history of sensor ppt
TRANSCRIPT
-
8/11/2019 HISTORY OF SENSOR Ppt
1/37
History of biosensor development
Prof Leyland C Clark in 1956 - published his definitive paper onthe oxygen electrode.
In 1962 Clark and Lyons - enzyme electrode.
In 1969 development of first potentiometric biosensor.
In 1974 - the use of thermal transducers for biosensors.
In 1975 - Divis suggested that bacteria could be used as thebiological element in microbial electrodes .
-
8/11/2019 HISTORY OF SENSOR Ppt
2/37
Cont..
Since the early 1970 - building of immunosensor.
Peterson in 1980 - First fibre optic pH sensor.
In 1982 - First fibre optic-based biosensor for glucose detection.
In 1983 - First surface plasmon resonance (SPR) immunosensor.
In 1984 - First mediated amperometric biosensor.
-
8/11/2019 HISTORY OF SENSOR Ppt
3/37
WHAT IS BIOSENSOR?
BIOSENSOR IS A SENSING DEVICE WHICH CANCONVERT A BIOLOGICAL RESPONSE INTO ANELECTRICAL SIGNAL.
THE NAME BIOSENSOR SIGNIFIES THAT THEDIVECE IS A COMBINATION OF TWO PARTS :
1. BIO ELEMENT2. SENSOR - ELEMENT
-
8/11/2019 HISTORY OF SENSOR Ppt
4/37
Components of biosensor
Fig. 1 Configuration of a biosensor showing biorecognition,interface, and transduction elements.
-
8/11/2019 HISTORY OF SENSOR Ppt
5/37
Principle of detection A specific bio element recognizes a specific
analyte. The sensor element transduces the change in the
biomolecule into an electrical signal that can beamplified, displayed, and analyzed.
The bioelement may be an enzyme, antibody, living
cells, tissue, etc. The sensing element may be electric current,
electric potential, intensity, mass, conductance,
impedance, temperature and so on.
-
8/11/2019 HISTORY OF SENSOR Ppt
6/37
Kinds of biosensor
Elect rochemical b iosensor
Optica l b iosensor
Piezoelec t r ic b iosensor
Calor imetr ic b iosensor
-
8/11/2019 HISTORY OF SENSOR Ppt
7/37
APPLICATION OF BIOSENSOR
P o i n t o f c a r e d i a g n o s t i c s .
B a c t e r i o lo g i c a l d e t e c t i o n
I n M e d i c a l C a r e
F o r d e t e r m i n at i o n o f f o o d q u a l i t y
E n v i r o n m e n t a l m o n i t o r i n g .
F o r I n d u s t r i a l P r o c e s s C o n t r o l .
-
8/11/2019 HISTORY OF SENSOR Ppt
8/37
If I want to measuresomething small, Ineed something
small
-
8/11/2019 HISTORY OF SENSOR Ppt
9/37
BIOSENSOR AND NANOTECHNOLOGY
Nanotechnology will enable us to designsensors that are :
much smaller
less power hungry
more sensitive
-
8/11/2019 HISTORY OF SENSOR Ppt
10/37
What Is Nanotechnology?
Richard Feynmans(1918-1988)
A nanometre is 1/1,000,000,000 (1 billionth) of a metre, which is around
1/50,000 of the diameter of a human hair or the space occupied by 3-4 atomsplaced end-to-end.
A few carbon atoms on thesurface of highly oriented
pyrolytic graphite (HOPG). Imageobtained by Scanning Tunneling
Microscope (STM).
nanotechnology is a field to understand, create, anduse structures, devices and systems that havefundamentally new properties and functions becauseof their nanoscale structure.
-
8/11/2019 HISTORY OF SENSOR Ppt
11/37
Tools In Nanotechnology
The main tools used in nanotechnology are fourmain microscopes1 Transmission Electron Microscope (TEM)2 Atomic Force Microscope (AFM)3 Scanning Tunneling Microscope (STM)
3 Scanning Electron Microscope (SEM)
-
8/11/2019 HISTORY OF SENSOR Ppt
12/37
NANOMATERIALS Nanostructured materials have been successfully used in the last
years for the construction of fast, accurate and sensitive sensors asthey have excellent properties.
Carbon nanotubes, nanowires, and nanochannels, Quantum dots,nanoparticles are all examples of nanomaterials.
