hinges - nover · various hinges 7.20 piano hinge 7.21 flap stays 7.22 folding door hinge 7.24...
TRANSCRIPT
NOVER PRODUCT CATALOGUE 7.1
HingesHettich Intermat/Ecomat Hinges 7.2Hettich Mounting Plates 7.9Push-to-Open 7.11Silent System 7.16Door Dampeners 7.19Various Hinges 7.20Piano Hinge 7.21Flap Stays 7.22Folding Door Hinge 7.24Fridge Door Fittings 7.25Hinge Machines & Accessories 7.26
NOVER PRODUCT CATALOGUE7.2
HINGESH
inge
s
HETTICH INTERMAT/ECOMAT HINGESMaintenance-free, robust, quiet, reliable!Sophisticated hinge technology made by Hettich. It’s external appearance indicates quality. Long service life and great ease of use round off the hinge profile.
Eccentric height adjustment• Exactdoorheightalignment
• Withoutlooseningscrews
Superflat cup design• Hugeproductrange
• Over100mountingoptions
Eccentric depth adjustment• Exactdoordepthalignment
• Withoutlooseningscrews
3mm
Concealed latch• Simple
• Safe
• Reliable
NOVER PRODUCT CATALOGUE 7.3
Hin
ges
SCREW-ON KNOCK-IN TOOLLESS FIXINTERMAT 9943 - SELF CLOSING - cranking 0mm410020 410023 410060
45mm drilling pattern
410026
INTERMAT 9943 - SELF CLOSING - cranking 9.5mm410021 410024 410061
INTERMAT 9943 - SELF CLOSING - cranking 16mm410022 410025 4100610
SCREW-ONSELF CLOSING
KNOCK-INSELF CLOSING
KNOCK-IN UNSPRUNG
ECOMAT 9843 - cranking 0mm410001 410004 410008
45mm drilling pattern
410007
ECOMAT 9843 - cranking 9.5mm410002 410005 4100081
ECOMAT 9843 - cranking 16mm410003 410006 4100082
Intermat 9943 Fast-assembly hingeOpening angle: 110°Cup diameter: 35mmPU: 200Door thickness: from 15mm• Concealedhingewithsnap-onassembly• Smallholedepthfordoorthickness15mmorlarger• Depthadjustmentviaeccentricscrew-0.5mm/+3.5mm• Heightadjustmentviamountingplate+2mm/–2mm• Cupfixingscrewø3.5x13mmnickel-plated,forcupT42
Full overlay
Half overlay
Inset
Full overlay
Half overlay
Inset
Full overlay
Half overlay
Inset
Full overlay
Half overlay
Inset
Full overlay
Half overlay
Inset
Full overlay
Half overlay
Inset
Cranking 16mm
Cranking 16mm
Cranking 9.5mm
Cranking 9.5mm
Cranking 0mm
Cranking 0mm
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Ecomat 9843 Fast-assembly hingeOpening angle: 110°Cup diameter: 35mmPU: 200Door thickness: from 15mm• Concealedhinges,snap-onassembly• Smallholedepthfordoorthickness15mmorlarger• Hingesaresnappedontothemountingplate• Depthadjustment+2mm/–2mm• Heightadjustmentviamountingplate+2mm/-2mm• Cupfixingscrewø3.5x13mmnickel-plated,forcupT42
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
NOVER PRODUCT CATALOGUE7.4
HINGESH
inge
s
Full overlay
Half overlay
120°165 °
max. 7
SCREW-ON KNOCK-IN TOOLLESS FIXINTERMAT 9956 - SELF CLOSING - cranking 0mm410030 410031 410063
unsprung 41001145mm drilling pattern
410029
INTERMAT 9956 - SELF CLOSING - cranking 9.5mm410032 410033
ADJUSTMENT SCREW PUM5x14mm 410028 50
Intermat 9956 Fast-assembly hingeOpeningangle: 165°(variablyadjustableupto120owithscrew)Cup diameter: 35mmPU: 100• Concealedwide-anglehinge,snap-onassembly• Thewide-anglehingeenablesanoptimalreveal(hairlinereveal)• Negativedoorprotrusion• Depthadjustmentviaeccentricscrew-0.5mm/+3.5mm• Heightadjustmentviamountingplate+2mm/-2mm• Cupfixingscrewø3.5x13mmnickel-plated,forcupT42
Cranking 9.5mm
Cranking 0mm
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Full overlay
Half overlay
120°165 °
max. 7
Full overlay
Half overlay
120°165 °
max. 7
HETTICH INTERMAT HINGES
Intermat 9931 Fast-assembly hingeOpening angle: 50°/90o
Cup diameter: 35mm• Concealedhinge,snap-onassembly• Forcornercabinetswithfoldingdoors• StandardHettichcupholesareusedforthedoorelements• Cutawayorspecialholesarenotrequired• Depthadjustmentviaeccentricscrew-0.5mm/+3.5mm• Heightadjustmentviamountingplate+2mm/-2mm• Cupfixingscrewø3.5x13mmnickel-plated,forcupT42
Cranking -5mm
SCREW-ON KNOCK-IN TOOLLESS FIXINTERMAT 9931 - SELF CLOSING - cranking 5mm PU4100511 410051 43045042 100
