hettich innotech ‘visual’ user guide

of 13

Solid Setup Pty Ltd www.solidsetup.com HETINNO User Guide

Hettich InnoTech ‘Visual’ User Guide.

Introduction

Overview

• The ‘Hettich InnoTech Visual Package’ from Solid Setup adds the Hettich InnoTech drawers to Cabinet Vision Solid.

• It provides drilling for the drawer box parts, the cabinet ends and the drawer front for CNC output. • It also adds 3d graphics for the drawer sides, runners, galleries and brackets etc. • The runners and brackets etc are added as a separate parts and materials for reporting purposes. • All material descriptions contain the order number after the # symbol. • The graphics can be turned off per cabinet if having them on causes too much lag on slower computers. • Turning off the graphics does not alter the reports or CNC output.

Included in This Package

Drawer Guide Schedules:

"Hett Inno Anth Qdro 30 Kg" InnoTech Antracite Quadro 30Kg Part‐Extension "Hett Inno Anth Qdro 30 Silent" InnoTech Antracite Quadro 30Kg Silent Part‐Extension "Hett Inno Anth Qdro V6 30 Kg" InnoTech Antracite Quadro V6 30Kg Silent Full‐Extension "Hett Inno Anth Qdro V6+ 50 Kg" InnoTech Antracite Quadro V6+ 50Kg Silent Full‐Extension "Hett Inno Anth Qdro V8 70 Kg" InnoTech Antracite Quadro V8 70Kg Silent Full‐Extension "Hett Inno Silver Qdro 30 Kg" InnoTech Silver Quadro 30Kg Part‐Extension "Hett Inno Silver Qdro 30 Silent" InnoTech Silver Quadro 30Kg Silent Part‐Extension "Hett Inno Silver Qdro V6 30 Kg" InnoTech Silver Quadro V6 30Kg Silent Full‐Extension "Hett Inno Silver Qdro V6+ 50 Kg" InnoTech Silver Quadro V6+ 50Kg Silent Full‐Extension "Hett Inno Silver Qdro V8 70 Kg" InnoTech Silver Quadro V8 70Kg Silent Full‐Extension "Hett Inno SStl Qdro 30 Kg" InnoTech Stainless Steel Quadro 30Kg Part‐Extension

of 13


"Hett Inno SStl Qdro 30 Silent" InnoTech Stainless Steel Quadro 30Kg Silent Part‐Extension "Hett Inno SStl Qdro V6 30 Kg" InnoTech Stainless Steel Quadro V6 30Kg Silent Full‐Extension "Hett Inno SStl Qdro V6+ 50 Kg" InnoTech Stainless Steel Quadro V6+ 50Kg Silent Full‐Extension "Hett Inno SStl Qdro V8 70 Kg" InnoTech Stainless Steel Quadro V8 70Kg Silent Full‐Extension "Hett Inno White Qdro 30 Kg" InnoTech White Quadro 30Kg Part‐Extension "Hett Inno White Qdro 30 Silent" InnoTech White Quadro 30Kg Silent Part‐Extension "Hett Inno White Qdro V6 30 Kg" InnoTech White Quadro V6 30Kg Silent Full‐Extension "Hett Inno White Qdro V6+ 50 Kg" InnoTech White Quadro V6+ 50Kg Silent Full‐Extension "Hett Inno White Qdro V8 70 Kg" InnoTech White Quadro V8 70Kg Silent Full‐Extension

Drawer Guide Materials:

