high compressive strength insulaon thermal - …€¦ · thermal insulation solutions thermal he...
TRANSCRIPT
Thermal Insulation Solutions
TH
ER
MA
LT
HE
RM
AL
HEHEHE AATHERMTHERMATHERM
CellectaI N N O V A T I O N I N I N S U L A T I O N
High Compressive Strength Insula�on
PART S O L U T I O N SL
CODE FOR SUSTAINABLE HOMES CREDITS
CODE FOR SUSTAINABLE HOMES CREDITS
TH
ER
MA
LT
HE
RM
AL
Domestic, Commercial & Industrial
CellectaI N N O V A T I O N I N I N S U L A T I O N
FLOORFLOOR POOLPOOL ROOFROOF
PERiPERi CHiPCHiP GYPGYP PLYPLY
UNiCLOSERUNiCLOSER
Basements FloorsSwimming PoolsInverted RoofsCar Park DecksCavity Closers
CellectaI N N O V A T I O N I N I N S U L A T I O N
Cellecta is a 9001 & 14001 accredited producer of environmentally friendly high performance thermal and acoustic insulation products. Our products have been supplied to all sectors of the construction industry including: house builders, building contractors, ground workers, screeders, roofers and dryliners.
Cellecta’s team of experienced staff are able to offer unrivalled customer support, from assistance in selecting the most suitable product that satisfies current legislation to delivering the right materials direct to site on time.
The HEXATHERMthermal insulation solutions guide demonstrates proven, cost effective constructions that will satisfy the demanding requirements of Approved Documents L1A, L2A, L1B, L2B (England and Wales) and Section 6 - Energy (Scotland).
The UK’s No.1 for Technical Insulation Products
2TETRiSThe eco-friendly block & beamScreedBoard
For on the go access to Cellecta informa�on including installa�on videos & technical data, download the FREE app for smart phones and tablet devices
www.cellecta.co.uk 08456 71-71-74 [email protected] 08456 71-71-74 [email protected]
For on the go access to Cellecta informa�on including installa�on videos & technical data, download the FREE app for smart phones and tablet devices
Building Regulations & The Codefor Sustainable HomesHEXATHERM product range descriptionsProduct Selectors Applications: Basements Swimming poolsFloorsInverted flat roofsGreen roofsCar park decksCavity closersStandards and Codes of PracticeFurther Information
3
44
789
182223242627
CONTENTS
OzoneDepletion Potential0100%100%
RECYCLABLE
GlobalWarming Potential
<5
Cellecta operates a progressive sustainable environmental policy, with all our insulation products manufactured under ISO 9001 & 14001 management controls, using materials which are recyclable or made from recycled materials.
Cellecta & The EnvironmentThe Environment
ISO 9001 N� 10224
ISO 14001: 2004
BUREAU VERITASCertification
BE 009119-1
HEHEHEHEHEHE ATHERMATHERMATHERMXXXHEHEHEHEHEHE ATHERMATHERMATHERMHEHEHEHEHEHE ATHERMATHERMATHERMHEHEHE AATHERMTHERMATHERM
Category 6 - Pollution Pol 11 Code credit is awarded when all the insulation materials in the elements listed below only use substances that have a global warming potential (GWP) of less than 5: Roofs: including loft hatch Walls: internal and external, including lintels and all insulation
products Floors: including ground and upper floors Hot water cylinders, pipe insulation and other thermal stores Cold water storage tanks
Incorporating Cellecta’s high performance thermal and acoustic insulation products into elements of a dwelling will help reduce the building’s impact on the environment and will enable builders and developers to gain Code for Sustainable Homes (CSH)credits.
Creditscan be gained from four of the nine assessment categories detailed in The Code :
Category 1 - Energy Ene 1 15 Code credits are available for improving the DER over the TER. eg. ground floor U-values improved from
2 20.25W/m K to 0.16W/m K.
Category 3 - Materials Mat 1Adopting a construction listed on the BRE website: www.thegreenguide.org.uk, which incorporates one of Cellecta’s insulation products can result in up to 15 Code credits being awarded.
All plans submitted for Building Control approval in England & Wales are required to comply with each country’s Approved (1)
Document L - Conservation of Fuel and Power in Buildings. To address different types of buildings the document is divided into four sections:L1A New Build - DwellingsL1B New Build - Buildings Other Than DwellingsL2A Existing - DwellingsL2B Existing - Buildings Other Than DwellingsEach document details what is required to comply with Building Regulations.
This technical manual details a multitude of ways Cellecta’s high performance thermal insulation can provide exceptionally
low U-values and resolve areas of thermal bridging with low Y-value ( construction, which in turn will make the building more energy efficient, lowering the amount of CO produced and help to protect the environment for future generations. 2
THE CODE FOR SUSTAINABLE
HOMES
Category 7 - Health and Well-being Hea 2 Incorporating one of Cellecta’s high performance acoustic treatments will also result in points being awarded. Contact our helpful technical team for further information.
Building element specifation
Green Guide rating A+ A B C D E
3 2 1 0.5 0.25 0Code credits awarded
Category 3 - Materials Mat 2 Insulation materials, fixings and adhesives and additives are excluded from the Mat 2 assessment.
(1) For Scotland, the requirements are set out in Section 6 - Energy, of the Scottish Building Standards.
2010
edi
tion
2010
edi
tion
2010
edi
tion
2010
edi
tion
Note. Mat 1 credits have an approximate weighted value of 0.3
Pol 1
Note. Pol.1 Code credits have an approximate weighted value of 0.7
Examples of credits gained using Cellecta products
Element description
Chipboard (P5) decking on insulation, on grouted beam and aircrete block flooring.e.g XCHiP (chipboard/ thermal laminate) laid on beam and aircrete block suspended ground floor
Structural concrete on beam and extruded polystyrene block flooring e.g TETRiS (insulation blocks) and pre-stressed concrete beam suspended ground floor covered with 75mm concrete.
Screed on insulation laid on grouted beam and aircrete block flooring. e.g XFLOOR 250 installed on beam and aircrete block suspended ground floor and covered with screed
Green Guide rating
A+
A+
B
Element number
820140019
820140051
820140014
3
Code credits
3
1
Building Regulations
(A)The Code For Sustainable Homes
FREE Services offered by Cellecta: Technical and installation advice Site surveys and take-off service U-value, condensation risk and imposed load calculations
<5GWP value
Code credits 1
(A) Only relevant to England and Wales.
Technical Advice 08456 71-71-74 www.cellecta.co.uk3
CellectaR
HeavyUULow
Super low U-valuesachievable
Ultra high compressive Strength
GREENBRE
GUIDE
Recognisedconstructions
HEXATHERM
Lightweightboards
HEXATHERM insulation is the ideal insulant for a multitude of domestic, commercial & industrial applications where compressive strength and closed-cell properties are required. All products have excellent life-long thermal performance and very low water absorption, allowing many of them to be installed above or below the dpm. boards are 100% recyclable, have a Global Warming
HEXATHERM(1)Potential of less than 5 , making them fully compliant with Code for Sustainable Homes Pol 1 requirements.
HEHEHEHEHEHE ATHERMATHERMATHERMXXXHEHEHEHEHEHE ATHERMATHERMATHERMHEHEHEHEHEHE ATHERMATHERMATHERMHEHEHE AATHERMTHERMATHERM
High compressive strength, closed-cell structure and low water absorption make XFLOOR boards the ideal insulation for a variety of domestic, commercial & industrial flooring applications.
Designed specifically for swimming pool applications XPOOL insulation boards feature excellent water resistance and ultra high compressive strength.
FLOOR
POOLPOOL
Basement and retaining walls
250
Basement walls and floor
Gound floor
Domestic and commercial floors
Commercial and industrial floorsElement Insulation position
Fixed externally against wall
Floor: below timber, screed or concrete slab
Below concrete floor slab
On the slab, below chipboard (thermal laminate)
Over and between pre-stressed concrete floor beams
On slab, below ScreedBoard
On slab, below screed
Fixed to underside of soffit
On slab, below screed
On beam and block floor
(page 7)(page 7)
(page 9)(page 9)(page 9)
(page 10)(page 10)(page 10)
(page 11)(page 11)
(page 14)
Fixed externally against retaining wall and under concrete slab
Swimming Pools
Insulation blocks for pre-stressed concrete beams
Chipboard thermal floor laminate
Soffit / car park lining thermal
laminate
XCPLTETRiSTETRiS XCHiPXPERi
(page 7)
(page 12)
(page 14)
(page 17)
Swimming pool slab and walls
(page 8)
300 500
XFLOOR
XPOOL
TETRiS is a revolutionary insulation block and beam flooring system. The “T” profied insulation blocks sit on and between standard pre-stressed concrete floor beams. The insulation is then covered with a concrete topping to produce a finished floor with outstanding thermal and structural performance.
TETRiSTETRiS nsulation floor systemSuspended ground floor
XPERi boards have outstanding compressive strength, high resistance to water absorption and interlocking edge detail, making them the ideal insulation for external applications such as basements and below ground retaining walls.