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
NOVER PRODUCT CATALOGUE 7.5
Hin
ges
Full overlay
30°
Overlay
Distance
Cup distance C
Door
Side
Full overlay
30°
Overlay
Distance
Cup distance C
Door
Side
SCREW-ONSELF CLOSING
KNOCK-INSELF CLOSING
INTERMAT 9936 W30 - cranking 7mm4100341 410034
Intermat 9936 W30 Fast-assembly hingeOpening angle: 95°Cup diameter: 35mmPU: 50• Concealedhinge,snap-onassembly,integrateddooroverlay• Forcornercupboardsandcabinetswith30°faceangle• Depthadjustmentviaeccentricscrew-0.5mm/+3.5mm• Heightadjustmentviamountingplate+2mm/-2mm
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
SCREW-ONSELF CLOSING
KNOCK-INSELF CLOSING
INTERMAT 9936 W45 - cranking 0mm410417 43108353
INTERMAT 9936 W45 - cranking 6mm410035 410036
45mm drilling pattern
4100371
INTERMAT 9936 W45 - cranking 17mm4100351 410037
Intermat 9936 W45 Fast-assembly hingeOpening angle: 95°Cup diameter: 35mmPU: 200• Concealedhinge,snap-onassembly,integrateddooroverlay• Forcornercupboardsandcabinetswith45°faceangle• Depthadjustmentviaeccentricscrew-0.5mm/+3.5mm• Heightadjustmentviamountingplate+2mm/-2mm• Cupfixingscrewø3.5x13mmnickel-plated,forcupT42
Full overlay
Half overlay
Inset
Full overlay
Half overlay
Inset
Full overlay
Half overlay
Inset
Cranking -17mm
Cranking 6mm
Cranking 0mm
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
NOVER PRODUCT CATALOGUE7.6
HINGESH
inge
s
SCREW-ONSELF CLOSING
KNOCK-INSELF CLOSING
INTERMAT 9944 - cranking 12mm4100382 4100383
Intermat 9944 W-30 Fast-assembly hingeOpening angle: 125°Cup diameter: 35mm• Concealedhinge,snap-onassembly• Forcornercupboardsandcabinetswith-30°faceangle• Depthadjustmentviaeccentricscrew-0.5mm/+3.5mm• Heightadjustmentviamountingplate+2mm/-2mm• Cupfixingscrewø3.5x13mmnickel-plated,forcupT42
Cranking 12mm
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Full overlay
60°
-30°Overlay
Distance
Cup distance C
Door
Side
Full overlay
60°
-30°Overlay
Distance
Cup distance C
Door
Side
HETTICH INTERMAT HINGES
SCREW-ONSELF CLOSING
KNOCK-INSELF CLOSING
INTERMAT 9936 W90 - cranking 5mm410040 4100400
Cranking 5mm
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Intermat 9936 W90 Fast-assembly hingeOpening angle: 95°Cup diameter: 35mm• Concealedhinge,snap-onassembly• Forcornercabinetswithblindpanels• Revealadjustmentviaeccentricscrew-0.5mm/+3.5mm• Heightadjustmentviamountingplate+2mm/-2mm• Cupfixingscrewø3.5x13mmnickel-plated,forcupT42
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Inset
NOVER PRODUCT CATALOGUE 7.7
Hin
ges
SCREW-ONSELF CLOSING
KNOCK-INSELF CLOSING
INTERMAT 9944 - cranking 12mm410038 4100381
Cranking 10mm
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Intermat 9944 W-45 Fast-assembly hingeOpening angle: 125°Cup diameter: 35mm• Concealedhinge,snap-onassembly• Forcornercupboardsandcabinetswith-45°faceangle• Depthadjustmentviaeccentricscrew-0.5mm/+3.5mm• Heightadjustmentviamountingplate+2mm/-2mm• Cupfixingscrewø3.5x13mmnickel-plated,forcupT42
Full overlay Full overlay
45°
-45°
DistanceSide
Cupdista
nce C
DoorOverlay
SCREW-ON - SELF CLOSINGINTERMAT 9924 - cranking 1mm4102065
INTERMAT 9924 - cranking 9.5mm41072965
INTERMAT 9924 - cranking 16mm4102067
Intermat 9924 Fast-assembly hingeOpening angle: 95°Cup diameter: 26mm • Concealedhinges,snap-onassembly• Forsmalldoorsandnarrowframedoors• Depthadjustmentviaeccentricscrew-0.5mm/+3.5mm• Heightadjustmentviamountingplate+2mm/-2mm• Cupfixingscrewø3.5x13mmnickel-plated,forcupT42/26
Cranking 1mm
Cranking 16mm
Cranking 9.5mm
Cup version
Cup T 42/26Screw-onNickel-plated steel
Full overlay
Half overlay
Inset
Full overlay
Half overlay
Inset
Full overlay
Half overlay
Inset
NOVER PRODUCT CATALOGUE7.8
HINGESH
inge
s
HETTICH INTERMAT HINGES
SCREW-ON - SELF CLOSINGINTERMAT 9936 - cranking 0mm410190
INTERMAT 9936 - cranking 9.5mm410191
INTERMAT 9936 - cranking 16mm410192
