hemosphere advanced monitoring platform...hemosphere advanced monitor screen features monitoring...
TRANSCRIPT
HemoSphere Advanced Monitoring Platform Setup guide
Parameter tile
Navigation bar Main windowPowerbutton
Status bar Visual alarm indicator
Information bar
Hem
oSphere platform
HemoSphere advanced monitor screen features
Monitoring mode
Start/stop monitoring
Time-in-Target software
Zero and Waveform
Intervention analysis
Continuous blood pressure waveform, available on the following screens:• Graphical trend screen• Main monitoring screen
The settings icon provides access to: • Clinical tools • Settings• Select screens • Help
Silence audible alarm/pause mode
Information bar (located at the top of the screen)
Acumen IQ mode only
Swan-Ganz mode only
Hem
oSph
ere
plat
form
Clinical actions
Changing parameters1. Touch the displayed parameter label located
inside the parameter tile to change it to a different parameter.
2. The tile configuration menu will show the selected parameter highlighted and other parameters currently being displayed outlined. Available parameters appear on the screen without highlight.
3. Select desired parameter to display.
Changing targets and alarms1. Touch the parameter value on a
parameter tile.2. Adjust target values using arrows or select
value and type in parameter target. 3. Select Target to disable or enable colors
in target ranges.4. To silence parameter alarms, select
Audible Alarm button.
Hem
oSphere clinical actions
Pause monitoring1. Hold the Silence Alarm button until monitoring
pause confirmation pop-up appears.2. Confirm suspension of monitoring operations.3. To resume monitoring, touch the Monitoring
Pause Exit button.
ZeroingZero with the stopcock off to the patient and open to air:1. Hold down zero button on the pressure
cable to pull up zero screen.2. Hold down zero button until a tone is
heard to complete zeroing. or Zeroing can be completed by selecting the Quick Zero button to pull up the zero screen, then select Zero.
Hem
oSph
ere
clin
ical
act
ions