hnp mikrosysteme model mzr-4622 low pressure series · pdf fileapplications technical data...

2
Contact HNP Mikrosysteme GmbH Bleicherufer 25 · D-19053 Schwerin phone +49 385 52190-301 fax +49 385 52190-333 e-mail [email protected] http://www.hnp-mikrosysteme.de Low pressure series Micro annular gear pump mzr ® -4622 Dosing pump for analytical instrumentation Compact dimensions diameter 16 mm, length 88 mm Small dosage volumes, high flow rates smallest volume 2 μl – flow up to 72 ml/min High dosage precision precision CV 1 % at low volumes Long service life wear-resistant tungsten carbide Low pulsation delivery, low shear stress rotary micro annular gear technology The compact micro annular gear pump mzr-4622 of the low pressure series is an innovative pump concept for use in analytical instrumentation. The pump generates a low pulsation, highly precise flow featuring low shear stress. It dispenses at a high precision the lowest volumes in microliter range. Due to its compact design small dimensions have been achieved. The pump is suitable for dosage of low viscosity liquids such as deionized water, watery solutions, methanol, solvents, oil and lubricants. Applications Technical data Analytical instrumentation Flow rate 1.2 – 72 ml/min (min. 0.012 ml/min *) Fuel cells Smallest dosage volume 2 μl Laboratory automation Displacement volume 12 μl In vitro diagnostics Differential pressure range 0 – 5 bar (73 psi) Max. inlet pressure 1 bar (15 psi) Pulsation 6 % Operating temperature range -20 … +60 °C Viscosity range 0.3 … 100 mPas (max. 1000 mPas *) Precision 1 % Coefficient of Variation CV Speed range 100 – 6000 rpm (min. 1 rpm *) Fluid connection slip fittings with outside diameter 2 mm optional: manifold assembly Wetted parts stainless steel 316L, ceramics, tungsten carbide Ni-based, epoxy resin shaft seal: graphite-reinforced PTFE, stainless steel 316L static seals: FPM, optional: EPDM, FFPM Motor DC-motor with graphite brushes, assigned power rating 4.5 W, nominal voltage 24 V, digital magnet encoder 32 counts per turn Electrical connection 10-pole connector Dimensions diameter 16 mm, length 88 mm Weight approx. 100 g Customized solutions on request. * with optional high resolution encoder, gear box

Upload: hoangdan

Post on 06-Feb-2018

218 views

Category:

Documents


0 download

TRANSCRIPT

Contact HNP Mikrosysteme GmbH Bleicherufer 25 · D-19053 Schwerin

phone +49 385 52190-301 fax +49 385 52190-333

e-mail [email protected] http://www.hnp-mikrosysteme.de

Low pressure series Micro annular gear pump mzr®-4622 Dosing pump for analytical instrumentation

– Compact dimensions diameter 16 mm, length 88 mm

– Small dosage volumes, high flow rates smallest volume 2 μl – flow up to 72 ml/min

– High dosage precision precision CV 1 % at low volumes

– Long service life wear-resistant tungsten carbide

– Low pulsation delivery, low shear stress rotary micro annular gear technology

The compact micro annular gear pump mzr-4622 of the low pressure series is an innovative pump concept for use in analytical instrumentation. The pump generates a low pulsation, highly

precise flow featuring low shear stress. It dispenses at a high precision the lowest volumes in microliter range. Due to its compact design small dimensions have been achieved.

The pump is suitable for dosage of low viscosity liquids such as deionized water, watery solutions, methanol, solvents, oil and lubricants.

Applications Technical data

Analytical instrumentation Flow rate 1.2 – 72 ml/min (min. 0.012 ml/min *)

Fuel cells Smallest dosage volume 2 μl

Laboratory automation Displacement volume 12 μl

In vitro diagnostics Differential pressure range 0 – 5 bar (73 psi)

Max. inlet pressure 1 bar (15 psi)

Pulsation 6 %

Operating temperature range -20 … +60 °C

Viscosity range 0.3 … 100 mPas (max. 1000 mPas *)

Precision 1 % Coefficient of Variation CV

Speed range 100 – 6000 rpm (min. 1 rpm *)

