high efficiency wood chips making machine/wood chipper/wood chipping machine
TRANSCRIPT
ZHANGQIUYULONGMACHINECO., LTDEMAIL: [email protected] M.P:86-15662714581
Website:www.yulongjixie.orgwww.woodpelletmill.net
ZHANGQIUYULONGMACHINECO., LTDEMAIL: [email protected] M.P:86-15662714581
Website:www.yulongjixie.orgwww.woodpelletmill.net
“Yulong” brand PX Disc Wood chipper is mainly used to crush raw wood logs
into 1-3cm wood chips, the thickness of last chips is 1.5mm-3mm, length and
width is 10-30mm.
It also can cut long bamboo or sugarcane into small chips, the difference
between drum chipper is that after crushed by disc wood chipper, the outlet
chip dimension is more even.
The disc wood chipper has two feeding type: one is to feed logs from
top ,second is to feed from side belt conveyor—changeable speed feeding
logs. For outlet discharging chips type , there are two ways , one is the outlet
is from the other top door, the other is the outlet is from bottom, both structure
and operating are very easy.
It can be driven by both diesel engine and electric motor, very easy to be
operated.
PX series disc chippers produce a high yield, uniform chip quality with low
capital investment and low maintenance cost, it is available as a residual
chipper or whole log chipper, mainly for round logs.
Depending on the feed material, the chippers are available with vertical or
slanted discs.
The material is horizontally fed into the heavy disc which is equipped with
knives.
The cut is performed between the vertical rotor knives and the counter knives.
ZHANGQIUYULONGMACHINECO., LTDEMAIL: [email protected] M.P:86-15662714581
Website:www.yulongjixie.orgwww.woodpelletmill.net
The chips are discharged to below. For short feed material, the disc chipper is
designed with a slanted feeding device
Specifications:
Model PX15-80 PX35-160 PX45-250
Feeder Size(mm) 230×500 300×380 450×800
Max Dia
infeed(mm)150 350 450
Main Power(kw) 30 55 90-110
Knife(pcs) 3 6 9
Chips size(mm) 10-30 10-30 10-30
Capacity(T/H) 1-2 2-4 6-8
Applications:
Disc Wood chipper
is mainly used to cut wood logs, branch into small wood chips.
The thickness of last chips is 1.5mm-3mm,length and width is 10-30mm.
Competitive Advantage:
Stainless steel plate ,corrosion resistance,less stick material,easy toclean,simple structure ,easy operation ,high products practical,efficiency highoverload capacity, low noise, reliable structure ,beautiful appearance,easyadaptability,durable safe,durable firm