Evidence and Ordnance Lockup | Controlled Access Storage Rooms | Inventory Control | Holding Cells

IDEAL FOR

WIRECRAFTERS.COM | (800) 252-2636 | (502) 363-6691 | 6208 STRAWBERRY LANE | LOUISVILLE, KY 40214-2929

HOLDING CELLS & SECURED STORAGE

The system standards may be upgraded with any of the following: • Heavier 1-1/2” x 1-1/2“ 8 gauge woven wire mesh. • Tamperproof assembly hardware. • Larger 1-1/2” x 1-1/2” x 1/8” steel angle panel frames.

Heavy Duty Options

ECONOMICAL WIRE PARTITION STORAGE ENCLOSURES

LOCKS

WireCrafters wire partition system is used to build prisoner holding cells in police stations, courthouses & correctional facilities across the country. Our modular sized panels can be used to construct nearly any size enclosure. Generally a four-sided cell with 3’ x 7’ hinged door and ceiling is installed. Two or three sided cells may be installed where existing building walls are secure. Wire mesh ceiling panels are optional.

This application requires our heavy 3/8” assembly hardware to be installed on the outside of the enclosure.

WireCrafters standard mortise cylinder lock (pictured above), a self-locking device with spring action tongue, can be used in many applications. For holding cells we also offer an institutional high security dead latch lock.

SECURED STORAGE

Ver-16-11

STANDARD SPECIFICATIONS

WireCrafters wire partition system is ideal for creating secured storage areas. Rooms of any size or height can be constructed from our twenty standard size panels. A full line of hinged and sliding doors are available to meet your requirements. Customer designed, and standard slide-up service windows with counter are available for controlled issue stations.

PANELS• 2” x 1” 10 gauge woven wire mesh• 1-1/4” x 1-1/4” x 1/8” steel angle frame• 8’ & 10’ high panels

POSTS• 2” x 2” x 14 gauge steel tubing• 2” x 7” x 1/4” steel base plates• 8’-5 1/4”, 10’-5 1/4” & 12’-5 1/4” heights

DOORS• 2” x 1” 10 gauge woven wire mesh• 1-1/4” x 1-1/4” x 3/16” steel angle frame• Hinged & sliding doors available

BENCHES• Formed 10 gauge sheet metal• 4’, 6’ & 8‘ lengths• 1” diameter handcuff rail available

TYPICAL APPLICATIONS

EVIDENCE ROOMS TOOL STORAGE

TACTICAL GEAR STORAGE

ADDITIONAL APPLICATIONS • Munitions Storage

• Office File Archives

• Motor Pool Parts Areas

• Maintenance Cages