Intermat 9936 Alu Fast-assembly hingeOpening angle: 95°• Concealedhinge,snap-onassembly• Fordoorswithaluminiumframes• DIN7982cupfixingscrewsaresuppliedwithPU10• Depthadjustmentviaeccentricscrew-0.5mm/+3.5mm• Heightadjustmentviamountingplate+2mm/-2mm*ForPU200cupfixingscrewsneedtobeorderedseparately
Cranking 0mm
Cranking 16mm
Cranking 9.5mm
Cup Alu T 1Screw-onNickel-plated zinc diecast
Full overlay
Half overlay
Inset
Full overlay
Half overlay
Inset
Full overlay
Half overlay
Inset
SCREW-ON - SELF CLOSINGINTERMAT 9904 - cranking 1mm410080
INTERMAT 9904 - cranking 9.5mm410081
INTERMAT 9904 - cranking 16mm410082
DECORATIVE CAP AHigh gloss chrome 410091
Matt nickel 410096
DECORATIVE CAP BHigh gloss chrome 410094
Matt nickel 410097
Cranking 1mm
Cranking 16mm
Cranking 9.5mm
Cup T 1Screw-onBlack plastic
Intermat 9904 Fast-assembly hingeOpening angle: 95°Glass hole ø: 26mm• Concealedglassdoorhinge,snap-onassembly• Forglassdoorswithpanelthicknessof4-6.5mm• Foraglasspanelthicknessfrom5.5mm,order2xcupfixingscrews• Depthadjustmentviaeccentricscrew-0.5mm/+3.5mm• Heightadjustmentviamountingplate+2mm/-2mm
Full overlay
Half overlay
Inset
Full overlay
Half overlay
Inset
Full overlay
Half overlay
Inset
NOVER PRODUCT CATALOGUE 7.9
Hin
ges
HETTICH MOUNTING PLATESScrew-on Wing Mounting PlateDistance hole line: 37mm• Holedistance32mm,withoblongholesø5.4mmforheight
adjustment ±2 mm• Nickel-platedsteel/*zincdiecast• Fixingwithcountersunktimberscrewsø4.5mm• Thelengthofthescrewisdependentonthetypeoftimberbeing
used
DISTANCE TOTAL HEIGHT CODE PU0mm 9mm 4102091 400
1.5mm 10.5mm 4101645 400
3mm 12mm 4101646 400
5mm 14mm 410165 50
8mm 17mm 410170 50
Screw-on WingMountingPlate+Prefixed5mmSocketDistance hole line: 37mm• Withprefixed5mmsockets• Holedistance32mm(System32)• Nickel-platedsteel
DISTANCE TOTAL HEIGHT CODE PU0mm 9mm 410110 400
1.5mm 10.5mm 4101101 400
3mm 12mm 410111 400
Screw-on Wing Mounting PlateDistance hole line: 37mm• Holedistance32mm,withpremounteddirectfixingscrewsforholes
ø5x12mm• Oblongholesforheightadjustment±2mm• Nickel-platedsteel/*zincdiecast
DISTANCE TOTAL HEIGHT CODE PU0mm 9mm 410101 400
1.5mm 10.5mm 4101011 400
3mm 12mm 410102 400
5mm 14mm 410103 50
8mm 17mm 410104 50
37
32
3732
Screw-on Wing Mounting Plate• Holedistance32mm,forframedoorswithoverlay• Oblongholesforheightadjustment±2mm• Nickel-platedzincdiecast
DISTANCE TOTAL HEIGHT CODE PU0mm 8.2mm 4101043 50
3732
ø5
12
32
Side
Frame
Door
NOVER PRODUCT CATALOGUE7.10
HINGESH
inge
s
HETTICH MOUNTING PLATES
5mm
3mm
10mm
Distance Spacer PlateDistance hole line: 37mm• Distancespacerplateforwingmountingplate• Silver-greyplastic• Distancespacerplatesmayonlybeused
with3,5and10mmwingmountingplates
DISTANCE CODE PU3mm 4101045 50
5mm 410105 50
10mm 410106 50
3
5
10
3
5
10
3
5
10
Screw-on Wing Mounting Plate - Hettich TopDistance hole line: 37mm• “HettichTop”forfulloverlayapplications• Suitableforsidepanelthicknessesof15mmandover• Withspecialpremountedscrewsandplasticsocketsfordrilling
ø5x12mmdrillholes• Eccentricheightadjustment±2mm• Nickel-plated/die-castzinc
DISTANCE CODE PU0mm 419046596 400
1.5mm 419046394 400
InLine Knock-in Mounting PlateDistance hole line: 20mm• Holedistance32mm• Fordrillholesdiameter10x11.5mm,parallel• Eccentricheightadjustment±2mm• ForIntermatandEcomathinges• Nickel-platedsteel/*zincdiecast
DISTANCE CODE PU1.5mm 4104350 400
3mm 410120 400
32
11,5
ø10
20
Angle PlateDistance hole line: 37mm• Forwingmountingplate• Silver-greyplastic• Simplyturntheplasticanglemountingplates
to either increase or decrease the cabinet angle
• Plasticanglemountingplatesarestackable• Angleplatesmayonlybeusedwith5o, 10o
and 15owingmountingplates
DISTANCE CODE PU5O 410107 50
10O 410108 50
5o
10o
15°5° 10°
32
37
min.15
12
ø5
NOVER PRODUCT CATALOGUE 7.11
Hin
ges
PUSH-TO-OPEN
Designingwithouthandles–sleek,unadorned furniture fronts are seen as the ultimate in modern furnishing
concepts.
