hilevel cad module gap analysis document for ref
TRANSCRIPT
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
1/36
TARGET
TO CREATE LINES 1
2
3
4
5
6
7
TO EDIT LINE 1
2
3
4
5
6
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
2/36
7
TO CREATE
CIRCLE1
2
3
TO CREATE
SURFACES1
2
3
4
5
TO EDIT SURFACE 1
2
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
3/36
3
4
5
6
7
8
TO EXTRACT
MIDSURFACE1
DEFEATURE 1
2
3
4
5
TO CREATE
SOLIDS1
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
4/36
2
3
4
5
TO EDIT SOLID 1
2
3
4
5
6
TO EDIT EDGE 1
2
3
4
5
6
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
5/36
7
TO EDIT POINT 1
2
3
4
5
6
QUICK EDIT 1
TO TRANSLATE
TO PROJECT
-to plane
-to vector
-to surface
-to line
TO ROTATE
TO REFLECT
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
6/36
TO POSITION
TO ALIGNNORMALS
TO MASK
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
7/36
METHODS INPUT
From Nodes Nodes
By Offset Lines
From surface edges surfaces
From features FE data
At intersectionsurfs/plane, surfs/surfs,
elems/surfs and lines/plane
At tangent Node
At fillet Lines
TO COMBINE TWO LINES.
TO SPLIT LINES AT AN ARBITRARY POINT
TO SPLIT LINES AT JOINT
TO SPLIT AT LINES AT LINE.
TO SPLIT AT PLANE AT PLANE.
TO SMOOTH A LINE
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
8/36
TO EXTEND A LINE
center and radius Center
Points and vector Nodes
Three points Three nodes
Ruled Nodes
Spline/Filler lines or surface edges
Nodes
Points
Skin Lines
Drag/spin
-Along vector Nodes (or) Lines
-Along line Nodes and Line
-Spin Nodes (or) Lines
Fillet Lines
TO TRIM (SPLIT) A SURFACE USING NODE
TO TRIM (SPLIT) A SURFACE USING LINE.
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
9/36
TO TRIM A SURFACE WITH SURFACE / PLANE.
TO UNTRIM A SURFACE
TO OFFSET A SURFACE
TO EXTEND A SURFACE
TO SHRINK A SURFACE
AUTOCLEANUP
MIDSURFACE surfaces
Pinholes Surfaces
Surface fillets surfaces
Edge fillets surfaces
Duplicates surfaces
symmetry surfaces
From bounding surfaces Surfaces
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
10/36
Drag along vector surfaces
Drag along normal surfaces
Drag along line surfaces and line
Spin surfaces
TO TRIM (SPLIT) A SOLID USING NODE
TO TRIM (SPLIT) A SOLID USING LINE.
TO TRIM A SOLID WITH SURFACE / PLANE.
TO MERGE (COMBINE) SOLIDS
TO DETACH SOLIDS
BOOLEAN.
TO TOGGLE A EDGE
TO (UN)SUPPRESS
TO REPLACE EDGES.
TO EQUIVALENCE .
TO UNSPLIT EDGES.
EDGE FILLET
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
11/36
BY FEATURE
TO ADD A POINT
TO SUPPRESS ( REMOVE)
TO REPLACE
TO RELEASE A POINT.
TO PROJECT A POINT.
TO TRANSLATE
WASHER SPLIT
Surfaces,nodes or lines
Nodes,lines or points
Nodes,lines or points
Nodes,lines or points
Nodes,points
Nodes,lines,surfaces or points
Nodes,lines,surfaces or points
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
12/36
Nodes,lines,surfaces or points
surface, solid
Lines, solids,surfaces
MOUSE LEFT BUTTON-TO SELECT AN ENTITY, MOUSERIGHT BUTTON-TO DESELECT AN ENTITY, MOUSE
SCROLL BUTTON-TO EXECUTE THE COMMAND
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
13/36
ENTITY SELECTION PROCESS
By path
By list
By window
Show node order
1. Offset by midline
2.offset by certain distance
Pick the surface edgessurfaces
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By list,By window, By path
pick the line
a. BY SELECT POINT ON LINES.
a. BY SELECTING A POINT ON LINE.
a. SPLIT AT JOINING POINT.
a. SPLITTING AT INTERSECTION.
a. BY SELECTING AXIS AND BASE POINT
b. BY SELECTING PLANE AND BASE POINT.
c. BY SELECTING VECTOR AND BASE POINT.
a. SELECTING LINE WITH TOLERANCE
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
14/36
b. SMOOTHING AT CORNERS WITH MIN TANGENT ANGLE
a. SELECTING THE POINT WITH REQUIRED DISTANCE.
