hmc1000 (v00.0411) - obsolete€¦ · for price, delivery and to place orders: hittite microwave...

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or [email protected]

FIL

TE

RS

- T

UN

AB

LE -

SM

T

1

HMC1000LP5Ev00.0411

FILTER - TUNABLE, BAND REJECT SMT3.6 - 12.2 GHz

Functional DiagramThe HMC1000LP5E is a MMIC band reject filter which features a user selectable band rejection frequency. The -20 dB filter bandwidth is < 10%. The rejection frequency can be varied between 3.6 and 12.2 GHz by applying an analog tune voltage between 0 and 14V. This tunable filter can be used as a much smaller SMT alternative to physically large switched filter banks and cavity tuned filters. The HMC1000LP5E has excellent microphonics due to the monolithic design, and provides a dynamically adjustable solution in advanced communications applications.

Typical Applications Features

General Description

The HMC1000LP5E is ideal for:

• Test & Measurement Equipment

• Military RADAR & EW/ECM

• SATCOM & Space

• Industrial & Medical Equipment

Tunable Stopband Frequency: 3.6-12.2 GHz

Tunable Stopband Rejection: 25 dB Typical

Four Frequency Control Modes

Single Chip Replacement For Mechanically Tuned Designs

32 Lead 5 x 5 mm SMT Package

Electrical Specifications, TA = +25 °C

Parameter Min. Typ. Max. Units

Rejection Band Tuning Range 3.6 12.2 GHz

Passband Frequency Range 0.1-25 GHz

Stopband Rejection 25 dB

Passband Insertion Loss 3 dB

Return Loss (passband and rejection band) 15 dB

Rejection Band Input IP3 (Pin = + 10 dBm) 23.5 dBm

Passband Input IP3 (Pin = + 10 dBm) 35 dBm

Input Power @ 5° Shift In Insertion Phase (Vt1 = Vt2 = 0V) 10 dBm

Input Power @ 5° Shift In Insertion Phase (Vt1 = Vt2 = 7V) 13 dBm

Input Power @ 5° Shift In Insertion Phase (Vt1 = Vt2 = 14V) >18 dBm

Frequency Control Voltage (Vfctl) 0 14 V

Source/Sink Current (Ifctl) ±1 mA

Residual Phase Noise [1] (100 kHz Offset) -162 dBc/Hz

Rejection Band, Fcenter Drift Rate -0.3 MHz/°C

Tuning Speed, Phase Settling to within 10° [2] < 200 ns

[1] Optimum residual phase noise performance requires the use of a low noise driver circuit.[2] Tuning speed includes 40 ns typical tuning voltage ramp from driver.

OBSOLETE

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D



FIL

TE

RS

- T

UN

AB

LE -

SM

T

2

HMC1000LP5E3.6 - 12.2 GHz


Broadband Insertion Loss vs. Vt

Broadband Return Loss (S22) vs. Vt

Rejection Vs. Temperature


Rejection Band, Fcenter Vs. Temperature

Rejection Bandwidth Vs. Vt1 = Vt2

-40

-35

-30

-25

-20

-15

-10

-5

0

0 2 4 6 8 10 12 14 16 18 20 22 24 26

INS

ER

TIO

N L

OS

S (

dB)

FREQUENCY (GHz)

0V 14V8V4V-40

-30

-20

-10

0

0 2 4 6 8 10 12 14 16 18 20 22 24 26

S11 0VS11 7VS11 14V

RE

TU

RN

LO

SS

(dB

)

FREQUENCY (GHz)

-40

-30

-20

-10

0

0 2 4 6 8 10 12 14 16 18 20 22 24 26

S22 0VS22 7VS22 14V

RE

TU

RN

LO

SS

(dB

)

FREQUENCY (GHz)

2

4

6

8

10

12

14

0 2 4 6 8 10 12 14

+25C+85C-40CR

EJE

CT

ION

BA

ND

, Fce

nter

(G

Hz)

Vt1 = Vt2 (Vdc)

