home -ablerex singaporeablerex.com.sg/wp-content/uploads/2018/08/ablerex... · access to all...

35

Upload: others

Post on 26-Aug-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 2: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 3: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 4: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 5: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density

Ablerex │Three Phase UPS

Three Phase UPS System 100kVA-500kVA

◼ Up to 96% efficiency across a wide load range◼ Near-unity input power factor >0.99◼ Low input harmonic distortion <3%◼ Dual input Mains for independent control of power sources◼ Smart Rotation Redundancy optimized UPS reliability.◼ Intelligent burn-in Technology without load.◼ Large HMI Coloured LCD Touch Screen for advanced control

and monitoring

Page 6: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density

The BRIC M & BRC Series is a modular UPS ideal for medium to large sized power applications. With its modular structure,the true on-line, double conversion, three-phase UPS system offers a scalable and paralleable architecture for optimalpower designs.

The modular architecture offers a scalable solution by providing the ability to add or removepower modules when the load increases or decreases, ensuring that the UPS system alwaysoperate at optimum efficiency.

Furthering the advantages, the hot-swappable functionality of critical components and powermodules improve the serviceability of the UPS system thereby reducing Mean Time To Repair(MTTR) and ensuring power continuity should a module fails.

In parallel system configuration, the UPS System ensure the highest efficiency also at partial load rate conditions down to very low loadrate conditions - using Smart Rotation Redundancy. Each UPS automatically adjust the number of active power modules (PM) to sharethe load demand equally, putting the remaining power modules in a “sleeping mode”. With this feature, the active PM operate at a highereffective load percentage, thus improving the efficiency and reliability of the overall UPS System.

Overall Active System Capacity: 150kVAOverall Output Supply: 90kVAEffective Total Load Rate: 60%

Achieve Efficiency: 96% Load Demand: 90kVA

UPS 11 PM Active3 PMs SleepingOutput Supply: 30kVAEffective Load rate 60%

Efficiency: 96%

UPS 31 PM Active3 PMs SleepingOutput Supply: 30kVAEffective Load rate 60%

Efficiency: 96%

UPS 21 PM Active3 PMs SleepingOutput Supply: 30kVAEffective Load rate 60%

Efficiency: 96%

The flexibility of the power modules allows parallel expansion to achieve redundancy and to increase the total system capacity. Up to three UPS system can be paralleled without additional hardware.

88.0%

89.0%

90.0%

91.0%

92.0%

93.0%

94.0%

95.0%

96.0%

97.0%

11% 22% 33% 39% 50% 60% 70% 80% 90% 100%

Efficiency

Up to 96%

Load rate

The BRT series is an advanced 3 Phase tower UPS ideal for small and medium data centers. Seamlessly integrated into today's data center design, this design is easily and efficently serviceable, offers a scalable and paralleable architecture as demand grows.

Built-in Maintenance and Static Bypass switch prevents interruption by allowing load transfer to utility during overloads.

Parallel up to 1500kVA to increase the system’s total capacity and providing fail-safe redundancy, thus enhancing its fault managementcapability by preventing a single point of failure.

Featuring Smart Rotation Redundancy, each UPS automatically adjust the number of active subsystem to share the load demand equally, putting the remaining subsystems in a “sleeping mode”. This feature allows the active subsystems to maximise uptime and availability of the overall UPS System.

Soldering surface

Heat sinksComponents here

In order to optimize the performance of the power modules, themodules has an unique air flow design with directed airflow channel.Fans are specifically positioned to direct cool air over the componentsand heat sinks to increase heat dissipation. It prevent dust andmoisture from accumulating at the soldering points that could result inshort circuit.

The UPS is fully equipped with user-friendly monitoring and controls in various languages. A large coloured LCD touch screen provides direct controls and parameters displays on a single page view.

Equip with market largest Smart HMI, the 10.4inch Colored LCD Touch Screen provides real time information, enables direct control andaccess to all parameters and waveforms for management of the UPS System.

Multiples high power density subsystems comprise of advanced IGBT electronics with speed controlled cooling fans are integrated intothe compact UPS tower design. The design features of multiple subsystems is to facilitate ease of maintenance and repair, and spacesaving with a small footprint of 0.5m2 at 100kVA.