By list,By window
By list,By window
By list,By window
By path
By list
By window
Show node order
By window,dispalyed,by collector,on plane,By adjacent,By geomery.
By path,by window,list
By path,by window,list
By window,dispalyed,by collector,on plane,By adjacent,By geomery.
By list,By window, By path
By list,By window, By path
By list,By window, By path
by window, by geometry
a. WITH TWO NODES.
b. WITH MUILTPLE NODES.
c. NODES NORMAL TO EDGE.
a. WITH CUT LINE BY DRAGING.
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
15/36
b. WITH A LINE NORMAL TO SURFACE.
c. BY OFFSETING EXITING LINE TO REQUIRED DISTANCE.
a. BY SELECTING PLANE AND BASE POINT.
b. SPLITTING AT INTERSECTION OF TWO SURFACE.
a. PICK THE SURFACE
b. ALL TRIM LINES OF A SURFACE
a. CONTINUOUS METHOD
b. DISCONTINUOUS METHOD.
a. WITH DISTANCEb. WITH LINE OR EDGE
a. SURFACE WITH OFFSET VALUE.
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
16/36
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
a. BY SELECTING A SOLID AND NODES.
b. BY SELECTINF A SOLID AND POINTS.
a. WITH CUT LINE BY DRAGGING.
b. WITH BOUNDARY LINE.
c. WITH SWEEP LINE.
a. BY SELECTING PLANE AND BASE POINT.
b. SPLITTING AT INTERSECTION.
a. MERGE
a. TO DETACH
a. SIMPLE ( A+B, A*B, A-B, {A-B, B} ).
b. ADVANCE ( A+B, A*B, A-B, A^B, A )
a. PICK THE EDGES.
a. SELECTING LINES.
a. SELECTING LINES.
a. SELECTING SURFACE.
a. AT CURSOR POINT.
a. SELECTING SURFACE.
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
17/36
a. SELECTING SURFACE.
a. PICK THE POINTS.
b. AT EDGES
c. ON SURFACE.
a. PICK THE POINTS.
b. MULTIPLE POINTS.
a. PICK THE POINTS.
a. PICK THE POINTS.
a. POINT TO EDGE
b. POINT TO SURFACE
c. INTERNAL POINT TO SURFACE.
a. SELECTING LINE AND OFFSET VALUE.
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
18/36
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
By window,dispalyed,by collector,on plane,By adjacent,By geomery,by attached,by face
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
19/36
DESCRIPTION
Select the first and last nodes of the required series of nodes
Select all the nodes required in sequence
Draw a window covering the required nodes
displays the order of nodes in the sequence by which it has been
selected
Select the two lines whose midline is required
select a line and specify the offset distance
select the edge of a individual surface to create lineselect a group of surfaces
select the required elements
Select any pair of intersecting entitites
To create lines at the tangent of a node to an existing line
To create lines forming fillets between two intersecting lines
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
20/36
pick the center and specify the radius
Pick the point and specify the direction
Pick the 3 points on the circumference of the circle
Select the first and last nodes of the two node sets between whom
surface is to be created
Select the nodes individually in both node sets in sequence and in an
identical order.
Select the nodes of the two node sets by drawing a window around
displays the order of nodes in the sequence by which it has been
selected
Create surfaces by selecting lines or surface edges to fill gaps.
Create surfaces by selecting an enclosed set of nodes
Create surfaces by selecting an enclosed set of points
Create surface by selecting nodes and dragging along a vector
direction
Create surface by selecting nodes and dragging along a line
create surfaces by rotating nodes or lines about a vector axis
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
21/36
Create a surface in the middle of the selected surfaces.
Finds and removes pinholes within a specified value of diameter
Finds and removes surface fillets within a specified range of radius
Finds and removes edge fillets within a specified range of radius
Finds and deletes duplicates layers with respect to the specified
cleanup tolerance value
Used to find the presence of symmetric surfaces with respect to an
axis and a base point.
Create soilds by selecting the boundary surfaces
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
22/36
create solids by dragging surfaces along a vector direction
create solids by dragging surfaces along their normal direction by
specifying the distance
create solids by dragging surfaces along a line
create solids by rotating surfaces about a vector axis
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
23/36
Nodes,lines or surfaces can be translated along a vector axis for
desirable magnitude.
nodes,lines or points can be projected to a desired plane along a
vector axis
nodes,lines or points can be projected to a desired vector along an
axis
nodes,lines or points can be projected to a surface along an axis
nodes or points can be projected to a line along an axis
nodes,lines,surfaces or points can be rotated around an axis in space
It is used to reflect portions of a model about a plane, changing the
selected portion into a mirror image of itself.