PERiPERi
insulation floor system
Domestic and commercial floors
(page 14)
(page 16)(page 16)
Industrialfloors
(page 9)
700
Intermediate floors and soffits
CellectaR
(1) Excluding XFLOOR 500 & XPOOL
4
HEXATHERM
Quick deliveries
100%100%Recyclable
THERMALTHERMALPERFORMANCE
WATERWATERRESISTANT
Plywood thermal laminate
Planed & close tolerance
Plasterboard thermal laminate
Internal wall lining (thermal laminate)
Behind curtain walling / cladding
Covered with washed ballast or paving slabs
Covered with planting layer(green roof)
Vertical up-stands
Covered with concrete and paving grade waterproofing
Inverted flat roof
Car park decks and plant room floors
Inverted flatroofs
Inverted roof board with
integral drainage
XPLY XR XGYP 500L300L XDRAIN
(page 18)
(page 23)
(page 21)
Car park deck
Wall
XROOF
Plywood thermal laminate covered with waterproofing
Timber flat roof
Inverted roof vertical up-stands
XMD
(page 20)
Around window and door openings
Fixed externally and covered with render
Element Insulation position Insulated cavity closers
UN CLOSERiX
(page 24)
Technical Advice 08456 71-71-74 www.cellecta.co.uk
UN iCLOSER
XDRAiN closed cell inverted roofboards have a unique pattern of drainage channels on their underside which speeds up the shedding of rainwater from the roof, eliminating the need for an expensive separate drainage mat.
DRA Ni DRA Ni
LAM NATESi LAM NATESi
XLAMINATES combine the benefits of HEXATHERM with a facing board to produce a composite thermal board to suit a specific application:XCHiP Chipboard flooring system XCPL Car park liner/soffit liner XGYP Plasterboard faced thermal lining XPLY Garage wall lining/structural roof deckingXMD Vertical up-stand insulation for inverted roofs
Excellent life long thermal performance, combined with low water absorption and high compressive strength make XROOF boards the ideal insulation for inverted and green roof applications.
ROOFROOF
Cellecta’s proprietary cavity closers eliminate cold bridging around window and door openingsTwo versions are available, one single rigid DPC profile or two rigid DPC profiles. Both versions of incorporate a HEXATHERM high performance thermal core.
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CADTHE CODE FOR SUSTAINABLE
HOMES
FASTRACKB U I L D I N G I N F O R M AT I O N M O D E L L I N G
BIM
5
CellectaR
High resistanceto water
Life longthermal performance
IntroductionHEXATHERM insulation boards are the ideal insulant for a multitude of flooring and basement applications due to their high compressive strength and closed-cell structure.A variety of grades are available to suit different loading conditions and applications from 250 to 700kPa. All grades have excellent life-long thermal performance and very low water absorption, allowing them to be installed above or below the damp proof membrane.
HEXATHERM boards are 100% recyclable, with a (1)<5 GWP , making them fully compliant with CSH Pol 1
requirements.
Key Benefits of Floor InsulationHEXATHERMBM TRADA Q Mark third party accreditedISO 9001 and 14001 certifiedHigh compressive strength - able to withstand long-term static loads: 250 - 700kPaExcellent life long thermal performanceVery low water absorption: 0.7%
(1)Code for Sustainable Homes Pol.1 compliant Environmentally friendly - 100% recyclable
8m
6m
2m
8m
3m
11mCalculating the thickness of floor insulation requiredTo comply with Building Regulations, each floor’s thermal performance needs to be assessed individually in accordance with EN ISO 13370: 1998. Cellecta offers a free U-value calculation service; simply call 08456 71-71-74 with your specific construction details.
Internal dimensions
Perimeter ( ) = 38LmP2Area ( ) = 82mA
/ ratio = 0.46P A
6Technical Advice 08456 71-71-74 www.cellecta.co.uk
Information required Type of building: Domestic, commercial, industrial or other (specify) Internal dimension of the external perimeter (P) in linear metres
2 Internal area: (A) in m Floor type: solid, suspended, or beam and block Position of insulation Type of block used (beam and block floors only) Thickness and type of floor finish: Screed, concrete, ScreedBoard or timber
Basements, Floors and Swimming Pools
6m
7m
20
m
19m
Internal dimensions
Perimeter ( ) = 82LmP2Area ( ) = 392mA
/ ratio = 0.21P A
2m
7m
Not to scale
(A) Only relevant to England and Wales.(1) Excluding XPOOL & XFLOOR 500
100%100%Recyclable
Global
<5 Warming Potential
Ozone
0 Depletion Potential
CellectaR
Student accommoda�on, Bournemouth
Queen Elizabeth Hospital, Birmingham
Tower Wood Outdoor Educa�on Centre, Windermere
THE CODE FOR SUSTAINABLE
HOMES
RTIFE ICC A TK IORA N
M-Q
BuildingInsula�onProducts
0107
(1)
Cellecta HEXATHERM XPERi insulation installed externally against basement wallCellecta HEXATHERM XFLOOR insulation installed below floating screed
BASEMENT WALLS & FLOOR
Technical Advice 08456 71-71-74 www.cellecta.co.uk
Pol 1
<5
1
HEXATHERMHE AX THERMXPS boards
Mat 1
CellectaR
GWP value
Code credits
oElement N 820100010
Note. Pol.1 Code credits have an approximate weighted value of 0.7 Note. Mat 1 Code credits have an approximate weighted value of 0.3
Closed cell structure
High compressive strength
Very low water absorption
Excellent life-long thermal performance
FLOOR
XPERi & XFLOOR boards have outstanding compressive strength, low water absorp�on and life-long thermal performance, making them the ideal insula�on for basements and below ground applica�ons.
Thermal Conduc�vity EN 12667 (W/mK)
250300
Temperature range
250-
Board size (mm)
Thickness’ (mm)(other sizes manufactured to order)
20
80125
80-
0.7%
-50/+75�C
-50/+75�C
600x 2500
0.7%
600x 2500
XPERi
Long term water absorp�onby immersion EN 12087
25
3040
50 6080
100 120140 160
Edge profileT&G Square
The method of calculating the U-value of a basements is more complex than other applications. To determine the thickness of insulation required contact Cellecta for assistance.T. 08456 71-71-74.E. [email protected]
Fig. 1B
Structure below ground
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
-300
-125
-50/+75�C
0.7%
600x 2500
40
50 6075 80
100 120140 160
CGreen Guide rating
Code credits 0.5
Square
250 300
XFLOOR
0.0330.034
0.033-
<30mm>40mm
Tanking membrane
Retaining wall (To structural engineer’s specification)
Backfill
Geotextile filter layer (optional)
Cellecta HEXATHERM XFLOOR 250 (Domestic/commercial applications)
Cellecta HEXATHERM XFLOOR 300 (Domestic/commercial applications)
Perforated pipe
PERi
<80mm>81mm
<30mm>40mm
30
The following Code for Sustainable Homes credits areobtainable as a result of incorporating HEXATHERM into the construction detailed.
Cellecta HEXATHERM XPERi(Perimiter wall insulation)
B1
7
Strength at 10% compression EN 826 (kPa)
Strength at 2%compression EN 1606 (kPa)
0.0330.034
Product Benefits
Physical Properties
Product Information
Environmental Creden�als
Code for Sustainable Homes
Third Party Accredita�on and Approvals
Typical Thickness of Insulation Required
Accepted
NHBC warranty
Accepted
premierguarantee
LABCAccepted
ISO 9001 N� 10224
ISO 14001: 2004
BUREAU VERITASCertification
BE 009119-1
BuildingInsula�onProducts
0107
100%100%Recyclable
Global
<5 Warming Potential
Ozone
0 Depletion Potential
Cellecta HEXATHERM XPOOL insulation installed below slab and external face of the retaining walls
Technical Advice 08456 71-71-74 www.cellecta.co.uk
CellectaR
POOL
Designed specifically for swimming pool applications XPOOL insulation boards have a ultra high resistance to compression, extremely low water absorption and outstanding thermal performance, providing long term energy savings.
Concrete retaining wall and floor slab (To structural engineer’s specifica�on)
Waterproof render
Backfill
Pool liner or ceramic tiles
Blinding
INDOOR SWIMMING POOLS CellectaR
Closed cell structure
Excellent life-long thermal performance
Very low water absorption
Extra high compressive strength
Shiplap
Thermal Conductivity EN 12667 (W/mK)
Temperature range
500
Board size (mm)
180
-50/+75oC
0.7%
600x 1250
Long term water absorptionby immersion EN 12087
Edge profile
XPOOL
0.25 0.22 0.20 0.18 0.16
0.3
0.4
0.5
0.6
0.7
P/Aratio
2U-value (W/m K)Calculated in accordance with ISO 13370
0.14 0.12 0.10
Thickness’ (mm)(other sizes manufactured to order)
Cellecta HEXATHERM XPOOL (Swimming pool insulation)
8
Sp1
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
50 6080
100 120140 160
75
Strength at 10% compressionEN 826 (kPa)
Strength at 2% compressionEN 1606 (kPa)
Mat 1oElement N 820100010
Note. Mat 1 Code credits have an approximate weighted value of 0.3
CGreen Guide rating
Code credits 0.5
The following Code for Sustainable Homes credits areobtainable as a result of incorporating HEXATHERM into the construction detailed.