Taurus BRT 150kVA~200kVA

Taurus BRT 400kVA~500kVA

Taurus BRT 120kVA

Width 600mm

Width 650mm

Width 1300mm

Height1400mm

Depth980mm Depth

960mm

Height1600mm

Height2000mm

Depth1100mm

Flexible Modular Design

Air Flow Design

Parallel Architecture

Smart Rotation Redundancy

Smart Human Machine Interface

Smart Rotation Redundancy

Smart Human Machine Interface

Parallel Architecture

Built-in Maintenace and Static Bypass

IGBT Technology

Bric M & BRC Series Modular Online UPS (20kVA~500kVA) BRT33 Tower Online UPS (100kVA~500kVA)

50kVA

Sleeping mode

Active mode

Active mode

Sleeping mode

Sleeping mode

Sleeping mode

Active mode

200kVA 200kVA200kVA

50kVA

50kVA

Page 7: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density

Ablerex │Three Phase UPS

Power Module Model BRIC M-20P BRIC M-30P BRIC M-40P BRIC M-50P

Power Rating 20KVA/18kW 30KVA/27kW 40KVA/40kW 50KVA/45kW

Voltage, Phase

Voltage Range

Frequency

Power Factor

THDi

Voltage, Phase

Voltage Range

Frequency

Frequency Tolerance

Voltage, Phase

Voltage Tolerance

Power Factor 1.0 0.9

Frequency

Frequency Tolerance

Crest Factor

THDu

Protection Overload Capacity

DC Voltage

Number of batteries

Charging Power

VFI Mode

ECO Mode

Display

Built-in Communication

Optional Communication

Optional Add-ons

Power Module Dimension (mm) 440 (W) 590 (D) 134 (H) 440 (W) x 590 (D) x134 (H)

Power Module Weight 22kg 34kg 44kg 45kg

Protection Index

Noise (at 1 meter)

Operating Temperature

Operating Humidity

Safety and EMC

Markings

Cabinet Model Maximum Capacity Max. No. of Power Modules Cabinet Dimension (mm) Cabinet Weight Parallel Operations

BRIC M-60-20P 60kVA Up to 3 nos. x Bric M-20P 600 (W) 900 (D) 1100 (H) 105kg Up to 2 Cabinets

BRIC M-120-20P 120kVA Up to 6 nos. x Bric M-20P 600 (W) x 900 (D) x 1600 (H) 145kg Up to 2 Cabinets

BRIC M-200-20P 200kVA Up to 10 nos. x Bric M-20P 600 (W) x 900 (D) x 2000 (H) 179kg Up to 2 Cabinets

BRIC M-180-30P 180kVA Up to 6 nos. x Bric M-30P 600 (W) 1100 (D) 1600 (H) 165kg Up to 3 Cabinets

BRIC M-300-30P 300kVA Up to 10 nos. x Bric M-30P 600 (W) 1100 (D) 2000 (H) 220kg Up to 3 Cabinets

BRIC M-600-30P 600kVA Up to 20 nos. x Bric M-30P 2000 (W) 1100 (D) 2000 (H) 660kg No

BRIC M-80-40P 80kVA Up to 2 nos. x Bric M-40P 600 (W) 980 (D) 1150 (H) 115kg Up to 3 Cabinets

BRIC M-160-40P 160kVA Up to 4 nos. x Bric M-40P 650(W) 960 (D) 1600 (H) 165kg Up to 3 Cabinets

BRIC M-240-40P 240kVA Up to 6 nos. x Bric M-40P 650 (W) 970 (D) 2000 (H) 215kg Up to 3 Cabinets

BRIC M-400-40P 400kVA Up to 10 nos. x Bric M-40P 1300 (W) 1100 (D) 2000 (H) 900kg Up to 3 Cabinets

BRIC M-100-50P 100kVA Up to 2 nos. x Bric M-50P 600 (W) 980 (D) 1150 (H) 115kg Up to 3 Cabinets

BRIC M-200-50P 200kVA Up to 4 nos. x Bric M-50P 650 (W) 960 (D) 1600 (H) 165kg Up to 3 Cabinets