(The small size of allows for a greater surface to volume ratio)
Carbon
nanotubes
Fullerene
Dendrimers
-
8/11/2019 HISTORY OF SENSOR Ppt
13/37
Nanostructures Map
-
8/11/2019 HISTORY OF SENSOR Ppt
14/37
Graphene oxide
Graphite when treated with strong oxidizers gives rise to the Graphite oxide ,which is a compound of carbon , oxygen , and hydrogen in variable ratios.
Manufacture of Graphene Oxide Graphene Oxide is formed by oxidizing crystalline graphite with a mixture of
sodium nitrate (NaNO 3 , sulfuric acid (H 2SO4 ),and potassium permanganate(KMnO4 ).The oxidation method is also known as the Hummers method.
Structurally, the Graphene Oxide is similar to a graphene sheet with its basehaving oxygen-containing groups. Since these groups have an high affinity towater molecules, Graphene Oxide is hydrophilic and can be easily dissolved in
water.
http://en.wikipedia.org/wiki/Carbonhttp://en.wikipedia.org/wiki/Oxygenhttp://en.wikipedia.org/wiki/Hydrogenhttp://www.azonano.com/ads/abmc.aspx?b=5265http://www.azonano.com/ads/abmc.aspx?b=5265http://www.azonano.com/ads/abmc.aspx?b=5265http://www.azonano.com/ads/abmc.aspx?b=5265http://www.azonano.com/ads/abmc.aspx?b=5265http://www.azonano.com/ads/abmc.aspx?b=5265http://en.wikipedia.org/wiki/Hydrogenhttp://en.wikipedia.org/wiki/Oxygenhttp://en.wikipedia.org/wiki/Carbon -
8/11/2019 HISTORY OF SENSOR Ppt
15/37
Cont
Graphene Oxide is a poor conductor but when it undergoes treatment usingheat, light, or chemical reduction, most of graphene's properties are restored.Chemical reduction is normally done using hydrazine.
It is possible to deposit Graphene Oxide films on any substrate, and thenconvert it into a conductor. These coatings may be used in solar cells, flexibleelectronics, chemical sensors, liquid crystal devices
Graphene, which is a conductor, graphene oxide is a semiconductors and canreplace silicon in electronics applications.
http://www.azonano.com/ads/abmc.aspx?b=5265http://www.azonano.com/ads/abmc.aspx?b=5265http://www.azonano.com/ads/abmc.aspx?b=5265http://www.azonano.com/ads/abmc.aspx?b=5265 -
8/11/2019 HISTORY OF SENSOR Ppt
16/37
cont..
Applications of Graphene Oxide Graphene oxide finds application in the
following fields: Transparent conductive films Paper-like and composite materials
Energy-related materials Biological and medical applications .
http://www.azonano.com/ads/abmc.aspx?b=5265http://www.azonano.com/ads/abmc.aspx?b=5265 -
8/11/2019 HISTORY OF SENSOR Ppt
17/37
Graphene Graphene, is one of the allotropic forms of carbon.
It is a one-atom-thick planar sheet of carbon atoms that are densely packed in a honeycombcrystal lattice.
Graphite itself consists of many graphene sheets stacked together.
The carbon-carbon bond length in graphene is approximately 0.142 nm.
-
8/11/2019 HISTORY OF SENSOR Ppt
18/37
Graphene production
Researchers obtained relatively large graphene sheets bymechanical exfoliation (repeated peeling) of 3D graphitecrystals.
Another method is to heat silicon carbide to high temperatures(1100 C) to reduce it to graphene.
Graphene has excellent properties like:Its entire volume is exposed to its surrounding.
High electrical conductivity.
-
8/11/2019 HISTORY OF SENSOR Ppt
19/37
The functionalized graphene biosystems
Nucleicacids
Avidin- biotin Peptide
Cells
Aptamers Bacteria
Proteins
-
8/11/2019 HISTORY OF SENSOR Ppt
20/37
Nanofabrication methods
-
8/11/2019 HISTORY OF SENSOR Ppt
21/37
BIOSENSOR AND CANCER Cancer is an abnormal and an uncontrolled cell growth
due to an accumulation of specific genetic andepigenetic defects.
Biosensor technology has the potential to provide: fast and accurate detection. reliable imaging of cancer cells.
monitoring of angiogenesis and cancer metastasis.
ability to determine the effectiveness of anticancerchemotherapy agents.
-
8/11/2019 HISTORY OF SENSOR Ppt
22/37
Preexisting technology
Existing cancer screening methods include: (1) the CA 15.3 test and mammography to detect breast
cancer in women. (2) prostate-specific antigen (PSA) level detection in blood
sample for men to detect prostate cancer. (3) blood detection for colon cancer.