More of a geometric room sculpture than furniture - this is a successful
design formula. It’s exquisite woods,steelandlacquerthatmakeastatementontheoutside,thenconcealedwithin,thehardware
functions quietly and unobstrusively.
Push-to
-Ope
n
P2O MagnetAslightpressofthefingeronthedoorisallittakesforthemechanismtoreleaseandopenitautomatically.P2OMagnetisassistedbyaspecialspringmechanismintheIntermatP2Ohinges.Withdifferentfittingmethodstochoosefrom-recessedorscrew-on-P2OMagnetiseasilycombinedwithawiderangeofdoorformatsandmountingoptions.
P2O PinWithP2O(Push-to-Open)Pin,theworkingcomponentsconsistofahousingscrewedto the carcase side and a pin drilled into the door. This is released on applying slight pressuretothefurnituredoorwhichthenopensautomatically.P2OPinalsoworkswithspecialhingesfromtheIntermatP2Orange.Intheclosedposition,thedoorisheldsecurelyinplace-ideal,forinstance,incaravanormarinefurniture...
P2OUniversalWiththisoptiontoo,aslightpressofthefingerisallthat’sneededforthedoortoconvenientlyopen.Asupportelement,whichsimplyscrewstothecarcase,acceptstheactualdooropeningmechanismwithouttheneedfortools.P2O(Push-to-Open)UniversalcanbecombinedwithallconcealedhingesfromtheIntermat,EcomatandSlide-onrange.Theextra-longopeningmechanismworksagainsttheself-closingfeature.
NOVER PRODUCT CATALOGUE7.12
HINGESH
inge
s
PUSH-TO-OPEN
ø3,5 x 13
Assembly
rood tesnIrood yalrevO
6,53
10,5
81
19,5
± 2,5
16 19 13 21
14,5
32
6,53
10,5
81
19,5
± 2,5
16 19 13 21
14,5
32
P2O UniversalColour: Grey plastic• Door-openingsystemforhandlelessfurnituredoors• Overlayandinsetdoors,fordoorwidthsof300-600mmanddoor
heights of 300-2400mm• Canbeusedwithconcealedhingesfromthefollowingranges:
Intermat, Ecomat & Slide-on
DESCRIPTION CODE PUP2OUniversal 4100191 100
Refer to page 7.15 for P2O hinges.
P2O Magnet• Door-openingsystemforhandlelessfurnituredoorsfordrilling
intooverlaydoors• CanonlybeusedinconjunctionwithIntermatP2O fast-
assembly hinges• Fordoorwidthsof300-600mmanddoorheightsof
300-900mm• Plastic,self-colour
DESCRIPTION CODE PUP2O Magnet 410019 100
Knock In Striker Plate 43040309 25
Refer to page 7.15 for P2O Hinges
± 6,3
± 3,3
± 6,3
± 3,3
2,5
ø10
ø10
41
6,5
Assembly
Overlay door Circular plate
16 1
10
8
NOVER PRODUCT CATALOGUE 7.13
Hin
ges
P2O Magnet XL LinearColour: Grey plastic• Door-openingsystemforhandlelessfurnituredoorsforoverlayand
insetdoorscanonlybeusedinconjunctionwithIntermatP2Ofast-assembly hinges
• Fordoorwidthsof300-600mmanddoorheightsof900-1600mmwithinfiniteadjustmentofdoorrevealfrom2.3-5.3mm
DESCRIPTION CODE PUP2O Magnet XL Linear 43040308 25
Refer to page 7.15 for P2O hinges.
P2O PinColour: Grey plasticBoxquantity: 100• Door-openingsystemforhandlelessfurnituredoorsforoverlay
doors• CanonlybeusedinconjunctionwithIntermatP2Ofast-
assembly hinges• Fordoorwidthsof300-600mmanddoorheightsof
300-2400mm
DESCRIPTION CODEP2O Pin 4100190
Refer to page 7.15 for P2O hinges.
