hindu institute of technology,...

MANDATORY DISCLOSURE (2020-21)

Hindu Institute of Technology, Sonepat

MANDATORY DISCLOSURE

I. NAME OF THE INSTITUTION

Hindu Institute of Technology, Industrial area, Near Cygnus J.K. Hindu Hospital, Sonepat-131001(Haryana) Phone No: - 0130- 2212156,

2212957, 9467282393

E-Mail Address: [email protected]

II. NAME AND ADDRESS OF THE TRUST/SOCIETY The Sonepat Hindu Educational & Charitable Society,

Hindu Vidyapeeth, Kath Mandi,

Sonepat

III. NAME AND ADDRESS OF THE DIRECTOR

Mr. Gulshan Singla

Hindu Institute of Technology, Industrial Area, Sonepat-131001(Haryana)

Phone No.(Off)- 0130- 2212156, 2212957

Phone No.(Resi)- 9416306251

E-Mail Address: [email protected]

IV. NAME OF THE AFFILIATING BOARD/UNIVERSITY

State Board of Technical Education, Haryana and Approved by AICTE

(ALL INDIA COUNCIL FOR TECHNICAL EDUCATION), New Delhi

1

mailto:[email protected]:[email protected]

V. GOVERNANCE Members of the Board and Advisory Academic Body and their Background:-

Frequency of the Board Meetings and Academic Advisory Body- 3 to 6 Months

Organizational Chart and Process

NAME AND ADDRESS OF THE MEMBERS OF THE GOVERNING BODY AS PER THE COMPOSITION

PRESCRIBED BY AICTE(Society)

S. No

Name

Position

Qualifi-

cation

Present Professiona l position/ Occupation

Telephone

Numbers

E-mail

Address

01

Pawan

Kumar

Gupta

President Graduate Business Man 09896276778 [email protected]

M/s Durga Parsad

Kanwal Singh,34

Anaj

Mandi,Sonepat

02 Mr. Ashok

Garg

Secretary Graduate Business Man 09215338590 [email protected]

H.No.65,Sector-

15,Sonepat

03

Mr. Jai

Kanwar Jain

Tearsurer 10+2 Business Man 9416013089 [email protected]

H.no. 283/24,Kiran

Bhawan,Tirth

Market,Sonepat

VI. PROGRAMMES

Name of the Programmes approved by the AICTE

Computer Engineering

Electrical Engineering

Electronics & Communication Engineering

Civil Engineering

Mechanical Engineering

Name of the Programmes accredited by the AICTE

NIL

Details of each Program

Sr. No Courses No. of

Seats

Duration Fee

(Yearly)

1 Electrical Engg. 60 3 Years 32,190/-

2 Computer Engg. 60 3 Years 32,190/

3 Electronics & Comm.

Engg. 60 3 Years 32,190/

4 Civil Engg. 60 3 Years 32,190/

5 Mechanical Engg. 60 3 Years 32,190/

3

mailto:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]

Note : 10% extra seats will be added for drop out candidates.

VII. Nature and Extent of Involvement of Faculty and Students in Academic affairs/Improvements

The Faculty is fully involved in daily academic activities of students like Providing extra time for their problems, Identifying lagging students and special attention for them, Class tests, Viva’s , Presentations using Multimedia Projectors, Quiz’s.

Student Feedback on Institutional Governance/ Faculty Performance

This is the routine process of the Institution.

4

VIII. PROFILE OF DIRECTOR/PRINCIPAL WITH QUALIFICATIONS, TOTAL EXPERIENCE, AGE AND DURATION OF EMPLOYMENT AT THE

INSTITUTE CONCERNED

Gulshan Singla New Chintpurni Colony , Murthal Road Sonipat – 131001

Mob: -7988160175, 9416306251

Email [email protected]

Objective: I look forward to build my career with Hard Work, Dedication and Devotion to assign job in the field of

Administration.

Work Experience: Associated with Haryana Board of Technical Education for Examination related work since Nov. 2008 and

O/I Examinations at NC Technical Campus from Sept. 2007 to Oct. 2008.

Worked as Question paper-setter of various Universities, Centre-Superintendent/ Deputy Centre Superintendent, Convener of Flying Squad, UMC committee many times.

Presently working as Principal at Hindu Institute of Technology (HIT) (Sonepat) from January 2013. 20 months Experience as Principal at Bhagwan Mahaveer Institute of Polytechnic (BMIP) (Jagdishpur) from

May 2011-Jan.2013

10 months Experience as a Principal at Modish Institute of Polytechnic (MIP) (Punhana) from July2010 - April 2011

20 months Experience as a Principal at L.R. Institute of Technology and Management (LRITM) (Polytechnic) Deeghot (Palwal) from Nov.2008 - June 2010

5 month Experience as an Asstt. Professor at N. C. College of Engg. Israna (Panipat) from June 2008-Oct. 2008. 8 months Experience as Sr. Lecturer at N.C.College of Engg., Israna (Panipat) from Sept.2007-May 2008. 3-years Experience as Lecturer at N.C.College of Engg., Israna (Panipat) from Aug.2004-Aug.2007. 5-1/2 years Experience as Programmer at Govt. Polytechnic for Women Faridabad under Technical Education

Haryana from April 1999-July 2004.

Technical Skills: Languages Visual Basic 6.0

Operating System MS-DOS 6.0, Windows 98, Windows 2000/XP

RDBMS Oracle 8.0, MS-Access,

Package Known MS Office

Educational Qualifications:

Life Time Member of Indian Society For Technical Education (ISTE)

M.Tech Integrated (Computer Science & Engineering) July 1997 from Moscow State Academy of Instrument Engg. and Computer Science with Grade “GOOD” (Under INDO – USSR Scholarship Scheme )

10+2 From Hindu College Sonipat with 72%

Matriculation from Hindu High School Sonipat with Distinction (75.8%).

Job Responsibilities: Admission In-charge at N.C.C.E. and LRITM. Policy planning, monitoring & evaluation both at Departmental and Institutional level.

Plan and Implement Faculty development activities Students Assessment and evaluation including examination work of the Institution. Providing Students with Guidance and Counseling and helping in their personal, ethical moral and

overall character development. Developing, updating and maintaining MIS of the College. Active member of NBA (Computer, 2005 at N.C.C.E.) Active member of NBA (IT, 2006 at N.C.C.E.) Time -Table (2004-2005 at N.C.C.E.) Subject Co-coordinator of Concerned Subject. (N.C.C.E.) Lab –in charge of Visual Programming Lab. (N.C.C.E.) Convener of Faculty Development Program (N.C.C.E.) Convener of Student Counseling (N.C.C.E.) Member of discipline committee(N.C.C.E) Member of purchase committee.(2003-2004) Co-coordinator of Horticultural Deptt. (2000-2002) Conducted Educational Tours. (2001-08) Attended (STC) Twice short Term Courses at TTTI Chandigarh (2001-02) Attended (STC) at HIPA Gurgaon (2003)

Subjects Taught:

Computer Architecture and Organisation , Software Project Management , Fundamental of Computer and Programming in C , Computer Hardware Technologies

Paper Presented:

Attended the 2nd International Conference on “Reliability, Quality and Infocom Technology,” ICRQIT-2006 held on December 02-04, 2006 at Delhi University.

Attended & presented paper on “IT : Solving Problems and Enhancing Performance in Education”, in the national conference on Information Technology and Its Applications at Bharti Vidyapeeth College of Engg., Paschim Vihar

, New Delhi on 13th-14th April 2006

Attended a National Level Seminar on IT in Education- Needs, Concerns, Gaps & Solutions at NCCE, Israna, Panipat on March 25-26, 2006.

Attended and presented paper on “Study of various Image Compression Techniques”, organized by Indian Society of Information Theory & Applications (ISITA) on Information Technology: Setting trends in Modern Era at

NCCE, Israna on March 18-20, 2006.

Attended a national conference on “Challenges for Technology and Management in the Knowledge Millennium” at JIET, Jind on March 2-3, 2006.