Colour Type Weight Height Depths

White Quadro 30kg 54 n/a n/a n/a n/a 470 n/a n/a White Quadro 30kg 70 n/a n/a 350 420 470 520 n/a White Quadro 30kg 144 n/a n/a 350 420 470 520 n/a White Quadro 30kg 176 n/a n/a 350 420 470 520 n/a White Quadro Silent 30kg 54 n/a n/a n/a n/a 470 n/a n/a White Quadro Silent 30kg 70 260 n/a 350 420 470 520 n/a White Quadro Silent 30kg 144 260 n/a 350 420 470 520 n/a White Quadro Silent 30kg 176 260 n/a 350 420 470 520 n/a White V6 Silent 30kg 54 n/a n/a n/a n/a 470 n/a n/a White V6 Silent 30kg 70 260 300 350 420 470 520 n/a White V6 Silent 30kg 144 260 300 350 420 470 520 n/a White V6 Silent 30kg 176 260 300 350 420 470 520 n/a White V6+ Silent 50kg 54 n/a n/a n/a n/a 470 n/a n/a White V6+ Silent 50kg 70 n/a 300 350 420 470 520 620 White V6+ Silent 50kg 144 n/a 300 350 420 470 520 620 White V6+ Silent 50kg 176 n/a 300 350 420 470 520 620 White V8 Silent 70kg 54 n/a n/a n/a n/a 470 n/a n/a White V8 Silent 70kg 70 n/a n/a n/a n/a 470 520 620 White V8 Silent 70kg 144 n/a n/a n/a n/a 470 520 620 White V8 Silent 70kg 176 n/a n/a n/a n/a 470 520 620 Silver Quadro 30kg 54 n/a n/a n/a n/a 470 n/a n/a Silver Quadro 30kg 70 n/a n/a 350 420 470 520 n/a Silver Quadro 30kg 144 n/a n/a 350 420 470 520 n/a Silver Quadro 30kg 176 n/a n/a 350 420 470 520 n/a Silver Quadro Silent 30kg 54 n/a n/a n/a n/a 470 n/a n/a Silver Quadro Silent 30kg 70 260 n/a 350 420 470 520 n/a Silver Quadro Silent 30kg 144 260 n/a 350 420 470 520 n/a Silver Quadro Silent 30kg 176 260 n/a 350 420 470 520 n/a Silver V6 Silent 30kg 54 n/a n/a n/a n/a 470 n/a n/a Silver V6 Silent 30kg 70 260 300 350 420 470 520 n/a Silver V6 Silent 30kg 144 260 300 350 420 470 520 n/a Silver V6 Silent 30kg 176 260 300 350 420 470 520 n/a Silver V6+ Silent 50kg 54 n/a n/a n/a n/a 470 n/a n/a Silver V6+ Silent 50kg 70 n/a 300 350 420 470 520 620 Silver V6+ Silent 50kg 144 n/a 300 350 420 470 520 620 Silver V6+ Silent 50kg 176 n/a 300 350 420 470 520 620 Silver V8 Silent 70kg 54 n/a n/a n/a n/a 470 n/a n/a Silver V8 Silent 70kg 70 n/a n/a n/a n/a 470 520 620

