high data rate characterization reportsuddendocs.samtec.com/testreports/hsc-report_eqdp_web.pdfall...
TRANSCRIPT
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 All Rights Reserved
High Data Rate Characterization Report
EQDP-014-39.37-TEU-SEU-1 EQDP-014-39.37-TTR-SEU-1 EQDP-014-39.37-TTR-STL-1
Mated with: QSE-014 and QTE-014
Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: ii All Rights Reserved
Table of Contents Introduction ...................................................................................................................1 Product Description .......................................................................................................1 Results Summary..........................................................................................................3
Time Domain Data.....................................................................................................3 Impedance .............................................................................................................3 Timing Measurements............................................................................................4 NEXT .....................................................................................................................4 FEXT ......................................................................................................................5
Frequency Domain Data............................................................................................6 Insertion Loss.........................................................................................................6 Return Loss............................................................................................................9 Near End Crosstalk ..............................................................................................12 Far End Crosstalk ................................................................................................15
Test Procedures..........................................................................................................18 Fixturing:..................................................................................................................18 Time Domain Testing...............................................................................................22
Impedance: ..........................................................................................................22 Propagation Delay:...............................................................................................22 Skew: ...................................................................................................................22 NEXT and FEXT: .................................................................................................22
Frequency Domain Testing......................................................................................23 Attenuation ...........................................................................................................23 Return Loss..........................................................................................................23 Near and Far End Crosstalk.................................................................................23
Equipment ...................................................................................................................25 Time Domain Testing...............................................................................................25
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 1 All Rights Reserved
Introduction This testing was performed to evaluate the electrical performance of the EQDP series of high-speed cable systems. Testing was performed in accordance to the High Performance Electrical Interconnect (HPEI) SFF-8416, Level 11 testing standards when applicable. Time domain and frequency domain measurements were made. Time domain measurements included impedance, propagation delay, crosstalk and skew. Frequency domain measurements were preformed using Tektronix’s IConnect® and Measurement XTractor™ software (Version 3.6.0) and included insertion loss (IL), return loss (RL), near end crosstalk (NEXT) and far end crosstalk (FEXT). All measurements were made utilizing Final Inch™ test boards and are referred to as “test board” in this report. The test boards were identified as “QSE014_Case_4 Rev 4” and “QTE014_Case_4 Rev 4”.
Product Description Each sample consists of two 39.37 inches (1m) long, #30 AWG mini twin-ax ribbon cables that contain 7 differential pairs each. The cables are terminated by soldering a small transition PCB (termination board) at each end. Each termination board has a connector soldered to it. All cable assemblies are terminated with a QSE high-speed socket at one end and a QTE shrouded header at the other end. There are two connector types, edge-mount (EM) and double vertical mount or surface mount (DV). The cable connectors contain 20 positions per row. Every third position is vacant (no terminal) thus establishing a differential pair cable assembly. One wiring configuration, the non-crossover (-1) version, was tested. The -1 version uses two non-crossover termination boards that are green in color and are used to connect the outer connector row of one connector to the outer row of the opposite connector and the inner connector row of one to the inner connector of the other creating a Pin 1 to Pin 1 mapping. Three different EQDP cable assembly terminations were tested: EM-EM, DV-EM and DV-DV. Each termination type was tested by mating the cable assembly connector to a DV type of test board connector. One sample of each type of termination configuration was tested. The actual sample part numbers that were tested are shown in Table 1, which also identifies End 1 and End 2 of the assembly; a relative sample picture is shown in Figure 1. Two lines, the longest and the shortest electrical paths, of each sample were tested. 1 Measurement and Performance Requirements for HPEI Bulk Cable, Rev 15, June 27, 2005
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 2 All Rights Reserved
Length Part Number Termination End 1 End 2 39.37 in. EQDP-014-39.37-TEU-SEU-1 EM EM TEU SEU 39.37 in EQDP-014-39.37-TTR-SEU-1 DV EM TTR SEU 39.37 in EQDP-014-39.37-TTR-STL-1 DV DV TTR STL
Table 1: Sample Descriptions
Figure 1: Test Sample Configuration
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 3 All Rights Reserved
Results Summary
Time Domain Data
Impedance Impedance measurements were performed using a filtered risetime of 100 pS. Note that all measurements were performed with the cable assembly mated to the respective connector/test board. Data was measured at the cable connector and 200 pS into the cable.