Presented Paper on “Lattice-valued finite Automata” in the national conference held at RIMT institute of Engg. And Technology Mandi Govindgarh on 29th March ,2008

Personal Details:

Father’s Name : Sh. Sat Pal Singla

Date Of Birth : 7 May.1972

Martial Status : Married

Languages known: English , Hindi and Russian

IX. FEE

Details of fee, as approved by State fee Committee, for the institution. First

Semester/Third Semester (DET-L)

Tuition Fee 11740.00

Caution Money (Security Fee Refundable) 1500.00

Development Fee 3520.00

Student Fund 1200.00

Additional Charge 1340.00

Examination Fee: 250.00

Counseling Fee 200.00

Prospectus 350.00

Total 20100.00

Second / Fourth / Sixth Semester:



Total 12090.00

Third Semester:






Total 18150.00

Fifth Semester:






Placement Prospects 500.00

Total 18650.00

Total Three Years Fee = 93170.00

Total Two Years Fee = 62930.00

Time schedule for payment of fee for the entire programme

st

Installment (July-August) nd

Installment (January- Feb.)

X. ADMISSION

Number of seats sanctioned with the year of approval

S. No Course(s) Previous Intake Revised Intake Period of Approval

01 Electrical Engg. 39 60 One Year

02 Computer Engg. 39 60 One Year 03 Electronics & Comm. Engg. 30 60 One Year

04 Civil Engg. 39 60 One Year 05 Mechanical Engg. 39 60 One Year

Total 186 300 One Year

XI. ADMISSION PROCEDURE

Mention the admission criteria

Admission is strictly on the basis of D.T.E., Haryana Rules

Distribution of seats for different categories is as per notification of Directorate of Technical Education, Haryana

Calendar for admission against vacant seats is decided by DTE

and all information is given at website www.techeduhry.nic.in

XII. CRITERIA AND WEIGHTAGES FOR ADMISSION

Admission is strictly on the basis of D.E.T. instructions and if seats still remains vacant admission will be made on the basis of merit of qualifying exam (10th or 12th (PCM) or ITI (2 years).

1

2

http://www.techeduhry.nic.in/

XIII-XIV APPLICATION FORM (for Applicants)

10

XV. INFORMATION ON INFRASTRUCTURE AND OTHER RESOURCES AVAILABLE

LIBRARY:

S.N o

Course(s)

Number of

titles of the

books

Number of volumes

Journals

National International

1. Electrical Engg. 340 2740 02 --

2. Computer Engg. 412 3640 03 --

3. Inst. & Control Engg 125 1300 -- --

4. Electronics &

Comm. Engg

578 4430 02 --

5. Applied Science 156 3535 -- --

6. Mechanical Engg. 446 3620 03 --

General Books 22 -- --

12

LABORATORY:

(Name of Major Labs & Equipment)

Chemistry Lab

S.N. Name of Items

1 Measuring Cylinder 25 ml

2 Measuring Cylinder 50 ml

3 Abel's Flash Point Apparatus

4 Measuring Flask 100 ml

5 Measuring Flask250 ml

6 Measuring flask 500 ml

7 Measuring Flask 1000 ml

8 Test Tubes

9 KOH

10 Filter Paper

11 Bunsen burner

12 LPG Cylinders

13 CuSO4

14 Dropper

15 Conc. H2SO4

16 pH meter

17 Test Tube Holder

18 Oxalic Acid

19 Test Tube Stand

20 Na2CO3

21 Phenolphthalene

22 HCl

23 NaOH

24 Acetic Acid

25 Acetyl Chloride

26 Redwood Viscometer

13

27 Electric Balance

28 Large Tong

29 Small Tong

30 Dessicator 6"

31 China Dish

32 Stop Watch Digital

33 Thermometer

34 Glass Rod

35 Glass Funnel

36 Wire Guaze

37 Tripod Stand

38 Burette 50 ml

39 Pipette

40 Beaker 500 ml

41 Beaker250 ml

42 Beaker 100 ml

43 Titration Flask 250 ml

44 Muffle Furnace

45 NH3 Solution

46 Distilled Water

47 Starch

48 KI

49 Kerosene Oil

50 NH4Cl

51 Benzoic Acid

52 Methyl Orange

53 AgNO3

54 Na2S2O3

55 CaSO4

56 Fehling Solution A

57 Fehling Solution B

14

58 Litmus Soln blue

59 Litmus Soln red

60 NaCl

61 Boric Acid

62 Aniline

63 Benzaldehyde

64 Formic Acid

65 Glacial Acetic Acid

66 N Phenyl Anthranilic Acid

67 N N Dimethyl Aniline

68 Nitric Acid

69 Phenol

70 Schiff"s Reagent

71 Amm. Nickel Sulphate

72 CaCo3

73 CaSO4

74 CaCl2

75 Mercuric Oxide

76 Mercuric Chloride

77 Nickel Sulphate

78 2-Naphthol

79 K2Cr2O7

80 KMnO4

81 Sodium Thiosulphate

82 Stannous Chloride

83 Sodium metal

84 Sodium Bicarbonate

85 Salicylic Acid

15

Physics Lab

S.N. Name of Items

1 Verniers callipers

2 Graves appratus

3 Screw gauge

4 Wire

5 Spherometer

6 Convex mirror

7 Spherical bob

8 Clamp stand

9 thread

10 stop watch

11 Capillary tube

12 cantilever

13 slotted wt.

14 Clamp

15 barometer

16 Convex lens (0.5cm)

17 Convex lens(0.15cm)

18 Optical needle

19 Uprights

20 Optical bench

21 Convex lens(30cm)

22 Power supply

23 Voltameter

24 Ammeter

25 Rheostat

26 Resistance box (0-5000

27 One way key

28 Galvanometer

29 Milimeter

16

30 High resistance box(0-5000

31 Thrermameter

32 Simple pendulum

33 Metallic cylinder

34 Microscope

35 Glass strip

36 PN -junction Diode

37 Beaker

38 Two way key

39 Resistance coil

Electrical Machine and B.E.E Lab

S No. Description

1 DC Power Supply (0-30V)

2 Rheostate 50 ohm Rheostate 100 ohm Rheostate 200 ohm Rheostate 300 ohm

3 Galvanometer

4 Wattmeter 150 watt Wattmeter 300 watt Wattmeter 375 watt Wattmeter 700 watt Wattmeter 3 ph, 12KW

5 Auto T/F 1 ph Auto T/F 3 ph

6 Multimeter Digital Multimeter Ananlog

7 Tong Tester

8 Power factor 1 ph Power factor 3 ph

9 Single phase load arrangement

10 Inductor Choke

11 Experimental pannel

12 Capacitors

13 Inductor Box

14 Ammeter 0-1 A Ammeter 0-1.5 A Ammeter 0-2 A Ammeter 0-3 A

Ammeter 0-5A Ammeter 0-10 A

17

Ammeter 0-15 A Ammeter 0-20 A Ammeter 50 mA Ammeter 100 mA Ammeter 250 mA Ammeter 500 mA

15 Voltmeter 0-30 V Voltmeter 0-50v Voltmeter 0-60V Voltmeter 0-300V Voltmeter 0-500V Voltmeter 0-600V Voltmeter 0-650 V

16 Screw Driver Set

17 T/F 1 ph T/F 3 ph

18 Megger

19 Energymeter 1 ph Energymeter 3 ph

20 Techometer Digital Techometer Analog

21 Power Diode unit

22 Phase Sequence Indiacator

23 Lamps 100 watt Lamps 200 watt

24 Frequency meter digital

25 LCR meter

26 3ph synch. Motor

27 3 ph slipring I.M with starter

28

3 ph squirrel cage I.M with D.O.L Starter

29

DC Shunt Motor Coupled with 3 Ph I.M and Star/Delta starter

30 DC Series Motor

31

DC Shunt Motor with 4 point Starter

32

3 ph Alternator Coupled with DC Shunt motor

33 I.M 1 ph

34

Pannel: Speed control of DC motor with motor

35 General Pannel

36 Control Pannel BEE Lab

37 Main Control Pannel

18

ELECTRICAL PROJECT LAB S. NO NAME of ITEM

1 Side Cutting Plier

2 Nose Plier

3 Screw Drivers

4 Wire Stripper & Cutter

5 Hammer

6 Soldering Iron (35 W)

7 Soldering Iron Stand

8 Soldering Paste

9 Desoldering Pump

10 Hand Hexa

11 Continuity Tester

12 Multimeter

12 Regulared DC Power Supply

13 Auto Transformer, 1-phase

14 Frequency Generator

15 C. R. O

19

Electrical WorkShop

S No. Description

1 Combination plier

2 Screw Driver

3 S/w 1 way,5A S/w 2 way,5A

4 Socket outlet, 5A Socket outlet, 15A

5 Fuse, 6A

6 Indiactor S/W type

7 Ceiling Rose

8 Door Bell

9 Lamp Holder, Pendent Lamp Holder, Angle

10 Electric Iron Simple Electric Iron Automatic

11 Wire Striper

12 Iron Connector

13 3 pin plug, 5A 3 pin plug, 15A

14 Bell push button

15 Spanners of Different Sizes

16 Scissor

17 Capacitor, 2.5mfd

18 Ball bearing

19 Tape Scale

20 Varnish 500ml

21 Tube light Fitting

22 DPIC

23 Earth Tester

24 Neon Tester

25 Automatic Toaster

26 Gang Box

27 wooden Board 5" x 7"