of 13


Silver V8 Silent 70kg 144 n/a n/a n/a n/a 470 520 620 Silver V8 Silent 70kg 176 n/a n/a n/a n/a 470 520 620 Stainless Quadro 30kg 70 n/a n/a 350 420 470 520 n/a Stainless Quadro 30kg 144 n/a n/a 350 420 470 520 n/a Stainless Quadro 30kg 176 n/a n/a 350 420 470 520 n/a Stainless Quadro Silent 30kg 70 260 n/a 350 420 470 520 n/a Stainless Quadro Silent 30kg 144 260 n/a 350 420 470 520 n/a Stainless Quadro Silent 30kg 176 260 n/a 350 420 470 520 n/a Stainless V6 Silent 30kg 70 260 n/a 350 420 470 520 n/a Stainless V6 Silent 30kg 144 260 n/a 350 420 470 520 n/a Stainless V6 Silent 30kg 176 260 n/a 350 420 470 520 n/a Stainless V6+ Silent 50kg 70 n/a n/a 350 420 470 520 620 Stainless V6+ Silent 50kg 144 n/a n/a 350 420 470 520 620 Stainless V6+ Silent 50kg 176 n/a n/a 350 420 470 520 620 Stainless V8 Silent 70kg 70 n/a n/a n/a n/a 470 520 620 Stainless V8 Silent 70kg 144 n/a n/a n/a n/a 470 520 620 Stainless V8 Silent 70kg 176 n/a n/a n/a n/a 470 520 620 Anthracite Quadro 30kg 54 n/a n/a n/a n/a 470 n/a n/a Anthracite Quadro 30kg 70 n/a n/a 350 420 470 520 n/a Anthracite Quadro 30kg 144 n/a n/a 350 420 470 520 n/a Anthracite Quadro 30kg 176 n/a n/a 350 420 470 520 n/a Anthracite Quadro Silent 30kg 54 n/a n/a n/a n/a 470 n/a n/a Anthracite Quadro Silent 30kg 70 260 n/a 350 420 470 520 n/a Anthracite Quadro Silent 30kg 144 260 n/a 350 420 470 520 n/a Anthracite Quadro Silent 30kg 176 260 n/a 350 420 470 520 n/a Anthracite V6 Silent 30kg 54 n/a n/a n/a n/a 470 n/a n/a Anthracite V6 Silent 30kg 70 260 300 350 420 470 520 n/a Anthracite V6 Silent 30kg 144 260 300 350 420 470 520 n/a Anthracite V6 Silent 30kg 176 260 300 350 420 470 520 n/a Anthracite V6+ Silent 50kg 54 n/a n/a n/a n/a 470 n/a n/a Anthracite V6+ Silent 50kg 70 n/a 300 350 420 470 520 620 Anthracite V6+ Silent 50kg 144 n/a 300 350 420 470 520 620 Anthracite V6+ Silent 50kg 176 n/a 300 350 420 470 520 620 Anthracite V8 Silent 70kg 54 n/a n/a n/a n/a 470 n/a n/a Anthracite V8 Silent 70kg 70 n/a n/a n/a n/a 470 520 620 Anthracite V8 Silent 70kg 144 n/a n/a n/a n/a 470 520 620 Anthracite V8 Silent 70kg 176 n/a n/a n/a n/a 470 520 620

User Created Standards

The Following UCS’s are provided (ensure they are in this order once installed): • { DRAWS } ‐‐ Attribute Detailed Adds the “Draws Detailed?” attribute to the cabinet Note The above UCS’s must always be before any drawer UCS’s, including any from our other drawer packages. The following UCS’s must also be in the order displayed here.

• { DRAWS } ‐‐ Hettich Inno ID's Identifies InnoTech drawer guide materials. • { DRAWS } ‐‐ Hettich Inno Attributes Adds the “Boxsides?” and “Inner Handle?” Attributes to the drawer backs. • { DRAWS } ‐‐ Hettich Inno Hole Masking Configures the Drilling values. • { DRAWS } ‐‐ Hettich Inno Runners Adds the drawer profiles and drawer guides • { DRAWS } ‐‐ Hettich Inno Steel Backs Adds the Steel Drawer Backs • { DRAWS } ‐‐ Hettich Inno Brackets Adds the drawer front brackets

of 13


• { DRAWS } ‐‐ Hettich Inno Galleries Adds the galleries and Top Sides etc • { DRAWS } ‐‐ Hettich Inno Rollout Adds the rollout metal or glass front, and cross gallery • { DRAWS } ‐‐ Hettich Inno Bottoms Adjusts the Bottom sizes for Steel Backs

• { DRAWS } ‐‐ Move Runner Holes 2mm Adjusts the drawer guide mounting holes to match the drawer front outset.

Drawer Boxes

The Following drawer box and Rollout constructions are provided:

• Hettich InnoTech Drawer • Hettich InnoTech Int Adv (Advanced Rollout) • Hettich InnoTech Int Excl (Exclusive Rollout)

Library

• CVS Hettich.cvc Cabinet Vision Catalog of Hettich Library parts

Room Attributes

The Following system attributes are provided:

• S_Room_DFront_Screwon “Draw Front Screwon”

InnoTech Usage

Menu Selections for a Job or Room.

To use the InnoTech drawers in a job you must make the following selections: • In the job or room properties the Cabinet Construction tab should have the Drawer Box set to “Hettich

InnoTech Drawer” and the Roll Outs set to “Hettich InnoTech Int Adv” for advanced inner drawers or “Hettich InnoTech Int Excl” for Exclusive inner drawers as shown here:

• In the Hardware tab, choose one of the Hettich InnoTech guide schedules:

of 13


• In the Materials tab, you can choose any of the Drawer Box or Roll Out schedules you have set up for other drawers as long as the materials selected are suitable for Hettich InnoTech.

