hilti anchor selection

Anchor Seminar I Fadi Bachir I Hilti Qatar 1www.hilti.com

Overview of Hilti Anchors

Chemical Anchors

1) RE500 – Foundations, Rebar & Structural applications2) HVU & HVZ Capsules – Piping and Equipment

Mechanical Anchors

1) HSL – dynamic, crack zone applications2) HST – Non dynamic, crack zone applications3) HKD – Standard flush anchor4) HSA – Non dynamic, non-cracked applications


RE500 Epoxy

-Suitable for rebar and structural anchoring applications- Strongest bonding strength of any chemical in the market

(up to 7.1N/mm2) and therefore requires much lower embedment than competing chemicals- Max anchor size of M40.- Cures in 13hours at 20oC and 4hours at 40oC (see catalogue). - Can be used underwater and in wet holes- Mixing nozzle ensures consistent load capacity


HVU and HVZ Resin Capsules

- HVU and HVZ are the only chemical anchors approved for dynamic loads, and are therefore suitable for piping and equipment applications- HVU is for un-cracked concrete and HVZ is for cracked concrete.- HVU has a max size of M39; HVZ has a max size of M20.-HVU and HVZ cure in 20min in temperatures 20oC or higher (see catalogue).-HVU can be used underwater


HSL Heavy Duty Mechanical Anchor

-Dynamic loads and crack zone applications, such as equipment and piping fastening


HST Safety Stud Anchor

-Non-dynamic loads and crack zone applications, such as piping and electrical supports in tensile zones


HSA Standard Stud Anchor

-Non-dynamic loads and non-crack zone applications, such as piping and electrical supports


HKD Standard Flush Anchor

-Non-dynamic loads and non-crack zone applications, such as piping and electrical supports


Hilti PROFIS Application Guide

1) Base Material

1) Base Plate

1) Anchors

1) Section

1) Loads

1) CALCULATE!

1) Specify criteria, if any

If in doubt, contact Hilti


Hilti - Ensuring proper anchor installation on your site

PREVENTION is the key. Proper training results in correct installation the FIRST TIME!

Hilti provides many resources to assist you free-of-charge:

1) Hilti fastening systems are designed for simple installation (mixing nozzles, foil packs, etc)

2) PROFIS installation videos to train the workers should be a standard practice.3) Hilti includes installation instructions and handling procedures in EVERY PACK of

chemical product.4) Hilti technical assistance and training is available on-site.5) Hilti can provide pullout tests on request as a sample of what is on your site.

hilti anchor selection

Documents