BRIC M-300-50P 300kVA Up to 6 nos. x Bric M-50P 650 (W) 970 (D) 2000 (H) 215kg Up to 3 Cabinets

BRIC M-500-50P 500kVA Up to 10 nos. x Bric M-50P 1300 (W) 1100 (D) 2000 (H) 900kg Up to 3 Cabinets

20% of UPS Capacity

Battery

>99%

>95%

110% for 60 minutes, 125% for 10 minutes, 150% for 1 minute, >150% for 200ms

36~44pcs configurable

±240Vdc (with +/N/- connections)

10.4" LCD Coloured Touch Screen

RS232, RS485, USB, Dry Contact

Parallel kit, Battery cold start kit (standard for 250kVA and above)

>96%

Standards and

Certifications

IEC/EN 62040-1 (Safety) and IEC/EN 62040-2 (EMC)

TUV-SUD

0~40C

Physical

510 (W) 700 (D) 178 (H)

IP20

72dB at 100% load; 62dB at 45% load

Environment0~95% (without condensation)

Input

Interface

System

380V / 400V / 415V, 3 Phase + N + G

304V ~478V line to line at full load

50Hz / 60Hz

≥0.99

<3%

380V / 400/V / 415V, 3 Phase + N

50/60Hz

±0.01% (free running)

SNMP Card, AS400

0.9

Ouput

Bypass

380/400/415V, 3 Phase + N + G

-20% to 15%

50/60Hz

±3Hz

3:1

<1% for linear load; <5.5% for non-linear load

±1.5%

BRIC M Series On-Line Modular UPS20KVA ~ 500KVA

Specification

◼ Bric M-180

◼ Bric M-300

◼ Bric M-400◼ Bric M-500

◆ Hot-Swappable Power Modules to reduce Mean Time to Repair (MTTR)

◆ High Power Density

◆ High Efficiency >96% in On-line mode

◆ High Input Power Factor >0.99

◆ Low Input Harmonic, THDi% <3%

◆ High Scalability supporting N+X redundancy

◆ Smart Sleep Mode for Energy Saving

◆ Advanced Operation Interface -- 10.4" Colored LCD Touch Screen

Page 8: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density

Ablerex │Three Phase UPS

Power Module Model

Power Rating

Voltage, Phase

Voltage Range

Frequency

Power Factor

THDi

Voltage, Phase

Voltage Range

Frequency

Frequency Tolerance

Voltage, Phase

Voltage Range

Power Factor

Frequency

Frequency Tolerance

Crest Factor

THDu

Protection Overload Capacity

DC Voltage

Number of batteries

Charging Power

VFI Mode

Backup Mode

ECO Mode

Display

Built-in Communication

Optional Communication

Parallel

Power Module Dimension (mm)

Power Module Weight

Protection Index

Noise (at 1 meter)

Operating Temperature

Operating Humidity

Safety and EMC

Markings

Cabinet Model Maximum Capacity Max. No. of Power Modules Cabinet Dimension (mm) Cabinet Weight Parallel Operations

BRC-150 150kVA Up to 6 nos. x BRC-25C 485 (W) x 900 (D) x 1072 (H) 140kg Up to 3 Cabinets

BRC-200 200kVA Up to 8 nos. x BRC-25C 482 (W) x 916 (D) x 1550 (H) 160kg Up to 3 Cabinets

Bypass

Physical

Up to 3 units

436 (W) 677 (D) 85 (H)

65dB

18kg

IP20

TUV-SUD

Standards and

Certifications

0~40C

50/60Hz

±0.1% (free running)

3:1

<1% for linear load; <6% for non-linear load

32~44pcs configurable

BRC-25C

25kVA/25kW

±240Vdc (with +/N/- connections)

Input

380V / 400V / 415V, 3 Phase + N + G

304V ~478V line to line at full load

40~70Hz

≥0.99

<3%

380/400/415V 3 Phase + N + G

Settable, -40% ~ +25%

50/60Hz

110% for 60 minutes, 125% for 10 minutes, 150% for 1 minute, >150% for 200ms

±1Hz, ±3Hz, ±5Hz (Setectable)