28 Junction Box

29 Round Block

30 Screw Wrinch

31 Hand Saw

32 Hammer

33 Sumbay

34 Chiessel

35 Soldering Iron

36 Soldering Road

37 Multimeter

38 Center Punch

39 Drill Bit

40 Tap

41 Tap handle

42 Allen Key

43 Oil Gun

20

S No. Description

44 Fuse Kit Kat - 16 Amp

45 Fuse Kit Kat - 32 Amp

46 Extension Board

47 Cooler Pump

48 Plate Cooler Pump

49 Pressure Plate

50 Lamday

51 Couplling

52 Rotary S/w

53 Series testing board

54 Pedastal Fan Set

55 Energy Meter

56 Blow Lamp

57 Super Enammeled Wire Roll

58 Leathered Paper

59 Panceline Sheet 13 X 9

60 Panceline Sheet 8 x 8

61 Panceline Sheet 5 x 7

62 MCB-25 A

63

ELCB

64

Volt Meter 0-300 V

65

Volt Meter 0-50 V

66

Ammeter 0-5 A

67

Ammeter 0-2.5 A

68

Winding Machine

69

Energy Meter Single Phase

70

DOL Starter

71

Star Delta Starter

72

Earth Tester

73

Contactor 3 Phase

74

Contactor Control Training Board

75

Electric Iron

76

Electric Iron Automatic

77

Electric Kettle

78

Refrigerator

79

Raw Material for transformer

windings ( Core, Wire, Bobbin etc.)

21

S No.

Description

80

3 Phase connection armoured

cable

81

Ceiling Fan

82

Table Fan

83

Soldering Iron

84

Washing Machine

85

Water Cooler

ELECTRICAL IECD LAB

S. NO

NAME of ITEM

1 Screw Driver

2 Plier

3 Wire Cutter

4 Hygrometer

5 Soldering Iron

6 Desoldering Pump

7 Hammer

8 Hand Drill Machine

9 Tacho Meter

10 Iron Tester

11 Soldering Iron Stand

12 Resistance Box

13 Multimeter

14 Decade Condenser Box

15 Earth Tester

16 Inductor Box

17 Meggar

18 Distortion Meter

19 Pipe Ranch

20 Microprocessor Trainer Kit

21 Voltmeter

22 Ammeter

23 Galvanometer

24 Rheostat

25 L-C Meter

26 Digital Frequency Counter

27 Light Activated Turn-off Switch Kit

28 Regulared DC Power Supply

29 Frequency Generator

30 C. R. O

31 Voltage Stablizer



22

S. NO

NAME of ITEM

34 BCD to Seven Segment Kit

35 S C R Kit

36 Power Diode

37 Variable Resistance Kit

38 Illumination Control Using SCR

39 VI Characteristics of TRIAC & DIAC

40 SCR, UJT Based Timer Circuit

MECHANICAL ENGINEERING DEPARTMENT

LIST OF FACILITIES

WORKSHOP

Sr. No Particulars

1 Scale

2 Hammer 800gm

3 Hammer 1Kg

4 Cold Chisel

5 Try Square

6 Double Cut Bastered File

7 Triangular File

8 Round File

9 Center Punch

10 Chipping Hammer

11 Apron

12 Goggles

13 Gloves

14 Spark Lighter

15 Cable

16 Hose (Act+Oxy)

17 Welding Table

18 Steel Tape

19 Welding Torch

20 Wood Handle

21 Cutting Torch

22 Welding Holder

23 Welding Set 200 Amp.

24 Welding Screen

25 Bench Vice

26 MIG Welding M/c

27 TIG Welding M/c

28 Spot Welding M/c

29 Gas Cylinder

30 Plier

31 Straight Peen Hammer

23

Fitting Shop

S. no Name of Items

1 Flat File Bastard 300 mm

2 Flat File Smooth 300 mm

3 Flat File Bastard 200mm

4 Round File 200 mm

5 Triangular File 150 mm

6 Triangular File 200 mm

7 Half Round File 250 mm

8 Square File 200mm

9 Ball Pin Hammer Lbs

10 Oil Cane

11 Steel Rule 300mm

12 Try Square 150 mm

13 Center Punch 100 mm

14 Hand Hacksaw Frame

15 Surface Plate

16 Vernier Height Gauge

17 Vernier Caliper 150 mm

18 Spring Divider

19 V Block Set

20 Outside Caliper 150 mm

21 Inside Caliper 150 mm

22 Micro meter 0-25mm

23 C-Clamp

24 Combination Set

25 Drilling M/c 12mm

26 Marking Block

27 Bench Vice 3 No

28 Pipe Vice 3 No

29 Number Punch 3 mm

30 Chisels

31 Drill Set 1-12mm

32 Tap And Die Set Metric

33 Working Bench 6'x4'

34 Screw Driver Set

35 Spanner Set 12/12, 12/19

36 Ratchet Brace

37 Hand Drilling M/c 13 mm

38 Scriber

39 Hand Drilling M/c 6 mm

40 Knife Edge File

41 Allen Key Set

42 Adjustable Wrench

43 Pipe Wrench

44 Tap Wrench

45 Die Handle

46 Circular Die

47 Drill Bit in mm

48 Grip Plier

49 Drill M/c Vice

24

50 Polishers 1/2 hp

51 Needle File Set

52 Feeler Gauge

53 Radius Gauge

54 Thread Pitch Gauge

55 Hand Vice

56 Sine Bar 100mm

57 Dial Gauge

58 Plug Gauge

59 Dial Vernier

60 Ratchet Die

61 Plier

Sheet Metal Shop/Paint Shop

Sr. No Particulars

1 Sheet Gauge

2 Scale

3 Try Square

4 Tin Cutter

5 L Square

6 Plastic Hammer

7 Oil Cane

8 Bench Vice

9 Air Compressor with Spray Gun

10 Painting Brush Diff. Size

11 Scrapper

Turning and Machine Shop

Sr. Particulars

1 Shaper Machine

2 Surface Grinder

3 UGM Grinder

4 Horizontal Milling Machine

5 Vertical Milling Machine

6 Planer Machine

7 Power Hacksaw

8 Pedestal Grinder

9 Lathe Machine 6'

10 Redial Drill Machine

11 Machine Vice

12 Magnetic Chuck

13 V Block

14 Universal Dividing Head

15 Out Side Caliper

16 Inside Caliper

17 Odd Leg Caliper

18 Divider

19 Screw Driver

25

20 Vernier Caliper (Ordinary)

21 Vernier Caliper (Mitoyo)

22 Combination Set

23 Revolving Center MT-3, MT-2

24 Parting Tool Holder

25 Knurling Tool

26 Tool Holder

27 Surface Gauge

28 Boring Bar

29 Tool Bit 1/2"X4"

30 Tool Bit 3/8X3"

31 Tool Bit 5/16X3"

32 Try Square 6"

33 Hand Hacksaw Frame

34 Center Punch

35 Plier

36 Steel Rule

37 Smooth File 12"

38 2nd Cut File 8"