14,7
2,3 ø5
10
14,7
2,3 ø5
10
55
19,5
16 32
55
19,5
16 32
rood tesnIrood yalrevO
13
153
ø5
32
± 1,514,5
10
± 2,56,5
ø5 10
ø8
21
53
± 1,75
Assembly
Overlay door
13
153
ø5
32
± 1,514,5
10
± 2,56,5
ø5 10
ø8
21
53
± 1,75
Assembly
Overlay door
NOVER PRODUCT CATALOGUE7.14
HINGESH
inge
s
P2O Magnet XL• Door-openingsystemforhandlelessfurnituredoorsforoverlay
doorscanonlybeusedinconjunctionwithIntermatP2Ofast-assembly hinges
• Fordoorwidthsof300-600mmanddoorheightsof900-1600mm
DESCRIPTION CODE PUP2O Magnet XL 43040307 25
13,3
40
3,6
2,9
ø4
± 6,3
± 3,3
± 6,3
± 3,3
16,2
10
32 50
7
Assembly
Overlay door Circular plate
16 1
10
8
PUSH-TO-OPEN
NOVER PRODUCT CATALOGUE 7.15
Hin
ges
Intermat 9943 P2OOpening angle: 110°Cup diameter: 35mm• Concealedhingeswithnegativespring,snap-onassembly• Thehingeenablesanoptimumreveal(hairlinereveal)forprofile
doors• Hingesaresnappedontothemountingplate• Depthadjustmentviaeccentricscrew–2.5mm/+1.5mm• Heightadjustmentviamountingplate+2mm/–2mm
Intermat 9956 P2OOpeningangle: 165°(variablyadjustableupto120owithscrew)Cup diameter: 35mm• Concealed,wide-anglehingeswithnegativespring,snap-on
assembly• Thewide-anglehingeenablesanoptimalreveal(hairlinereveal)• Negativedoorprotrusion• Depthadjustmentviaeccentricscrew–2.5mm/+1.5mm• Heightadjustmentviamountingplate+2mm/-2mm• Cupfixingscrewø3.5x13mmnickel-plated,forcupT42
Full overlay
Half overlay
Inset
Full overlay
Half overlay
Inset
Full overlay
Half overlay
Inset
KNOCK-ININTERMAT 9943 - cranking 0mm410015
INTERMAT 9943 - cranking 9.5mm410016
INTERMAT 9943 - cranking 16mm410017
SCREW-ONINTERMAT 9956 - cranking 0mm4100333
ADJUSTMENT SCREWM5x14mm-50pcs 410028
Cranking 0mm
Cranking 0mm
Cranking 16mm
Cranking 9.5mm
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Cup T43Press-in Nickel-plated steel
Cup TH FIXToolless withpegs Nickel-plated steel
Cup T42Screw-on Nickel- plated steel
Full overlay
120°165 °
max. 7max.
Full overlay
120°165 °
max. 7max.
NOVER PRODUCT CATALOGUE7.16
HINGESH
inge
s
SILENT SYSTEM
Precisely adjusted cushioned closure -
The cushioning effect on all three versions can be adjusted using thesettingwheel–tosuitpersonalperceptionaswellasdoorsizeandweight!
Convenient, for clipping on
•Suitablefortimberandaluminium framed doors
•ClipsontotheIntermathingearmwithouttheneedfortools
•Rightorleft-hungdoors–makesno difference
•Foroptionaluseandeasilyretrofitted
In next to no time, for screwing on
•Thedoorbufferisscrewedtothe cupboard’s top or bottom panelwithtwotimberscrewswithouthavingtodrillholesfirst
•AlsosuitableforIntermatfast-assemblyhinges,includingspecial door mounting options.
Silent System for Intermat Hinges–withthecushioningsystemcomespeaceCushionedclosure:shuttingcupboarddoorsinarush creates noise in the home. The doors slams against the cupboard
carcase. Silent System closes furniture doors quietly and gently. Forimmediatepeaceandquiet,enhancinglivingcomfort!
Canbefittedatanytime:thedoorbufferisinstalledeitherduringproductionorlateronbythefitterwhenfurnitureisassembled.
NOVER PRODUCT CATALOGUE 7.17
Hin
ges
Clip-on Door Buffer• Foroverlaydoors(cranking0mm)• Cushioningeffectinfinitelyadjustableatsettingwheel• Nickel-platedzincdie-casthousing• Complementshinges: Intermat9943/9943FIX Intermat 9944/9944 FIX Intermat 9936/9936 FIX
DESCRIPTION CODE PUSilent System clip-on door buffer
419046469 200
Cranking 0mm
Assembly
Disassembly 2
2
1
1 X
Door
hei
ghts
up
to24
0020
0016
00
Door width up to 600 mm mm
Recommended number of buffers per doorGuide values for 19 mm chipboard panels witha density of 750 kg/m3
900
NOVER PRODUCT CATALOGUE7.18
HINGESH
inge
s
Screw-on Door Buffer• Suitableforoverlaydoorapplications• Simplyscrewstotoporbottomcarcasepanel• Cushioningeffectinfinitelyadjustableatsettingwheel• Nickel-platedzincdie-casthousing• Complementshinges: Intermat9943 Ecomat 9843 Intermat 9944 Intermat 9936/9936 W20-W90 Intermat 9956
DESCRIPTION CODE PUSilentSystemscrew-ondoor buffer
419046472 200
Assembly
2
2
1
1 X
Door
hei
ghts
up
to24
0020
0016
00
Door width up to 600 mm mm
Recommended number of buffersper doorGuide values for 19 mm chipboardpanels with a density of 750 kg/m3
900
1
60
23
24
1
60 32
20
X10
5
20Door buffer for overlay door
Zhtdiw rooDegniH
up to 450 mm 18 mmup to 600 mm 24 mm
Intermat 9956 up to 300 mm 26 mmup to 450 mm 34 mmup to 600 mm 40 mm