• Or for Steel backed drawers choose “Inno Steel Backs”:

• The drawer bottom material will change to our “Hettich Innotech Grey” panel stock material. • For the Steel backs to activate, the drawer is restricted to set widths or else the backs will revert to the

aluminium extrusion which needs to be cut to the size given on your cutting list. • If a steel back is active, the back brackets will be removed • If an aluminium back is used instead, the back brackets will re‐appear. • The Aluminium extrusion is not available for 176 high drawers or in anthracite for 70 high drawers • The steel backs are available for cabinet widths of 300,350,400,450,500,600,700,800,900,1000,1200 except for

the following exceptions: • For all 176 high drawers, there is no 700 wide steel backs • For White drawers there is no 176 high steel backs. • Also for White drawers there are no 300 or 350 or 700 or 1000 or 1200 wide steel backs. • If you have chosen a size where there is no steel back or aluminium extrusion available, the drawer back will

revert to our “Hettich Innotech Grey” panel stock material to match the drawer bottom, and the back brackets will re‐appear

Menu Selections for a Cabinet.

To use InnoTech drawers in a cabinet when InnoTech has not been selected in the room or job the Construction, Materials and Hardware tabs for the cabinet in question must be set to the same selections as above. • To access those menus for one cabinet, take the cabinet into the cabinet editor, click on the section view, and

select the Properties tab to find the menus. • The Cabinet Construction tab should have the Drawer Box set to “Hettich InnoTech Drawer” and the Roll Outs

set to “Hettich InnoTech Int Adv” for advanced inner drawers or “Hettich InnoTech Int Excl” for Exclusive inner drawers as shown here:

of 13


• In the Hardware tab, choose one of the Hettich InnoTech guide schedules.

• In the Materials tab, you can choose any of the Drawer Box or Roll Out schedules you have set up for other drawers as long as the materials selected are suitable for Hettich InnoTech.

• Or for Steel backed drawers choose “Inno Steel Backs”: (explained above)

Menu Selections for one Drawer/Rollout.

To use InnoTech drawers for one drawer/rollout when InnoTech has not been selected in the cabinet, or you wish to use a InnoTech drawer/rollout from a different drawer guide schedule. • Take the cabinet into the cabinet editor, click on the section view, and double click on the drawer/rollout to

bring up its Properties menu, and then select the Drawer Box or Rollout Tray tab. • The Construction tab should be set to “Hettich InnoTech Drawer” or “Hettich InnoTech Int …….” if it is not

already. • To Change to a different guide type press the “change” button shown here:

• Use the “Search” tab and a keyword to quickly find the guide you want rather than paging through materials.. • Here are some keyword examples:

• “innotech ant” = InnoTech Anthracite • “innotech sil” = InnoTech Silver • “innotech ss” = InnoTech Stainless • “innotech wte” = InnoTech White • “innotech wte q” = InnoTech White quadro or quadro silent • “innotech wte v6” = InnoTech White V6 and V6+ • “innotech wte v6+” = InnoTech White V6+ only • “innotech wte v8 0” = InnoTech White V8 070 high only etc etc

Drawer Box Banding Setup

• For the drawer box backs and roll out sides to be banded correctly the selected material schedule for “Drawer Box” and “Roll Out” must have a suitable edge banding material selected and the “Apply Banding To Box Parts” must be ticked as shown here: (Note that the tick boxes only become active if the Drawer Box Banding material is selected first as shown)

of 13


• The material schedules can be edited from the splash screen under the “Main” tab

Drawer Boxes

Drawer Box Height Control

When a drawer is first added to a cabinet, Cabinet Vision will always choose the tallest drawer that will fit from the drawer guide schedule, based on the available space. • The space is determined by the distance between any cabinet or internal parts directly behind the drawer

front, minus the drawer guide material top and bottom clearances. • To select a smaller drawer height, click on the drawer front in the section view. • Increase the “Top Clearance” in the sidebar until the drawer height you require appears, like this:

• NOTE: If you are using a drawer leveling UCS (which moves the top drawer boxes up to match the bottom lip reference of the bottom drawer), this may cause those drawer boxes to interfere with an object above them, whether it be the next drawer front, the cabinets top or top stretcher or a drawer stretcher or some other part which would normally not be in the way.

