNENTANK enable perfect temperature stratification. SONNENBOOSTER is heating as priority the upper zone due to chimney effect. In combination with heat pump is SONNENTANK one of the most efficient storage tanks on the market. Due to perfect heat flow in heat pump or PV aplications is the upper zone heating time just half so long compared to standard tanks.

Cold water

Hot water Solar flow Solar return

Solar flow (sec.)

NEW

A At surplus solar electrical energy switches the system optimizer in 7 steps the solar booster. By this application is electrical energy storaged as heat energy. Each step enlarge the power by 750W.

B By solar booster is domestic hot water in summer time properly heated. It prolong the life expectancy of heatpump by reducing the switch on/swich off sequences of compressor.

WATER PATENTED FRESH WATER MODULE New FWS haet exchanger includes special separating plate which enables already chilled water to mix with hot water from the tank. This principle prevent heat exchanger to be overheated over 60°C.

HEAT SOLAR CHARGING MODULE Optimal heat transfer in charging station heat exchanger increases the system efficiency. Position of module enables easy mounting, presetted controller makes the first commissioning easy and fast.

ELECTRICITY SONNENBOOSTER

Surplus solar electricity is, thanks to special solar booster, possible to store in the tank as heat. For example: Take 1000L tank in combination with heat pump. Heat pump has till 40°C good COP. So we heat the tank with heat pump up to 40°C. SONNENBOOSTER can use the surplus electricity from your solar PV plant and heats the tank up to 85°C. This means we have stored 52kWh of electrical energy in the tank as heat.

• Tap capacity up to 160 l/min with 4 pcs. connected in parallel• Hot water is even supplied during maintenance work• Service life balancing, thermal disinfection

FRESH WATER MODULE CASCADE

FRESH XLFRESH WALL

FRESH TOWER

Multiple-family dwelling [apartments] Hotel [beds] Sports facilities [showers]

2 series 80 l 20 20 6

3 series 120 l 25 - 40 30 - 50 10 -15

4 series 160 l 50 - 70 60 - 120 20

Tap points: 1 x shower, 1 x washbasin, 1 x kitchen 1 x shower, 1 x washbasin 100% of showers in usesimultaneously

suggested collector area 1,5 - 2 m2/persons 1 - 2 m2/bed from 15 m2

suggested tank volume 50-100 l/m2 collector surface 50-75 l/m2 collector surface from 1.000 l

STEP 2� Accessories FRESH WALLKASKVS Piping set (1 pc. per module), insulated, DN50 connection dimension (stainless steel),

incl. mounting bracket for quick and easy installation to FRESH WALL2214 613,-

KASKHS Hygiene set (1 pc. per cascade) for FRESH WALL incl. connection set (4 x 2" caps), only with KASKVS

2215 140,-

OPTIONAL� Accessories FRESH WALL and FRESH TOWERKASKUVENT25 DN25 return flow diverter valve (1 pc. per cascade), recommended for FRESH WALL or

FRESH TOWER with 2 modules (80 l), note hydraulic dimesnioning2199 112,-

KASKUVENT40 DN40 return flow diverter valve (1 pc. per cascade), recommended for FRESH WALL or FRESH TOWER with 3 modules (120 l) or 4 modules (160 l), note hydraulic dimesnioning

2332 520,-

KASKZP6 6 m circulation pump, recommended for FRESH WALL and FRESH TOWER 2220 239,-

KASKZP10 10 m circulation pump, data exchange system, multi-display, dry-run protection, autom. ventilation functionn, recommended for FRESH WALL and FRESH TOWER

2221 1.045,-

STEP 1� SELECT cascade set Plate heat exchanger copper brazed Plate heat exchanger steel brazedTap capacity l/min 2 - 80 2 - 120 2 - 160 2 - 80 2 - 120 2 - 160

Numver of fresh water modules pcs. 2 3 4 2 3 4

Sets FRESH TOWER pre-assembled and ready to connect on the substructure. Includes piping, hygiene set, electrical wiring, cascade valves, control units, communication module

€ 5.215,- 8.304,- 10.431,- 5.642,- 8.938,- 11.284,-Matchcode FWSHYD80T FWSHYD120T FWSHYD160T FWSHYD80TIN FWSHYD120TIN FWSHYD160TIN

Art. N° 3002 3003 3001 2324 2325 2326

Sets FRESH WALL for wall mounting. Includes cascade valves, control unit, communication module, optional piping set

€ 3.815,- 5.499,- 7.183,- 4.449,- 6.450,- 8.451,-Matchcode FWSHYD80W FWSHYD120W FWSHYD160W FWSHYD80WIN FWSHYD120WIN FWSHYD160WIN

