high-speed spindles
TRANSCRIPT
Powered by the
See Machining from a New Angle
benztooling.com/metalspeeders
Tooling Systems for Machining Centers
High-Speed Spindles
Powered by the
See Machining from a New Angle
benztooling.com/metalspeeders
High-Speed Spindle Types
Type SL: with Jacket Cooling
Type SLI: with Internal Cooling
• Increase Speed in Use By the 1000‘s / Ratio 1:5
• Offers Solutions for All Applications Where the Existing Machine RPM and the Resulting Cutting Speed Do Not Allow for Economical Production
Powered by the
See Machining from a New Angle
benztooling.com/metalspeeders
Specifications
• With Ceramic Bearing for High-Speed Cutting
• Revolutions up to 40,000 RPM (With Coolant)
• Revolutions up to 18,000 RPM (Without Coolant)
• Coolant Pressure up to 80 Bar
• Especially Suitable for Precise Machining
• Primary Application is Drilling
• High Flexibility Due to Exchangeable Torque Arm
• All Types of High-Speed Spindles Produced Standard with Jacket Cooling. This Reduces Operating Temperature and Results in Consistent Operating Parameters
• Wide Range of Standard Models
Powered by the
See Machining from a New Angle
benztooling.com/metalspeeders
HSS Application
• Primarly Designed for High-Speed Drilling
• Slight Millworking without Any Specific Surface Hardness
Must Observe Limited Duty CycleHigh-Speed Spindles Can Not Be Run Continously without Time for the Bearings
to Cool. Maximum Duty is 10 Minutes Running and 10 Minutes Cooling. Running
Outside of These Parameters Will Deteriorate Life Expectancy of the Speeder.
Powered by the
See Machining from a New Angle
benztooling.com/metalspeeders
HSS Tool Change
• Can Be Automatically Tool Changed through Machine Tool Changer or Manually Tool Changed
• For Automatic Tool Change Applications, a Stop Block Must Be Purchased and Installed to Keep Torque Arm from Rotating
• Manual Tool Changed Speeders Require a Block or Pin to Secure the Hand Torque Arm from Rotating
Powered by the
See Machining from a New Angle
benztooling.com/metalspeeders
HSS / Technical: Design
High-Speed Spindle:Complete with Drive Taper. The Spindle Is Produced Standard with ER DIN6499. Other Designs through Request.
Torque Arm:Holds the Spindle in Position/ Avoids the Twisting. Available in Machine Specific Design*, or in Benz Standard.
*Exact and detailed machine connection data from customer side are necessary.
Machine Connection:Different Designs Possible: HSK, SK, BT, CAT…
Hand Torque Arm:Is Used by Manual Tool Change
Powered by the
See Machining from a New Angle
benztooling.com/metalspeeders
SLS | Technical: Cut Away View
Powered by the
See Machining from a New Angle
benztooling.com/metalspeeders
High-Speed Spindle – Unlimited Duty
• 40,000 RPM High-Speed Spindles for
Machining Centers• Unlimited Duty Cycle • Self-Cooling• Coolant Through the Tool is Available as
an Option• Primary Application – Drilling • Increased Milling Capabilities• Less Vibration• Increased Surface Finish • Capable of Running Ceramic End Mills• HSK, CAT40 & CAT50 Available
Powered by the
See Machining from a New Angle
benztooling.com/metalspeeders
Contact Us Directly For Questions
Rapid Turnaround to Minimize Downtime• BENZ Inc.’s Standard Repair Service
Turnaround is Two Weeks
• Choose Expedite Service to Replace
Worn or Damaged Tools within 72 hours
• Preventive Maintenance Program is
Available to Minimize Unscheduled Downtime
• One-Year Warranty on all Repairs
BENZ Inc. 704.529.5300
www.benztooling.com
8325 J Arrowridge Blvd.
Charlotte, NC 28273
Powered by the
See Machining from a New Angle
benztooling.com/metalspeeders
For More Information Regarding
BENZ High-Speed Spindles,Call 704-529-5300