End Option Cable
End 1 End 2 End 1 End 2
Assembly
Path
Zmin (Ω) Zmax (Ω) Zmin (Ω) Zmax (Ω) Znom (Ω) Znom (Ω)
Long 84.4 92.3 85.6 95.0 96.3 96.8 TEU-SEU-1
Short 85.2 92.2 85.3 95.5 95.0 96.2
Long 84.6 87.9 85.7 95.9 96.7 96.2 TTR-SEU-1
Short 84.7 88.3 85.2 96.1 96.2 97.2
Long 84.5 87.6 82.7 85.6 98.3 99.0 TTR-STL-1
Short 85.2 88.7 83.8 87.9 97.3 97.1
Table 2: Impedance Measurements
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 4 All Rights Reserved
Timing Measurements Skew was calculated as the difference between the propagation delay of the longest and the shortest electrical paths. End 1 of the assembly was the source end for these measurements. The results are tabulated below.
Assembly Path Propagation Delay (nS)
Skew (nS)
Long 4.921 TEU-SEU-1
Short 4.931 .010
Long 4.951 TTR-SEU-1
Short 4.952 .001
Long 4.870 TTR-STL-1
Short 4.908 .038
Table 3: Timing Measurements
NEXT The near end crosstalk was measured in the time domain and converted to a percentage and reported below in Table 4. The incident pulse amplitude from the TDR was 470 mV. The acquired data was measured using a filtered rise time of 100 pS. The End 1 and End 2 headings in Table 4 represents the near-end cable assembly connector, i.e. the source end. All NEXT measurements were performed with the cable assembly mated to the respective connector/test board. Since most of the crosstalk occurs in the connectors, the values in Table 4 represent the crosstalk that occurs in the near-end mated cable assembly and the test board connectors.
End 1 End 2 Assembly Path
NEXT (mV) NEXT (%) NEXT (mV) NEXT (%) Long 4.6 0.98 4.4 0.94 TEU-SEU-1 Short 4.6 0.98 4.6 0.98 Long 3.8 0.81 4.6 0.98 TTR-SEU-1 Short 4.0 0.85 4.2 0.89 Long 4.0 0.85 4.2 0.89 TTR-STL-1 Short 4.0 0.85 4.0 0.85
Table 4: % NEXT
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 5 All Rights Reserved
FEXT The far end crosstalk was measured in the time domain and converted to a percentage and reported below in Table 5. The incident pulse amplitude from the TDR was 470 mV. The acquired data was measured using a filtered rise time of 100 pS. The End 1 and End 2 headings in Table 5 represents the near-end cable assembly connector, i.e. the source end. All FEXT measurements were performed with the cable assembly mated to the respective connector/test board. The values in Table 5 represent the crosstalk measured at the far end of the assembly.
End 1 End 2 Assembly Path
FEXT (mV) FEXT (%) FEXT (mV) FEXT (%) Long 1.04 0.22 1.04 0.22 TEU-SEU-1 Short 0.80 0.17 0.96 0.20 Long 0.96 0.20 1.04 0.22 TTR-SEU-1 Short 0.88 0.19 0.96 0.20 Long 1.44 0.31 1.20 0.26 TTR-STL-1 Short 0.88 0.19 1.12 0.24
Table 5: % FEXT
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 6 All Rights Reserved
Frequency Domain Data
Insertion Loss
Figure 2: EQDP-014-39.37-TEU-SEU-1 Insertion Loss Short Path
Figure 3: EQDP-014-39.37-TEU-SEU-1 Insertion Loss Long Path
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 7 All Rights Reserved
Figure 4: EQDP-014-39.37-TTR-SEU-1 Insertion Loss Short Path
Figure 5: EQDP-014-39.37-TTR-SEU-1 Insertion Loss Long Path
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 8 All Rights Reserved
Figure 6: EQDP-014-39.37-TTR-STL-1 Insertion Loss Short Path
Figure 7: EQDP-014-39.37-TTR-STL-1 Insertion Loss Long Path
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 9 All Rights Reserved
Return Loss
Figure 8: EQDP-014-39.37-TEU-SEU-1 Return Loss Short Path
Figure 9: EQDP-014-39.37-TEU-SEU-1 Return Loss Long Path
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 10 All Rights Reserved
Figure 10: EQDP-014-39.37-TTR-SEU-1 Return Loss Short Path
Figure 11: EQDP-014-39.37-TTR-SEU-1 Return Loss Long Path