Formula for calculating dimension X
Dimension X = Z + distance from mounting plate + hinge cranking
Intermat 9943Ecomat 9843Intermat 9944Intermat 9936/9936 W20-W90
SILENT SYSTEM
NOVER PRODUCT CATALOGUE 7.19
Hin
ges
DOOR DAMPENERS
Door Dampener AdapterColour: WhiteSize: 13x53mmFixingPosition: 19x22mmMaterial: PolycarbonateLiner adapter for door dampener
DESCRIPTION CODEMDS 031 100765
Door Dampener AdapterColour: WhiteSize: 47x53mmFixingPosition: 37x32mmMaterial: Polycarbonate Cruciform adapter for door dampener
DESCRIPTION CODEMDS037 100775
Door Dampener AdapterColour: WhiteSize: 47x53mmFixingPosition: 13.5x32mmMaterial: Polycarbonate Cruciform adapter for door dampener
DESCRIPTION CODEMDS033 100770
Side DampenerMaterial: Polycarbonate, AcetalColor: GreyTravelDistance: 12.5mmFixingposition: 37x32mmDimension: 76x46x22mm• Onedamperwithtwohingessystem• Suitableforallkindofhinges• Widerangeofinstallingpositions• Easyinstallationwithrefineddesign• Reducetheclosingspeedbythedamper
withtwo-stepmovement• SuitsS32drilling• Adjustableforsmallerdoors
DESCRIPTION CODEMHS-052 100780
Door DampenerColour: WhiteDimension: ø10x51mmDrilling: ø10x52mmMaterial: Polycarbonate(body),NBR
(bumper)
DESCRIPTION CODENover 100760
76
22
32 46
Dampingsystem,suitedtoneworretrofit to existing doors. Suitableforallkindsoffurniture doors. Use twodampersfordoorsover 1000mm in height.
NOVER PRODUCT CATALOGUE7.20
HINGESH
inge
s
VARIOUS HINGESSemi ConcealedHingewithCatchDESCRIPTION CODEAntiqueBronze(perpair)
450399
Spring Lift-up HingeDESCRIPTION CODEper pair 451310
Bommer HingeSize: 100mm• Doubleactionspringhinges• 100mmwhichisfordoosupto3mmand
has a lead bearing of 20kg per pair• Theseweightrecommendationsarewith
theuseoftwohinges• Australianmade,offeringsuperiorquality• Requiresnohangingstrip
DESCRIPTION CODESatin Chrome - pair XB100
NOVER PRODUCT CATALOGUE 7.21
Hin
ges
Piano HingeLength: 2m
DESCRIPTION CODEFlorentineBronze 451615
Electro Brass 451620
Nickel 451625
Stainless Steel 451640
PIANO HINGEPiano HingeLength: 25m roll
DESCRIPTION CODEFlorentineBronze 451600
Electro Brass 451605
Nickel 451610
Stainless Steel 451645
Piano HingeScrewsQuantity: 1000perboxType: Chipboardscrews,longthread5/8x4g
DESCRIPTION CODEFlorentineBronze 5612945
Electro Brass 5612943
Zinc 561294
FlorentineBronze
Electro Brass
Nickel
Stainless Steel
NOVER PRODUCT CATALOGUE7.22
HINGESH
inge
s
FLAP STAYSTop BoxStays• KLS10/200topboxstaywithscrew-on
housing and base• Theflapisheldopenbyacatch.Lifting
the flap slightly releases the catch. An indent in the the tie bar keeps the lid shut.
• Supportbar,supportandbase:nickel-plated steel
• Housing:whiteplastic• Flapweightmax.6kg• Assemblynote:TheridgeMmustalways
be in front at the bottom
DESCRIPTION CODEKLS 10/200 43013239
Top BoxStays• KLS30/250topboxstaywithscrew-onsupportandbase• Theflapweightisbalancedbyaspringandtheflapisheldsecurely
closed.• Adjustablespringforce• Nickel-platedsteel• Assemblynote:IncreasingXslightlydecreasestheopeningangle
DESCRIPTION CODEKLS 30/250 4300105
QuantityofKLS30tobeusedondifferentflapsizes
DOOR DOOR MATERIAL THICKNESSHEIGHT WIDTH 16mm 19mm
260 450 1
260 500 1
260 600 1
300 450 1 1
300 500 1 1
300 600 1 1
400 450 1 1
400 500 1 1
400 600 1 2
500 450 2 2
500 500 2 2
500 600 2 2
* Based on chipboard
44
M
3714
192.5
A
X=232-A
32
32
6737
Mounting exampleMounting example
Intermat 9943 Intermat 9943
44
M
3714
192.5
A
X=232-A
32
32
6737
Mounting exampleMounting example
Intermat 9943 Intermat 9943
NOVER PRODUCT CATALOGUE 7.23
Hin
ges
Top BoxStayLift105Cabinetsize:Height: 300 - 500mm*Inside depth: min. 75mmWidth: 300 - 1200mm**exteriordimension• Canbeusedinconjunctionwithtimber/timber-
framedfrontsaswellaswithaluminiumframefronts 55 mm straight
• ForuseinconjunctionwithIntermat,Ecomator Slide-on hinges
• Maximumflapweight:8,6kg• Max.openingangle:105°-flapsare
reliably held open at any position from an opening angle of approx.45°
• Springforceinfinitelyadjustable
• Nickel-plated/die-castzinc
• 1setcontains:1eachflapfittingrightorleftfixingaccessories
DESCRIPTION CODE PULift 105 Right 43049917 1
Lift 105 Left 43049918 1
Lift 90TopBoxFlapSupport• 180Nspringforce,orinfinitelyadjustablefrom80to220N• Openingangle90°• Theflapswingsopen
90° and is held open in thispositiontoprovideoptimal access to the cabinet interior.