Battery

Output

±1% (Static Load)

380V / 400V / 415V, 3 Phase + N + G

IEC/EN 62040-1 (Safety) and IEC/EN 62040-2 (EMC)

1.0

>96%

10.4" Colorful LCD Touch Screen

RS232, RS485, Dry Contact

SNMP

>95%

>99%

Interface

System

Environment0~95% (without condensation)

20% of UPS Capacity

BRC Series On-Line Modular UPS25KVA ~ 200KVA

Specification

◼ BRC-150

◼ BRC-200

◆ Three-Phase Modular System designed for Rack Integration

◆ Hot-Swappable Power Modules to reduce Mean Time to Repair (MTTR)

◆ High Power Density

◆ High Efficiency >96% in On-line mode

◆ Low Input Harmonic, THDi% <3%

◆ High Scalability supporting N+X redundancy

◆ Advanced Operation Interface -- 10.4" Colored LCD Touch Screen

Page 9: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density

Model BRT33 100P BRT33 120P BRT33 150P BRT33 200P BRT33 250P BRT33 300P BRT33 400P BRT33 500P

Power Rating 100kVA/90kW 120kVA/108kW 150kVA/135kW 200kVA/180kW 250kVA/225kW 300kVA/270kW 400kVA/360kW 500kVA/450kW

Voltage, Phase

Voltage Range

Frequency

Power Factor

THDi

Voltage, Phase

Voltage Range 20% to 15%

Frequency

Frequency Tolerance

Voltage, Phase

Voltage Tolerance

Power Factor

Frequency

Frequency Tolerance

Crest Factor

THDu

Protection Overload

Voltage

Charging Power

VFI Mode >96% >95.5%

Backup Mode >96% >95%

ECO Mode

Display

Built-in Communication

Optional Communication

Optional Add-Ons

Parallel

Weight 210kg 266kg 305kg 350kg 445kg 490kg 810kg 900kg

Operating Temperature

Operating Humidity

Protection Grade

Noise (at 1 meter)

Safety and EMC

Markings

Input

InterfaceStandard: RS232, RS485, USB, Dry Contact

Battery

3:1

±0.01% (free running)

<3%

380/400/415V 3 Phase + N + G

±1.5%

0.9

50/60Hz

SNMP, AS400

10.4" Colorful LCD Touch Screen

<1% for linear load; <5.5% for non-linear load

110% for 60 minutes, 125% for 10 minutes, 150% for 1 minute, >150% for 200ms

±240Vdc (with +/N/- connections)

CE

Environment

0~40C

IEC/EN 62040-1 (Safety) and IEC/EN 62040-2 (EMC)Standards and

Certifications

Ablerex │Three Phase UPS

400V 3 Phase + N + G

+20%, -24%

45~70Hz

≥0.99

20% of UPS Capacity

>96%

System >96%

>99%

Parallel kit, Battery cold start (standard ofr 250kVA above), Lightning protection components, Dust filter, LBS

0~95% (without condensation)

IP20

<68dB at 100% load; 65dB at 45% load <72dB at 100% load; 69% at 45% load

Up to 1500kVA

650 (W) 960 (D) 2000 (H) 1300 (W) 1100 (D) 2000 (H)

Bypass

380/400/415V 3 Phase + G + N

50/60Hz

±1Hz, ±3Hz, ±5Hz (Setectable)

Ouput

PhysicalDimension (mm)

600 (W)

980 (D)

1150 (H)

600 (W)

980 (D)

1400 (H)

650 (W) 960 (D) 1600 (H)

BRT33 Series On-Line Tower UPS100KVA ~ 500KVA

Specification

◼ BRT33 150P◼ BRT33 200P

◼ BRT33 400P◼ BRT33 500P

◆ Front Access for operation and maintenace reduces Mean Time to Repair

(MTTR)

◆ High Power Density, Small Footprint

◆ High Efficiency >96% in On-line mode

◆ High Input Power Factor >0.99

◆ Low Input Harmonic, THDi% <3%

◆ Built in Backfeed Protection and Maintenance Switch

◆ Advanced Operation Interface -- 10.4" Colored LCD Touch Screen

Page 10: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 11: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 12: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 13: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 14: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 15: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 16: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 17: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 18: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 19: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 20: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 21: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 22: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density

