8/7/2019 HellFighter 4 by SureFire

http://slidepdf.com/reader/full/hellfighter-4-by-surefire 1/2

Shown: HF4A KIT01

HELLFIGHTER® 4WEAPONLIGHT / SEARCHLIGHT / IR ILLUMINATOR

18300 Mt. Baldy Circle, Fountain Valley, CA 92708 • 714-545-9444 • 800-828-8809 • Fax: 714-545-9537 • www.surefire.com

Model: HF4A KIT01

UPC: 084871316477

FEATURES & BENEFITS

• Dual swing-open filter/cover system allows quick configuration

for unfiltered white light, filtered IR output, or protective cover

• Carry handle integrated into rail mount reduces profile

• Integral rechargeable battery provides 30 minutes of runtime at

high output

• High-output, low-output, and stobe capability from HID lamp

• Modified reflector provides better reach and wider peripheral beam• Durable lightweight power cables

• Picatinny rail adapter clamp

Prices and specifications subject to change without notice.

DIMENSIONS:  11.0” L x 6.0” W x 7.4” H (27.9 cm x 15.2 cm x 18.8 cm)

RUNTIME:  12 VDC vehicle system: continuousBA-5590 military battery: one, 1.5 hours; two parallel, 3+ hours

Integral rechargeable battery: 30 minutes

BEZEL DIAMETER:  4.1” (10.4 cm)

WEIGHT:  6.5 lbs. (2.95 kg)—HellFighter with filters/cover

SPECIFICATIONS

©2011 SureFire, LLRev. 1.11.11

OUTPUT:  High: 3,000 lumens Low: 1,000 lumens

CONSTRUCTION:  Aerospace aluminum body, Mil-Spec Type-III hard anodized

Export of select products shown requires a valid export license issued by the U.S. Department of State.

Battlefield experience using the successful SureFire HellFighter(HF1) has led to the next generation heavy weapon illumina-tor—HellFighter 4 (HF4). The most significant improvement is anintegral rechargeable battery that can run the HF4 at full output for30 minutes. The integral battery not only serves as a backup to theother two power options—vehicle outlets and BA-5590 disposablebatteries—but also makes the HF4 more compact and convenientto use as a handheld spotlight/searchlight.

The rail mount performs double duty as a carry handle. The railmount itself has been modified to include both the original heavy-duty T-rail clamp and an intermediary adapter mount that permitsattaching the HF4 to a Picatinny rail.

Another change is selectable output. When attached to the UH-01E

EXTERNAL POWER:  Two BA-5590 Li-SO2 Primary Batteries12 VDC (with UH-05DB 24 VDC to 12 VDC NATOSlave Cable Adapter)

INTEGRAL POWER:  Lithium Ion battery pack, 11.25 V, 2.8 Ah, 31.5 Wh

AMP DRAW:  Start Up: ≤9 Amps High: ≤4 Amps Low: ≤2.5 Amps

OPERATING TEMPERATURE RANGE: 

Vehicle Power Supply: -50°C/-58°F to +72°C/+162°FTwo BA-5590 Li-SO2 Batteries: -30°C/-22°F to +72°C/+162°F

INFRARED (IR) WAVELENGTH RANGE: 730 nm – 4600 nm

STROBE MODE:  Approximately 9 Hz

HF4A DIMENSIONS: Length: 11” / 27.9 cm x Width: 6” / 15.2 cm x Height; 7.4” / 18.8 cm

HF4A SYSTEM WEIGHT: 

HF4A (no cables): 6.5 lbs / 2.95 kgHF4A + UH-01E cable: 8.6 lbs / 3.9 kgHF4A + UH-01E + UH-05DB cables: 10.6 lbs / 4.8 kg

UH-01E CABLE: Length: 8’ / 243.8 cm Weight: 2.1 lbs / .95 kg

UH-05DB CABLE: Length: 7’ / 213.4 cm Weight: 2 lbs / .91 kg

HFM-09 MOUNT:

Length: 25.6” / 65 cm x Width: 5.75” / 14.6 cm x Height: 2.9”/7.4 cmWeight: 3.89 Pounds/1.76 kg

power cable—which includes a new grip switch for the M2HB ma-chine gun—the operator can choose high output (3,000 lumens),low output (1,000 lumens), or strobe mode that flashes about ninetimes per second (9 Hz). The UH-01E power cable is backward-compatible with the original HellFighter, but does not provide high/ low output or strobe capabilities to that device. All HellFighterpower cables now feature a high-strength polymer sheathing thatmakes them thinner, lighter, more flexible, and more durable.

