hitachi smartflex vrf gen i & gen ii installation...
TRANSCRIPT
™
VA R I A B L E R E F R I G E R A N T F L O W S Y S T E M S
VRF Gen I & Gen II Installation Course
HITACHI SMARTFLEX™
VRF GEN I & GEN II INSTALLATION COURSE
REQUIREMENTS:
No open toed shoes, shorts, skirts, and dresses are allowed while attending training. Hard hats, safety glasses and cut resistant gloves will be provided when attending training at an authorized training facility.
SmartFlex™ is a registered trademark of Johnson Controls, Inc.
and Hitachi SmartFlex products are manufactured by Hitachi, Ltd.
© 2018 Johnson Controls, Inc. P.O. Box 423, Milwaukee, WI 53201 Printed in the USA January 2018 www.johnsoncontrols.com
Please see the following policy documents for further details:
Johnson Controls VRF System One Day Installation On-Site Policy (P-090117)
Johnson Controls VRF System Certified Installer Policy (P-081717)
Johnson Controls Regional Technical Support Manager Commissioning Policy (C-0001 Rev. 2)
LOCATIONS:
• Authorized Johnson Controls North America VRF Training Facility
• Customer locations by request
OBJECTIVES
• This training includes both install requirements for Gen I and Gen II VRF system equipment to better serve our customers
• Acquire comprehensive knowledge and learn the proper procedures and techniques to complete the installation, pressure test, triple evacuation, and additional charge Hitachi SmartFlex™ VRF systems in this instructor-led class.
• Gain an understanding of the tools and resources available to support efficient, quality installations
• Learn proper piping configurations and best-practices
• Learn proper wiring requirements
• Learn how to safely and effectively install all indoor unit types
• Learn how to safely and effectively install all outdoor unit types
• Acquire and adhere to installation checklists
• Obtain the necessary documentation to properly install Hitachi SmartFlex VRF systems
This course certifies the student in the installation only and DOES NOT certify the participant in the VRF system startup, or commissioning process.
INTENDED AUDIENCE:
Mechanical contractors, installation mechanics, pipe fitters, building maintenance personnel, project managers and service technicians.
QUALIFICATIONS:
Companies are required to have at least one fully trained installation person on staff that has successfully completed the VRF System Installation Only class.
COURSE LENGTH: 8 hours
COURSE PREREQUISITES: None
Please contact the Johnson Controls VRF Training Department for local pricing and requirements (Email [email protected] for details.)
Date:
Time:
Address:
Contact:
March 6th 2018Wilsonville, OR
March 8th 2018Spokane, WA
March 13th 2018North Seattle, WA
March 15th 2018Bellevue, WA
LOCAL TRAINING DATES:
**CLICK HERE TO REGISTER ONLINE**