39 Bench Vice

40 Ring Spanner

41 Almirah

42 Pipe Wrench

43 Power Hacksaw Blade

44 Grinding Wheel

45 Hand Hacksaw Blade

46 Counter Shank Drill

47 Spanner Set (mm size)

48 Socket Sleeve MT-2-3

49 Socket Slave MT-3-4

50 Socket Sleeve MT-4-5

51 End Mill Cutter

52 T Slot Cutter

53 Tool Bit 1"X8"

54 Drill Chuck 13mm

55 Grinding Dresser

56 Side & Face Cutter

57 Plane Milling Cutter

58 Drill Set

59 Steel Tape (3mtr.)

26

Carpentry and Pattern shop

Sr. Particulars

1 Steel Scale

2 Marking Gauge (Aluminum)

3 Marking Gauge (Wood)

4 Try Square

5 Steel Tape

6 Mortise Chisels (Diff. Size)

7 Metal Jack Planer

8 Wooden Planer

9 Claw Hammer

10 Ball Peen Hammer

11 Screw Driver

12 Pincer

13 Rasp File

14 Oil Stone

15 Hand Drill Machine

16 Auger

17 Firmer Chisel

18 Circular Saw

19 Wood Working Lathe Machine

20 Bench Vice (Carpentry)

21 Electric Planer

22 File ( 12" Flat Bastard )

23 Plastic Chisel Handel

24 Bevel Scale

25 Hand Saw

CNC & CIM Lab

Sr. No Particulars

1 Stabilizer

2 CNC Turn

3 Allen Key

4 Double ended Spanner

5 Screw Driver 600.

6 Oil Can

7 63 mm Brush

8 Fuses

9 Billets (Raw Material)

10 Dead Center

11 Essential Key( Control Box, Lathe Chuck, M/c Cover)

12 Computers

13 UPS

14 X Milling Machine

15 Screw Driver

16 End mill cutter (16,12,10,8,6,5,4,3mm)

17 Center Drill (5.5,8,10,12mm)

Forging Shop

28

18 Flat Drill

19 Slot Drill

20 Strip Bar

21 Panel Box Key

22 Bit 13 Ring Type

23 Oil Gun

24 Collet Holder

25 Collar (Diff. Size)

26 Key Handle for tool bars

27 Open ended tool bar key

28 Hardware Lock Key

29 M Tab Software

30 Key Board

31 Oil Pump machine

32 Catalogues

33 File ( 12" Flat Bastard )

Sr. No. Particulars

1 Steel Rule

2 Hacksaw Frame

3 Hammer (Small)

4 Hammer (Big) Double Face

5 Hammer (Sladge)

6 Hammer (Cross Peen )

7 Try Square 6"

8 Centre Punch

9 Fuller

10 Flatter

11 Tongs 12"

12 Tongs 18"

13 Chisel

14 Blower

15 Forging Furnace

16 Anvil

17 Swage Block

LAB: Automobile

S. No. NAME OF THE APPARATUS

01 Plier

02 Nose Plier

03 Petrol Engine 2 Strike

04 Power Steering Assembly

05 Screw Adj. Plier

06 Spanner Set

07 Double Opened End Spanner

08 Socket Set + Wrench Set

09 Screw Driver Set

10 T-Socket 12 No., T-Socket 8 No.

11 Diesel Engine 4 Stroke

12 Rack & Pinion Steering System

13 Fuel Injector Pump (Multi Cylinder)

14 Battery Charger

15 Hydraulic Jack

16 Crank shaft

17 Fuel Injector Pump (Single Cylinder)

18 Bearing Puller

19 Petrol Engine 4 Stroke

20 Cam Shaft

21 Carburetor System

22 Pressure Plate

23 Clutch Plate

24 Cylinder Block 2 Stroke

25 Connecting Rod

26 Cylinder Block 4 stroke

27 Steering Extension Shaft

28 Multimeter

29 Battery (Panasonic 12 V)

30 Piston

31 Cam Shaft (1 C 4 S)

32 Hydrometer

29

LAB: Hydraulic Machines

S. No. NAME OF THE

APPARATUS

01 Apparatus to determine

coefficient of friction of pipes

02 Lever Safety Valve

03 Venturimeter & Orificemeter

set-up

04 Bernoulli’s Apparatus

05 Centrifugal Pump Model

06 Pelton Wheel Turbine Model

07 Francis Turbine Model

08 Pressure Gauge

09 Spring loaded safety Valve

10 Hydraulic Press Model

11 Hydraulic Jack

12 Sprit level

13 U-Tube Manometer

LAB: Installation Testing & Maintenance

S. No. NAME OF THE APPARATUS QUANTITY

01 Chain Pulley (1 ton) 02

02 Pipe Wrench (Socket type 14”) 02

03 Torque Wrench 250-600 mm 012Set

04 Torque Wrench 150-400 mm 02 Set

LAB: Inspection & Quality Control


01 Vernier Caliper 02

02 Vernier Caliper (Digital) 02

03 Vernier Height Gauge 01

04 Depth Micrometer 02

05 Digital Micrometer 02

06 Ball End Micrometer 02

07 Flat End Micrometer 02

08 Gear Roller Tester 01

09 Dial Gauge 04

10 Puppy Dial 02

11 Angle Plate 02

12 Calipers (Inside) 05

13 Calipers (Outside) 05

14 Try Square 8” 06

30

15 Gear Tooth Vernier 01

16 Bevel Protractor 02

17 Combination Set 02

18 Sine Bar 02

19 Plug Gauge 02

20 Ring Gauge 02

21 Snap Gauge 02

22 Radius Gauge 02

23 Feeler Gauge 04

24 Thread Gauge 02

LAB: Materials & Metallurgy


01 Digital Muffle Furnace 02

02 Metallurgical Microscope 02

LAB: Applied Mechanics

S.No. NAME OF THE APPARATUS QUANTITY

01 Glass plane 02

02 Jib crane 02

03 Inclined plane for coeff. Of friction 02

04 Screw Jack 02

05 Simply supported beam apparatus 02

06 Straight plane for coeff. Of friction 02

07 Gravesandsapparatus 02

08 Winch Crab 02

09 Worm and Worm Wheel 02

10 Weight 1kg 23

11 Weight 500gm 08

12 Weight 100gm 04

13 Weight 50gm 24

14 Weight pan 03

15 Weight 20gm 20

16 Weight 200gm 10

31

LAB: Refrigeration & Air Conditioning


01 Rotary Compressor 02

02 Refrigerator 165lt 01

03 Flaring Tool 01

04 Curving Plier 01

05 Cutting Tool for Copper Tube 01

06 Pinch of Tool 01

07 Swaging & Brazing Tool 01

08 Refrigeration Apparatus 01

09 Thermostat Switch 01

10 LP/HP Cut out switch 01

11 Overload Protector 01

12 Filter 01

13 Drier 01

LAB: Thermodynamics


01 2-S Petrol Engine (model) 01

02 2-S Diesel Engine(model) 01

03 4-S Petrol Engine(model) 01

04 4-S Diesel Engine(model) 01

05 Solex Carburetor(model) 01

06 Shut off Valve 01

07 Surface Condenser 01

08 Separating & Throttling

Calorimeter 01

09 Bomb Calorimeter 01

10 Digital temperature Indicator 01

11 Voltage controller 01

12 Glass tubes 13

13 Orsat apparatus 01

14 Babcock & Wilcox

Boiler(model) 01

15 Lancashire Boiler(model) 01

16 Common Rail Injection System 01

17 Ignition System of

Automobile(Battery) 01

18 Parallel Flow Jet Condenser 01

19 Ejector Condenser 01

20 Evaporator Condenser 01

21 Morse Test kit 01

22 Rope Brake Dynamometer 01

23 Air/Steam Pressure turbine 01

24 Redwood viscometer 01

25 Tach/dual/volt analyzer 01

26 Xenon Timing Flash Gun(2004) 01

27 Mechanical Temperature Gauge 01

32

LAB: Strength of Materials

S. No. NAME OF THE APPARATUS

01 Enkay Torsion Testing Machine

02 Enkay Universal Testing Machine

03 Enkay Spring Testing Machine

04 Impact Testing Machine

05 Rockwell Hardness Tester Apparatus

06 Job Holder

07 Pointer Diamond

08 Master Piece for Hardness

CIVIL ENGINEERING DEPARTMENT

LAB- WATER SUPPLY & WASTE WATER ENGG.

