high speed jet spindle angle-head · 2019. 9. 16. · spinjet special feature the high speed jet...
TRANSCRIPT
Precision meets Motion
HIGH SPEED JET SPINDLE ANGLE-HEAD
SpinJet.
Precision meets Motion
EWS Weigele GmbH & Co. KG · Maybachstr. 1 · D-73066 Uhingen · Tel. +49(0)7161-93040-0 · Fax +49(0)7161-93040-30 · [email protected] · www.ews-tools.de EWS Weigele GmbH & Co. KG · Maybachstr. 1 · D-73066 Uhingen · Tel. +49(0)7161-93040-0 · Fax +49(0)7161-93040-30 · [email protected] · www.ews-tools.de
HIGH SPEED JET SPINDLE ANGLE-HEAD
Advantages
All the advantages of high speed machining + the increased flexibility of an angle-head alignment:
Greater accessibility in hard to reach places
Extended capabilities for turret mount lathe machines
The Jet Spindle’s high rigidity and low run-out
An angle-head configuration significantly cuts production time by enabling both horizontal and angular milling and drilling with no need to reposition the work piece.
High Speed Jet Spindle + Small Cutting Tools + Rego-Fix ClampingIdeal for producing accurate parts for demanding industries:
All the advantages of high speed machining + the increased flexibility of an angle-head alignment:
The coolant-powered high speed Jet Spindle in anAngle Head 30O configuration gives you…
SpinJet.
Special Feature
The high speed Jet Spindle is equipped with a real-time, wireless RPM monitor and display system for these exclusive benefits:
Optimum performance and constant speed
Alerts to avoid tool wear or spindle overload
Pre-programmable parameters
RPM tracking and display for multiple Jet Spindles
+ +
EWS Weigele GmbH & Co. KG · Maybachstr. 1 · D-73066 Uhingen · Tel. +49(0)7161-93040-0 · Fax +49(0)7161-93040-30 · [email protected] · www.ews-tools.de
Precision meets Motion
Recommended Operating Conditions High speed Jet Spindle
Coolant pressure [bar] 20 - 70
Rotational spindle speed [Krpm] 25 - 45
Optimum cutting tool diameter [mm] drilling 0.5 - 3.0
Optimum cutting tool diameter [mm] milling 0.3 - 4.0
Max output power [Kw] 1.5
Adaptor BMT55
Coolant flow rate [l/min] 16
HIGH SPEED JET SPINDLE ANGLE-HEAD
Coolant pressure is measured from the spindle inlet
Rotational spindle speed is based on coolant pressure flow rate and may vary up to 7%
SpinJet.
Live tool mountable on the lathe turret – can increase cutting speed capability up to 10 times.
Coolant powered spindle operation – no external feed lines necessary!
Schematic
EWS Weigele GmbH & Co. KGMaybachstraße 1 · D-73066 UhingenTelefon +49(0)7161-93040-100Telefax +49(0)7161-93040-30E-Mail: [email protected] www.ews-tools.de
WSW Spannwerkzeuge-Vertriebs GmbH Maybachstr. 1 · D-73066 Uhingen Telefon +49(0)7161-93040-100 Telefax +49(0)7161-93040-30 E-Mail: [email protected] www.wsw-collets.de
Command Tooling Systems13931 Sunfish Lake Blvd NWRamsey · MN 55303 USA Telefon +1-763-576-6910Telefax +1-763-576-6911 [email protected] www.commandtool.com
EWS Korea Co. Ltd.60-11 · Woongnam-DongChangwon Kyoung-Nam KoreaTelefon +82 55-267-8085Telefax +82 55-262-3118 E-Mail: [email protected]
EWS Ltd.Krassnaja str., 38 600015 VladimirRusslandTelefon +7-4922-541160Telefax +7-4922-541160 E-Mail: [email protected]
EWS Tool Holder Technologies (Taicang) Co. LtdBeijing East Road No. 88 215400 Taicang · JiangsuP. R. ChinaTelefon +86 512 3306 2600 Telefax +86 512 3306 2601 E-Mail: sales.cnews-tools.dewww.ews-tools.cn
Stand: 09/2019