20

25

30

35

40

45

50

0 2 4 6 8 10 12 14

+25C+85C-40C

RE

JEC

TIO

N (

dB)

Vt1 = Vt2 (Vdc)

0

5

10

15

20

25

30

35

40

45

50

0 2 4 6 8 10 12 14

- 10 dB BW

- 20 dB BW

BA

ND

WID

TH

(%

)

Vt1 = Vt2 (Vdc)

Tuning Mode 1, Full Band Frequency Tuning, (Vt1 = Vt2 = 0-14V)

OBSOLETE





FIL

TE

RS

- T

UN

AB

LE -

SM

T

3

HMC1000LP5E3.6 - 12.2 GHz


Broadband Insertion Loss vs. Vt Broadband return Loss (S11) vs. Vt

Rejection Band, Fcenter Vs. Temperature

Rejection Vs. Temperature Rejection Bandwidth Vs. Vt1


-40

-35

-30

-25

-20

-15

-10

-5

0

0 2 4 6 8 10 12 14 16 18 20 22 24 26

INS

ER

TIO

N L

OS

S (

dB)

FREQUENCY (GHz)

0V

14V

8V

4V

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

0 2 4 6 8 10 12 14 16 18 20 22 24 26

S11 0VS11 7VS11 14V

RE

TU

RN

LO

SS

(dB

)

FREQUENCY (GHz)

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

0 2 4 6 8 10 12 14 16 18 20 22 24 26

S22 0VS22 7VS22 14V

RE

TU

RN

LO

SS

(dB

)

FREQUENCY (GHz)

2

3

4

5

6

7

8

0 2 4 6 8 10 12 14

+25C+85C-40CR

EJE

CT

ION

BA

ND

, Fce

nter

(G

Hz)

Vt1 (Vdc)

20

25

30

35

40

45

50

0 2 4 6 8 10 12 14

+25C+85C-40C

RE

JEC

TIO

N (

dB)

Vt1 (Vdc)

0

5

10

15

20

25

30

35

40

0 2 4 6 8 10 12 14

- 10 dB BW

- 20 dB BW

BA

ND

WID

TH

(%

)

Vt1 (Vdc)

Tuning Mode 2, Low Band Tuning With Narrower Rejection Bandwidth (Vt1 = 0-14V, Vt2 = 0V)

OBSOLETE





FIL

TE

RS

- T

UN

AB

LE -

SM

T

4

HMC1000LP5E3.6 - 12.2 GHz


Broadband Insertion Loss vs. Vt

Broadband Return Loss (S22) vs. Vt Rejection Band, Fcenter Vs. Temperature

Rejection Bandwidth Vs. Vt2

Broadband return Loss (S11) vs. Vt

Rejection Vs. Temperature

-40

-35

-30

-25

-20

-15

-10

-5

0

0 2 4 6 8 10 12 14 16 18 20 22 24 26

INS

ER

TIO

N L

OS

S (

dB)

FREQUENCY (GHz)

0V 14V8V4V

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

0 2 4 6 8 10 12 14 16 18 20 22 24 26

S11 0VS11 7VS11 14V

RE

TU

RN

LO

SS

(dB

)

FREQUENCY (GHz)

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

0 2 4 6 8 10 12 14 16 18 20 22 24 26

S22 0VS22 7VS22 14V

RE

TU

RN

LO

SS

(dB

)

FREQUENCY (GHz)

6

7

8

9

10

11

12

13

14

0 2 4 6 8 10 12 14

+25C+85C-40CR

EJE

CT

ION

BA

ND

, Fce

nter

(G

Hz)

Vt2 (Vdc)

15

20

25

30

35

0 2 4 6 8 10 12 14

+25C+85C-40C

RE

JEC

TIO

N (

dB)

Vt2 (Vdc)

0

5

10

15

20

25

30

35

40

0 2 4 6 8 10 12 14

- 10 dB BW

- 20 dB BW

BA

ND

WID

TH

(%

)

