PAGE-002B

High

Pressure

Solutions

PARKER / PAGE International Hose 801 Airway Drive, Suite B, Fort Worth, Texas 76106 www.pageintl.comPhone: 817.625.0076 Toll Free 800.847.7280 Fax: 817.625.1901 Toll Free 888.293.2667 email: page@parker.com

Hydraulic systems seem to get more and more demanding each day. Operating temperatures are on the rise. Synthetic hydraulic fluids are more in demand and space is becoming more limited. Hose assemblies are required that can endure all of these conditions, yet handle high working pressures while maintaining peak flow rates. PARKER/PAGE MaxPac™ High PSI hose assemblies answer the challenge, delivering quality performance under these demanding circumstances.

PARKER/PAGE MaxPac™ High PSI assemblies have a heavy wall of PTFE that is compatible with virtually all hydraulic fluids on the market. The PTFE tube has a static dissipating liner that provides a path of continuity to the end fittings for applications where flow induced electrostatic charges could occur and potentially damage the hose assembly. The resilient PTFE tube is reinforced with braided SS 304 wire. Braiding, as opposed to spiraling, allows for better flexibility and a tighter bend radius in the finished hose while maintaining high continuous working pressures. The stainless steel wire also minimizes volumetric expansion in hydraulic service.

When stainless steel female JIC hose ends are attached, the result is a hose assembly that thrives in tough applications such as:

Reaction injection molding (RIM) of plasticsPigtails for filling compressed gas cylindersWater blasting and other high pressure cleaning applicationsHigh temperature hydraulic lines on heavy equipmentPhosphate ester driven hydraulic systems in steel millsAirless paint spray systemsTo convey paint, varnish, lacquer, urethane, steam, water or compressed gases and almost any other media

•••••••

Temperature Range: -65oF to +400oF (-54oC to +204oC)

Maximum Assembly Length: 25 feet

Hose Ends: Crimp collars and JIC swivel nuts are 300 series Stainless Steel Wetted JIC inserts are 316 series Stainless Steel Proof tested at twice the rated working pressure

Specifications

High Pressure Stainless Steel Hoses

PARKER/PAGE MaxPac™ High Pressure Stainless Steel Braided PTFE Hose is rated

for pressures up to 5,000 PSI

PARKER / PAGE International Hose 801 Airway Drive, Suite B, Fort Worth, Texas 76106 www.pageintl.comPhone: 817.625.0076 Toll Free 800.847.7280 Fax: 817.625.1901 Toll Free 888.293.2667 email: page@parker.com

Assembly Part Numbering:

Base Part #: X _ _ W68S68S0 - _ _ _ _

Substitute _ _ after X for Hose Size and _ _ _ _ at the end for assembly length

Example: X08W68S68S0-0120 = 1/2”-08 Hose Assembly w/Stainless Steel Female JIC 370 Swivels 120 inches long

Hose Hose ID

Hose OD

Work Pressure

Work Pressure

Min. Burst

Min. Bend Radius

Female JIC

Dash Size Inches Inches PSI @72oF PSI @400oF PSI @72oF Inches Thread Size

(MM) (MM) (Bars @22oC) (Bars @204oC) (Bars @22oC) (MM)

- 04 0.220 0.375 5,000 3,000 16,000 1.5 7 / 16 - 20

(5.59) (9.53) (340) (204) (1088) (38.1)

- 06 0.313 0.485 5,000 3,000 16,000 2.50 9 / 16 - 18

(7.95) (12.32) (340) (204) (1088) (63.5)

- 08 0.406 0.615 5,000 3,000 16,000 2.9 3 / 4 - 16

(10.31) (15.62) (340) (204) (1088) (73.7)

- 10 0.500 0.740 5,000 3,000 16,000 3.3 7 / 8 - 14

(12.70) (18.80) (340) (204) (1088) (83.8)

- 12 0.625 0.970 5,000 3,000 16,000 4.0 1 1 / 16 - 12

(15.88) (24.64) (340) (204) (1088) (101.6)

- 16 0.875 1.295 5,000 3,000 16,000 5.0 1 5 / 16 - 12

(22.23) (32.89) (340) (204) (1088) (127.0)

- 20 1.125 1.600 5,000 3,000 16,000 12.00 1 5 / 8 - 12

(28.58) (40.64) (340) (204) (1088) (304.8

- 24 1.375 1.850 4,000 3,000 12,000 14.0 1 7 / 8 - 12

(34.93) (46.99) (272) (204) (816) (355.6)

1 See chemical resistance chart or contact PARKER/PAGE International Sales for specific material compatability

2 Operating pressures shown are for non-impulse service. Reduce operating pressures by 1,000 PSI for pump discharge and similar impulse service applications.

3 High termperature burst pressure (@400oF) = minimum burst PSI @ 72oF x .75

Hose Specifications