100%100%Recyclable
Ozone
0 Depletion Potential
0.035
HEXATHERM XPOOL (mm)
Product Benefits
Physical Properties
Product Information
Environmental Creden�als
Code for Sustainable Homes
Third Party Accredita�on and Approvals
Typical Thickness of Insulation Required
60 75 90 110 130
75 100 100 120 140
75 100 110 130 150
80 110 120 140 160
100 110 125 150 165
150 200
160 210
180 220
190 230
190 230
250
260
270
280
280
Accepted
NHBC warranty
Accepted
premierguarantee
LABCAccepted
ISO 9001 N� 10224
ISO 14001: 2004
BUREAU VERITASCertification
BE 009119-1
BuildingInsula�onProducts
0107
GROUND BEARING CONCRETE FLOOR SLAB
Technical Advice 08456 71-71-74 www.cellecta.co.uk
CellectaR
Closed cell structure
High compressive strength
Very low water absorption
Excellent life-long thermal performance
FLOOR
XFLOOR extruded polystyrene thermal insula�on boards are designed specifically for domes�c, commercial and industrial flooring applica�ons where a high resistance to compression and water absorp�on is required.
Square Square Shiplap Shiplap
Thermal Conduc�vity EN 12667 (W/mK)
250kPa
Temperature range
300kPa
500kPa
700kPa
Board size (mm)
Thickness’ (mm)(other sizes manufactured to order)
20
80kPa
125kPa
180kPa
250kPa
0.7%
-50/+75�C
-50/+75�C
-50/+75�C
-50/+75�C
600x 2500
0.7% 0.7% 0.7%
600x 2500
600x 1250
600x 1250
250 300 500 700
Long term water absorp�onby immersion EN 12087
0.033-
0.0330.034
0.0350.0340.036
<80mm>81mm
25
30 40
50 6075 80
100 120140 160
50 6075 80
100 120
50 6080
100 120140 160
Edge profile
Cell HEXATHERM XFLOOR insulation installed below the concrete slabecta
Blinding
Cellecta HEXATHERM XFLOOR 250 (Domestic/commercial applications)
Cellecta HEXATHERM XFLOOR 300 (Domestic/commercial applications)
Cellecta HEXATHERM XFLOOR 500 (Commercial/industrial applications)
Cellecta HEXATHERMXFLOOR 700 (Industrial applications)
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
Min150mm
XFLOOR
Concrete slab (To structural engineer’s specification)
Damp proof membrane (DPM)(Can be installed above or below the insulation)
140 160
Gf1
9
0.25 0.22 0.20 0.18 0.16
0.3
0.4
0.5
0.6
0.7
P/Aratio
2U-value (W/m K)Calculated in accordance with ISO 13370
0.14 0.12 0.10
Strength at 10% compressionEN 826 (kPa)
Strength at 2% compressionEN 1606 (kPa)
(1) Excluding XFLOOR 500
Pol 1
<5
1
Mat 1
GWP value
Code credits
oElement N 820100010
Note. Pol.1 Code credits have an approximate weighted value of 0.7 Note. Mat 1 Code credits have an approximate weighted value of 0.3
CGreen Guide rating
Code credits 0.5
The following Code for Sustainable Homes credits areobtainable as a result of incorporating HEXATHERM into the construction detailed.
HEXATHERMHE AX THERMXPS boards (1)
(2) Excluding XFLOOR 700
(1)
HEXATHERM XFLOOR 300 (mm)
Product Benefits
Physical Properties
Product Information
Environmental Creden�als
Code for Sustainable Homes
Third Party Accredita�on and Approvals
Typical Thickness of Insulation Required
60 75 90 110 130
75 100 100 120 140
75 100 110 130 150
80 110 120 140 160
100 110 125 150 165
150 200
160 210
180 220
190 230
190 230
250
260
270
280
280
Accepted
NHBC warranty
Accepted
premierguarantee
LABCAccepted
ISO 9001 N� 10224
ISO 14001: 2004
BUREAU VERITASCertification
BE 009119-1
BuildingInsula�onProducts
0107
(2)
100%100%Recyclable
Global
<5 Warming Potential
Ozone
0 Depletion Potential
Min150mm
Cellecta HEXATHERM XFLOOR insulation installed below floating screedScreed incorporating optional underfloor heating system
GROUND BEARING CONCRETE FLOOR SLAB
Technical Advice 08456 71-71-74 www.cellecta.co.uk
CellectaR
Closed cell structure
High compressive strength
Very low water absorption
Excellent life-long thermal performance
FLOOR
XFLOOR extruded polystyrene thermal insula�on boards are designed specifically for domes�c, commercial and industrial flooring applica�ons where a high resistance to compression and water absorp�on is required.
Square Square Shiplap
Thermal Conductivity EN 12667 (W/mK)
250kPa
Temperature range
300kPa
500kPa
Board size (mm)
Thickness’ (mm)(other sizes manufactured to order)
20
80kPa
125kPa
180kPa
0.7%
600x 2500
0.7% 0.7%
600x 2500
600x 1250
Long term water absorptionby immersion EN 12087
<80mm>81mm
25
30 40
50 6075 80
100 120140 160
50 6075 80
100 120
Edge profile
XFLOOR
250 300 500
Concrete slab (To structural engineer’s specification)
Sand/cement or anyhydrite screed
Under floor heating pipes secured to insulationwith proprietary clips (optional)
0.033-
0.0330.034
0.035
140
Damp proof membrane (DPM)(can be installed above or below the insulation)
-50/+75�C
-50/+75�C
-50/+75�C
Gf2
10
0.25 0.22 0.20 0.18 0.16
0.3
0.4
0.5
0.6
0.7
P/Aratio
2U-value (W/m K)Calculated in accordance with ISO 13370
0.14 0.12 0.10
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
Strength at 10% compressionEN 826 (kPa)
Strength at 2% compressionEN 1606 (kPa)
HEXATHERM XFLOOR 300 (mm)
Pol 1
<5
1
Mat 1
GWP value
Code credits
oElement N 820100034
Note. Pol.1 Code credits have an approximate weighted value of 0.7 Note. Mat 1 Code credits have an approximate weighted value of 0.3
DGreen Guide rating
Code credits 0.25
The following Code for Sustainable Homes credits areobtainable as a result of incorporating HEXATHERM into the construction detailed.
HEXATHERMHE AX THERMXPS boards (1)
(1) Excluding XFLOOR 500
Cellecta HEXATHERM XFLOOR 250 (Domestic/commercial applications)
Cellecta HEXATHERM XFLOOR 300 (Domestic/commercial applications)
Cellecta HEXATHERM XFLOOR 500 (Commercial/industrial applications)
Product Benefits
Physical Properties
Product Information
Environmental Creden�als
Code for Sustainable Homes
Third Party Accredita�on and Approvals
Typical Thickness of Insulation Required
60 75 90 110 130
75 100 100 120 140
75 100 110 130 150
80 110 120 140 160
100 110 125 150 165
150 200
160 210
180 220
190 230
190 230
250
260
270
280
280
160
Accepted
NHBC warranty
Accepted
premierguarantee
LABCAccepted
ISO 9001 N� 10224
ISO 14001: 2004
BUREAU VERITASCertification
BE 009119-1
BuildingInsula�onProducts
0107
100%100%Recyclable
Global
<5 Warming Potential
Ozone
0 Depletion Potential
(1)
Cell Cellecta ecta ScreedBoard 20 installed on routed HEXATHERM XFLOOR 250/300 incorporating underfloor heating system
GROUND BEARING CONCRETE FLOOR SLAB
Technical Advice 08456 71-71-74 www.cellecta.co.uk
CellectaR
High compressive strength
Closed cell structure, ideal for routing
Excellent life-long thermal performance
FLOOR
Thermal Conduc�vity EN 12667 (W/mK)
Temperature range
Thickness’ (mm)(other sizes manufactured to order)
20 25 30
-50/+75�C
-50/+75�C
250 300XFLOOR
0.033-
0.0330.034
Damp proof membrane (DPM)(Can be installed above or below the insulation)
Concrete floor slab (To structural engineer’s specification)
Cellecta YELOfon ES5(Thermal and expansion gap strip installed around floor perimeterThickness: 5mmRoll size: 100mm, 120mm or 150mm high x 50m long )
Gf3
11
Pol 1
<5
1
GWP value
Code credits
Note. Pol.1 Code credits have an approximate weighted value of 0.7
HEXATHERMHE AX THERMXPS boards
<80mm>81mm
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
Physical Properties
Product Information
Environmental Creden�als
Code for Sustainable Homes
Accepted
NHBC warranty
Accepted
premierguarantee
LABCAccepted
ISO 9001 N� 10224
ISO 14001: 2004
BUREAU VERITASCertification
BE 009119-1
BuildingInsula�onProducts
0107
100%100%Recyclable
Global
<5 Warming Potential
Ozone
0 Depletion Potential
Cellecta ScreedBoard 20(Highly conductive interlocking floorboard)
Routed HEXATHERM XFLOOR250/300 (To suit pipe diameter and centres)
40 50 60 75 80
100 120 140 160
No screws required - interlocking edge detail
Dry boards - No wet trades - quick and easy to install
Low thermal resistance, providing quick responsetimes for under floor heating system
Scree oard dB 20
Physical Properties
Product Information Premium Thermal Performancehas a low thermal resistance when ScreedBoard 20
compared to the other commonly used floor finishes, allowing, boilers, ground water heat pumps and heat recovery systems to work at maximum efficiency.
