www.aira.com.au

Heating & cooling Australia since 1965

www.aira.com.au

AIRA has been a leading Australian manufacturer and supplier of commercial and industrial products since 1965.

AIRA supplies in standard and custom built Boiler, Heater, Cooler, Radiant heating and Energy recovery systems for a wide range of Industrial, commercial and Residential applications.

AIRA equipment is specified and sold to a diverse range of users both in Australia and across the globe.

AIRA has manufactured boilers and fluid heaters for major mining companies worldwide with units supplied to mine sites in Africa, Ghana, Russia, South America, Indonesia, New Zealand, Fiji, Papua/New Guinea as well as many sites in Australia.

The modern manufacturing and distribution facility is located at Bayswater North, Victoria where boilers, heaters, energy reclaim air handling units and coolers are designed, manufactured, and tested. AIRA also imports a range of boilers, heaters and energy recovery systems.

AIRA supplies direct and indirect gas fired heaters, superay radiant heaters, radiant tube heaters, evaporative coolers, energy recovery units and boilers. AIRA is a major Australian manufacturer of condensing boilers.

With a national agent network AIRA is committed to provide national customer service and industry expertise.

OUR PROJECTSThe Aira advantage is flexibility of construction.

THE PROJECT: Attwood Test Facility

THE CHALLENGE: To provide a system to allow each greenhouse independent control over temperature and humidity.

THE SOLUTION: AIRA designed a heating cooling ventilating return air unit with fire screen and outdoor filters allowing individual greenhouse condition control.

THE ADVANTAGES: • Much lower operating costs than comparable DX air conditioning systems.• Allows for limited humidity control.• Runs fresh air only over a broad temperature range.• Lower capital costs than comparable units.

THE PROJECT: Grand Central Apartments (Southbank Grand)

THE CHALLENGE: To provide an energy efficient system to effectively ventilate the lobby and open area.

THE SOLUTION: AIRAs Indirect Heating Cooling Ventilation System (IDC)

THE ADVANTAGES:• The dry air evaporative precooling system provides a reduction of up to

12 degrees without adding moisture to the incoming fresh air.• Incoming fresh air is filtered.• The DX coil size and demand is greatly reduced.• Allows ambient air in mild conditions.• Power load and consumption is significantly reduced.

THE PROJECT: Attwood Test Facility

THE CHALLENGE: Heavy duty, high efficiency condensing boilers.

THE SOLUTION: Australian made AIRA FTC condensing boilers.

THE ADVANTAGES:• 96% condensing efficiency.• Compact design.• Duplex 2205 stainless steel heat exchanger.• Australian designed for Australian conditions.

FTA Boiler Fire tube boiler, European made• (180-1600kw) capacity, 85%

efficient.• Installed indoors or outdoors.• Natural Gas, LPG, TLPG, oil, diesel

or duel fuel.• Suitable for use with flue recovery

units. Up to 7% efficiency gain.• Variety of control options.

Ambassador Condensing Boiler High efficiency condensing boilers • (60-360 kW) High quality European.• Wall hung or floor mounted.• Internal or external.• Inbuilt pump.• Inbuilt cascade controls.• Light weight, easy access and

flexibility of design.• Natural Gas or LPG .• Stainless steel heat exchanger, air

bleed and programmable control.• Skid mount option.

ARK Condensing Boiler Wall hung European built boilers• (34-100kw) high efficiency up

to 92%.• Internal and external.• Cascadable up to 2160kw.• Stainless steel heat exchanger.• A type commissioning.• Natural gas or LPG.

Senator Condensing Boiler High efficiency condensing boilers • (400 and 550 kW) capacities.• High quality European.• Floor mounted• Stainless Steel heat exchanger.• Dual heat exchanger design

allowing partial operation.• Compact design, only 740mm wide. • Cascadable up to 3.3MW.• Natural Gas or LPG.• Easy access to all components.• Internal or External.

Cast Iron Boiler 3 Pass floor standing boilers• (163-1030kw) capacity.• Supplied complete or

disassembled.• High heat transfer surface area.• Natural Gas, LPG, oil or dual fuel

suited.• Compact design.

Laars Atmospheric Boiler Atmospheric boiler, Australian made • (122-1200kw) Indoor or outdoor up

to 83% efficient.• Modulating or On/Off.• Can dismantle the boiler for

access in difficult locations.• Natural Gas, LPG or TLPG.• Single or two pass designs.• Glass lined cast iron headers and

a durable copper heat exchanger.• Used for shopping centres,

bakeries, schools, apartments, pools, etc.

FTB BoilerFire tube boiler, Australian made • (300-3000 kw), 85% efficient.• Heavy duty construction.• Natural Gas, LPG, TLPG, oil, diesel

or duel fuel.• Internal or external.• Suitable for use with flue recovery

units. Up to 7% efficiency gain.

