hermetic battery disconnect hbd31 - gigavachbd31 hermetic battery disconnect rev 6 7/17/14 advanced...

2

HBD31 Hermetic Battery Disconnect Rev 6 7/17/14 ADVANCED SWITCHING SOLUTIONS FEATURES Hermetic seal breakthrough patent pending technology Meets CE conformance standards - CE Approved Sealed contacts ensures low voltage drop Fiber composite housing and hermetic seal prevent corrosion inside and out Lock-out / Tag-out meets OSHA requirements Ideal for heavy truck, military, construction, material handling, and off-road vehicles Available with continuous ratings of 200A (HBD21), 300A (HBD31), and 400A (HBD41)

Upload: others

Post on 11-Jul-2020

2 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: Hermetic Battery Disconnect HBD31 - GigavacHBD31 Hermetic Battery Disconnect Rev 6 7/17/14 ADVANCED SWITCHING SOLUTIO NS FEATURES Hermetic seal breakthrough patent pending technology

HBD31

Hermetic Battery Disconnect

Rev 6 7/17/14

ADVANCED SWITCHING SOLUTIONS

FEATURES

Hermetic seal breakthrough patent pending technology

Meets CE conformance standards - CE Approved

Sealed contacts ensures low voltage drop

Fiber composite housing and hermetic seal prevent corrosion inside and out

Lock-out / Tag-out meets OSHA requirements

Ideal for heavy truck, military, construction, material handling, and off-road vehicles

Available with continuous ratings of 200A (HBD21), 300A (HBD31), and 400A (HBD41)

Page 2: Hermetic Battery Disconnect HBD31 - GigavacHBD31 Hermetic Battery Disconnect Rev 6 7/17/14 ADVANCED SWITCHING SOLUTIO NS FEATURES Hermetic seal breakthrough patent pending technology

PRODUCT SPECIFICATIONSSpecifications Units DataContact Arrangement Form X SPST

Voltage, Test Max, 1 Minute Vdc 5000

Voltage, Operating Max1 Vdc 1000

Current Continuous Carry, Max Overload, 1 Minute Make and Break, 300A @ 24Vdc

AACycles

3002,0005,000

Voltage Drop, Max mV 50

Vibration, Sinusoidal (18-500Hz Peak) G 20

Temperature, Operating Range °C -55 to +85

Weight g 500

Environmental Seal (Exceeds IP69) Hermetic

HBD31Hermetic Battery

Disconnect

PART NUMBER SYSTEMHBD31 A AMounting A=Flange, 100mm

Handle A=Red, non-removeable

B=Black, non-removeable

Notes:

1 For make/break switching above 100V, please contact GIGAVAC.

G IGAVAC® - 6382 Rose Lane - Ca rp i n te r ia , CA 93013 - ph +1- 805 - 684 - 8401 - f a x +1- 805 - 684 - 8402in [email protected] - w w w.g igavac.com - ©Copy r igh t 2003 -2014 G IGAVAC, LLC.

3.94100.1

2X .338.4

38.7R1.53

.338.3

2.7068.6

2X40.91.61

59.92.36

5.8.23

3.5389.8

1.2531.8

62.82.47

2X18.8.74

29.91.18

2X M10 STUDS,SILVER PLATED

31.81.25

3.94100.1

2X .338.4

38.7R1.53

.338.3

2.7068.6

2X40.91.61

59.92.36

5.8.23

3.5389.8

1.2531.8

62.82.47

2X18.8.74

29.91.18

2X M10 STUDS,SILVER PLATED100-120 IN-LBS[11-13.5 Nm]

31.81.25

3.94100.1

2X .338.4

38.7R1.53

.338.3

2.7068.6

2X40.91.61

59.92.36

5.8.23

3.5389.8

1.2531.8

62.82.47

2X18.8.74

29.91.18

2X M10 STUDS,SILVER PLATED

31.81.25

3.94100.1

2X .338.4

38.7R1.53

.338.3

2.7068.6

2X40.91.61

59.92.36

5.8.23

3.5389.8

1.2531.8

62.82.47

2X18.8.74

29.91.18

2X M10 STUDS,SILVER PLATED

31.81.25

mailto:[email protected]

www.gigavac.com

Select-A-Charge Battery Chargers models: SCO, … Battery Chargers . models: SCO, SCOXU . ... For frequent shallow ... Disconnect one charge lead. Plug the charger into AC

New 6200 Battery NA Operator Manual (EN) · 2018. 3. 30. · −Disconnect battery connections and charger cord before working on machine. −Do not pull on battery charger cord to

Copeland hermetic compressors - Scotty's … hermetic compressors for medium temperature refrigeration applications A cost effective hermetic solution Copeland hermetic reciprocating

Dual Input DC-DC · additional heating of the battery. Disconnect all loads and chargers from the battery and allow battery temperature to decrease to operational specifications Turn

Dura-ConTM Hermetic Connectors - Bel Dura-Con Hermetic...Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com

Copeland hermetic compressors...Copeland hermetic compressors for medium temperature refrigeration applications A cost effective hermetic solution Copeland hermetic reciprocating compressors