S. No. Description

1 Turbidimeter (3.5 Digit Display

range upto 1000 NTU with manual)

2 PH meter (Indication 3.5 to 4 LED

display, Operation Manual)

3 Conductivity meter (Indication 3.5 to

4 LED display, Operation Manual)

4 Inspection chamber (model)

5 Septik tank (model)

6 Biogas plant (model)

LAB- SURVEYING –I, II

S. No. Description

1 Transit theodolite (vernier type with 20sec

accuracy)

2 Optical square (made of brass)

3 Measuring Chain-30m

4 Measuring Chain-20m

5 Plain Table With Accessories(750x600mm)

6 Abney Level(125mm Size)

7 Ghat Tracer(Made Of Steel Pipe)

8 Prismatic Compass(Brass) 100mm Size &

Aluminium Stand

9 Survey Compass(100mm)

10 Cross Staff Head(100mm Size) Brass

11 Survey Umbrella(2m Dia)

12 Tangent Clinometer

13 Levelling Staves(Telescopic) Export Quality 4m In

Four Sections

33

14 Auto Level Ds-2010

15 Dumpy Level(230mm)

16 Ranging Rod(3m)

17 Measuring Tapes (20m Size) Metallic

18 Wooden Pegs

19 Planimeter Completer With All Accessories

LAB- CONCRETE TECHNOLOGY

S. No. Description

1 Electrically heated oven (thermostatically

controlled,30x30x30cm of 28ltrs capacity, stainless

steel, upto temp.250˚C)

2 Blaine air permeability apparatus(for fineness of

cement)

3 Slump cone & its accessories (for determining

workability of cement)

4 Compaction factor apparatus (for determining

workability )

5 Concrete cube moulds (15cm) CI

6 Set of sieves (Brass Frame, 20cm dia.)

(4.75,4.00,3.25,2.8,2.36,2.00,1.4,1.00mm,850,600mi

cron)

7 Flakiness index apparatus

8 Elongation index apparatus

9 Bulk density apparatus

Density Basket (3,15,30 lt)

10 Needle vibrator(vibrating pin=350mm

long&25mm dia.) , 1HP motor

LAB- SOIL & FOUNDATION ENGINEERING S. No. Description

1 Soil exploration equipment (augers head 38mm dia.)

2 Rapid moisture meter (50%)

3 Sand replacement method apparatus(small- 115mm dia. Sand pouring, container and metal tray 30cm

sq. and 5cm deep with 10cm hole in center)

4 Core cutter apparatus(as per IS 2720 part XX1X- 1966)

5 Liquid limit device and Plastic limit device

6 Pycnometer with burette(1000ml

7 Compaction apparatus using light compaction(compaction mould mild steel,150mm

int.dia.x127.3mm ht. X 2250cc with collar & rammer of 4.89kgX450mm control fall)

34

LAB- CONSTRUCTION MATERIAL

S. No. Description

1 Vicat needle apparatus

2 Le chatlier mould

3 Compression testing machine(1000KN

capacity)

4 Cube models 7.07cms cube loose base plate

5 Weighing balance 10kg

6 90 micron sieve brass with lid and pan

ELECTRONICS & COMMUNICATION ENGINEERING

DEPARTMENT

Analog Eltx. Lab:

S.No. Name of item

1 Function Generator/Signal Generator

2 Auto Transformer

3 Bread Board

4 Ammeter

5 Voltmeter

6 Emitter follower kit

7 DC Power supply

8 Multimeter

9 Desoldering Pump

10 Soldering Iron

11 Screw Driver Set

12 Solder wire role

13 Flux Box

14 Op-Amp Parameter Kit

15 Op-Amp Application Kit

16 Op-Amp Trainer kit

17 CRO & CRO Probe

18 Wire stripper

19 Twizzer

20 Crystal Oscillator Kit

35

21 Wein Bridge Oscillator Kit

22 Hartley Oscillator Kit

23 Phase Shift Oscillator Kit

24 Tuned Amplifier Kit

25 CE Amplifier Kit

26 Integrating,Differentiating & Clamping Kit

27 P-N Junction Diode Characteristics kit

28 Zener Diode Characteristics kit

29 Push -Pull Amplifier Kit

30 Two Stage Transistor Amplifier Kit

31 Two Stage RC Coupled Amplifier Kit

32 JFET Characteristics kit

33 Single Ended Amplifier kit

34 Transistor Characteristics kit

35 Multivibrator Bi-stable Kit

36 Multivibrator Astable Kit

37 Nose Plier

38 Flexible wire Roll

39 Single stage RC Coupled Amplifier Kit

40 Transformer (9-0-9)

41 Hex Saw

Communication Lab S.No. Name of item

1. Microwave

Bench

Klystron Power Supply

a Klystron Mount

b Klystron Tube

C Variable Atten.

d Slotted Section with Probe Carriage

e Tunable Probe

f Solid State VSWR Meter

g Frequency Meter

h Pyramidal Horn

i Isolator/Circulator

j Magic Tee

k Multi hole Directional Coupler

l Matched terination

m W/G Detector Mount

n Co-axial Adoptor

36

o W/G Stand

p Detector Diode

q Microwave Main Cord For KP-1010 Supply

r Klystron Power Supply variable

2 Fibre optic Trainer Kit

3 T.V. Kit(B& W)

4 T.V. Kit(Colour)

5 T.V. (Texla)

6 T.V. Picture Tube (B& W)

7 T.V. Picture Tube (Colour)

8 Old T.V. (20' B.W.)

9 T.V. Cabinet

10 T.V. Cabinet For Colour T.V.

11 T.V. feeder Wire

12 Colour T.V.( New)

13 Sound Column(Speaker)

14 Stereo Casstte Amplifier

15 Mike Ahtja

16 Horn Speaker

17 Stand

18 Pattern generator (BW)

19 Pattern generator (Colour)

20 Radio(KCHIBO 10 Band)

21 Audio Cassette

22 Telephone Set(Push Button)

23 AF Oscillator(Tropicion)

24 AM Modulator/ Demodulator KIT

25 FM Generator(1012)

26 CRO

27 AM/FM Generator

28 Radio Recevier Kit

29 PAM Kit

30 PPM Kit

31 PWM Kit

32 FM Generator Kit

33 O/P Power Meter

34 Pa System

35 Satillite Receiver

36 Regulated DC Power Supply

37 Stereo Amplifier Kit

38 Stero amplifier

39 DB Step Attenuator

40 AC MilliVoltmeter

41 Dc Micro Voltammeter

42 AF-RF Signal Generator

37

43 RF Signal Generator

44 Pulse Generator

45 Spot Freq. Audio Oscillator

46 LCR Meter

47 Step Down Transformer

48 CRO Probe

49 Soldering Iron

50 IC 741

51 Digital Multimeter

52 Analog Multimeter

53 LED

54 Potentiometer

55 PCM Kit

56 Dish Antenna Kit

57 DTMF Tele phone kit

Digital & Microprocessor Lab:

Sr. No. Name of item

1 microprocessor8085

2 microprocessor8086

3 Stepper motor controller card

4 ADC card

5 8051 microcontroller

6 Digital I/O interface card

7 Dual DAC

8 Elevator simulator card

9 Regulated Dc power supply

10 Keyboard interfcae card

11 Ic tester interfcace card

12 Multimeter(DIGITAL)

13 DC microvolt-ammeter

14 AC millivoltmeter

15 Electronic volt ohm meter

16 Soldering iron

17 Sine square wave oscillator

18 Condenser Box

19 Transistor curve Tracer

20 Logic conroller interfcae card

21 Opto coupler interface card

22 Printer

23 P-III Computer

38

M.O.E.E. Lab

Sr. No. Name of item

1 Digital LCR meter

2 Distortion meter

3 Desoldering pump

4 Frequency counter

5 LCR meter

6 PA systm

7 Multimeter

8 Screw Driver ser

9 Soldering Iron

10 Tape Recorder

11 TV

12 Video Game

13 VCD player

14 Wire Stripper

15 Wire cutter

16 Inverter

17 Stereo Amplifier

18 Ammeter

19 ADC

20 Bread board

21 CRO

22 CRO Probe

23 Camel cutter

24 Drilling Machine

25 DAC

26 Dual power supply

27 DC speed Control System

28 Function Generator

29 Hygrometer

30 IC regulated Power supply

31 Iron stand

32 Linear displacement trainer

kit

33 LVDT &induction kit

34 Linear system simulation kit

35 LDR Kit

36 Microcontroller kit

37 plier

38 Pulse generator

39 PID controller

40 Programmer kit

41 PH meter

39

42 Rotational speed trainer kit

43 Relay control system

44 Signal generator

45 Strain gauge kit

46 Steel cutter

47 Sound level meter

48 Syncho Tx/Rx kit

49 Stepper motor kit

50 Sphygrmanometer

51 Thermal trainer kit

52 Torque/pressure kit

53 Temp/Thermocouple kit

54 Usb card

55 U tube

56 Screw Driver

57 Volt meter

58 Vernier caliper

Electronic Workshop Lab

S.No. Name of item

1 Bench vice

2 Continuty tester

3 Drill machine electric

4 Hand drill machine

5 De soldering wire

6 De soldering wick

7 De soldering pump

8 Fecl3

9 Hammer

10 Claw Hammer

11 Hacksaw

12 Multimeter(Analog)

13 Plier

14 Round Spanner

15 Camel cutter

16 Spanner Set

17 Soldering Iron

18 Soldering Iron stand

19 Solder wire

20 Screw driver

21 Tinning Pot.

22 Twizzer

23 Transformer

24 Cooper Clad Sheet

25 Wire Stripper

40

26 Steel Cutter

27 Digital Multimeter

28 Stabilizer

29 Nose Plier

GAMES AND SPORTS FACILITY:

Indoor Games: Table Tennis, Badminton

Outdoor Games : Volley Ball, Basket Ball, Cricket, Football etc.