Art. N° 3004 3005 3006 3495 3496 3497


16

STEP 1� Select collector connection-setcorrugated hose DN16 corrugated hose DN20 corrugated hose DN25

PFM Transition directly to corrugated pipe GSPFMWR16 2580 105,- GSPFMWR20 2581 113,- - - -

SKR500 Transition to 2 x 1" male ASK16SKR 141 868 30,- ASK20SKR 141 869 30,- ASK25SKR 141 870 42,-

STEP 2� Select flexible stainless steel corrugated hoses(fully insulated, UV-resistant, integrated sensor cable in solar flow, for indoor and outdoor)

Stainless steel corrugated hose 10 metres EWRID16/10 141 809 218,- EWRID20/10 141 812 275,- - -

Stainless steel corrugated hose 15 metres EWRID16/15 141 810 327,- EWRID20/15 141 813 395,- - -

Stainless steel corrugated hose 20 metres EWRID16/20 141 811 436,- EWRID20/20 141 814 525,- EWRID25/20 141 848 587,-

Stainless steel corrugated hose 50 metres EWRID16/50 141 815 1.086,- EWRID20/50 141 816 1.310,- EWRID25/50 141 849 1.690,-

STEP 3� Select matching solarstation connection setRLGHE Transition to 2 x CU22 ASRLG16 141 877 37,- ASRLG20 141 878 37,- - -

SST25 / SSTX Transition to 2 x 3/4" AG ASSST16 141 874 24,- ASSST20 141 875 24,- - -

SL / BL Transition to 2 x 1" IG ASSL16 141 885 29,- ASSL20 141 886 29,- ASSL25 141 887 42,-

optional accessories

Mounting clamp set consisting of 4 oval pipe clamps, anchors and bench screws

EWRIDM16 141 825 26,- EWRIDM20 141 826 26,- EWRIDM25 141 853 26,-

Coupling set consisting of 2 couplings, for extension of EWRID

EWRIDK/16 141 827 37,- EWRIDK/20 141 828 42,- EWRIDK/25 141 854 74,-

Copper pipe connection set, 2 pcs. transistion EWRID - CU22

ASCU16 141 831 42,- ASCU20 141 832 42,- ASCU25 141 855 42,-

• High-quality stainless steel double corrugated hose incl. UV-resistant insulation• Includes sensor cabling• Metallic sealing fittings

1

2

3

Selection guide piping

Dimensions EWRID

Maximum available collector surface area per collector field – number of collectors can be increased through parallel connection of collector fields.

Ø Length Collectors

SKR500, PFMS DN 16 10 m 4 pcs.DN 16 15 m 4 pcs.DN 16 20 m 4 pcs.DN 20 10 m 6 pcs.DN 20 15 m 6 pcs.DN 20 20 m 6 pcs.

SKR500L, PFMW DN 16 10 m 5 pcs.DN 16 15 m 5 pcs.DN 16 20 m 5 pcs.DN 20 10 m 6 pcs.DN 20 15 m 6 pcs.DN 20 20 m 6 pcs.

Design specifications in the table are based on 30 l/m2/h; Pump PARA 15/7, water/FS antifreeze concentrate = 60% / 40% at 40˚C. For the pressure losses in pipe bends, 30% of the straight pressure loss is used, 50 mbar for solar station and storage tank.

ACCESSORIES

PIPING


17

Antifreeze for flat plate collectors The pH after dilution with water should be checked periodically and should not fall below 7.5

FSK10 10 l container, concentrate 140 005 56,-

FSK25 25 l container, concentrate 1453 135,-

FSM25 25 l container, ready-mixed fluid, up to -25° C 1799 95,-

SOLAR expansion tanks Approval according to 97/23/EG, operating temperature 120°C, max. operating pressure 6 bar, Pre pressure 2,5 bar

AG18 Expansion tank 18 l, connection G 3/4“, for wall mounting 1335 42,-

AG25 Expansion tank 25 l, connection G 3/4“, for wall mounting 1336 54,-

AG35 Expansion tank 35 l, connection G 3/4“, as standing tank 1337 64,-

AG50 Expansion tank 50 l, connection G 3/4“, as standing tank 1338 96,-

AG80 Expansion tank 80 l, connection R 1“, as standing tank 1339 161,-




AG300* Expansion tank 300 l, connection R 1“, as standing tank 1377 494,-

AG500* Expansion tank 500 l, connection R 1“, as standing tank 1608 738,-

Accessories

MAGAS/1500 MAG connector, stainless steel corrugated hose, without insulation, length = 1.5 m, 3/4" female connector