FTC Condensing Boiler Condensing boiler, Australian made• (150 - 3000kw) cpacity, up to 97%

efficient.• 2205 duplex stainless steel

condensing section.• Weatherproofing, special sizes &

alternative flue options available.• Natural Gas, LPG, TLPG, diesel or

dual fuel.• A wide variety of control options.

BOILERSAIRA manufacture and supply a wide variety of boilers.

Neutraliser KitsCondensate Neutraliser Tank• Reduces acidic condensate from

corroding drains and sewer systems.

• Fast easy installation.• Low profile design.• Corrosion resistant materials.• Suitable for use on all types of

appliances.

Expansion Tanks• 14-1000 L expansion vessel

complete with replaceable Butyl rubber bladder, pressure gauge and Schrader fill valve.

Cowls• Wide range of and cowls

available.• To suit 150 - 800mm flues.• Optional stainless steel.

Other ServicesAIRA also offers a range of other services including:• Bespoke manufacture of a range

of products.• CAD 3D modeling of products.• In house engineering solutions.• Range of spare parts available.

BOILER ACCESSORIESAIRA manufacture and supply a wide range of competitively priced accessories for boilers. The AIRA advantage is flexibility of construction.

Air & Dirt Separators (ADS) Australian made• Manufactured in Australia to suit

individual requirements.• Supplied bare or insulated to

suit chilled water or hot water applications.

• Vinyl, colorbond, stainless or aluminum cladding.

• Air bleed and drain connections.

Hydraulic Separators (AHS) Australian made• 4 flanges to allow even water

distribution through the system.• Supplied bare or insulated to

suit chilled water or hot water applications.

• Vinyl, colorbond, stainless or aluminum cladding.

• Air bleed and drain connections.

Buffer Tanks Australian Made• (200-5000 L) capacity. • Up to 40 000L on request.• Standard mild steel or optional

stainless steel.• Standard 2 flange. Can be built with

a variety of flanges, baffle plates, swage pipes & alternative heights to suit a various plant room layouts.

• Optional access hatches.• Temperature and pressure

connections.• Bare tank or R2 insulated with a

tough ripstop vinyl cover or standard cladding.

Dosing Pots• (15-45 L) capacity. • Stainless steel dosing pot kit

complete with isolation valve & fill spout.

Calorifiers (C & C) C & C Metals Calorifiers Australian made• Manufactured in a diverse range

of sizes and capacities up to 25,000 L.

• Removable tube bundles.• Access hatches.• Duplex Stainless Steel

construction.

Autofill Systems Australian made• Auto-fill unit to maintain closed

system pressurisation systems upto 5 bar, complete with single phase centrifugal pump, tank, ball valve and weatherproof cabinet.

• Variety of control options available.

Dravo Gas Heaters (SD/DU) Indirect Fired Gas Heaters, Australian made• (23-189 kW ) Internal or external.• Stainless steel heat exchanger with 5 year warranty.• Natural Gas fired.• Range of control options including On/Off,

modulating and modulating with leaving air temperature.

• With or without a fan blower.• High temperature output.• Wide variety of specialist applications.

Superray Heaters Made in New Zealand• Natural or LPG gas• Manual and electronic models.• Indoor and external models.

Radiant Tube Heating (ATH) Roberts Gordon range of radiant tube heating. • Single tube, U-tube and specialist

configurations.• Flued or Un-flued.• Natural Gas, LPG or TLPG .• Optional Ball Guards.• Fresh air intake.• Variety of control options.

Heating Cooling Ventilating Units (HCV)Australian made• Single pass or return air (HCVR) options.• Stainless steel heat exchanger with 5 year warranty.• Cooling air bypass option.• Natural Gas fired.• Make up air for kitchens.• Suit schools, prisons, factories, showrooms and

manufacture. • VSD, BMS, unitary control options.• Weatherproof cabinet.• 18-140kw capacity and up to 16,000 L/s of air.• Adjustable pitch roof stands available.

Indirect Heating Cooling (IDC)Australian made• Dry air evaporative pre-cooling up to 12 degrees.• Reduced power load and consumption.• Axial fan exhaust.• Stainless steel heat exchanger with 5 year warranty.• Natural Gas fired.• DX coil backup.• Filtered air inlet.

Heat Recovery Unit (AHE)Energy recovery system, Australian made• Air duty 400-12,000 L/s.• Sensible or enthalpy heat exchanger.• Flexible design capacity. • Variable air flow.• Options to add coolers, heaters,

passivated coils, dampers, filters and more.