EXTRA CURRICULAR ACTIVITIES:

Annual Function, Quiz, Debates etc.

DETAILS OF ACADEMIC FACILITIES

Description No. Size in Sqm

Class Room 15 1088

Tutorial Room 04 132

Drawing Hall 01 132

Laboratories 26 2056

Computer Centre 01 150 (Total Area)

Workshop 01 204

Library 01 350

Seminar Hall 01 132

Additional Workshop 01 198

Reading Room in Library 01 65

Occupancy Certificate (Annexure-2)

Fire Certificate

CURRICULUM FOR EACH OF THE PROGRAMMES AS APPROVED BY THE BOARD/UNIVERSITY STUDY

AND EVALUATION SCHEME FOR DIPLOMA PROGRAMME

Visit the link for Syllabus and Study Scheme: http://hsbte.org.in/syllabus

http://hsbte.org.in/syllabus

XVI. Enrollment of students in the last 3 years

Name of running Institutes /Training

Centres

Types of Course / Training

Year of establishment of

Institute

Sanctioned intake

Total number of

students enrolled in

the

institute

(Certificate /Diploma

/ UG/PG etc.)

Hindu Institute of

Technology, Sonepat

Diploma

1994

786

180

XVII. LoA and subsequent EoA till the current Academic Year.

Latitude and Longitude: Latitude - 28, 58, 50 Longitude - 77, 1, 8

F.No. North-West/1-731858632/2012/EOA Date: 10 May

2012

To,

The Financial Commissioner &

Principal Secretary (Technical)

Govt. of Haryana,

Room No. 503/5,

Sector -17 New

Secretariat,

Chandigarh-160017

Sub: Extension of approval for the academic year 2012-13

Ref: Application of the Institution for Extension of approval for

the academic year 2012-13 Sir/Madam,

In terms of the provisions under the All India Council for Technical Education (Grant of

Approvals for Technical Institutions) Regulations 2010 notified by the Council vide

notification number F-No.37-3/Legal/2010 dated 10/12/2010 and amendment vide

notification number F-No.37-3/Legal/2011 dated 30/09/2011 and norms standards,

procedures and conditions prescribed by the Council from time to time, I am directed to

convey the approval to

Regional Office North-West Application Id 1-731858632

Permanent Id 1-463560831

Name of the Institute HINDU INSTITUTE OF

TECHNOLOGY Institute Address INDUSTRIAL AREA, SONEPAT, SONEPAT,

Haryana, 131001

Name of the

Society/Trust

THE SONEPAT HINDU

EDUCATIONAL &

CHARITABLE

SOCIETY,SONEPAT

Society/Trust Address HINDU COLLEGE,ROHTAK

ROAD,SONEPAT,SONEPAT,SONEPAT,Haryana,131 001

Institute Type Unaided - Private

Opted for change from

Women to Co-ed

No Opted for change of

name


site

No

Change from Women to

Co-ed approved

Not Applicable Change of name

Approved

Not Applicable Change of site

Approved

Not Applicable

to conduct following courses with the intake indicated below for the academic year 2012-13

Application Number: 1-731858632* Page 1 of 4

Note: This is a Computer generated Extension of Approval Letter. No signature is required. Letter Printed On:18 May 2012.

Printed By : AIC003246

Application Id: 1-

731858632

Cour

se

Full

/Par

t T

ime

Affiliatin

g Body

Inta

ke

2011

-12

Inta

ke

Appro

ved

for

12-1

3

NR

I

PIO

Fore

ign C

oll

abora

tion

Program Shi ft Lev

el

ENGINE

ERING

AND

TECHNO

LOGY

1st

Shi ft

DIP

LO

MA

COM

PUT

ER

ENG

INEE

RIN

G

FULL TIME DIRECTOR

ATE OF

TECHNICA

L

EDUCATIO

N,

CHANDIGA

RH

90 90 No No No

ENGINE

ERING

AND

TECHNO

LOGY

1st

Shi ft

DIP

LO

MA

ELE

CTRI

CAL

ENG

INEE

RIN

G

FULL TIME DIRECTOR

ATE OF

TECHNICA

L

EDUCATIO

N,

CHANDIGA

RH

60 60 No No No

ENGINE

ERING

AND

TECHNO

LOGY

1st

Shi ft

DIP

LO

MA

ELE

CTR

ONI

CS &

COM

MUN

ICAT

ION

ENG

G

FULL TIME DIRECTOR

ATE OF

TECHNICA

L

EDUCATIO

N,

CHANDIGA

RH

120 120 No No No

ENGINE

ERING

AND

TECHNO

LOGY

1st

Shi ft

DIP

LO

MA

INST

RUM

ENT

ATI

O

N &

CON

TRO

L

ENG

INEE

RIN

G

FULL TIME DIRECTOR

ATE OF

TECHNICA

L

EDUCATIO

N,

CHANDIGA

RH

30 0 No No No

ENGINE

ERING

AND

TECHNO

LOGY

1st

Shi ft

DIP

LO

MA

MEC

HANI

CAL

ENG

INEE

RIN

G

FULL TIME DIRECTOR

ATE OF

TECHNICA

L

EDUCATIO

N,

CHANDIGA

RH

120 120 No No No

ENGINE

ERING

AND

TECHNO

LOGY

1st

Shi ft

DIP

LO

MA

CIVI

L

ENG

INEE

RIN

G

FULL TIME DIRECTOR

ATE OF

TECHNICA

L

EDUCATIO

N,

CHANDIGA

RH

60 60 No No No




Application Id: 1-

731858632

Cour

se

Full

/Par

t T

ime

Affiliatin

g Body

Inta

ke

2011

-12

Inta

ke

Appro

ved

for

12-1

3

NR

I

PIO

Fore

ign C

oll

abora

tion

Program Shi ft Lev

el

ENGINE

ERING

AND

TECHNO

LOGY

1st

Shi ft

DIP

LO

MA

AUT

OMO

BILE

ENG

INEE

RIN

G

FULL TIME DIRECTOR

ATE OF

TECHNICA

L

EXAMINAT

ION

HARYANA

0 0 No No No

The above mentioned approval is subject to the condition that HINDU INSTITUTE OF TECHNOLOGY shall follow

and adhere to the Regulations, guidelines and directions issued by AICTE from time to time and

the undertaking / affidavit given by the institution along with the application submitted by the

institution on portal.

In case of any differences in content in this Computer generated Extension of Approval Letter,

the content/information as approved by the Executive Council / General Council as available on

the record of AICTE shall be final and binding.

Strict compliance of Anti-Ragging Regulation:- Approval is subject to strict compliance of

provisions made in AICTE Regulation notified vide F. No. 37-3/Legal/AICTE/2009 dated July

1, 2009 for Prevention and Prohibition of Ragging in Technical Institutions. In case Institution

fails to take adequate steps to Prevent Ragging or fails to act in accordance with AICTE

Regulation or fails to punish perpetrators or incidents of Ragging, it will be liable to take any

action as defined under clause 9(4) of the said Regulation.

Copy to:

1. The Regional Officer, All India Council for

Technical Education Plot No.

1310, Sector 42-B

Chandigarh-160 036

2. The Director Of Technical Education,

(Dr. K P Isaac)

Member Secretary, AICTE

Haryana

3. The Registrar, DIRECTORATE OF TECHNICAL EDUCATION, CHANDIGARH

4. The Principal / Director, HINDU INSTITUTE OF

TECHNOLOGY

INDUSTRIAL AREA,

SONEPAT,SONEPAT,

Haryana,131001




5. The Secretary / Chairman, THE SONEPAT HINDU EDUCATIONAL &

CHARITABLE SOCIETY,SONEPAT HINDU

COLLEGE,ROHTAK ROAD,SONEPAT,

SONEPAT,SONEPAT,

Haryana,131001

6. Guard File(AICTE)


F.No. North-West/1-1362104003/2013/EOA Date: 19-Mar-

2013

To,



Govt. of Haryana,

Room No. 503/5,

Sector -17 New

Secretariat,

Chandigarh-160017






notification number F-No.37-3/Legal/2012 dated 27/09/2012 and norms standards, procedures

and conditions prescribed by the Council from time to time, I am directed to convey the

approval to





Haryana, 131001

Name of the

Society/Trust

THE SONEPAT HINDU

EDUCATIONAL &

CHARITABLE SOCIETY,SONEPAT




Opted for change from Women to Co-ed

No Opted for change of name

No Opted for change of site

No


Co-ed approved


Approved


Approved

Not Applicable



Note: This is a Computer generated Extension of Approval Letter. No signature is required. Letter Printed On:28 March 2013.