• Efficientholelineassembly
• Nickel-platedsteel• Topboxflapsupport
availableonlyasasetconsisting of a left-hand andright-handfitting
• Maxflapweight:3.3kg
DESCRIPTION CODE PU180N 439276 10 sets
NOVER PRODUCT CATALOGUE7.24
HINGESH
inge
s
Folding Door Hinge withOffsetPivot• Openingangle180°• Pivotoffsetadjustmentinstepsof0mm,3mmand6mm• Therevealisadjustablefromhairlineto+4mm• Themountingisalwaysflush• Identicalholepatternforbothdoors,hingepartsaremounted
separately• Nickel-plateddie-castzinc
DESCRIPTION CODE PUScrew-in 430011 10 pcs
Press-in 433012 10 pcs
FOLDING DOOR HINGE
Mounting example Hole pattern press-in
Pivot offset Door offset
mm 0mm0mm 6mm 3
6 mm 12 mm
0 3 6 mm
5.5
52
12
ø10 x 11 5.5
35 52
5
22.5
Hole pattern screw on
Fixing countersunk screwø 3.5 x 16 mm, nickel-plated, for Cup T 42,
12
5.5
35 52
5
22.5
Door offset
Pivot offset
Pivot adjustmentReveal adjustment
Example:For 3 mm reveal:
NOVER PRODUCT CATALOGUE 7.25
Hin
ges
Attach the guide on the outer edge of the refrigerator door.
With the refrigerator door openat 90° insert the slide into the guide. Screw the guide horizontally on the inside of the cabinet door.
Depending on the size of the appliance dooreither one or two fittings may be required.
* ***16
33
12.5
5
1-2
Mounting example
Fridgedoor Cabinet
door
Fridge door
FridgeCabi
net
Cabinet door
Attach the guide on the outer edge of the refrigerator door.
With the refrigerator door openat 90° insert the slide into the guide. Screw the guide horizontally on the inside of the cabinet door.
Depending on the size of the appliance dooreither one or two fittings may be required.
* ***16
33
12.5
5
1-2
Mounting example
Fridgedoor Cabinet
door
Fridge door
FridgeCabi
net
Cabinet door
FRIDGE DOOR FITTINGSET 582 Special Purpose Hinge for Fridge CabinetsOpening angle: 95°Cup diameter: 35mmCup depth: 12.8mm• Self-closing• Completewithmountingplateandclip-onplasticspacer• Plasticspacerincreasesplatedistanceby3mm
DESCRIPTION CODE PUHinge 43072134 10 pcs
Fridge DoorFixingMechanismThismechanismisusedforfixingtheappliancedoortoafrontpanel,whereappliancessuchasrefrigeratorsarebuiltintothekitchencabinets.Itactsasaslidingmechanismandallowsyoutoopenthedoorofthecabinetwhichinturnopensthedoorofappliance.Themechanismisverysimpleinitsapplicationandrequiresminimumfixing.
DESCRIPTION CODE PUDoor mechanism 4348951 1 pc
Mounting example
Hole pattern
Cup T 22screw-onC = 3-5mm
Mounting plate assembly, 33mm from cabinet front edgeOverlay 14.5mm for distance 3mmand C distance 4.5mm
C distance Overlay
3.0mm 13.0mm3.5mm 13.5mm4.0mm 14.0mm4.5mm 14.5mm5.0mm 15.0mm
Mounting plate + plastic spacer = distance 3mm
C distance Overlay
3.0 mm 16.0mm3.5 mm 16,5mm4.0 mm 17.0mm4.5 mm 17.5mm5.0 mm 18.0mm
Mounting plate = distance 0mm
5.5
52
ø35
12.8
C
* ***16
33
12.5
5
32 465266
88
12.8
Mounting example
Hole pattern
Cup T 22screw-onC = 3-5mm
Mounting plate assembly, 33mm from cabinet front edgeOverlay 14.5mm for distance 3mmand C distance 4.5mm
C distance Overlay
3.0mm 13.0mm3.5mm 13.5mm4.0mm 14.0mm4.5mm 14.5mm5.0mm 15.0mm
Mounting plate + plastic spacer = distance 3mm
C distance Overlay
3.0 mm 16.0mm3.5 mm 16,5mm4.0 mm 17.0mm4.5 mm 17.5mm5.0 mm 18.0mm
Mounting plate = distance 0mm
5.5
52
ø35
12.8
C
* ***16
33
12.5
5
32 465266
88
12.8
NOVER PRODUCT CATALOGUE7.26
HINGESH
inge
s
5,53252
32
RL R LL
R
LL
HINGE MACHINES & ACCESSORIESBlue MaxMiniType3• 6-spindleboringheadwithintegrateddrillingdepthstop(13mmpre-
adjusted)• 230V/50Hz/1-phase/1.3kWor400V/50Hz/3-phase/1.1kW• Timberworktop• Fenceand2pendulumstops• Pneumaticstrokemovementandhold-down• Insertionunit• Dustremoval• 3pre-adjustedfixedstopsforfence• Quickreleasechucksfordrilling+inserting:• Fordrillingandinserting: Intermat-,Ecomatandslide-onhinges Mounting plates InnoTech and MultiTech front connector
