high bearing capacity d400 - f900 · 2018. 8. 30. · high bearing capacity. with the homogeneous...
TRANSCRIPT
Drainage systems
SL-BLOCK MONOLITHIC HEAVY-DUTY CHANNELS
High bearing capacity D400 - F900
2
You can count on our material!
Polymer concrete is a plastic resin-based material with the following outstanding properties: It has low porosity, is impermeable to water and characterised by its high strength and low weight and also has excellent resistance to weather and temperature influences.
The drainage system in monolithic construction
The SL-Block is a drainage system in which both the channel and cover are manufactured in a single casting. The SL-Block is produced homogeneously in polymer concrete. This base material provides maximum bearing capacity and long-lasting durability. In addition, the material's low weight makes the SL-Block easy to install. The SL-Block also conforms to all load classes of DIN EN 1433. The system is suitable for LAU systems, with approval by DIBt (Approval no. Z-74.4-102).
SL-BLOCK MONOLITHIC HEAVY-DUTY CHANNELS
The advantages at a glance
Everything from a single castingThe monolithic construction guarantees the advantage that there are no adhesive bonds or small parts. That also means none of the parts can loosen!
High bearing capacityWith the homogeneous casting, the systems also offer an extremely high bearing capacity. Polymer concrete is a permanently durable and sustainable material.
Low weightPolymer concrete products have a substantially lower weight than equivalent concrete products. This saves costs during transport and installation.
Easy to cleanWith the special formation of the bed, the self-cleaning effect of the channel is increased and the load-bearing capacity of the channel body is improved.
Resistant to frost, road salt and chemicalsPolymer concrete is water-resistant based on its plastic resin components and thus has proven resistance to frost, road salt and chemicals.
3
SL-BLOCK MONOLITHIC HEAVY-DUTY CHANNELS
Overview of contents Page
SL-Block NW 100, H = 240 mm 4SL-Block NW 100 accessories 5SL-Block NW 200, H = 320 mm 6SL-Block NW 320 accessories 9
Example construction products:
• German Federal Motorway A7 – Langenfelder Bridge
• Hellange motorway section, Luxembourg
• German Federal Motorway A7 – Seesen-Bockenem junction
• German Federal Motorway AB A10 – Nuthetal interchange to Potsdam interchange
4
SL-BLOCK MONOLITHIC HEAVY-DUTY CHANNELS
Heavy-duty channel SL-Block NW 100made of polymer concrete, in accordance with DIN EN1433 / DIN V19580.
Inlet box SL-Block NW 100made of polymer concrete with casing and cast grating GGG, in accordance with DIN EN1433 / DIN V19580 with edge guard (7 mm), with integrated sludge trap.
With pipe connection DN / OD 110 or 160 LLDLoad class F900
With cast PE-HD pipe port DN / OD 110 or 160Load class F900
Installation length
Installation width
Installation height
Nominal width
50 cm 14.8 cm 58.5 cm 100
Installation length
Installation width
Installation height
Nominal width
50 cm 14.8 cm 58.5 cm 100
Inspection element SL-Block NW 100made of polymer concrete, including cast grating, in accordance with DIN EN1433 / DIN V19580.
With knock-out section DN / OD 110Load class F900
Load class F900
With pipe connection DN / OD 110Load class F900
With cast PE-HD pipe port DN / OD 110Load class F900
Installation length
Installation width
Installation height
Nominal width
50 cm 14.8 cm 24 cm 100
Installation length
Installation width
Installation height
Nominal width
50 cm 14.8 cm 24 cm 100
Installation length
Installation width
Installation height
Nominal width
50 cm 14.8 cm 24 cm 100
Installation length
Installation width
Installation height
Nominal width
100 cm 14.8 cm 24 cm 100
5
SL-BLOCK MONOLITHIC HEAVY-DUTY CHANNELS
Flow direction change SL-Block NW 100
PVC pipe port DN / OD 110
PVC pipe port DN / OD 160
PVC odour trap DN / OD 160
Heavy-duty channel accessories Monolithic SL-Block NW 100
Combination end wall SL-Block NW 100for channel beginning and end
End wall SL-Block NW 100 for channel end, with integrated lip labyrinth seal for connection DN / OD 110
End wall SL-Block NW 100for channel end with PE-HD pipe port DN / OD 110
Installation width Installation height Nominal width
14.8 cm 24 cm 100
Installation width Installation height Nominal width
14.8 cm 24 cm 100
Installation width Installation height Nominal width
14.8 cm 24 cm 100
6
SL-BLOCK MONOLITHIC HEAVY-DUTY CHANNELS
Heavy-duty channel SL-Block NW 200made of polymer concrete, in accordance with DIN EN1433 / DIN V19580, with general building approval Z-74.4-69
Installation length
Installation width
Installation height
Nominal width
100 cm 26 cm 32 cm 200200 cm 26 cm 32 cm 200
Load class F900
Inspection element SL-Block NW 200made of polymer concrete, including cast grating, in accordance with DIN EN1433 / DIN V19580
With knock-out section DN / OD 160Load class F900
With pipe connection DN / OD 160Load class F900
Installation length
Installation width
Installation height
Nominal width
65 cm 26 cm 24 cm 200
Installation length
Installation width
Installation height
Nominal width
65 cm 26 cm 24 cm 200
Inlet box SL-Block NW 200made of polymer concrete, in accordance with DIN EN1433 / DIN V19580, Connection options: DN100 / DN150 / DN200 / DN300, with general building approval Z-74.4-69.