Mars II SeriesConvertible Redundancy On-Line UPSMSII RT 4500VA~20000VA

■ Simple Parallel Installation

■ Full-time Digital Signal Processor Control

■ Frequency Converter Operation Mode

■ Smart ECO Mode

■ LCD Mimic Panel

■ Power Range and Runtime Scalability

■ Maintenance Bypass Switch Embedded

■ Optional Galvanic Isolation Transformer

■ Optional Hot Swappable Battery

Ablerex, Experts in Power Conversion|Single Phase UPS

Display

Alarms

Code Bat. Type Max. Quantities Dimensions (HxWxD, mm/inch)

Physical

Protection

Environmental

Interface

Standards and Certifications

Model MSII 20000 RTMSII 15000RTMSII4500RT MSII6000RT MSII6000C MSII8000RT / 8000PRT

MSII10000RT /10000PRT

MSII10000C

Voltage

Frequency

Power Factor

Voltage

Capacity

Frequency (Battery Mode)

Operating Temperature

Noise Level

Altitude

Humidity

Interface Type

Communication Slots

Compatible Platforms

Safety Standard

EMC Standard

Marks

Input

Output

0~40°C/ 32~104°F

1000m / 3280ft without Derating

20%~95%RH (Without condensation)

2nd RS232, USB, RS485, Relay Contact, SNMP/WEB Card

Microsoft Windows series, Linux, Mac, etc.

160~280Vac (1Φ) / 277 – 485Vac (3Φ)**160~280Vac 277~485Vac(3Φ)**

220/230/240Vac Selectable

440x220x720/ 17.3x8.6x28.2

36/79.2

<60dBA

Standard RS232 & EPO

EN62040-1-1

EN62040-2

CE

Battery

* Specifications subject to change without notice.** Based on load percentage.*** Standard configuration - back-up time at 70% of the load.

****Depending on the model and voltage, please contact Ablerex for more information.*****The same technical specification may be sold in different countries under different

model names, please consult Ablerex for more information.

UPS mode

Battery Bank SpecificationsMSII RT 4500 / 6000VA MSII RT 8000 / 10000VA MSII RT 4500 / 6000VA (ODIN) MSII RT 8000 / 10000VA (ODIN) MSII RT 15000 / 20000VA

C20J3U07C20N3U09C20J4U07C20N4U09C20V3U09

7AH9AH7AH9AH9AH

2020202020

132x440x680 / 5.2x17.3x26.8132x440x680 / 5.2x17.3x26.8176x440x550 / 6.9x17.3x21.7176x440x550 / 6.9x17.3x21.7132x440x680 / 5.2x17.3x26.8

1Φ, Line + Neutral + Ground3Φ, R, S, T + Neutral + Ground1Φ, Line + Neutral + Ground 3Φ, R, S, T + Neutral + Ground

Up to 0.95 at Linear LoadUp to 0.99(1Φ) / 0.95(3Φ) at Linear Load

200/208/220/230/240Vac Selectable(208/120Vac optional)

<50dBA

Standard RS232

EN62040-1-1, UL1778

EN62040-2, EN61000-3-2, EN61000-3-3, FCC Class A

CE, cUL, UL****

N.A. N.A. 4 hours to 90%

12V/7AH 12V/5AH

24/52.9 17.5/38.5 (ODIN) 52/114.6 45/99.2(8K/10KRT)

50/110.2 (8K/10KRTP) 96/211.2

440x88x680/17.3x3.5x26.8 440x132x550/

17.3x5.2x21.6 (ODIN)

440x176x680/17.3x6.9x26.8

440x264x680/17.3x10.3x26.8

440x132x680/ 17.3x5.2x26.8

12V/9AH

N.A. N.A. N.A.N.A. 4 hours to 90%

4050W 5400W 7200W 9000W 13500W 18000W

Inverter Supply: 105%~150% for 160 sec. ~ 2 cycles before switching bypass.

