hollow fiber membrane - fivebro...hyperboloid mixer up to 4 kw to cover service area of 3 m2 - 22 m2...
TRANSCRIPT
HOLLOW FIBER MEMBRANE
Sewage Treatment Plants
Submerged Ultra Filtration
Hydrophilized membrane surface for easy handling and startup
STER
APORE�-�MBR
MITSUBISHI CHEMICAL
Dry Membrane which can be stored up to 36 months
Highest surface area module helps lowest footprint
Excellent chemical resistance
No need of backwash & reversible pump
No need to drain Membrane tank while cleaning
HOLLOW FIBER MEMBRANE
1
Advanced fouling resistive membrane elements speciallyresistive against biological fouling. which reduces numberof cleaning up to 50% along with up to 10% energy saving
FO
RT
ILIF
EC
R 1
00
FO
RT
ILIF
EX
C 7
0
Specially designed membranes for brine concentration,
able to achieve reject TDS level of ≤70,000 ppm withinstandard operating unit with maximizing RO recovery rate. It also has improved fouling resistance which reducespermeate flow rate decline.
FO
RT
ILIF
EX
C 8
0
Reliable and highly efficient to solve challenging water such
as waste water reuse, achieves reject TDS level of �
80,000 ppm within standards operating limits along with advantage of lower energy consumption and high fouling resistance.
FO
RT
ILIF
EX
C -
N
Special membrane for selective Ion separation which provides high water recovery and water reclamation. It leads to selective high monovalent ion passage coupled with high divalent and COD rejection. It leads to higher water recovery and low energy consumption.
CLEAN LESS, RECOVER MORE
PROTECT AGAINST FOULING
BREAKTHROUGH
TECHNOLOGY
REVOLUTION
STATE OF THE ART
SPECIALLY DESIGNED FOR THE WASTE
2
Innovative open channel spacer tube Ro/NF that demands low pre-treatment scheme.
Spiral wound structure with more membrane area upto 29 m2 (315 sqft), that allows high product ow.
salt rejection up to 99.5% available.
Operates upto 120 bar pressure for high TDS-High Concentration.
Most Suitable for high TDS-High Concentration, High BOD/CODWater.
Industrial waste water
Highly saline waste water
Landll leachate
High concentration of R.O Reject.
Every Drop We Count
Innovative disk type module with RO/NF membranes.
Open channel at feed reduces clogging and crystalisation
High Pressure design- models available from 70 bar up to 160 bar.
High recovery upto 90-95% possible.
Octagonal & circular sheets options available to meet customer demands.
Competition replacement membrane leaf & cushion available.
STR
OS
PA
CE
R T
UB
E R
.O
DTR
OD
ISK
TE
CH
NO
LOG
Y R
.O
SPECIALLY MEMBRANE PRODUCTS
3
MAGLEV HIGH-SPEED TURBO BLOWER
For aeration in Sewage treatment plant or Efuent treatment plantIn pneumatic conveying system to transfer dry powder Paper IndustryFood & BeveragesOil & GreasePharmaceutical & Chemical
1,800 to 39,600 m /hr
0.4 to 1.5 bar
3
Body : Stainless Steel
Impeller : High strength aluminum/titanium alloy
Bearing : Magnetic
ESU GING
Direct-coupled impeller connected to a high-speed permanentmagnet synchronous motor thus No contact, No friction, Nolubrication and hence transmission loss is eliminated.
Magnetic Bearing which has rotating parts levitated resulting in high speed and precise control of speed with life of 20 years.Which is better than Air cushion bearing which has contact withhousing resulting in lower life of 10 years.
100% radiographic testing and 115% over speed test to tested.
Turbo blower with variable frequency drive is controlled byintelligent control. system with On-site and remote monitoringoption.
100% Oil-free Easy maintenance, only lter changing is required.
Highly energy saving compared with conventional blowers.
Less vibration, less noise (<80db), providing a comfortable working environment.
High-speed turbo blower is skid-mounted which has smaller Foot print and very easy to install.
MAGLEV TURBO BLOWER
4
Body : Stainless Steel
Impeller : High strength aluminum/titanium alloy
Bearing : Magnetic
200 KW, 300 KW and 600 KW
40-70 KPa / 0.4 to 0.7 bar
ESU GING
MAGLEV HIGH-SPEED TURBO VACUUM PUMP
Consist of steam water separator ( ejector) & High speed pump
Direct-coupled impeller that is connected to a high-speedpermanent magnet synchronous motor.