Application Id: 1-1362104003 Course

Full

/Par

t T

ime

Affiliating Body

Inta

ke

2012

-13

Inta

ke

Appro

ved

for

13-1

4

NR

I

PIO

Fore

ign C

oll

abora

tion

Program Shift Level

ENGINEERING

AND

TECHNOLOGY

1st Shift DIPLOMA CIVIL

ENGINEERING

FULL

TIME

Directorate of

Technical Education,

60 120 No No No

ENGINEERING

AND

TECHNOLOGY

1st Shift DIPLOMA COMPUTER

ENGINEERING

FULL

TIME

Directorate of


90 60 No No No

ENGINEERING

AND

TECHNOLOGY

1st Shift DIPLOMA ELECTRICAL

ENGINEERING

FULL

TIME

Directorate of


60 60 No No No

ENGINEERING

AND

TECHNOLOGY

1st Shift DIPLOMA ELECTRONICS

&

COMMUNICATI

ON ENGG

FULL

TIME

Directorate of


120 60 No No No

ENGINEERING

AND

TECHNOLOGY

1st Shift DIPLOMA MECHANICAL

ENGINEERING

FULL

TIME

Directorate of


120 120 No No No

Validity of the course details may be verified at www.aicte-india.org>departments>approvals









http://www.aicte-india.org/







(Dr. Kuncheria P. Isaac)


Copy to:

1. The Regional Officer, All India Council for

Technical Education Plot No.

1310, Sector 42-B

Chandigarh-160 036

2. The Director Of Technical Education, Haryana

3. The Registrar, Directorate of Technical Education,


TECHNOLOGY

INDUSTRIAL AREA,

SONEPAT,SONEPAT,

Haryana,131001




SONEPAT,SONEPAT,

Haryana,131001


F.No. North-West/1-2016738150/2014/EOA Date: 11-Mar-

2014

To,



Govt. of Haryana,

Room No. 503/5,

Sector -17 New

Secretariat,

Chandigarh-160017








approval to





Haryana, 131001

Name of the

Society/Trust

THE SONEPAT HINDU

EDUCATIONAL &





Opted for change from Women to Co-ed

No Opted for change of name

No Opted for change of site

No


Co-ed approved


Approved


Approved

Not Applicable



Note: This is a Computer generated Letter of Approval.No signature is required. Letter Printed On:26 May 2014

Printed By : aic003246


Full

/Par

t T

ime

Affiliating Body

Inta

ke

2013

-14

Inta

ke

Appro

ved

for

14-1

5

NR

I A

ppro

val

sta

tus

PIO

Appro

val

sta

tus

Fore

ign C

oll

abora

tion

Appro

val

sta

tus

Program Shift Level

ENGINEERING

AND

TECHNOLOGY

1st

Shift

DIPLOMA CIVIL

ENGINEERING

FULL

TIME

Directorate of

Technical

Education,

120 120 No No

N

ENGINEERING

AND

TECHNOLOGY

1st

Shift

DIPLOMA COMPUTER

ENGINEERING

FULL

TIME

Directorate of

Technical

Education,

60 60 No No

N

ENGINEERING

AND

TECHNOLOGY

1st

Shift

DIPLOMA ELECTRICAL

ENGINEERING

FULL

TIME

Directorate of

Technical

Education,

60 60 No No

N

ENGINEERING

AND

TECHNOLOGY

1st

Shift

DIPLOMA ELECTRONICS &

COMMUNICATION

ENGG

FULL

TIME

Directorate of

Technical

Education,

60 60 No No

N

ENGINEERING

AND

TECHNOLOGY

1st

Shift

DIPLOMA MECHANICAL

ENGINEERING

FULL

TIME

Directorate of

Technical

Education,

120 120 No No

N

Validity of the course details may be verified at www.aicte-india.org>departments>approvals
















(Dr. Kuncheria P. Isaac)


Copy to:

1. The Regional Officer, All India Council for Technical

Education Plot No. 1A, 5th

Floor, DTE(Pb..) Building,

Dakshin Mark, Sector 36-A, Chandigarh-160 036


3. The Principal / Director,

HINDU INSTITUTE OF

TECHNOLOGY

INDUSTRIAL AREA,

SONEPAT,SONEPAT,

Haryana,131001




SONEPAT,SONEPAT,

Haryana,131001


F.No. North-West/1-2454355179/2015/EOA Date: 07-Apr-2015

To,



Govt. of Haryana,

Room No. 503/5,

Sector -17 New

Secretariat,

Chandigarh-160017








approval to





Haryana, 131001

Name of the

Society/Trust

THE SONEPAT HINDU

EDUCATIONAL &






Women to Co-ed


name


site

No


Co-ed approved


Approved


Approved

Not Applicable

To conduct following courses with the intake indicated below for the academic year 2015-16


Note: This is a Computer generated Letter of Approval.No signature is required. Letter Printed On:11 April 2015



Full

/Par

t T

ime

Affiliating Body

Inta

ke

2014

-15

Inta

ke

Appro

ved

for

15-1

6

NR

I A

ppro

val

sta

tus

PIO

Appro

val

sta

tus

Fore

ign C

oll

abora

tion

Appro

val

sta

tus

Program Shift Level

ENGINEERING

AND

TECHNOLOGY

1st

Shift

DIPLOMA CIVIL

ENGINEERING

FULL

TIME

Directorate of

Technical

Education,

120 120 NA NA

NA

ENGINEERING

AND

TECHNOLOGY

1st

Shift

DIPLOMA COMPUTER

ENGINEERING

FULL

TIME

Directorate of

Technical

Education,

60 60 NA NA

NA

ENGINEERING

AND

TECHNOLOGY

1st

Shift

DIPLOMA ELECTRICAL

ENGINEERING

FULL

TIME

Directorate of

Technical

Education,

60 60 NA NA

NA

ENGINEERING

AND

TECHNOLOGY

1st

Shift

DIPLOMA ELECTRONICS &

COMMUNICATION

ENGG

FULL

TIME

Directorate of

Technical

Education,

60 60 NA NA

NA

ENGINEERING

AND

TECHNOLOGY

1st

Shift

DIPLOMA MECHANICAL

ENGINEERING

FULL

TIME

Directorate of

Technical

Education,

120 120 NA NA

NA

Note: Validity of the course details may be verified at www.aicte- india.org>departments>approvals













http://www.aicte-india.org/http://www.aicte-india.org/

Dr. Avinash S

Pant Actg

Chairman,

AICTE

Copy to:








TECHNOLOGY

INDUSTRIAL AREA,

SONEPAT,SONEPAT,

Haryana,131001




SONEPAT,SONEPAT,

Haryana,131001


F.No. North-West/1-2816419699/2016/EOA Date: 05-Apr-2016

To,



Govt. of Haryana,

Room No. 503/5,

Sector -17 New

Secretariat,

Chandigarh-160017





Approvals for Technical Institutions) Regulations 2012 notified by the Council vide notification

number F-No.37-3/Legal/2012 dated 27/09/2012 and norms standards, procedures and

conditions prescribed by the Council from time to time, I am directed to convey the approval to



TECHNOLOGY Permanent Id 1-463560831

Name of the

Society/Trust

THE SONEPAT HINDU

EDUCATIONAL &


Institute Address INDUSTRIAL AREA, SONEPAT, SONEPAT,

Haryana, 131001

Institute Type Unaided - Private Society/Trust Address HINDU COLLEGE,ROHTAK



Women to Co-ed and Vice

versa


name


site

No


Co-ed approved and Vice

versa


Approved


Approved

Not Applicable

To conduct following courses with the intake indicated below for the academic year 2016-17 Application Id: 1-2816419699 Course

Fu

ll/P

art

Tim

e

Affiliating Body

Inta

ke

20

15

-16

Inta

ke

Ap

pro

ved

NR

I

Ap

pro

val

stat

us

PIO

/

FN

/

Gu

lf

Fore

ign

Coll

abor

ario

n/T

w

inin

g

Pro

gra

m

Appro

val

All India Council for Technical Education

(A Statutory body under Ministry of HRD, Govt. of India)