Bypass Supply: 105%~200% for 500 sec. ~8 cycles before stopping supply load.

www.ablerex.com.tw

■ MSII 10000VA RT■ Battery Bank

Dimensions (WxHxD, mm/inch)ODIN:Dimensions (Short Version)

Weight (kg/libs)ODIN:Weight (Short version)

45 ~ 65 Hz

±1Hz or ±3Hz (Selectable)

20pcs (without Battery in RT power module type)

240Vdc

Phase

Current Crest Ratio

Harmonic Distortion

Output Waveform

Transfer Time (AC to DC)

Efficiency

DC Start

Number of batteries

Type

Capacity

Rated Battery Voltage

Recharge Time

Status On LED + LCD

Readings on LCD

Self-Diagnostics

Audible and Visual

Overload Capacity

Short Circuit

EPO

Over Temperature

3:1

< 3% at Linear Load

Pure Sine Wave

0ms

Yes

Sealed Lead Acid Maintenance Free

105%~150% for 600sec. ~ 1 sec.before switching bypass.

105%~150% for 600sec. ~ 1 sec.before stopping supply load.

90% 91%

Line Mode, Backup Mode, ECO Mode, Bypass Supply, Battery Low, Battery Bad/Disconnect, Overload, and Transferring with interruption & UPS Fault.

Input Voltage, Input Frequency, Output Voltage, Output Current, Output Frequency, Load Percentage, Battery Voltage & Inner Temperature.

Upon Power-on, Front Panel Setting & Software Control, 24-hour routine checking

Line Failure, Battery Low, Transfer to Bypass, System Fault Conditions

Output Breaker/Electronic Circuit

Output shuts down immediately

AC Mode: Switch to Bypass / Backup Mode: Switch off the UPS

Page 23: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density

Mars III SeriesHigh Performance Redundancy On-Line UPSMSIII Tower (MSII PLUS) 4500VA~10000VAMSIII RT (MSII PLUS RT) 4500VA~10000VA

■ Rack/Tower Convertible Design

■ Power Factor 1.0

■ Patent Backup Runtime Estimation

■ Flexible Battery Configuration

■ Easy Parallel Installation

■ Frequency Converter Operation Mode

■ Smart ECO Mode

■ Generator Compatible Mode

■ Full-time Digital Signal Processor (DSP) Control

■ LCD Mimic Panel

■ Power Range and Runtime Scalability

■ Optional Galvanic Isolation Transformer Module / MTBS Box

Ablerex, Experts in Power Conversion|Single Phase UPS

* Specifications subject to change without notice, and the final explanation rights are reserved by Ablerex.** Depending on load percentage : 176-280 VAC, without derating ; 160-176 VAC, derating to 75% Load ; 110-160 VAC , derating to 50% Load*** Max. depending on number of battery. PF:1.0-10K(20S),6K(20S/18S/16S) ; PF:0.9/0.8-10K(18S),6K(14S) ; PF:0.7-10K(16S),6K(12S)**** Depending on the model and voltage, more information please contact with Ablerex.

www.ablerex.com.tw

■ MSIII10000RT■ MSIII10000RT

■ MSIII6000RT 4U ■ MSIII 4.5/6KVA (with TR) ■ MSIII 8/10KVA (with TR)

Battery Bank SpecificationsUPS model Code Max Battery number / String Max Battery Quantities Dimensions(HxWxD,mm)MSIII 4.5K~10K Tower BT602403 20 60 700x288x657 / 27.6x11.3x25.9MSIII 4.5K~6K RT BC202406 20 20 88x440x483.5 / 3.5x11.3x26.9MSIII 8K~10K RT BC202403 20 20 132x440x685 / 5.2x11.3x27

≦60dBA @ 1 Meter≦60dBA @ 1 Meter

1Φ, Line + Neutral + Ground

40~60Hz 50~70Hz ≦5%

Up to 0.99 @Linear Load

≦2% @ 100% Linear load≦3% @ 100% non-linear load(PF=0.9) ≦7% @ 100% non-linear load(PF=0.7)