No contact, No friction, No lubrication & hence transmission lossis eliminated.
Vacuum with variable frequency drive is controlled by intelligentcontrol system. On-site and remote control can be achieved.
100% Oil-free Easy maintenance, only lter changing is required
Highly energy saving compared with conventional Water Ringblowers and single stage vacuum pumps
Less vibration, less noise (<80db), providing a comfortable working environment
100% radiographic testing and 115% over speed tested.
Mainly in Pulp and paper Industry for maximizing sheet dryness and cleanliness from wire section to dryer
Food & Beverages
Oil & Grease
Pharmaceutical & Chemical
ESU
GIN
G
MAGLEV TURBO VACUUM PUMP
5
R
LANLING
SUBMERSIBLE MIXERS, PROPELLER, RAS PUMPS & AERATORS
Sub. Mixer with SS 316 propeller, SiC/SiC + C/SiC seals and CI or SS 316 motor
Sub. Flow Propeller with GRP Propeller , SiC/SiC + C/SiC seals and CI motor
Hyperboloid Mixer with GRP propeller and SS Shaft and CI motor
Sub. reflux pump with SS 316 impeller and CI motor
Sub. aerators with SS3 16 impeller and CI body with MS pipes for air sucking
Sub. Mixer up to 22KW with thrust up to 5400 N - submergence depth 20 mtrs. and max temp 40 C
Sub. Propeller up to 7.5KW with thrust up to 4295 N -submergence depth 20 mtrs. and max temp 40 C
Hyperboloid mixer up to 4 KW to cover service area of 3 m2 - 22 m2
Sub. Reflux Pump 1800 to 39600 m3/hr with 0.4-1.5 bar
Sub. Aerators Service area ranging from 2.8mØ to 16.0mØ Air output from 10 m3/hr for to 825 m3/hr
Sub. & Hyperboloid Mixers used in Anoxic & Anaerobic tanks as well as Sludge tanks
Sub. Flow maker used in oxidation ditch to maintain DO level
Sub. Reflux (RAS)Pumps For Activated sludge recirculation and for pumping of drainage water requiring very low head
Sub. aerators used in STP/ETP, aquaculture industries QFB used for natural pond aeration in Aquaculture industries
Sub. Mixer has self cleaning profile having 2 mech. seals,& leakage sensor, winding stator overload protection, cable entry sealing with Class F insulation & IP 68 protection
Sub. Flow Propeller like Sub. Mixer but very slow speed achieved by reduction gears
Sub. Hyperboloid Mixer has eight guided impellers with water entering in centre to ensure impellers is in balance during motion to produce Three-dimensional spiral flow
Sub. Reflux pump has high flow and very low head installed on the wall between clarifier and aeration tank, reducing power consumption as compared to conventional RAS pump with high flow high head
Sub. aerators is self suction type without need of blower to produce fine bubbles
6
DISC & TUBULAR TYPE DIFFUSER
7
Modular design
100% Non metallic material of construction
Smaller footprint
Easy cartridge replacement
Sea water desalination system
Water treatment system
Aqua culture
Housing/Cartridge: 10”,20”,40” & 60”
Filter precision: 1/5/10/20/50/100µ
Maximum differential pressure: 1.5 bar
Maximum operating pressure: 7 bar
Test pressure: 10.5 bar
AR C TW RO IDL GF EH SG I INH , PY LT AI TL EA DU CQ ON NOI F
S II G
C UE RR AP T IH OG NI H
GE REDI PR LT AR CA EMC EY NS TA E
O EN T SG UN RI ER- LT ES AU KR LH ET SD S
N PA E
G R
N FI OL RA MES A N% C00 E1
ATERM I AE LV I OS FO CR OR NO SC T RN
UO CN TI% O0 N0
1
LARGE FLOW LIQUID FILTRATION SYSTEM
8
High filtration efficiency with grooved discs
Easy in handing and installation
Non Corrosive solution
Automatic Disc Filtration
Suitable timer for Backwash
Low Backwash pressure is required
Very low Water for Backwash
Energy saving
Cooling tower pretreatment
Boiler pretreatment
Ion exchange pretreatment
Agricultural irrigation
Y & T TYPE MANUAL & AUTO DISC FILTERS
Micron: 130 (Mesh size: 120)
Working pressure : 2 - 8 Kg/cm2
Micron Rating : 20/50/100/130/200μ flow from auto filtration
Backwash pressure: 1.5 Kg/cm20Maximum operating temperature: <60 C
pH: 4-10
9
Solid-liquid Separation
Solid-liquid Separation JSHOEE
CentrifugeBelt PressFilter PressMul� Disk
ComparisonChart
√ X X X
Oily sludge √ X X √
Dewatering of Low Concentrated Sludge
√ X X XNo need for Thickener
24‐hour automa�c opera�on √ X X X
pS ace required ▲ ▲▲▲ ▲▲▲ ▲▲▲
Energy consump�on ▲ ▲▲▲ ▲▲▲ ▲▲▲
Labor intensive ▲ ▲▲▲ ▲▲ ▲
Noise ▲ ▲▲▲ ▲▲ ▲▲▲▲
Maintenance ▲ ▲▲ ▲▲▲ ▲▲▲
Running cost ▲ ▲▲▲ ▲▲▲ ▲▲▲▲
Cleaning ▲ ▲▲▲ ▲▲▲ None
Backwash water consump�on ▲ ▲▲ ▲▲▲▲ None
▲ Op�mum ▲▲�OK ▲▲▲�Bad ▲▲▲▲�Poor
Sludge Dewatering by multi Disc Screw Press Technology.