DESCRIPTION CODE PUSingle Phase 43040675 1
Three Phase 43040676 1
5,5
52
L LR
32
LR
32
R
32
1. Hinges(Cupdistance4.5mm)
2. MultiTech front connector
(14.5mmoverlayoncabinetsidepanel)
3. Mounting plates and InnoTech front connectors
(14.5mmoverlayoncabinetsidepanel)
Blue Max8HingeInserterProcessingholesfor: • System32,continuously • Mountingplates • Slides Quadro Ball-bearing slides KA Roller runner systems FR • Cams VB(Insertingpossiblewithaccessories) Rastex(Drillingandinsertingpossiblewithaccessories)Drillingandinsertingof • Hinges Intermat Ecomat Slide-on• 8-spindleboringhead• 5spindlesforholelineborings• Motorpowerrating1.6kW(2.1HP)• Powersupply400V/50Hz/3-phase• Optionforretrofithorizontalboringunit• Aluminiumworktop• Stopsystemswith3fixedand2tiltstops• Pneumaticstrokemovement• Pneumatichold-down• Insertionunit• Footpedal• Dustremoval• IncludinguniversaldieforinsertingIntermat-Ecomat-andSlide-on-hinges• Quickreleasechucks
DESCRIPTION CODE PU8 Hinge Insertion 43061234 1
NOVER PRODUCT CATALOGUE 7.27
Hin
ges
5,5
5232
L LR
L
20
LL
32
Blue MaxMiniType2/6Inprocessingholesfor • Hinges Intermat Ecomat Slide-on • Mountingplates • Camfittings VB• 6-spindleboringhead• Motorpowerrating0.75kW(1HP)• Powersupply230V/50Hz/1-phase• Timberworktop• Fenceand2pendulumstops• Handlever• Dustremovement
DESCRIPTION CODE PUType 2/6 43020266 1
Blue Max/BlueMaxMiniAccessoriesDESCRIPTION CODE PUExtensionfencewithscale 2000mm
4361268 1
Tilt stop, right hand 439054 1
Tilt stop, left hand 439056 1
Pendulum stop for fence, for right or left hand use
43061285 1
Maxistop 43051502 1
Workingwith“MaxiStop”system–forexampleMultiTechfrontconnector: 1. Adjustmentofdistanceinfromedge(8,5mm+overlay)–onlyonce! 2. Drilling of both holes for MultiTech front connectors in one step by using…
…the blue stop for MultiTech height 86
…the green stop for MultiTech height 118
…theyellowstopforMultiTechheight 150
…the red stop for MultiTech height 214
MaxiStop Tilt stop
NOVER PRODUCT CATALOGUE7.28
HINGESH
inge
s
HINGE MACHINES & ACCESSORIESBlue Max/BlueMaxMiniAccessoriesDESCRIPTION CODE PUDrill bit retainer for quick release chucks
439007 1
Universaldieforhinges
439213 1
Die for multitech 86/118/150 & 214 front connector
43040129 1
439213
439007
HINGE MACHINES & ACCESSORIES
Hinge Boring Drill• Formultispindlemachines• Suitablealsofrobenchpressandsecuredhanddrill• Notsuitableforportableroutingmachines
DESCRIPTION CODEHinge Machine 555008
Machine BitsHinge hole cutter, 35mm.
DESCRIPTION CODERIGHT HAND - BLACK 56mm5mm 555090
8mm 555101
10mm 555105
LEFT HAND - ORANGE 56mm5mm 555095
8mm 555102
10mm 555107
Right5mm
Left5mm
8mm
8mm
10mm
10mm
NOVER PRODUCT CATALOGUE 7.29
Hin
ges
Multi Blue Hole Marking GaugeSmall and easy to use, yet multifunctional, the simple Multi Blueholemarkinggaugeistheperfectaidtoon-siteassemblywheneverafittinghastobeprofessionallymountedwithoutthehelpoflarge machinery.The Multi Blue double-sided hole marking gauge can be usedfor marking out:• System32holelinesfor• Mountingplates• Dowels• Shelfsupports• Cupdrillingsdiameter35and26withdimensionC4mmforhinges• Holesdiameter25and20forconnectingfittings
DESCRIPTION CODE PUMulti-hole marking gauge
432754 1
Marking position for holes 32 mm apart
ø 5
32
37
ø5
37
Hole marking positions for cup diameter 35 mm and cup distance C = 4 mm
ø 35
21,5
4
37
21,5
Hole marking positions for cup diameter 26 mm and cup distance C = 4 mm
ø26
4
17
28
17
33,5
ø25 28
33,5
Hole marking positions for hole ø 20 mm (e. g. connecting fitting VB 35 M/VB 135)
9,5+0,5
ø20 37
9,5
Hole marking positions for hole ø 25 mm (e. g. connecting fitting Rastex 25)