7th Floor, Chandralok Building, Janpath, New Delhi- 110 001

PHONE: 23724151/52/53/54/55/56/57 FAX: 011-23724183 www.aicte-India.org


Program Shift Level

ENGINEERIN G

AND

1st

Shift

DIPL

OMA

CIVIL

ENGINEERING

FULL

TIME

Directorate of

Technical

Education,

120 120 NA NA NA

Application Number: 1-2816419699 Page 1 of 3

Note: This is a Computer generated Report.No signature is required. Letter Printed On:22 April 2016


TECHNOLO

GY

ENGINEERIN G

AND

TECHNOLO GY

1st

Shift

DIPL

OMA

COMPUTER

ENGINEERING

FULL

TIME

Directorate of

Technical

Education,

60 60 NA NA NA

ENGINEERIN G

AND

TECHNOLO GY

1st

Shift

DIPL

OMA

ELECTRICAL

ENGINEERING

FULL

TIME

Directorate of

Technical

Education,

60 60 NA NA NA

ENGINEERIN G

AND

TECHNOLO GY

1st

Shift

DIPL

OMA

ELECTRONICS

&

COMMUNICATI

ON ENGG

FULL

TIME

Directorate of

Technical

Education,

60 60 NA NA NA

ENGINEERIN G

AND

TECHNOLO GY

1st

Shift

DIPL

OMA

MECHANICAL

ENGINEERING

FULL

TIME

Directorate of

Technical

Education,

120 120 NA NA NA














Note: Validity of the course details may be verified at www.aicte-india.org

Dr. Avinash S Pant Vice -

Chairman, AICTE

Copy to:










2. The Director Of Technical Education,




Haryana



TECHNOLOGY

INDUSTRIAL AREA,

SONEPAT,SONEPAT,

Haryana,131001




SONEPAT,SONEPAT,

Haryana,131001







F.No. North-West/1-3330503850/2017/EOA Date: 30-Mar-2017

To,



Govt. of Haryana,

Room No. 503/5,

Sector -17 New

Secretariat,

Chandigarh-160017






notification number F.No.AB/AICTE/REG/2016 dated 30/11/2016 and norms standards,

procedures and conditions prescribed by the Council from time to time, I am directed to

convey the approval to

Permanent Id 1-463560831 Application Id 1-3330503850



Haryana, 131001

Name of the

Society/Trust

THE SONEPAT HINDU

EDUCATIONAL &

CHARITABLE

SOCIETY,SONEPAT



Institute Type Unaided - Private Region North-West


Women to Co-ed and Vice

versa


name


site

No


Co-ed approved and Vice

versa


Approved


Approved

Not Applicable

All India Council for Technical Education (A Statutory body under Ministry of

HRD, Govt. of India)

Nelson Mandela MargVasant Kunj,

New Delhi-110067 PHONE: 23724151/52/53/54/55/56/57

FAX: 011-23724183 www.aicte-India.org


Opted for Conversion from

degree to diploma

No Opted for Conversion from

diploma to degree

No Conversion (degree to

diploma or vice-a-

versa) Approved

Not Applicable

To conduct following courses with the intake indicated below for the academic year 2017-18 Application Id: 1-3330503850 Course

Full

/Par

t T

ime

Affiliatin

g Body

Inta

ke

2016

-17

Inta

ke

Appro

ved

for

2017

-18

NR

I A

ppro

val

sta

tus

PIO

/ F

N /

Gulf

quo

ta/

OC

I/

Appro

val

sta

tus

Fore

ign

Co

llab

ora

rio

n/T

win

ing

Pro

gra

m A

ppro

val

stat

us*

Program Shift Level




ENGINEERIN G

AND

TECHNOLO GY

1st

Shift

DIPL

OMA

CIVIL

ENGINEERING

FULL

TIME

Directorate of

Technical

Education

120 120 NA NA NA

ENGINEERIN G

AND

TECHNOLO GY

1st

Shift

DIPL

OMA

COMPUTER

ENGINEERING

FULL

TIME

Directorate of

Technical

Education

60 60 NA NA NA

ENGINEERIN G

AND

TECHNOLO GY

1st

Shift

DIPL

OMA

ELECTRICAL

ENGINEERING

FULL

TIME

Directorate of

Technical

Education

60 60 NA NA NA

ENGINEERIN G

AND

TECHNOLO GY

1st

Shift

DIPL

OMA

ELECTRONICS

&

COMMUNICATI

ON ENGG

FULL

TIME

Directorate of

Technical

Education

60 60 NA NA NA

ENGINEERIN G

AND

TECHNOLO GY

1st

Shift

DIPL

OMA

MECHANICAL

ENGINEERING

FULL

TIME

Directorate of

Technical

Education

120 120 NA NA NA














Note: Validity of the course details may be verified at www.aicte-india.org




New Delhi-110067 PHONE: 23724151/52/53/54/55/56/57

FAX: 011-23724183 www.aicte-India.org


Copy

to:


Education Plot No. 1A, 5th Floor,

DTE(Pb..) Building,

Dakshin Mark, Sector 36-A,

Chandigarh-160 036

2. The Director Of Technical Education**,

Prof. A.P Mittal





Haryana

3. The Registrar**, Directorate of Technical Education


TECHNOLOGY INDUSTRIAL

AREA, SONEPAT,SONEPAT,

Haryana,131001




SONEPAT,SONEPAT,

Haryana,131001


Note: ** - Approval letter copy will not be communicated through post/email. However, provision is made in the portal for downloading

Approval letter through Authorized login credentials allotted to concerned DTE/Registrar.


Note: This is a Computer generated Report.No signature is required. Letter Printed On:7 April 2017 Printed

By : AIC003246




XVIII. Accounted audited statement:

(2020-21)MANDATORY DISCLOSUREI. NAME OF THE INSTITUTIONIII. NAME AND ADDRESS OF THE DIRECTORIV. NAME OF THE AFFILIATING BOARD/UNIVERSITYV. GOVERNANCEName of the Programmes accredited by the AICTEDetails of each ProgramNote : 10% extra seats will be added for drop out candidates.Student Feedback on Institutional Governance/ Faculty PerformanceVIII. PROFILE OF DIRECTOR/PRINCIPAL WITH QUALIFICATIONS, TOTAL EXPERIENCE, AGE AND DURATION OF EMPLOYMENT AT THE INSTITUTE CONCERNEDMob: -7988160175, 9416306251Email [email protected]

Objective:Work Experience:Technical Skills:Educational Qualifications:Job Responsibilities:Subjects Taught:Paper Presented:Personal Details:IX. FEEX. ADMISSIONCalendar for admission against vacant seats is decided by DTE and all information is given at website www.techeduhry.nic.inXIII-XIV APPLICATION FORM (for Applicants)XV. INFORMATION ON INFRASTRUCTURE AND OTHER RESOURCES AVAILABLELABORATORY:Physics Lab

Electrical WorkShopSheet Metal Shop/Paint ShopCarpentry and Pattern shopLAB: AutomobileLAB: Hydraulic MachinesLAB: Materials & MetallurgyLAB: Refrigeration & Air Conditioning

LAB- CONCRETE TECHNOLOGYLAB- CONSTRUCTION MATERIALDigital & Microprocessor Lab:M.O.E.E. LabElectronic Workshop LabGAMES AND SPORTS FACILITY:EXTRA CURRICULAR ACTIVITIES:DETAILS OF ACADEMIC FACILITIESFire Certificate1. The Regional Officer,2. The Director Of Technical Education,3. The Registrar,5. The Secretary / Chairman,6. Guard File(AICTE)(Dr. Kuncheria P. Isaac)1. The Regional Officer, (1)2. The Director Of Technical Education, (1)3. The Registrar, (1)5. The Secretary / Chairman, (1)6. Guard File(AICTE) (1)(Dr. Kuncheria P. Isaac) (1)1. The Regional Officer, (2)2. The Director Of Technical Education, (2)4. The Secretary / Chairman,5. Guard File(AICTE)Sub: Extension of approval for the academic year 2015-16Dr. Avinash S Pant Actg Chairman, AICTE1. The Regional Officer, (3)2. The Director Of Technical Education, (3)3. The Registrar, (2)5. The Secretary / Chairman, (2)6. Guard File(AICTE) (2)1. The Regional Officer, (4)2. The Director Of Technical Education, (4)3. The Registrar, (3)5. The Secretary / Chairman, (3)6. Guard File(AICTE) (3)1. The Regional Officer, (5)2. The Director Of Technical Education**,3. The Registrar**,5. The Secretary / Chairman, (4)6. Guard File(AICTE) (4)XVIII. Accounted audited statement:

hindu institute of technology,...

Documents