Self cleaning- automatic operation-no man power
Compact, easy to clean & operate machine
Low Power-Low RPM - Low Maintenance Variable frequency control for dewatering
No Screw pump required
Stainless Steel Material with high hardness alloy coating.
Capable To Operate Sludge From 2000 Mg/ltr Up To 50000 Mg Ltr
Various models for handling Liquid sludge from 0.5 m3/hr up to60 m3/hr and more.
Textiles & Tannery
Steel Pickeling
Pulp & Paper
Dyeing & Printing
Municipal Domestic Sewage
Dairy, Food & Beverages
Agriculture & Poultry Feed
Pharmaceuticals & PetrochemicalCoal & Carbon
MULTI DISK SCREW PRESS
10
Extremely low power consumption – 0.6kw/kg of Ozone
Special Plate type DG Ozone Ozonator design adopts efficientlydesigned uniform discharge gap between the plates resultinghighest efficiency
Produces Ozone concentration of 24.2% (160-180 mg/l)
50% less oxygen than conventional ozone generator
Modules Available with or without oxygen generator.
HMI option available
Hospitals & Hotels
Water & Waste water treatment
Waste gas & Flue treatment
Aquaculture & Swimming pool
Bottled water & Beverages
Clean Room / Dress change Room
HVAC & Cold Storage
5 grams/hr – 100 grams/hr.
100 grams/hr – 1,000 grams/hr.
1 kg/hr – 10 kg /hr. & more
STA
ND
AR
D M
OD
EL
RA
NG
ING
Ozonator
PLATE TYPE OZONATOR
11
N
WATER & WEST WATER INSTRUMENTS
NOBO-NEXUS
- Digital Dissolved Oxygen sensors
- Digital residual chlorine / Dissolved ozone sensor
- Digital Turbidity / MLSS / TSS sensor
- Digital Conductivity / pH / ORP / salinity sensor
Online Conductivity / Salinity / pH / ORP meter with 5 mtr. Sensor IP-57 / IP-65 enclosure with 4-20mA output signal.
Online Dissolved Oxygen meter (0-20 mg/l) with 5 mtr. Polarographic, galvanic or fluorescence optical sensor. IP-57 / IP-65 enclosure with 4 – 20mA output signal.
Online Turbidity / TSS / MLSS meter (0-10, 000 NTU / 0 -10,000 ppm) with 5 mtr. Flow type/ submerged type sensors. IP-65 enclosure with 4-20 mA output signal
Online Residual chlorine / Dissolved Ozone meter with 5 mtr. Polargraphic sensor and flow cell. IP-65 enclosure with 4-20 mA output signal
Online multi channel (pH / Conductivity / DO/MLSS/ Turbidity) meter up to 4 channel Polargraphic / galvanic sensors.
State of the Art “Digital Sensor” with
IP-68 enclosure, RS-485 and 4-20mA output for direct reading on PLC to avoid costly indicators, cabling & calibration
12
DEWATERING & SEWAGE SUBMERSIBLE PUMPS
13
DOSING PUMP
14
up to 25 years
RIGID PIPES, FITTINGS & VALVES
15
NOTE
16