Accepts ceramic tiles and other floor finishes
Third Party Accredita�on and Approvals
ScreedBoard 202m /kW 0.040
75mm Sand/cement screed2m /kW 0.065
18mm P5 Chipboard2m /kW 0.138
Thermal Conduc�vity EN 12667 (W/mK)
Weight
20 x 600 x 1200
Scree oard dB 20
0.50
25.00kg/m² - 18.00kg/per sheet
Board dimension (mm)
No screws required
100%100%Recycled
Cellecta HEXATHERM XCHIP chipboard/thermal laminate floor boardIn-situ concrete floor slab
GROUND BEARING CONCRETE FLOOR SLAB
Technical Advice 08456 71-71-74 www.cellecta.co.uk
CellectaR
Quick to install
High compressive strength
Interlocking, moisture resistant chipboard facing
Excellent life-long thermal performance
CH Pi
the benefits of a Cellecta XCHiP combines HEXATHERM high performance thermal insulation with a P5 moisture resistant, tongue and groove chipboard to produce a high compressive strength, interlocking floor board.
T&G
Thermal Conductivity EN 12667 (W/mK)
Temperature range
250300
Board size (mm)
Overall thickness’ including18mm P5 chipboard facing (mm)(other sizes manufactured to order)
38
80125
-50/+75oC
0.7%
600x 2400
Long term water absorptionby immersion EN 12087
0.0330.034
<80mm>81mm
43
48 58
68 7893 98
118 138138 178
Edge profile
Min150mm
XCH Pi
Damp proof membrane (DPM)(Can be installed above or below the insulation)
Concrete floor slab (To structural engineer’s specification)
Cellecta HEXATHERM XCHiP(Thermal laminate)
Gf4
Cellecta YELOfon ES10*(Thermal and expansion gap strip installed around floor perimeterThickness: 10mmRoll size: 100mm, 120mm or 150mm high x 50m long )
12
0.25 0.22 0.20 0.18 0.16
0.3
0.4
0.5
0.6
0.7
P/A HEXATHERM XCHiP (mm)ratio
2U-value (W/m K)
0.14 0.12 0.10
<30mm>40mm
<30mm>40mm
Strength at 10% compression EN 826 (kPa)
Strength at 2%compression EN 1606 (kPa)
Pol 1
<5
1
Mat 1
GWP value
Code credits
oElement N 820100056
Note. Pol.1 Code credits have an approximate weighted value of 0.7 Note. Mat 1 Code credits have an approximate weighted value of 0.3
CGreen Guide rating
Code credits 0.5
The following Code for Sustainable Homes credits areobtainable as a result of incorporating HEXATHERM into the construction detailed.
HEXATHERMHE AX THERMXPS boards
Calculated in accordance with ISO 13370
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
Product Benefits
Typical Thickness of Insulation RequiredProduct Information
Environmental Creden�als
Code for Sustainable Homes
Third Party Accredita�on and Approvals
Physical Properties (Insulation)
60 75 90 110 130
75 100 100 120 140
75 100 110 130 150
80 110 120 140 160
100 110 125 150 165
150 200
160 210
180 220
190 230
190 230
250
260
270
280
280
*Not applicable under Q-mark Certification
Accepted
NHBC warranty
Accepted
premierguarantee
LABCAccepted
ISO 9001 N� 10224
ISO 14001: 2004
BUREAU VERITASCertification
BE 009119-1
BuildingInsula�onProducts
0107
100%100%Recyclable
Global
<5 Warming Potential
Ozone
0 Depletion Potential
Technical Advice 08456 71-71-74 www.cellecta.co.uk13
SUSPENDED BEAM AND BLOCK GROUND FLOOR CellectaR
Cellecta HEXATHERM XFLOOR insulation installed below floating screedSuspended pre-stressed concrete beam and block floor
Pol 1
<5
1
HEXATHERMHE AX THERMXPS boards
Mat 1
GWP value
Code credits
oElement N 820140014
BGreen Guide rating
Code credits 1
Beam and block flooring(To structural engineers’ specification)
Sand/cement or anyhydrite screed
Closed cell structure
High compressive strength
Very low water absorption
Excellent life-long thermal performance
FLOOR
XFLOOR extruded polystyrene thermal insula�on boards are designed specifically for domes�c, commercial and industrial flooring applica�ons where a high resistance to compression and water absorp�on is required. 0.25 0.22 0.20 0.18 0.16
0.3
0.4
0.5
0.6
0.7
P/A HEXATHERMXFLOOR 300 (mm)
60 75 90 100 130
60 80 100 110 130
75 90 100 120 140
75 100 110 130 150
75 100 110 130 150
ratio
2U-value (W/m K)Calculated in accordance with ISO 13370
0.14 0.12
160 200
160 200
170 220
180 210
180 215
0.10
240
250
250
270
270
The following Code for Sustainable Homes credits areobtainable as a result of incorporating HEXATHERM into the construction detailed.
Cellecta HEXATHERM XFLOOR 250 (Domestic/commercial applications)
Cellecta HEXATHERM XFLOOR 300 (Domestic/commercial applications)
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
Typical Thickness of Insulation Required
Physical Properties
Product Information
Environmental Creden�als
Code for Sustainable Homes
Third Party Accredita�on and Approvals
Thermal Conduc�vity EN 12667 (W/mK)
Temperature range
250-
Board size (mm)
Thickness’ (mm)(other sizes manufactured to order)
20
80-
-50/+75�C
0.7%
600x 2500
Long term water absorp�onby immersion EN 12087
25
30
Edge profileSquare
-300
-125
-50/+75�C
0.7%
600x 2500
40
50 6075 80
100 120140 160
Square
250 300
XFLOOR
0.033-
0.0330.034
Strength at 10% compressionEN 826 (kPa)
Strength at 2% compressionEN 1606 (kPa)
<80mm>81mm
Physical Properties
Note. Pol.1 Code credits have an approximate weighted value of 0.7 Note. Mat 1 Code credits have an approximate weighted value of 0.3
Accepted
NHBC warranty
Accepted
premierguarantee
LABCAccepted
ISO 9001 N� 10224
ISO 14001: 2004
BUREAU VERITASCertification
BE 009119-1
BuildingInsula�onProducts
0107
Product Benefits
100%100%Recyclable
Global
<5 Warming Potential
Ozone
0 Depletion Potential
Gf5
14Technical Advice 08456 71-71-74 www.cellecta.co.uk
Cellecta TETRIS insulation blocks installed above and between pre-stressed concrete beams. Structural concrete finish
INSULATION BLOCK & BEAM FLOOR
0.25 0.22 0.20 0.18 0.16
0.3
0.4
0.5
0.6
0.7
P/A TETRiS (mm)
90 90 90 120 90
90 90 100 140 90
90 90 120 160 90
100 90 120 160 90
100 100 140 90 90
ratio
2U-value (W/m K)
CellectaR
0.15 0.14
90 90
90 90
90 100
90 120
90 120
0.13
120
120
140
TETRiS
140
TETRiS Patented insulation blocks provide outstanding thermal and structural performance. The blocks sit on and between standard pre-stressed concrete floor beams and finished with a structural concrete topping.
TETRiS TETRiS Suspended ground floor insulation floor system
Pol 1
<5
1
HEXATHERMTETRiSboards
Mat 1
GWP value
Code credits
oElement N 820140051
A+Green Guide rating
Code credits 3
Pre-stressed concrete floor beams(Laid in accordance with beam manufacturers instructions)
75mm (min) structural concrete C30 (reinforced with polypropylene fibres)
C35 Lafarge Agilia Horizontal
Thickness of insulation between the beams varies depending on U-value required
Fixed height above the beams
Thermal Conductivity BS EN 12667 (W/mK)
>300kPa
>300kPa
>300kPa
Compressive strengthBS EN 826
Sheet/strip size (mm)
Over all thickness’ (mm)(other sizes manufactured to order)
125kPa
125kPa
125kPa
600x 2500
300x 2500
50 - 600x 2500
600 x 2500
T600 T300 XFLOOR300
Compressive strengthBS EN 1606
90100 120140 160
75
Edge profile
TETRiS
600 T300
Gap strip
75
Suspended ground floor insulation floor system
TETRiS Vertical edge strip(30mm thick x depth of concrete topping -75mm min)
Produces a floor with zero cold bridges
A+ Green Guide rated system
Quicker and easier to install than a beam & block floor
2U-values as low as 0.13 W/m K achievable
Rebated⁽³⁾ Rebated⁽³⁾ Square
T60075mm15 - 85mm
Square
Underfloor heating easily incorporated
Fixes the floor height above the beams (150 or 225mm)
Supplied in plot specific quantities
(3) Rebated to suit specific beam used
TETRiS + layer of 75mm XFLOOR 300
Foil faced TETRiS
140
100% recyclable
300kPa
125kPa The following Code for Sustainable Homes credits are
obtainable as a result of incorporating HEXATHERM into the construction detailed.