141 531 17,-

KVAG50 3/4" female cap valve, test unit with drain tap (AG18 - AG50) 1093 22,-

KVAG80 1" female cap valve, test unit with drain tap (AG80-AG500) 1094 32,-

AGVS Connection-set AG for DHW incl. stainless steel corrugated hose, cap valve and hanging bracket 141 324 59,-

• Biodegradable antifreeze and corrosion protection• Specially developed for solar plants• Different container sizes

up to coll. surface area

FS (l) AG

5 m2 10 18

7,5 m2 10 25

10 m2 20 35

12,5 m2 20 50

15 m2 25 50

20 m2 30 80

25 m2 30 80

Dimensioning for antifreeze and expansion tanks

ACCESSORIES

ANTIFREEZE / AG

Note on FS: Set dimensions are based on a static height of approx. 10 m, approx. 20 m EWRID/CU pipe, 6 bar safety valve, optimum system pressure, favourable collector field stagnation behaviour, 40% glycol.

Amount of concentrate required when mixing 40% FS with 60% water (down to -24°C) (values valid for approx. 30 metres of Cu22)

Note on expansion tank: Table valid for approx. 30 m of Cu22 and Δh = 5 to 15 m/pipe

*delivery time > 3 weeksAll prices in Euro excl. VAT, valid until further notice. Subject to typographical and printing errors as well as technical changes and price changes.Discount group: Heating Electricity

18

Accessories

TBM20 Thermostatic 3/4" domestic water mixer, incl. backflow inhibitor 120 013 66,-

TBM25 Thermostatic 1" domestic water mixer, incl. backflow inhibitor 120 014 133,-

Electrical heating cartridges Electrical heating cartridges with 6/4" screw-in thread, can be used only for additional heating.

EHP25 2,5 kW, 400 V can be switched to 230 V, 390 mm fitting length 120 001 182,-

EHP45 4,5 kW, 400 V, 470 mm fitting length 120 002 202,-

EHP6 6.0 kW, 400 V, 620 mm fitting length 120 003 286,-

EHP9 9.0 kW, 400 V, 780 mm fitting length 120 004 301,-

Solar flow quantity meter

DMS20 Flow quantity meter, 3/4" female, 2 to 12 l/min (coll. surface area 5 to 30 m2), max. 130˚C 130 005 150,-

DMS25 Flow quantity meter, 1" female, 10 to 40 l/min (coll. surface area 30 to 120 m2), max. 130˚C 130 006 156,-

DMS20/HT Flow quantity meter, 3/4" female, 2 to 12 l/min (coll. surface area 5 to 30 m2), max. 185˚C, incl. connection set

130 336 192,-

DMS25/HT Flow quantity meter, 1" female, 10 to 40 l/min (coll. surface area 30 to 120 m2), max. 185˚C, incl. connection set

130 337 197,-

3-way motorvalves

DWV20 3-way motor valve, 3/4" female, with spring return 130 007 85,-

DWV25 3-way motor valve, 1" female, with spring return 130 008 87,-

3-way fixed value controller

Can be set between 40˚C to 70˚C to limit temperature, incl. thermal actuator and capillary tube. Installation according to instructions

DWF20 3-way fixed value control unit, 3/4", incl. thermal actuator 130 009 192,-

DWF25 3-way fixed value control unit, 1", incl. thermal actuator 130 010 208,-

Stainless steel pipes, insulated Stainless steel corrugated pipes with 1" female/1" male screw connections, for solderless and flexible piping inside the house and for absorbing thermal expansion

AV50 Corrugated pipe connection hose, 50 cm long, insulated 1077 23,-

AV150F Corrugated pipe connection hose, 150 cm long, insulated 2541 39,-

AV300F Corrugated pipe connection hose, 300 cm long, insulated 2542 59,-

Air vents

ELT22 Air vent, 22 mm, with weatherproof insulation 140 002 70,-

Filling pump

FPPRO Filling pump with cask, hose and pressure pump, 230 V, 50 m delivery height 141 633 695,-

• Professional equipment for startup and maintenance• Screw-in electrical heating cartridges• Various accessories and spare parts

ACCESSORIES

COMPONENTS


19

IHR STARKER SONNENKRAFT-PARTNER:

Vers

ion:

202

0-05

-26

Your Sonnenkraftpartner:

heat water electricity - termotehnika€¦ · design-flat plate collector skr500 • unique flat...

Documents