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
24/36
It is used to specify a new position for model entities.Changing
position is accomplished by picking six nodes that define a
transformation for the selected entities: three nodes represent the
entities starting position, and three corresponding nodes define the
selected entities ending position.
to display the normals of selected components
to mask(hide) the desired components
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
25/36
MOUSE FUNCTIONS (GENERAL)
LEFT BUTTON-TO SELECT AN ENTITY,RIGHT BUTTON-TO DESELECT AN ENTITY,SCROLL BUTTON-TO EXECUTE THE
COMMAND
LEFT CLICK THE POINTS TO BE COMBINED.
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
26/36
BY LEFT CLICKING AT REQIRED AREA OR BY EXITING NODES
BY LEFT CLICKING AT REQIRED AREA OR BY EXITING NODES
LEFT CLICK MOUSE AND DRAGING
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
27/36
LEFT CLICK MOUSE AT REQIRED BASE POINT.
LEFT CLICK THE TRIMMED SURFACE TO UNTRIM
LEFT CLICK THE TRIMMED SURFACE TO UNTRIM
LEFT CLICK THE SURFACE AND SEPRATOR LINEWITH OFFSET DISTANCE.
LEFT CLICK THE SURFACE WITH OFFSET DISTANCE.
BY LEFT CLICKING THE SURFACE.BY LEFT CLICKING THE SURFACE.
LEFT CLICK THE SURFACE WITH REQUIRED OFFSET VALUE.
BY LEFT CLICKING THE SURFACE TO PERFORM BASIC AUTOMATIC GEOMENTRY CLEANUP.
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
28/36
LEFT CLICK THE SURFACE AND NODES TO TRIM THE SOLID.
LEFT CLICK MOUSE AND DRAGING
LEFT CLICK THE SURFACE AND BOUNDARY LINE TO SELECT.
LEFT CLICK TH E SURFACE TO SELECT AND SELECT SWEEP LINE TO WHICH THE SOLID TO BE TRIMMED.
LEFT CLICK MOUSE AT REQIRED BASE POINT.
LEFT CLICK TWO SOLID TO BE MERGE (COMBINE).
LEFT CLICK TWO SOLID TO BE DETACHED (SPLIT).
PERFORMS COMPLEX MERGE AND SPLIT FUNCTIONS ON SOLIDS.
PERFORMS COMPLEX MERGE AND SPLIT FUNCTIONS ON SOLIDS.
LEFT CLICK THE EDGE TO BE TOGGLED.
LEFT CLICK THE EDGE TO SUPPRESS OR UN-SUPPRESSES.
REPLACE AN EDGE WITH ANOTHER NEARBY EDGE.
LEFT CLICK EDGES TO COMBINING THE FREE EDGES INTO SHARED EDGES.
LEFT CLICK THE EDGE TO BE UNSPLITTED.
REPLACE THE CURVE AT THE JUNCTION OF TWO NON-COLLINEAR EDGES WITH A STRAIGHT LINE.
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
29/36
COMBINE SURFACES BASED ON FEATURE LINES.
LEFT CLICK AT REQUIRED AREA
LEFT CLICK AT REQUIRED AREA
LEFT CLICK AT REQUIRED AREA
LEFT CLICK REQUIRED POINT TO BE SUPPRESS
LEFT CLICK REQUIRED POINTS TO BE SUPPRESS
LEFT CLICK REQUIRED POINT TO BE REPLACED
LEFT CLICK AT REQUIRED AREA
LEFT CLICK REQUIRED POINT TO BE PROJECTED.
LEFT CLICK REQUIRED POINT TO BE PROJECTED.
LEFT CLICK REQUIRED POINT TO BE PROJECTED.
LEFT CLICKING AT REQUIRED AREA TO TRIM SURFACE , RIGHT SELECT TO UNDO TO PREVIOUS POINT AND
CENTRE CLIK TO TERMINATE THE OPTION
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
30/36
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
31/36
OUTPUT
Line
Line
Line
Line
Line
Line
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
32/36
circle
circle
circle
Surface
Surface
Surface
Surface
Surface
Surface
Surface
Surface
Surface
Surface
Surface
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
33/36
Midsurafce
pinholes removed
Fillets captured
Fillets captured
Removal of duplicatesurfaces
Retrieval of
symmetric surfaces
Solids
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
34/36
Solids
Solids
Solids
Solids
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
35/36
Entity translation
Entity projection
Entity projection
Entity projection
Entity projection
rotation of entities
Reflection of entities
-
7/31/2019 HiLevel Cad Module Gap Analysis Document for Ref
36/36
Position of entities
normals displayed
components masked