-0.034
-0.034
0.033-
0.033-
<75mm>90mm
Cellecta TETRiS T600/T300(Profiles “T” shaped insulation blocks: 90 - 160mm thick)
TETRiS Gap strip(75mm thick insulation sheet used to bridge any gaps)
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
Typical Thickness of Insulation Required
Physical Properties
Product Information
Environmental Creden�als
Code for Sustainable Homes
Third Party Accredita�on and Approvals
Calculated in accordance with ISO 13370
Note. Pol.1 Code credits have an approximate weighted value of 0.7 Note. Mat 1 Code credits have an approximate weighted value of 0.3
Accepted
NHBC warranty
Accepted
premierguarantee
LABCAccepted
ISO 9001 N� 10224
ISO 14001: 2004
BUREAU VERITASCertification
BE 009119-1
Engineered Floor
SystemEFS-003
Product Benefits
100%100%Recyclable
Global
<5 Warming Potential
Ozone
0 Depletion Potential
Gf6
Technical Advice 08456 71-71-74 www.cellecta.co.uk
CellectaR
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIMFASTRACKCAD FASTRACKBIM
High compressive strength
Closed cell structure, ideal for routing
Excellent life-long thermal performance
FLOOR
Thermal Conduc�vity EN 12667 (W/mK)
Temperature range
Thickness’ (mm)(other sizes manufactured to order)
20 25 30
-50/+75�C
-50/+75�C
250 300XFLOOR
0.033-
0.0330.034
Pol 1
<5
1
GWP value
Code credits
Note. Pol.1 Code credits have an approximate weighted value of 0.7
HEXATHERMHE AX THERMXPS boards
<80mm>81mm
Physical Properties
Product Information
Environmental Creden�als
Code for Sustainable Homes
ISO 9001 N� 10224
ISO 14001: 2004
BUREAU VERITASCertification
BE 009119-1
BuildingInsula�onProducts
0107
100%100%Recyclable
Global
<5 Warming Potential
Ozone
0 Depletion Potential
40 50 60 75 80
100 120 140 160
No screws required - interlocking edge detail
High density dry board - No wet trades
Scree oard dB 20
Physical Properties
Product Information Premium Thermal Performancehas a low thermal resistance when ScreedBoard 20
compared to the other commonly used floor finishes, allowing, boilers, ground water heat pumps and heat recovery systems to work at maximum efficiency.
Robust detail E-FC-1 & 2 and E-FS-1 compliant**
Third Party Accredita�on and Approvals
If1
Cellecta YELOfon ES5*(Thermal, acoustic and expansion gap strip installed around floor perimeter)Thickness: 5mmRoll size: 100mm, 120mm or 150mm high x 50m long )
Cellecta ScreedBoard 20(Highly conductive interlocking floorboard)
Routed HEXATHERM XFLOOR250/300 (To suit pipe diameter and centres)
Cell Cellecta ecta ScreedBoard 20 installed on routed HEXATHERM XFLOOR 250/300
Cellecta
FIBREfon resilient layer installed below UFH thermal insulation board
Building Regulations Part E Solution
Concrete floor slab(To structural engineer’s / Robust detail specification)
Cell FIBREfon 8*resilient layerecta(High performance acoustic sheet)Dimensions: 8mm x 600mm x 1200mm
ScreedBoard 202m /kW 0.040
75mm Sand/cement screed2m /kW 0.065
18mm P5 Chipboard2
m /kW 0.138
Ceiling system (To architect’s / Robust detail specification)
*Not applicable under Q Mark Certification **When used in conjunction with FIBREfon 8
Accepted
NHBC warranty
Accepted
premierguarantee
LABCAccepted
RdCompliantTreatmentE-FC-1 & 2
E-FS 1
Physical Properties
Thermal Conduc�vity EN 12667 (W/mK)
Weight
20 x 600 x 1200
Scree oard dB 20
0.50
25.00kg/m² - 18.00kg/per sheet
Board dimension (mm)
15
No screws required
Low thermal resistance, providing quick responsetimes for under floor heating system
Robust Detail: E-FC-2Typical performance
D +C = 55dB L = 46dB nT,w tr nT,w
100%100%Recycled
INTERMEDIATE CONCRETE FLOOR
INTERMEDIATE CONCRETE FLOOR
Technical Advice 08456 71-71-74 www.cellecta.co.uk
CellectaR
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
16
FASTRACKCAD FASTRACKBIM
Cellecta HEXATHERM XFLOOR 250/300
High compressive strength
Closed cell structure
Excellent life-long thermal performance
FLOOR
Thermal Conduc�vity EN 12667 (W/mK)
Temperature range
Thickness’ (mm)(other sizes manufactured to order)
20 25 30
-50/+75�C
-50/+75�C
250 300XFLOOR
0.033-
0.0330.034
<80mm>81mm
Physical Properties
Product Information
40 50 60 75 80
100 120 140 160
HEXATHERM XFLOOR 250/300 YELOfon HD10+ resilient layer and covered with screed Cell ecta laid on
Incorporating underfloor heating systemBuilding Regulations Part E Solution
Physical Properties
*Not applicable under Q Mark Certification
75mm (min) sand:cement screed 40mm (min) proprietary screed
Pre-cast or in-situ concrete slab (To structural engineer’s specification)
Cellecta
YELOfon HD10+* with
E-strip perimeter edging and J-stripacoustic joining tape
Pre-cast or in-situ concrete(To structural engineer’s / Robust detail specification)
Ceiling system (To architects / Robust detail specification)
Part E Robust detail (E-FC-5) and PCT solution
Acous�c performance
Weight <1.00Kg/m² - 20kg/System pack
Airborne: 52 -55dBImpact: 54 - 47dB
YELOfon HD10+ System
Roll dimensionHD10+: 10mm x 1500mm x 33.33mE-strip: 7mm x 200mm x 33.33mJ-strip: 2.5mm x 75mm x 40m (2 N�)
Lightweight, easy to cut & install rolls
High performance resilient layer
YELOfon HD10+ System*
Product Information
2Over 8,000,000m successfully installed
Suitable for all types of concrete floors & screeds
Acoustic Performance
Pol 1
<5
1
Mat 1
GWP value
Code credits
oElement N 807280045
Note. Pol.1 Code credits have an approximate weighted value of 0.7 Note. Mat 1 Code credits have an approximate weighted value of 0.3
CGreen Guide rating
Code credits 0.5
The following Code for Sustainable Homes credits areobtainable as a result of incorporating HEXATHERM & YELOfon HD10+ into the construction detailed.
Environmental Creden�als
Code for Sustainable Homes
100%100%Recyclable
Global
<5 Warming Potential
Ozone
0 Depletion Potential
HE AX THERM
YELOfon
Third Party Accredita�on and Approvals
ISO 9001 N� 10224
ISO 14001: 2004
BUREAU VERITASCertification
BE 009119-1
BuildingInsula�onProducts
0107
Accepted
NHBC warranty
Accepted
premierguarantee
LABCAccepted
RdCompliantTreatment
E-FC-5
Robust Detail: E-FC-5 (pre-cast)Mean performance
D +C = 52dB L = 54dB nT,w tr nT,w
Typical Thickness of Insulation Required
0.20 0.25 0.30 0.40 0.52
150
200
Thickness of concrete slab
(mm) HEXATHERM XFLOOR 250/300 (mm)
140 100 75 50
140 100 75 50
2U-value (W/m K)
0.55 0.60
30 25
30 25
20
20
Calculated in accordance with ISO 13370
PCT (in-situ slab)Typical performance
D +C = 55dB L = 47dB nT,w tr nT,w
16
If2
Physical Properties
17Technical Advice 08456 71-71-74 www.cellecta.co.uk
Insulation fixed to underside of the slab
CAR PARK/SOFFIT LINING CellectaR
Easy to install
Available in two colours: White & Grey
Excellent life-long thermal performance
CPL
XCPL combine the benefits of a high performance extruded polystyrene with a facing board to produce a composite thermal board to suit car park and soffit lining applications.
Fixing layout
Z
Z
White facing Grey facing
Stainless steel fixing anchors
Intumescent mastic sealant
Pol 1
<5
1
GWP value
Code credits
Note. Pol.1 Code credits have an approximate weighted value of 0.7
The following Code for Sustainable Homes credits areobtainable as a result of incorporating HEXATHERM into the construction detailed.