Upper section, load class F900
Lower section, load class F900
Installation length
Installation width
Installation height
Nominal width
65 cm 26 cm 32 cm 200
Installation length
Installation width
Installation height
Nominal width
50 cm – – 200
7
SL-BLOCK MONOLITHIC HEAVY-DUTY CHANNELS
Heavy-duty channel SL-Block NW 200made of polymer concrete, in accordance with DIN EN1433 / DIN V19580, with integrated EPDM profile seal
Installation length
Installation width
Installation height
Nominal width
100 cm 26 cm 32 cm 200200 cm 26 cm 32 cm 200
Inspection element SL-Block NW 200made of polymer concrete, including cast grating, in accordance with DIN EN1433 / DIN V19580
With knock-out section DN / OD 160Load class F900
With pipe connection DN / OD 160Load class F900
Installation length
Installation width
Installation height
Nominal width
65 cm 26 cm 24 cm 200
Installation length
Installation width
Installation height
Nominal width
65 cm 26 cm 24 cm 200
Inlet box SL-Block NW 200made of polymer concrete, in accordance with DIN EN1433 / DIN V19580, 2-piece, Connection options: DN100 / DN150 / DN200 / DN300 and integrated EPDM profile seal.
Upper section, load class F900
Lower section, load class F900
Installation length
Installation width
Installation height
Nominal width
65 cm 26 cm 32 cm 200
Installation length
Installation width
Installation height
Nominal width
50 cm – – 200
8
Heavy-duty channel SL-Block NW 200made of polymer concrete, in accordance with DIN EN1433 / DIN V19580, with integrated EPDM profile seal and side open ing for OPA (customisable opening height).
Installation length
Installation width
Installation height
Nominal width
100 cm 26 cm 32 cm 200200 cm 26 cm 32 cm 200
Load class D400
SL-BLOCK MONOLITHIC HEAVY-DUTY CHANNELS
Inspection element SL-Block NW 200made of polymer concrete, including cast grating, in accordance with DIN EN1433 / DIN V19580
With knock-out section DN / OD 160Load class D400
With pipe connection DN / OD 160Load class D400
Installation length
Installation width
Installation height
Nominal width
65 cm 26 cm 24 cm 200
Installation length
Installation width
Installation height
Nominal width
65 cm 26 cm 24 cm 200
Inlet box SL-Block NW 200made of polymer concrete, in accordance with DIN EN1433 / DIN V19580, 2-piece, Connection options: DN100 / DN150 / DN200 / DN300 and integrated EPDM profile seal
Upper section, load class D400
Lower section, load class D400
Installation length
Installation width
Installation height
Nominal width
65 cm 26 cm 32 cm 200
Installation length
Installation width
Installation height
Nominal width
50 cm – – 200
9
SL-BLOCK MONOLITHIC HEAVY-DUTY CHANNELS
Sludge trap for inlet box
PVC pipe port DN / OD 160
PVC pipe port DN / OD 200
PVC odour trap DN / OD 160
Heavy-duty channel accessories Monolithic SL-Block NW 200
Combination end wall SL-Block NW 200for channel beginning and integrated EPDM profile seal
End wall SL-Block NW 200for channel end with PE-HD pipe port DN / OD 110
End wall channel end SL-Block NW 200with integrated lip labyrinth seal for connection DN / OD 160
Flow direction change SL-Block NW 200with integrated labyrinth seal (2x)
Installation width Installation height Nominal width
26 cm 32 cm 200
Installation width Installation height Nominal width
26 cm 32 cm 200
Installation width Installation height Nominal width
26 cm 32 cm 200
Installation width Installation height Nominal width
26 cm 32 cm 200
10
2
Stoßfuge umlaufend verklebt
A
End walls
Multi-component gully (lower section)Multi-component gully (upper section)
System illustration for installation1 Channel element2 Joint seal system according to
Appendix 23 Connecting seal system4 Foundation made of reinforced concrete
and casing made of reinforced FDE concrete in consideration of DAfStb Directive “Interaction of concrete with substances harmful to water”10 according to structural analysis
5 Base layer6 Protective anti-frost layer
Channel elements
SL-BLOCK MONOLITHIC HEAVY-DUTY CHANNELS
Heavy-duty channel SL-Block NW 100 header for technical drawings
Seal of multiple-component inlet boxSeal the butt joint around the perimeter with a joint sealant for the contact element with a general building approval and / or European technically approved joint sealant.
11
Gully (lower section)
Inlet box with port
Inlet box without port
Heavy-duty channel SL-Block NW 200 header for technical drawings
SL-BLOCK MONOLITHIC HEAVY-DUTY CHANNELS
ww
w.r
iede
lund
eich
ler.d
e
Wiebusch-Polymerbeton-Technik GmbH & Co. KG • Am Stadtbruch 4 • 34471 VolkmarsenFon +49 (0) 5693 7780 • Fax +49 (0) 5693 1489 • [email protected] • www.wipoton.de
Drainage systems
Plastic channelsDrainage channels Standard / Standard C
Pro drainage channelsHeavy-duty channels Komfort SLR
Monolithic SL-Block heavy-duty channelsFacade / slotted channels
Yard drains / shoe cleaners
Personal advice for the best solutions!