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 11 All Rights Reserved
Figure 12: EQDP-014-39.37-TTR-STL-1 Return Loss Short Path
Figure 13: EQDP-014-39.37-TTR-STL-1 Return Loss Long Path
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 12 All Rights Reserved
Near End Crosstalk
Figure 14: EQDP-014-39.37-TEU-SEU-1 NEXT Short Path
Figure 15: EQDP-014-39.37-TEU-SEU-1 NEXT Long Path
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 13 All Rights Reserved
Figure 16: EQDP-014-39.37-TTR-SEU-1 NEXT Short Path
Figure 17: EQDP-014-39.37-TTR-SEU-1 NEXT Long Path
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 14 All Rights Reserved
Figure 18: EQDP-014-39.37-TTR-STL-1 NEXT Short Path
Figure 19: EQDP-014-39.37-TTR-STL-1 NEXT Long Path
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 15 All Rights Reserved
Far End Crosstalk
Figure 20: EQDP-014-39.37-TEU-SEU-1 FEXT Short Path
Figure 21: EQDP-014-39.37-TEU-SEU-1 FEXT Long Path
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 16 All Rights Reserved
Figure 22: EQDP-014-39.37-TTR-SEU-1 FEXT Short Path
Figure 23: EQDP-014-39.37-TTR-SEU-1 FEXT Long Path
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 17 All Rights Reserved
Figure 24: EQDP-014-39.37-TTR-STL-1 FEXT Short Path
Figure 25: EQDP-014-39.37-TTR-STL-1 FEXT Long Path
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 18 All Rights Reserved
Test Procedures
Fixturing: All measurements were performed using the Final Inch™ test boards. The test boards have trace lengths of 3.780 inches and provide for the interconnection to the EQDP cable by use of replaceable SMA connectors. A separate Final Inch™ test board, SMA_TEST_STRIP Rev 2, had a THRU reference trace pair. Figure 26 below shows how the THRU reference trace pair was utilized to compensate for the losses due to the coaxial test cables, SMA launches, and the test board traces during testing.
Figure 26: Test setup for Thru Reference Acquisition
Measurements were then performed using the test boards as shown in Figure 27. A picture of the test board and cable is shown in Figure 28.
Figure 27: Characterization test setup
SMA Launches
Coax Cable Coax Cable
Reference trace
TDT TDR
Tektronix 11801BSD26Ch3, Ch4
Tektronix 11801BSD24Ch1, Ch2
Tektronix 11801BSD26Ch3, Ch4
Tektronix 11801BSD24Ch1, Ch2
Coax Cable Cable under test Coax Cable
SMA Launches
TDT TDR
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 19 All Rights Reserved
Figure 28: Test setup with Test PCBs and EQDP cable.
The cable terminations had a particular S & G configuration. The respective signal line numbers are shown in Table 6 below (there are a total of 20 positions per row). All adjacent lines are terminated where applicable. There is a ground strip between rows of differential pairs. 1 3 7 9 13 15 19 21 25 27 31 33 37 39
GROUND BLADE 2 4 8 10 14 16 20 22 26 28 32 34 38 40
Table 6: Grounding scheme and respective signal line numbers
Table 7 below shows the signal line numbers corresponding to the short and long paths for the different configurations tested.
Path Assembly Long Short
TEU-SEU-1 J1-J3 J19-J21 TTR-SEU-1 J1-J3 J19-J21 TTR-STL-1 J1-J3 J19-J21
Table 7: Long Path and Short Path Signal Line Numbers
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 20 All Rights Reserved
Time Domain Testing
Impedance: The Tektronix 11801B oscilloscope was set up in TDR (time domain reflectometry) mode using a 100-pS filtered risetime and 16 averages. The horizontal setup of the TDR used 512 point record length and a horizontal scale of 200 pS/div to allow the near end connector and a portion of the cable to be displayed. All impedance measurements were made at the near-end connector and 200 pS into the cable.