Unity Low Voltage Disconnect & Monitor - Newmar Power...The LVD Pre-disconnect alarm is a warning to an impending battery disconnect. It is triggered by an adjustable voltage thresholds

ADVANCED Quick Panel Installation Manual Quick... · • Disconnect the Aircraft Battery • Remove the old panel from the aircraft ... • Install Battery in ELT buzzer • Configure

Electro Wizard Battery Disconnect Switch...Flamin iv ndustr 18006488022 4 102589 e 010517 The Flaming River FR1051 Disconnect Switch is designed to disconnect a vehicle electrical

MET ANL 24V, MET ANL 36V, MET ANL 48V, MET LED 24V, MET ... · Safety glasses are a must! Disconnect the battery cables at battery #1 and battery #6. Disconnect batteries #1 and #4

GENERAL INSTRUCTIONS - CacheFly Eclipse.pdfGENERAL INSTRUCTIONS Insulating Tape Battery Battery Cable Before beginning work, turn the ignition key to “LOCK” position and disconnect

Filtered Battery Charger / DC Power Supplysens-usa.com/wp-content/uploads/2015/07/101299-2_E2_ECU...system battery disconnect, if used, and measure the battery voltage at the battery

Hermetic Battery Disconnect HBD41HBD41 Hermetic Battery Disconnect Rev 3 7/26/13 ADVANCED SWITCHING SOLUTIONS FEATURES Hermetic seal breakthrough patent pending technology Sealed contacts

VALANCE & PILLOW ACCENT - Signature Motorhomes · • Solar Charge Controller - Solar Panel Ready Second Auxiliary House Battery Battery Disconnect Switch 6-gallon DSI Gas/Electric

Installation & Maintenance€¦ · 100 and 120 Amp and 3 Stage Charging Option Installation & Maintenance 1. DISCONNECT DC POWER. Disconnect the battery POS (+) wire at the battery

INSTALLATION INSTRUCTIONS · the negative battery cables on both batteries and the positive battery cable on the passenger side battery. Note: Failure to disconnect the ... Carefully

TE Battery Connection Solutions (BCS) HV Contactors · 2013. 11. 7. · Application: Hybrid & Electric Vehicles (EV/HEV/PHEV) Battery Main Disconnect Status: Project Phase: Validation

· The 3-Pole Grabber (tri polar) design was developed ... available • Door mounted battery disconnect switch: BATTERY BACK-UP SYSTEM: SSC CONTROLMASTER: CHARGER CONTROL

Conext™ Battery Fuse Combiner Box€¦ · 17/01/2020 · three Conext™ XW+ inverter/chargers with one battery bank using a single battery pole disconnect method and provides

973-0019-01-02 - Rev A - Fuse Block - Xantrex TFBs to the Battery, DC Disconnect, and Inverter Installation (continued) Wiring TFBs to the Battery, DC Disconnect, and Inverter + -

P03-030 DESCRIPTION - DWG Power/BDM.pdfBDM Battery Disconnect Module Installation Instructions P03-030 DESCRIPTION The Battery Disconnect Module provides protection for the battery

Arizer Solo Battery Replacement Instructionsxpresstek.net/projects/arizer/arizer_battery...Arizer Solo Battery Replacement Instructions 4. Remove old battery from the unit. Disconnect

MODEL: LP3 - DOUGLAS BATTERY LP3 . Legacy® Platinum ™ SCR Battery Charger . ... Before using the battery charger ... The external fusing and/or the line disconnect circuit breaker

Overview - switchpros.com … · Pg. 2 1/2018 Installation Disconnect the negative battery lead from the vehicle’s battery before proceeding with installation, and to avoid

Fitting Instructions for Quartz Halogen Headlamp 911-350 ...hella.com.au/downloads/911-350-89.pdf · 1. ( ) Disconnect the earth cable from the battery. 2. ( ) Disconnect headlamp

Implementing a Battery Disconnect Switch Using 100-V Half

Step1 Disconnect the breaker between inverter and ... · Step2 Switch off all the batteries. Switch off one by one. 02 Step3 Disconnect the power cable, battery terminal. Disconnect

*DISCONNECT BATTERY BEFORE INSTALLATION* It is best to

For your safety Limited warranty AUTO-RANGING DIGITAL ...€¦ · Battery replacement:When the multimeter dis-plays " " the battery must be replaced. Disconnect and unplug leads,

X6 User's Manual - icharger.co.nz · Never leave the charger unsupervised when charging or discharging. If you leave, disconnect the battery and switch If you leave, disconnect the

(MAF) / intake air temperature (IAT) sensor. - JustAnswer · MAIN CONTROL VALVE BODY Removal 1. Disconnect the battery cables. 2. Remove the battery and tray. 3. Disconnect the breather

Battery Disconnect and Protection

Hermetic Battery Disconnect HBD31 - gvtjp.com · HBD31 Hermetic Battery Disconnect Rev 3 7/26/13 ADVANCED SWITCHING SOLUTIONS FEATURES Hermetic seal breakthrough patent pending technology

Section 5 HV Battery Control Systems · engine ECM to increase power to charge the HV battery. If the SOC is ... •ALWAYS disconnect the auxiliary battery before removing the

September 2018 Safety Recall U87 / NHTSA 18V-524 ...Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable. 3. Disconnect