(4) endoscopy, CT scans, X-ray, ultrasound imaging andMRI for various cancer detection.
-
8/11/2019 HISTORY OF SENSOR Ppt
23/37
Cont
These traditional diagnostic methods howeverare not very powerful methods :-
as they can not detect cancer at very earlystages.
some of the screening methods are quite costlyand not available for many people.so use of biosensors to detect cancer biomarkersin serum has spread widely.
-
8/11/2019 HISTORY OF SENSOR Ppt
24/37
Biomarkers
In terms of cancer, the analyte being detected bythe biosensor is a tumor biomarker.
A biomarker is an indicator of a biological state ofdisease.
Biomarkers can be DNA, RNA, or protein (i.e.,hormone, antibody, oncogene, or tumorsuppressor).
-
8/11/2019 HISTORY OF SENSOR Ppt
25/37
Fig. Application of the biosensor. The use of biosensors todetect tumor markers in serum has spread widely (Jin, 2011).
-
8/11/2019 HISTORY OF SENSOR Ppt
26/37
OBJECTIVES
Surface modification of nanoporous membrane bygraphene oxide Characterization of graphene coated nanoporous
membrane by SEM Immobilization of antibody on nanoporous membrane Characterization of immobilized nanoporous
membrane.
Fabrication of nanoimmunosensor. Detection of sample. Standardization of protocol of nanoimmunosensors
-
8/11/2019 HISTORY OF SENSOR Ppt
27/37
Surface modification of nanoporous
membrane by graphene oxide
(1)Coating of the graphene oxide onto thenanoporous membrane by drop coating method.
Drop wise graphene is poured onto the membrane.
A thin film is obtained onto the membrane surface.
-
8/11/2019 HISTORY OF SENSOR Ppt
28/37
CH R CTERIZ TION OF GR PHENE CO TED
MEMBR NE BY SEM
The membranes categorized in two different classes-
(1) PCTE membrane was used as such
(2) PCTE membrane coated with graphene nanolayer over
the one surface of membrane with the help of drop coating
method.
-
8/11/2019 HISTORY OF SENSOR Ppt
29/37
Functionalization of graphenemodified membrane
-
8/11/2019 HISTORY OF SENSOR Ppt
30/37
cont... Graphene is incubated with linker molecule in
dimethylformamide (DMF). The linker-modified graphene then incubated with
antibody in Na2CO3-NaHCO3 buffer solution (pH 9.0)
overnight at 40
C, followed by rinsing with DI water andphosphate buffered saline solution (PBS). Raman spectroscopy in particular has been found to be a
valuable tool to elucidate the structural properties of
graphene.
-
8/11/2019 HISTORY OF SENSOR Ppt
31/37
Cont
Fig. 1 (A) Raman map and spectrum of graphene film. The map isconstructed by plotting the peak width at half height of the 2D-band asthe pixel intensity. Scale bar 0.8 mm. (B) AFM image of the graphenefilm. Scale bar 500 nm.This journal is The Royal Society of Chemistry 2011 J. Mater.
-
8/11/2019 HISTORY OF SENSOR Ppt
32/37
CHARACTERIZATION OF IMMOILIZED GRAPHEN
Electron microscopy (TEM and SEM) andatomic force microscopy have been used to
characterize the graphene.
FABRICATION OF
-
8/11/2019 HISTORY OF SENSOR Ppt
33/37
FABRICATION OFNANOIMMUNOSENSOR
(A) Fitting of immobilized membrane into glass cells.
(B) Development of appropriate electronic circuit.
(C)Recording of amperometric signals with proper Ab-
Ag actions.
-
8/11/2019 HISTORY OF SENSOR Ppt
34/37
ST ND RDIZ TION OF PROTOCOL OF
N NOIMMUNOSENSOR
(A)Recording of amperometric data.
(B)Digitalization of signals and recording.
-
8/11/2019 HISTORY OF SENSOR Ppt
35/37
CONCLUSION
-
8/11/2019 HISTORY OF SENSOR Ppt
36/37
conclusion In present work a graphene modified PCTE (polycarbonate Track
Etch)membrane is used in nanoimmunosensors which can be employed todetect specific cell membrane-associated target antigens.
The morphology of graphene modified nanoporous membrane wascharacterized by Scanning Electron Microscopy and chemical analysis wascompleted by FTIR (Fourier Transform Infrared Spectroscopy) prior to use innanobiosensor.
This antibody immobilized membrane structure was then tested with a no.of few antigens and cross checked by structurally related antigens forspecificity.
-
8/11/2019 HISTORY OF SENSOR Ppt
37/37