Fluid connection slip fittings with outside diameter 2 mm optional: manifold assembly

Wetted parts stainless steel 316L, ceramics, tungsten carbide Ni-based, epoxy resin shaft seal: graphite-reinforced PTFE, stainless steel 316L static seals: FPM, optional: EPDM, FFPM

Motor DC-motor with graphite brushes, assigned power rating 4.5 W, nominal voltage 24 V, digital magnet encoder 32 counts per turn

Electrical connection 10-pole connector

Dimensions diameter 16 mm, length 88 mm

Weight approx. 100 g

Customized solutions on request. * with optional high resolution encoder, gear box

04/1

5

Dimensions

Dimensions are millimeters next to [inches].

Ribbon cable AWG 28DIN Connector 41651

Orientation of ribboncable not defined

Position of this flatsnot defined

2,8 ±0,05 ±0,002 ±0,0020,11 2,8 ±0,05 0,11

150 ±

55,906 ±

0,197

0,63

16

0,709

18

0,232

0,002

±0,059

6

0,004

81,8 ±1,5 3,221

+

4 -0,10

+0,05

0,157 -

20,079

Configuration with slip fittings OD 2 mm

DIN Connector 41651

cable not defined

Ribbon cable AWG 28

Orientation of ribbon

Position of this flatsnot defined

O-ring Ø2x1 (2x)

0,11

±0,001

0,118

2,8

0,984

±0,05

3

±0,002 ±0,0020,11

25

±0,05

180,709

32

25

0,984

1,26

±0,03

2,8

2x 3,4 0,134

0,059

±0,059

18

±0,008

0,571

1,5

150

±0,22

±5

0,748

84,2 ±1,5

14,5

5,906 ±

0,197

0,709

19

0,63

16

0,079

2

0,094

3,315

2,4

0,08

11 - -

0,1

0,20,433 - -0

,004

0,008

Dimensions are millimeters next to [inches].

Configuration with a manifold assembly M2.1

Subject to technical changes.

Flow charts

Liquid water Liquid oil

0

10

20

30

40

50

60

70

80

0 1 2 3 4 5

Differential pressure [bar]

Flo

w r

ate

[ml/

min

]

600050004000300020001000

Speed [rpm]

Viscosity 1 mPas

Liquid water

0

10

20

30

40

50

60

70

80

0 1 2 3 4 5

Differential pressure [bar]

Flo

w r

ate

[ml/

min

]

600050004000300020001000

Speed [rpm]

Viscosity 16 mPas

Liquid oil

Item number

11 04 01 03 low pressure series pump mzr-4622, with DC-motor, encoder 32 counts per turn, fluid connection slip fittings OD 2 mm

11 04 02 04 low pressure series pump mzr-4622 M2.1, with DC-motor, encoder 32 counts per turn, fluid connection manifold assembly

Accessories

Liquid supply accessories tubes, filters etc.

Control S-KD-22: control for continuous delivery

S-ND: programmable microcontroller-based control for continuous delivery and discrete dosage

Console drive module diecast aluminum chassis mzr-S06 for laboratory and testing

Multiplexer module simultaneous operation of up to 255 pumps with a single RS-232 interface Even if single parameters are within their indicated performance range, certain parameter combinations may not be achievable. Single parameters may exceed their indicated performance range under adequate circumstances. For detailed evaluation please contact HNP Mikrosysteme. Actual performance may vary. Specifications are subject to change without notice.

Micro annular gear pumps (and housings) are protected by assigned patents: DE 198 43 161 C2, EP 1115979 B1, US 6,520,757 B1, EP 852674 B1, US 6,179,596 B1, EP 1354135, US 7,698,818 B2. Patents pending: EP 1807546, DE 10 2009 020 942.5-24, DE 10 2011 001 041.6. In the US, Europe and China additional patents are pending. mzr®, MoDoS®, μ-Clamp® are registered German trademarks of HNP Mikrosysteme GmbH. Kalrez® Spectrum™ is a registered trademark of DuPont.

E Jackman
Typewritten Text
OFFICIAL UK DISTRIBUTOR: Michael Smith Engineers Limited www.michael-smith-engineers.co.uk freephone: 0800 316 7891