• This occurs because the leveling UCS is applied after the drawer height selection has been calculated. • To prevent this always check every drawer in the cabinet editor, (preferably with the graphics turned on so you

can clearly see any part interference), and reduce the drawer box height using the “Top Clearance” as described above.

Drawer Box Depth Control

When a drawer is first added to a cabinet, Cabinet Vision will always choose the deepest drawer that will fit from the drawer guide schedule, based on the available space.

of 13


• To select a smaller drawer box depth, click on the drawer front in the section view. • Choose the “Box Depth” from the dropdown list in the sidebar as shown here:

Rollouts

Rollout Height Control

• To add a rollout in the section interior view of the cabinet editor, add a “Split Horz” and then select it and

change it to a “Rollout Tray” in the left sidebar. Or use the “Split Multi Horz” function and choose the “Roll‐out Tray” button and then press OK.

• In version 5, when a rollout is first added to a cabinet, Cabinet Vision will choose the height of the default drawer guide material set in the material schedule which we have set to the 90mm height rollout.

• In version 6 or later, when a rollout is first added to a cabinet, Cabinet Vision will choose the height based on the tallest rollout that will fit from the drawer guide schedule, based on the available space.

• To select a different rollout height, click on the rollout in the section interior view and use the sidebar. • In Version 6 or later choose the height from the dropdown box provided as shown here:

c

• In Version 5 type in the heights listed here to select the height: 1. 81.5mm will select a 90mm High rollout 2. 160mm will select a 144 High rollout

• NOTE: The actual heights of the inner drawer are slightly more than the above measurements due to the taller

front brackets etc. This may cause the inner drawers to interfere with each other or another cabinet part.

of 13


• To prevent this always check every rollout in the cabinet editor, (preferably with the graphics turned on so you can clearly see any part interference), and reduce the rollout box height using the method described above.

• The actual overall heights of the rollouts from top of bracket to bottom of guide, are as follows: 1. For the 90 High rollout: Q30 = 109 Q30s = 110 V6 = 112 V6+ = 117 V8 = 122.5 2. For the 144 High Rollout: Q30 = 179 Q30s = 180 V6 = 182 V6+ = 187 V8 = 192.5

Rollout Depth Control

• When a rollout is first added to a cabinet, Cabinet Vision will always choose the deepest rollout that will fit from the drawer guide schedule, based on the available space.

• To select a smaller rollout depth, click on the rollout in the section interior view. • Increase the negative “Depth” adjustment in the sidebar until the size required is selected, as shown here:

Rollout Setback

• We have provided a UCS which handles the rollout setback. • It adds an attribute to the rollout back which is accessed by clicking on the part in an orthographic (smiley

face) view of the cabinet editor and appears in the sidebar on the left.

• By default the rollout setback is set to 9mm. This means it is setback 9mm further than a drawer would be. • This is enough for the front brackets of the rollout drawer to clear the door. (when a rollout is first added, the

cabinet may need “waking up” for the default setback to activate) • (To “Wake Up” a cabinet go back to the room, click on the cabinet and press “Enter” on your keyboard.) • If you need to change the setback simply type in a new value (which is instant and does not require a “wake

up”) • To change the default for all future drawers Refer to the “Drilling Setup” section below

• Note: In version 6 and later, there is a new “Set Back” setting under “Adjustments”, in the section view. • It can also be used to push the rollouts back into the cabinet.

of 13


• Unfortunately it has no default (it is initially set to zero when a rollout is added to a cabinet) and therefore requires every rollout added to be setback by the user.

• If you are happy to use the new feature you can simply switch off our rollout setback UCS. • If you prefer to keep using our UCS then just ignore the new Set Back adjustment in the section view. • (Please note that if you use both features together, the values from both will be added together for the

setback.)

Turning off the Graphics

Cabinet Attribute

On any cabinet containing a drawer or a rollout there will be an attribute called “Draws Detailed?” This attribute allows you to turn the 3D graphics on or off for the drawer box parts.