Vt2 (Vdc)

Tuning Mode 3, High Band Tuning With Narrower Rejection Bandwidth (Vt1 = 14V, Vt2 = 0-14V)

OBSOLETE





FIL

TE

RS

- T

UN

AB

LE -

SM

T

5

HMC1000LP5E3.6 - 12.2 GHz


Tuning Mode 4, Rejection Bandwidth Tuning (Vt1 = 0V, Vt2 = 0-14V)

Broadband Insertion Loss vs. Vt Broadband Return Loss (S11) vs. Vt

Broadband return Loss (S22) vs. VtRejection Bandwidth Vs. TemperatureInsertion Loss = - 10 dB

Rejection Vs. Temperature, Vt2 = 14V Tuning Sensitivity Vs. Vt

-40

-35

-30

-25

-20

-15

-10

-5

0

0 2 4 6 8 10 12 14 16 18 20 22 24 26

INS

ER

TIO

N L

OS

S (

dB)

FREQUENCY (GHz)

0V

14V

8V

4V

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

0 2 4 6 8 10 12 14 16 18 20 22 24 26

S11 0VS11 7VS11 14V

RE

TU

RN

LO

SS

(dB

)

FREQUENCY (GHz)

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

0 2 4 6 8 10 12 14 16 18 20 22 24 26

S22 0VS22 7VS22 14V

RE

TU

RN

LO

SS

(dB

)

FREQUENCY (GHz)

1

2

3

4

5

6

7

8

9

10

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14

+25C+85C-40C

BA

ND

WID

TH

(G

Hz)

Vt2 (Vdc)

-35

-30

-25

-20

-15

-10

-5

0

0 2 4 6 8 10 12 14 16 18 20 22 24 26

+25C+85C-40C

INS

ER

TIO

N L

OS

S (

dB)

FREQUENCY (GHz)

0

200

400

600

800

1000

1200

1400

1600

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Mode 1Mode 2Mode 3Mode 4

SE

NS

ITIV

ITY

(M

Hz/

VO

LT)

Vt (Vdc)

OBSOLETE





FIL

TE

RS

- T

UN

AB

LE -

SM

T

6

HMC1000LP5E3.6 - 12.2 GHz


Rejection Band, Input IP3, Pin = +10 dBm

Passband, Input IP3 Pin = +10 dBm

Passband, Residual Phase Noise @ 4 GHz, Vt1 = Vt2 = 14V

10

15

20

25

30

35

40

45

50

0 2 4 6 8 10 12 14

+25C+85C-40C

INP

UT

IP3

(dB

m)

Vt1 = Vt2 (Vdc)

20

25

30

35

40

45

50

55

0 2 4 6 8 10 12 14

2 GHz18 GHz24 GHz

INP

UT

IP3

(dB

m)

Vt1 = Vt2 (Vdc)

Passband, Residual Phase Noise @ 17 GHz, Vt1 = Vt2 = 0V

-180

-170

-160

-150

-140

-130

-120

1e+2 1e+3 1e+4 1e+5 1e+6 1e+7

+25C+85C-40C

RE

SID

UA

L P

HA

SE

NO

ISE

(dB

c/H

z)

OFFSET FREQUENCY (Hz)

-180

-170

-160

-150

-140

-130

-120

1e+2 1e+3 1e+4 1e+5 1e+6 1e+7

+25C+85C-40C

RE

SID

UA

L P

HA

SE

NO

ISE

(dB

c/H

z)

OFFSET FREQUENCY (Hz)

Rejection Band, Insertion Phase vs. Pin Rejection Band, Fcenter vs. Pin

-25

-20

-15

-10

-5

0

5

10

15

20

25

0 2 4 6 8 10 12 14 16 18

VT1=Vt2=0VVt1=Vt2=7VVt1=Vt2=10VVt1=Vt2=14VIN

SE

RT

ION

PH

AS

E (

DE

GR

EE

S)

INPUT POWER (dBm)

