highbay led-ready project: six lamp positions catalog#: four … · 2019. 1. 31. · specification...
TRANSCRIPT
HFA3 LED-ReadySpecification Sheet
Project:
Catalog#:
Approved by:
Highbay LED-ReadySix Lamp PositionsFour Foot - Curved Profile Design Lamps NOT Included
Specifications subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Page 1 of 2Rev: 1/29/2019
Features• No ballast installed• Includes shunted and non-shunted T8 lamp holder so they
are compatible with single-ended and double-ended 4’ LED tubes (Type B)
• Easy access to wiring compartment• Access plate provides access to electrical wiring with-out
the need to open the fixture• Knock-outs for easy electrical wiring and assembly• Heavy Duty pre-painted steel construction• Can be easily mounted by a single person• Suspended mounting insures a quick painless install• Chain and V-Clip Hanging option• Standard specular aluminum reflector (86%)• Wire cable hanging option.
DescriptionThe HFA3-LED Ready series high-bays are a great retrofit LED ready alternative to traditional HID highbay and fluorescent fixtures. This fixture uses 6 line voltage 4’ LED lamps (Type B).
ApplicationsWarehouse Gymnasium
Manufacturing Facility Cafeteria
Auditorium
Benefits• Energy Saving Compared to HID systems• Quality Lamp holders• Computer Designed Reflectors
Ordering InformationModel No. of Lamp Positions** Reflector (L)
Length(W)
Width(H)
Height
HFA3A6LT8 6 Standard SpecularAluminum (86%) 48” 16.23” 3.6”
ProudlyDesigned & Assembled
IN THE USA*
**Lamps Not Included*Foreign and domestic components.
Pendant Mount lances included only ifFactory Installed Option “J” is selected.
3.6”
16.23”
48”
Rigid heavy gage prepainted steel body
Contractor friendly onescrew access to electricalconnections through thisaccess plate removablefrom the outside
Hinged reflector/socket barassembly for easy two screwaccess to the ballast compartment
Factory Installed Option JPendant Mount Kit (PMK2) installs from theoutside: no need to open the fixture
Wire Cable Hanging mounting option (WCH)
Chain and V-Clip mounting option (CV)Six 3/4” knockouts for easy wiring access4 on top and one on each end provides cleanmounting for occupancy sensor
Curved design for better light distribution
Compatible with F32T8/8xx/LED/16W/AC & F32T8/8xxLED/12.5W/AC Linear LED Lamps
click image for spec sheets
LAMPS NOT INCLUDED
HFA3 LED-ReadySpecification Sheet
Specifications subject to change without notice.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Page 2 of 2Rev: 1/29/2019
Accessories - Sold Separately
HFA3-WGWire Guard
HFA-WCHWire Cable Hanging Kit
(2 pcs per kit)
HF-2CV (2 foot)HF-3CV (3 foot)
Hanging Chain & V-clips
HF-SK1Stabilizer Kit
(Hub, color and wire cable)
HFA3-WLWrap Lens
(Can be used with wire guard)
HF-PMK2Pendant Mount Kit
with 1.0” diameter through hole