Direct Flow Air Heaters (LU)Australian made• (127-975kw) output fresh air up to 55 degrees.• Air flow up to 30,000 l/s. • High air volume flow-rate.• Internal or external.• Natural Gas, LPG or TLPG. • Complete unit, no flue required.

Enthalpy Heat Exchanger (ICE)In-Ceiling Heat Recovery Fresh Air Ventilator• 50-600 L/s air volume.• Counter flow exchanger core.• Enthalpy or sensible • Reclaim up to 70% of waste energy.• Reduces the load on air conditioning system.• Compact and easy to maintain units.

Indirect Fired Heaters (SDF) Indirect fired gas heaters, Australian made• (23-96kw) Internally suspended.• Axial fan.• Stainless steel heat exchanger with 5 year

warranty.• Natural Gas fired.• On/Off Automatic Ignition.• Remote control option.

Gas Fired Duct Heaters (GDH) Direct Fired Blower Heater, Australian made• (100-732kw) output with high air volume.• Optional modulating burner with make up air or

continuous ventilation. • Up to 22,000 L/s.• Internal or external.• Natural Gas, LPG or TPLG.• On/Off Automatic Ignition.• Optional remote control panel.

HEATING∙COOLING∙VENTILATIONLargely manufactured here in Australia AIRA offer a diverse range of heating, cooling and ventilating units suitable for a wide variety of commercial and industrial applications.

Heating Cooling Ventilating Units (HCV)Australian made• Single pass or return air (HCVR) options.• Stainless steel heat exchanger with 5 year warranty.• Cooling air bypass option.• Natural Gas fired.• Make up air for kitchens.• Suit schools, prisons, factories, showrooms and

manufacture. • VSD, BMS, unitary control options.• Weatherproof cabinet.• 18-140kw capacity and up to 16,000 L/s of air.• Adjustable pitch roof stands available.

HEATING∙COOLING∙VENTILATIONLargely manufactured here in Australia AIRA offer a diverse range of heating, cooling and ventilating units suitable for a wide variety of commercial and industrial applications.

Wall Mount Evaporative Coolers (ALA)Australian made• Air duty range of 6000-11,300 L/s.• High efficiency (80% efficient) long life

CELPAD pads.• Heavy duty marine grade aluminium

cabinet.• Low water content ABS corrosion

resistant water reservoir.• Axial fan.• Easy wall mount.

Stirling Evaporative Cooler• Top, Side and Down discharge.• 100mm thick CELPAD pads.• VSD and 2 fan speed options.• Water level sensors.• 10 year cabinet warranty.• LCD wall controller (AZL16/18/20

only).• Automatic dump cleaning.

Evaporative Coolers (AL)Australian made• Air duty up to 23,000 L/s.• High efficiency (80% efficient) long life

CELPAD pads.• Heavy duty marine grade aluminium

cabinet.• Low water content, ABS corrosion

resistant water reservoir.• Top, Side and Down discharge options.• Adjustable pitch roof stands available.• Available in stainless steel.

Longlife CELPAD Pads

OptionalMotorised Dampers

Optional MetalLouvre Cover

Optional Mesh Cover

Optional heater shown

Heavy duty DUPLEX 2205 stainless steel was developed for the chemical and mining industries for superior strength and corrosion resistance compared to standard 304 and 316 stainless steel variants commonly used in most imported condensing boilers.

DUPLEX 2205 stainless steel has almost twice the strength and corrosive resistance to 316 stainless steel when used at higher temperatures normally experienced in hot water boilers.

Compared to imported condensing boilers, the AIRA FTC TITAN is uniquely AUSTRALIAN MADE utilising DUPLEX 2205 stainless steel throughout the entire condensing section in contact with the corrosive flue condensate produced by a condensing boiler.

The long term benefits of DUPLEX 2205 can be easily determined by thegraph shown.

www.aira.com.au

Strength and Relative Corrosion Resistance Duplex 2205 vs 304/316 Stainless Steel

• Duplex 2205 Stainless steel condensing section.• 5 year heat exchanger warranty.• Up to 97% efficiency.• 6:1 modulation turn down.• 600kPa operating pressure.• Natural gas, LPG, TLPG, Oil, Diesel or dual fuel.• Low pressure drop.• Low water flow capable.• Dual hinge front door.• Volt free BMS run and fault interface.• Remote Temp Setpoint reset capable.• Relief valve fitted.• Pressure and temperature gauges fitted.• Compact footprint.

FEATURES

• Operating pressure up to 1100kPa.• Hi level BMS Interface MODBUS/BACNET.• VSD fan modulation control• 10:1 modulation turn down with option up

to 15:1.• Weatherproof cabinet.• Condensate neutraliser kit.

OPTIONS

THEDUPLEX2205STAINLESSSTEELADVANTAGEFTC TITAN CONDENSING BOILER