-80

-60

-40

-20

0

20

40

60

80

0 2 4 6 8 10 12 14 16 18

Vt1=Vt2=0VVt1=Vt2=7VVt1=Vt2=10VVt1=Vt2=14V

FR

EQ

UE

NC

Y (

MH

z)

INPUT POWER (dBm)

OBSOLETE





FIL

TE

RS

- T

UN

AB

LE -

SM

T

7

HMC1000LP5E3.6 - 12.2 GHz


ELECTROSTATIC SENSITIVE DEVICEOBSERVE HANDLING PRECAUTIONS

Absolute Maximum Ratings

Four Operation Modes And The Control Conditions Reliability Information

Frequency Control Voltage (Vfctl) -0.5 to +15V

RF Power Input 28.5 dBm

Storage Temperature -65 to +150 °C

ESD Sensitivity (HBM) Class 1 A

Mode Vt1 Vt2 Description

I0 -14V

Vt1 = Vt20 -14V

Vt1 = Vt2Full band frequency tuning

II 0 - 14V 0 VLow band frequency tuning, with

narrower rejection bandwidth

III 14V 0 - 14VHigh band frequency tuning, with

narrower rejection bandwidth

IV 0 V 0 - 14V Rejection bandwidth tuning

Junction Temperature to Maintain 1 Million Hour MTTF

150 °C

Nominal Junction Temperature (T = 85 °C and Pin = 10 dBm)

86 °C

Thermal Resistance (Junction To Ground Paddle)

40° C/W

Operating Temperature -40 to +85 °C

OBSOLETE





FIL

TE

RS

- T

UN

AB

LE -

SM

T

8

HMC1000LP5E3.6 - 12.2 GHz


Outline Drawing

NOTES:

1. LEADFRAME MATERIAL: COPPER ALLOY

2. DIMENSIONS ARE IN INCHES [MILLIMETERS]

3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.

4. Pin BURR LENGTH SHALL BE 0.15 mm MAXIMUM.

Pin BURR HEIGHT SHALL BE 0.05 mm MAXIMUM.

5. PACKAGE WARP SHALL NOT EXCEED 0.05 mm.

6. ALL GROUND LEADS AND GROUND PADDLE MUST BE

SOLDERED TO PCB RF GROUND.

7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED

LAND PATTERN.

Part Number Package Body Material Lead Finish MSL Rating Package Marking [1]

HMC1000LP5E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H1000XXXX

[1] 4-Digit lot number XXXX[2] Max peak reflow temperature of 260 °C

Package Information

OBSOLETE





FIL

TE

RS

- T

UN

AB

LE -

SM

T

9

HMC1000LP5E3.6 - 12.2 GHz


Pin Descriptions

Application Circuit

Pin Number Function Description Interface Schematic

1-4, 7-11, 13, 15-18, 21-25, 27-32

N/CThe pins are not connected internally; however, all data

shown herein was measured with these pins connected to RF/DC ground externally.

5, 20, 26 GNDThese pins and exposed paddle

must be connected to RF/DC ground.

6 RFINThis pin is AC coupled and

matched to 50 Ohms.

12, 14 Vt1, Vt2 Center frequency control voltage.

19 RFOUTThis pin is AC coupled and

matched to 50 Ohms.

OBSOLETE





FIL

TE

RS

- T

UN

AB

LE -

SM

T

10

HMC1000LP5E3.6 - 12.2 GHz


Evaluation PCB

The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohms impedance while the package ground leads and exposed paddle should be con-nected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.

List of Materials for Evaluation PCB EVAL01-HMC1000LP5E [1]

Item Description

J1, J2 Connector, 2.9 mm, Jack

J3, J4, J5 DC Pin

U1HMC1000LP5E, Band Reject Filter-Tunable

PCB [2] 600-00121-00 Evaluation PCB

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Arlon 25FR or Rogers 25FR

OBSOLETE



hmc1000 (v00.0411) - obsolete€¦ · for price, delivery and to place orders: hittite microwave...

Documents