HEXATHERMHE AX THERMXPS boards
Square
Thermal Conductivity EN 12667 (W/mK)
Temperature range
250300
Board size (mm)
Overall thickness’ including6mm high impact class O facing(other sizes manufactured to order)
26
80125
-50/+75oC
0.7%
1200x 2400
Long term water absorptionby immersion EN 12087
0.0330.034
<80mm>81mm
31
36 46
56 6681 86
106 126146 166
Edge profile
XCPL
<30mm>40mm
<30mm>40mm
Strength at 10% compression EN 826 (kPa)
Strength at 2%compression EN 1606 (kPa)
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
Cellecta HEXATHERM XCPL(High impact faced thermal laminate)Option 1: Grey - 6mm cementitious boardOption 2: White - 6mm Glasroc multiboard
Levelling screed (if required)
Pre-cast or in-situ concrete slab (To structural engineer’s specification)
Typical Thickness of Insulation RequiredProduct Information
Environmental Creden�als
Code for Sustainable Homes
Third Party Accredita�on and Approvals
Physical Properties
150
200
Thickness of concrete slab
(mm) HEXATHERM XCPL (mm)
120 140 160 170
120 140 160 170
2U-value (W/m K)
290
190
Calculated in accordance with ISO 13370
X - 3 - 6mm expansion gap between boardsY - Fixings set in at 50mm (min) from board edgeZ - Fixings set at 600mm maximum centres
XY
Y
Smooth high impact facing
0.25 0.22 0.20 0.18 0.16
Accepted
NHBC warranty
Accepted
premierguarantee
LABCAccepted
ISO 9001 N� 10224
ISO 14001: 2004
BUREAU VERITASCertification
BE 009119-1
100%100%Recyclable
Global
<5 Warming Potential
Ozone
0 Depletion Potential
Product Benefits
Sl1
Loading RequirementsThe roof structure must be strong enough to withstand the maximum expected loads with a suitable factor of safety. Inverted roofs are subject to three main loads: dead, wind and imposed - refer to BS 6399: Parts 1, 2 & 3 for further guidance.The insulation must be covered with either ballast or paving slabs to protect it from ultra-violet degradation and to prevent wind up-lift, or floating. To calculate the weight of ballast required refer to BRE Digest 295. For severe exposure zones or tall buildings, specialist advice should be sought. BRE Digest 311 Windscour of gravel ballast on roofs should be used when acalculation is required for a specific building project.
Filter LayerDamage to the membrane may occur if fines are washed between the insulation boards. To prevent this, the insulation should be covered with either a suitable water permeable non-woven polyester filter layer or HEXATEX thermal improvement membrane, which will also improve the thermal efficiency of the insulation boards.
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
-10
-0
10
20
30
40
oTe
mpera
ture
C
HEXATEX Thermal Improvement MembraneThe thickness of insulation used on an inverted roof must be increased by 20% to allow for the intermittent cooling effect of rainwater on the waterproof membrane. On roofs with a fall of 1:60 - 1:80 the cooling effect can be dramatically reduced, the non-woven filter layer between the insulation and the ballast with HEXATEX vapour permeable, thermal Improvement membrane.
HEXATEX Physical SpecificationsThickness: 0.4 mmRoll size: 1.5m x 50m
2Weight: 112g/mWater vapour resistance (BS 3177): 0.21 MNs/gWater column:> 2.00mTensile strength longitudinal (BS 2782-3): 221 N/50mmTensile strength transverse (BS 2782-3): 177 N/50mmFire rating (CE): ETemperature range: -40°C to + 80°CUV stability: 2 months
Technical Advice 08456 71-71-74 www.cellecta.co.uk
INTRODUCTIONUnlike conventional warm and cold roof constructions, HEXATHERM inverted roof insulation protects the waterproof membrane from a number of stresses: freeze-thaw action, solar radiation, damage caused by interstitial condensation, ultra-violet degradation and mechanical damage caused by foot traffic during construction and maintenance. Consequently, the life expectancy of the membrane is greatly increased.Key Benefits of HEXATHERM Inverted Roof Insulation
Excellent life-long thermal performanceVery low water absorptionHigh compressive strength - able to withstand long-term static loadsCode for Sustainable Homes Pol.1 compliantEnvironmentally friendly - 100% recyclable
Thermal Shock ProtectionThe graph below illustrates two temperature variations: the red area shows a typical unprotected warm roof membrane; the yellow shows a membrane protected with HEXATHERM inverted insulation boards.
CellectaRINVERTED FLAT ROOF
HEXATEX laid at right angles to the roof’s fall with 150mm overlaps running down the slope. Turned up at up-stands by at least the thickness of the ballast.
150mm overlapIr1
mb protected me raERM neHTAXEH
18
Bermondsey Spa, London
BALLASTED INVERTED FLAT ROOF
Technical Advice 08456 71-71-74 www.cellecta.co.uk
Waterproof membrane
Screed laid to falls
Structural roof deck(To structural engineer’s specification)
CellectaR
Closed cell structure
High compressive strength
Very low water absorption
Excellent life-long thermal performance
ROOF L300
XROOF 300L extruded polystyrene thermal insula�on boards are designed specifically for inverted roof applica�ons where a high resistance to compression and very low water absorp�on is essen�al.
Ir2
Thermal Conduc�vity BS EN 12667 (W/mK)
Temperature range
Compressive strengthBS EN 826
Board size (mm)
Thickness’ (mm)(other sizes manufactured to order)
Long term water absorp�onby immersion BS EN 12087
Compressive strengthBS EN 1606
Edge profile
0.25 0.20 0.18
(A) HEXATHERM XROOF 300L 160 190* 220*
2U-value (W/m K)
0.16 0.14
250* 300*
0.12
360*
Thickness of insulation requiredfor a 200mm concrete deck
L(B)HEXATHERM XROOF 300L
(C)+ HEXATEX
140 170* 190* 210* 240* 280*
Notes. Thickness calculated in accordance with EN ISO 6946& ETAG 301-2010(A) Based on 0.03 fx, 1.7mm/day average rainfall(B) Based on 0.001 fx & 1.7mm/day average rainfall(C) Supplied in rolls 1.5 x 50m* Multiple layers of XROOF 300
300kPa
125kPa
0.7%
-50/+75�C
600x 1250
50 6080
100 120140 160
Shiplap
XROOF L300
75Pol 1
<5
1
Mat 1
GWP value
Code credits
oElement N 812530050
Note. Pol.1 Code credits have an approximate weighted value of 0.7 Note. Mat 1 Code credits have an approximate weighted value of 0.3
CGreen Guide rating
Code credits 0.5
The following Code for Sustainable Homes credits areobtainable as a result of incorporating HEXATHERM into the construction detailed.
HEXATHERMHE AX THERMXPS boards
Cellecta HEXATHERM XROOF 300L ballasted with washed rounded gravel1:60-1:80 Falls
Cellecta HEXATEX* (thermal improvement membrane)
or Geotextile filter fleece
Cellecta HEXATHERM XROOF 300L (Inverted roof insulation)
Washed rounded gravel ballast
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
0.0330.034
<80mm>81mm
Product Benefits
Physical Properties
Product Information
Environmental Creden�als
Code for Sustainable Homes
Third Party Accredita�on and Approvals
Typical Thickness of Insulation Required
19
Accepted
NHBC warranty
Accepted
premierguarantee
LABCAccepted
ISO 9001 N� 10224
ISO 14001: 2004
BUREAU VERITASCertification
BE 009119-1
BuildingInsula�onProducts
0107
*Not applicable under Q-mark Certification
100%100%Recyclable
Global
<5 Warming Potential
Ozone
0 Depletion Potential
Insulation ballasted with timber decking and washed rounded gravelInsulation with integral drainage channels
1:60-1:80 Falls
INVERTED FLAT ROOF CellectaR
High compressive strength
Very low water absorption
Excellent life-long thermal performance
DRAiN
XDRAiN extruded polystyrene inverted roo�oards have a unique pa�en of drainage channels on their underside, which speeds up the shedding of rainwater, elimina�ng the need for a separa�on drainage mat.
Thermal Conduc�vity BS EN 12667 (W/mK)
Temperature range
Compressive strengthBS EN 826
Board size (mm)
Thickness’ (mm)(other sizes manufactured to order)
Long term water absorp�onby immersion BS EN 12087
Compressive strengthBS EN 1606
<80mm>81mm
Edge profile
Washed rounded ravel ballast
Geotextile filter layer
Timber decking
Integral drainage channels
XDRAIN’s unique pattern of drainage channels sheds water off the roof whatever the boards’ orientation
300kPa
125kPa
0.7%
-50/+75�C
600x 1250
50 6080
100 120140 160
Shiplap
75
300kPa
125kPa
0.7%
-50/+75�C
600x 1250
50 6080
100 120140 160
Shiplap
75
A R C H I T E C T U R A L C A D D ATA B A S E S
FASTRACKCAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
XDRAiN
0.0330.034
XROOF L300
0.0330.034
Product Benefits
Physical Properties
Product Information Typical Thickness of Insulation Required
Pol 1
<5
1
Mat 1
GWP value
Code credits
oElement N 812530050
Note. Pol.1 Code credits have an approximate weighted value of 0.7 Note. Mat 1 Code credits have an approximate weighted value of 0.3
CGreen Guide rating
Code credits 0.5
The following Code for Sustainable Homes credits areobtainable as a result of incorporating HEXATHERM into the construction detailed.