Propagation Delay: The propagation delay was measured and skew calculated by first acquiring a thru reference pulse of the reference trace pair. Using the delay function of the TDR, set at 50% amplitude of the reference pulse, the sample was inserted and the sample delay was measured. The TDR delay function calculates the sample delay by subtracting the delay measurement of the reference pulse from the delay measurement of the sample plus the test board traces.
Skew: Skew is defined as the difference between of the propagation delays of the longest (maximum delay) and the shortest (minimum delay) electrical paths.
NEXT and FEXT: Near end crosstalk (NEXT) and far end crosstalk (FEXT) measurements were made using the Tektronix 11801B oscilloscope. A thru reference of the coaxial test cables, SMAs, and reference board was performed to determine the pulse amplitude of the TDR generator (see Figure 26). To acquire NEXT, a signal was applied using the oscilloscope pulse generator. NEXT was measured on an adjacent signal line pair at the near end (see Figure 29). To acquire FEXT, a trace pair was driven with the oscilloscope pulse generator. FEXT was measured on an adjacent trace pair at the far end (see Figure 30). All adjacent line pairs were terminated, at both ends, with 50Ω SMA loads; refer to Figures 29 and 30.
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 21 All Rights Reserved
Frequency Domain Testing All frequency domain measurements were made using the Tektronix 11801B oscilloscope. Testing was performed using a risetime of 35 pS. The horizontal scale was set to 5 nS/div, the record length was set to 5120 points and the number of averages was set to 128. These values were selected to ensure the ratio between the number of points and the window length was long enough to capture the highest frequencies and still yield a small enough frequency step to gain adequate resolution. End 1 of the assembly was the source end for all the frequency domain measurements. All adjacent line pairs were terminated at both ends with 50Ω SMA loads; refer to Figures 29 and 30. Attenuation: Insertion Loss test setup losses were compensated for by acquiring a thru measurement (reference output pulse) of the coaxial test cables, SMAs, and the reference trace pair (see Figure 26 on page 20). A thru measurement of an assembly was taken and then post processed by using Tektronix IConnect® software. The result is the insertion loss of the cable assembly. Return Loss: An open circuit reference measurement was taken using a signal trace on a test fixture board without mating connector to the cable assembly. A matched reflection waveform of the cable assembly, i.e. with the cable assembly terminated in 50-Ω SMA loads on the far end test board, was acquired and then post processed by using Tektronix IConnect® software. The result is the return loss of the cable assembly. Near and Far End Crosstalk: NEXT and FEXT were measured in the time domain using the oscilloscope and then converted to frequency domain data using Tektronix IConnect® software. Initially a thru reference measurement of the coaxial test cables, SMAs, and reference board trace pair was performed to compensate for the test setup losses (see Figure 26 on page 20). To acquire NEXT a trace pair was driven using the oscilloscope pulse generator. NEXT was measured, in the time domain, on an adjacent trace pair (see Figure 29, page 24). NEXT was then post processed using Tektronix’s IConnect® software to generate the NEXT of the cable assembly in the frequency domain. To acquire FEXT a trace pair was driven using the oscilloscope pulse generator. FEXT was measured in the time domain on an adjacent trace pair at the far end (see Figure 30, page 24). FEXT was then post processed using Tektronix’s IConnect® software to generate the FEXT of the cable assembly in the frequency domain.
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 22 All Rights Reserved
Figure 29: NEXT Measurement Setup.
Figure 30: FEXT Measurement Setup
SMAs
NEXT test FEXT test
EQDP sample
Ch1, Ch2
Ch3, Ch4
Tektronix 11801B
Tektronix 11801B SD26 Ch3, Ch4
Tektronix 11801B SD24 Ch1, Ch2
Coax EQDP Sample Coax
SMA Launches
TDT TDR
- 50 Ω Termination
- 50 Ω Termination
High Speed Characterization Report Series: EQDP Description: High-Speed Twin-Ax Cable Assembly, 0.8mm Pitch
Samtec Inc. WWW.SAMTEC.COM Phone: 812-944-6733 520 Park East Blvd. 1-800-SAMTEC-9 (US & Canada) Fax: 812-948-5047 New Albany IN 47151-1147 USA [email protected] Report Revision: 3/6/2007 ©Samtec, Inc. 2005 Page: 23 All Rights Reserved
Equipment
Time Domain Testing Tektronix 11801B Oscilloscope Tektronix SD24 TDR/Sampling Head Tektronix SD26 Sampling Head