Finally, the HF4 features a dual swing-open filter/cover system, al-lowing the operator to quickly choose unfiltered white light, filteredinfrared illumination, or an opaque protective cover. The HF4’sreflector has also been modified to provide better beam reach andwider peripheral light for situational awareness.

Model: HF4A (Light + Case)

UPC: 084871316533

THE WORLD’S FINEST ILLUMINATION TOOLS, SUPPRESSORS, AND TACTICAL PRODUCTS™

8/7/2019 HellFighter 4 by SureFire

http://slidepdf.com/reader/full/hellfighter-4-by-surefire 2/2

Prices and specifications subject to change without notice. Export of select products shown requires a valid export license issued by the U.S. Department of State.

MOUNTS & CABLES

©2011 SureFire, LLRev. 1.11.11

HELLFIGHTER®

4WEAPONLIGHT / SEARCHLIGHT / IR ILLUMINATOR

18300 Mt. Baldy Circle, Fountain Valley, CA 92708 • 714-545-9444 • 800-828-8809 • Fax: 714-545-9537 • www.surefire.com

HFM-09Attaches directly to Mk93 weaponmount for attaching an HF1 or HF4for use with M2HB, Mk19, M240, andM249. Comes with HellFighter T-railand one Picatinny accessory rail.

M87AAttaches the HellFighter or theHellFighter 4 to M2HB machine gunwithout gunner shield. Comes withHellFighter T-rail and two Picatinnyaccessory rails.

M88AAttaches the HellFighter or theHellFighter 4 to M2HB machinegun with or without gunner shield.Comes with HellFighter T-rail andthree Picatinny accessory rails.

M89AAttaches the HellFighter or theHellFighter 4 to M134 Minigun.Comes with HellFighter T-rail andtwo Picatinny accessory rails.

M96Universal swivel/tilt mount forHellFighter or HellFighter 4. FitsM100 plate and stud mount (not

included). Also fits original lightmount stud for AAVP7A1 “AmTrack.”

M100Plate and stud mount. Providesuniversal attachment pointfor M96 HellFighter mount

(not included).

M99A / M99BHellFighter T-rails. Componentsof other mounts but can be usedto attach either HellFighter to any

suitable location. M99A rail (top)is 4.35” long, M99B (bottom) is 5.85”long, has offset base of same length.

UH-01DConnects original HellFighter to oneor two BA-5590 batteries. Includessocket for optional UH-01DA, UH-

05DA, or UH-05DB adapter cables.Branching cable has SW-M2HB-01 gripswitch to activate HellFighter. Installa-tion wrenches included.

UH-01EConnects HellFighter 4 to one ortwo BA-5590 batteries. Includessocket for optional UH-01DA,UH-05DA, or UH-05DB adaptercables. Branching cable hasSW-M2HB-03 grip with high, low,strobe switches. Installationwrenches included.

UH02Connects HellFighter to one BA5590battery inside a BCH-1MIL-BK hardcase. Cable is flexible coil type.Includes in-line plug for HellFighterpower input socket, in-line plugfor battery socket, branchingcable with pressure-activatedtape switch.

UH-05DAConnects UH-01D or UH-01E cablesto 12-volt vehicle accessory socket(cigarette lighter type) as an optionalpower source for HellFighter orHellFighter 4. NOTE: UH-01DAmodel still available if shorter18” length is desired.

UH-05DBConnects UH-01D or UH-01Ecables to 24-volt NATO slavesocket and converts output to 12volts as an optional power sourcefor HellFighter or HellFighter 4.

THE WORLD’S FINEST ILLUMINATION TOOLS, SUPPRESSORS, AND TACTICAL PRODUCTS™