HEXATHERMHE AX THERMXPS boards
Environmental Creden�als
Code for Sustainable Homes
Third Party Accredita�on and Approvals
Waterproof membrane
Screed laid to falls
Structural roof deck(To structural engineer’s specification)
Cellecta HEXATHERM XDRAiN(inverted roof insulation with integral drainage channels)
Ir6
Technical Advice 08456 71-71-74 www.cellecta.co.uk
0.25 0.22 0.20
(A) HEXATHERM XDRAiN 160 190* 210*
2U-value (W/m K)
0.18 0.16
240 290
Thickness of insulation requiredfor a 200mm concrete deck
Calculated in accordance with ISO 6946: 1997
Notes. Thickness calculated in accordance with EN ISO 6946& ETAG 301-2010(A) Based on 0.03 fx, 1.7mm/day average rainfall(B) Based on 0.001 fx & 1.7mm/day average rainfall(C) Supplied in rolls 1.5 x 50m*Addi�onal layer of XROOF 300 required
20
Accepted
NHBC warranty
Accepted
premierguarantee
LABCAccepted
ISO 9001 N� 10224
ISO 14001: 2004
BUREAU VERITASCertification
BE 009119-1
BuildingInsula�onProducts
0107
100%100%Recyclable
Global
<5 Warming Potential
Ozone
0 Depletion Potential
Insulation ballasted with washed paving slabs0� Falls
INVERTED FLAT ROOF
Technical Advice 08456 71-71-74 www.cellecta.co.uk
CellectaR
Drainage gully liningInsulation ballasted with paving slabs
1:60-1:80 Falls
Cellecta HEXATHERM XMD Vertical up-stand insulation boardInsulation ballasted with washed rounded gravel
Suitable for roofs with and without falls
Ir3
Ir4
Ir5
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
Waterproof membrane
Structural roof deck(To structural engineer’s specification)
Geotextile filter fleece
Cellecta HEXATHERM XROOF 300L/XDRAiN
Paving slab on supports
Waterproof membrane
Screed laid to falls
Structural roof deck(To structural engineer’s specification)
Cellecta HEXATEX (thermal improvement membrane)
or Geotextile filter fleece
Cellecta HEXATHERM XROOF 300L/XDRAiN
Paving slab on supports
Waterproof membrane
Screed laid to falls
Structural roof deck(To structural engineer’s specification)
Cellecta HEXATEX (Thermal improvement membrane)
or Geotextile filter fleece
Cellecta HEXATHERM XMD(Vertical up-stand insulation)Thickness’ available: 6mm facing + 50 -160mm insulationBoard dimensions: 1200mm x 2400mmThermal resistance: 0.033-0.034W/m²K
Washed rounded gravel ballast
Cellecta HEXATHERM XROOF 300L/XDRAiN
21
Insulation ballasted with planting layerInsulation with integral drainage channels
0� Falls
INVERTED FLAT ROOF
0.25 0.22 0.20
(A) HEXATHERM XDRAiN 160 190* 210*
2U-value (W/m K)
CellectaR
0.18 0.16
240 290
High compressive strength
Very low water absorption
Excellent life-long thermal performance
DRAiN
XDRAiN extruded polystyrene inverted roo�oards have with a unique pa�en of drainage channels on their underside specifically which speeds up the shedding of rainwater, elimina�on the need for a separa�on drainage mat, making them ideal for green roofs.
Thermal Conduc�vity BS EN 12667 (W/mK)
Temperature range
Compressive strengthBS EN 826
Board size (mm)
Thickness’ (mm)(other sizes manufactured to order)
Long term water absorp�onby immersion BS EN 12087
Compressive strengthBS EN 1606
<80mm>81mm
Edge profile
Thickness of insulation requiredfor a 200mm concrete deck
Geotextile filter layer
Gravel filter layer
Planting layer
Integral drainage channels
XDRAIN’s unique pattern of drainage channels sheds water off the roof whatever the boards’ orientation
300kPa
125kPa
0.7%
-50/+75�C
600x 1250
50 6080
100 120140 160
Shiplap
75
300kPa
125kPa
0.7%
-50/+75�C
600x 1250
50 6080
100 120140 160
Shiplap
75
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
XDRAiN
0.0330.034
XROOF L300
0.0330.034
Product Benefits
Physical Properties
Product Information Typical Thickness of Insulation Required
Pol 1
<5
1
Mat 1
GWP value
Code credits
oElement N 812530050
Note. Pol.1 Code credits have an approximate weighted value of 0.7 Note. Mat 1 Code credits have an approximate weighted value of 0.3
CGreen Guide rating
Code credits 0.5
The following Code for Sustainable Homes credits areobtainable as a result of incorporating HEXATHERM into the construction detailed.
HEXATHERMHE AX THERMXPS boards (1)
Environmental Creden�als
Code for Sustainable Homes
Third Party Accredita�on and Approvals
Root barrier
Waterproof membrane
Structural roof deck(To structural engineer’s specification)
Cellecta HEXATHERM XDRAiN(inverted roof insulation with integral drainage channels)
22
Calculated in accordance with ISO 6946: 1997
Notes. Thickness calculated in accordance with EN ISO 6946& ETAG 301-2010(A) Based on 0.02 fx, 1.7mm/day average rainfall*Addi�onal layer of XROOF 300 required
Gr1
Technical Advice 08456 71-71-74 www.cellecta.co.uk
Accepted
NHBC warranty
Accepted
premierguarantee
LABCAccepted
ISO 9001 N� 10224
ISO 14001: 2004
BUREAU VERITASCertification
BE 009119-1
BuildingInsula�onProducts
0107
100%100%Recyclable
Global
<5 Warming Potential
Ozone
0 Depletion Potential
Insulation placed below reinforced concrete and paving grade waterproofing
CAR PARK DECKS CellectaR
0.25 0.20 0.18
(A) HEXATHERM XROOF 500L 130* 160 180*
2U-value (W/m K)
0.16 0.14
200* 240*
0.12
280*
Thickness of insulation requiredfor a 200mm concrete deck
A R C H I T E C T U R A L C A D D ATA B A S E S
FASTRACKCAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
Typical Thickness of Insulation Required
100%100%Recyclable
Ozone
0 Depletion Potential
Environmental Creden�als
Third Party Accredita�on and Approvals
Calculated in accordance with ISO 6946: 1997
Notes. Thickness calculated in accordance with EN ISO 6946& ETAG 301-2010(A) Based on 0.03 fx, 1.7mm/day average rainfall*Addi�onal layer of XROOF 300 required
Closed cell structure
Excellent life-long thermal performance
Very low water absorption
Extra high compressive strength
ROOF L500
XROOF 500L extruded polystyrene thermal insula�on boards have excellent thermal characteris�cs and extra high compressive strength make them ideal for high load applica�ons such as plant rooms and car park decks.
Thermal Conduc�vity BS EN 12667 (W/mK)
Temperature range
Compressive strengthBS EN 826
Board size (mm)
Thickness’ (mm)(other sizes manufactured to order)
Long term water absorp�onby immersion BS EN 12087
Compressive strengthBS EN 1606
Edge profile
500kPa
180kPa
0.7%
-50/+75�C
600x 1250
50 6080
100 120140 160
Shiplap
XROOF 500L
75
0.035
Product Benefits
Physical Properties
Product Information
Reinforced concrete(To structural engineer’s specification)
Seperating layer
Paving grade waterproofing
Screed to falls
Structural roof deck
Cellecta HEXATHERM XROOF 500L (Extra high compressive strength insulation)
23
Cp1
Technical Advice 08456 71-71-74 www.cellecta.co.uk
Accepted
NHBC warranty
Accepted
premierguarantee
LABCAccepted
ISO 9001 N� 10224
ISO 14001: 2004
BUREAU VERITASCertification
BE 009119-1
BuildingInsula�onProducts
0107
Proprietary Cavity Closers Cellecta
INTRODUCTIONCellecta’s proprietary cavity closers eliminate cold bridging around window and door openings, ensuring compliance with Part L. Both types of UNICLOSER X incorporates a high performance extruded polystyrene thermal core and at least one rigid dpc profile. Eight standard* sizes are available to suit different cavity widths.
PRODUCT INFORMATION
Quick and easy to install
Effective DPC
Compatible with full and partial fill cavity insulation
Eliminates cold bridging around window anddoor openings
UNiCLOSER
XCPL combine the benefits of a HEXATHERM extruded polystyrene with one or two U-PVC damp proof course profiles to produce a rigid cavity closer that eliminates cold bridging around window and door openings.
Thermal Conductivity EN 12667 (W/mK)
Closer length (mm)
*Standard widths(Other sizes manufactured to order)
50
1
2500
Number of DPC profiles
0.033
65
75 85
90 100125 150
Profile(s) detail
6 “Universal fixings”Number of fixings required per length
50
2
2500
0.033
65
75 85
90 100125 150
12 “Wall ties”
UNiCLOSER X
Standard Double Standard
Pol 1
<5
1
GWP value
Code credits
Note. Pol.1 Code credits have an approximate weighted value of 0.7
The following Code for Sustainable Homes credits areobtainable as a result of incorporating HEXATHERM into the construction detailed.
CODE FOR SUSTAINABLE HOMES
HEXATHERMHE AX THERMXPS boards
THIRD PARTY ACCREDITATION & APPROVALS
Building the closer in as the wall is constructed UNICLOSER X - StandardAs the wall is built, simply push the universal fixings into the closer’s insulation core at 225mm intervals around door openings and 450mm intervals around window openings and bed into the mortar joints.
UNICLOSER X - Double StandardAs the wall is constructed, simply clip wall ties into the closer’s track at 225mm intervals around door openings and 450mm intervals around window openings and bedded into the mortar joints.
Retro fit UNICLOSER X - StandardIf the wall has already been constructed, simply snap the leg off the universal fixing and push the remaining bracket into the closer’s insulation core at <450mm intervals. Push the closer into the cavity and secure with masonry nails.
