TABLET®

& BLU.2QUICK REFERENCE CARD

PeopleNet Customer Support 888-346-3486

www.peoplenetonline.com

eDRIVER LOGS — HOURS OF SERVICE DOT

PeopleNet TABLET and eDriver Logs are registered trademarks of PeopleNet. ©2013 PeopleNet. All rights reserved. This information is subject to change without notice. Printed in U.S.A. 05/13 D-011-0505-AA

For a Roadside Inspection request for logs simply direct the officer to the Roadside icon from the Home screen. This will take them to the required information viewable at the device per the regulation.

Duty Status details for 1, 7, 8 or 15 days

Summary information for current day

Team Drivers

From the Summary View use the scroll bar to review information such as hours available, hours used, miles traveled, and other required information. Use the menu bar to move to a graph view.

In a co-driver situation use the Driver icon from the home screen then select the Change User icon to Switch active drivers. When finished use the home button and repeat the Roadside inspection process.

When viewing the graph use the 1, 7, 8 day menu bar icons for different views. Use the arrows to advance 1 day at a time. Use the detail icon to view all duty status changes for each day. All of these are available on the one touch menu bar.

Roadside Inspection Icon from Home Screen

78

6

99

7

9

A proactive warning is given to the driver one hour prior to running out of Driving or On Duty time. A second warning is given when the driver runs out of Driving or On Duty time. The system will warn the driver if attempting to exit a Sleeper Berth or Off Duty status within one hour before minimum requirements are met.

NOTEIf the Vehicle Management engine cable on your vehicle is not receiving data, you will be prompted to use paper logs.

CERTIFICATIONPeopleNet eDriver Logs meet federal regulations in the United States for Property and Passenger carriers and also supports US federal Oilfield regulations by the Dept. of Transportation (49 C.F.R. § 395.15) and in Canada below and above the 60th parallel and the following state regulations: TX: Texas Administrative Code (TAC), Title 37, Rule §4.12; CA: California Code of Regulations (CCR), Title 13, §§1201-1213; FL: Florida Statute 316.302 Hours of Service for Intrastate Transportation; AK: Alaska Administrative Code (AAC), Title 17, Chapter 25.

Instructions for viewing a driver’s current log information can be found under the Review HOS section.

DOT INSPECTIONS

Home Button The PeopleNet home icon is located in the upper left corner on most screens. This enables you to get back to the home screen with a single touch.

Status Icons The status icons are located in the lower left corner of the on screen display.

Information Bar The information bar includes the current date and time, as well as content provided by applications such as Automated Workflow, or the Login Manager. For instance, the information bar may display distance and direction to a location, or the name of the active user.

Soft Keyboard Button The Soft Keyboard Button is displayed in the far right application button row. Selecting this brings up the onscreen soft keyboard.

Soft Keyboard Hard Key The Soft Keyboard Hard Key is used to access the onscreen soft keyboard.

TABLET Keypad Buttons The TABLET buttons are used for data input, controlling settings, power on/off, and other functions.

Back Button The Back arrow icon is located in the upper right corner on most screens. This enables you to get back to the screen you were just on for easy navigation.

TABLET LEDs The TABLET LEDs (Light Emitting Diodes) are located along the top edge of the TABLET device.

BLU.2 Device Buttons The BLU.2 buttons are used for accessing the soft keyboard, and power on/off.

8

9

7

6

LOGIN LOGOUT

Location – to remark or note location change. Remarks – to add any additional remarks. Upon login completion your Home screen will appear. From here use the icons to navigate through daily activities.

During the day use the eDriver Logs® screen to make annotations, updates, regulation changes, and to request log copies to be faxed or emailed to a Roadside Inspector.

Enter your Driver ID and Password. Press the OK button.1 From Home screen select the Driver icon.1Select Duty Status icon. Note: Use the

auto remarks for on duty description.2 Select the LOGOUT icon.2Next, select Yes or No to certify all previous logs.3 Review all login information here and use

the Menu Bar for required changes like trailer and shipping information. Press OK.

4

Review Logout information on confirmation screen. Use Menu Bar to make any changes, press OK.

Complete the eDVIR form if prompted during Logout.

5 6

DRIVER QUICK START GUIDE

Regulations – to change available regulations. Load – to change or update trailer/shipping information.

Select Duty Status icon for Logout.4 Fill out the eDVIR form if required by carrier. Press the Next button to complete the login process.

5 Select YES to leave the vehicle. Press NO to Logout only.3

NOTEUse the Menu bar to navigate to all of the following screens to make changes during the login process.

WARNING If using a Tablet device, LOGIN, LOGOUT and HOS data may not be accurate if the device is Un-Docked during eDriver Log events. Federal Regulations require device to be connected to ECM of the vehicle.