110-280VAC

MODEL MSIII 4.5K / MSIII-RT 4.5K MSIII 6K / MSIII-RT 6K MSIII 8K / MSIII-RT 8K MSIII 10K / MSIII-RT 10K

Input Output 50HzOutput 60Hz

Output

4500VA/4500W 6000VA/6000W 8000VA/8000W 10000VA/10000Wwithout Transformer 200/208/220/230/240Vac, settable with Transformer 120/208 or 110/220 or 115/230 or 120/240

1

without Transformer ±1%with Transformer ±3%

(Synchronized Range) ±1Hz or ±3Hz (Selectable)3:1

Pure Sine Wave

Efficiency

without Transformer 93% 94%with Transformer 90% 91%without Transformer 98%with Transformer 94% 95%

Battery

12/14/16/18/20 16/18/20VRLA, Sealed Maintenance Free Lead Acid

4hours12/14/16 Model 2-step(CC-CV), 1.9A(max.) N/A16/18/20 Model 2-step(CC-CV), 1.7A(max.)

Display

Line Mode, Backup Mode, ECO Mode, Bypass Supply, Battery Low, Battery Bad/Disconnect, Overload, and Transferring with interruption & UPS Fault

Input Voltage, Input Frequency, Output Voltage, Output Current, Output Frequency, Load Percentage, Battery Voltage, Inner Temperature, Backup time estimationUpon Power-on, Manual control by panel & communication, self routine check

Alarm Line Failure / Battery Low / Transfer to Bypass / System Fault

Protection Overload, Over temperature, Short circuit, ABDM, overcharge

Function

Normal/ ECO/ CVCFYes

up to 4 units3+1

Physical

Dimensions (WxHxD, mm/inch) 240x509x700 / 9.5x27.6x20 288x509x700 / 11.3x20x27.6

Net Weight (kgs/lbs) 76/167 91/200Dimensions (WxHxD, mm/inch) 240x657x700 / 9.5x25.9x20 288x657x700 / 11.3x25.9x27.6

Net Weight (kgs/lbs) 119 / 262.3 133 / 293.2

Dimensions (WxHxD, mm/inch) 440x88x685 / 17.3x3.5x26.0 440x132x685 / 17.3x5.2x26.0

Net Weight (kgs/lbs) 18.5 / 40.8 21.5/47.4

Dimensions (WxHxD, mm/inch) 440x176x685 / 17.3x6.9x26.0 N/A

Net Weight (kgs/lbs) 60/132.3 (5Ahx20) N/ADimensions (WxHxD, mm/inch) 440x88x660 / 17.3x3.5x26.0 440x132x660 / 17.3x5.2x26.0

Net Weight (kgs/lbs) 42 / 92.6 58 / 127.9

Environmental

0~40°C/ 32~104°F20%~95%RH (Without condensing)

1000m/3280ft without Derating

InterfaceUSB, EPO/ROO

2nd RS232, USB, RS485, Dry Contact Relay, SNMP/WEB Cardmicrosoft Windows series, Linux, Mac, etc.

Standards and Certifications****

EN62040-1, UL1778EN62040-2, FCC part 15 Class A, EN61000-2-2, EN61000-3-2/3,

PhaseVoltage Range**

Frequency Range

Input Current DistortionInput Power FactorCapacity

Voltage

Output Power Factor***

Output Voltage Distortion

Output Voltage RegulationFrequency RangeCrest FactorOutput Waveform

Line Mode

High Efficiency ModeNumber of BatteryBattery TypeRecharge Time (to 90%)

Charger

Status On LED + LCD

Readings On LCD

Self-Diagnostics

Audible or Visual

Full Protection

Multi-ModeDC startParallel capacityParallel redundancy

Tower Model(with Batt)

Tower Model(with Transformer & Batt)

RT Model

RT Model(with Battery)

RT TransformerModule

Operation TemperatureOperation HumidityAltitudeNoise LevelStandardOptionCompatible PlatformsSafetyEMCMarks CE/TUV, cULus

Page 24: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 25: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 26: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 27: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 28: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 29: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 30: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 31: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 32: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 33: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 34: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density
Page 35: Home -Ablerex Singaporeablerex.com.sg/wp-content/uploads/2018/08/Ablerex... · access to all parameters and waveforms for management of the UPS System. Multiples high power density