24
Physical Properties
Technical Advice 08456 71-71-74 www.cellecta.co.uk
Accepted
NHBC warranty
Accepted
premierguarantee
LABCAccepted
ISO 9001 N� 10224
ISO 14001: 2004
BUREAU VERITASCertification
BE 009119-1
BuildingInsula�onProducts
0107
100%100%Recyclable
Global
<5 Warming Potential
Ozone
0 Depletion Potential
Environmental Creden�als
Product Benefits
Typical Thickness of Insulation Required
Technical Advice 08456 71-71-74 www.cellecta.co.uk25
Min 30mmoverlap
Min 30mmoverlap
Sill DetailsUNICLOSER X StandardPartial fill cavity insulation and dry lined
UNICLOSER X Double StandardPartial fill cavity insulation and plasterboard thermallaminate
UNICLOSER X StandardFull fill cavity insulation and dry lined
Min 30mmoverlap
UNICLOSER X Double StandardPartial fill insulation and dry lined
UNICLOSER X Double StandardFull cavity insulation and wet plastered
UNICLOSER X Standard - reveal detailPartial fill cavity insulation and dry lined
Cc7 Cc9Cc8
Cc3
Min 30mm overlapMin 30mm overlapMin 30mm overlap
UNICLOSER X Standard Full cavity insulation and wet plastered
Cc2
Cc1
Cc4
Cc5
Min 30mm overlapMin 30mm overlap
UNICLOSER X Double StandardLarge width cavity up 300mm wide
Cc6
Min 30mm overlap
Min 30mm overlapMin 30mm overlap
Min 30mm overlapMin 30mm overlapMin 30mm overlap
Min 30mm overlap
Vertical Jamb DetailsUNICLOSER X Standard Partial fill insulation and dry lined
26
Building Regulations 2013 - Approved Document L1A & L1B: Conservation of Fuel and Power in Dwellings
Building Regulations 2013 - Approved Document L2A & L2B: Conservation of Fuel and Power in Buildings Other Than Dwellings
Building Regulations 2003 - Approved Document E: 2010 Edition: Resistance to the Passage of Sound
Scottish Building Standards 2013 - Section 5: Noise
Scottish Building Standards 2013 - Section 6: Energy
Approved Document Basements for Dwellings, BCA/NHBC, 1997, ISBN 0-7210-1508-5
Building Research Establishment Document BR 262: 2002 ”Thermal Insulation: Avoiding Risks”
CIBSE Guide A: Environmental Design, Section A3: Thermal Properties of Building Structures
DEFRA DTLR - Limiting thermal bridging and air leakage: Robust construction details for dwellings and similar buildings
BRE: The Code For Sustainable Homes - Technical guide 2014
BS EN ISO 13370: 2007 - Thermal performance of buildings: heat transfer via the ground: Calculation Methods
BS 5250: 1989 - Code of practice for control of condensation in buildings
BS 6399: 1996:1 - Loading for buildings: Code of practice for dead and imposed loads
BS 8215: 1991 - Code of practice for design and installation of damp proof courses in masonry construction
BS 6367: 1983 - Code of practice for drainage of flat roofs and paved areas.
BS EN ISO 717: 1997 - Impact sound transmission of a separating floor.
BS EN 12667: 2000 - Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
BS EN 13164 - Extruded polystyrene boards: Specification for boards manufactured from extruded polystyrene
BS EN 826 - Thermal insulating products for building applications: Determination of compression behaviour
BS EN 12086: 1997 - Thermal insulating products for building applications: Determination of water vapour transmission properties
BS EN 12087 - Thermal insulating products for building applications: Determination of long term water absorption by immersion
BS EN 12088 - Thermal insulating products for building applications: Determination of long-term water absorption by diffusion
prEN ISO 11925-2 - Reaction to fire tests for building products Part 2: Ignitability when subjected to direct impingement of flame (ISO/DIS 11925-2:1998)
Glossary
Thermal conductivity (Lambda value -): This is a measure of the rate at which a material will pass heat and is expressed in units of Watts per metre per degree of temperature difference (W/mK).
U-value: This is a measure of how much heat will pass through a square metre of a structure when the air temperatures on either side differ by one degree. U-values are expressed in units of Watts per square metre
2per degree of temperature difference (W/m K).
Thermal bridging is a thermally conductive material which penetrates or bypasses an insulation system; such as a metal fastener, concrete beam, slab or column. Heat will flow along the easiest path from the heated space to the outside - the path with the least resistance. This will not necessarily be the path perpendicular to the surfaces. Frequently heat will "short circuit" through an element which has a much higher conductivity than surrounding material, which can be described as a thermal bridge.Typical effect of thermal bridges are: Decreased interior surface temperatures, in the worst cases this can result condensation problems, particularly at corners.
Significantly increased heat losses and cold areas in buildings.
Y -values ():This is a measure of the total heat loss expected from all of the thermal bridge losses in all of the junctions in the building.
Standards & Codes of Practice
Technical Advice 08456 71-71-74 www.cellecta.co.uk
HEXATHERM, XPOOL, TETRiS, FIBREfon, YELOfon, DECKfon, ScreedBoard, HiDECK and HiGYP are registered trademarks of Cellecta Limited
27
Further InformationNotesCellecta reserves the right to amend product specifications without prior notice. Colours shown are for illustration purposes. Product technical data stated is typical. The information included in this brochure is based on Cellecta’s experience and is believed to be reliable. The Green Guide rating and Code credits quoted are given as a guide and should be checked accordingly. U-values quoted and applications illustrated are typical and should not be taken as a basis for design.
Cellecta, as the manufacturer, has no control over the installation of its products. The purchaser should evaluate the product's suitability and is responsible for adhering to any laws or regulations in this respect, making the purchaser also liable for observing any third party rights.
Architectural DrawingsArchitects and designers can quickly and easily insert Cellecta insulation products into their drawings by either downloading the specific detail from Cellecta’s web site or contacting Cellecta’s technical team on Tel. 08456 71-71-74 who will email the relevant file.
Specification ClausesArchitects, designers and specifiers can quickly and easily insert Cellecta insulation products into their specification document, by either downloading the specific clause from Cellecta’s website, contacting Cellecta’s technical team on Tel. 08456 71-71-74 or email [email protected], who will email the relevant clause.
Health and SafetyCellecta extruded polystyrene boards are chemically inert and require no special treatment. Copies of COSHH data for all Cellecta products are available upon request.
Fire classificationCellecta extruded polystyrene insulation boards contain a fire retardant additive to inhibit accidental ignition. However, plastic foams are combustible and may burn rapidly if exposed to intense fire. Euroclass E in accordance with BS EN 13501
PackagingCellecta insulation products are packed in recyclable opalescent polythene bags.
On-site handling & storage When storing Cellecta insulation products on site, it is important to protect them from long-term exposure to direct sunlight, otherwise surface degradation may occur. To reduce this, packs should be covered with a light-coloured sheeting. Cellecta insulation products are resistant to attack by mould and microbial growth.
FASTRACKCAD
A R C H I T E C T U R A L C A D D ATA B A S E S
FASTRACKCAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
Technical Advice 08456 71-71-74 www.cellecta.co.uk
BM TRADA Q Mark CertificationThe BM TRADA Q-Mark is regarded as one of the most rigorous certification processes available for construction products. It is a quality mark that identifies the product(s) as having been assessed against specified performance levels through independent accredited testing.
The BM TRADA Q-Mark enables Q-Mark customers to prove the worth of their products whilst gaining competitive advantage over other manufacturers allowing specifiers and end users to buy with confidence.
EN 13164: 2012
The following Cellecta products feature BM TRADA Q-Mark certification of the Building Insulation Products Scheme (certificate number BIP-0107/EFS-003*):HEXATHERM XFLOOR 250, 300 & 500HEXATHERM XPOOLHEXATHERM XPERiHEXATHERM XDRAiNHEXATHERM XCHiPHEXATHERM XROOF 300L & 500LHEXATHERM XDRAiNHEXATHERM XCHiPHEXATHERM UNICLOSER XTETRiS*
N� 10224
Building Insula�onProducts 0107
HEXATHERM insulation boards are manufactured in accordance with European CE legislation
Engineered Floor System 003
oThe UK’s N 1 for Acoustic Treatments and Technical Insulation ProductsoThe UK’s N 1 for Acoustic Treatments and Technical Insulation Products
CellectaR
I N N O V A T I O N I N I N S U L A T I O N
RRR
Cellecta App
CellectaR
I N N O V A T I O N I N I N S U L A T I O N
Videos News RefurbNew Build More
ScreedBoardThe ultimate floor board...
FASTRACKA R C H I T E C T U R A L C A D D ATA B A S E S
CAD FASTRACKA R C H I T E C T U R A L B I M D ATA B A S E S
BIM
Closed Cell Acoustic Products Fibrous Based Acoustic Products Open Cell Acoustic Treatments
High Density Interlocking Floor Boards
YELOfon FIBREfon DECKfon
Scree oarddB HiGYPHigh Density Wall Boards
HiDECKHigh Density Floor Boards
Other products available from Cellecta
Tel: 08456 71 71 74- -Fax: 08456 71 71 72- -Email: technical [email protected]
Cell extensive range of high performance thermal and acoustic insulation ecta’s products are supported by a technical advice line staffed by experienced consultants who can provide a number of useful services:
U-value, condensation risk or imposed load calculationsGive advice on the most suitable product to useSupply detailed fixing instructionsArrange site surveys Technical specifications