• This is because having the graphics turned on can cause too much lag on slower computers. • Turning off the graphics does not alter the reports or CNC output.

Drawer Fronts Screwon

Room Attribute

The “Draw Front Screwon” is a Room attribute which will change all the drawer front mounting holes to screw holes and change the front bracket material to the screw mount bracket for reports and ordering purposes.

of 13


Drilling Setup

UCS Public Variables

There are 11 Public Variables in the “{ DRAWS } ‐‐ Hettich Inno Attributes “ UCS.

• To change these variables go to the Utilities – Edit User Created Standards from the Room Plan or Elevation views

• Then click on the “{ DRAWS } ‐‐ Hettich Inno Attributes” UCS. • On the top right hand side of the screen you will see the Public Variables list:

Each set of holes has a diameter and depth value. Box Bottom = Holes in the Drawer box or Rollout bottom for the drawer side profiles. Front Knockin = Holes in the Drawer Front for drawer side brackets if Room Attribute “Draw Front Screwon” is False. Front Screwon = Holes in the Drawer Front for drawer side brackets if Room Attribute “Draw Front Screwon” is True. Guide Cabinet = Holes in the Cabinet for the Drawer or Rollout Guides. Box Back = Holes in the Drawer box or Rollout back for the drawer side profiles. Rollout Setback = The default rollout setback amount.

• If youre system is set to mm, Edit the values in the Imp() brackets to the diameter and depths you require. • If youre system is set to inches, simply replace the whole imp() with the imperial measurement instead. • Eg: Imp(3) might become 1/8

Note: To turn off any of the holes if not required, like the box bottom holes for example, set the depth to zero. Once you have changed these values to your requirements, you can close the UCS editor.

Tools Required

• The drill diameters you choose in the UCS Public Variables above are all required for this package to work. You must have these tool diameters in your tool catalog and in your machine.

of 13


Drilling Vertical Position

The vertical position of the Innotech drawers in Cabinet Vision, like all drawer systems, is determined by the “Bottom Clearance” of the drawer guide material. For the bottom drawer, this is the distance from the top of the cabinet base or deck, to the bottom edge of the drawer bottom itself. So the distance to the bottom row of drawer guide holes in the cabinet ends is the thickness of the cabinet deck, plus the drawer guide bottom clearance, plus the “Mounting Screw Center To Box Bottom” setting of the drawer guide material which is 25mm for all Innotech guides. The following 4 diagrams show the distances for each guide type: 52mm = 16+11+25 54mm = 16+13+25 60mm = 16+19+25 65mm = 16+24+25 Quadro 30 or Quadro 30 Silent Quadro V6 Silent Quadro V6+ Silent Quadro V8 Silent

BLUEMAX MACHINE:

You may be using a Bluemax machine to drill your drawer fronts if you are buying them from elsewhere, rather than nesting them yourself from Cabinet Vision. If that is the case, you may need to set the bottom clearance to 19 for the Q30 , Q30 Silent and V6 drawers to match the V6+ setting. Check with your local hardware supplier to be sure. This can be done in the section view of the cabinet editor for each drawer as required. The V6+ and V8 drawers can be left as is.

Package Exclusions Some of the drawer drilling shown in various images contained in this document are not included in the Hettich InnoTech Visual Package, but come from other packages which are sold separately as listed here:

• DRFCAM Drawer Front Cam. Cams the drawer box bottom into the drawer front. • DRFMRK Drawer Front Marker. Drills a 5mmx2mm marker under the front brackets top left hole to

help identify the top and bottom of the drawer front during assembly. • DRBMRK Drawer Back Marker. Drills a 5mmx2mm marker in the top of the back face of the drawer

box back to help identify the top and bottom of the drawer back during banding and assembly. • DRSCRW Screw Drawer Boxes Together. Uses intellijoints to screw together edges of the drawer box

parts which are not available in the drawer/rollout wizard. Any other items shown in any images such as cabinet screw holes, benchtop brackets, plastic legs etc are also part of our other packages which are sold separately. See our website for more detailed information on these packages.

of 13


hettich innotech ‘visual’ user guide

Documents