Core-ø 350mmOutside-ø 600mmWidth 400mm

Hydraulic guided constrained winding

Hydraulic driven cable ejector

Hydrostatatic winch drive, additional embedded planetary gear unit with integrated spring loaded fail-safe brake

General Hydraulic supply from base machine, ideal operation pressure 280-350 bar, required flow rate of pump 170 l/min (at 1500 rpm on diesel engine)

Standard Usually the crane pump is used for the drive. The pump should have a load-sensing regulation.

Option An additional pump is used for the winch drive.

Seat-tilt Between seat base and cabin ground installed tilt plate, max. tilt angle on the vehicle's longitudinal axis 23°

Load space extension

The rearmost load bank can be ordered extensible.

Cable drum

Cable winding

Extras

Cable ejection

Drive

Hydraulics

HERZOG ALPINE Synchrowinch FORWARDER

HERZOG FORSTTECHNIK AG

HERZOG ALPINE Synchrowinch FORWARDER

THE STANDARD IN SYNCHRONISATION

WE TURN YOUR FORWARDER INTO A SOIL PROTECTING STEEP SLOPE SPECIALIST

www.herzog-forsttechnik.ch/ Mail: info@h-ft.chForestmachines Hydraulics MechanicsService & Sales of PONSSE for Switzerland

Tel: +41 (0)26 419 90 30Fax: +41 (0)26 419 90 31Allmend 25, CH- 1719 Zumholz

HERZOG FORSTTECHNIK AGTel: +41 (0)26 419 90 30 / info@h-ft.chFax: +41 (0)26 419 90 31Allmend 25, CH- 1719 Zumholz

DimensionsLength 1870mmWidth 810mmHeight 640mmWeight* Ca. 1'900 kg

CablesCable type 1 ø15mm, 300m length,

compacted constructionCable type 2 ø14mm, 350m length, high-

compacted constructionTensile strength

Minimal required tensile strength: 200kN (20 tons)

0 up to 100 kN (0 - 10 tons) continuously variable, con-sequently constant tensileforce (electronic control)

Fix installation on the forwarder's rear frame. The winch has integrated load banks.

Radio remote controlled with continuous variable speed and force adjustment

Automatic Observation of cable failure and slack cable

Cameras Camera overlooking winch drum and rear-view camera and reversing headlight

Electronic synchronous regulation of winch and wheel drive. Automatic gear shift and regulation of the control mechanism of the winch while driving

Observation

Control mechanism, regulation

*Additional weight compared with standard forwarder

Tensile force

Installation

Operation

HERZOG ALPINE Synchrowinch FORWARDER

Due to the tiltable seat the driver can keep a relaxed sitting position while working on steep slopes. This makes the work ergonomical and less tiring.

The constantly measuring instrument shows the actual tensile force of the winch. The camera display shows the image of the rear-view camera and/or the drum-observation camera.

Two types of cable available:ø14mm and 350m length ø15mm and 300m lengthMinimal tensile strength for both cables is >200kN

Because of the optimal guided win-ding, the space on the drum can be used on 7 layers. Due to the proper winding the lifetime of the cable is maximized.

��������������� �������������machine‘s rear frame. We plan and realise the assembly of the winch on your used or new PONSSE For-warder. Available for Wisent, Elk and Buffalo.

The operation is radio remote cont-rolled. The speed and force adjust-ment is continously variable.